Afzal Mohammed [Tue, 23 Oct 2012 02:50:35 +0000 (13:50 +1100)]
rtc: omap: kicker mechanism support
OMAP RTC IP can have kicker feature. This prevents spurious writes to
register. To write to registers kicker lock has to be released.
Procedure to do it as follows,
1. write to kick0 register, 0x83e70b13
2. write to kick1 register, 0x95a4f1e0
Writing value other than 0x83e70b13 to kick0 enables write locking, more
details about kicker mechanism can be found in section 20.3.3.5.3 of
AM335X TRM @www.ti.com/am335x
Here id table information is added and is used to distinguish those that
require kicker handling and the ones that doesn't need it. There are more
features in the newer IP's compared to legacy ones other than kicker,
which driver currently doesn't handle, supporting additional features
would be easier with the addition of id table.
Older IP (of OMAP1) doesn't have revision register as per TRM, so revision
register can't be relied always to find features, hence id table is being
used.
While at it, replace __raw_writeb/__raw_readb with writeb/readb; this
driver is used on ARMv7 (AM335X SoC)
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some comment styles in net and drivers/net are flagged inappropriately.
Avoid proclaiming inline comments like:
int a = b; /* some comment */
and block comments like:
/*********************
* some comment
********************/
are defective.
Tested with
$ cat drivers/net/t.c
/* foo */
/*
* foo
*/
/* foo
*/
/* foo
* bar */
/****************************
* some long block comment
***************************/
struct foo {
int bar; /* another test */
};
$
Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function is used by sparc, powerpc tile and arm64 for compat support.
The patch adds a generic implementation with a wrapper for PowerPC to do
the u32->int sign extension.
The reason for a single patch covering powerpc, tile, sparc and arm64 is
to keep it bisectable, otherwise kernel building may fail with mismatched
function declarations.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Tue, 23 Oct 2012 02:50:32 +0000 (13:50 +1100)]
staging: rts_pstor: use kbasename()
The custom filename function mostly repeats the kernel's kbasename. This patch
simplifies it. The updated filename() will not check for the '\' in the
filenames. It seems redundant in Linux. The __FILE__ macro always defined if
we compile an existing file. Thus, NULL check is not needed there as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: YAMANE Toshiaki <yamanetoshi@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Tue, 23 Oct 2012 02:50:31 +0000 (13:50 +1100)]
lib: dynamic_debug: use kbasename()
Remove the custom implementation of the functionality similar to kbasename().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Tue, 23 Oct 2012 02:50:31 +0000 (13:50 +1100)]
string: introduce helper to get base file name from given path
There are several places in the kernel that use functionality like
basename(3) with the exception: in case of '/foo/bar/' we expect to get an
empty string. Let's do it common helper for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jason Baron <jbaron@redhat.com> Cc: YAMANE Toshiaki <yamanetoshi@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mutex for accessing lp855x registers is used in case of the user-space
interaction. When the brightness is changed via sysfs, the mutex is
required. But the backlight class device already provides it. Thus, the
lp855x mutex is unnecessary.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kim, Milo [Tue, 23 Oct 2012 02:50:30 +0000 (13:50 +1100)]
drivers/video/backlight/lp855x_bl.c: use generic PWM functions
The LP855x family devices support the PWM input for the backlight control.
Period of the PWM is configurable in the platform side. Platform
specific functions are unnecessary anymore because generic PWM functions
are used inside the driver.
(PWM input mode)
To set the brightness, new lp855x_pwm_ctrl() is used.
If a PWM device is not allocated, devm_pwm_get() is called.
The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'.
To get the brightness value, no additional handling is required.
Just the value of 'props.brightness' is returned.
If the PWM driver is not ready while initializing the LP855x driver, it's
OK. The PWM device can be retrieved later, when the brightness value is
changed.
Documentation is updated with an example.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 23 Oct 2012 02:50:30 +0000 (13:50 +1100)]
backlight: tosa: use devm_gpio_request_one
By using devm_gpio_request_one it is possible to set the direction and
initial value in one shot. Thus, using devm_gpio_request_one can make the
code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 23 Oct 2012 02:50:29 +0000 (13:50 +1100)]
backlight: lms283gf05: use devm_gpio_request_one
By using devm_gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using devm_gpio_request_one
can make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 23 Oct 2012 02:50:27 +0000 (13:50 +1100)]
backlight: locomolcd: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: line over 80 characters
WARNING: space prohibited between function name and open parenthesis '('
ERROR: trailing statements should be on next line
Also, long comments are fixed for the preferred style and
unnecessary lines are removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 23 Oct 2012 02:50:26 +0000 (13:50 +1100)]
backlight: ili9320: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
WARNING: braces {} are not necessary for single statement blocks
ERROR: code indent should use tabs where possible
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 23 Oct 2012 02:50:26 +0000 (13:50 +1100)]
backlight: hp680_bl: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
ERROR: do not initialise statics to 0 or NULL
ERROR: code indent should use tabs where possible
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 23 Oct 2012 02:50:24 +0000 (13:50 +1100)]
backlight: da903x_bl: use dev_get_drvdata() instead of platform_get_drvdata()
dev_get_drvdata() can be used instead of platform_get_drvdata()
to make the code smaller.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 23 Oct 2012 02:50:19 +0000 (13:50 +1100)]
printk: rename log_<foo> variables and functions
Make these generic names more specific to the printk
subsystem and allow these variables and functions to
become non-static.
Rename log_text to printk_log_text.
Rename log_dict to printk_log_dict.
Rename log_from_idx to printk_log_from_idx.
Rename log_next to printk_log_next.
Rename log_store to printk_log_store.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 23 Oct 2012 02:50:18 +0000 (13:50 +1100)]
printk: rename log_first and log_next variables
Make these generic names more specific to the printk
subsystem and allow these variables to become non-static.
Rename log_first_idx to printk_log_first_idx.
Rename log_first_seq to printk_log_first_seq.
Rename log_next_idx to printk_log_next_idx.
Rename log_next_seq to printk_log_next_seq.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 23 Oct 2012 02:50:17 +0000 (13:50 +1100)]
printk: move braille console support into separate braille.[ch] files
Create files with prototypes and static inlines for braille
support. Make braille_console functions return 1 on success.
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Leach <matthew@mattleach.net>
ERROR: space required after that ',' (ctx:VxV)
#25: FILE: include/linux/init.h:189:
+#define __define_initcall(fn,id) \
^
ERROR: space required after that ',' (ctx:VxV)
#36: FILE: include/linux/init.h:198:
+#define early_initcall(fn) __define_initcall(fn,early)
^
ERROR: space required after that ',' (ctx:VxV)
#45: FILE: include/linux/init.h:207:
+#define pure_initcall(fn) __define_initcall(fn,0)
^
ERROR: space required after that ',' (ctx:VxV)
#62: FILE: include/linux/init.h:209:
+#define core_initcall(fn) __define_initcall(fn,1)
^
ERROR: space required after that ',' (ctx:VxV)
#63: FILE: include/linux/init.h:210:
+#define core_initcall_sync(fn) __define_initcall(fn,1s)
^
ERROR: space required after that ',' (ctx:VxV)
#64: FILE: include/linux/init.h:211:
+#define postcore_initcall(fn) __define_initcall(fn,2)
^
ERROR: space required after that ',' (ctx:VxV)
#65: FILE: include/linux/init.h:212:
+#define postcore_initcall_sync(fn) __define_initcall(fn,2s)
^
ERROR: space required after that ',' (ctx:VxV)
#66: FILE: include/linux/init.h:213:
+#define arch_initcall(fn) __define_initcall(fn,3)
^
ERROR: space required after that ',' (ctx:VxV)
#67: FILE: include/linux/init.h:214:
+#define arch_initcall_sync(fn) __define_initcall(fn,3s)
^
ERROR: space required after that ',' (ctx:VxV)
#68: FILE: include/linux/init.h:215:
+#define subsys_initcall(fn) __define_initcall(fn,4)
^
ERROR: space required after that ',' (ctx:VxV)
#69: FILE: include/linux/init.h:216:
+#define subsys_initcall_sync(fn) __define_initcall(fn,4s)
^
ERROR: space required after that ',' (ctx:VxV)
#70: FILE: include/linux/init.h:217:
+#define fs_initcall(fn) __define_initcall(fn,5)
^
ERROR: space required after that ',' (ctx:VxV)
#71: FILE: include/linux/init.h:218:
+#define fs_initcall_sync(fn) __define_initcall(fn,5s)
^
ERROR: space required after that ',' (ctx:VxV)
#72: FILE: include/linux/init.h:219:
+#define rootfs_initcall(fn) __define_initcall(fn,rootfs)
^
ERROR: space required after that ',' (ctx:VxV)
#73: FILE: include/linux/init.h:220:
+#define device_initcall(fn) __define_initcall(fn,6)
^
ERROR: space required after that ',' (ctx:VxV)
#74: FILE: include/linux/init.h:221:
+#define device_initcall_sync(fn) __define_initcall(fn,6s)
^
ERROR: space required after that ',' (ctx:VxV)
#75: FILE: include/linux/init.h:222:
+#define late_initcall(fn) __define_initcall(fn,7)
^
ERROR: space required after that ',' (ctx:VxV)
#76: FILE: include/linux/init.h:223:
+#define late_initcall_sync(fn) __define_initcall(fn,7s)
^
total: 18 errors, 0 warnings, 58 lines checked
./patches/init-use-the-stringify-operator-for-the-__define_initcall-macro.patch has style problems, please review.
If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Leach <matthew@mattleach.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Leach [Tue, 23 Oct 2012 02:50:16 +0000 (13:50 +1100)]
include/linux/init.h: use the stringify operator for the __define_initcall macro
Currently the __define_initcall macro takes three arguments, fn, id and
level. The level argument is exactly the same as the id argument but
wrapped in quotes. To overcome this need to specify three arguments to
the __define_initcall macro, where one argument is the stringification of
another, we can just use the stringification macro instead.
Signed-off-by: Matthew Leach <matthew@mattleach.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wanpeng Li [Tue, 23 Oct 2012 02:50:15 +0000 (13:50 +1100)]
mm/memblock: reduce overhead in binary search
When checking that the indicated address belongs to the memory region, the
memory regions are checked one by one through a binary search, which will
be time consuming.
If the indicated address isn't in the memory region, then we needn't do
the time-consuming search. Add a check on the indicated address for that
purpose.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shaohua Li [Tue, 23 Oct 2012 02:50:15 +0000 (13:50 +1100)]
swap: add a simple detector for inappropriate swapin readahead
The swapin readahead does a blind readahead whether or not the swapin is
sequential. This is ok for harddisk because large reads have relatively
small costs and if the readahead pages are unneeded they can be reclaimed
easily. But for SSD devices large reads are more expensive than small
one. If readahead pages are unneeded, reading them in caused significant
overhead
This patch addes a simple random read detection similar to file mmap
readahead. If a random read is detected, swapin readahead will be
skipped. This improves a lot for a swap workload with random IO in a fast
SSD.
I run anonymous mmap write micro benchmark, which will triger swapin/swapout.
For both harddisk and SSD, the randwrite swap workload run time is reduced
significantly. Sequential write swap workload hasn't chanage.
Interestingly, the randwrite harddisk test is improved too. This might be
because swapin readahead needs to allocate extra memory, which further
tights memory pressure, so more swapout/swapin.
Signed-off-by: Shaohua Li <shli@fusionio.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Glauber Costa [Tue, 23 Oct 2012 02:50:14 +0000 (13:50 +1100)]
slab: ignore internal flags in cache creation
Some flags are used internally by the allocators for management purposes.
One example of that is the CFLGS_OFF_SLAB flag that slab uses to mark that
the metadata for that cache is stored outside of the slab.
No cache should ever pass those as a creation flags. We can just ignore
this bit if it happens to be passed (such as when duplicating a cache in
the kmem memcg patches).
Because such flags can vary from allocator to allocator, we allow them to
make their own decisions on that, defining SLAB_AVAILABLE_FLAGS with all
flags that are valid at creation time. Allocators that doesn't have any
specific flag requirement should define that to mean all flags.
Common code will mask out all flags not belonging to that set.
Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Tue, 23 Oct 2012 02:50:14 +0000 (13:50 +1100)]
memory-hotplug: allocate zone's pcp before onlining pages
We use __free_page() to put a page to buddy system when onlining pages.
__free_page() will store NR_FREE_PAGES in zone's pcp.vm_stat_diff, so we
should allocate zone's pcp before onlining pages, otherwise we will lose
some free pages.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Lameter <cl@linux.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Tue, 23 Oct 2012 02:50:14 +0000 (13:50 +1100)]
memory-hotplug: fix NR_FREE_PAGES mismatch
NR_FREE_PAGES will be wrong after offlining pages. We add/dec
NR_FREE_PAGES like this now:
1. move all pages in buddy system to MIGRATE_ISOLATE, and dec NR_FREE_PAGES
2. don't add NR_FREE_PAGES when it is freed and the migratetype is
MIGRATE_ISOLATE
3. dec NR_FREE_PAGES when offlining isolated pages.
4. add NR_FREE_PAGES when undoing isolate pages.
When we come to step 3, all pages are in MIGRATE_ISOLATE list, and
NR_FREE_PAGES are right. When we come to step4, all pages are not in
buddy system, so we don't change NR_FREE_PAGES in this step, but we change
NR_FREE_PAGES in step3. So NR_FREE_PAGES is wrong after offlining pages.
So there is no need to change NR_FREE_PAGES in step3.
This patch also fixs a problem in step2: if the migratetype is
MIGRATE_ISOLATE, we should not add NR_FRR_PAGES when we remove pages from
pcppages.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Lameter <cl@linux.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Tue, 23 Oct 2012 02:50:14 +0000 (13:50 +1100)]
memory-hotplug: auto offline page_cgroup when onlining memory block failed
When a memory block is onlined, we will try allocate memory on that node
to store page_cgroup. If onlining the memory block failed, we don't
offline the page cgroup, and we have no chance to offline this page cgroup
unless the memory block is onlined successfully again. It will cause that
we can't hot-remove the memory device on that node, because some memory is
used to store page cgroup. If onlining the memory block is failed, there
is no need to stort page cgroup for this memory. So auto offline
page_cgroup when onlining memory block failed.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Lameter <cl@linux.com> Cc: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Tue, 23 Oct 2012 02:50:13 +0000 (13:50 +1100)]
memory-hotplug: skip HWPoisoned page when offlining pages
hwpoisoned may be set when we offline a page by the sysfs interface
/sys/devices/system/memory/soft_offline_page or
/sys/devices/system/memory/hard_offline_page. If we don't clear
this flag when onlining pages, this page can't be freed, and will
not in free list. So we can't offline these pages again. So we
should skip such page when offlining pages.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Lameter <cl@linux.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bob Liu [Tue, 23 Oct 2012 02:50:12 +0000 (13:50 +1100)]
thp: cleanup: introduce mk_huge_pmd()
Introduce mk_huge_pmd() to simplify the code
Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bob Liu [Tue, 23 Oct 2012 02:50:12 +0000 (13:50 +1100)]
thp: introduce hugepage_vma_check()
Multiple places do the same check.
Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bob Liu [Tue, 23 Oct 2012 02:50:12 +0000 (13:50 +1100)]
thp: introduce hugepage_get_pmd()
Introduce hugepage_get_pmd() to simple code.
Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bob Liu [Tue, 23 Oct 2012 02:50:11 +0000 (13:50 +1100)]
thp: clean up __collapse_huge_page_isolate
There are duplicated places using release_pte_pages().
And release_all_pte_pages() can be removed.
Signed-off-by: Bob Liu <lliubbo@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: use IS_ENABLED(CONFIG_COMPACTION) instead of COMPACTION_BUILD
We don't need custom COMPACTION_BUILD anymore, since we have handy
IS_ENABLED().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memory hotplug: suppress "Device nodeX does not have a release() function" warning
When calling unregister_node(), the function shows following message at
device_release().
"Device 'node2' does not have a release() function, it is broken and must
be fixed."
The reason is node's device struct does not have a release() function.
So the patch registers node_device_release() to the device's release()
function for suppressing the warning message. Additionally, the patch
adds memset() to initialize a node struct into register_node(). Because
the node struct is part of node_devices[] array and it cannot be freed by
node_device_release(). So if system reuses the node struct, it has a
garbage.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memory hotplug: suppress "Device memoryX does not have a release() function" warning
When calling remove_memory_block(), the function shows following message
at device_release().
"Device 'memory528' does not have a release() function, it is broken and
must be fixed."
The reason is memory_block's device struct does not have a release()
function.
So the patch registers memory_block_release() to the device's release()
function for suppressing the warning message. Additionally, the patch
moves kfree(mem) into the release function since the release function is
prepared as a means to free a memory_block struct.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Namjae Jeon [Tue, 23 Oct 2012 02:50:09 +0000 (13:50 +1100)]
writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr()
There is no reason to pass the nr_pages_dirtied argument, because
nr_pages_dirtied value from the caller is unused in
balance_dirty_pages_ratelimited_nr().
Gavin Shan [Tue, 23 Oct 2012 02:50:09 +0000 (13:50 +1100)]
mm/page_alloc.c: remove duplicate check
While allocating pages using buddy allocator, the compound page is
probably split up to free pages. Under these circumstances, the compound
page should be destroyed by destroy_compound_page(). However, there is a
duplicate check to judge if the page is compound.
Remove the duplicate check since the compound_order() returns 0 when the
page doesn't have PG_head set in destroy_compound_page(). That is to say,
destroy_compound_page() needn't check PageHead().
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhao Hongjiang [Tue, 23 Oct 2012 02:50:08 +0000 (13:50 +1100)]
fs: change return values from -EACCES to -EPERM
According to SUSv3:
[EACCES] Permission denied. An attempt was made to access a file in a way
forbidden by its file access permissions.
[EPERM] Operation not permitted. An attempt was made to perform an operation
limited to processes with appropriate privileges or to the owner of a file
or other resource.
So -EPERM should be returned if capability checks fails.
Strictly speaking this is an API change since the error code user sees is
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ian Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry Kasatkin [Tue, 23 Oct 2012 02:50:08 +0000 (13:50 +1100)]
vfs: increment iversion when a file is truncated
When a file is truncated with truncate()/ftruncate() and then closed,
iversion is not updated. This patch uses ATTR_SIZE flag as an indication
to increment iversion.
Mimi said:
On fput(), i_version is used to detect and flag files that have changed
and need to be re-measured in the IMA measurement policy. When a file
is truncated with truncate()/ftruncate() and then closed, i_version is
not updated. As a result, although the file has changed, it will not be
re-measured and added to the IMA measurement list on subsequent access.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Tue, 23 Oct 2012 02:50:08 +0000 (13:50 +1100)]
drbd: use copy_highpage
Use copy_highpage() to copy from one page to another.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stephen Warren [Tue, 23 Oct 2012 02:50:07 +0000 (13:50 +1100)]
block: partition: msdos: provide UUIDs for partitions
The MSDOS/MBR partition table includes a 32-bit unique ID, often referred
to as the NT disk signature. When combined with a partition number within
the table, this can form a unique ID similar in concept to EFI/GPT's
partition UUID. Constructing and recording this value in struct
partition_meta_info allows MSDOS partitions to be referred to on the
kernel command-line using the following syntax:
Stephen Warren [Tue, 23 Oct 2012 02:50:07 +0000 (13:50 +1100)]
init: reduce PARTUUID min length to 1 from 36
Reduce the minimum length for a root=PARTUUID= parameter to be considered
valid from 36 to 1. EFI/GPT partition UUIDs are always exactly 36
characters long, hence the previous limit. However, the next patch will
support DOS/MBR UUIDs too, which have a different, shorter, format.
Instead of validating any particular length, just ensure that at least
some non-empty value was given by the user.
Also, consider a missing UUID value to be a parsing error, in the same
vein as if /PARTNROFF exists and can't be parsed. As such, make both
error cases print a message and disable rootwait. Convert to pr_err while
we're at it.
Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Cc: Will Drewry <wad@chromium.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stephen Warren [Tue, 23 Oct 2012 02:50:07 +0000 (13:50 +1100)]
block: store partition_meta_info.uuid as a string
This will allow other types of UUID to be stored here, aside from true
UUIDs. This also simplifies code that uses this field, since it's usually
constructed from a, used as a, or compared to other, strings.
Note: A simplistic approach here would be to set uuid_str[36]=0 whenever a
/PARTNROFF option was found to be present. However, this modifies the
input string, and causes subsequent calls to devt_from_partuuid() not to
see the /PARTNROFF option, which causes different results. In order to
avoid misleading future maintainers, this parameter is marked const.
Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Cc: Will Drewry <wad@chromium.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Tue, 23 Oct 2012 02:50:06 +0000 (13:50 +1100)]
cciss: use check_signature()
Use check_signature() to find a signature in the mmio address.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Tue, 23 Oct 2012 02:50:06 +0000 (13:50 +1100)]
cciss: cleanup bitops usage
- Remove unnecessary correction of bit and address
- Use BITS_TO_LONGS macro to calculate bitmap size
- Use bitmap_zero()
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The block control group, infiniband, xfs, crypto, 802.11, netfilter.
Nothing quite so fundamental as fs/namespace.c but definitely in
multiplatform-code that should work, and is already broken on those
architecutres.
Looking at the implementation of atomic64_add_return in lib/atomic64.c the
code looks as efficient as these kinds of things get.
Which leads me to the conclusion that we need atomic64 support on all
architectures.
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
How is the compiler even handling exported functions that are marked
inline? Anyway, these shouldn't be inline because of that, so remove that
marking.
Based on a larger patch by Mark Charlebois to get LLVM to build the
kernel.
Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Charlebois <mcharleb@qualcomm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: hank <pyu@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The use of defined() on arrays and hashes has been deprecated since perl
5.6, but until 5.17.6 it only warned on lexicals, not package globals.
Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jean Delvare [Tue, 23 Oct 2012 02:50:05 +0000 (13:50 +1100)]
drm/i915: optimize DIV_ROUND_CLOSEST() call
DIV_ROUND_CLOSEST is faster if the compiler knows it will only be dealing
with unsigned dividends.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pcmcia: move unbind/rebind into dev_pm_ops.complete
Move the device rebind procedures for cardbus devices from the pm.resume
into the pm.complete callback.
The reason for moving the code is: "[...] The PM code needs to send
suspend and resume messages to every device in the right order, and it
can't do that if new devices are being added at the same time. [...]"
However the situation really isn't quite that rigid. In particular,
adding new children during a resume callback shouldn't cause much of
problem because the children don't need to be resumed anyway (since they
were never suspended). On the other hand, if you do it you will get a
dev_warn() from the PM core, something like 'parent should not be
sleeping'.
Still, it is considered bad form and should be avoided if possible."
(Alan Stern's full comment about the topic can
be found here: <https://lkml.org/lkml/2012/7/10/254>)
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Randy Dunlap [Tue, 23 Oct 2012 02:50:04 +0000 (13:50 +1100)]
olpc: fix olpc-xo1-sci.c build errors
Fix build errors when CONFIG_INPUT=m. This is not pretty, but all of the
OLPC kconfig options are bool instead of tristate.
arch/x86/built-in.o: In function `send_lid_state':
olpc-xo1-sci.c:(.text+0x1d323): undefined reference to `input_event'
olpc-xo1-sci.c:(.text+0x1d338): undefined reference to `input_event'
arch/x86/built-in.o: In function `free_ebook_switch':
olpc-xo1-sci.c:(.text+0x1d529): undefined reference to `input_unregister_device'
olpc-xo1-sci.c:(.text+0x1d533): undefined reference to `input_free_device'
arch/x86/built-in.o: In function `free_power_button':
olpc-xo1-sci.c:(.text+0x1d549): undefined reference to `input_unregister_device'
olpc-xo1-sci.c:(.text+0x1d553): undefined reference to `input_free_device'
arch/x86/built-in.o: In function `send_ebook_state':
olpc-xo1-sci.c:(.text+0x1d632): undefined reference to `input_event'
olpc-xo1-sci.c:(.text+0x1d647): undefined reference to `input_event'
arch/x86/built-in.o: In function `xo1_sci_intr':
olpc-xo1-sci.c:(.text+0x1d78e): undefined reference to `input_event'
olpc-xo1-sci.c:(.text+0x1d7a3): undefined reference to `input_event'
olpc-xo1-sci.c:(.text+0x1d7be): undefined reference to `input_event'
arch/x86/built-in.o:olpc-xo1-sci.c:(.text+0x1d7d3): more undefined references to `input_event' follow
arch/x86/built-in.o: In function `free_lid_switch':
olpc-xo1-sci.c:(.text+0x1d7fd): undefined reference to `input_unregister_device'
olpc-xo1-sci.c:(.text+0x1d807): undefined reference to `input_free_device'
arch/x86/built-in.o: In function `setup_lid_switch':
olpc-xo1-sci.c:(.devinit.text+0x155): undefined reference to `input_allocate_device'
olpc-xo1-sci.c:(.devinit.text+0x1a4): undefined reference to `input_register_device'
olpc-xo1-sci.c:(.devinit.text+0x1ce): undefined reference to `input_unregister_device'
olpc-xo1-sci.c:(.devinit.text+0x1d8): undefined reference to `input_free_device'
arch/x86/built-in.o: In function `xo1_sci_probe':
olpc-xo1-sci.c:(.devinit.text+0x235): undefined reference to `input_allocate_device'
olpc-xo1-sci.c:(.devinit.text+0x285): undefined reference to `input_register_device'
olpc-xo1-sci.c:(.devinit.text+0x299): undefined reference to `input_free_device'
olpc-xo1-sci.c:(.devinit.text+0x2e1): undefined reference to `input_register_device'
olpc-xo1-sci.c:(.devinit.text+0x2f5): undefined reference to `input_free_device'
olpc-xo1-sci.c:(.devinit.text+0x54c): undefined reference to `input_allocate_device'
In the long run, fixing this driver kconfig to be tristate instead of bool
would be a very good change.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Andres Salomon <dilinger@queued.net> Cc: Chris Ball <cjb@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Daniel Drake <dsd@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Shi [Tue, 23 Oct 2012 02:50:04 +0000 (13:50 +1100)]
arch/x86/platform/uv: fix incorrect tlb flush all issue
The flush tlb optimization code has logical issue on UV platform. It
doesn't flush the full range at all, since it simply ignores its 'end'
parameter (and hence also the "all" indicator) in uv_flush_tlb_others()
function.
Cliff's notes:
: I tested the patch on a UV. It has the effect of either clearing 1 or all
: TLBs in a cpu. I added some debugging to test for the cases when clearing
: all TLBs is overkill, and in practice it happens very seldom.
Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Cliff Wickman <cpw@sgi.com> Tested-by: Cliff Wickman <cpw@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log