Arnd Bergmann [Thu, 24 Nov 2016 16:30:26 +0000 (17:30 +0100)]
drm/hisilicon/hibmc: mark PM functions __maybe_unused
When CONFIG_PM_SLEEP is disabled, we get a harmless warning
drm/hisilicon/hibmc/hibmc_drm_drv.c:115:12: error: ‘hibmc_pm_resume’ defined but not used [-Werror=unused-function]
drm/hisilicon/hibmc/hibmc_drm_drv.c:97:12: error: ‘hibmc_pm_suspend’ defined but not used [-Werror=unused-function]
Marking the functions as __maybe_unused avoids the warning without
having to add an #ifdef.
drm: bridge: add DesignWare HDMI I2S audio support
Current dw-hdmi is supporting sound via AHB bus, but it has
I2S audio feature too. This patch adds I2S audio support to dw-hdmi.
This HDMI I2S is supported by using ALSA SoC common HDMI encoder
driver.
Chris Wilson [Wed, 23 Nov 2016 14:11:15 +0000 (14:11 +0000)]
drm: Check against color expansion in drm_mm_reserve_node()
Use the color_adjust callback when reserving a node to check if
inserting a node into this hole requires any additional space, and so if
that space then conflicts with an existing allocation.
Chris Wilson [Wed, 23 Nov 2016 14:11:14 +0000 (14:11 +0000)]
drm: Define drm_mm_for_each_node_in_range()
Some clients would like to iterate over every node within a certain
range. Make a nice little macro for them to hide the mixing of the
rbtree search and linear walk.
Arnd Bergmann [Tue, 22 Nov 2016 14:34:19 +0000 (15:34 +0100)]
vgaarb: use valid dev pointer in vgaarb_info()
We now pass the device to the debug messages, but on non-x86,
this is an invalid pointer in vga_arb_device_init:
drivers/gpu/vga/vgaarb.c: In function 'vga_arb_device_init':
drivers/gpu/vga/vgaarb.c:1467:4: error: 'dev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This moves the initialization of the dev pointer outside of the
architecture #ifdef.
Daniel Vetter [Mon, 21 Nov 2016 17:18:02 +0000 (18:18 +0100)]
drm/atomic: Unconfuse the old_state mess in commmit_tail
I totally butcherd the job on typing the kernel-doc for these, and no
one realized. Noticed by Russell. Maarten has a more complete approach
to this confusion, by making it more explicit what the new/old state
is, instead of this magic switching behaviour.
v2:
- Liviu pointed out that wait_for_fences is even more magic. Leave
that as @state, and document @pre_swap better.
- While at it, patch in header for the reference section.
- Fix spelling issues Russell noticed.
v3: Fix up the @pre_swap note (Liviu): Also s/synchronous/blocking/,
since async flip is something else than non-blocking.
Cc: Liviu Dudau <liviu.dudau@arm.com> Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Fixes: 9f2a7950e77a ("drm/atomic-helper: nonblocking commit support") Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161121171802.24147-1-daniel.vetter@ffwll.ch
Liviu Dudau [Thu, 17 Nov 2016 11:41:29 +0000 (11:41 +0000)]
drm/atomic: cleanup debugfs entries on un-registering the driver.
Cleanup the debugfs entries created by
commit 6559c901cb48: drm/atomic: add debugfs file to dump out atomic state
when the driver's minor gets un-registered. Without it, DRM drivers
compiled as modules cannot be rmmod-ed and modprobed again.
Dave Airlie [Mon, 21 Nov 2016 01:42:17 +0000 (11:42 +1000)]
Merge tag 'drm-hisilicon-next-2016-11-17' of http://github.com/zourongrong/linux into drm-next
hibmc drm driver for hisilicon.
* tag 'drm-hisilicon-next-2016-11-17' of http://github.com/zourongrong/linux:
MAINTAINERS: Update HISILICON DRM entries
drm/hisilicon/hibmc: Add support for vblank interrupt
drm/hisilicon/hibmc: Add support for VDAC
drm/hisilicon/hibmc: Add support for display engine
drm/hisilicon/hibmc: Add support for frame buffer
drm/hisilicon/hibmc: Add video memory management
drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver
Bjorn Helgaas [Thu, 17 Nov 2016 17:47:58 +0000 (11:47 -0600)]
vgaarb: Use dev_printk() when possible
Use dev_printk() when possible. This makes messages more consistent with
other device-related messages and, in some cases, adds useful information.
This changes messages like this:
vgaarb: failed to allocate pci device
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: bridge control possible 0000:01:00.0
to this:
pci 0000:01:00.0: vgaarb: failed to allocate VGA arbiter data
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
Daniel Vetter [Thu, 17 Nov 2016 08:56:48 +0000 (09:56 +0100)]
drm: document standard connector properties
There's a really big pile of additional connector properties, a lot of
them standardized. But they're all for specific outputs (panels, TV,
scaling, ...) so I left them out for now since this is enough for a
start.
I typed this to give Manasi a place to add her new link status
property documentation.
v2: forgot to git add all the bits (Manasi).
v3: Be more epxlicit about integrated tiled panels (Archit)
Jani Nikula [Thu, 17 Nov 2016 10:29:08 +0000 (12:29 +0200)]
drm: also move DSI panels to the front of the connector list
We've overlooked adding DSI panels to the front of the connector
list. This seems to be the right thing to do, and I suspect this might
fix some issues, although I currently have no evidence to support this.
Ville Syrjälä [Wed, 16 Nov 2016 11:33:16 +0000 (13:33 +0200)]
drm: Nuke modifier[1-3]
It has been suggested that having per-plane modifiers is making life
more difficult for userspace, so let's just retire modifier[1-3] and
use modifier[0] to apply to the entire framebuffer.
Obviosuly this means that if individual planes need different tiling
layouts and whatnot we will need a new modifier for each combination
of planes with different tiling layouts.
For a bit of extra backwards compatilbilty the kernel will allow
non-zero modifier[1+] but it require that they will match modifier[0].
This in case there's existing userspace out there that sets
modifier[1+] to something non-zero with planar formats.
Mostly a cocci job, with a bit of manual stuff mixed in.
Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net> Cc: dczaplejewicz@collabora.co.uk Suggested-by: Kristian Høgsberg <hoegsberg@gmail.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Acked-by: Daniel Stone <daniels@collabora.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com
Daniel Vetter [Wed, 16 Nov 2016 14:08:18 +0000 (15:08 +0100)]
MAINTAINERS: Move dma-buf to drm-misc git
Sumit still takes care about dma-buf, but we've merged the trees
together since way too much overlap. And Gustavo is also part of the
drm-misc team to be able to help out.
Daniel Vetter [Wed, 16 Nov 2016 14:08:17 +0000 (15:08 +0100)]
MAINTAINERS: Add drm-misc
KS happened, time to make this official!
Well, scripting work to make this all happen is still ongoing, but I'm
trying to at least keep the new tree semi-in-sync with the temporary
topic/drm-misc branch in the drm-intel.git repo. So for now still no
new committers, and existing ones still need to push to topic/drm-misc
in drm-intel.git.
Big kudos to Jani&Sean for volunteering as co-maintainers!
v2: Restrict patterns a bit to avoid all the driver spam.
Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161116140819.31165-1-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 28 Oct 2016 08:10:50 +0000 (10:10 +0200)]
drm: Nerf DRM_CONTROL nodes
Looking at the ioctl permission checks I noticed that it's impossible
to import gem buffers into a control nodes, and fd2handle/handle2fd
also don't work, so no joy with dma-bufs.
The only way to do anything with a control node is by drawing stuff
into a dumb buffer and displaying that. I suspect control nodes are an
entirely unused thing, and a cursory check shows that there does not
seem to be any callers of drmOpenControl nor of the other drmOpen
functions using DRM_MODE_CONTROL.
Since I don't like dead uabi, let's remove it. But since this would be
a really big change I think it's better to start out small by simply
not registering anything. We can garbage-collect the dead code later
on, once we're sure it's really not used anywhere.
Rongrong Zou [Wed, 16 Nov 2016 12:58:51 +0000 (20:58 +0800)]
MAINTAINERS: Update HISILICON DRM entries
Signed-off-by: Rongrong Zou <zourongrong@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Acked-by: Sean Paul <seanpaul@chromium.org>
Rongrong Zou [Wed, 16 Nov 2016 12:57:01 +0000 (20:57 +0800)]
drm/hisilicon/hibmc: Add support for vblank interrupt
Add vblank interrupt.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Acked-by: Sean Paul <seanpaul@chromium.org>
Rongrong Zou [Wed, 16 Nov 2016 12:55:55 +0000 (20:55 +0800)]
drm/hisilicon/hibmc: Add support for VDAC
VDAC(Video Digital-to-Analog converter) converts the RGB diaital data
stream from DE to VGA analog signals.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Acked-by: Sean Paul <seanpaul@chromium.org>
Rongrong Zou [Wed, 16 Nov 2016 12:54:52 +0000 (20:54 +0800)]
drm/hisilicon/hibmc: Add support for display engine
Add display engine function, crtc/plane is initialized here.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Acked-by: Sean Paul <seanpaul@chromium.org>
Rongrong Zou [Wed, 16 Nov 2016 12:52:37 +0000 (20:52 +0800)]
drm/hisilicon/hibmc: Add support for frame buffer
Add support for fbdev and kms fb management.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Acked-by: Sean Paul <seanpaul@chromium.org>
Rongrong Zou [Wed, 16 Nov 2016 13:31:51 +0000 (21:31 +0800)]
drm/hisilicon/hibmc: Add video memory management
Hibmc have 32m video memory which can be accessed through PCIe by host,
we use ttm to manage these memory.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Acked-by: Sean Paul <seanpaul@chromium.org>
Add DRM master driver for Hisilicon Hibmc SoC which used for
Out-of-band management. Blow is the general hardware connection,
both the Hibmc and the host CPU are on the same mother board.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org> Acked-by: Sean Paul <seanpaul@chromium.org>
Dave Airlie [Thu, 17 Nov 2016 00:08:29 +0000 (10:08 +1000)]
Merge branch 'linux-4.10' of git://github.com/skeggsb/linux into drm-next
- GP102/GP104 devinit (suspend/resume, optimus) hang fix
- GP102/GP104 hardware cursor fix
- Fix for a regression on some non-MST monitors that was caused by the
MST work
- Workaround for certain laptops where ACPI sends display hotkey presses
on a modeset, causing gnome-settings-daemon to go into a continuous loop
* 'linux-4.10' of git://github.com/skeggsb/linux:
drm/nouveau/disp/gp102: rename from gp104
drm/nouveau/ce/gp102: rename from gp104
drm/nouveau/fb/gp102: rename from gp104
drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices
drm/nouveau/disp/nv50-: specify ctrl/user separately when constructing classes
drm/nouveau/disp/nv50-: split chid into chid.ctrl and chid.user
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE
drm/nouveau/devinit/gm200: drop pmu reset sequence
drm/nouveau/devinit/gm200: replace while loops with PTIMER-based timeout loops
drm/nouveau/pmu/gp102: initial implementation
drm/nouveau/pmu/gp100: initial implementation
drm/nouveau/pmu: execute reset before running devinit
drm/nouveau/pmu: move ucode handling into gt215 implementation
drm/nouveau/core: initial support for GP102
drm/nouveau/device/pci: fix oops if no mmu subdev present
drm/nouveau/kms/nv50: avoid touching DP_MSTM_CTRL if !DP_MST_CAP
Hans de Goede [Wed, 9 Nov 2016 17:17:44 +0000 (18:17 +0100)]
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE
Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE
acpi-video event when an external device gets plugged in (and again on
modesets on that connector), the default behavior in the acpi-video
driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which
causes e.g. gnome-settings-daemon to ask us to rescan the connectors
(good), but also causes g-s-d to switch to mirror mode on a newly plugged
monitor rather then using the monitor to extend the desktop (bad)
as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop
vs mirror mode.
More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on
changing the mode on the connector, which cause g-s-d to switch
between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE
event and we end up with an endless loop.
This commit fixes this by adding an acpi notifier block handler to
nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and:
1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event()
on them, this is necessary in some cases for the GPU to detect connector
hotplug events while runtime suspended
2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus
KEY_SWITCHVIDEOMODE key-press event
There already is another acpi notifier block handler registered in
drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not
suitable since that one gets unregistered on runtime suspend, and
we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Dave Airlie [Wed, 16 Nov 2016 22:02:46 +0000 (08:02 +1000)]
Merge tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Another pile of misc:
- Explicit fencing for atomic! Big thanks to Gustavo, Sean, Rob 3x, Brian
and anyone else I've forgotten to make this happen.
- roll out fbdev helper ops to drivers (Stefan Christ)
- last bits of drm_crtc split-up&kerneldoc
- some drm_irq.c crtc functions cleanup
- prepare_fb helper for cma, works correctly with explicit fencing (Marek
Vasut)
- misc small patches all over
* tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc: (51 commits)
drm/fence: add out-fences support
drm/fence: add fence timeline to drm_crtc
drm/fence: add in-fences support
drm/bridge: analogix_dp: return error if transfer none byte
drm: drm_irq.h header cleanup
drm/irq: Unexport drm_vblank_on/off
drm/irq: Unexport drm_vblank_count
drm/irq: Make drm_vblank_pre/post_modeset internal
drm/nouveau: Use drm_crtc_vblank_off/on
drm/amdgpu: Use drm_crtc_vblank_on/off for dce6
drm/color: document NULL values and default settings better
drm: Drop externs from drm_crtc.h
drm: Move tile group code into drm_connector.c
drm: Extract drm_mode_config.[hc]
Revert "drm: Add aspect ratio parsing in DRM layer"
Revert "drm: Add and handle new aspect ratios in DRM layer"
drm/print: Move kerneldoc next to definition
drm: Consolidate dumb buffer docs
drm: Clean up kerneldoc for struct drm_driver
drm: Extract drm_drv.h
...
Jonas Pfeil [Mon, 7 Nov 2016 23:18:39 +0000 (00:18 +0100)]
drm/vc4: Add fragment shader threading support
FS threading brings performance improvements of 0-20% in glmark2.
The validation code checks for thread switch signals and ensures that
the registers of the other thread are not touched, and that our clamps
are not live across thread switches. It also checks that the
threading and branching instructions do not interfere.
(Original patch by Jonas, changes by anholt for style cleanup,
removing validation the kernel doesn't need to do, and adding the flag
for userspace).
v2: Minor style fixes from checkpatch.
Signed-off-by: Jonas Pfeil <pfeiljonas@gmx.de> Signed-off-by: Eric Anholt <eric@anholt.net>
Gustavo Padovan [Wed, 16 Nov 2016 13:00:21 +0000 (22:00 +0900)]
drm/fence: add out-fences support
Support DRM out-fences by creating a sync_file with a fence for each CRTC
that sets the OUT_FENCE_PTR property.
We use the out_fence pointer received in the OUT_FENCE_PTR prop to send
the sync_file fd back to userspace.
The sync_file and fd are allocated/created before commit, but the
fd_install operation only happens after we know that commit succeed.
v2: Comment by Rob Clark:
- Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here.
Comment by Daniel Vetter:
- Add clean up code for out_fences
v3: Comments by Daniel Vetter:
- create DRM_MODE_ATOMIC_EVENT_MASK
- userspace should fill out_fences_ptr with the crtc_ids for which
it wants fences back.
v4: Create OUT_FENCE_PTR properties and remove old approach.
v5: Comments by Brian Starkey:
- Remove extra fence_get() in atomic_ioctl()
- Check ret before iterating on the crtc_state
- check ret before fd_install
- set fence_state to NULL at the beginning
- check fence_state->out_fence_ptr before put_user()
- change order of fput() and put_unused_fd() on failure
- Add access_ok() check to the out_fence_ptr received
- Rebase after fence -> dma_fence rename
- Store out_fence_ptr in the drm_atomic_state
- Split crtc_setup_out_fence()
- return -1 as out_fence with TEST_ONLY flag
v6: Comments by Daniel Vetter
- Add prepare/unprepare_crtc_signaling()
- move struct drm_out_fence_state to drm_atomic.c
- mark get_crtc_fence() as static
Comments by Brian Starkey
- proper set fence_ptr fence_state array
- isolate fence_idx increment
- improve error handling
v7: Comments by Daniel Vetter
- remove prefix from internal functions
- make out_fence_ptr an s64 pointer
- degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail
- fix doc issues
- filter out OUT_FENCE_PTR == NULL and do not fail in this case
- add complete_crtc_signalling()
- krealloc fence_state on demand
Comment by Brian Starkey
- remove unused crtc_state arg from get_out_fence()
v8: Comment by Brian Starkey
- cancel events before check for !fence_state
- convert a few lefovers u64 types for out_fence_ptr
- fix memleak by assign fence_state earlier after realloc
- proper accout num_fences in case of error
v9: Comment by Brian Starkey
- memset last position of fence_state after krealloc
Comments by Sean Paul
- pass install_fds in complete_crtc_signaling() instead of ret
- put_user(-1, fence_ptr) when decoding props
v10: Comment by Brian Starkey
- remove unneeded num_fences increment on error path
- kfree fence_state after installing fences fd
v11: rebase against latest drm-misc
v12: rebase again against latest drm-misc
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10) Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> (v10)
[danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
Gustavo Padovan [Tue, 15 Nov 2016 14:37:08 +0000 (23:37 +0900)]
drm/fence: add fence timeline to drm_crtc
Create one timeline context for each CRTC to be able to handle out-fences
and signal them. It adds a few members to struct drm_crtc: fence_context,
where we store the context we get from fence_context_alloc(), the
fence seqno and the fence lock, that we pass in fence_init() to be
used by the fence.
v2: Comment by Daniel Stone:
- add BUG_ON() to fence_to_crtc() macro
v3: Comment by Ville Syrjälä
- Use more meaningful name as crtc timeline name
v4: Comments by Brian Starkey
- Use even more meaninful name for the crtc timeline
- add doc for timeline_name
Comment by Daniel Vetter
- use in-line style for comments
- rebase after fence -> dma_fence rename
v5: Comment by Daniel Vetter
- Add doc for drm_crtc_fence_ops
v6: Comment by Chris Wilson
- Move fence_to_crtc to drm_crtc.c
- Move export of drm_crtc_fence_ops to drm_crtc_internal.h
Gustavo Padovan [Tue, 15 Nov 2016 13:06:39 +0000 (22:06 +0900)]
drm/fence: add in-fences support
There is now a new property called IN_FENCE_FD attached to every plane
state that receives sync_file fds from userspace via the atomic commit
IOCTL.
The fd is then translated to a fence (that may be a fence_array
subclass or just a normal fence) and then used by DRM to fence_wait() for
all fences in the sync_file to signal. So it only commits when all
framebuffers are ready to scanout.
v2: Comments by Daniel Vetter:
- remove set state->fence = NULL in destroy phase
- accept fence -1 as valid and just return 0
- do not call fence_get() - sync_file_fences_get() already calls it
- fence_put() if state->fence is already set, in case userspace
set the property more than once.
v3: WARN_ON if fence is set but state has no FB
v4: Comment from Maarten Lankhorst
- allow set fence with no related fb
v5: rename FENCE_FD to IN_FENCE_FD
v6: Comments by Daniel Vetter:
- rename plane_state->in_fence back to "fence"
- re-introduce WARN_ON if fence set but no fb
- rebase after fence -> dma_fence rename
v7: Comments by Brian Starkey
- set state->fence to NULL when duplicating the state
- fail if IN_FENCE_FD was already set
v8: rebase against latest drm-misc
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com>
[danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jianqun Xu [Wed, 16 Nov 2016 00:13:39 +0000 (08:13 +0800)]
drm/bridge: analogix_dp: return error if transfer none byte
Reference from drm_dp_aux description (about transfer):
Upon success, the implementation should return the number of payload bytes
that were transferred, or a negative error-code on failure. Helpers
propagate errors from the .transfer() function, with the exception of
the -EBUSY error, which causes a transaction to be retried. On a short,
helpers will return -EPROTO to make it simpler to check for failure.
The analogix_dp_transfer will return num_transferred, but if there is none
byte been transferred, the return value will be 0, which means success, we
should return error-code if transfer none byte.
for (retry = 0; retry < 32; retry++) {
err = aux->transfer(aux, &msg);
if (err < 0) {
if (err == -EBUSY)
continue;
Dave Airlie [Tue, 15 Nov 2016 23:39:55 +0000 (09:39 +1000)]
Merge tag 'sunxi-drm-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
sun4i-drm changes for 4.10
Support for the Allwinner A31 SoC display engine using the sun4i-drm
driver.
* tag 'sunxi-drm-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Add a few formats
drm/sun4i: Add compatible strings for A31/A31s display pipelines
drm/sun4i: Add compatible string for A31/A31s TCON (timing controller)
drm/sun4i: tcon: Move SoC specific quirks to a DT matched data structure
drm/sun4i: sun6i-drc: Support DRC on A31 and A31s
Daniel Vetter [Mon, 14 Nov 2016 09:02:53 +0000 (10:02 +0100)]
drm/irq: Unexport drm_vblank_count
No one outside of drm_irq.c should ever need this. The correct way to
implement get_vblank_count for hw lacking a vblank counter is
drm_vblank_no_hw_counter. Fix this up in mtk, which is the only
offender left over.
Daniel Vetter [Mon, 14 Nov 2016 09:02:52 +0000 (10:02 +0100)]
drm/irq: Make drm_vblank_pre/post_modeset internal
Now that all drivers are switched over to drm_crtc_vblank_on/off we
can relegate pre/post_modeset to the purely drm_irq.c internal role of
supporting old ums userspace.
As usual switch to the drm_legacy_ prefix to make it clear this is
for old drivers only.
v2: Rebase on top of Thierry's s/int crtc/unsigned int pipe/ changes.
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 15 Nov 2016 21:58:19 +0000 (22:58 +0100)]
drm/nouveau: Use drm_crtc_vblank_off/on
With atomic nv50+ is already converted over to them, but the old
display code is still using it. Found in a 2 year old patch I have
lying around to un-export these old helpers!
v2: Drop the hand-rolled versions from resume/suspend code. Now that
crtc callbacks do this, we don't need a special case for s/r anymore.
v3: Remove unused variables.
v4: Don't remove drm_crtc_vblank_off from suspend paths, non-atomic
nouveau still needs that. But still switch to drm_crtc_vblank_off
since drm_vblank_off will disappear.
Daniel Vetter [Mon, 14 Nov 2016 09:02:50 +0000 (10:02 +0100)]
drm/amdgpu: Use drm_crtc_vblank_on/off for dce6
This old code pattern was reintroduced in
Author: Ken Wang <Qingqing.Wang@amd.com>
Date: Tue Jan 19 14:03:24 2016 +0800
drm/amdgpu: add display controller implementation for si v10
Realign it with later display code. Tsk, tsk for massive copypasting
;-)
Cc: Christian König <christian.koenig@amd.com> Cc: Ken Wang <Qingqing.Wang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> for the whole series. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-1-daniel.vetter@ffwll.ch
Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).
This also broke things so that we would always send out VIC==0 in
the AVI infoframe unless the user specified an aspect ratio via
the mode flags. And the automagic RGB full vs. limited range
handling was similartly broken as the user mode would never match
any CEA mode.
Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Lin, Jia <lin.a.jia@intel.com> Cc: Akashdeep Sharma <akashdeep.sharma@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-2-git-send-email-ville.syrjala@linux.intel.com
Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).
Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Lin, Jia <lin.a.jia@intel.com> Cc: Akashdeep Sharma <akashdeep.sharma@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-1-git-send-email-ville.syrjala@linux.intel.com
Daniel Vetter [Mon, 14 Nov 2016 11:58:19 +0000 (12:58 +0100)]
drm: Extract drm_drv.h
I want to move dumb buffer documentation into the right vfuncs, and
for that I first need to be able to pull that into kerneldoc without
having to clean up all of drmP.h. Also, header-splitting is nice.
While at it shuffle all the function declarations for drm_drv.c into
the right spots, and drop the kerneldoc for drm_minor_acquire/release
since it's only used internally.
v2: Keep all existing copyright notices (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Mon, 14 Nov 2016 11:58:18 +0000 (12:58 +0100)]
doc/dma-buf: Fix up include directives
Would be great if everony could add
$ make DOCBOOKS="" htmldocs
to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.
Fixes: f54d1867005c ("dma-buf: Rename struct fence to dma_fence") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-4-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 14 Nov 2016 11:58:17 +0000 (12:58 +0100)]
drm/i915: Fixup kerneldoc includes
Would be great if everony could add
$ make DOCBOOKS="" htmldocs
to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.
Fixes: b42fe9ca0a1e ("drm/i915: Split out i915_vma.c") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-3-daniel.vetter@ffwll.ch
Add missing forward declaration for struct drm_plane and drm_plane_state,
which causes the following warning in the VC4 driver (can be replicated
by building using bcm2835_defconfig):
In file included from drivers/gpu/drm/vc4/vc4_drv.c:18:0:
include/drm/drm_fb_cma_helper.h:45:13: warning: ‘struct drm_plane_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_plane_state *state);
^~~~~~~~~~~~~~~
include/drm/drm_fb_cma_helper.h:44:34: warning: ‘struct drm_plane’ declared inside parameter list will not be visible outside of this definition or declaration
int drm_fb_cma_prepare_fb(struct drm_plane *plane,
Really the only reason for crtc_ww_class not being internal to
drm_modeset_lock.c is that drm_modeset_lock_init() was static-inline
(for no particularly good reason).
Fix that, and move crtc_ww_class into drm_modeset_lock.c.
This is fixed by using the kref_get_unless_zero() as a full memory
barrier to validate the fence is still the current exclusive fence before
returning it back to the caller. (Note the fix only requires using
dma_fence_get_rcu() and correct handling, but we may as well use the
helper rather than inline equivalent code.)
Note: Issue can only be hit with the i915 driver.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org Fixes: d07f0e59b2c7 ("drm/i915: Move GEM activity tracking into a common struct reservation_object") Reviewed-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161114115540.31155-1-chris@chris-wilson.co.uk
Koji Matsuoka [Mon, 16 May 2016 02:28:15 +0000 (11:28 +0900)]
drm: rcar-du: Fix H/V sync signal polarity configuration
The VSL and HSL bits in the DSMR register set the corresponding
horizontal and vertical sync signal polarity to active high. The code
got it the wrong way around, fix it.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
There is a bug in the setting of the DES (Display Enable Signal)
register. This current setting occurs 1 dot left shift. The DES
register should be set minus one value about the specifying value
with H/W specification. This patch corrects it.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 22 Oct 2016 16:05:53 +0000 (19:05 +0300)]
drm: rcar-du: Fix dot clock routing configuration
Dot clock routing is setup through different registers depending on the
DU generation. The code has been designed for Gen2 and hasn't been
updated since. This works thanks to good reset default value, but isn't
very safe. Fix it.
Laurent Pinchart [Tue, 18 Oct 2016 21:51:35 +0000 (00:51 +0300)]
drm: rcar-du: Simplify and fix probe error handling
It isn't safe to call drm_dev_unregister() without first initializing
mode setting with drm_mode_config_init(). This leads to a crash if
either IO memory can't be remapped or vblank initialization fails.
Fix this by reordering the initialization sequence. Move vblank
initialization after the drm_mode_config_init() call, and move IO
remapping before drm_dev_alloc() to avoid the need to perform clean up
in case of failure.
While at it remove the explicit drm_vblank_cleanup() call from
rcar_du_remove() as the drm_dev_unregister() function already cleans up
vblank.
Add new drm_fb_cma_prepare_fb() helper function extracted from the
imx-drm driver. This function checks if the plane has DMABUF attached
to it, extracts the exclusive fence from it and attaches it to the
plane state for the atomic helper to wait on it.
projects / karo-tx-linux.git / log