]> git.karo-electronics.de Git - linux-beck.git/log
linux-beck.git
11 years agoopenvswitch:: link upper device for port devices
Jiri Pirko [Fri, 26 Jul 2013 12:01:54 +0000 (14:01 +0200)]
openvswitch:: link upper device for port devices

Link upper device properly. That will make IFLA_MASTER filled up.
Set the master to port 0 of the datapath under which the port belongs.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jesse Gross <jesse@nicira.com>
11 years agoopenvswitch: Use non rcu hlist_del() flow table entry.
Pravin B Shelar [Tue, 30 Jul 2013 22:45:59 +0000 (15:45 -0700)]
openvswitch: Use non rcu hlist_del() flow table entry.

Flow table destroy is done in rcu call-back context.  Therefore
there is no need to use rcu variant of hlist_del().

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
11 years agoopenvswitch: Use RCU lock for dp dump operation.
Pravin B Shelar [Tue, 30 Jul 2013 22:42:19 +0000 (15:42 -0700)]
openvswitch: Use RCU lock for dp dump operation.

RCUfy dp-dump operation which is already read-only. This
makes all ovs dump operations lockless.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
11 years agoopenvswitch: Use RCU lock for flow dump operation.
Pravin B Shelar [Tue, 30 Jul 2013 22:39:39 +0000 (15:39 -0700)]
openvswitch: Use RCU lock for flow dump operation.

Flow dump operation is read-only operation.  There is no need to
take ovs-lock.  Following patch use rcu-lock for dumping flows.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
11 years agofs_enet: cleanup clock API use
Gerhard Sittig [Thu, 22 Aug 2013 19:55:13 +0000 (21:55 +0200)]
fs_enet: cleanup clock API use

make the Freescale ethernet driver get, prepare and enable the FEC clock
during probe(); disable and unprepare the clock upon remove(), put is
done by the devm approach; hold a reference to the clock over the period
of use.

clock lookup is non-fatal as not all platforms provide clock specs in
their device tree; failure to enable specified clocks is fatal.

Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agofs_enet: silence a build warning (unused variable)
Gerhard Sittig [Thu, 22 Aug 2013 19:55:12 +0000 (21:55 +0200)]
fs_enet: silence a build warning (unused variable)

Since commit 720a43efd30f04a0a492c85fb997361c44fbae05
(drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb)
there is a build warning:

drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c: In function 'tx_skb_align_workaround':
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c:586:26: warning: unused variable 'fep'

Fix it.

Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp_probe: simplify code by using %pISc format specifier
Daniel Borkmann [Thu, 22 Aug 2013 15:12:50 +0000 (17:12 +0200)]
net: sctp_probe: simplify code by using %pISc format specifier

We can simply use the %pISc format specifier that was recently added
and thus remove some code that distinguishes between IPv4 and IPv6.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next into cpsw
David S. Miller [Fri, 23 Aug 2013 03:49:59 +0000 (20:49 -0700)]
Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next into cpsw

Marc Kleine-Budde says:

====================
another pull-request for net-next. It consists of two patches by Libo
Chen, the at91 and flexcan driver make use of platform_set_drvdata()
rather than open coding it. Chen Gang improves the error checking in
the c_can_platform driver's probe function.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: ethernet: davinci_cpdma: export cpdma_chan_get_stats
Daniel Mack [Thu, 22 Aug 2013 11:47:00 +0000 (13:47 +0200)]
net: ethernet: davinci_cpdma: export cpdma_chan_get_stats

This is needed when the cpsw driver is built as module.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: tcp_probe: add IPv6 support
Daniel Borkmann [Wed, 21 Aug 2013 17:48:00 +0000 (19:48 +0200)]
net: tcp_probe: add IPv6 support

The tcp_probe currently only supports analysis of IPv4 connections.
Therefore, it would be nice to have IPv6 supported as well. Since we
have the recently added %pISpc specifier that is IPv4/IPv6 generic,
build related sockaddress structures from the flow information and
pass this to our format string. Tested with SSH and HTTP sessions
on IPv4 and IPv6.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: tcp_probe: kprobes: adapt jtcp_rcv_established signature
Daniel Borkmann [Wed, 21 Aug 2013 17:47:59 +0000 (19:47 +0200)]
net: tcp_probe: kprobes: adapt jtcp_rcv_established signature

This patches fixes a rather unproblematic function signature mismatch
as the const specifier was missing for the th variable; and next to
that it adds a build-time assertion so that future function signature
mismatches for kprobes will not end badly, similarly as commit 22222997
("net: sctp: add build check for sctp_sf_eat_sack_6_2/jsctp_sf_eat_sack")
did it for SCTP.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: tcp_probe: also include rcv_wnd next to snd_wnd
Daniel Borkmann [Wed, 21 Aug 2013 17:47:58 +0000 (19:47 +0200)]
net: tcp_probe: also include rcv_wnd next to snd_wnd

It is helpful to sometimes know the TCP window sizes of an established
socket e.g. to confirm that window scaling is working or to tweak the
window size to improve high-latency connections, etc etc. Currently the
TCP snooper only exports the send window size, but not the receive window
size. Therefore, also add the receive window size to the end of the
output line.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec...
David S. Miller [Thu, 22 Aug 2013 23:04:41 +0000 (16:04 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next

Steffen Klassert says:

====================
1) Some constifications, from Mathias Krause.

2) Catch bugs if a hold timer is still active when xfrm_policy_destroy()
   is called, from Fan Du.

3) Remove a redundant address family checking, from Fan Du.

4) Make xfrm_state timer monotonic to be independent of system clock changes,
   from Fan Du.

5) Remove an outdated comment on returning -EREMOTE in the xfrm_lookup(),
   from Rami Rosen.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoethernet: broadcom: remove unnecessary platform_set_drvdata()
Jingoo Han [Thu, 22 Aug 2013 01:57:20 +0000 (10:57 +0900)]
ethernet: broadcom: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoethernet: moxa: remove unnecessary platform_set_drvdata()
Jingoo Han [Thu, 22 Aug 2013 01:55:21 +0000 (10:55 +0900)]
ethernet: moxa: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotcp: increase throughput when reordering is high
Yuchung Cheng [Thu, 22 Aug 2013 00:29:23 +0000 (17:29 -0700)]
tcp: increase throughput when reordering is high

The stack currently detects reordering and avoid spurious
retransmission very well. However the throughput is sub-optimal under
high reordering because cwnd is increased only if the data is deliverd
in order. I.e., FLAG_DATA_ACKED check in tcp_ack().  The more packet
are reordered the worse the throughput is.

Therefore when reordering is proven high, cwnd should advance whenever
the data is delivered regardless of its ordering. If reordering is low,
conservatively advance cwnd only on ordered deliveries in Open state,
and retain cwnd in Disordered state (RFC5681).

Using netperf on a qdisc setup of 20Mbps BW and random RTT from 45ms
to 55ms (for reordering effect). This change increases TCP throughput
by 20 - 25% to near bottleneck BW.

A special case is the stretched ACK with new SACK and/or ECE mark.
For example, a receiver may receive an out of order or ECN packet with
unacked data buffered because of LRO or delayed ACK. The principle on
such an ACK is to advance cwnd on the cummulative acked part first,
then reduce cwnd in tcp_fastretrans_alert().

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoSolutionEngine7724: fix typo in Ether platform data
Sergei Shtylyov [Wed, 21 Aug 2013 22:18:30 +0000 (02:18 +0400)]
SolutionEngine7724: fix typo in Ether platform data

Commit bd61224b1cbec096694e89c4187119c8576fe186 (SolutionEngine7724: fix Ether
support) has a typo in the 'phy_interface' field name of the platform data which
causes build error -- fix it.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoSH7619: fix typo in Ether platform data
Sergei Shtylyov [Wed, 21 Aug 2013 22:17:25 +0000 (02:17 +0400)]
SH7619: fix typo in Ether platform data

Commit 06a64f91da72cb5827e2bedef2ead60a123fd66e (SH7619: fix Ether support)  has
a typo in the 'phy_interface' field name of the platform data which causes build
error -- fix it.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agor8169: fix invalid register dump
Peter Wu [Wed, 21 Aug 2013 21:17:11 +0000 (23:17 +0200)]
r8169: fix invalid register dump

For some reason, my PCIe RTL8111E onboard NIC on a GA-Z68X-UD3H-B3
motherboard reads as FFs when reading from MMIO with a block size
larger than 7. Therefore change to reading blocks of four bytes.

Ben Hutchings noted that the buffer is large enough to hold all
registers, so now all registers are read.

Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Thu, 22 Aug 2013 20:00:46 +0000 (13:00 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to igb and e1000e.

Akeem provides 3 igb patches, the first resets the link when EEE is enabled
or disabled if the link is up.  His second patch changes a register read
which normally stores of the read value to "just-read" so that hardware
can accurately latch the register read.  Lastly, he adds rcu_lock to avoid
a possible race condition with igb_update_stats function.

Mitch provides a fix for SR-IOV, where MSI-X interrupts are required, so
make sure that MSI-X is enabled before allowing the user to turn on SR-IOV.

Alex's igb patch make it so that we limit the lower bound for max_frame_size
to the size of a standard Ethernet frame.  This allows for feature parity
with other Intel based drivers such as ixgbe.

Carolyn adds a SKU for a flashless i210 device and a fix for get_fw_version()
so that it works for all parts for igb.  In addition, she has 2 igb patches
to refactor NVM code to accommodate devices with no flash.  Lastly, she
adds code to check for the failure of pci_disable_link_state() to attempt
to work around a problem found with some systems.

Laura provides the remaining 2 igb patches.  One removing the hard-coded
value for the size of the RETA indirection table, and creates a macro instead
for the RETA indirection table.  The second adds the ethtool callbacks
necessary to change the RETA indirection table from userspace.

Bruce fixes a whitespace issue in a recent commit and resolves a jiffies
comparison warning by using time_after().

Li provides a fix for e1000e to avoid a kernel crash on shutdown by adding
one more check in e1000e_shutdown().  This is due to e1000e_shutdown()
trying to clear correctable errors on the upstream P2P bridge, when under
some cases we do not have the upstream P2P bridge.

v2:
 - fixed patch 11 conditional statement from < to <= based on feedback
   from Ben Hutchings
 - fixed patch 12 patch description (adding the commit summary) based
   on feedback from Sergei Shtylyov
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoe1000e: resolve checkpatch JIFFIES_COMPARISON warning
Bruce Allan [Thu, 15 Aug 2013 03:43:24 +0000 (03:43 +0000)]
e1000e: resolve checkpatch JIFFIES_COMPARISON warning

WARNING:JIFFIES_COMPARISON: Comparing jiffies is almost always wrong;
prefer time_after, time_before and friends

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: Avoid kernel crash during shutdown
Li Zhang [Tue, 13 Aug 2013 18:42:58 +0000 (18:42 +0000)]
e1000e: Avoid kernel crash during shutdown

While doing shutdown on the PCI device, the corresponding callback
function e1000e_shutdown() is trying to clear those correctable
errors on the upstream P2P bridge. Unfortunately, we don't have
the upstream P2P bridge under some cases (e.g. PCI-passthrou for
KVM on Power). That leads to kernel crash eventually.

The patch adds one more check on that to avoid kernel crash.

Signed-off-by: Li Zhang <zhlcindy@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: Add code to check for failure of pci_disable_link_state call
Carolyn Wyborny [Sat, 3 Aug 2013 01:53:54 +0000 (01:53 +0000)]
e1000e: Add code to check for failure of pci_disable_link_state call

This patch attempts to work around a problem found with some systems where
the call to pci_diable_link_state_locked() fails.  As a result, ASPM is not,
in fact, disabled.  Changing disable ASPM code to check if state actually
is disabled after the call and, if not, try another way to disable it.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Acked-by: Bruce W. Allan <bruce.w.allan@intel.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: cleanup whitespace in recent commit
Bruce Allan [Fri, 2 Aug 2013 03:33:32 +0000 (03:33 +0000)]
e1000e: cleanup whitespace in recent commit

Commit (c96ddb0b e1000e: Use marco instead of digit for defining
e1000_rx_desc_packet_split) moved a define from one file to another but
missed using proper indentation/whitespace.

CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Expose RSS indirection table for ethtool
Laura Mihaela Vasilescu [Wed, 31 Jul 2013 20:19:54 +0000 (20:19 +0000)]
igb: Expose RSS indirection table for ethtool

This patch adds the ethtool callbacks necessary to change the RETA
indirection table from userspace.

In order to achieve this, we add the indirection table field (rss_indir_tbl)
in the board specific data structure (struct igb_adapter) to preserve the
values across hardware resets.

The indirection table must be initialized with default values in the
following cases:
* at module init time
* when the number of RX queues changes.
For this reason we add a new field (rss_indir_tbl_init) in igb_adapter
that keeps track of the number of RX queues. Whenever the number of RX
queues changes, the rss_indir_tbl is modified and initialized with default
values. The rss_indir_tbl_init is updated accordingly.

CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Add macro for size of RETA indirection table
Laura Mihaela Vasilescu [Wed, 31 Jul 2013 20:19:48 +0000 (20:19 +0000)]
igb: Add macro for size of RETA indirection table

RETA indirection table is used to assign the received data to a CPU
in order to maintain an efficient distribution of network receive
processing across multiple CPUs.

This patch removes the hard-coded value for the size of the indirection
table and defines a new macro.

Signed-off-by: Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Fix get_fw_version function for all parts
Carolyn Wyborny [Tue, 16 Jul 2013 19:25:33 +0000 (19:25 +0000)]
igb: Fix get_fw_version function for all parts

This patch fixes issues found with older parts and older NVM tools in the
display of the version in ethtool.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Add device support for flashless SKU of i210 device
Carolyn Wyborny [Tue, 16 Jul 2013 19:18:36 +0000 (19:18 +0000)]
igb: Add device support for flashless SKU of i210 device

This patch adds the specific device id support for versions of i210 that do
not have flash installed.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Refactor NVM read functions to accommodate devices with no flash
Carolyn Wyborny [Wed, 17 Jul 2013 19:02:53 +0000 (19:02 +0000)]
igb: Refactor NVM read functions to accommodate devices with no flash

This patch refactors NVM read functions in order to accommodate i210 devices
that do not have a flash.  Previously, this was not supported on i210
devices.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Refactor of init_nvm_params
Carolyn Wyborny [Tue, 16 Jul 2013 19:17:32 +0000 (19:17 +0000)]
igb: Refactor of init_nvm_params

This patch refactors the init_nvm_params functions for 82575 and adds a new
function for the i210/i211 devices in order to configure separately the NVM
functionality for the i210/i211 family.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Update MTU so that it is always at least a standard frame size
Alexander Duyck [Tue, 16 Jul 2013 00:20:34 +0000 (00:20 +0000)]
igb: Update MTU so that it is always at least a standard frame size

This change makes it so that we limit the lower bound for max_frame_size to
the size of a standard Ethernet frame.  This allows for feature parity with
other Intel based drivers such as ixgbe.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: don't allow SR-IOV without MSI-X
Mitch A Williams [Thu, 20 Jun 2013 06:03:36 +0000 (06:03 +0000)]
igb: don't allow SR-IOV without MSI-X

MSI-X interrupts are required for SR-IOV operation. Check to make sure
they're enabled before allowing the user to turn on VFs.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Added rcu_lock to avoid race
Akeem G Abodunrin [Thu, 27 Jun 2013 09:10:23 +0000 (09:10 +0000)]
igb: Added rcu_lock to avoid race

This patch adds rcu_lock to avoid possible race condition with igb_update_stats
function accessing the rings in free_ q_vector.

CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Read register for latch_on without return value
Akeem G Abodunrin [Thu, 6 Jun 2013 01:31:09 +0000 (01:31 +0000)]
igb: Read register for latch_on without return value

This patch changes register read to "just-read" without returning a value
for hardware to accurately latch the register value.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoigb: Reset the link when EEE setting changed
Akeem G Abodunrin [Fri, 24 May 2013 07:20:57 +0000 (07:20 +0000)]
igb: Reset the link when EEE setting changed

This patch resets the link, if link is up - whenever users enable or disable EEE

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agocan: flexcan: use platform_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 10:15:08 +0000 (18:15 +0800)]
can: flexcan: use platform_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_set_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: at91_can: use platform_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 10:15:03 +0000 (18:15 +0800)]
can: at91_can: use platform_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_set_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: c_can: fix error checking of priv->instance in probe()
Chen Gang [Wed, 21 Aug 2013 09:09:33 +0000 (17:09 +0800)]
can: c_can: fix error checking of priv->instance in probe()

This patch adds a type cast from 'unsigned int' to 'int'.

'priv->instance' may less than zero, so need a type cast, the related
warnings (allmodconfig, "EXTRA_CFLAGS=-W"):

  drivers/net/can/c_can/c_can_platform.c:198:3: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agonet: phy: mdio-octeon: use platform_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 10:15:15 +0000 (18:15 +0800)]
net: phy: mdio-octeon: use platform_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_set_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: irda: pxaficp_ir: use platform_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 10:15:11 +0000 (18:15 +0800)]
net: irda: pxaficp_ir: use platform_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using deva_set_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next
David S. Miller [Thu, 22 Aug 2013 03:46:16 +0000 (20:46 -0700)]
Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next

Marc Kleine-Budde says:

====================
this pull-request for net-next consists of a series by Alexander
Shiyan, he cleans up the mcp251x driver. As the first patch touches
arch/arm/mach-pxa, it's acked by Haojian Zhuang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agostmmac: remove useless csum flag
Giuseppe CAVALLARO [Wed, 21 Aug 2013 07:11:14 +0000 (09:11 +0200)]
stmmac: remove useless csum flag

This patch removes the no_csum_insertion private parameter that is not used anymore
and, also,  the "likely" annotation from the condition that is not in a critical path.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: emac: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:45 +0000 (15:02 +0800)]
net: emac: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: davinci_mdio: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:41 +0000 (15:02 +0800)]
net: davinci_mdio: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: xilinx_emaclite: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:36 +0000 (15:02 +0800)]
net: xilinx_emaclite: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sunhme: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:31 +0000 (15:02 +0800)]
net: sunhme: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sunbmac: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:27 +0000 (15:02 +0800)]
net: sunbmac: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: fec_mpc52xx_phy: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:22 +0000 (15:02 +0800)]
net: fec_mpc52xx_phy: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: ucc_geth: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:18 +0000 (15:02 +0800)]
net: ucc_geth: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: fsl_pq_mdio: remove unnecessary dev_set_drvdata()
Libo Chen [Wed, 21 Aug 2013 07:02:13 +0000 (15:02 +0800)]
net: fsl_pq_mdio: remove unnecessary dev_set_drvdata()

Unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'tuntap'
David S. Miller [Wed, 21 Aug 2013 19:21:50 +0000 (12:21 -0700)]
Merge branch 'tuntap'

Pavel Emelyanov says:

====================
tun: Some bits required for tun's checkpoint-restore (v2)

After taking a closer look on tun checkpoint-restore I've found several
issues with the tun's API that make it impossible to dump and restore
the state of tun device and attached tun-files.

The proposed API changes are all about extending the existing ioctl-based
stuff. Patches fit today's net-next.

This v2 has David's comments about patch #1 fixed. All the rest is the same.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotun: Get skfilter layout
Pavel Emelyanov [Wed, 21 Aug 2013 10:32:39 +0000 (14:32 +0400)]
tun: Get skfilter layout

The only thing we may have from tun device is the fprog, whic contains
the number of filter elements and a pointer to (user-space) memory
where the elements are. The program itself may not be available if the
device is persistent and detached.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotun: Allow to skip filter on attach
Pavel Emelyanov [Wed, 21 Aug 2013 10:32:21 +0000 (14:32 +0400)]
tun: Allow to skip filter on attach

There's a small problem with sk-filters on tun devices. Consider
an application doing this sequence of steps:

fd = open("/dev/net/tun");
ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" });
ioctl(fd, TUNATTACHFILTER, &my_filter);
ioctl(fd, TUNSETPERSIST, 1);
close(fd);

At that point the tun0 will remain in the system and will keep in
mind that there should be a socket filter at address '&my_filter'.

If after that we do

fd = open("/dev/net/tun");
ioctl(fd, TUNSETIFF, { .ifr_name = "tun0" });

we most likely receive the -EFAULT error, since tun_attach() would
try to connect the filter back. But (!) if we provide a filter at
address &my_filter, then tun0 will be created and the "new" filter
would be attached, but application may not know about that.

This may create certain problems to anyone using tun-s, but it's
critical problem for c/r -- if we meet a persistent tun device
with a filter in mind, we will not be able to attach to it to dump
its state (flags, owner, address, vnethdr size, etc.).

The proposal is to allow to attach to tun device (with TUNSETIFF)
w/o attaching the filter to the tun-file's socket. After this
attach app may e.g clean the device by dropping the filter, it
doesn't want to have one, or (in case of c/r) get information
about the device with tun ioctls.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotun: Report whether the queue is attached or not
Pavel Emelyanov [Wed, 21 Aug 2013 10:32:00 +0000 (14:32 +0400)]
tun: Report whether the queue is attached or not

Multiqueue tun devices allow to attach and detach from its queues
while keeping the interface itself set on file.

Knowing this is critical for the checkpoint part of criu project.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotun: Add ability to create tun device with given index
Pavel Emelyanov [Wed, 21 Aug 2013 10:31:38 +0000 (14:31 +0400)]
tun: Add ability to create tun device with given index

Tun devices cannot be created with ifidex user wants, but it's
required by checkpoint-restore project.

Long time ago such ability was implemented for rtnl_ops-based
interface for creating links (9c7dafbf net: Allow to create links
with given ifindex), but the only API for creating and managing
tuntap devices is ioctl-based and is evolving with adding new ones
(cde8b15f tuntap: add ioctl to attach or detach a file form tuntap
device).

Following that trend, here's how a new ioctl that sets the ifindex
for device, that _will_ be created by TUNSETIFF ioctl looks like.
So those who want a tuntap device with the ifindex N, should open
the tun device, call ioctl(fd, TUNSETIFINDEX, &N), then call TUNSETIFF.
If the index N is busy, then the register_netdev will find this out
and the ioctl would be failed with -EBUSY.

If setifindex is not called, then it will be generated as before.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Reduce scope of local variables in mlx4_en_xmit
Amir Vadai [Wed, 21 Aug 2013 07:08:59 +0000 (10:08 +0300)]
net/mlx4_en: Reduce scope of local variables in mlx4_en_xmit

Some variables could have their scope reduced.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Fix handling of dma_map failure
Amir Vadai [Wed, 21 Aug 2013 07:08:58 +0000 (10:08 +0300)]
net/mlx4_en: Fix handling of dma_map failure

Result of skb_frag_dma_map() and dma_map_single() wasn't checked.
Added a check and proper handling in case of failure.
Moved the mapping to the beginning of mlx4_en_xmit(), before updating
the ring data structure to make error handling easier.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Notify user when TX ring in error state
Amir Vadai [Wed, 21 Aug 2013 07:08:57 +0000 (10:08 +0300)]
net/mlx4_en: Notify user when TX ring in error state

When hardware gets into error state, must notify user about it.
When QP in error state no traffic will be tx'ed from the attached
tx_ring.

Driver should know how to recover from this unexpected state. I will send later
on the recovery flow, but having the print shouldn't be delayed.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Disable global flow control when PFC enabled
Eugenia Emantayev [Wed, 21 Aug 2013 07:08:56 +0000 (10:08 +0300)]
net/mlx4_en: Disable global flow control when PFC enabled

Fix a bug when FC and PFC are enabled/disabled at the same time.
According to ConnectX-3 Programmer Manual these two features are mutial
exclusive.  So make sure when enabling PFC to turn off global FC and
vise versa.  Otherwise it hurts the performance.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Coding style cleanup in mlx4_en_dcbnl_ieee_setpfc()
Amir Vadai [Wed, 21 Aug 2013 07:08:55 +0000 (10:08 +0300)]
net/mlx4_en: Coding style cleanup in mlx4_en_dcbnl_ieee_setpfc()

Fix some coding style issues in this function.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Update version to 5.3.48
Himanshu Madhani [Wed, 21 Aug 2013 15:24:14 +0000 (11:24 -0400)]
qlcnic: Update version to 5.3.48

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Implement ndo_get_phys_port_id for 82xx adapter
Shahed Shaikh [Wed, 21 Aug 2013 15:24:13 +0000 (11:24 -0400)]
qlcnic: Implement ndo_get_phys_port_id for 82xx adapter

Each function driver instance uses the MAC address of the
lowest function belonging to that physical port as a unique
port identifier. This port identifier is read and cached in
driver during probe and provided to user space through
ndo_get_phys_port_id()

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Enable diagnostic test for multiple Tx queues.
Himanshu Madhani [Wed, 21 Aug 2013 15:24:12 +0000 (11:24 -0400)]
qlcnic: Enable diagnostic test for multiple Tx queues.

o Enable diagnostic test via ethtool and QConvergeConsole
  application when Multiple Tx queues are enabled on 82xx
  series adapters.

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter.
Himanshu Madhani [Wed, 21 Aug 2013 15:24:11 +0000 (11:24 -0400)]
qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter.

o using ethtool {set|get}_channel option, user can change number
  of Tx queues for 82xx Series adapter.
o updated ethtool -S <ethX> option to display stats from each Tx queue.

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Multi Tx queue support for 82xx Series adapter.
Himanshu Madhani [Wed, 21 Aug 2013 15:24:10 +0000 (11:24 -0400)]
qlcnic: Multi Tx queue support for 82xx Series adapter.

o  82xx firmware allows support for multiple Tx queues. This
   patch will enable multi Tx queue support for 82xx series
   adapter. Max number of Tx queues supported will be 8.

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agocan: mcp251x: Allow tuning SPI mode and limit maximal SPI speed
Alexander Shiyan [Mon, 19 Aug 2013 11:39:21 +0000 (15:39 +0400)]
can: mcp251x: Allow tuning SPI mode and limit maximal SPI speed

Patch allow to use different mode settings for SPI (MODE3 for example)
and limit maximal speed according to IC datasheet.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: mcp251x: Eliminate irq_flags from driver platform_data
Alexander Shiyan [Mon, 19 Aug 2013 11:39:20 +0000 (15:39 +0400)]
can: mcp251x: Eliminate irq_flags from driver platform_data

Flags is not used by boards, so remove this field from the driver
platform_data.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: mcp251x: Replace power callbacks with regulator API
Alexander Shiyan [Mon, 19 Aug 2013 11:39:19 +0000 (15:39 +0400)]
can: mcp251x: Replace power callbacks with regulator API

This patch replaces power callbacks to the regulator API. To improve
the readability of the code, helper for the regulator enable/disable
was added.

Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agonet/phy: micrel: Add OF configuration support for ksz9021
Sean Cross [Wed, 21 Aug 2013 01:46:12 +0000 (01:46 +0000)]
net/phy: micrel: Add OF configuration support for ksz9021

Some boards require custom PHY configuration, for example due to trace
length differences.  Add the ability to configure these registers in
order to get the PHY to function on boards that need it.

Because PHYs are auto-detected based on MDIO device IDs, allow PHY
configuration to be specified in the parent Ethernet device node if no
PHY device node is present.

Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: ipv6: mcast: minor: use defines for rfc3810/8.1 lengths
Daniel Borkmann [Tue, 20 Aug 2013 10:22:02 +0000 (12:22 +0200)]
net: ipv6: mcast: minor: use defines for rfc3810/8.1 lengths

Instead of hard-coding length values, use a define to make it clear
where those lengths come from.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: ipv6: minor: *_start_timer: rather use unsigned long
Daniel Borkmann [Tue, 20 Aug 2013 10:22:01 +0000 (12:22 +0200)]
net: ipv6: minor: *_start_timer: rather use unsigned long

For the functions mld_gq_start_timer(), mld_ifc_start_timer(),
and mld_dad_start_timer(), rather use unsigned long than int
as we operate only on unsigned values anyway. This seems more
appropriate as there is no good reason to do type conversions
to int, that could lead to future errors.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: ipv6: igmp6_event_query: use msecs_to_jiffies
Daniel Borkmann [Tue, 20 Aug 2013 10:22:00 +0000 (12:22 +0200)]
net: ipv6: igmp6_event_query: use msecs_to_jiffies

Use proper API functions to calculate jiffies from milliseconds and
not the crude method of dividing HZ by a value. This ensures more
accurate values even in the case of strange HZ values. While at it,
also simplify code in the mlh2 case by using max().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: cpsw: Add support for wake-on-lan for cpsw
Matus Ujhelyi [Tue, 20 Aug 2013 05:59:38 +0000 (07:59 +0200)]
net: cpsw: Add support for wake-on-lan for cpsw

Some phy's can be configured to enable wake on lan (e.g. at803x or marvell 88E1318S).
There is no way how to enable wol on CPSW with such connected phys. This patch
adds this support. It is provided by calling the phy's related code.

Tested on board with at8030x connected phy. Wol interrupt line is
connected to GPIO0 on am335x.

Signed-off-by: Matus Ujhelyi <ujhelyi.m@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers: net: cpsw: remove platform data header file of cpsw
Mugunthan V N [Mon, 19 Aug 2013 12:17:40 +0000 (17:47 +0530)]
drivers: net: cpsw: remove platform data header file of cpsw

CPSW driver no longer supports platform register as all the SoCs which has CPSW
are supporting DT only booting, so moving cpsw.h header file from platform
include to drivers/net/ethernet/ti

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoip6_tunnel: ensure to always have a link local address
Nicolas Dichtel [Tue, 20 Aug 2013 10:16:06 +0000 (12:16 +0200)]
ip6_tunnel: ensure to always have a link local address

When an Xin6 tunnel is set up, we check other netdevices to inherit the link-
local address. If none is available, the interface will not have any link-local
address. RFC4862 expects that each interface has a link local address.

Now than this kind of tunnels supports x-netns, it's easy to fall in this case
(by creating the tunnel in a netns where ethernet interfaces stand and then
moving it to a other netns where no ethernet interface is available).

RFC4291, Appendix A suggests two methods: the first is the one currently
implemented, the second is to generate a unique identifier, so that we can
always generate the link-local address. Let's use eth_random_addr() to generate
this interface indentifier.

I remove completly the previous method, hence for the whole life of the
interface, the link-local address remains the same (previously, it depends on
which ethernet interfaces were up when the tunnel interface was set up).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoRevert "ipv6: fix checkpatch errors in net/ipv6/addrconf.c"
David S. Miller [Wed, 21 Aug 2013 06:44:39 +0000 (23:44 -0700)]
Revert "ipv6: fix checkpatch errors in net/ipv6/addrconf.c"

This reverts commit df8372ca747f6da9e8590775721d9363c1dfc87e.

These changes are buggy and make unintended semantic changes
to ip6_tnl_add_linklocal().

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobcm63xx_enet: replace devm_request_and_ioremap by devm_ioremap_resource
Julia Lawall [Mon, 19 Aug 2013 11:20:39 +0000 (13:20 +0200)]
bcm63xx_enet: replace devm_request_and_ioremap by devm_ioremap_resource

Use devm_ioremap_resource instead of devm_request_and_ioremap.

This was done using the semantic patch
scripts/coccinelle/api/devm_ioremap_resource.cocci

The relevant call to platform_get_resource was manually moved down to the
call to devm_ioremap_resource.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: davinci_mdio: use platform_{get,set}_drvdata()
Libo Chen [Mon, 19 Aug 2013 12:00:37 +0000 (20:00 +0800)]
net: davinci_mdio: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: xilinx_emaclite: use platform_{get,set}_drvdata()
Libo Chen [Mon, 19 Aug 2013 12:00:25 +0000 (20:00 +0800)]
net: xilinx_emaclite: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &of_dev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sunhme: use platform_{get,set}_drvdata()
Libo Chen [Mon, 19 Aug 2013 11:59:36 +0000 (19:59 +0800)]
net: sunhme: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &of->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sunbmac: use platform_{get,set}_drvdata()
Libo Chen [Mon, 19 Aug 2013 11:59:25 +0000 (19:59 +0800)]
net: sunbmac: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &of->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: fec_mpc52xx_phy: use platform_{get,set}_drvdata()
Libo Chen [Mon, 19 Aug 2013 11:59:16 +0000 (19:59 +0800)]
net: fec_mpc52xx_phy: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &of->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: ucc_geth: use platform_{get,set}_drvdata()
Libo Chen [Mon, 19 Aug 2013 11:59:09 +0000 (19:59 +0800)]
net: ucc_geth: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &ofdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: fsl_pq_mdio: use platform_{get,set}_drvdata()
Libo Chen [Mon, 19 Aug 2013 11:58:40 +0000 (19:58 +0800)]
net: fsl_pq_mdio: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosh_eth: remove 'register_type' field from 'struct sh_eth_plat_data'
Sergei Shtylyov [Sat, 17 Aug 2013 23:13:26 +0000 (03:13 +0400)]
sh_eth: remove 'register_type' field from 'struct sh_eth_plat_data'

Now that the 'register_type' field of the 'sh_eth' driver's platform data is not
used by the driver anymore, it's time to remove it and  its initializers from
the SH platform code. Also  move *enum* declaring values for this  field from
<linux/sh_eth.h>  to  the  local driver's  header file as they're only needed
by the driver itself  now...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosh_eth: get register layout from 'struct sh_eth_cpu_data'
Sergei Shtylyov [Sat, 17 Aug 2013 23:11:28 +0000 (03:11 +0400)]
sh_eth: get register layout from 'struct sh_eth_cpu_data'

The register layout is a SoC characteristic, so it's wrong that it's stored
in the otherwise board specific platform data. Add 'register_type' field to
'struct sh_eth_cpu_data', initialize it properly for each SoC, and read  it
from this structure instead of the platfrom data from now on...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoSolutionEngine7724: fix Ether support
Sergei Shtylyov [Sat, 17 Aug 2013 22:19:09 +0000 (02:19 +0400)]
SolutionEngine7724: fix Ether support

The Ether platform data is behind the declaration of 'struct sh_eth_plat_data'
as it's lacking the initializers for the 'register_type' and 'phy_interface'
fields -- it means they'll be implicitly and wrongly set to SH_ETH_REG_GIGABIT
and PHY_INTERFACE_MODE_NA. Initialize the fields explicitly and fix off-by-one
error in the Ether memory resource end, while at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoSH7619: fix Ether support
Sergei Shtylyov [Sat, 17 Aug 2013 22:15:42 +0000 (02:15 +0400)]
SH7619: fix Ether support

The 'sh_eth' driver's probe will crash as the platform code is hopelessly behind
the platform data -- it passes PHY ID instead of 'struct sh_eth_plat_data *'.
Strangely, both commit d88a3ea6fa4c (SH7619 add ethernet controler support) that
added the platform code and commit 71557a37adb5 ([netdrvr] sh_eth: Add  SH7619
support)  were done  in about  the same time, yet the latter one added 'struct
sh_eth_plat_data' and the platform code didn't ever get updated...

Add the proper platform data and fix off-by-one memory resource end error, while
at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipip: dereferencing an ERR_PTR in ip_tunnel_init_net()
Dan Carpenter [Mon, 19 Aug 2013 07:05:10 +0000 (10:05 +0300)]
ipip: dereferencing an ERR_PTR in ip_tunnel_init_net()

We need to move the derefernce after the IS_ERR() check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomyri10ge: Add support for ndo_busy_poll
Hyong-Youb Kim [Mon, 19 Aug 2013 09:02:19 +0000 (02:02 -0700)]
myri10ge: Add support for ndo_busy_poll

Add the ndo_busy_poll handler. Use skb_mark_napi_id to mark receive
packets with the napi id. For each slice, use per-slice spinlock and
state variable to ensure that only one handler processes receive
pacekts.

Locking, statistics counters, and the ndo_busy_poll handler follow
those in the ixgbe driver. So, credit goes to that driver's authors.

Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv4: raise IP_MAX_MTU to theoretical limit
Eric Dumazet [Mon, 19 Aug 2013 02:08:07 +0000 (19:08 -0700)]
ipv4: raise IP_MAX_MTU to theoretical limit

As discussed last year [1], there is no compelling reason
to limit IPv4 MTU to 0xFFF0, while real limit is 0xFFFF

[1] : http://marc.info/?l=linux-netdev&m=135607247609434&w=2

Willem raised this issue again because some of our internal
regression tests broke after lo mtu being set to 65536.

IP_MTU reports 0xFFF0, and the test attempts to send a RAW datagram of
mtu + 1 bytes, expecting the send() to fail, but it does not.

Alexey raised interesting points about TCP MSS, that should be addressed
in follow-up patches in TCP stack if needed, as someone could also set
an odd mtu anyway.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agovhost: Include linux/uio.h instead of linux/socket.h
Asias He [Mon, 19 Aug 2013 01:23:19 +0000 (09:23 +0800)]
vhost: Include linux/uio.h instead of linux/socket.h

memcpy_fromiovec is moved from net/core/iovec.c to lib/iovec.c.
linux/uio.h provides the declaration for memcpy_fromiovec.

Include linux/uio.h instead of inux/socket.h for it.

Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotcp: trivial: Remove nocache argument from tcp_v4_send_synack
Christoph Paasch [Sun, 18 Aug 2013 15:34:38 +0000 (17:34 +0200)]
tcp: trivial: Remove nocache argument from tcp_v4_send_synack

The nocache-argument was used in tcp_v4_send_synack as an argument to
inet_csk_route_req. However, since ba3f7f04ef2b (ipv4: Kill
FLOWI_FLAG_RT_NOCACHE and associated code.) this is no more used.

This patch removes the unsued argument from tcp_v4_send_synack.

Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agopch_gbe: ethtool cannot change parameters when link is down
Anders Larsen [Sun, 18 Aug 2013 09:54:40 +0000 (11:54 +0200)]
pch_gbe: ethtool cannot change parameters when link is down

When attempting to change e.g. the advertising mask when the link is down
ecmd->speed is -1 causing mii_ethtool_sset() to bail out.

This bug bit when connecting to a gigabit switch through a 4-pin (industrial)
cable, since link negotiation would not complete (both endpoints claimed to
be gigabit-capable, but this is not possible with only 4 pins).
Any attempt to fix this by setting autonegation to not offer 1000Mbps
failed as the setting would not be accepted while the link was still down...

Set ecmd->speed to SPEED_1000 to satisfy mii_ethtool_sset()
(the actual value of ecmd->speed doesn't matter as long as it is valid,
since a re-negotation is forced afterwards).

Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomoxa: fix missing unlock on error in moxart_mac_start_xmit()
Wei Yongjun [Sun, 18 Aug 2013 08:09:30 +0000 (16:09 +0800)]
moxa: fix missing unlock on error in moxart_mac_start_xmit()

Add the missing unlock before return from function moxart_mac_start_xmit()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosundance: Add myself as a maintainer
Denis Kirjanov [Sat, 17 Aug 2013 05:08:49 +0000 (09:08 +0400)]
sundance: Add myself as a maintainer

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosundance: Add netpoll support
Denis Kirjanov [Sat, 17 Aug 2013 05:08:48 +0000 (09:08 +0400)]
sundance: Add netpoll support

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: fix checkpatch errors in net/ipv6/addrconf.c
dingtianhong [Sat, 17 Aug 2013 02:27:15 +0000 (10:27 +0800)]
ipv6: fix checkpatch errors in net/ipv6/addrconf.c

ERROR: code indent should use tabs where possible: fix 2.
ERROR: do not use assignment in if condition: fix 5.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: convert the uses of ADBG and remove the superfluous parentheses
dingtianhong [Sat, 17 Aug 2013 02:27:04 +0000 (10:27 +0800)]
ipv6: convert the uses of ADBG and remove the superfluous parentheses

Just follow the Joe Perches's opinion, it is a better way to fix the
style errors.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agovxlan: using kfree_rcu() to simplify the code
Wei Yongjun [Fri, 16 Aug 2013 23:32:09 +0000 (07:32 +0800)]
vxlan: using kfree_rcu() to simplify the code

The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>