The LRADC virtual channels have an 18 bit field to store the sum of up
to 2^5 accumulated samples. The read_raw function however only operates
over a single sample (12 bit resolution).
In order to use this field for scaling operations, we need it to be the
exact resolution value of the LRADC.
Besides, the driver was using an 18 bit mask (LRADC_CH_VALUE_MASK) to
report touch coordinates to userland. A 12 bit mask should be used instead
or else the touch libraries will expect a coordinates range between 0
and 0x3ffff (18 bits), instead of between 0 and 0xfff (12 bits).
Signed-off-by: Hector Palacios <hector.palacios@digi.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Thu, 8 Aug 2013 16:39:00 +0000 (17:39 +0100)]
iio: Add tmp006 IR temperature sensor
the TI TMP006 is a non-contact temperature sensor with I2C interface;
it measures the surface temperature of a distance object using a
thermopile to absorb IR energy emitted from the object
the sensor has two channels: IR sensor voltage (16-bit) and reference
temperature of the chip (14-bit); datasheet is here:
http://www.ti.com/lit/ds/symlink/tmp006.pdf
v2 (thanks to Grygorii Strashko, Lars-Peter Clausen, Jonathan Cameron
for review comments):
* power down device on driver remove
* use sign_extend32()
* style cleanup
* add comments what channel raw LSBs mean
* spelling of thermopile
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: LM Sensors <lm-sensors@lm-sensors.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Yann Droneaud [Thu, 15 Aug 2013 13:10:54 +0000 (15:10 +0200)]
android/sync: use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()
Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().
Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.
In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.
This patch replaces calls to get_unused_fd() with call to
get_unused_fd_flags(O_CLOEXEC) following advice from Erik Gilling.
Yann Droneaud [Thu, 15 Aug 2013 13:10:53 +0000 (15:10 +0200)]
android/sw_sync: use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()
Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().
Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.
In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.
This patch replaces calls to get_unused_fd() with call to
get_unused_fd_flags(O_CLOEXEC) following advice from Erik Gilling.
Jens Frederich [Thu, 15 Aug 2013 19:34:55 +0000 (21:34 +0200)]
Staging: olpc_dcon: replace some magic numbers
This patch replace some magic numbers. I believe it makes
the driver more readable.
The magic number 0x26 is the XO system embedded controller
(EC) command 'DCON power enable/disable'.
Number 0x41, and 0x42 are special memory controller settings
register. The 0x41 initialize bit sequence 0x101 means:
enable memory power down function and special SDRAM clock
delay for synchronize SDRAM output and clock signal.
The 0x42 initialize squence 0x101 is wrong. According to
the specification Bit 8 is reserved, thus not in use.
I removed it.
Lidza Louina [Thu, 15 Aug 2013 14:28:22 +0000 (10:28 -0400)]
staging: dgnc: removes proc code
This patch removes the dgnc_proc.c and dgnc_proc.h files and all
references to proc functions in dgnc_driver.c. This also removes proc.h
from the include headers in driver.c, mgmt.c and sysfs.c and proc.o
from the Makefile.
drivers/staging/comedi/drivers/das16.c: In function 'das16_detach':
drivers/staging/comedi/drivers/das16.c:1234: error: implicit declaration of function 'kfree'
Cc: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 13 Aug 2013 17:29:26 +0000 (18:29 +0100)]
staging: ozwpan: Separate success & failure case for oz_hcd_pd_arrived()
This patch separates success & failure block along with fixing
following issues:-
1. The way oz_hcd_pd_arrived() looks now it's easy to think we free "ep" but
actually we do this spaghetti thing of setting it to NULL on success.
2. It is hard to read it because there are unlocks scattered throughout.
3. Currently we set "ep" to NULL on the success path and then test it and or
free it. In current code you have to scroll to the start of the function
to read code.
Original patch was submitted by Dan here :-
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2013-August/040113.html
Lidza Louina [Tue, 13 Aug 2013 19:49:58 +0000 (15:49 -0400)]
staging: dgnc: removes read_cnt, real_raw, rawreadok and buf
This patch removes the use of read_cnt, real_raw, buf and rawreadok. The
variable buf is never used in the code. The variables rawreadok read_cnt
and real_raw don't exist in the new API. Reading the data raw is no
longer supported by the tty layer.
Lidza Louina [Tue, 13 Aug 2013 19:49:57 +0000 (15:49 -0400)]
staging: dgnc: fixes ioctl param list
The declaration for the ioctl function has changed. The previous version
of this declaration took struct file *file as a parameter and the new
one does not. This patch removes that parameter.
Lidza Louina [Tue, 13 Aug 2013 19:49:54 +0000 (15:49 -0400)]
staging: dgnc: fixes tty_port and tty_struct params
The functions tty_flip_buffer_push, tty_insert_flip_string,
tty_insert_flip_char and tty_buffer_request_room now require a struct of
type tty_port instead of struct tty_struct. This patch makes those
changes.
staging: vt6656: rxtx.c s_uFillDataHead remove dead variables.
As result of patches
staging: vt6656: rxtx.c: s_uGetDataDuration remove First Frag or Mid Frag dead code
staging: vt6656: rxtx.c: s_uGetDataDuration remove dead variables.
variables uFragIdx, cbLastFragmentSize, uMACfragNum are dead.
Minchan Kim [Mon, 12 Aug 2013 06:13:56 +0000 (15:13 +0900)]
zram: don't grab mutex in zram_slot_free_noity
[1] introduced down_write in zram_slot_free_notify to prevent race
between zram_slot_free_notify and zram_bvec_[read|write]. The race
could happen if somebody who has right permission to open swap device
is reading swap device while it is used by swap in parallel.
However, zram_slot_free_notify is called with holding spin_lock of
swap layer so we shouldn't avoid holing mutex. Otherwise, lockdep
warns it.
This patch adds new list to handle free slot and workqueue
so zram_slot_free_notify just registers slot index to be freed and
registers the request to workqueue. If workqueue is expired,
it holds mutex_lock so there is no problem any more.
If any I/O is issued, zram handles pending slot-free request
caused by zram_slot_free_notify right before handling issued
request because workqueue wouldn't be expired yet so zram I/O
request handling function can miss it.
Lastly, when zram is reset, flush_work could handle all of pending
free request so we shouldn't have memory leak.
NOTE: If zram_slot_free_notify's kmalloc with GFP_ATOMIC would be
failed, the slot will be freed when next write I/O write the slot.
[1] [57ab0485, zram: use zram->lock to protect zram_free_page()
in swap free notify path]
* from v2
* refactoring
* from v1
* totally redesign
Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minchan Kim [Mon, 12 Aug 2013 06:13:55 +0000 (15:13 +0900)]
zram: fix invalid memory access
[1] tried to fix invalid memory access on zram->disk but it didn't
fix properly because get_disk failed during module exit path.
Actually, we don't need to reset zram->disk's capacity to zero
in module exit path so that this patch introduces new argument
"reset_capacity" on zram_reset_divice and it only reset it when
reset_store is called.
[1] 6030ea9b, zram: avoid invalid memory access in zram_exit()
Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Zimmerman [Sun, 11 Aug 2013 19:50:17 +0000 (12:50 -0700)]
staging: dwc2: reorder some kernel doc comments and struct members
Reorder the kernel doc comments for 'struct dwc2_core_params' to
match the ordering in the struct itself. Reorder the members of
'struct dwc2_qh' (and its kerneldoc comments) to minimize the
amount of structure padding.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the unneeded SBE_INCLUDE_SYMBOLS #define, and the associated STATIC
#define, and replaced all occurances of STATIC with 'static'. This was in
response to sparse warnings of the form "symbol 'XYZ' was not declared. Should
it be static?".
Removed a function prototype (musycc_init_port) as adding the 'static'
declaration produced a new gcc warning. (musycc_init_port is only declared if
SBE_WAN256T3_ENABLE is set)
DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the DIO channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a DIO channel.
Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same paramters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped DIO channels.
This function returns:
0 if the instruction was successful but requires additional handling by
the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}
insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)
-EINVAL for all unhandled instructions
The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: drivers: use comedi_dio_insn_config() for complex cases
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zcache is obsolete and not used anymore, Bob Liu has rewritten it and is
submitting it for inclusion through the main -mm tree, as it should have
been done in the first place...
Cc: Bob Liu <lliubbo@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: drivers: use comedi_dio_insn_config() for complex cases
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the dio channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a dio channel.
Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same parameters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped dio channels.
This function returns:
0 if the instruction was successful but requires additional handling by
the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}
insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)
-EINVAL for all unhandled instructions
The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rupesh Gujare [Mon, 5 Aug 2013 11:28:33 +0000 (12:28 +0100)]
staging: ozwpan: Fix farewell report.
This patch fix following issues reported by Dan:-
1) There is no check limiting the size to 32 and it could be up to
253 bytes.
2) Use defines instead of magic numbers.
3) The oz_farewell struct is supposed to be a variable length struct
but the variable part is put in the middle. It doesn't make any
sense to put the length of the variable size array after then end
of the array because we can never find it again! Put the
variable size array at the end. Make it a zero length array.
u8 len;
u8 report[0];
4) In oz_add_farewell() we do this:
f = kmalloc(sizeof(struct oz_farewell) + len - 1, GFP_ATOMIC);
The "- 1" refers to sizeof(f->report) but because it was a magic
number then it was missed when the sizeof(f->report) changed.
5) In [patch 6/6] we set the ->len member. But because it is at the
end of a variable length array with no limit check the remote
attacker can just rewrite it using the memcpy() on the next line.
Rupesh Gujare [Mon, 5 Aug 2013 11:14:04 +0000 (12:14 +0100)]
staging: ozwpan: Fix build warning.
This patch fixes following build warning.
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30aadd): undefined reference to `__divdi3'
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30ac85): undefined reference to `__divdi3'
Linus Torvalds [Sun, 11 Aug 2013 23:32:26 +0000 (16:32 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is three bug fixes: An fnic warning caused by sleeping under a
lock, a major regression with our updated WRITE SAME/UNMAP logic which
caused tons of USB devices (and one RAID card) to cease to function
and a megaraid_sas firmware initialisation problem which causes kdump
failures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
[SCSI] fnic: BUG: sleeping function called from invalid context during probe
[SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel
Linus Torvalds [Sun, 11 Aug 2013 19:12:39 +0000 (12:12 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"This includes small series from Michael Neuling to fix a couple of
nasty remaining problems with the new Power8 support, also targeted at
stable 3.10, without which some new userspace accessible registers
aren't properly context switched, and in some case, can be clobbered
by the user of transactional memory.
Along with that, a few slightly more minor things, such as a missing
Kconfig option to enable handling of denorm exceptions when not
running under a hypervisor (or userspace will randomly crash when
hitting denorms with the vector unit), some nasty bugs in the new
pstore oops code, and other simple bug fixes worth having in now.
Note: I picked up the two powerpc KVM fixes as Alex Graf asked me to
handle KVM bits while he is on vacation. However I'll let him decide
whether they should go to -stable or not when he is back"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs
powerpc: Save the TAR register earlier
powerpc: Fix context switch DSCR on POWER8
powerpc: Rework setting up H/FSCR bit definitions
powerpc: Fix hypervisor facility unavaliable vector number
powerpc/kvm/book3s_pr: Return appropriate error when allocation fails
powerpc/kvm: Add signed type cast for comparation
powerpc/eeh: Add missing procfs entry for PowerNV
powerpc/pseries: Add backward compatibilty to read old kernel oops-log
powerpc/pseries: Fix buffer overflow when reading from pstore
powerpc: On POWERNV enable PPC_DENORMALISATION by default
Linus Torvalds [Sun, 11 Aug 2013 19:11:33 +0000 (12:11 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull s390 kvm fixes from Paolo Bonzini:
"Two fixes for s390"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: fix pfmf non-quiescing control handling
KVM: s390: move kvm_guest_enter,exit closer to sie
Linus Torvalds [Sun, 11 Aug 2013 19:10:47 +0000 (12:10 -0700)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mv64xxx: Document the newly introduced allwinner compatible
i2c: Fix Kontron PLD prescaler calculation
i2c: i2c-mxs: Use DMA mode even for small transfers
Linus Torvalds [Sat, 10 Aug 2013 22:21:47 +0000 (15:21 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"These are assorted fixes, mostly from Josef nailing down xfstests
runs. Zach also has a long standing fix for problems with readdir
wrapping f_pos (or ctx->pos)
These patches were spread out over different bases, so I rebased
things on top of rc4 and retested overnight"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: don't loop on large offsets in readdir
Btrfs: check to see if root_list is empty before adding it to dead roots
Btrfs: release both paths before logging dir/changed extents
Btrfs: allow splitting of hole em's when dropping extent cache
Btrfs: make sure the backref walker catches all refs to our extent
Btrfs: fix backref walking when we hit a compressed extent
Btrfs: do not offset physical if we're compressed
Btrfs: fix extent buffer leak after backref walking
Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents
btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified
Linus Torvalds [Sat, 10 Aug 2013 22:20:37 +0000 (15:20 -0700)]
Merge tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Stable patch for lockd to fix Oopses due to inappropriate calls to
utsname()->nodename
- Stable patches for sunrpc to fix Oopses on shutdown when using
AF_LOCAL sockets with rpcbind
- Fix memory leak and error checking issues in nfs4_proc_lookup_mountpoint
- Fix a regression with the sync mount option failing to work for nfs4
mounts
- Fix a writeback performance issue when doing cache invalidation
- Remove an incorrect call to nfs_setsecurity in nfs_fhget
* tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix up nfs4_proc_lookup_mountpoint
NFS: Remove unnecessary call to nfs_setsecurity in nfs_fhget()
NFSv4: Fix the sync mount option for nfs4 mounts
NFS: Fix writeback performance issue on cache invalidation
SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister
SUNRPC: Don't auto-disconnect from the local rpcbind socket
LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs
Linus Torvalds [Sat, 10 Aug 2013 22:19:58 +0000 (15:19 -0700)]
Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Some fixes for a 4.1 feature that in retrospect probably should have
waited for 3.12.... But it appears to be working now"
* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix SP4_MACH_CRED negotiation in EXCHANGE_ID
nfsd4: Fix MACH_CRED NULL dereference
Linus Torvalds [Sat, 10 Aug 2013 20:00:56 +0000 (13:00 -0700)]
Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A couple of USB-audio fixes that should also go to stable kernels"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: do not trust too-big wMaxPacketSize values
ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
Linus Torvalds [Sat, 10 Aug 2013 16:00:51 +0000 (09:00 -0700)]
Merge tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing
huge, two IIO driver fixes, and a zcache fix. All of these have been
in linux-next for a while"
* tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: zcache: fix "zcache=" kernel parameter
iio: ti_am335x_adc: Fix wrong samples received on 1st read
iio:trigger: Fix use_count race condition
Linus Torvalds [Sat, 10 Aug 2013 16:00:21 +0000 (09:00 -0700)]
Merge tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 3 small USB fixes for 3.11-rc5.
One is a fix that the ChromeOS developers ran into on some Intel
hardware, one is a build fix, and the last is a MAINTAINERS update to
help people figure out where to send USB network driver patches.
All of these have been in linux-next for a while"
* tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
MAINTAINERS: Add separate section for USB NETWORKING DRIVERS
usb: xhci: add missing dma-mapping.h includes
usb: core: don't try to reset_device() a port that got just disconnected
Zach Brown [Thu, 11 Jul 2013 23:19:42 +0000 (16:19 -0700)]
btrfs: don't loop on large offsets in readdir
When btrfs readdir() hits the last entry it sets the readdir offset to a
huge value to stop buggy apps from breaking when the same name is
returned by readdir() with concurrent rename()s.
But unconditionally setting the offset to INT_MAX causes readdir() to
loop returning any entries with offsets past INT_MAX. It only takes a
few hours of constant file creation and removal to create entries past
INT_MAX.
So let's set the huge offset to LLONG_MAX if the last entry has already
overflowed 32bit loff_t. Without large offsets behaviour is identical.
With large offsets 64bit apps will work and 32bit apps will be no more
broken than they currently are if they see large offsets.
Signed-off-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Thu, 25 Jul 2013 19:11:47 +0000 (15:11 -0400)]
Btrfs: check to see if root_list is empty before adding it to dead roots
A user reported a panic when running with autodefrag and deleting snapshots.
This is because we could end up trying to add the root to the dead roots list
twice. To fix this check to see if we are empty before adding ourselves to the
dead roots list. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Mon, 22 Jul 2013 16:54:30 +0000 (12:54 -0400)]
Btrfs: release both paths before logging dir/changed extents
The ceph guys tripped over this bug where we were still holding onto the
original path that we used to copy the inode with when logging. This is based
on Chris's fix which was reported to fix the problem. We need to drop the paths
in two cases anyway so just move the drop up so that we don't have duplicate
code. Thanks,
Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Thu, 11 Jul 2013 14:34:59 +0000 (10:34 -0400)]
Btrfs: allow splitting of hole em's when dropping extent cache
I noticed while running multi-threaded fsync tests that sometimes fsck would
complain about an improper gap. This happens because we fail to add a hole
extent to the file, which was happening when we'd split a hole EM because
btrfs_drop_extent_cache was just discarding the whole em instead of splitting
it. So this patch fixes this by allowing us to split a hole em properly, which
means that added holes actually get logged properly and we no longer see this
fsck error. Thankfully we're tolerant of these sort of problems so a user would
not see any adverse effects of this bug, other than fsck complaining. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 5 Jul 2013 18:03:47 +0000 (14:03 -0400)]
Btrfs: make sure the backref walker catches all refs to our extent
Because we don't mess with the offset into the extent for compressed we will
properly find both extents for this case
[extent a][extent b][rest of extent a]
but because we already added a ref for the front half we won't add the inode
information for the second half. This causes us to leak that memory and not
print out the other offset when we do logical-resolve. So fix this by calling
ulist_add_merge and then add our eie to the existing entry if there is one.
With this patch we get both offsets out of logical-resolve. With this and the
other 2 patches I've sent we now pass btrfs/276 on my vm with compress-force=lzo
set. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
projects / linux-beck.git / log