David Brownell [Thu, 7 Aug 2008 01:49:57 +0000 (18:49 -0700)]
usb gadget: issue notifications from ACM function
Update the CDC-ACM gadget code to support the peripheral-to-host
notifications when the tty is opened or closed, or issues a BREAK.
The serial framework code calls new generic hooks; right now only
CDC-ACM uses those hooks. This resolves several REVISIT comments
in the code. (Based on a patch from Felipe Balbi.)
Note that this doesn't expose USB_CDC_CAP_BRK to the host, since
this code still rejects USB_CDC_REQ_SEND_BREAK control requests
for host-to-peripheral BREAK signaling (received via /dev/ttyGS*).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 7 Aug 2008 17:02:40 +0000 (13:02 -0400)]
usb-storage: unusual_devs entry for Nokia 5300
This patch (as1120) adds an unusual_devs entry for the Nokia 5300.
Maybe once Nokia releases the Symbian code we'll be able to fix all
the problems it has with the USB mass-storage protocol.
CC [M] drivers/usb/class/cdc-acm.o
drivers/usb/class/cdc-acm.c: In function 'acm_waker':
drivers/usb/class/cdc-acm.c:527: warning: comparison of distinct pointer types lacks a cast
drivers/usb/class/cdc-acm.c:529: warning: comparison of distinct pointer types lacks a cast
Lex Ross [Wed, 6 Aug 2008 12:25:08 +0000 (16:25 +0400)]
USB: ftdi_sio: add support for PHI Fisco data cable (FT232BM based, VID/PID 0403:e40b)
Support for PHI Fisco USB to Serial data cable (FTDI FT232BM based).
PHI Fisco cable is supplied for connecting Philips Xenium 9@9++ mobile phones.
PIDs were missing.
Tested successfully with PHI Fisco Data Cable (VID/PID 0403:e40b)
Signed-off-by: Lex V. Ross <lross@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
According to Alan Stern, short packets are quite normal under
certain circumstances. This printk was triggered by usb to
serial converters on every packet and some usb sticks triggered
a few of those while plugging the stick.
This printks are now hidden unless USB debug mode is activated.
Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ISP1760 requires a delay of 90ns between programming the address and
reading the data. Current driver solves this by a mdelay(1) which is
very heavy weighted and slow. This patch applies the workaround from
the ISP1760 FAQ by using two different banks for PTD and payload data
and using a common wait for them. This wait is done by an additional
ISP1760 access (whose timing constraints guarantee the 90ns delay).
This improves speed when reading from an USB stick from:
$ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638
real 1m 15.43s
user 0m 0.44s
sys 0m 39.46s
to
$ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638
real 0m 18.53s
user 0m 0.16s
sys 0m 12.97s
[bigeasy@linutronix.de: fixed comment formating, moved define into
header file, obey 80 char rule]
usb: return error code instead of 0 in the enqueue function.
if the enqueue function returns -ESHUTDOWN or -ENOMEM then
we return 0 instead of an error. This leads to a timeout and
then to a dequeue request of an not enqueued urb.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Mon, 7 Jul 2008 19:16:08 +0000 (12:16 -0700)]
USB: serial gadget: rx path data loss fixes
Update RX path handling in new serial gadget code to cope better with
RX blockage: queue every RX packet until its contents can safely be
passed up to the ldisc. Most of the RX path work is now done in the
RX tasklet, instead of just the final "push to ldisc" step. This
addresses some cases of data loss:
- A longstanding serial gadget bug: when tty_insert_flip_string()
didn't copy the entire buffer, the rest of the characters were
dropped! Now that packet stays queued until the rest of its data
is pushed to the ldisc.
- Another longstanding issue: in the unlikely case that an RX
transfer returns data and also reports a fault, that data is
no longer discarded.
- In the recently added RX throttling logic: it needs to stop
pushing data into the TTY layer, instead of just not submitting
new USB read requests. When the TTY is throttled long enough,
backpressure will eventually make the OUT endpoint NAK.
Also: an #ifdef is removed (no longer necessary); and start switching
to a better convention for debug messages (prefix them with tty name).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin Lloyd [Thu, 10 Jul 2008 21:14:57 +0000 (14:14 -0700)]
USB Storage Sierra: TRU-Install feature update
This patch upgrades the support for the Sierra Wireless TRU-Install
feature (i.e. zeroCD) to allow for future support of Linux enabled
TRU-Install devices.
By default all devices that do not have a Linux enabled TRU-Install
device (i.e. the device does not have a Linux package on the virtual CD
partition) will be switched into "modem mode." Devices that do contain a
Linux package in the TRU-Install virtual CD will be allowed to enumerate
as a CD-Rom so that either (a) a user can install the packaged software
or (b) a user-space application (e.g. udev) can switch it to modem mode.
This patch does allow for manual override by adding a usb-storage module
parameter 'swi_tru_install' which can force the modem into either mode
regardless of what packages it contains.
Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin Lloyd [Thu, 10 Jul 2008 21:14:51 +0000 (14:14 -0700)]
USB Serial Sierra: Dynamic interface detection
This patch changes the method by which the number of ports per interface is
assigned so that it is more dynamic and calculated on the fly (as opposed to
hard coding it). This will allow for faster and easier addition of products.
Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 21 Jul 2008 14:08:28 +0000 (10:08 -0400)]
usb-storage: unusual_devs entries for iRiver T10 and Datafab CF+SM reader
This patch (as1115) adds unusual_devs entries with the IGNORE_RESIDE
flag for the iRiver T10 and the Simple Tech/Datafab CF+SM card
reader. Apparently these devices provide reasonable residue values
for READ and WRITE operations, but not for others like INQUIRY or READ
CAPACITY.
This fixes the iRiver T10 problem reported in Bugzilla #11125.
Simon Arlott [Mon, 21 Jul 2008 19:44:50 +0000 (20:44 +0100)]
USB: Move usb/mon/ up to misc options in Kconfig
This makes "USB Monitor" appear under "Miscellaneous USB options"
section instead of in the middle of device specific drivers in the
"USB Imaging devices" section.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 29 Jul 2008 15:58:06 +0000 (11:58 -0400)]
usb-storage: automatically recognize bad residues
This patch (as1119) will help to reduce the clutter of usb-storage's
unusual_devs file by automatically detecting some devices that need
the IGNORE_RESIDUE flag. The idea is that devices should never return
a non-zero residue for an INQUIRY or a READ CAPACITY command unless
they failed to transfer all the requested data. So if one of these
commands transfers a standard amount of data but there is a positive
residue, we know that the residue is bogus and we can set the flag.
This fixes the problems reported in Bugzilla #11125.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Wed, 30 Jul 2008 15:31:50 +0000 (11:31 -0400)]
USB: fix interface unregistration logic
This patch (as1122) fixes a bug: When an interface is unregistered,
its children (sysfs files and endpoint devices) are unregistered after
it instead of before.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Kay Sievers <kay.sievers@vrfy.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 29 Jul 2008 16:01:04 +0000 (12:01 -0400)]
usb-serial: don't release unregistered minors
This patch (as1121) fixes a bug in the USB serial core. When a device
is unregistered, the core will give back its minors -- even if the
device hasn't been assigned any!
The patch reserves the highest minor value (255) to mean that no minor
was assigned. It also removes some dead code and does a small style
fixup.
Dave Jones [Mon, 14 Jul 2008 17:28:34 +0000 (13:28 -0400)]
USB: usb-storage: quirk around v1.11 firmware on Nikon D4
usb-storage: quirk around v1.11 firmware on Nikon D40
https://bugzilla.redhat.com/show_bug.cgi?id=454028
Just as in earlier firmware versions, we need to perform this
quirk for the latest version too.
Speculatively do the entry for the D80 too, as they seem to
have the same firmware problems historically.
Signed-off-by: Dave Jones <davej@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 21 Jul 2008 13:56:26 +0000 (09:56 -0400)]
USB: OHCI: fix system hang caused by earlier patch
This patch (as1114) fixes a problem that was revealed by an earlier
patch (as1069b). Some broken controllers seem never to turn off their
RHCS interrupt status bit, even when told to do so. As a result they
generate an interrupt storm and hang the system.
The patch avoids enabling RHSC interrupt requests when the RHCS status
bit is already set. This should have no adverse affects on normal
controllers, since they won't set the status bit until a root-hub
status change actually occurs, in which case we wouldn't enable RHSC
interrupt requests anyway -- we would wait until the status change had
been processed and cleared.
David Brownell [Sat, 26 Jul 2008 15:06:24 +0000 (08:06 -0700)]
USB: fix USB boot crash, ecm_do_notify(), list_add corruption. prev->next should be next (ffff88003b8f82f8)
This fixes a BUG() turned up by Ingo via randconfig testing, where
CONFIG_LIST_DEBUG turned up list corruption. The corruption was
caused by the dummy_hcd (single-machine test harness for gadget and
HCD code) trashing the request queue when driven by the new CDC
composite gadget an I/O pattern that was previously uncommon.
Fix suggested by Alan Stern.
Wolfgang Mües [Tue, 29 Jul 2008 09:54:43 +0000 (11:54 +0200)]
usb: auerswald: remove driver (obsolete)
This patch removes the auerswald USB driver from the linux kernel
2.6.26.
This driver was included into the kernel mainly to connect to the ISDN
framework. This was done in linux 2.4.x. For 2.6.x, due to the fragile
and moving ISDN support, this connection was never realized, and the
only use of this driver was for device configuration. In the age of DSL,
the demand of ISDN support is getting very low.
Meanwhile, with the advent of libusb, an userspace driver was done for
the device configuration which works fine for linux and mac. (Thanks to
the libusb developers!). The userspace driver is downloadable from the
auerswald web site.
So this driver is obsolete now and has to be removed. Many thanks to all
developers which helped me to bring this driver up and working.
Signed-off-by: Wolfgang Muees <wolfgang@iksw-muees.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Wed, 13 Aug 2008 22:17:49 +0000 (15:17 -0700)]
Merge git://oss.sgi.com:8090/xfs/linux-2.6
* git://oss.sgi.com:8090/xfs/linux-2.6: (45 commits)
[XFS] Fix use after free in xfs_log_done().
[XFS] Make xfs_bmap_*_count_leaves void.
[XFS] Use KM_NOFS for debug trace buffers
[XFS] use KM_MAYFAIL in xfs_mountfs
[XFS] refactor xfs_mount_free
[XFS] don't call xfs_freesb from xfs_unmountfs
[XFS] xfs_unmountfs should return void
[XFS] cleanup xfs_mountfs
[XFS] move root inode IRELE into xfs_unmountfs
[XFS] stop using file_update_time
[XFS] optimize xfs_ichgtime
[XFS] update timestamp in xfs_ialloc manually
[XFS] remove the sema_t from XFS.
[XFS] replace dquot flush semaphore with a completion
[XFS] replace inode flush semaphore with a completion
[XFS] extend completions to provide XFS object flush requirements
[XFS] replace the XFS buf iodone semaphore with a completion
[XFS] clean up stale references to semaphores
[XFS] use get_unaligned_* helpers
[XFS] Fix compile failure in xfs_buf_trace()
...
David Teigland [Thu, 31 Jul 2008 14:31:53 +0000 (09:31 -0500)]
dlm: rename structs
Add a dlm_ prefix to the struct names in config.c. This resolves a
conflict with struct node in particular, when include/linux/node.h
happens to be included.
Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Teigland <teigland@redhat.com>
Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end()
around the padlock instructions fix the oops.
Suresh wrote:
These padlock instructions though don't use/touch SSE registers, but it behaves
similar to other SSE instructions. For example, it might cause DNA faults
when cr0.ts is set. While this is a spurious DNA trap, it might cause
oops with the recent fpu code changes.
This is the code sequence that is probably causing this problem:
a) new app is getting exec'd and it is somewhere in between
start_thread() and flush_old_exec() in the load_xyz_binary()
b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is
cleared.
c) Now we get an interrupt/softirq which starts using these encrypt/decrypt
routines in the network stack. This generates a math fault (as
cr0.ts is '1') which sets TS_USEDFPU and restores the math that is
in the task's xstate.
d) Return to exec code path, which does start_thread() which does
free_thread_xstate() and sets xstate pointer to NULL while
the TS_USEDFPU is still set.
e) At the next context switch from the new exec'd task to another task,
we have a scenarios where TS_USEDFPU is set but xstate pointer is null.
This can cause an oops during unlazy_fpu() in __switch_to()
Now:
1) This should happen with or with out pre-emption. Viro also encountered
similar problem with out CONFIG_PREEMPT.
2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because
kernel_fpu_begin() will manually do a clts() and won't run in to the
situation of setting TS_USEDFPU in step "c" above.
3) This was working before the fpu changes, because its a spurious
math fault which doesn't corrupt any fpu/sse registers and the task's
math state was always in an allocated state.
With out the recent lazy fpu allocation changes, while we don't see oops,
there is a possible race still present in older kernels(for example,
while kernel is using kernel_fpu_begin() in some optimized clear/copy
page and an interrupt/softirq happens which uses these padlock
instructions generating DNA fault).
This is the failing scenario that existed even before the lazy fpu allocation
changes:
0. CPU's TS flag is set
1. kernel using FPU in some optimized copy routine and while doing
kernel_fpu_begin() takes an interrupt just before doing clts()
2. Takes an interrupt and ipsec uses padlock instruction. And we
take a DNA fault as TS flag is still set.
3. We handle the DNA fault and set TS_USEDFPU and clear cr0.ts
4. We complete the padlock routine
5. Go back to step-1, which resumes clts() in kernel_fpu_begin(), finishes
the optimized copy routine and does kernel_fpu_end(). At this point,
we have cr0.ts again set to '1' but the task's TS_USEFPU is stilll
set and not cleared.
6. Now kernel resumes its user operation. And at the next context
switch, kernel sees it has do a FP save as TS_USEDFPU is still set
and then will do a unlazy_fpu() in __switch_to(). unlazy_fpu()
will take a DNA fault, as cr0.ts is '1' and now, because we are
in __switch_to(), math_state_restore() will get confused and will
restore the next task's FP state and will save it in prev tasks's FP state.
Remember, in __switch_to() we are already on the stack of the next task
but take a DNA fault for the prev task.
This causes the fpu leakage.
Fix the padlock instruction usage by calling them inside the
context of new routines irq_ts_save/restore(), which clear/restore cr0.ts
manually in the interrupt context. This will not generate spurious DNA
in the context of the interrupt which will fix the oops encountered and
the possible FPU leakage issue.
Reported-and-bisected-by: Wolfgang Walter <wolfgang.walter@stwm.de> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
introduced a typo that broke AEAD chunk testing. In particular,
axbuf should really be xbuf.
There is also an issue with testing the last segment when encrypting.
The additional part produced by AEAD wasn't tested. Similarly, on
decryption the additional part of the AEAD input is mistaken for
corruption.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lee Nipper [Wed, 30 Jul 2008 08:26:57 +0000 (16:26 +0800)]
crypto: talitos - Add handling for SEC 3.x treatment of link table
Later SEC revision requires the link table (used for scatter/gather)
to have an extra entry to account for the total length in descriptor [4],
which contains cipher Input and ICV.
This only applies to decrypt, not encrypt.
Without this change, on 837x, a gather return/length error results
when a decryption uses a link table to gather the fragments.
This is observed by doing a ping with size of 1447 or larger with AES,
or a ping with size 1455 or larger with 3des.
So, add check for SEC compatible "fsl,3.0" for using extra link table entry.
Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lachlan McIlroy [Wed, 13 Aug 2008 06:51:57 +0000 (16:51 +1000)]
[XFS] Use KM_NOFS for debug trace buffers
Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.
In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
xfs_mount_free mostly frees the perag data, which is something that is
duplicated in the mount error path.
Move the XFS_QM_DONE call to the caller and remove the useless
mutex_destroy/spinlock_destroy calls so that we can re-use it for the
mount error path. Also rename it to xfs_free_perag to reflect what it
does.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31836a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_readsb is called before xfs_mount so xfs_freesb should be called after
xfs_unmountfs, too. This means it now happens after a few things during
the of xfs_unmount which all have nothing to do with the superblock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31835a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The root inode is allocated in xfs_mountfs so it should be release in
xfs_unmountfs. For the unmount case that means we do it after the the
xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the
dmapi unmount event. Note that both reference the rip variable which might
be freed by that time in case inode flushing has kicked in, so strictly
speaking this might count as a bug fix
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31830a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no
need to call file_update_time and then copy the values over to the XFS
inode. The only additional thing in file_update_time are checks not
applicable to the write path.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31829a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
Port a little optmization from file_update_time to xfs_ichgtime, and only
update the timestamp and mark the inode dirty if the timestamp actually
changes in the timer tick resultion supported by the running kernel.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31827a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.
So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
David Chinner [Wed, 13 Aug 2008 06:40:43 +0000 (16:40 +1000)]
[XFS] extend completions to provide XFS object flush requirements
XFS object flushing doesn't quite match existing completion semantics. It
mixed exclusive access with completion. That is, we need to mark an object as
being flushed before flushing it to disk, and then block any other attempt to
flush it until the completion occurs. We do this but adding an extra count to
the completion before we start using them. However, we still need to
determine if there is a completion in progress, and allow no-blocking attempts
fo completions to decrement the count.
To do this we introduce:
int try_wait_for_completion(struct completion *x)
returns a failure status if done == 0, otherwise decrements done
to zero and returns a "started" status. This is provided
to allow counted completions to begin safely while holding
object locks in inverted order.
int completion_done(struct completion *x)
returns 1 if there is no waiter, 0 if there is a waiter
(i.e. a completion in progress).
This replaces the use of semaphores for providing this exclusion
and completion mechanism.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31816a
Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
David Chinner [Wed, 13 Aug 2008 06:36:11 +0000 (16:36 +1000)]
[XFS] replace the XFS buf iodone semaphore with a completion
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a
completion. Change it to a completion and remove the last user of the
sema_t from XFS.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31815a
Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
David Chinner [Wed, 13 Aug 2008 06:34:31 +0000 (16:34 +1000)]
[XFS] clean up stale references to semaphores
A lot of code has been converted away from semaphores, but there are still
comments that reference semaphore behaviour. The log code is the worst
offender. Update the comments to reflect what the code really does now.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31814a
Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
[XFS] Use the same btree_cur union member for alloc and inobt trees.
The alloc and inobt btree use the same agbp/agno pair in the btree_cur
union. Make them use the same bc_private.a union member so that code for
these two short form btree implementations can be shared.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31788a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now
because that's the only place it needs to be done, xfs_initialize_vnode is
renamed to xfs_setup_inode and loses all superflous paramaters. The check
for I_NEW is removed because it always is true and the di_mode check moves
into xfs_iget_core because it's only needed there.
xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode
and the whole things is moved into xfs_iops.c where it belongs.
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When multiple inodes are locked in XFS it happens in order of the inode
number, with the everything but the first inode trylocked if any of the
previous inodes is in the AIL.
Except for the sorting of the inodes this logic is implemented in
xfs_lock_inodes, but also partially duplicated in xfs_lock_dir_and_entry
in a particularly stupid way adds a lock roundtrip if the inode ordering
is not optimal.
This patch adds a new helper xfs_lock_two_inodes that takes two inodes and
locks them in the most optimal way according to the above locking protocol
and uses it for all places that want to lock two inodes.
The only caller of xfs_lock_inodes is xfs_rename which might lock up to
four inodes.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31772a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All the error injection is already enabled through ifdef DEBUG, so kill
the never set second cpp symbol to activate it without the rest of the
debugging infrastructure.
Now that all direct calls to VN_HOLD/VN_RELE are gone we can implement
IHOLD/IRELE directly.
For the IHOLD case also replace igrab with a direct increment of i_count
because we are guaranteed to already have a live and referenced inode by
the VFS. Also remove the vn_hold statistic because it's been rather
meaningless for some time with most references done by other callers.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31764a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
[XFS] remove spurious VN_HOLD/VN_RELE calls from xfs_acl.c
All the ACL routines are called from inode operations which are guaranteed
to have a referenced inode by the VFS, so there's no need for the ACL code
to grab another temporary one.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31763a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a helper to free the m_fsname/m_rtname/m_logname allocations and use
it properly for all mount failure cases. Also switch the allocations for
these to kstrdup while we're at it.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31728a
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Niv Sardi [Wed, 13 Aug 2008 06:03:35 +0000 (16:03 +1000)]
[XFS] Move attr log alloc size calculator to another function.
We will need that to be able to calculate the size of log we need for a
specific attr (for Create+EA). The local flag is needed so that we can
fail if we run into ENOSPC when trying to alloc blocks.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31727a
Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
David Chinner [Wed, 13 Aug 2008 06:02:51 +0000 (16:02 +1000)]
[XFS] Use KM_NOFS for incore inode extent tree allocation V2
If we allow incore extent tree allocations to recurse into the
filesystem under memory pressure, new delayed allocations through
xfs_iomap_write_delay() can deadlock on themselves if memory
reclaim tries to write back dirty pages from that inode.
It will deadlock in xfs_iomap_write_allocate() trying to take the
ilock we already hold. This can also show up as complex ABBA deadlocks
when multiple threads are triggering memory reclaim when trying to
allocate extents.
The main cause of this is the fact that delayed allocation is not done in
a transaction, so KM_NOFS is not automatically added to the allocations to
prevent this recursion.
Mark all allocations done for the incore inode extent tree as KM_NOFS to
ensure they never recurse back into the filesystem.
Version 2: o KM_NOFS implies KM_SLEEP, so just use KM_NOFS
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31726a
Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
David Chinner [Wed, 13 Aug 2008 05:45:15 +0000 (15:45 +1000)]
[XFS] Avoid directly referencing the VFS inode.
In several places we directly convert from the XFS inode
to the linux (VFS) inode by a simple deference of ip->i_vnode.
We should not do this - a helper function should be used to
extract the VFS inode from the XFS inode.
Introduce the function VFS_I() to extract the VFS inode
from the XFS inode. The name was chosen to match XFS_I() which
is used to extract the XFS inode from the VFS inode.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31720a
Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Lachlan McIlroy [Wed, 13 Aug 2008 05:42:10 +0000 (15:42 +1000)]
[XFS] Do not access buffers after dropping reference count
We should not access a buffer after dropping it's reference count
otherwise we could race with another thread that releases the final
reference count and frees the buffer causing us to access potentially
unmapped memory. The bug this change fixes only occured on DEBUG XFS since
the offending code was in an ASSERT.
SGI-PV: 984429
SGI-Modid: xfs-linux-melb:xfs-kern:31715a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
Linus Torvalds [Tue, 12 Aug 2008 23:38:45 +0000 (16:38 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/ehca: Discard double CQE for one WR
IB/ehca: Check idr_find() return value
IB/ehca: Repoll CQ on invalid opcode
IB/ehca: Rename goto label in ehca_poll_cq_one()
IB/ehca: Update qp_state on cached modify_qp()
IPoIB/cm: Use vmalloc() to allocate rx_rings
Linus Torvalds [Tue, 12 Aug 2008 23:07:48 +0000 (16:07 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] use bcd2bin/bin2bcd
[IA64] Ensure cpu0 can access per-cpu variables in early boot code
Bernhard Walle [Tue, 12 Aug 2008 22:09:14 +0000 (15:09 -0700)]
firmware/memmap: cleanup
Various cleanup the drivers/firmware/memmap (after review by AKPM):
- fix kdoc to conform to the standard
- move kdoc from header to implementation files
- remove superfluous WARN_ON() after kmalloc()
- WARN_ON(x); if (!x) -> if(!WARN_ON(x))
- improve some comments
Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Abbott [Tue, 12 Aug 2008 22:09:11 +0000 (15:09 -0700)]
Make ioctl.h compatible with userland
The attached patch seems to already exist in a number of branches -- it
keeps popping up on Google for me, and is certainly already in Debian --
but is strangely absent from mainstream.
The problem appears to be that the patched file ends up as part of the
target toolchain, but unfortunately the gcc constant folding doesn't
appear to eliminate the __invalid_size_argument_for_IOC value early
enough. Certainly compiling C++ programs which use _IO... macros as
constants fails without this patch.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / mv-sheeva.git / log