Gleb Natapov [Mon, 21 Jan 2013 13:36:41 +0000 (15:36 +0200)]
KVM: VMX: remove special CPL cache access during transition to real mode.
Since vmx_get_cpl() always returns 0 when VCPU is in real mode it is no
longer needed. Also reset CPL cache to zero during transaction to
protected mode since transaction may happen while CS.selectors & 3 != 0,
but in reality CPL is 0.
Avi Kivity [Sat, 19 Jan 2013 17:51:52 +0000 (19:51 +0200)]
KVM: x86 emulator: covert SETCC to fastop
This is a bit of a special case since we don't have the usual
byte/word/long/quad switch; instead we switch on the condition code embedded
in the instruction.
Xiao Guangrong [Sun, 13 Jan 2013 15:49:07 +0000 (23:49 +0800)]
KVM: x86: improve reexecute_instruction
The current reexecute_instruction can not well detect the failed instruction
emulation. It allows guest to retry all the instructions except it accesses
on error pfn
For example, some cases are nested-write-protect - if the page we want to
write is used as PDE but it chains to itself. Under this case, we should
stop the emulation and report the case to userspace
Xiao Guangrong [Sun, 13 Jan 2013 15:46:52 +0000 (23:46 +0800)]
KVM: x86: let reexecute_instruction work for tdp
Currently, reexecute_instruction refused to retry all instructions if
tdp is enabled. If nested npt is used, the emulation may be caused by
shadow page, it can be fixed by dropping the shadow page. And the only
condition that tdp can not retry the instruction is the access fault
on error pfn
One such variable, slot, is enough for holding a pointer temporarily.
We also remove another local variable named slot, which is limited in
a block, since it is confusing to have the same name in this function.
KVM: MMU: Conditionally reschedule when kvm_mmu_slot_remove_write_access() takes a long time
If the userspace starts dirty logging for a large slot, say 64GB of
memory, kvm_mmu_slot_remove_write_access() needs to hold mmu_lock for
a long time such as tens of milliseconds. This patch controls the lock
hold time by asking the scheduler if we need to reschedule for others.
One penalty for this is that we need to flush TLBs before releasing
mmu_lock. But since holding mmu_lock for a long time does affect not
only the guest, vCPU threads in other words, but also the host as a
whole, we should pay for that.
In practice, the cost will not be so high because we can protect a fair
amount of memory before being rescheduled: on my test environment,
cond_resched_lock() was called only once for protecting 12GB of memory
even without THP. We can also revisit Avi's "unlocked TLB flush" work
later for completely suppressing extra TLB flushes if needed.
KVM: Make kvm_mmu_change_mmu_pages() take mmu_lock by itself
No reason to make callers take mmu_lock since we do not need to protect
kvm_mmu_change_mmu_pages() and kvm_mmu_slot_remove_write_access()
together by mmu_lock in kvm_arch_commit_memory_region(): the former
calls kvm_mmu_commit_zap_page() and flushes TLBs by itself.
Note: we do not need to protect kvm->arch.n_requested_mmu_pages by
mmu_lock as can be seen from the fact that it is read locklessly.
KVM: MMU: Make kvm_mmu_slot_remove_write_access() rmap based
This makes it possible to release mmu_lock and reschedule conditionally
in a later patch. Although this may increase the time needed to protect
the whole slot when we start dirty logging, the kernel should not allow
the userspace to trigger something that will hold a spinlock for such a
long time as tens of milliseconds: actually there is no limit since it
is roughly proportional to the number of guest pages.
Another point to note is that this patch removes the only user of
slot_bitmap which will cause some problems when we increase the number
of slots further.
KVM: Write protect the updated slot only when dirty logging is enabled
Calling kvm_mmu_slot_remove_write_access() for a deleted slot does
nothing but search for non-existent mmu pages which have mappings to
that deleted memory; this is safe but a waste of time.
Since we want to make the function rmap based in a later patch, in a
manner which makes it unsafe to be called for a deleted slot, we makes
the caller see if the slot is non-zero and being dirty logged.
Xiao Guangrong [Tue, 8 Jan 2013 06:36:51 +0000 (14:36 +0800)]
KVM: MMU: fix infinite fault access retry
We have two issues in current code:
- if target gfn is used as its page table, guest will refault then kvm will use
small page size to map it. We need two #PF to fix its shadow page table
- sometimes, say a exception is triggered during vm-exit caused by #PF
(see handle_exception() in vmx.c), we remove all the shadow pages shadowed
by the target gfn before go into page fault path, it will cause infinite
loop:
delete shadow pages shadowed by the gfn -> try to use large page size to map
the gfn -> retry the access ->...
To fix these, we can adjust page size early if the target gfn is used as page
table
Xiao Guangrong [Tue, 8 Jan 2013 06:36:04 +0000 (14:36 +0800)]
KVM: MMU: fix Dirty bit missed if CR0.WP = 0
If the write-fault access is from supervisor and CR0.WP is not set on the
vcpu, kvm will fix it by adjusting pte access - it sets the W bit on pte
and clears U bit. This is the chance that kvm can change pte access from
readonly to writable
Unfortunately, the pte access is the access of 'direct' shadow page table,
means direct sp.role.access = pte_access, then we will create a writable
spte entry on the readonly shadow page table. It will cause Dirty bit is
not tracked when two guest ptes point to the same large page. Note, it
does not have other impact except Dirty bit since cr0.wp is encoded into
sp.role
It can be fixed by adjusting pte access before establishing shadow page
table. Also, after that, no mmu specified code exists in the common function
and drop two parameters in set_spte
Alexander Graf [Fri, 4 Jan 2013 17:12:48 +0000 (18:12 +0100)]
KVM: PPC: BookE: Implement EPR exit
The External Proxy Facility in FSL BookE chips allows the interrupt
controller to automatically acknowledge an interrupt as soon as a
core gets its pending external interrupt delivered.
Today, user space implements the interrupt controller, so we need to
check on it during such a cycle.
This patch implements logic for user space to enable EPR exiting,
disable EPR exiting and EPR exiting itself, so that user space can
acknowledge an interrupt when an external interrupt has successfully
been delivered into the guest vcpu.
Alexander Graf [Fri, 4 Jan 2013 17:02:14 +0000 (18:02 +0100)]
KVM: PPC: BookE: Emulate mfspr on EPR
The EPR register is potentially valid for PR KVM as well, so we need
to emulate accesses to it. It's only defined for reading, so only
handle the mfspr case.
Mihai Caraman [Thu, 20 Dec 2012 04:52:39 +0000 (04:52 +0000)]
KVM: PPC: Fix mfspr/mtspr MMUCFG emulation
On mfspr/mtspr emulation path Book3E's MMUCFG SPR with value 1015 clashes
with G4's MSSSR0 SPR. Move MSSSR0 emulation from generic part to Books3S.
MSSSR0 also clashes with Book3S's DABRX SPR. DABRX was not explicitly
handled so Book3S execution flow will behave as before.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Fri, 14 Dec 2012 22:42:05 +0000 (23:42 +0100)]
KVM: PPC: Book3S: PR: Enable alternative instruction for SC 1
When running on top of pHyp, the hypercall instruction "sc 1" goes
straight into pHyp without trapping in supervisor mode.
So if we want to support PAPR guest in this configuration we need to
add a second way of accessing PAPR hypercalls, preferably with the
exact same semantics except for the instruction.
So let's overlay an officially reserved instruction and emulate PAPR
hypercalls whenever we hit that one.
Mihai Caraman [Tue, 11 Dec 2012 03:38:23 +0000 (03:38 +0000)]
KVM: PPC: Fix SREGS documentation reference
Reflect the uapi folder change in SREGS API documentation.
Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
KVM: s390: Gracefully handle busy conditions on ccw_device_start
In rare cases a virtio command might try to issue a ccw before a former
ccw was answered with a tsch. This will cause CC=2 (busy). Lets just
retry in that case.
Cornelia Huck [Mon, 7 Jan 2013 14:51:51 +0000 (15:51 +0100)]
KVM: s390: Dynamic allocation of virtio-ccw I/O data.
Dynamically allocate any data structures like ccw used when
doing channel I/O. Otherwise, we'd need to add extra serialization
for the different callbacks using the same data structures.
Avi Kivity [Fri, 4 Jan 2013 14:18:48 +0000 (16:18 +0200)]
KVM: x86 emulator: framework for streamlining arithmetic opcodes
We emulate arithmetic opcodes by executing a "similar" (same operation,
different operands) on the cpu. This ensures accurate emulation, esp. wrt.
eflags. However, the prologue and epilogue around the opcode is fairly long,
consisting of a switch (for the operand size) and code to load and save the
operands. This is repeated for every opcode.
This patch introduces an alternative way to emulate arithmetic opcodes.
Instead of the above, we have four (three on i386) functions consisting
of just the opcode and a ret; one for each operand size. For example:
.align 8
em_notb:
not %al
ret
.align 8
em_notw:
not %ax
ret
.align 8
em_notl:
not %eax
ret
.align 8
em_notq:
not %rax
ret
The prologue and epilogue are shared across all opcodes. Note the functions
use a special calling convention; notably eflags is an input/output parameter
and is not clobbered. Rather than dispatching the four functions through a
jump table, the functions are declared as a constant size (8) so their address
can be calculated.
Gleb Natapov [Thu, 27 Dec 2012 12:44:58 +0000 (14:44 +0200)]
KVM: MMU: simplify folding of dirty bit into accessed_dirty
MMU code tries to avoid if()s HW is not able to predict reliably by using
bitwise operation to streamline code execution, but in case of a dirty bit
folding this gives us nothing since write_fault is checked right before
the folding code. Lets just piggyback onto the if() to make code more clear.
Cornelia Huck [Thu, 20 Dec 2012 14:32:12 +0000 (15:32 +0100)]
KVM: s390: Add support for channel I/O instructions.
Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass
intercepts for channel I/O instructions to userspace. Only I/O
instructions interacting with I/O interrupts need to be handled
in-kernel:
- TEST PENDING INTERRUPTION (tpi) dequeues and stores pending
interrupts entirely in-kernel.
- TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel
and exits via KVM_EXIT_S390_TSCH to userspace for subchannel-
related processing.
Cornelia Huck [Thu, 20 Dec 2012 14:32:10 +0000 (15:32 +0100)]
KVM: s390: In-kernel handling of I/O instructions.
Explicitely catch all channel I/O related instructions intercepts
in the kernel and set condition code 3 for them.
This paves the way for properly handling these instructions later
on.
Note: This is not architecture compliant (the previous code wasn't
either) since setting cc 3 is not the correct thing to do for some
of these instructions. For Linux guests, however, it still has the
intended effect of stopping css probing.
Cornelia Huck [Thu, 20 Dec 2012 14:32:09 +0000 (15:32 +0100)]
KVM: s390: Add support for machine checks.
Add support for injecting machine checks (only repressible
conditions for now).
This is a bit more involved than I/O interrupts, for these reasons:
- Machine checks come in both floating and cpu varieties.
- We don't have a bit for machine checks enabling, but have to use
a roundabout approach with trapping PSW changing instructions and
watching for opened machine checks.
Gleb Natapov [Thu, 20 Dec 2012 14:57:47 +0000 (16:57 +0200)]
KVM: VMX: handle IO when emulation is due to #GP in real mode.
With emulate_invalid_guest_state=0 if a vcpu is in real mode VMX can
enter the vcpu with smaller segment limit than guest configured. If the
guest tries to access pass this limit it will get #GP at which point
instruction will be emulated with correct segment limit applied. If
during the emulation IO is detected it is not handled correctly. Vcpu
thread should exit to userspace to serve the IO, but it returns to the
guest instead. Since emulation is not completed till userspace completes
the IO the faulty instruction is re-executed ad infinitum.
The patch fixes that by exiting to userspace if IO happens during
instruction emulation.
Gleb Natapov [Thu, 20 Dec 2012 14:57:45 +0000 (16:57 +0200)]
KVM: VMX: fix emulation of invalid guest state.
Currently when emulation of invalid guest state is enable
(emulate_invalid_guest_state=1) segment registers are still fixed for
entry to vm86 mode some times. Segment register fixing is avoided in
enter_rmode(), but vmx_set_segment() still does it unconditionally.
The patch fixes it.
Gleb Natapov [Thu, 20 Dec 2012 14:57:44 +0000 (16:57 +0200)]
KVM: VMX: make rmode_segment_valid() more strict.
Currently it allows entering vm86 mode if segment limit is greater than
0xffff and db bit is set. Both of those can cause incorrect execution of
instruction by cpu since in vm86 mode limit will be set to 0xffff and db
will be forced to 0.
Gleb Natapov [Thu, 20 Dec 2012 14:57:42 +0000 (16:57 +0200)]
KVM: emulator: drop RPL check from linearize() function
According to Intel SDM Vol3 Section 5.5 "Privilege Levels" and 5.6
"Privilege Level Checking When Accessing Data Segments" RPL checking is
done during loading of a segment selector, not during data access. We
already do checking during segment selector loading, so drop the check
during data access. Checking RPL during data access triggers #GP if
after transition from real mode to protected mode RPL bits in a segment
selector are set.
Gleb Natapov [Wed, 12 Dec 2012 17:10:51 +0000 (19:10 +0200)]
KVM: VMX: return correct segment limit and flags for CS/SS registers in real mode
VMX without unrestricted mode cannot virtualize real mode, so if
emulate_invalid_guest_state=0 kvm uses vm86 mode to approximate
it. Sometimes, when guest moves from protected mode to real mode, it
leaves segment descriptors in a state not suitable for use by vm86 mode
virtualization, so we keep shadow copy of segment descriptors for internal
use and load fake register to VMCS for guest entry to succeed. Till
now we kept shadow for all segments except SS and CS (for SS and CS we
returned parameters directly from VMCS), but since commit a5625189f6810
emulator enforces segment limits in real mode. This causes #GP during move
from protected mode to real mode when emulator fetches first instruction
after moving to real mode since it uses incorrect CS base and limit to
linearize the %rip. Fix by keeping shadow for SS and CS too.
Gleb Natapov [Wed, 12 Dec 2012 17:10:50 +0000 (19:10 +0200)]
KVM: VMX: relax check for CS register in rmode_segment_valid()
rmode_segment_valid() checks if segment descriptor can be used to enter
vm86 mode. VMX spec mandates that in vm86 mode CS register will be of
type data, not code. Lets allow guest entry with vm86 mode if the only
problem with CS register is incorrect type. Otherwise entire real mode
will be emulated.
Alex Williamson [Fri, 21 Dec 2012 15:20:16 +0000 (08:20 -0700)]
kvm: Fix memory slot generation updates
Previous patch "kvm: Minor memory slot optimization" (b7f69c555ca43)
overlooked the generation field of the memory slots. Re-using the
original memory slots left us with with two slightly different memory
slots with the same generation. To fix this, make update_memslots()
take a new parameter to specify the last generation. This also makes
generation management more explicit to avoid such problems in the future.
Cornelia Huck [Fri, 14 Dec 2012 16:02:16 +0000 (17:02 +0100)]
KVM: s390: Handle hosts not supporting s390-virtio.
Running under a kvm host does not necessarily imply the presence of
a page mapped above the main memory with the virtio information;
however, the code includes a hard coded access to that page.
Instead, check for the presence of the page and exit gracefully
before we hit an addressing exception if it does not exist.
The kvm i8254 emulation for counter 0 (but not for counters 1 and 2)
has at least two bugs in mode 0:
1. The OUT bit, computed by pit_get_out(), is never set high.
2. The counter value, computed by pit_get_count(), wraps back around to
the initial counter value, rather than wrapping back to 0xFFFF
(which is the behavior described in the comment in __kpit_elapsed,
the behavior implemented by qemu, and the behavior observed on AMD
hardware).
The bug stems from __kpit_elapsed computing the elapsed time mod the
initial counter value (stored as nanoseconds in ps->period). This is both
unnecessary (none of the callers of kpit_elapsed expect the value to be
at most the initial counter value) and incorrect (it causes pit_get_count
to appear to wrap around to the initial counter value rather than 0xFFFF).
Removing this mod from __kpit_elapsed fixes both of the above bugs.
Alex Williamson [Mon, 10 Dec 2012 17:33:38 +0000 (10:33 -0700)]
KVM: Increase user memory slots on x86 to 125
With the 3 private slots, this gives us a nice round 128 slots total.
The primary motivation for this is to support more assigned devices.
Each assigned device can theoretically use up to 8 slots (6 MMIO BARs,
1 ROM BAR, 1 spare for a split MSI-X table mapping) though it's far
more typical for a device to use 3-4 slots. If we assume a typical VM
uses a dozen slots for non-assigned devices purposes, we should always
be able to support 14 worst case assigned devices or 28 to 37 typical
devices.
Alex Williamson [Mon, 10 Dec 2012 17:33:32 +0000 (10:33 -0700)]
KVM: struct kvm_memory_slot.id -> short
We're currently offering a whopping 32 memory slots to user space, an
int is a bit excessive for storing this. We would like to increase
our memslots, but SHRT_MAX should be more than enough.
Alex Williamson [Mon, 10 Dec 2012 17:33:26 +0000 (10:33 -0700)]
KVM: struct kvm_memory_slot.flags -> u32
struct kvm_userspace_memory_region.flags is a u32 with a comment that
bits 0 ~ 15 are visible to userspace and the other bits are reserved
for kvm internal use. KVM_MEMSLOT_INVALID is the only internal use
flag and it has a comment that bits 16 ~ 31 are internally used and
the other bits are visible to userspace.
Therefore, let's define this as a u32 so we don't waste bytes on LP64
systems. Move to the end of the struct for alignment.
Alex Williamson [Mon, 10 Dec 2012 17:33:15 +0000 (10:33 -0700)]
KVM: Make KVM_PRIVATE_MEM_SLOTS optional
Seems like everyone copied x86 and defined 4 private memory slots
that never actually get used. Even x86 only uses 3 of the 4. These
aren't exposed so there's no need to add padding.
Alex Williamson [Mon, 10 Dec 2012 17:33:03 +0000 (10:33 -0700)]
KVM: Minor memory slot optimization
If a slot is removed or moved in the guest physical address space, we
first allocate and install a new slot array with the invalidated
entry. The old array is then freed. We then proceed to allocate yet
another slot array to install the permanent replacement. Re-use the
original array when this occurs and avoid the extra kfree/kmalloc.
Alex Williamson [Mon, 10 Dec 2012 17:32:57 +0000 (10:32 -0700)]
KVM: Fix iommu map/unmap to handle memory slot moves
The iommu integration into memory slots expects memory slots to be
added or removed and doesn't handle the move case. We can unmap
slots from the iommu after we mark them invalid and map them before
installing the final memslot array. Also re-order the kmemdup vs
map so we don't leave iommu mappings if we get ENOMEM.
Alex Williamson [Mon, 10 Dec 2012 17:32:51 +0000 (10:32 -0700)]
KVM: Check userspace_addr when modifying a memory slot
The API documents that only flags and guest physical memory space can
be modified on an existing slot, but we don't enforce that the
userspace address cannot be modified. Instead we just ignore it.
This means that a user may think they've successfully moved both the
guest and user addresses, when in fact only the guest address changed.
Check and error instead.
Alex Williamson [Mon, 10 Dec 2012 17:32:45 +0000 (10:32 -0700)]
KVM: Restrict non-existing slot state transitions
The API documentation states:
When changing an existing slot, it may be moved in the guest
physical memory space, or its flags may be modified.
An "existing slot" requires a non-zero npages (memory_size). The only
transition we should therefore allow for a non-existing slot should be
to create the slot, which includes setting a non-zero memory_size. We
currently allow calls to modify non-existing slots, which is pointless,
confusing, and possibly wrong.
With this we know that the invalidation path of __kvm_set_memory_region
is always for a delete or move and never for adding a zero size slot.
Gleb Natapov [Mon, 10 Dec 2012 12:05:55 +0000 (14:05 +0200)]
KVM: inject ExtINT interrupt before APIC interrupts
According to Intel SDM Volume 3 Section 10.8.1 "Interrupt Handling with
the Pentium 4 and Intel Xeon Processors" and Section 10.8.2 "Interrupt
Handling with the P6 Family and Pentium Processors" ExtINT interrupts are
sent directly to the processor core for handling. Currently KVM checks
APIC before it considers ExtINT interrupts for injection which is
backwards from the spec. Make code behave according to the SDM.
Nadav Amit [Thu, 6 Dec 2012 23:55:10 +0000 (21:55 -0200)]
KVM: x86: fix mov immediate emulation for 64-bit operands
MOV immediate instruction (opcodes 0xB8-0xBF) may take 64-bit operand.
The previous emulation implementation assumes the operand is no longer than 32.
Adding OpImm64 for this matter.
Linus Torvalds [Thu, 13 Dec 2012 23:31:08 +0000 (15:31 -0800)]
Merge tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Marcelo Tosatti:
"Considerable KVM/PPC work, x86 kvmclock vsyscall support,
IA32_TSC_ADJUST MSR emulation, amongst others."
Fix up trivial conflict in kernel/sched/core.c due to cross-cpu
migration notifier added next to rq migration call-back.
* tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (156 commits)
KVM: emulator: fix real mode segment checks in address linearization
VMX: remove unneeded enable_unrestricted_guest check
KVM: VMX: fix DPL during entry to protected mode
x86/kexec: crash_vmclear_local_vmcss needs __rcu
kvm: Fix irqfd resampler list walk
KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump
x86/kexec: VMCLEAR VMCSs loaded on all cpus if necessary
KVM: MMU: optimize for set_spte
KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interface
KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulation
KVM: PPC: bookehv: Add guest computation mode for irq delivery
KVM: PPC: Make EPCR a valid field for booke64 and bookehv
KVM: PPC: booke: Extend MAS2 EPN mask for 64-bit
KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulation
KVM: PPC: Mask ea's high 32-bits in 32/64 instr emulation
KVM: PPC: e500: Add emulation helper for getting instruction ea
KVM: PPC: bookehv64: Add support for interrupt handling
KVM: PPC: bookehv: Remove GET_VCPU macro from exception handler
KVM: PPC: booke: Fix get_tb() compile error on 64-bit
KVM: PPC: e500: Silence bogus GCC warning in tlb code
...
Linus Torvalds [Thu, 13 Dec 2012 22:29:16 +0000 (14:29 -0800)]
Merge tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen updates from Konrad Rzeszutek Wilk:
- Add necessary infrastructure to make balloon driver work under ARM.
- Add /dev/xen/privcmd interfaces to work with ARM and PVH.
- Improve Xen PCIBack wild-card parsing.
- Add Xen ACPI PAD (Processor Aggregator) support - so can offline/
online sockets depending on the power consumption.
- PVHVM + kexec = use an E820_RESV region for the shared region so we
don't overwrite said region during kexec reboot.
- Cleanups, compile fixes.
Fix up some trivial conflicts due to the balloon driver now working on
ARM, and there were changes next to the previous work-arounds that are
now gone.
* tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/PVonHVM: fix compile warning in init_hvm_pv_info
xen: arm: implement remap interfaces needed for privcmd mappings.
xen: correctly use xen_pfn_t in remap_domain_mfn_range.
xen: arm: enable balloon driver
xen: balloon: allow PVMMU interfaces to be compiled out
xen: privcmd: support autotranslated physmap guests.
xen: add pages parameter to xen_remap_domain_mfn_range
xen/acpi: Move the xen_running_on_version_or_later function.
xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h
xen/acpi: Fix compile error by missing decleration for xen_domain.
xen/acpi: revert pad config check in xen_check_mwait
xen/acpi: ACPI PAD driver
xen-pciback: reject out of range inputs
xen-pciback: simplify and tighten parsing of device IDs
xen PVonHVM: use E820_Reserved area for shared_info
Linus Torvalds [Thu, 13 Dec 2012 22:20:19 +0000 (14:20 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 update from Martin Schwidefsky:
"Add support to generate code for the latest machine zEC12, MOD and XOR
instruction support for the BPF jit compiler, the dasd safe offline
feature and the big one: the s390 architecture gets PCI support!!
Right before the world ends on the 21st ;-)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/qdio: rename the misleading PCI flag of qdio devices
s390/pci: remove obsolete email addresses
s390/pci: speed up __iowrite64_copy by using pci store block insn
s390/pci: enable NEED_DMA_MAP_STATE
s390/pci: no msleep in potential IRQ context
s390/pci: fix potential NULL pointer dereference in dma_free_seg_table()
s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
s390/bpf,jit: add support for XOR instruction
s390/bpf,jit: add support MOD instruction
s390/cio: fix pgid reserved check
vga: compile fix, disable vga for s390
s390/pci: add PCI Kconfig options
s390/pci: s390 specific PCI sysfs attributes
s390/pci: PCI hotplug support via SCLP
s390/pci: CHSC PCI support for error and availability events
s390/pci: DMA support
s390/pci: PCI adapter interrupts for MSI/MSI-X
s390/bitops: find leftmost bit instruction support
s390/pci: CLP interface
s390/pci: base support
...
Linus Torvalds [Thu, 13 Dec 2012 21:23:33 +0000 (13:23 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.
Fix up trivial conflict (m68k switched to generic version of
uapi/asm/socket.h, net tree updated the old one) as per Geert.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/sun3: Fix instruction faults
m68k/sun3: Get interrupts working again
m68k: move to a single instance of free_initmem()
m68k: merge MMU and non-MMU versions of mm/init.c
m68k: switch to using the asm-generic termios.h
m68k: switch to using the asm-generic termbits.h
m68k: switch to using the asm-generic sockios.h
m68k: switch to using the asm-generic socket.h
m68k: switch to using the asm-generic shmbuf.h
m68k: switch to using the asm-generic sembuf.h
m68k: switch to using the asm-generic msgbuf.h
m68k: switch to using the asm-generic auxvec.h
m68k: switch to using the asm-generic shmparam.h
m68k: switch to using the asm-generic spinlock.h
m68k: switch to using the asm-generic hw_irq.h
arch/m68k: remove CONFIG_EXPERIMENTAL
Pull networking fixes from David Miller:
"A pile of fixes in response to yesterday's big merge. The SCTP HMAC
thing hasn't been addressed yet, I'll take care of that myself if Neil
and Vlad don't show signs of life by tomorrow.
1) Use after free of SKB in tuntap code. Fix by Eric Dumazet,
reported by Dave Jones.
2) NFC LLCP code emits annoying kernel log message, triggerable by
the user. From Dave Jones.
3) Fix several endianness bugs noticed by sparse in the bridging
code, from Stephen Hemminger.
4) Ipv6 NDISC code doesn't take padding into account properly, fix
from YOSHIFUJI Hideaki.
5) Add missing docs to ethtool_flow_ext struct, from Yan Burman."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
bridge: fix icmpv6 endian bug and other sparse warnings
net: ethool: Document struct ethtool_flow_ext
ndisc: Fix padding error in link-layer address option.
tuntap: dont use skb after netif_rx_ni(skb)
nfc: remove noisy message from llcp_sock_sendmsg
Linus Torvalds [Thu, 13 Dec 2012 21:11:15 +0000 (13:11 -0800)]
Merge branch 'akpm' (Andrew's patch-bomb)
Merge misc VM changes from Andrew Morton:
"The rest of most-of-MM. The other MM bits await a slab merge.
This patch includes the addition of a huge zero_page. Not a
performance boost but it an save large amounts of physical memory in
some situations.
Also a bunch of Fujitsu engineers are working on memory hotplug.
Which, as it turns out, was badly broken. About half of their patches
are included here; the remainder are 3.8 material."
However, this merge disables CONFIG_MOVABLE_NODE, which was totally
broken. We don't add new features with "default y", nor do we add
Kconfig questions that are incomprehensible to most people without any
help text. Does the feature even make sense without compaction or
memory hotplug?
* akpm: (54 commits)
mm/bootmem.c: remove unused wrapper function reserve_bootmem_generic()
mm/memory.c: remove unused code from do_wp_page()
asm-generic, mm: pgtable: consolidate zero page helpers
mm/hugetlb.c: fix warning on freeing hwpoisoned hugepage
hwpoison, hugetlbfs: fix RSS-counter warning
hwpoison, hugetlbfs: fix "bad pmd" warning in unmapping hwpoisoned hugepage
mm: protect against concurrent vma expansion
memcg: do not check for mm in __mem_cgroup_count_vm_event
tmpfs: support SEEK_DATA and SEEK_HOLE (reprise)
mm: provide more accurate estimation of pages occupied by memmap
fs/buffer.c: remove redundant initialization in alloc_page_buffers()
fs/buffer.c: do not inline exported function
writeback: fix a typo in comment
mm: introduce new field "managed_pages" to struct zone
mm, oom: remove statically defined arch functions of same name
mm, oom: remove redundant sleep in pagefault oom handler
mm, oom: cleanup pagefault oom handler
memory_hotplug: allow online/offline memory to result movable node
numa: add CONFIG_MOVABLE_NODE for movable-dedicated node
mm, memcg: avoid unnecessary function call when memcg is disabled
...
Linus Torvalds [Thu, 13 Dec 2012 20:14:47 +0000 (12:14 -0800)]
Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI update from Bjorn Helgaas:
"Host bridge hotplug:
- Untangle _PRT from struct pci_bus (Bjorn Helgaas)
- Request _OSC control before scanning root bus (Taku Izumi)
- Assign resources when adding host bridge (Yinghai Lu)
- Remove root bus when removing host bridge (Yinghai Lu)
- Remove _PRT during hot remove (Yinghai Lu)
SRIOV
- Add sysfs knobs to control numVFs (Don Dutile)
Power management
- Notify devices when power resource turned on (Huang Ying)
Bug fixes
- Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
- Keep runtime PM enabled for unbound PCI devices (Huang Ying)
- Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
- Fix xen frontend shutdown issue (David Vrabel)
- Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)
Miscellaneous
- Add GPL license for drivers/pci/ioapic (Andrew Cooks)
- Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
- NumaChip remote PCI support (Daniel Blueman)
- Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo
Han)
- Convert dev_printk() to dev_info(), etc (Joe Perches)
- Add support for non PCI BAR ROM data (Matthew Garrett)
- Add x86 support for host bridge translation offset (Mike Yoknis)
- Report success only when every driver supports AER (Vijay
Pandarathil)"
Fix up trivial conflicts.
* tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
PCI: Use phys_addr_t for physical ROM address
x86/PCI: Add NumaChip remote PCI support
ath9k: Use standard #defines for PCIe Capability ASPM fields
iwlwifi: Use standard #defines for PCIe Capability ASPM fields
iwlwifi: collapse wrapper for pcie_capability_read_word()
iwlegacy: Use standard #defines for PCIe Capability ASPM fields
iwlegacy: collapse wrapper for pcie_capability_read_word()
cxgb3: Use standard #defines for PCIe Capability ASPM fields
PCI: Add standard PCIe Capability Link ASPM field names
PCI/portdrv: Use PCI Express Capability accessors
PCI: Use standard PCIe Capability Link register field names
x86: Use PCI setup data
PCI: Add support for non-BAR ROMs
PCI: Add pcibios_add_device
EFI: Stash ROMs if they're not in the PCI BAR
PCI: Add and use standard PCI-X Capability register names
PCI/PM: Keep runtime PM enabled for unbound PCI devices
xen-pcifront: Handle backend CLOSED without CLOSING
PCI: SRIOV control and status via sysfs (documentation)
PCI/AER: Report success only when every device has AER-aware driver
...
Linus Torvalds [Thu, 13 Dec 2012 20:04:35 +0000 (12:04 -0800)]
Merge tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A fairly quiet release again, a couple of relatively small new
features and a bunch of driver specific work including yet more code
elimination and fixes from Axel Lin.
- Addidion of linear_min_sel for offsetting linear selectors in the
helpers.
- Support for continuous voltage ranges for regulators with extremely
high resolution.
- Drivers for AS3711, DA9055, MAX9873, TPS51632, TPS80031 and ARM
vexpress."
Fix up trivial conflict (due to typo fix) in palmas-regulator.c
* tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (80 commits)
regulator: core: Fix logic to determinate if regulator can change voltage
regulator: s5m8767: Fix to work even if no DVS gpio present
regulator: s5m8767: Fix to read the first DVS register.
regulator: s5m8767: Fix to work when platform registers less regulators
regulator: gpio-regulator: gpio_set_value should use cansleep
regulator: gpio-regulator: Fix logical error in for() loop
regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap
regulator: anatop: Use linear_min_sel with linear mapping
regulator: max1586: Implement get_voltage_sel callback
regulator: lp8788-buck: Kill _gpio_request function
regulator: tps80031: Convert tps80031_ldo_ops to linear_min_sel and list_voltage_linear
regulator: lp8788-ldo: Remove val array in lp8788_config_ldo_enable_mode
regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match
regulator: palmas: Convert palmas_ops_smps to regulator_[get|set]_voltage_sel_regmap
regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel
regulators: add regulator_can_change_voltage() function
regulator: tps51632: Ensure [base|max]_voltage_uV pdata settings are valid
regulator: wm831x-dcdc: Add MODULE_ALIAS for wm831x-boostp
regulator: wm831x-dcdc: Ensure selected voltage falls within requested range
regulator: tps51632: Use linear_min_sel and regulator_[map|list]_voltage_linear
...
projects / linux-beck.git / log