Ben Goz [Sun, 26 Oct 2014 16:07:34 +0000 (18:07 +0200)]
drm/amdkfd: Remove call to deprecated init_memory interface
This patch removes a call to kfd-->kgd interface function that is doing H/W
initialization. That function is moved into radeon to be part of the common
H/W initialization sequence. The interface function will be deleted.
Signed-off-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 21 Jan 2015 00:17:16 +0000 (10:17 +1000)]
Merge tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
imx-drm: encoder prepare/mode_set must use adjusted mode
imx-drm: ipuv3-crtc: Implement mode_fixup
drm_modes: add drm_display_mode_to_videomode
gpu: ipu-di: remove some non-functional code
gpu: ipu-di: Add ipu_di_adjust_videomode()
drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
drm: bridge/dw_hdmi: add rockchip rk3288 support
dt-bindings: Add documentation for rockchip dw hdmi
drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
drm: bridge/dw_hdmi: add mode_valid support
drm: bridge/dw_hdmi: add support for multi-byte register width access
dt-bindings: add document for dw_hdmi
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
drm: imx: imx-hdmi: split phy configuration to platform driver
drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
...
Dave Airlie [Wed, 21 Jan 2015 00:16:24 +0000 (10:16 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm: rcar-du: Implement support for interlaced modes
drm: rcar-du: Clamp DPMS states to on and off
drm: rcar-du: Enable hotplug detection on HDMI connector
drm: rcar-du: Output HSYNC instead of CSYNC
drm: rcar-du: Add support for external pixel clock
drm: rcar-du: Refactor DEFR8 feature
drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction
drm: rcar-du: Configure pitch for chroma plane of multiplanar formats
drm: rcar-du: Don't fail probe in case of partial encoder init error
drm: adv7511: Remove interlaced mode check
Dave Airlie [Wed, 21 Jan 2015 00:14:41 +0000 (10:14 +1000)]
Merge tag 'drm-amdkfd-next-2015-01-09' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Add support for SDMA usermode queues
- Replace logic of sub-allocating from GART buffer in amdkfd. Instead
of using radeon_sa module, use a new module that is more suited for
this purpose
- Add the number of watch points to amdkfd topology
- Split a function that did two things into two seperate functions.
* tag 'drm-amdkfd-next-2015-01-09' of git://people.freedesktop.org/~gabbayo/linux:
drm/amd: Remove old radeon_sa funcs from kfd-->kgd interface
drm/radeon: Remove old radeon_sa usage from kfd-->kgd interface
drm/amdkfd: Using new gtt sa in amdkfd
drm/amdkfd: Allocate gart memory using new interface
drm/amdkfd: Fixed calculation of gart buffer size
drm/amdkfd: Add kfd gtt sub-allocator functions
drm/amdkfd: Add gtt sa related data to kfd_dev struct
drm/radeon: Impl. new gtt allocate/free functions
drm/amd: Add new kfd-->kgd interface for gart usage
drm/radeon: Enable sdma preemption
drm/amdkfd: Pass queue type to pqm_create_queue()
drm/amdkfd: Identify SDMA queue in create queue ioctl
drm/amdkfd: Add SDMA user-mode queues support to QCM
drm/amdkfd: Add SDMA mqd support
drm/radeon: Implement SDMA interface functions
drm/amd: Add SDMA functions to kfd-->kgd interface
drm/amdkfd: Process-device data creation and lookup split
drm/amdkfd: Add number of watch points to topology
Dave Airlie [Fri, 9 Jan 2015 22:46:24 +0000 (08:46 +1000)]
Merge tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel into drm-next
- plane handling refactoring from Matt Roper and Gustavo Padovan in prep for
atomic updates
- fixes and more patches for the seqno to request transformation from John
- docbook for fbc from Rodrigo
- prep work for dual-link dsi from Gaurav Signh
- crc fixes from Ville
- special ggtt views infrastructure from Tvrtko Ursulin
- shadow patch copying for the cmd parser from Brad Volkin
- execlist and full ppgtt by default on gen8, for testing for now
* tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits)
drm/i915: Update DRIVER_DATE to 20141219
drm/i915: Hold runtime PM during plane commit
drm/i915: Organize bind_vma funcs
drm/i915: Organize INSTDONE report for future.
drm/i915: Organize PDP regs report for future.
drm/i915: Organize PPGTT init
drm/i915: Organize Fence registers for future enablement.
drm/i915: tame the chattermouth (v2)
drm/i915: Warn about missing context state workarounds only once
drm/i915: Use true PPGTT in Gen8+ when execlists are enabled
drm/i915: Skip gunit save/restore for cherryview
drm/i915/chv: Use timeout mode for RC6 on chv
drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist
drm/i915: Tidy up execbuffer command parsing code
drm/i915: Mark shadow batch buffers as purgeable
drm/i915: Use batch length instead of object size in command parser
drm/i915: Use batch pools with the command parser
drm/i915: Implement a framework for batch buffer pools
drm/i915: fix use after free during eDP encoder destroying
drm/i915/skl: Skylake also supports DP MST
...
Oded Gabbay [Sun, 26 Oct 2014 07:53:37 +0000 (09:53 +0200)]
drm/amdkfd: Allocate gart memory using new interface
This patch changes the calls to allocate the gart memory for amdkfd from the
old interface (radeon_sa) to the new one (kfd_gtt_sa)
The new gart sub-allocator is initialized with chunk size equal to 512 bytes.
This is because the KV MQD is 512 Bytes and most of the sub-allocations are
MQDs.
Oded Gabbay [Mon, 27 Oct 2014 12:36:07 +0000 (14:36 +0200)]
drm/amdkfd: Add kfd gtt sub-allocator functions
This patch adds new kfd gtt sub-allocator functions that service the amdkfd
driver when it wants to use gtt memory.
The sub-allocator uses a bitmap to handle the memory area that was transferred
to it during init. It divides the memory area into chunks, according to chunk
size parameter.
The allocation function will allocate contiguous chunks from that memory area,
according to the requested size. If the requested size is smaller than the
chunk size, a single chunk will be allocated.
v2: Do some more verifications on parameters that are passed into
kfd_gtt_sa_init()
Oded Gabbay [Sun, 26 Oct 2014 18:52:55 +0000 (20:52 +0200)]
drm/radeon: Impl. new gtt allocate/free functions
This patch adds the implementation of the gtt interface functions.
The allocate function will allocate a single bo, pin and map it to kernel
memory. It will return the gpu address and cpu ptr as arguments.
v2:
The bulk of the allocations in the GART is for MQDs. MQDs represent active
user-mode queues, which are on the current runlist. It is important to
remember that active queues doesn't necessarily mean scheduled/running
queues, especially if there is over-subscription of queues or more than a
single HSA process.
Because the scheduling of the user-mode queues is done by the CP firmware,
amdkfd doesn't have any indication if the queue is scheduled or not. If the
CP will try to schedule a queue, and its MQD is not present, this will
probably stuck the CP permanently, as it will load garbage from the GART
(the address of the MQD is given to the CP inside the runlist packet).
In addition, there are a couple of small allocations which also should
always be pinned - runlist packets (2 packets) and HPDs. runlist packets can
be quite large, depending on number of processes and queues.
This new allocate function represents the short/mid-term solution of limiting
the total memory consumption to around 4MB by default.
The long-term solution is to create a mechanism through which radeon/ttm can
ask amdkfd to clear GART/VRAM memory due to memory pressure.
Then, amdkfd will preempt the running queues and wait until the memory pressure
is over. After that, amdkfd will reschedule the queues.
Oded Gabbay [Sun, 26 Oct 2014 18:45:45 +0000 (20:45 +0200)]
drm/amd: Add new kfd-->kgd interface for gart usage
This patch adds two new functions to the kfd-->kgd interface:
init_gtt_mem_allocation, which allocate a large enough buffer on the amdkfd
needs, such as mqds, hpds, kernel queue, fence and runlists. This function
is only called once per GPU device. The size of the allocated buffer is
based on the maximum number of HSA processes and maximum number of queues
per HSA process (two amdkfd kernel module parameters).
free_gtt_mem, which frees a buffer that was allocated on the gart aperture.
Alexey Skidanov [Tue, 18 Nov 2014 12:00:04 +0000 (14:00 +0200)]
drm/amdkfd: Process-device data creation and lookup split
This patch splits the current kfd_get_process_device_data() to two
functions, one that specifically creates a pdd and another one which
just do lookup.
This is done to enhance the readability and maintainability of the code.
Dave Airlie [Thu, 8 Jan 2015 23:22:40 +0000 (09:22 +1000)]
Merge tag 'topic/atomic-core-2015-01-05' of git://anongit.freedesktop.org/drm-intel into drm-next
Next batch of atomic work. Most important is the propertification from Rob
and the nth iteration of the actual atomic ioctl originally from Ville.
Big differences compared to earlier revisions:
- Core properties are now fully handled by the core, drivers can only
handle driver-specific properties.
- Atomic props&ioctl are opt-in per file_priv, userspace needs to
explicitly ask for it (like universal plane support).
- For now all hidden behind the atomic module option until this has
settled a bit.
- Atomic modesets are currently not possible since the exact abi for how
to handle the mode property is still under discussion.
Besides this some cleanup patches from me and the addition of per-object
state to global state backpointers to simplify drivers.
* tag 'topic/atomic-core-2015-01-05' of git://anongit.freedesktop.org/drm-intel:
drm: Ensure universal_planes is set for atomic
drm/atomic: Hide drm.ko internal interfaces
drm: Atomic modeset ioctl
drm/atomic: atomic connector properties
drm/atomic: atomic plane properties
drm: small property creation cleanup
drm/atomic: atomic_check functions
drm: add atomic properties
drm: refactor getproperties/getconnector
drm: tweak getconnector locking
drm: add atomic_get_property
drm: add atomic_set_property wrappers
drm: get rid of direct property value access
drm: store property instead of id in obj attachment
drm: allow property validation for refcnted props
drm/atomic: Introduce state->obj backpointers
drm/atomic-helper: Again check modeset *before* plane states
drm/atomic-helper: Export both plane and modeset check helpers
Dave Airlie [Thu, 8 Jan 2015 23:13:41 +0000 (09:13 +1000)]
Merge tag 'topic/core-stuff-2014-12-19' of git://anongit.freedesktop.org/drm-intel into drm-next
Misc drm patches with mostly polish patches from Thierry, with a bit of
generic mode validation from Ville and a few other oddball things.
* tag 'topic/core-stuff-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (25 commits)
drm: Include drm_crtc_helper.h in DocBook
drm: Make drm_crtc_helper.h standalone includible
drm: Move IRQ related fields to proper section
drm: Remove stale comment
drm: Do basic sanity checks for user modes
drm: Perform basic sanity checks on probed modes
drm: Reorganize probed mode validation
drm/doc: Remove duplicate "by"
drm/info: Remove unused code
drm/cache: Use wbinvd helpers
drm/plane-helper: Test for plane disable earlier
drm/doc: Document drm_add_modes_noedid() usage
drm: bit of spell-check / editorializing.
drm: Prefer sizeof(type) over sizeof type
drm: Remove useless else block
drm: Remove unneeded braces for single statement blocks
drm: Do not assign in if condition
drm: Prefer kmalloc_array() over kmalloc() with multiply
drm: Prefer kcalloc() over kzalloc() with multiply
drm: Miscellaneous checkpatch whitespace cleanups
...
Russell King [Sun, 21 Dec 2014 15:58:19 +0000 (15:58 +0000)]
imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
We do not need to track the state of the IPU DI's clock flags by having
each display bridge calling back into imx-drm-core, and then back out
into ipuv3-crtc.c.
ipuv3-crtc can instead just scan the list of encoders to retrieve their
type, and build up a picture of which types of encoders are attached.
We can then use this information to configure the IPU DI clocking mode
without any uncertainty - if we have multiple bridges connected to the
same DI, if one of them requires a synchronous DI clock, that's what we
must use.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Steve Longerbeam [Fri, 19 Dec 2014 02:00:26 +0000 (18:00 -0800)]
gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
We can use the DIV_ROUND_CLOSEST() macro when calculating the DI
clock divider, rounded to nearest int.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Steve Longerbeam [Fri, 19 Dec 2014 02:00:23 +0000 (18:00 -0800)]
imx-drm: ipuv3-crtc: Implement mode_fixup
Ask the IPU display interface, via ipu_di_adjust_videomode(), to
adjust a video mode to meet any DI restrictions. The function takes
a subsystem independent videomode, so the drm_display_mode must be
converted to videomode first, and then the adjusted mode converted
back to a drm_display_mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Jiada Wang [Fri, 19 Dec 2014 02:00:20 +0000 (18:00 -0800)]
gpu: ipu-di: Add ipu_di_adjust_videomode()
On some monitors, high resolution modes are not working, exhibiting
pixel column truncation problems (for example, 1280x1024 displays as
1280x1022).
The function ipu_di_adjust_videomode() aims to fix these issues by
adjusting a passed videomode to IPU restrictions. The function can
be called from the drm_crtc_helper_funcs->mode_fixup() methods.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Deepak Das <deepak_das@mentor.com> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Wed, 7 Jan 2015 07:48:27 +0000 (15:48 +0800)]
drm: bridge/dw_hdmi: add rockchip rk3288 support
Rockchip RK3288 hdmi is compatible with dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:33:33 +0000 (14:33 +0800)]
dt-bindings: Add documentation for rockchip dw hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:31:53 +0000 (14:31 +0800)]
drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
RK3288 HDMI will not work without the spare bit of
HDMI_PHY_CONF0 enable
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:31:09 +0000 (14:31 +0800)]
drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
HDMI_IH_I2CMPHY_STAT0 is a clear on write register, which indicates i2cm
operation status(i2c transfer done or error), every hdmi phy register
configuration must check this register to make sure the configuration
has complete. But the indication bit should be cleared after check, otherwise
the corresponding bit will hold on forever, this may give a wrong signal for
next check.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:30:21 +0000 (14:30 +0800)]
drm: bridge/dw_hdmi: add mode_valid support
some platform may not support all the display mode,
add mode_valid interface check it
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:28:24 +0000 (14:28 +0800)]
drm: bridge/dw_hdmi: add support for multi-byte register width access
On rockchip rk3288, only word(32-bit) accesses are
permitted for hdmi registers. Byte width accesses (writeb,
readb) generate an imprecise external abort.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:27:14 +0000 (14:27 +0800)]
dt-bindings: add document for dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:26:31 +0000 (14:26 +0800)]
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
the original imx hdmi driver is under drm/imx/,
which depends on imx-drm, so move the imx hdmi
driver out to drm/bridge and rename it to dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:25:50 +0000 (14:25 +0800)]
drm: imx: imx-hdmi: split phy configuration to platform driver
hdmi phy configuration is platform specific, which can be adjusted
according to the board to get the best SI
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:25:05 +0000 (14:25 +0800)]
drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
IMX6 and Rockchip RK3288 and JZ4780 (Ingenic Xburst/MIPS)
use the interface compatible Designware HDMI IP, but they
also have some lightly differences, such as phy pll configuration,
register width, 4K support, clk useage, and the crtc mux configuration
is also platform specific.
To reuse the imx hdmi driver, convert it to drm_bridge
handle encoder in imx-hdmi_pltfm.c, as most of the encoder
operation are platform specific such as crtc select and
panel format set
This patch depends on Russell King's patch:
drm: imx: convert imx-drm to use the generic DRM OF helper
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2014-July/053484.html
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:24:28 +0000 (14:24 +0800)]
drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter
drm driver may probe before the i2c bus, so the driver should
defer probing until it is available
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Andy Yan [Fri, 5 Dec 2014 06:23:52 +0000 (14:23 +0800)]
drm: imx: imx-hdmi: make checkpatch happy
CHECK: Alignment should match open parenthesis
+ if ((hdmi->vic == 10) || (hdmi->vic == 11) ||
+ (hdmi->vic == 12) || (hdmi->vic == 13) ||
CHECK: braces {} should be used on all arms of this statement
+ if (hdmi->hdmi_data.video_mode.mdvi)
[...]
+ else {
[...]
Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Steve Longerbeam [Mon, 26 Aug 2013 18:42:09 +0000 (11:42 -0700)]
gpu: ipu-v3: Implement use counter for ipu_dc_enable(), ipu_dc_disable()
The functions ipu_dc_enable() and ipu_dc_disable() enable/disable the DC
globally in the IPU_CONF register, but the DC is used by multiple clients
on different DC channels. So make sure to only disable/enable the DC
globally based on a use counter.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Linus Torvalds [Mon, 5 Jan 2015 22:49:02 +0000 (14:49 -0800)]
Merge tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
- Wire up sys_execveat(). Tested on 32 & 64 bit.
- Fix for kdump on LE systems with cpus hot unplugged.
- Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this
broke other platforms, we'll do a proper fix for 3.20.
* tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online"
powerpc/kdump: Ignore failure in enabling big endian exception during crash
powerpc: Wire up sys_execveat() syscall
Daniel Vetter [Fri, 19 Dec 2014 09:33:52 +0000 (10:33 +0100)]
drm: Ensure universal_planes is set for atomic
Atomic doesn't really work without universal planes anyway. But make
sure that evil userspace doesn't pull the kernel over the table
because we didn't consider a cornercase that just doesn't make sense,
just for safety.
v2: Just force ->universal_planes to the same value to avoid imposing
restrictions on userspace.
Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 18 Dec 2014 21:49:02 +0000 (22:49 +0100)]
drm/atomic: Hide drm.ko internal interfaces
This is just a bit fallout from patch polishing and moving the
get_prop logic fully into the core:
- Drop EXPORT_SYMBOL and make the helpers static.
- Drop kerneldoc since not used by drivers.
- Move the cross-file function declarations only used by drm.ko
internally to an internal header.
v2: keep the gist of the comments, requested by Rob.
Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Rob Clark [Thu, 18 Dec 2014 21:01:56 +0000 (16:01 -0500)]
drm: Atomic modeset ioctl
The atomic modeset ioctl can be used to push any number of new values
for object properties. The driver can then check the full device
configuration as single unit, and try to apply the changes atomically.
The ioctl simply takes a list of object IDs and property IDs and their
values.
Originally based on a patch from Ville Syrjälä, although it has mutated
(mutilated?) enough since then that you probably shouldn't blame it on
him ;-)
The atomic support is hidden behind the DRM_CLIENT_CAP_ATOMIC cap (to
protect legacy userspace) and drm.atomic module param (for now).
v2: Check for file_priv->atomic to make sure we only allow userspace
in-the-know to use atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Thu, 18 Dec 2014 21:01:54 +0000 (16:01 -0500)]
drm/atomic: atomic connector properties
Expose the core connector state as properties so it can be updated via
atomic ioctl.
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Thu, 18 Dec 2014 21:01:53 +0000 (16:01 -0500)]
drm/atomic: atomic plane properties
Expose the core plane state as properties, so they can be updated via
atomic ioctl.
v2: atomic property flag
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Thu, 18 Dec 2014 21:01:52 +0000 (16:01 -0500)]
drm: small property creation cleanup
Getting ready to add a lot more standard properties for atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Realign function paramaters where the lines shrunk
massively.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Thu, 18 Dec 2014 21:01:51 +0000 (16:01 -0500)]
drm/atomic: atomic_check functions
Add functions to check core plane/crtc state.
v2: comments, int-overflow checks, call from core rather than
helpers to be sure drivers can't find a way to bypass core
checks
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Thu, 18 Dec 2014 21:01:50 +0000 (16:01 -0500)]
drm: add atomic properties
Once a driver is using atomic helpers for modeset, the next step is to
switch over to atomic properties. To do this, make sure that any
modeset objects have their ->atomic_{get,set}_property() vfuncs suitably
populated if they have custom properties (you did already remember to
plug in atomic-helper func for the legacy ->set_property() vfuncs,
right?), and then set DRIVER_ATOMIC bit in driver_features flag.
A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of
shielding legacy userspace from atomic properties. Mostly for the
benefit of legacy DDX drivers that do silly things like getting/setting
each property at startup (since some of the new atomic properties will
be able to trigger modeset).
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC
instaed of the CAP define when filtering properties. Reported by
Tvrtko Uruslin, acked by Rob.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Sun, 4 Jan 2015 19:46:43 +0000 (11:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
"Two fixes for UML regressions. Nothing exciting"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
x86, um: actually mark system call tables readonly
um: Skip futex_atomic_cmpxchg_inatomic() test
Pavel Machek [Sun, 4 Jan 2015 19:01:23 +0000 (20:01 +0100)]
Revert "ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo"
Commit 9fc2105aeaaf ("ARM: 7830/1: delay: don't bother reporting
bogomips in /proc/cpuinfo") breaks audio in python, and probably
elsewhere, with message
Daniel Borkmann [Sat, 3 Jan 2015 12:11:10 +0000 (13:11 +0100)]
x86, um: actually mark system call tables readonly
Commit a074335a370e ("x86, um: Mark system call tables readonly") was
supposed to mark the sys_call_table in UML as RO by adding the const,
but it doesn't have the desired effect as it's nevertheless being placed
into the data section since __cacheline_aligned enforces sys_call_table
being placed into .data..cacheline_aligned instead. We need to use
the ____cacheline_aligned version instead to fix this issue.
Before:
$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
U sys_writev 0000000000000000 D sys_call_table 0000000000000000 D syscall_table_size
After:
$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
U sys_writev 0000000000000000 R sys_call_table 0000000000000000 D syscall_table_size
Fixes: a074335a370e ("x86, um: Mark system call tables readonly") Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at>
futex_atomic_cmpxchg_inatomic() does not work on UML because
it triggers a copy_from_user() in kernel context.
On UML copy_from_user() can only be used if the kernel was called
by a real user space process such that UML can use ptrace()
to fetch the value.
Reported-by: Miklos Szeredi <miklos@szeredi.hu> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at> Tested-by: Daniel Walter <d.walter@0x90.at>
Linus Torvalds [Fri, 2 Jan 2015 21:24:41 +0000 (13:24 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three fixes: one to correct an abort path thinko
causing failures (and a panic) in USB on device misbehaviour, One to
fix an out of order issue in the fnic driver and one to match discard
expectations to qemu which otherwise cause Linux to behave badly as a
guest"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
SCSI: fix regression in scsi_send_eh_cmnd()
fnic: IOMMU Fault occurs when IO and abort IO is out of order
sd: tweak discard heuristics to work around QEMU SCSI issue
Linus Torvalds [Fri, 2 Jan 2015 20:57:20 +0000 (12:57 -0800)]
Merge tag 'sound-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing too exciting as a new year's start here: most of fixes are for
ASoC, a boot crash fix on OMAP for deferred probe, a few driver
specific fixes (Intel, dwc, rockchip, rt5677), in addition to typo
fixes in kerneldoc comments for PCM"
* tag 'sound-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix kerneldoc for params_*() functions
ASoC: rockchip: i2s: fix maxburst of dma data to 4
ASoC: rockchip: i2s: fix error defination of transmit data level
ASoC: Intel: correct the fixed free block allocation
ASoC: rt5677: fixed rt5677_dsp_vad_put rt5677_dsp_vad_get panic
ASoC: Intel: Fix BYTCR machine driver MODULE_ALIAS
ASoC: Intel: Fix BYTCR firmware name
ASoC: dwc: Iterate over all channels
ASoC: dwc: Ensure FIFOs are flushed to prevent channel swap
ASoC: Intel: Add I2C dependency to two new machines
ASoC: dapm: Remove snd_soc_of_parse_audio_routing() due to deferred probe
Linus Torvalds [Fri, 2 Jan 2015 20:07:50 +0000 (12:07 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost cleanup and virtio bugfix
"There's a single change here, fixing a vhost bug where vhost
initialization fails due to used ring alignment check being too
strict"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: relax used address alignment
virtio_ring: document alignment requirements
Linus Torvalds [Wed, 31 Dec 2014 22:52:18 +0000 (14:52 -0800)]
Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit fix from Paul Moore:
"One audit patch to resolve a panic/oops when recording filenames in
the audit log, see the mail archive link below.
The fix isn't as nice as I would like, as it involves an allocate/copy
of the filename, but it solves the problem and the overhead should
only affect users who have configured audit rules involving file
names.
We'll revisit this issue with future kernels in an attempt to make
this suck less, but in the meantime I think this fix should go into
the next release of v3.19-rcX.
Tobias Klauser [Wed, 31 Dec 2014 02:53:11 +0000 (10:53 +0800)]
nios2: Use preempt_schedule_irq
Follow aa0d53260596 ("ia64: Use preempt_schedule_irq") and use
preempt_schedule_irq instead of enabling/disabling interrupts and
messing around with PREEMPT_ACTIVE in the nios2 low-level preemption
code ourselves. Also get rid of the now needless re-check for
TIF_NEED_RESCHED, preempt_schedule_irq will already take care of
rescheduling.
This also fixes the following build error when building with
CONFIG_PREEMPT:
arch/nios2/kernel/built-in.o: In function `need_resched':
arch/nios2/kernel/entry.S:374: undefined reference to `PREEMPT_ACTIVE'
Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Ley Foon Tan <lftan@altera.com>
Linus Torvalds [Wed, 31 Dec 2014 01:13:13 +0000 (17:13 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A very small set of fixes for 3.19, as everyone was out.
The clocksource patch was something I missed for the merge window
after the change that broke arm64 was merged through arm-soc. The
other two patches are a fix for an undetected merge problem in mvebu
and a defconfig change to make some exynos boards work with the normal
multi_v7_defconfig"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Add USB_EHCI_EXYNOS to multi_v7_defconfig
ARM: mvebu: Fix pinctrl configuration for Armada 370 DB
clocksource: arch_timer: Only use the virtual counter (CNTVCT) on arm64
Linus Torvalds [Wed, 31 Dec 2014 01:04:56 +0000 (17:04 -0800)]
Merge tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- Fix regression with Nokia N900 display
- Fix crash on fbdev using freed __initdata logos
- Fix fb_deferred_io_fsync() return value.
* tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
OMAPDSS: SDI: fix output port_num
video/fbdev: fix defio's fsync
video/logo: prevent use of logos after they have been freed
OMAPDSS: pll: NULL dereference in error handling
OMAPDSS: HDMI: remove double initializer entries
It's causing severe userspace breakage. Namely, all the utilities from
wireless-utils which are relying on CONFIG_WEXT (which means tools like
'iwconfig', 'iwlist', etc) are not working anymore. There is a 'iw'
utility in newer wireless-tools, which is supposed to be a replacement
for all the "deprecated" binaries, but it's far away from being
massively adopted.
Please see [1] for example of the userspace breakage this is causing.
In addition to that, Larry Finger reports [2] that this patch is also
causing ipw2200 driver being impossible to build.
To me this clearly shows that CONFIG_WEXT is far, far away from being
"deprecated enough" to be removed.
1) Fix double SKB free in bluetooth 6lowpan layer, from Jukka Rissanen.
2) Fix receive checksum handling in enic driver, from Govindarajulu
Varadarajan.
3) Fix NAPI poll list corruption in virtio_net and caif_virtio, from
Herbert Xu. Also, add code to detect drivers that have this mistake
in the future.
4) Fix doorbell endianness handling in mlx4 driver, from Amir Vadai.
5) Don't clobber IP6CB() before xfrm6_policy_check() is called in TCP
input path,f rom Nicolas Dichtel.
6) Fix MPLS action validation in openvswitch, from Pravin B Shelar.
7) Fix double SKB free in vxlan driver, also from Pravin.
8) When we scrub a packet, which happens when we are switching the
context of the packet (namespace, etc.), we should reset the
secmark. From Thomas Graf.
9) ->ndo_gso_check() needs to do more than return true/false, it also
has to allow the driver to clear netdev feature bits in order for
the caller to be able to proceed properly. From Jesse Gross.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
genetlink: A genl_bind() to an out-of-range multicast group should not WARN().
netlink/genetlink: pass network namespace to bind/unbind
ne2k-pci: Add pci_disable_device in error handling
bonding: change error message to debug message in __bond_release_one()
genetlink: pass multicast bind/unbind to families
netlink: call unbind when releasing socket
netlink: update listeners directly when removing socket
genetlink: pass only network namespace to genl_has_listeners()
netlink: rename netlink_unbind() to netlink_undo_bind()
net: Generalize ndo_gso_check to ndo_features_check
net: incorrect use of init_completion fixup
neigh: remove next ptr from struct neigh_table
net: xilinx: Remove unnecessary temac_property in the driver
net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding
openvswitch: fix odd_ptr_err.cocci warnings
Bluetooth: Fix accepting connections when not using mgmt
Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR
brcmfmac: Do not crash if platform data is not populated
ipw2200: select CFG80211_WEXT
...
Alan Stern [Fri, 21 Nov 2014 15:44:49 +0000 (10:44 -0500)]
SCSI: fix regression in scsi_send_eh_cmnd()
Commit ac61d1955934 (scsi: set correct completion code in
scsi_send_eh_cmnd()) introduced a bug. It changed the stored return
value from a queuecommand call, but it didn't take into account that
the return value was used again later on. This patch fixes the bug by
changing the later usage.
There is a big comment in the middle of scsi_send_eh_cmnd() which
does a good job of explaining how the routine works. But it mentions
a "rtn = FAILURE" value that doesn't exist in the code. This patch
adjusts the code to match the comment (I assume the comment is right
and the code is wrong).
This fixes Bugzilla #88341.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Андрей Аладьев <aladjev.andrew@gmail.com> Tested-by: Андрей Аладьев <aladjev.andrew@gmail.com> Fixes: ac61d19559349e205dad7b5122b281419aa74a82 Acked-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Takashi Iwai [Tue, 30 Dec 2014 15:17:13 +0000 (16:17 +0100)]
Merge tag 'asoc-fix-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.19
A few fixes for v3.19, a few driver specifics and one core fix which
fixes a boot crash on OMAP if deferred probing kicks in due to
attempting to modify static data.
Currently we enable Exynos devices in the multi v7 defconfig, however, when
testing on my ODROID-U3, I noticed that USB was not working. Enabling this
option causes USB to work, which enables networking support as well since the
ODROID-U3 has networking on the USB bus.
[arnd] Support for odroid-u3 was added in 3.10, so it would be nice to
backport this fix at least that far.
Paul Moore [Tue, 30 Dec 2014 14:26:21 +0000 (09:26 -0500)]
audit: create private file name copies when auditing inodes
Unfortunately, while commit 4a928436 ("audit: correctly record file
names with different path name types") fixed a problem where we were
not recording filenames, it created a new problem by attempting to use
these file names after they had been freed. This patch resolves the
issue by creating a copy of the filename which the audit subsystem
frees after it is done with the string.
At some point it would be nice to resolve this issue with refcounts,
or something similar, instead of having to allocate/copy strings, but
that is almost surely beyond the scope of a -rcX patch so we'll defer
that for later. On the plus side, only audit users should be impacted
by the string copying.
Reported-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: Paul Moore <pmoore@redhat.com>
fnic: IOMMU Fault occurs when IO and abort IO is out of order
When I/O is aborted by mid-layer, fnic FW will complete the I/O before
completing the abort task. In some cases abort request is completed before
the I/O, which could lead to inconsistent driver and firmware states.
In this case firmware reset would clear the inconsistent state.
Signed-off-by: Anil Chintalapati <achintal@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by: Hiral Shah <hishah@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
sd: tweak discard heuristics to work around QEMU SCSI issue
7985090aa020 changed the discard heuristics to give preference to the
WRITE SAME commands that (unlike UNMAP) guarantee deterministic results.
Ming Lei discovered that QEMU SCSI's WRITE SAME implementation
internally relied on limits that were only communicated for the UNMAP
case. And therefore discard commands backed by WRITE SAME would fail.
Tweak the heuristics so we still pick UNMAP in the LBPRZ=0 case and only
prefer the WRITE SAME variants if the device has the LBPRZ flag set.
Reported-by: Ming Lei <ming.lei@canonical.com> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Tomi Valkeinen [Mon, 29 Dec 2014 07:57:11 +0000 (09:57 +0200)]
OMAPDSS: SDI: fix output port_num
After the commit ef691ff48bc8 (OMAPDSS: DT: Get source endpoint by
matching reg-id) we look for the SDI output using the port number.
However, the SDI driver doesn't set the port number, which causes the
SDI display to not initialize.
Fix this by setting the SDI port number to 1. We use a hardcoded value,
as SDI was used only on OMAP3 and it's always port number 1 there.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tomi Valkeinen [Fri, 19 Dec 2014 11:55:41 +0000 (13:55 +0200)]
video/fbdev: fix defio's fsync
fb_deferred_io_fsync() returns the value of schedule_delayed_work() as
an error code, but schedule_delayed_work() does not return an error. It
returns true/false depending on whether the work was already queued.
Fix this by ignoring the return value of schedule_delayed_work().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 30 Dec 2014 05:09:57 +0000 (21:09 -0800)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"A set of three minor cifs fixes"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make new inode cache when file type is different
Fix signed/unsigned pointer warning
Convert MessageID in smb2_hdr to LE
Linus Torvalds [Tue, 30 Dec 2014 04:43:10 +0000 (20:43 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF & isofs fixes from Jan Kara:
"A couple of UDF fixes of handling of corrupted media and one iso9660
fix of the same"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Reduce repeated dereferences
udf: Check component length before reading it
udf: Check path length when reading symlink
udf: Verify symlink size before loading it
udf: Verify i_size when loading inode
isofs: Fix unchecked printing of ER records
Linus Torvalds [Tue, 30 Dec 2014 02:50:02 +0000 (18:50 -0800)]
Merge tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI material from Rafael J Wysocki:
"These are fixes (operating performance points library, cpufreq-dt
driver, cpufreq core, ACPI backlight, cpupower tool), cleanups
(cpuidle), new processor IDs for the RAPL (Running Average Power
Limit) power capping driver, and a modification of the generic power
domains framework allowing modular drivers to call one of its helper
functions.
Specifics:
- Fix for a potential NULL pointer dereference in the cpufreq core
due to an initialization race condition (Ethan Zhao).
- Fixes for abuse of the OPP (Operating Performance Points) API
related to RCU and other minor issues in the OPP library and the
cpufreq-dt driver (Dmitry Torokhov).
- cpuidle governors cleanup making them measure idle duration in a
better way without using the CPUIDLE_FLAG_TIME_INVALID flag which
allows that flag to be dropped from the ACPI cpuidle driver and
from the core too (Len Brown).
- New ACPI backlight blacklist entries for Samsung machines without a
working native backlight interface that need to use the ACPI
backlight instead (Aaron Lu).
- New CPU IDs of future Intel Xeon CPUs for the Intel RAPL power
capping driver (Jacob Pan).
- Generic power domains framework modification to export the
of_genpd_get_from_provider() function to modular drivers that will
allow future driver modifications to be based on the mainline (Amit
Daniel Kachhap).
- Two fixes for the cpupower tool (Michal Privoznik, Prarit
Bhargava)"
* tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Add some Samsung models to disable_native_backlight list
tools / cpupower: Fix no idle state information return value
tools / cpupower: Correctly detect if running as root
cpufreq: fix a NULL pointer dereference in __cpufreq_governor()
cpufreq-dt: defer probing if OPP table is not ready
PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
PM / OPP: fix warning in of_free_opp_table()
PM / OPP: add some lockdep annotations
powercap / RAPL: add IDs for future Xeon CPUs
PM / Domains: Export of_genpd_get_from_provider function
cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID
cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
Linus Torvalds [Mon, 29 Dec 2014 21:30:50 +0000 (13:30 -0800)]
Merge tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, the DMA burst size increase in the
spfi driver is a fix to make the hardware happier in some situations"
* tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: img-spfi: Increase DMA burst size
spi: img-spfi: Enable controller before starting TX DMA
spi: sh-msiof: Add runtime PM lock in initializing
projects / karo-tx-linux.git / log