The mma9551 functions that read/write word arrays from the
device have a limit for the buffer size given by the device
specifications.
Check that the requested buffer length is within required limits
when transferring word arrays. This will prevent buffer overrun
in the mma9551_read/write_*_words functions and also in the
mma9551_transfer call when writing into the MBOX response/request
structure.
iio: accel: mma9553: fix endianness issue when reading status
Refactor code for simplicity and clarity.
This also fixes an endianness issue with the original code.
When reading multiple registers, the received buffer of
16-bytes words is little endian (status, step count). On
big endian machines, casting them to u32 would result in
reversed order in the buffer (step count, status) leading
to incorrect values for step count and activity.
Alban Bedel [Mon, 20 Apr 2015 11:57:18 +0000 (13:57 +0200)]
iio:st_sensors: Fix oops when probing SPI devices
In SPI mode the transfer buffer is locked with a mutex. However this
mutex is only initilized after the probe, but some transfer needs to
be done in the probe.
To fix this bug we move the mutex initialization at the beginning of
the device probe.
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Denis Ciocca <denis.ciocca@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Thomas Betker [Wed, 15 Apr 2015 19:11:50 +0000 (21:11 +0200)]
iio: adc: xilinx: Fix VREFN sign
The VREFN channel is bipolar, not unipolar. Small negative values do
occur (e.g., -1mV), and unsigned conversion maps them incorrectly to
large positive values (about +1V), so fix this.
Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently in_proximity_(null)_raw is getting presented as raw sysfs
attribute. Same with the scan_elements.
The modifier doesn't apply to this channel.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jacob Pan [Mon, 6 Apr 2015 18:38:20 +0000 (11:38 -0700)]
iio/axp288_adc: add missing channel info mask
Commit 65de7654d39c70c2b ("iio: iio: Fix iio_channel_read return if
channel havn't info") added a check for valid info masks.
This patch adds missing channel info masks for all ADC channels.
Otherwise, iio_read_channel_raw() would return -EINVAL when called
by consumer drivers.
Note that the change of _processed to _raw actually fixes an ABI abuse
in the original driver where it was used to avoid some special handling
rather than because it was correct.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.
Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: fix filling routing table from OF description
According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.
However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.
This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.
To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.
This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem - two more tweaks for ALPS driver to
work out kinks after splitting the touchpad, trackstick, and potential
external PS/2 mouse into separate input devices.
Changes to support ALPS SS4 devices (protocol V8) will be coming in
4.1..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - document stick behavior for protocol V2
Input: alps - report V2 Dualpoint Stick events via the right evdev node
Input: alps - report interleaved bare PS/2 packets via dev3
ipv6: protect skb->sk accesses from recursive dereference inside the stack
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Hans de Goede [Sat, 4 Apr 2015 00:20:05 +0000 (17:20 -0700)]
Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.
Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.
This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:14:40 +0000 (17:14 -0700)]
Input: alps - report interleaved bare PS/2 packets via dev3
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.
This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.
This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.0-rc6. Nothing
major, some xhci fixes for reported problems, and some usb-serial
device ids.
All have been in linux-next for a while"
* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
usb: xhci: handle Config Error Change (CEC) in xhci driver
USB: keyspan_pda: add new device id
USB: ftdi_sio: Added custom PID for Synapse Wireless product
Merge tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes, well, really all just IIO driver
fixes, for 4.0-rc6. They fix issues that have been reported with
these drivers.
All of these patches have been in linux-next for a while"
* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: adc: vf610: use ADC clock within specification
iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
iio: core: Fix double free.
iio:inv-mpu6050: Fix inconsistency for the scale channel
staging: iio: dummy: Fix undefined symbol build error
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
staging: iio: hmc5843: Set iio name property in sysfs
iio: bmc150: change sampling frequency
iio: fix drivers that check buffer->scan_mask
Merge tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 serial driver fixes for 4.0-rc6. They fix some reported
issues with the samsung and fsl_lpuart drivers.
All have been in linux-next for a while"
* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: clear receive flag on FIFO flush
tty: serial: fsl_lpuart: specify transmit FIFO size
serial: samsung: Clear operation mode on UART shutdown
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for ALPS driver for issue introduced in the latest update and a
tweak for yet another Lenovo box in Synaptics.
There will be more ALPS tweaks coming.."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: define INPUT_PROP_ACCELEROMETER behavior
Input: synaptics - fix min-max quirk value for E440
Input: synaptics - add quirk for Thinkpad E440
Input: ALPS - fix max coordinates for v5 and v7 protocols
Input: add MT_TOOL_PALM
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization
fix, a reboot quirk and a kgdb fixlet"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
MAINTAINERS: Change the x86 microcode loader maintainer
firmware: dmi_scan: Prevent dmi_num integer overflow
Nicolas Dichtel [Fri, 3 Apr 2015 10:02:37 +0000 (12:02 +0200)]
netns: don't allocate an id for dead netns
First, let's explain the problem.
Suppose you have an ipip interface that stands in the netns foo and its link
part in the netns bar (so the netns bar has an nsid into the netns foo).
Now, you remove the netns bar:
- the bar nsid into the netns foo is removed
- the netns exit method of ipip is called, thus our ipip iface is removed:
=> a netlink message is built in the netns foo to advertise this deletion
=> this netlink message requests an nsid for bar, thus a new nsid is
allocated for bar and never removed.
This patch adds a check in peernet2id() so that an id cannot be allocated for
a netns which is currently destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 31 Mar 2015 08:58:55 +0000 (11:58 +0300)]
Staging: rtl8192u: use correct array for debug output
This is supposed to be ->rates_ex[] instead of ->rates[]. I found this
because static checkers complain than ->rates is too small so we're
reading beyond the end of the array. It has 12 elements instead of 15.
This bug was apparently copy and pasted from ipw2x00. I fixed it before
in that driver 428e3cf5f98c ('ipw2x00: printing the wrong array in
debug code')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Multiline comments use "network subsystem comment style"
- Merge short multiline comments
- Remove empty comments
- Remove function name comment at the end of small (<1 screen) functions
- Reformat 802.11 data frame format to use spaces and network format
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:58 +0000 (21:07 -0400)]
staging: rtl8723au: Remove unneeded comments
This commit removes a number of unneeded comments. Two of the
aforementioned comments were most likely meant to aid with version
control, whereas the remaining two comments relate to (now unused)
local variable names.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:57 +0000 (21:07 -0400)]
staging: rtl8723au: Use __func__ in trace logs
Rework the trace log-related lines in rtl8723au's rtw_security.c
to use the __func__ GCC magic variable instead of hardcoding the
function names into the trace log strings. This also corrects a
copy-paste-related typo in the function named rtw_tkip_decrypt23a.
Thanks to Jes Sorensen for the suggestion to use __func__.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:56 +0000 (21:07 -0400)]
staging: rtl8723au: Rework two byte array comparisons
Prior to this commit, rtl8723au's rtw_security.c had two instances of
byte array comparisons (for CRC checks) where the individual elements
of the byte arrays were compared one by one and an error trace would
be output if the byte arrays were determined to be different.
This commit improves the readability of the CRC verification by
placing the individual 4 bytes of each byte array into an 32-bit
unsigned integer and comparing the two resulting integers.
Thanks to Larry Finger for spotting the code style issues in the
previous version of this commit, and thanks to Joe Perches for
suggesting the use of 32-bit integer comparisons instead of byte
array comparisons.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:55 +0000 (21:07 -0400)]
staging: rtl8723au: suspect code indent for conditional statements
Correct a number of indentation-with-spaces-and-tabs issues in
rtl8723au's rtw_security.c, according to checkpatch.pl:
WARNING: suspect code indent for conditional statements
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:53 +0000 (21:07 -0400)]
staging: rtl8723au: No spaces at the start of a line
Prior to this commit, a large block of constants used to represent
an AES S-box table were indented with spaces in rtl8723au's
rtw_security.c. Correct the checkpatch.pl warnings indicating that
spaces should not be used to indent lines:
WARNING: please, no spaces at the start of a line
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:52 +0000 (21:07 -0400)]
staging: rtl8723au: that open brace should be on the previous line
Correct two instances of the checkpatch.pl error indicating that the
opening curly braces should not be on new lines:
ERROR: that open brace { should be on the previous line
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:51 +0000 (21:07 -0400)]
staging: rtl8723au: trailing statements should be on next line
Correct a number of checkpatch.pl errors in rtl8723au's rtw_security.c
related to trailing statements:
ERROR: trailing statements should be on next line
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:50 +0000 (21:07 -0400)]
staging: rtl8723au: Remove unneeded curly braces
Correct a number of checkpatch.pl warnings in rtl8723au's rtw_security.c
related to the existence of unnecessary curly braces around single
statement blocks:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:49 +0000 (21:07 -0400)]
staging: rtl8723au: else is not generally useful after a return
Correct a checkpatch.pl warning regarding rtl8723au's
rtw_security.c::crc32_init pointing out that having an else statement
after a break or a return is not useful.
drivers/staging/rtl8723au/core/rtw_security.c:105:
WARNING: else is not generally useful after a break or return
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:48 +0000 (21:07 -0400)]
staging: rtl8723au: Reorganize a few functions to remove indentation
Prior to this commit, functions rtw_tkip_encrypt23a and rtw_tkip_decrypt23a had
large if blocks which contained the majority of the logic in the functions.
Rework these functions so that if the negated version of the aforementioned if
blocks' conditions are true, we return from the function with _FAIL, as
expected by the calling code.
This lets us remove two levels of indentation from the functions in
question, making them more readable.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:46 +0000 (21:07 -0400)]
staging: rtl8723au: else should follow close brace
Correct checkpatch.pl errors in rtl8723au's rtw_security.c indicating
that an else statement should follow the closing brace of the previous
if/else if code block:
ERROR: else should follow close brace '}'
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 29 Mar 2015 01:07:44 +0000 (21:07 -0400)]
staging: rtl8723au: Reformat whitespace to increase readability
Adjust the whitespace in the signature, local variable declaration and
initialization parts of a number of functions to increase readability
in rtl8723au's rtw_security.c.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 27 Mar 2015 21:01:09 +0000 (16:01 -0500)]
staging: fsl-mc: Changed version matching rules for MC object drivers
Before this change, we were requiring a complete version match (major and
minor version numbers) between MC objects and corresponding drivers, to
allow MC objects to be bound to their drivers. We realized that a mismatch
in minor version numbers should be tolerated, as long as the major version
numbers match. This allows the driver to decide what to do in the minor
version mismatch case. For example, a driver may decide to run with
downgraded functionality if the MC firmware object has older minor version
number than the driver. Also, a driver with older minor version than the
MC firmware object may decide to run even though it cannot use newer
functionality of the MC object.
As part of this change, the dpmng Flib version was also updated
to match the latest MC firmware version.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fsl_mc_allocator driver does not need to be its own module
as it is tightly integrated into the MC bus main driver. It is really
just a sub-component of the MC bus driver. By not making fsl_mc_allocator
its own module, we can have more control of when its initialization happens
and we want it to happen before any driver that depends on the MC bus
driver gets initialized.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 27 Mar 2015 21:01:07 +0000 (16:01 -0500)]
staging: fsl-mc: Fix crash in fsl_mc_device_remove()
Only call fsl_mc_io_destroy() if the DPRC being removed
actually had an mc_io object associated with. Child DPRCs
that have not been bound to the DPRC driver or the VFIO driver
will not have an mc_io associated with them.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 27 Mar 2015 21:01:05 +0000 (16:01 -0500)]
staging: fsl-mc: Removed reordering of MC objects during bus scan
MC objects discovered during an MC bus scan were being reordered
to ensure that all allocatable objects are probed before all
non-allocatable objects. However, this is not necessary, as
drivers of non-allocatable objects, that allocate allocatable
objects in their probe function, can return -EPROBE_DEFER
if such allocations fail.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 27 Mar 2015 21:01:04 +0000 (16:01 -0500)]
staging: fsl-mc: Name MC object devices using decimal numbers
MC object devices were being named using hexadecimaal numbers.
This was not consistent with the object naming conventions used
by MC DPLs and the MC restool.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Fri, 27 Mar 2015 09:56:10 +0000 (15:26 +0530)]
staging: unisys: use error codes
we were just returning -1 to the calling function which was again
returning that if the module failed to load. Now we are returning the
actual error codes.
This patch moves the assignments from the if conditions to the line before the condition.
The 3 occurrence are return values and the checks for errors.
Signed-off-by: Michel von Czettritz <michel.von.czettritz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes whitespace checkpatch.pl warnings and errors.
Mainly whitespaces around operators.
- ERROR: spaces required around that ':' (ctx:VxW)
- ERROR: space required after that ';' (ctx:VxV)
- ERROR: spaces required around that '<' (ctx:VxV)
- ERROR: spaces required around that '!=' (ctx:VxV)
And some small warnings around whitespace:
- ERROR: trailing whitespace
- WARNING: space prohibited before semicolon
- WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: Michel von Czettritz <michel.von.czettritz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log