ath6kl: remove all the wext and super extended private ioctl crap
This removes all the wext and super extended ioctl crap.
The wext interfaces are already provided by cfg80211 and
the "private" ioctl stuff defined here is not even using
private wext, they are using netdev private ioctls!
This is completely unacceptable upstream. Die. Die Die.
As part of all this we end up removing the
CONFIG_HOST_GPIO_SUPPORT which ended up being heavily
abused by the internal ioctl work.
Cc: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
To get upstream we can't use out of tree defines, kill
all the androidisms. ath6kl won't be usable on Android
unless external patches are supported later or Android
gets their shit together and gets all their crap upstream.
Cc: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ath6kl: remove Bluetooth PAL code and WMI ACL TX/RX data support
ath6kl used to have an internal PAL for Bluetooth 3.0 support
but this is no longer supported. The target used a WMI with an
ACL header for supporting these frames. Userspace would use
the ioctl AR6000_XIOCTL_ACL_DATA to send data to the target
and the firmware would generate ACL frames.
Remove both the parsing of the frames and the ioctl support.
We leave a warning for now for if the target generates some
sort of ACL data frame, later on we can remove this warning
once we have proven the target is no longer generating these
frames. It should be noted this also provides a fix for the
processing of spurious ACL data frames from the target,
previously they would not be dropped if they were generated
by the target but EXPORT_HCI_PAL_INTERFACE was not compiled
in.
The check for SET_NETDEV_DEV is not required given that
this is upstream. The setting of the SET_NETDEV_DEV with
the osDevInfo.pOSDevice is redundant for the cfg80211 case
as this was already being done, so just set the netdev device
for the non-cfg80211 which was missing.
Cc: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Fri, 25 Mar 2011 10:26:01 +0000 (11:26 +0100)]
staging: brcm80211: remove support functions for older chipsets from bcmsrom
The source file contained functions for both older and current chipsets
but the brcmsmac driver does not support the older chipsets so those
functions are removed.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Fri, 25 Mar 2011 10:26:00 +0000 (11:26 +0100)]
staging: brcm80211: remove conditional BCMSDIO code from bcmsrom.c
The source file is only used by the softmac driver and will never be
compiled with the BCMSDIO flag enabled so there is no need to have code
ifdef for this flag.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Fri, 25 Mar 2011 10:25:57 +0000 (11:25 +0100)]
staging: brcm80211: replace si_* calls with ai_* calls in brcmsmac driver
The brcmsmac only supports chips with amba silicon interconnect so no
abstraction is required. The siutils functions will be removed from the
brcmsmac driver and this commit does easy replacement of siutils functions
that simply delegate to the corresponding aiutils function.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Fri, 25 Mar 2011 10:25:54 +0000 (11:25 +0100)]
staging: brcm80211: cleanup si_doattach function for fullmac
si_doattach for the fullmac driver is selected using BCMSDIO
flag. Within the function there are #ifdef BRCM_FULLMAC but
this is implicitly true so these have been removed and the
function itself is now between #ifdef BRCM_FULLMAC instead of
BCMSDIO.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Fri, 18 Mar 2011 10:09:35 +0000 (11:09 +0100)]
staging: brcm80211: cleaned up TODO file
Brought TODO file in line with current driver state. Moved longer
term TODO items (the ones to be done once this driver
hits mainline) to website. Removed the bugs that have been solved.
Added new TODO items.
Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Fri, 18 Mar 2011 10:09:34 +0000 (11:09 +0100)]
staging: brcm80211: revised README
Removed duplicated text sections in README. Removed Bugs/problems that no longer
occur. One brcmsmac instability remains, (to be solved with new ucode), that has
been moved to the TODO file.
Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Fri, 18 Mar 2011 10:09:33 +0000 (11:09 +0100)]
staging: brcm80211: moved several README items to website
Intended audience for the README file are users of the driver.
Information only interesting to developers has been moved out of
the file and placed on the website:
Code cleanup. Preprocessor flag BCMDBG_FORCEHT is never defined,
is a debug feature, so ifdeff'ed code has been removed. The removed
section would force the backplane clock on HT rate, which
facilitates debug but has a negative effect on power usage.
Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 15 Mar 2011 13:51:05 +0000 (14:51 +0100)]
staging: brcm80211: code cleanup
Removed inactive code sections (BCM_DMAPAD and CHIPC_UART_ALWAYS_ON
were never defined). Also replaced magic number by #define. Deleted
incorrect comment.
Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hank Janssen [Tue, 29 Mar 2011 20:58:47 +0000 (13:58 -0700)]
staging: hv: Replace DPRINT with natives in hv_vmbus
Replace all remaining DPRINT calls (excluding the ringbuffer debug
which is going to be done in a next set of patches) with their
native pr_ calls. And also changed some of the printouts to be more
useful.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hank Janssen [Tue, 29 Mar 2011 20:58:44 +0000 (13:58 -0700)]
staging: hv: Remove all unneeded DPRINT from hv_vmbus
Remove all un-needed DPRINT calls from hv_vmbus. Several
are remaining that will be cleaned up in my next set of patches.
They deal with printing out the ringbuffer debugging which is
going to be implemented slightly differently.
This patch deals with hv_vmbus only.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that all duplicate state has been eliminated from
struct hv_storvsc_request and all needed state has been moved
to struct storvsc_request_extension, get rid of
struct hv_storvsc_request and rename struct storvsc_request_extension
as struct hv_storvsc_request. Cleanup and consolidation
of I/O request state is now complete.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:42 +0000 (09:33 -0700)]
Staging: hv: Get rid of the status field from struct hv_storvsc_request
In preparation of consolidating all I/O request state,
get rid of the status field from struct hv_storvsc_request
and instead use the state in the struct vmscsi_request directly.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:41 +0000 (09:33 -0700)]
Staging: hv: Move on_io_completion() from struct hv_storvsc_request
In preparation of consolidating all I/O request state, move
the on_io_completion() field from struct hv_storvsc_request to
struct storvsc_request_extension.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:38 +0000 (09:33 -0700)]
Staging: hv: Get rid of sense_buffer_size from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
sense_buffer_size field from struct hv_storvsc_request and instead
hardcode this value as is currently done.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:37 +0000 (09:33 -0700)]
Staging: hv: Get rid of cdb from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
cdb field from struct hv_storvsc_request and instead
directly copy the command into struct vmscsi_request.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:36 +0000 (09:33 -0700)]
Staging: hv: Get rid of the cdb_len from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
cdb_len field from struct hv_storvsc_request and instead use the
equivalent state in struct vmscsi_request - cdb_length field.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:35 +0000 (09:33 -0700)]
Staging: hv: Get rid of lun_id from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
lun_id field from struct hv_storvsc_request and instead use the
equivalent state in struct vmscsi_request - lun field.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:34 +0000 (09:33 -0700)]
Staging: hv: Get rid of the target_id from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
target_id field from struct hv_storvsc_request and instead use the
equivalent state in struct vmscsi_request - target_id field.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:33 +0000 (09:33 -0700)]
Staging: hv: Get rid of the bus field from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
bus field from struct hv_storvsc_request and instead use the
equivalent state in struct vmscsi_request - path_id field.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:32 +0000 (09:33 -0700)]
Staging: hv: Get rid of the host field from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
host field from struct hv_storvsc_request and instead use the
equivalent state in struct vmscsi_request - port_number field.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:31 +0000 (09:33 -0700)]
Staging: hv: Get rid of the type field from struct hv_storvsc_request
In preparation for consolidating all I/O request state, get rid of the
type field from struct hv_storvsc_request and instead use the
equivalent state in struct vmscsi_request - data_in field.
In the current code there is a call to zero out the struct vstor_packet in
stor_vsc_on_io_request(). So, to be able to directly set the state in the
vstor_packet in blkvsc_drv.c and storvsc_drv.c, get rid of the call to
zero out the packet in stor_vsc_on_io_request() and instead allocate the
request structure that has been zeroed out.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Mon, 28 Mar 2011 16:33:28 +0000 (09:33 -0700)]
Staging: hv: Get rid of request_ext_size from struct storvsc_driver_object
Now that struct storvsc_request_extension is part of struct hv_storvsc_request
get rid of the field request_ext_size from struct storvsc_driver_object.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Wed, 23 Mar 2011 17:50:21 +0000 (10:50 -0700)]
Staging: hv: Move the definition of struct storvsc_device
In preparation for getting rid of the inclusion of storvsc.c from
blkvsc.c, move the definition of struct storvsc_device
from storvsc.c to storvsc_api.h.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Wed, 23 Mar 2011 17:50:20 +0000 (10:50 -0700)]
Staging: hv: Move the definition of struct storvsc_request_extension
In preparation for getting rid of the inclusion of storvsc.c from
blkvsc.c, move the definition of struct storvsc_request_extension
from storvsc.c to storvsc_api.h.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Tue, 15 Mar 2011 22:03:34 +0000 (15:03 -0700)]
Staging: hv: Cleanup irq management
Now that vmbus_driver is a pci driver,
cleanup the irq allocation mess by using the standard
irq allocation mechanisms.
Note that this patch generates an error when the checkpatch
script is run because of the IRQF_SAMPLE_RANDOM flag used in
request_irq() function. This interrupt may be the only
external event this VM will get and consequently if this
flag (IRQF_SAMPLE_RANDOM) is not specified, experimentally
we have shown that the entropy in the VM will very very low.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Mike Sterling <mike.sterling@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Tue, 15 Mar 2011 22:03:33 +0000 (15:03 -0700)]
Staging: hv: Cleanup root device handling
Now we can complete the cleanup of the root device
management - use the pci device as the root device for
all Hyper-V devices. As part of this cleanup get rid
of the root device object from vmbus_driver_context.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Mike Sterling <mike.sterling@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Tue, 29 Mar 2011 19:09:30 +0000 (12:09 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits)
mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE
mmc: tmio_mmc: Move some defines into a shared header
mmc: tmio: support aggressive clock gating
mmc: tmio: fix power-mode interpretation
mmc: tmio: remove work-around for unmasked SDIO interrupts
sh: fix SDHI IO address-range
ARM: mach-shmobile: fix SDHI IO address-range
mmc: tmio: only access registers above 0xff, if available
mfd: remove now redundant sh_mobile_sdhi.h header
sh: convert boards to use linux/mmc/sh_mobile_sdhi.h
ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h
mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver
sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD
mmc: tmio: split core functionality, DMA and MFD glue
mmc: tmio: use PIO for short transfers
mmc: tmio-mmc: Improve DMA stability on sh-mobile
mmc: fix mmc_app_send_scr() for dma transfer
mmc: sdhci-esdhc: enable esdhc on imx53
mmc: sdhci-esdhc: use writel/readl as general APIs
mmc: sdhci: add the abort CMDTYPE bits definition
...
Linus Torvalds [Tue, 29 Mar 2011 18:43:30 +0000 (11:43 -0700)]
Merge branch 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv
* 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv:
FRV: Use generic show_interrupts()
FRV: Convert genirq namespace
frv: Select GENERIC_HARDIRQS_NO_DEPRECATED
frv: Convert cpu irq_chip to new functions
frv: Convert mb93493 irq_chip to new functions
frv: Convert mb93093 irq_chip to new function
frv: Convert mb93091 irq_chip to new functions
frv: Fix typo from __do_IRQ overhaul
frv: Remove stale irq_chip.end
FRV: Do some cleanups
FRV: Missing node arg in alloc_thread_info_node() macro
NOMMU: implement access_remote_vm
NOMMU: support SMP dynamic percpu_alloc
NOMMU: percpu should use is_vmalloc_addr().
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry
watchdog: fix nv_tco section mismatch
watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase.
watchdog: Convert release_resource to release_region/release_mem_region
watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
Linus Torvalds [Tue, 29 Mar 2011 17:46:15 +0000 (10:46 -0700)]
Merge branch 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits)
gpio: ab8500: Mark broken
genirq: Remove move_*irq leftovers
genirq: Remove compat code
drivers: Final irq namespace conversion
mn10300: Use generic show_interrupts()
mn10300: Cleanup irq_desc access
mn10300: Convert genirq namespace
frv: Use generic show_interrupts()
frv: Convert genirq namespace
frv: Select GENERIC_HARDIRQS_NO_DEPRECATED
frv: Convert cpu irq_chip to new functions
frv: Convert mb93493 irq_chip to new functions
frv: Convert mb93093 irq_chip to new function
frv: Convert mb93091 irq_chip to new functions
frv: Fix typo from __do_IRQ overhaul
frv: Remove stale irq_chip.end
m68k: Convert irq function namespace
xen: Use new irq_move functions
xen: Cleanup genirq namespace
unicore32: Use generic show_interrupts()
...
projects / linux-beck.git / log