clk: hisi: refine parameter checking for init

*of_iomap()* will check the device node pointer, and if the pointer is
NULL it will return error code. So refine clock's init flow by checking
the device node with this simple way; and polish a little for the print
out message.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: versatile: off by one in clk_sp810_timerclken_of_get()

The ">" should be ">=" or we end up reading beyond the end of the array.

Fixes: 6e973d2c4385 ('clk: vexpress: Add separate SP810 driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: exynos4: Fix wrong clock for Exynos4x12 ADC

The TSADC gate clock was used in Exynos4x12 DTSI for exynos-adc driver.
However TSADC is present only on Exynos4210 so on Trats2 board (with
Exynos4412 SoC) the exynos-adc driver could not be probed:
   ERROR: could not get clock /adc@126C0000:adc(0)
   exynos-adc 126c0000.adc: failed getting clock, err = -2
   exynos-adc: probe of 126c0000.adc failed with error -2

Instead on Exynos4x12 SoCs the main clock used by Analog to Digital
Converter is located in different register and it is named in datasheet
as PCLK_ADC. Regardless of the name the purpose of this PCLK_ADC clock
is the same as purpose of TSADC from Exynos4210.

The patch adds gate clock for Exynos4x12 using the proper register so
backward compatibility is preserved. This fixes the probe of exynos-adc
driver on Exynos4x12 boards and allows accessing sensors connected to it
on Trats2 board (ntc,ncp15wb473 AP and battery thermistors).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: c63c57433003 ("ARM: dts: Add ADC's dt data to read raw data for exynos4x12")
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: kill off set_irq_flags usage

set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Mike Turquette <mturquette@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: zx: Constify parent names in clock init data

The array of parent names can be made as array of const pointers to
const strings.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: zx: Add audio and GPIO clock for zx296702

Add SPDIF/I2S and GPIO clock for zx296702

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: zx: Add audio div clock method for zx296702

Add SPDIF/I2S divider clock method for zx296702

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: s2mps11: Use kcalloc instead of kzalloc for array allocation

This patch cleans up the driver for,

  - Use devm_kcalloc() variant instead of devm_kzalloc() for array
    allocation.
  - clk_prepare()/unprepare(), remove "ret" variable as it is not required
  - use __exit for cleanup function

As I am referring this driver as a reference for my 88pm800 clk driver,
applying same changes here as well.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: Silence warnings about lock imbalances

The recursive spinlock implementation trips up sparse and it
complains that these functions have lock imbalances. That isn't
really true though, so add some __acquires() and __releases()
information so that sparse is quiet.

drivers/clk/clk.c:116:22: warning: context imbalance in 'clk_enable_lock' - wrong count at exit
drivers/clk/clk.c:141:9: warning: context imbalance in 'clk_enable_unlock' - unexpected unlock

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: basic-type: Silence warnings about lock imbalances

The basic clock types use conditional locking for the register
accessor spinlocks. Add __acquire() and __release() markings in
the right locations so that sparse isn't tripped up on the
conditional locking.

drivers/clk/clk-mux.c:68:12: warning: context imbalance in 'clk_mux_set_parent' - different lock contexts for basic block
drivers/clk/clk-divider.c:379:12: warning: context imbalance in 'clk_divider_set_rate' - different lock contexts for basic block
drivers/clk/clk-gate.c:71:9: warning: context imbalance in 'clk_gate_endisable' - different lock contexts for basic block
drivers/clk/clk-fractional-divider.c:36:9: warning: context imbalance in 'clk_fd_recalc_rate' - different lock contexts for basic block
drivers/clk/clk-fractional-divider.c:68:12: warning: context imbalance in 'clk_fd_set_rate' - different lock contexts for basic block

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: qcom: Give clk-qcom.ko module a GPLv2 license

The missing license causes the clk-qcom.ko module to taint the
kernel. Add the appropriate license to avoid taint.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: gpio: Mark parent_names array const

Let's encourage const arrays of parent names like other basic
clock types.

Cc: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge branch 'v4.3-topic/clk-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into clk-next

clk: allow a clk divider with max divisor when zero

This commit allows certain Broadcom STB clock dividers to be used with
clk-divider.c.  It allows for a clock whose field value is the equal
to the divisor, execpt when the field value is zero, in which case the
divisor is 2^width.  For example, consider a divisor clock with a two
bit field:

value divisor
0 4
1 1
2 2
3 3

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

clk: socfpga: switch to GENMASK()

Convert the code to use GENMASK() helper instead of div_mask() macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: pxa: fix core frequency reporting unit

Legacy drivers which are not yet ported, such as cpufreq-pxa[23]xx, rely
on pxaXXx_get_clk_frequency_khz() to find the CPU core frequency.

This reporting was broken because the expected unit is kHz and not
Hz. Fix the reporting for pxa25x, pxa27x and pxa3xx.

Fixes: fe7710fae477 ("clk: add pxa25x clock drivers")
Fixes: d40670dc6169 ("clk: add pxa27x clock drivers")
Fixes: 9bbb8a338fb2 ("clk: pxa: add pxa3xx clock driver")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: rockchip: Fix PLL bandwidth

In the TRM we see that BWADJ is "a 12-bit bus that selects the values
1-4096 for the bandwidth divider (NB)":
 NB = BWADJ[11:0] + 1
The recommended setting of NB: NB = NF / 2.

So:
  NB = NF / 2
  BWADJ[11:0] + 1 = NF / 2
  BWADJ[11:0] = NF / 2 - 1

Right now, we have:

{                                               \
        .rate   = _rate##U,                     \
        .nr = _nr,                              \
        .nf = _nf,                              \
        .no = _no,                              \
        .bwadj = (_nf >> 1),                    \
}

That means we set bwadj to NF / 2, not NF / 2 - 1

All of this is a bit confusing because we specify "NR" (the 1-based
value), "NF" (the 1-based value), "NO" (the 1-based value), but
"BWADJ" (the 0-based value) instead of "NB" (the 1-based value).

Let's change to working with "NB" and fix the off by one error.  This
may affect PLL jitter in a small way (hopefully for the better).

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge branch 'cleanup-clk-h-includes' into clk-next

* cleanup-clk-h-includes: (62 commits)
  clk: Remove clk.h from clk-provider.h
  clk: h8300: Remove clk.h and clkdev.h includes
  clk: at91: Include clk.h and slab.h
  clk: ti: Switch clk-provider.h include to clk.h
  clk: pistachio: Include clk.h
  clk: ingenic: Include clk.h
  clk: si570: Include clk.h
  clk: moxart: Include clk.h
  clk: cdce925: Include clk.h
  clk: Include clk.h in clk.c
  clk: zynq: Include clk.h
  clk: ti: Include clk.h
  clk: sunxi: Include clk.h and remove unused clkdev.h includes
  clk: st: Include clk.h
  clk: qcom: Include clk.h
  clk: highbank: Include clk.h
  clk: bcm: Include clk.h
  clk: versatile: Remove clk.h and clkdev.h includes
  clk: ux500: Remove clk.h and clkdev.h includes
  clk: tegra: Properly include clk.h
  ...

clk: ti: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: sunxi: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: "Emilio López" <emilio@elopez.com.ar>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: st: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by Gabriel Fernandez <gabriel.fernandez@st.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: keystone: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: at91: make use of of_clk_parent_fill helper function

Use of_clk_parent_fill to fill in the parent clock names' array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mediatek: Add MT8173 MMPLL change rate support

MT8173 MMPLL frequency settings are different from common PLLs.
It needs different post divider settings for some ranges of frequency.
This patch add support for MT8173 MMPLL frequency setting by adding
div-rate table to lookup suitable post divider setting under a
specified frequency.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mediatek: Fix calculation of PLL rate settings

Avoid u32 overflow when calculate post divider setting, and
increase the max post divider setting from 3 (/8) to 4 (/16).

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mediatek: Fix PLL registers setting flow

Write postdiv and pcw settings at the same time for PLLs if postdiv
and pcw settings are on the same register.

This is need by PLLs such as MT8173 MMPLL and ARM*PLL.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: Allow providers to configure min/max rates

clk providers are using the consumer APIs to set min/max rates on
the clock they're providing. To encourage clk providers to move
away from the consumer APIs, add a provider API to set the
min/max rate of a clock. The assumption is that this is done
before the clock can be requested via clk_get() and that the
clock rate is already within the boundaries of the min/max that's
configured.

Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: twl6040: Convert to use devm_clk_register

Use devm_clk_register() to simplify the code by removing
twl6040_clk_remove().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: s2mps11: Simplify s2mps11_clk_probe unwind paths

The devm_clk_unregister() in .probe error case is not necessary as it will
be automatically called when probe fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: shmobile: Remove unneeded #include <linux/clkdev.h>

The CCF implementations for the various shmobile SoCs don't use clkdev
functionality, hence drop the inclusion of <linux/clkdev.h>.

Add the missing #include <linux/slab.h>, which was included implicitly
through <asm/clkdev.h> before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ti: Force pointer to be __iomem

Add __force here so that sparse doesn't complain about us playing
tricks with __iomem.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ti: clk-3xxx: Remove unused structures

Sparse complains about these structures missing static, but they
also don't look to be used. Remove them.

drivers/clk/ti/clk-3xxx.c:74:30: warning: symbol 'clkhwops_omap3430es2_ssi_wait' was not declared. Should it be static?
drivers/clk/ti/clk-3xxx.c:157:30: warning: symbol 'clkhwops_omap3430es2_hsotgusb_wait' was not declared. Should it be static?

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ti: Mark ti_clk_features static

This variable isn't exported outside of this file so mark it
static. Silences the following sparse warning:

drivers/clk/ti/clk.c:36:24: warning: symbol 'ti_clk_features' was not declared. Should it be static?

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ti: Check kzalloc() for failures

smatch reports a failure to check kzalloc() here:

drivers/clk/ti/clk.c:232
omap2_clk_provider_init() error: potential null dereference 'io'.
(kzalloc returns null)

Check for an allocation failure and return -ENOMEM.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge branch 'for-4.2/ti-clk-move' of https://github.com/t-kristo/linux-pm into clk-next

From Tero Kristo:
  "This pull request contains the TI clock driver set to move the
   clock implementations under clock driver. Some small portions of
   the clock driver code still remain under mach-omap2 after this,
   it should be decided whether this code is now obsolete and should
   be deleted or should someone try to fix it."

Slight merge conflicts with determine_rate prototype changes.

clk: h8300: Fix signness bug

of_clk_get_parent_count() may return negative error code, so num_parents
needs to be int rather than unsigned int.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: qcom: Set CLK_SET_RATE_PARENT on ce1 clocks

The other ce clocks have the flag set, but ce1 doesn't, so
clk_set_rate() doesn't propagate up the tree to the ce1_src_clk.
Set the flag as this is supported.

Reported-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Fixes: 02824653200b ("clk: qcom: Add APQ8084 Global Clock Controller support")
Fixes: d33faa9ead8d ("clk: qcom: Add support for MSM8974's global clock controller (GCC)")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: gpio: Unlock mutex on error path

We don't unlock the mutex if we fail to allocate the parent names
array. Unlock it and return an error in this case as well.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Cc: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: h8300: Use standard Linux I/O accessors

There doesn't seem to be any reason why we can't use the standard
readb()/writeb() accessors here because ctrl_inb() and
ctrl_outb() match the generic implementation of readb() and
writeb() that the h8300 architecture uses. This allows us to test
compile this driver on other architectures besides h8300.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: h8300: Drop allocation printk and cleanup sizeof style

We don't need to print an error on allocation failures, drop it.
While we're here, change the sizeof() to be sizeof(*<ptr>) to
make code more future proof.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge branch 'clk-determine-rate-struct' into clk-next

* clk-determine-rate-struct:
  clk: fix some determine_rate implementations
  clk: change clk_ops' ->determine_rate() prototype

clk: fix some determine_rate implementations

Some determine_rate implementations are not returning an error
when they failed to adapt the rate according to the rate request.
Fix them so that they return an error instead of silently
returning 0.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: change clk_ops' ->determine_rate() prototype

Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.

Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.

The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: exynos3250: Add cpu clock configuration data and instaniate cpu clock

This patch add CPU clock configuration data and instantiate the CPU
clock type for Exynos3250 to support Samsung specific cpu-clock type.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

clk: exynos5250: add cpu clock configuration data and instantiate cpu clock

With the addition of the new Samsung specific cpu-clock type, the
arm clock can be represented as a cpu-clock type. Add the CPU clock
configuration data and instantiate the CPU clock type for Exynos5250.

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[b.zolnierkie: split exynos5250 support from the original patch]
[b.zolnierkie: moved E5250_CPU_DIV[0,1] macros to clk-exynos5250.c]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

clk: Remove clk.h from clk-provider.h

Remove clk.h from clk-provider.h so that we can clearly split clk
providers from clk consumers. This will allow us to quickly
detect when clock providers are using the consumer APIs by
looking at the includes.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: h8300: Remove clk.h and clkdev.h includes

Neither of these includes are used in these files, remove them.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: at91: Include clk.h and slab.h

This clock provider uses the consumer API, so include clk.h
explicitly. Also include slab.h instead of relying on clkdev.h
for it.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ti: Switch clk-provider.h include to clk.h

This file isn't a clock provider but uses the consumer API, so
include clk.h instead of clk-provider.h.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: pistachio: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ingenic: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: si570: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: moxart: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: cdce925: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: Include clk.h in clk.c

This file implements the clk API and so it should include clk.h
directly instead of indirectly including it through
clk-provider.h.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: zynq: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ti: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: sunxi: Include clk.h and remove unused clkdev.h includes

This clock provider uses the consumer API, so include clk.h
explicitly. Also remove clkdev.h in files that aren't using it
and include slab.h when clkdev.h was being used to implicitly
include it.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: st: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: qcom: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: highbank: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: bcm: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: versatile: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also remove clkdev.h in files that aren't using
it and replace them with slab.h in files that were relying on the
implicit include of slab.h in clkdev.h.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: ux500: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also remove clkdev.h in files that aren't using
it.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: tegra: Properly include clk.h

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h in files that are using
it. Also add in a clkdev.h include that was missing in a file
using clkdev APIs.

Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: spear: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: socfpga: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, remove
it and add in slab.h to make sure things keep compiling.

Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: sirf: Properly include clk.h

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Move the include of clk.h into
clk-common.c because that's the only file that's really using
clk.h, even if it's included into the atlas6 and prima2 files.

Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: samsung: Properly include clk.h and clkdev.h

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h in files that are
using it. The clkdev.h header isn't always used either, so remove
it and add in slab.h where files were relying on it to include
slab for them.

Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: rockchip: Properly include clk.h

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h if it's actually used.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: nxp: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mxs: Include clk.h in C files that use it

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. The clk.h include is being included in all
mxs files because it's part of mxs/clk.h even though nothing
actually requires it in that file. Move the clk.h include to the
C files that are actually using it and remove the clk.h include
from the header file. The clkdev.h include isn't used either, so
drop it too.

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mvebu: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include the header if necessary. The
clkdev.h include isn't used here either, so drop it and add in
slab.h to keep things compiling.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mmp: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, so drop
it and add in slab.h to keep things compiling.

Cc: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: meson8b: Properly include clk.h

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h if it's actually used.

Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mediatek: Properly include clk.h

We don't need to include clk.h in header files, just forward
declare struct clk here. This leads us to a few places where the
include of clk.h was missing in C files. Add them.

Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Henry Chen <henryc.chen@mediatek.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: keystone: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: hisilicon: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also drop the clkdev.h include in files that
aren't using it.

Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: wm831x: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: u300: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also add in slab.h because without clkdev.h
compilation of this file would fail.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: twl6040: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: si5351: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: rk808: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: palmas: Remove clkdev.h includes

This driver includes clkdev.h even though it isn't used, so drop
it.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: nomadik: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. This driver also includes clkdev.h even though
it isn't used, so drop it too and add slab.h to make sure
everything still compiles.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: mux: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: efm32gg: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: clps711x: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: cdce706: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: axi-clkgen: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clk: i.MX: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

lib/vsprintf.c: Include clk.h

This file uses the clk API so it should include clk.h directly
instead of indirectly including it through clk-provider.h.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

simplefb: Include clk.h

This driver uses the consumer API, so include clk.h explicitly
instead of impliclty through the provider API.

Cc: Luc Verhaegen <libv@skynet.be>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

ACPI: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the includes here because these are
a provider drivers.

Cc: Ken Xue <Ken.Xue@amd.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

clocksource: cadence_ttc: Remove clk-provider.h include

This file doesn't use the clk provider APIs. Remove the include.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

spi: spi-pxa2xx: Remove clk.h include

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

staging: clocking-wizard: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

powerpc/512x: clk: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Gerhard Sittig <gsi@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

MIPS: Alchemy: Include clk.h

This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

arm64: Remove clk-provider.h include

This file doesn't use the clk provider APIs. Remove the include.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>