Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
Use ll/sc loops instead of C loops around cmpxchg.
Update the atomic64_add_unless block comment to match the code.
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
Remove the compile warning for __udiv_qrnnd not having a prototype.
Use the __builtin_alpha_umulh introduced in gcc 4.0.
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
The arch_{spin,read,write}_relax macros are not used anywhere in the
kernel and are typically just aliases for cpu_relax().
This patch removes the unused definitions for Alpha.
Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fix from Paolo Bonzini:
"This single patch fixes a regression caused by one of the
optimizations introduced in 3.11, which is generally visible only on
AMD processors"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MMU: avoid fast page fault fixing mmio page fault
Merge tag 'pm+acpi-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are fixes collected over the last week, most importnatly two
cpufreq reverts fixing regressions introduced in 3.10, an autoseelp
fix preventing systems using it from crashing during shutdown and two
ACPI scan fixes related to hotplug.
Specifics:
- Two cpufreq commits from the 3.10 cycle introduced regressions.
The first of them was buggy (it did way much more than it needed to
do) and the second one attempted to fix an issue introduced by the
first one. Fixes from Srivatsa S Bhat revert both.
- If autosleep triggers during system shutdown and the shutdown
callbacks of some device drivers have been called already, it may
crash the system. Fix from Liu Shuo prevents that from happening
by making try_to_suspend() check system_state.
- The ACPI memory hotplug driver doesn't clear its driver_data on
errors which may cause a NULL poiter dereference to happen later.
Fix from Toshi Kani.
- The ACPI namespace scanning code should not try to attach scan
handlers to device objects that have them already, which may
confuse things quite a bit, and it should rescan the whole
namespace branch starting at the given node after receiving a bus
check notify event even if the device at that particular node has
been discovered already. Fixes from Rafael J Wysocki.
- New ACPI video blacklist entry for a system whose initial backlight
setting from the BIOS doesn't make sense. From Lan Tianyu.
- Garbage string output avoindance for ACPI PNP from Liu Shuo.
- Two Kconfig fixes for issues introduced recently in the s3c24xx
cpufreq driver (when moving the driver to drivers/cpufreq) from
Paul Bolle.
- Trivial comment fix in pm_wakeup.h from Chanwoo Choi"
* tag 'pm+acpi-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: ignore BIOS initial backlight value for Fujitsu E753
PNP / ACPI: avoid garbage in resource name
cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regression
cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in Kconfig
cpufreq: s3c24xx: rename CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
PM / Sleep: Fix comment typo in pm_wakeup.h
PM / Sleep: avoid 'autosleep' in shutdown progress
cpufreq: Revert commit a66b2e to fix suspend/resume regression
ACPI / memhotplug: Fix a stale pointer in error path
ACPI / scan: Always call acpi_bus_scan() for bus check notifications
ACPI / scan: Do not try to attach scan handlers to devices having them
Pull networking fixes from David Miller:
"A couple interesting SKB fragment handling fixes, plus the usual small
bits here and there:
1) Fix 64-bit divide build failure on 32-bit platforms in mlx5, from
Tim Gardner.
2) Get rid of a stupid reimplementation on "%*phC" in our sysfs MAC
address printing helper.
3) Fix NETIF_F_SG capability advertisement in hyperv driver, if the
device can't do checksumming offloads then it shouldn't say it can
do SG either. From Haiyang Zhang.
4) bgmac needs to depend on PHYLIB, from Hauke Mehrtens.
5) Don't leak DMA mappings on mapping failures, from Neil Horman.
6) We need to reset the transport header of SKBs in ipv4 before we
attempt to perform early socket demux, just like ipv6 does. From
Eric Dumazet.
7) Add missing locking on vxlan device removal, from Stephen
Hemminger.
8) xen-netfront has to make two passes over an SKB to prepare it for
transfer. One pass calculates the number of slots needed, the
second massages the SKB and fills the slots. Unfortunately, the
first pass doesn't calculate the number of slots properly so we
can end up trying to build a MAX_SKB_FRAGS + 1 SKB which doesn't
work out so well. Fix from Jan Beulich with help and discussion
with several others.
9) Fix a similar problem in tun and macvtap, which have to split up
scatter-gather elements at PAGE_SIZE boundaries. Don't do
zerocopy if it would result in a > MAX_SKB_FRAGS skb. Fixes from
Jason Wang.
10) On receive, once we've decoded the VLAN state completely, clear
skb->vlan_tci. Otherwise demuxed tunnels underneath can trigger
the VLAN code again, corrupting the packet. Fix from Eric
Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
vlan: fix a race in egress prio management
vlan: mask vlan prio bits
macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
pkt_sched: sch_qfq: remove a source of high packet delay/jitter
xen-netfront: pull on receive skb may need to happen earlier
vxlan: add necessary locking on device removal
hyperv: Fix the NETIF_F_SG flag setting in netvsc
net: Fix sysfs_format_mac() code duplication.
be2net: Fix to avoid hardware workaround when not needed
macvtap: do not assume 802.1Q when send vlan packets
macvtap: fix the missing ret value of TUNSETQUEUE
ipv4: set transport header earlier
mlx5 core: Fix __udivdi3 when compiling for 32 bit arches
bgmac: add dependency to phylib
net/irda: fixed style issues in irlan_eth
ethtool: fixed trailing statements in ethtool
ndisc: bool initializations should use true and false
atl1e: unmap partially mapped skb on dma error and free skb
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"Trying again to get the fixes queue, including the fixed IDT alignment
patch.
The UEFI patch is by far the biggest issue at hand: it is currently
causing quite a few machines to boot. Which is sad, because the only
reason they would is because their BIOSes touch memory that has
already been freed. The other major issue is that we finally have
tracked down the root cause of a significant number of machines
failing to suspend/resume"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Make sure IDT is page aligned
x86, suspend: Handle CPUs which fail to #GP on RDMSR
x86/platform/ce4100: Add header file for reboot type
Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()"
efivars: check for EFI_RUNTIME_SERVICES
Merge tag 'md-3.11-fixes' of git://neil.brown.name/md
Pull md bug fixes from NeilBrown:
"Sorry boss, back at work now boss. Here's them nice shiny patches ya
wanted. All nicely tagged and justified for -stable and everyfing:
Three bug fixes for md in 3.10
3.10 wasn't a good release for md. The bio changes left a couple of
bugs, and an md "fix" created another one.
These three patches appear to fix the issues and have been tagged for
-stable"
* tag 'md-3.11-fixes' of git://neil.brown.name/md:
md/raid1: fix bio handling problems in process_checks()
md: Remove recent change which allows devices to skip recovery.
md/raid10: fix two problems with RAID10 resync.
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"You'll be terribly disappointed in this, I'm not trying to sneak any
features in or anything, its mostly radeon and intel fixes, a couple
of ARM driver fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits)
drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
drm/radeon/dpm/atom: fix broken gcc harder
drm/radeon/dpm/atom: restructure logic to work around a compiler bug
drm/radeon/dpm: fix atom vram table parsing
drm/radeon: fix an endian bug in atom table parsing
drm/radeon: add a module parameter to disable aspm
drm/rcar-du: Use the GEM PRIME helpers
drm/shmobile: Use the GEM PRIME helpers
uvesafb: Really allow mtrr being 0, as documented and warn()ed
radeon kms: do not flush uninitialized hotplug work
drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level
drm/radeon: align VM PTBs (Page Table Blocks) to 32K
drm/radeon: allow selection of alignment in the sub-allocator
drm/radeon: never unpin UVD bo v3
drm/radeon: fix UVD fence emit
drm/radeon: add fault decode function for CIK
drm/radeon: add fault decode function for SI (v2)
drm/radeon: add fault decode function for cayman/TN (v2)
drm/radeon: use radeon device for request firmware
drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate
...
Eric Dumazet [Thu, 18 Jul 2013 16:35:10 +0000 (09:35 -0700)]
vlan: fix a race in egress prio management
egress_priority_map[] hash table updates are protected by rtnl,
and we never remove elements until device is dismantled.
We have to make sure that before inserting an new element in hash table,
all its fields are committed to memory or else another cpu could
find corrupt values and crash.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 18 Jul 2013 14:19:26 +0000 (07:19 -0700)]
vlan: mask vlan prio bits
In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e
("vlan: don't deliver frames for unknown vlans to protocols")
Florian made sure we set pkt_type to PACKET_OTHERHOST
if the vlan id is set and we could find a vlan device for this
particular id.
But we also have a problem if prio bits are set.
Steinar reported an issue on a router receiving IPv6 frames with a
vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device,
because skb->vlan_tci is set.
Forwarded frame is completely corrupted : We can see (8100:4000)
being inserted in the middle of IPv6 source address :
It seems we are not really ready to properly cope with this right now.
We can probably do better in future kernels :
vlan_get_ingress_priority() should be a netdev property instead of
a per vlan_dev one.
For stable kernels, lets clear vlan_tci to fix the bugs.
Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 18 Jul 2013 02:55:16 +0000 (10:55 +0800)]
macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.
Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.
This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.
Jason Wang [Thu, 18 Jul 2013 02:55:15 +0000 (10:55 +0800)]
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.
Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.
This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.
Paolo Valente [Tue, 16 Jul 2013 06:52:30 +0000 (08:52 +0200)]
pkt_sched: sch_qfq: remove a source of high packet delay/jitter
QFQ+ inherits from QFQ a design choice that may cause a high packet
delay/jitter and a severe short-term unfairness. As QFQ, QFQ+ uses a
special quantity, the system virtual time, to track the service
provided by the ideal system it approximates. When a packet is
dequeued, this quantity must be incremented by the size of the packet,
divided by the sum of the weights of the aggregates waiting to be
served. Tracking this sum correctly is a non-trivial task, because, to
preserve tight service guarantees, the decrement of this sum must be
delayed in a special way [1]: this sum can be decremented only after
that its value would decrease also in the ideal system approximated by
QFQ+. For efficiency, QFQ+ keeps track only of the 'instantaneous'
weight sum, increased and decreased immediately as the weight of an
aggregate changes, and as an aggregate is created or destroyed (which,
in its turn, happens as a consequence of some class being
created/destroyed/changed). However, to avoid the problems caused to
service guarantees by these immediate decreases, QFQ+ increments the
system virtual time using the maximum value allowed for the weight
sum, 2^10, in place of the dynamic, instantaneous value. The
instantaneous value of the weight sum is used only to check whether a
request of weight increase or a class creation can be satisfied.
Unfortunately, the problems caused by this choice are worse than the
temporary degradation of the service guarantees that may occur, when a
class is changed or destroyed, if the instantaneous value of the
weight sum was used to update the system virtual time. In fact, the
fraction of the link bandwidth guaranteed by QFQ+ to each aggregate is
equal to the ratio between the weight of the aggregate and the sum of
the weights of the competing aggregates. The packet delay guaranteed
to the aggregate is instead inversely proportional to the guaranteed
bandwidth. By using the maximum possible value, and not the actual
value of the weight sum, QFQ+ provides each aggregate with the worst
possible service guarantees, and not with service guarantees related
to the actual set of competing aggregates. To see the consequences of
this fact, consider the following simple example.
Suppose that only the following aggregates are backlogged, i.e., that
only the classes in the following aggregates have packets to transmit:
one aggregate with weight 10, say A, and ten aggregates with weight 1,
say B1, B2, ..., B10. In particular, suppose that these aggregates are
always backlogged. Given the weight distribution, the smoothest and
fairest service order would be:
A B1 A B2 A B3 A B4 A B5 A B6 A B7 A B8 A B9 A B10 A B1 A B2 ...
QFQ+ would provide exactly this optimal service if it used the actual
value for the weight sum instead of the maximum possible value, i.e.,
11 instead of 2^10. In contrast, since QFQ+ uses the latter value, it
serves aggregates as follows (easy to prove and to reproduce
experimentally):
A B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 A A A A A A A A A A B1 B2 ... B10 A A ...
By replacing 10 with N in the above example, and by increasing N, one
can increase at will the maximum packet delay and the jitter
experienced by the classes in aggregate A.
This patch addresses this issue by just using the above
'instantaneous' value of the weight sum, instead of the maximum
possible value, when updating the system virtual time. After the
instantaneous weight sum is decreased, QFQ+ may deviate from the ideal
service for a time interval in the order of the time to serve one
maximum-size packet for each backlogged class. The worst-case extent
of the deviation exhibited by QFQ+ during this time interval [1] is
basically the same as of the deviation described above (but, without
this patch, QFQ+ suffers from such a deviation all the time). Finally,
this patch modifies the comment to the function qfq_slot_insert, to
make it coherent with the fact that the weight sum used by QFQ+ can
now be lower than the maximum possible value.
[1] P. Valente, "Extending WF2Q+ to support a dynamic traffic mix",
Proceedings of AAA-IDEA'05, June 2005.
Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg KH:
"Here are some driver core patches for 3.11-rc2. They aren't really
bugfixes, but a bunch of new helper macros for drivers to properly
create attribute groups, which drivers and subsystems need to fix up a
ton of race issues with incorrectly creating sysfs files (binary and
normal) after userspace has been told that the device is present.
Also here is the ability to create binary files as attribute groups,
to solve that race condition, which was impossible to do before this,
so that's my fault the drivers were broken.
The majority of the .c changes is indenting and moving code around a
bit. It affects no existing code, but allows the large backlog of 70+
patches that I already have created to start flowing into the
different subtrees, instead of having to live in my driver-core tree,
causing merge nightmares in linux-next for the next few months.
These were finalized too late for the -rc1 merge window, which is why
they were didn't make that pull request, testing and review from
others didn't happen until a few weeks ago, and then there's the whole
distraction of the past few days, which prevented these from getting
to you sooner, sorry about that.
Oh, and there's a bugfix for the documentation build warning in here
as well. All of these have been in linux-next this week, with no
reported problems"
* tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver-core: fix new kernel-doc warning in base/platform.c
sysfs: use file mode defines from stat.h
sysfs: add more helper macro's for (bin_)attribute(_groups)
driver core: add default groups to struct class
driver core: Introduce device_create_groups
sysfs: prevent warning when only using binary attributes
sysfs: add support for binary attributes in groups
driver core: device.h: add RW and RO attribute macros
sysfs.h: add BIN_ATTR macro
sysfs.h: add ATTRIBUTE_GROUPS() macro
sysfs.h: add __ATTR_RW() macro
* acpi-fixes:
ACPI / video: ignore BIOS initial backlight value for Fujitsu E753
PNP / ACPI: avoid garbage in resource name
ACPI / memhotplug: Fix a stale pointer in error path
ACPI / scan: Always call acpi_bus_scan() for bus check notifications
ACPI / scan: Do not try to attach scan handlers to devices having them
Lan Tianyu [Tue, 16 Jul 2013 02:07:21 +0000 (10:07 +0800)]
ACPI / video: ignore BIOS initial backlight value for Fujitsu E753
The BIOS of FUjitsu E753 reports an incorrect initial backlight value
for WIN8 compatible OS, causing backlight to be dark during startup.
This change causes the incorrect initial value from BIOS to be ignored.
References: https://bugzilla.kernel.org/show_bug.cgi?id=60161 Reported-and-tested-by: Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge branch 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull phase two of __cpuinit removal from Paul Gortmaker:
"With the __cpuinit infrastructure removed earlier, this group of
commits only removes the function/data tagging that was done with the
various (now no-op) __cpuinit related prefixes.
Now that the dust has settled with yesterday's v3.11-rc1, there
hopefully shouldn't be any new users leaking back in tree, but I think
we can leave the harmless no-op stubs there for a release as a
courtesy to those who still have out of tree stuff and weren't paying
attention.
Although the commits are against the recent tag to allow for minor
context refreshes for things like yesterday's v3.11-rc1~ slab content,
the patches have been largely unchanged for weeks, aside from such
trivial updates.
For detail junkies, the largely boring and mostly irrelevant history
of the patches can be viewed at:
If nothing else, I guess it does at least demonstrate the level of
involvement required to shepherd such a treewide change to completion.
This is the same repository of patches that has been applied to the
end of the daily linux-next branches for the past several weeks"
* 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits)
block: delete __cpuinit usage from all block files
drivers: delete __cpuinit usage from all remaining drivers files
kernel: delete __cpuinit usage from all core kernel files
rcu: delete __cpuinit usage from all rcu files
net: delete __cpuinit usage from all net files
acpi: delete __cpuinit usage from all acpi files
hwmon: delete __cpuinit usage from all hwmon files
cpufreq: delete __cpuinit usage from all cpufreq files
clocksource+irqchip: delete __cpuinit usage from all related files
x86: delete __cpuinit usage from all x86 files
score: delete __cpuinit usage from all score files
xtensa: delete __cpuinit usage from all xtensa files
openrisc: delete __cpuinit usage from all openrisc files
m32r: delete __cpuinit usage from all m32r files
hexagon: delete __cpuinit usage from all hexagon files
frv: delete __cpuinit usage from all frv files
cris: delete __cpuinit usage from all cris files
metag: delete __cpuinit usage from all metag files
tile: delete __cpuinit usage from all tile files
sh: delete __cpuinit usage from all sh files
...
Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Except for a slightly big OMAP changes, all rest are small, mostly
boring changes; all either 3.11 regression fixes or stable materials.
- ASoC OMAP fixes due to non-DT OMAP4 removals
- Other ASoC driver changes (sglt5000, wm8978, wm8948, samsung)
- Fix missing locking for snd_pcm_stop() calls in many drivers
- Fix the blocking request_module() in OSS sequencer
- Fix old OSS vwsnd driver builds
- Add a new HD-audio HDMI codec ID"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: seq-oss: Initialize MIDI clients asynchronously
ALSA: hda - Add new GPU codec ID to snd-hda
staging: line6: Fix unlocked snd_pcm_stop() call
[media] saa7134: Fix unlocked snd_pcm_stop() call
ASoC: s6000: Fix unlocked snd_pcm_stop() call
ASoC: atmel: Fix unlocked snd_pcm_stop() call
ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call
ALSA: usx2y: Fix unlocked snd_pcm_stop() call
ALSA: ua101: Fix unlocked snd_pcm_stop() call
ALSA: 6fire: Fix unlocked snd_pcm_stop() call
ALSA: atiixp: Fix unlocked snd_pcm_stop() call
ALSA: asihpi: Fix unlocked snd_pcm_stop() call
sound: oss/vwsnd: Always define vwsnd_mutex
sound: oss/vwsnd: Add missing inclusion of linux/delay.h
ASoC: wm8978: enable symmetric rates
ASoC: omap-mcbsp: Use different method for DMA request when booted with DT
ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMA
ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMA
ASoC: omap-pcm: Request the DMA channel differently when DT is involved
ASoC: Samsung: Set RFS and BFS in slave mode
...
KVM: MMU: avoid fast page fault fixing mmio page fault
Currently, fast page fault incorrectly tries to fix mmio page fault when
the generation number is invalid (spte.gen != kvm.gen). It then returns
to guest to retry the fault since it sees the last spte is nonpresent.
This causes an infinite loop.
Since fast page fault only works for direct mmu, the issue exists when
1) tdp is enabled. It is only triggered only on AMD host since on Intel host
the mmio page fault is recognized as ept-misconfig whose handler call
fault-page path with error_code = 0
2) guest paging is disabled. Under this case, the issue is hardly discovered
since paging disable is short-lived and the sptes will be invalid after
memslot changed for 150 times
Fix it by filtering out MMIO page faults in page_fault_can_be_fast.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
md/raid1: fix bio handling problems in process_checks()
Recent change to use bio_copy_data() in raid1 when repairing
an array is faulty.
The underlying may have changed the bio in various ways using
bio_advance and these need to be undone not just for the 'sbio' which
is being copied to, but also the 'pbio' (primary) which is being
copied from.
So perform the reset on all bios that were read from and do it early.
This also ensure that the sbio->bi_io_vec[j].bv_len passed to
memcmp is correct.
This fixes a crash during a 'check' of a RAID1 array. The crash was
introduced in 3.10 so this is suitable for 3.10-stable.
Cc: stable@vger.kernel.org (3.10) Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de>
allowed a bit more than just that. It also allows devices to be added
to a read-write array and to end up skipping recovery.
This patch removes the offending piece of code pending a rewrite for a
subsequent release.
More specifically:
If the array has a bitmap, then the device will still need a bitmap
based resync ('saved_raid_disk' is set under different conditions
is a bitmap is present).
If the array doesn't have a bitmap, then this is correct as long as
nothing has been written to the array since the metadata was checked
by ->validate_super. However there is no locking to ensure that there
was no write.
Bug was introduced in 3.10 and causes data corruption so
patch is suitable for 3.10-stable.
Cc: stable@vger.kernel.org (3.10) Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de>
1/ When an different between blocks is found, data is copied from
one bio to the other. However bv_len is used as the length to
copy and this could be zero. So use r10_bio->sectors to calculate
length instead.
Using bv_len was probably always a bit dubious, but the introduction
of bio_advance made it much more likely to be a problem.
2/ When preparing some blocks for sync, we don't set BIO_UPTODATE
except on bios that we schedule for a read. This ensures that
missing/failed devices don't confuse the loop at the top of
sync_request write.
Commit 8be185f2c9d54d6 "raid10: Use bio_reset()"
removed a loop which set BIO_UPTDATE on all appropriate bios.
So we need to re-add that flag.
These bugs were introduced in 3.10, so this patch is suitable for
3.10-stable, and can remove a potential for data corruption.
Cc: stable@vger.kernel.org (3.10) Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
Dave Airlie [Thu, 18 Jul 2013 00:19:46 +0000 (10:19 +1000)]
Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux
more DPM fixes for radeon.
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
drm/radeon/dpm/atom: fix broken gcc harder
drm/radeon/dpm/atom: restructure logic to work around a compiler bug
drm/radeon/dpm: fix atom vram table parsing
drm/radeon: fix an endian bug in atom table parsing
drm/radeon: add a module parameter to disable aspm
Alex Deucher [Tue, 2 Jul 2013 17:05:23 +0000 (13:05 -0400)]
drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
This allows you to look at the current DPM state via
debugfs.
Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.
v2: Anthoine's version
v3: fix ref div
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
"Just three minor bugfixes"
* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
svcrdma: underflow issue in decode_write_list()
nfsd4: fix minorversion support interface
lockd: protect nlm_blocked access in nlmsvc_retry_blocked
Alex Deucher [Wed, 17 Jul 2013 20:34:12 +0000 (16:34 -0400)]
drm/radeon/dpm/atom: fix broken gcc harder
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jan Beulich [Wed, 17 Jul 2013 07:09:37 +0000 (08:09 +0100)]
xen-netfront: pull on receive skb may need to happen earlier
Due to commit 3683243b ("xen-netfront: use __pskb_pull_tail to ensure
linear area is big enough on RX") xennet_fill_frags() may end up
filling MAX_SKB_FRAGS + 1 fragments in a receive skb, and only reduce
the fragment count subsequently via __pskb_pull_tail(). That's a
result of xennet_get_responses() allowing a maximum of one more slot to
be consumed (and intermediately transformed into a fragment) if the
head slot has a size less than or equal to RX_COPY_THRESHOLD.
Hence we need to adjust xennet_fill_frags() to pull earlier if we
reached the maximum fragment count - due to the described behavior of
xennet_get_responses() this guarantees that at least the first fragment
will get completely consumed, and hence the fragment count reduced.
In order to not needlessly call __pskb_pull_tail() twice, make the
original call conditional upon the pull target not having been reached
yet, and defer the newly added one as much as possible (an alternative
would have been to always call the function right before the call to
xennet_fill_frags(), but that would imply more frequent cases of
needing to call it twice).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: stable@vger.kernel.org (3.6 onwards) Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The socket management is now done in workqueue (outside of RTNL)
and protected by vn->sock_lock. There were two possible bugs, first
the vxlan device was removed from the VNI hash table per socket without
holding lock. And there was a race when device is created and the workqueue
could run after deletion.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The GEM CMA PRIME import/export helpers have been removed in favor of
generic GEM PRIME helpers with GEM CMA low-level operations. Fix the
driver accordingly.
Reported-by: Mark Brown <broonie@linaro.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Mark Brown <broonie@linaro.org>
The GEM CMA PRIME import/export helpers have been removed in favor of
generic GEM PRIME helpers with GEM CMA low-level operations. Fix the
driver accordingly.
Reported-by: Mark Brown <broonie@linaro.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Mark Brown <broonie@linaro.org>
We've got bug reports that the module loading stuck on Debian system
with 3.10 kernel. The debugging session revealed that the initial
registration of OSS sequencer clients stuck at module loading time,
which involves again with request_module() at the init phase. This is
triggered only by special --install stuff Debian is using, but it's
still not good to have such loops.
As a workaround, call the registration part asynchronously. This is a
better approach irrespective of the hang fix, in anyway.
SG mode is not currently supported by netvsc, so remove this flag for now.
Otherwise, it will be unconditionally enabled by commit ec5f0615642
"Kill link between CSUM and SG features"
Previously, the SG feature is disabled because CSUM is not set here.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Jones [Wed, 17 Jul 2013 02:44:08 +0000 (22:44 -0400)]
linked-list: Remove __list_for_each
__list_for_each used to be the non prefetch() aware list walking
primitive. When we removed the prefetch macros from the list routines,
it became redundant. Given it does exactly the same thing as
list_for_each now, we might as well remove it and call list_for_each
directly.
All users of __list_for_each have been converted to list_for_each calls
in the current merge window.
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Wed, 17 Jul 2013 00:09:15 +0000 (17:09 -0700)]
net: Fix sysfs_format_mac() code duplication.
It's just a duplicate implementation of "%*phC". Thanks to Joe
Perches for showing that we had exactly this support in the
lib/vsprintf.c code already.
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Tue, 16 Jul 2013 22:40:49 +0000 (08:40 +1000)]
Merge tag 'drm-intel-fixes-2013-07-11' of git://people.freedesktop.org/~danvet/drm-intel
One feature latecomer, I've forgotten to merge the patch to reeanble the
Haswell power well feature now that the audio interaction is fixed up.
Since that was the only unfixed issue with it I've figured I could throw
it in a bit late, and it's trivial to revert in case I'm wrong.
Otherwise all bug/regression fixes:
- Fix status page reinit after gpu hangs, spotted by more paranoid igt
checks.
- Fix object list walking fumble regression in the shrinker (only the
counting part, the actual shrinking code was correct so no Oops
potential), from Xiong Zhang.
- Fix DP 1.2 bw limits (Imre).
- Restore legacy forcewake on ivb, too many broken biosen out there. We
dump a warn though that recent userspace might fall over with that
config (Guenter Roeck).
- Patch up the gen2 cs tlb w/a.
- Improve the fence coherency w/a now that we have a better understanding
what's going on. The removed wbinvd+ipi should make -rt folks happy. Big
thanks to Jon Bloomfield for figuring this out, patches from Chris.
- Fix write-read race when switching ring (Chris). Spotted with code
inspection, but now we also have an igt for it.
There's an ugly regression we're still working on introduced between
3.10-rc7 and 3.10.0. Unfortunately we can't just revert the offender since
that one fixes another regression :( I've asked Steven to include my
-fixes branch into linux-next to prevent such fallout in the future,
hopefully.
* tag 'drm-intel-fixes-2013-07-11' of git://people.freedesktop.org/~danvet/drm-intel:
Revert "drm/i915: Workaround incoherence between fences and LLC across multiple CPUs"
drm/i915: Fix incoherence with fence updates on Sandybridge+
drm/i915: Fix write-read race with multiple rings
Partially revert "drm/i915: unconditionally use mt forcewake on hsw/ivb"
drm/i915: fix lane bandwidth capping for DP 1.2 sinks
drm/i915: fix up ring cleanup for the i830/i845 CS tlb w/a
drm/i915: Correct obj->mm_list link to dev_priv->dev_priv->mm.inactive_list
drm/i915: switch disable_power_well default value to 1
drm/i915: reinit status page registers after gpu reset
Since the IDT is referenced from a fixmap, make sure it is page aligned.
Merge with 32-bit one, since it was already aligned to deal with F00F
bug. Since bss is cleared before IDT setup, it can live there. This also
moves the other *_idt_table variables into common locations.
This avoids the risk of the IDT ever being moved in the bss and having
the mapping be offset, resulting in calling incorrect handlers. In the
current upstream kernel this is not a manifested bug, but heavily patched
kernels (such as those using the PaX patch series) did encounter this bug.
The tables other than idt_table technically do not need to be page
aligned, at least not at the current time, but using a common
declaration avoids mistakes. On 64 bits the table is exactly one page
long, anyway.
cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regression
commit 2f7021a8 "cpufreq: protect 'policy->cpus' from offlining
during __gov_queue_work()" caused a regression in CPU hotplug,
because it lead to a deadlock between cpufreq governor worker thread
and the CPU hotplug writer task.
Lockdep splat corresponding to this deadlock is shown below:
[ 60.277396] ======================================================
[ 60.277400] [ INFO: possible circular locking dependency detected ]
[ 60.277407] 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 Not tainted
[ 60.277411] -------------------------------------------------------
[ 60.277417] bash/2225 is trying to acquire lock:
[ 60.277422] ((&(&j_cdbs->work)->work)){+.+...}, at: [<ffffffff810621b5>] flush_work+0x5/0x280
[ 60.277444] but task is already holding lock:
[ 60.277449] (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60
[ 60.277465] which lock already depends on the new lock.
The intention of that commit was to avoid warnings during CPU
hotplug, which indicated that offline CPUs were getting IPIs from the
cpufreq governor's work items. But the real root-cause of that
problem was commit a66b2e5 (cpufreq: Preserve sysfs files across
suspend/resume) because it totally skipped all the cpufreq callbacks
during CPU hotplug in the suspend/resume path, and hence it never
actually shut down the cpufreq governor's worker threads during CPU
offline in the suspend/resume path.
Reflecting back, the reason why we never suspected that commit as the
root-cause earlier, was that the original issue was reported with
just the halt command and nobody had brought in suspend/resume to the
equation.
The reason for _that_ in turn, as it turns out, is that earlier
halt/shutdown was being done by disabling non-boot CPUs while tasks
were frozen, just like suspend/resume.... but commit cf7df378a
(reboot: migrate shutdown/reboot to boot cpu) which came somewhere
along that very same time changed that logic: shutdown/halt no longer
takes CPUs offline. Thus, the test-cases for reproducing the bug
were vastly different and thus we went totally off the trail.
Overall, it was one hell of a confusion with so many commits
affecting each other and also affecting the symptoms of the problems
in subtle ways. Finally, now since the original problematic commit
(a66b2e5) has been completely reverted, revert this intermediate fix
too (2f7021a8), to fix the CPU hotplug deadlock. Phew!
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Peter Wu <lekensteyn@gmail.com> Cc: 3.10+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
be2net: Fix to avoid hardware workaround when not needed
Hardware workaround requesting hardware to skip vlan insertion is necessary
only when umc or qnq is enabled. Enabling this workaround in other scenarios
could cause controller to stall.
Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 16 Jul 2013 05:36:33 +0000 (13:36 +0800)]
macvtap: fix the missing ret value of TUNSETQUEUE
Commit 441ac0fcaadc76ad09771812382345001dd2b813
(macvtap: Convert to using rtnl lock) forget to return what
macvtap_ioctl_set_queue() returns to its caller. This may break multiqueue API
by always falling through to TUNGETFEATURES.
Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 16 Jul 2013 03:03:19 +0000 (20:03 -0700)]
ipv4: set transport header earlier
commit 45f00f99d6e ("ipv4: tcp: clean up tcp_v4_early_demux()") added a
performance regression for non GRO traffic, basically disabling
IP early demux.
IPv6 stack resets transport header in ip6_rcv() before calling
IP early demux in ip6_rcv_finish(), while IPv4 does this only in
ip_local_deliver_finish(), _after_ IP early demux.
GRO traffic happened to enable IP early demux because transport header
is also set in inet_gro_receive()
Instead of reverting the faulty commit, we can make IPv4/IPv6 behave the
same : transport_header should be set in ip_rcv() instead of
ip_local_deliver_finish()
ip_local_deliver_finish() can also use skb_network_header_len() which is
faster than ip_hdrlen()
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Bolle [Sun, 14 Jul 2013 12:02:19 +0000 (14:02 +0200)]
cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in Kconfig
Kconfig symbol S3C24XX_PLL depends on ARM_S3C24XX. But that symbol
doesn't exist. Commit f023f8dd59bf ("cpufreq: s3c24xx: move cpufreq
driver to drivers/cpufreq"), which added this issue, makes it clear
that ARM_S3C24XX_CPUFREQ was intended here.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tim Gardner [Mon, 15 Jul 2013 14:56:45 +0000 (08:56 -0600)]
mlx5 core: Fix __udivdi3 when compiling for 32 bit arches
Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Tue, 16 Jul 2013 14:49:41 +0000 (10:49 -0400)]
atl1e: unmap partially mapped skb on dma error and free skb
Ben Hutchings pointed out that my recent update to atl1e
in commit 352900b583b2852152a1e05ea0e8b579292e731e
("atl1e: fix dma mapping warnings") was missing a bit of code.
Specifically it reset the hardware tx ring to its origional state when
we hit a dma error, but didn't unmap any exiting mappings from the
operation. This patch fixes that up. It also remembers to free the
skb in the event that an error occurs, so we don't leak. Untested, as
I don't have hardware. I think its pretty straightforward, but please
review closely.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
We should be using groups, not attribute lists, for classes to allow
subdirectories, and soon, binary files. Groups are just more flexible
overall, so add them.
The dev_attrs list will go away after all in-kernel users are converted
to use dev_groups.
device_create_groups lets callers create devices as well as associated
sysfs attributes with a single call. This avoids race conditions seen
if sysfs attributes on new devices are created later.
[fixed up comment block placement and add checks for printk buffer
formats - gregkh]
sysfs: add support for binary attributes in groups
groups should be able to support binary attributes, just like it
supports "normal" attributes. This lets us only handle one type of
structure, groups, throughout the driver core and subsystems, making
binary attributes a "full fledged" part of the driver model, and not
something just "tacked on".
To make it easier for driver subsystems to work with attribute groups,
create the ATTRIBUTE_GROUPS macro to remove some of the repetitive
typing for the most common use for attribute groups.
Dave Airlie [Tue, 16 Jul 2013 00:19:44 +0000 (10:19 +1000)]
Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux
More DPM fixes, r6xx DMA fix for bo moving, UVD fixes,
one major regression fix on bootup on some machine (ttm backoff missing)
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
radeon kms: do not flush uninitialized hotplug work
drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level
drm/radeon: align VM PTBs (Page Table Blocks) to 32K
drm/radeon: allow selection of alignment in the sub-allocator
drm/radeon: never unpin UVD bo v3
drm/radeon: fix UVD fence emit
drm/radeon: add fault decode function for CIK
drm/radeon: add fault decode function for SI (v2)
drm/radeon: add fault decode function for cayman/TN (v2)
drm/radeon: use radeon device for request firmware
drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate
drm/radeon: use CP DMA on r6xx for bo moves
drm/radeon: implement bo copy callback using CP DMA (v2)
drm/radeon: Disable dma rings for bo moves on r6xx
drm/radeon/dpm: disable gfx PG on PALM
drm/radeon/hdmi: make sure we have an afmt block assigned
Merge tag 'regmap-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Fix regmap crash for async operation on busless maps
This fixes a crash if something tries to do an asynchronous operation
on busless maps which was introduced during the merge window"
* tag 'regmap-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: cache: bail in regmap_async_complete() for bus-less maps
Merge tag 'spi-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of things missed during the v3.11 work here:
- The spi-bitbang core requires a setup() function even if it does
nothing which caused breakage when some empty setup functions were
removed after their contents were factored out into the core.
While this is clearly silly and will be fixed for v3.12 for now we
just restore the functions.
- A missing case handled in the s3c64xx driver"
* tag 'spi-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: revert master->setup function removal for altera and nuc900
spi/xilinx: Revert master->setup function removal
spi: s3c64xx: add missing check for polling mode
H. Peter Anvin [Fri, 12 Jul 2013 23:48:12 +0000 (16:48 -0700)]
x86, suspend: Handle CPUs which fail to #GP on RDMSR
There are CPUs which have errata causing RDMSR of a nonexistent MSR to
not fault. We would then try to WRMSR to restore the value of that
MSR, causing a crash. Specifically, some Pentium M variants would
have this problem trying to save and restore the non-existent EFER,
causing a crash on resume.
Work around this by making sure we can write back the result at
suspend time.
Huge thanks to Christian Sünkenberg for finding the offending erratum
that finally deciphered the mystery.
Reported-and-tested-by: Johan Heinrich <onny@project-insanity.org> Debugged-by: Christian Sünkenberg <christian.suenkenberg@student.kit.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Link: http://lkml.kernel.org/r/51DDC972.3010005@student.kit.edu Cc: <stable@vger.kernel.org> # v3.7+
radeon kms: do not flush uninitialized hotplug work
Fix a warning from lockdep caused by calling flush_work() for
uninitialized hotplug work. Initialize hotplug_work, audio_work
and reset_work upon successful radeon_irq_kms_init() completion
and thus perform hotplug flush_work only when rdev->irq.installed
is true.
[ 4.790019] [drm] Loading CEDAR Microcode
[ 4.790943] r600_cp: Failed to load firmware "radeon/CEDAR_smc.bin"
[ 4.791152] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 4.791330] radeon 0000:01:00.0: disabling GPU acceleration
[ 4.792633] INFO: trying to register non-static key.
[ 4.792792] the code is fine but needs lockdep annotation.
[ 4.792953] turning off the locking correctness validator.
Merge tag 'asoc-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.11
The biggest change here is the OMAP change, these are larger than I'd
have liked but make the driver actually usable - during the merge window
OMAP removed support for non-DT OMAP4 boards but in doing so removed the
method of accessing DMA channels used by the ASoC drivers rendering them
unusuable.
Otherwise nothing exciting, the symmetric rates change for WM8978 is a
fix for the information we expose to userspace.
projects / karo-tx-linux.git / log