Peter Ujfalusi [Thu, 22 Sep 2016 11:07:03 +0000 (14:07 +0300)]
drm/omap: Replace struct omap_video_timings with videomode
omap_video_timings can be replaced with the generic videomode in omapdrm
and the omap_video_timings can be removed.
This patch will replace the omap_video_timings with videomode.
With the change we no longer need the functions to convert to/from
videomode and drm_display_mode to omap_video_timings, these can be removed
as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Peter Ujfalusi [Thu, 22 Sep 2016 11:07:02 +0000 (14:07 +0300)]
drm/omap: Change the types of struct omap_video_timings members
omap_video_timings struct have the same members as struct videomode, but
their types are different. As first step change the types of the
omap_video_timings struct members to match their counterpart in
struct videomode to catch any type cast related issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Peter Ujfalusi [Thu, 22 Sep 2016 10:35:26 +0000 (13:35 +0300)]
video: of: display_timing: Add support for syncclk-active property
Configure the DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE flags according to the
binding document.
If the syncclk-active is present in DT, configure the flags accordingly, if
it is omitted it means that the SYNC edge is following the pixdata
configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Peter Ujfalusi [Thu, 22 Sep 2016 10:35:25 +0000 (13:35 +0300)]
video: display_timing: Add flags to select the edge when the sync is driven
The sync can be - and for some panels it must be - driven on different edge
then the data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Peter Ujfalusi [Thu, 22 Sep 2016 10:35:24 +0000 (13:35 +0300)]
dt-bindings: display: display-timing: Add property to configure sync drive edge
There are display panels which demands that the sync signal is driven on
different edge than the pixel data.
With the syncclk-active property we can specify the clk edge to be used to
drive the sync signal. When the property is missing it indicates that the
sync is driven on the same edge as the pixel data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tomi Valkeinen [Fri, 10 Jun 2016 09:44:31 +0000 (12:44 +0300)]
drm/omap: print error instead of WARN() if plane setup fails
omap_plane_atomic_update() does WARN_ON() if dispc rejects the given
plane config. Change that to dev_err() to lessen the possible spam.
To fix this correctly, the plane setup needs much more work by creating
a check function for dispc setup, so that we could reliably check the
config in atomic_check, instead of only noticing the problem when
programming dispc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Dave Airlie [Fri, 28 Oct 2016 04:24:56 +0000 (14:24 +1000)]
Merge branch 'linux-4.9' of git://github.com/skeggsb/linux into drm-next
Karol's work which greatly improves volt/clock changes on a
heap of boards, nothing too exciting beyond a random collection of fixes.
* 'linux-4.9' of git://github.com/skeggsb/linux: (33 commits)
drm/nouveau/fb/nv50: defer DMA mapping of scratch page to oneinit() hook
drm/nouveau/fb/gf100: defer DMA mapping of scratch page to oneinit() hook
drm/nouveau/pci: set streaming DMA mask early
drm/nouveau/kms: add Maxwell to backlight initialization
drm/nouveau/bar/nv50: fix bar2 vm size
drm/nouveau/disp: remove unused function in sorg94.c
drm/nouveau/volt: use kernel's 64-bit signed division function
drm/nouveau/core: add missing header dependencies
drm/nouveau/gr/nv3x: add 0x0597 kelvin 3d class support
drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo
drm/nouveau/fb/ram: Use Kepler implementation on Maxwell
drm/nouveau/volt: Make use of cvb coefficients
drm/nouveau/volt/gf100-: Add speedo
drm/nouveau/volt: Add implementation for gf100
drm/nouveau/bios/vmap: unk0 field is the mode
drm/nouveau/volt: Don't require perfect fit
drm/nouveau/clk: Allow boosting only when NvBoost is set
drm/nouveau/bios: Add parsing of VPSTATE table
drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog
drm/nouveau/clk: Fixup cstate selection
...
Dave Airlie [Fri, 28 Oct 2016 01:33:52 +0000 (11:33 +1000)]
Merge tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next
Pull request already again to get the s/fence/dma_fence/ stuff in and
allow everyone to resync. Otherwise really just misc stuff all over, and a
new bridge driver.
* tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/bridge: fix platform_no_drv_owner.cocci warnings
drm/bridge: fix semicolon.cocci warnings
drm: Print some debug/error info during DP dual mode detect
drm: mark drm_of_component_match_add dummy inline
drm/bridge: add Silicon Image SiI8620 driver
dt-bindings: add Silicon Image SiI8620 bridge bindings
video: add header file for Mobile High-Definition Link (MHL) interface
drm: convert DT component matching to component_match_add_release()
dma-buf: Rename struct fence to dma_fence
dma-buf/fence: add an lockdep_assert_held()
drm/dp: Factor out helper to distinguish between branch and sink devices
drm/edid: Only print the bad edid when aborting
drm/msm: add missing header dependencies
drm/msm/adreno: move function declarations to header file
drm/i2c/tda998x: mark symbol static where possible
doc: add missing docbook parameter for fence-array
drm: RIP mode_config->rotation_property
drm/msm/mdp5: Advertize 180 degree rotation
drm/msm/mdp5: Use per-plane rotation property
Dave Airlie [Fri, 28 Oct 2016 00:35:59 +0000 (10:35 +1000)]
Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-next
First new feature pull for 4.10. Highlights:
- Support for multple virtual displays in the virtual dce component
- New VM mgr to support non-contiguous vram buffers
- Support for UVD powergating on additional asics
- Power management improvements
- lots of code cleanup and bug fixes
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (107 commits)
drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI
drm/amdgpu: disable dpm before turn off clock when vce idle.
drm/amdgpu: enable uvd bypass mode for CI/VI.
drm/amdgpu: just not load smc firmware if smu is already running
drm/amdgpu: when suspend, set boot state instand of disable dpm.
drm/amdgpu: use failed label to handle context init failure
drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback
drm/ttm: make eviction decision a driver callback v2
drm/ttm: fix coding style in ttm_bo_driver.h
drm/radeon/pm: autoswitch power state when in balanced mode
drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks
drm/amdgpu:new ids flag for preempt
drm/amdgpu: mark symbols static where possible
drm/amdgpu: change function declarations and add missing header dependencies
drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code
drm/amdgpu/atom: remove a bunch of unused functions
drm/amdgpu: consolidate atom scratch reg handling for hangs
drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb
drm/amdgpu: add VCE VM session tracking
drm/amdgpu: improve parse_cs handling a bit
...
Rex Zhu [Wed, 26 Oct 2016 09:05:30 +0000 (17:05 +0800)]
drm/amdgpu: disable dpm before turn off clock when vce idle.
v2: move return value check as well
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 26 Oct 2016 09:04:33 +0000 (17:04 +0800)]
drm/amdgpu: enable uvd bypass mode for CI/VI.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 26 Oct 2016 05:44:12 +0000 (13:44 +0800)]
drm/amdgpu: just not load smc firmware if smu is already running
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 3 Oct 2016 12:46:36 +0000 (20:46 +0800)]
drm/amdgpu: when suspend, set boot state instand of disable dpm.
fix pm-hibernate bug, when suspend/resume, dpm start failed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Imre Deak [Wed, 26 Oct 2016 16:29:19 +0000 (19:29 +0300)]
drm: Print some debug/error info during DP dual mode detect
There's at least one LSPCON device that occasionally returns an unexpected
adaptor ID which leads to a failed detect. Print some debug info to help
debugging this and future cases. Also print an error for an unexpected
adaptor ID, so users can report it.
v2:
- s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor
IDs. (Ville)
Arnd Bergmann [Wed, 26 Oct 2016 08:57:47 +0000 (10:57 +0200)]
drm: mark drm_of_component_match_add dummy inline
The newly added drm_of_component_match_add helper is defined as
'static' in a header when CONFIG_OF is disabled, causing a warning
each time the header is included:
In file included from /git/arm-soc/drivers/gpu/drm/bridge/dw-hdmi.c:23:0:
include/drm/drm_of.h:33:13: error: 'drm_of_component_match_add' defined but not used [-Werror=unused-function]
This marks it 'inline' like the other such helpers in this file.
Andrzej Hajda [Mon, 10 Oct 2016 07:39:17 +0000 (09:39 +0200)]
drm/bridge: add Silicon Image SiI8620 driver
SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.
This way we can correctly check split VRAM buffers as well.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 30 Aug 2016 15:26:04 +0000 (17:26 +0200)]
drm/ttm: make eviction decision a driver callback v2
This way the driver can decide if it is valuable to evict a BO or not.
The current implementation is added as default to all existing drivers.
v2: fix some typos found during internal testing
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 30 Aug 2016 13:01:27 +0000 (15:01 +0200)]
drm/ttm: fix coding style in ttm_bo_driver.h
A few 80chars issues and spaces at wrong places.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lucas Stach [Sat, 22 Oct 2016 23:05:33 +0000 (01:05 +0200)]
drm/radeon/pm: autoswitch power state when in balanced mode
The current default of always using the performance power state leads
to increased power consumption of mobile devices, which have a dedicated
battery power state. Switch between the performance and battery power
state automatically, dpending on the current AC power status, when the
user asked for the balanced power state.
The user can still override this logic by asking for the performance
or battery power state explicitly.
Tested-by: Michel Dänzer <michel.daenzer@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Mon, 24 Oct 2016 23:14:12 +0000 (00:14 +0100)]
drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks
Fix trivial spelling mistake cant't -> can't and add KERN_WARNING to
printk messages. Remove redundant spaces before \n too (thanks to
Joe Perches for spotting those).
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 24 Oct 2016 03:36:17 +0000 (11:36 +0800)]
drm/amdgpu:new ids flag for preempt
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Baoyou Xie [Sat, 22 Oct 2016 08:48:26 +0000 (16:48 +0800)]
drm/amdgpu: mark symbols static where possible
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/si.c:908:5: warning: no previous prototype for 'si_pciep_rreg' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/si.c:921:6: warning: no previous prototype for 'si_pciep_wreg' [-Wmissing-prototypes]
In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Baoyou Xie [Sat, 22 Oct 2016 08:48:25 +0000 (16:48 +0800)]
drm/amdgpu: change function declarations and add missing header dependencies
We get a few warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/atombios_crtc.c:38:6: warning: no previous prototype for 'amdgpu_atombios_crtc_overscan_setup' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:661:6: warning: no previous prototype for 'dce_v8_0_disable_dce' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:40:5: warning: no previous prototype for 'amdgpu_gfx_scratch_get' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:62:6: warning: no previous prototype for 'amdgpu_gfx_scratch_free' [-Wmissing-prototypes]
....
In fact, these functions are declared in
drivers/gpu/drm/amd/amdgpu/atombios_crtc.h
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
drivers/gpu/drm/amd/amdgpu/dce_v8_0.h
drivers/gpu/drm/amd/amdgpu/dce_v10_0.h
drivers/gpu/drm/amd/amdgpu/dce_v11_0.h
drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h.
So this patch adds missing header dependencies.
By the way, this patch changes declaration of amdgpu_gfx_parse_disable_cu()
to subject to its implement, and clean three function declarations
in pp_acpi.h up.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 21 Oct 2016 19:54:18 +0000 (15:54 -0400)]
drm/amdgpu/atom: remove a bunch of unused functions
Leftovers from the radeon.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 21 Oct 2016 19:30:36 +0000 (15:30 -0400)]
drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb
Rather than open coding it.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 10 Oct 2016 13:23:32 +0000 (15:23 +0200)]
drm/amdgpu: add VCE VM session tracking
Fix the problems with killing VCE sessions in VM mode.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 14:49:19 +0000 (16:49 +0200)]
drm/amdgpu: improve parse_cs handling a bit
This way we can use parse_cs and still keep VM mode enabled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Fri, 14 Oct 2016 14:50:46 +0000 (10:50 -0400)]
drm/amd/amdgpu: Put in rest of wave fields
Add the rest of the basic SQ WAVE fields to
finish off the implementation. Eventually,
a separate interface will be needed for GPRs.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Fri, 14 Oct 2016 13:49:09 +0000 (09:49 -0400)]
drm/amd/amdgpu: re-factor debugfs wave reader
Move IP version specific code into a callback.
Also add support for gfx7 devices.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Mon, 10 Oct 2016 11:31:23 +0000 (07:31 -0400)]
drm/amd/amdgpu: Make debugfs write compliment read
Add PG lock support as well as bank selection to
the MMIO write function.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Sun, 9 Oct 2016 11:41:26 +0000 (07:41 -0400)]
drm/amd/amdgpu: Allow broadcast on debugfs read (v2)
Allow any of the se/sh/instance fields to be
specified as a broadcast by submitting 0x3FF.
(v2) Fix broadcast range checking
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Thu, 13 Oct 2016 16:15:03 +0000 (12:15 -0400)]
drm/amd/amdgpu: Fix debugfs wave reader
On non VI/CZ platforms it would not free
the grbm index lock.
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 11 Oct 2016 18:48:55 +0000 (14:48 -0400)]
drm/amd/amdgpu: Add wave reader to debugfs
Currently supports CZ/VI. Allows nearly atomic read
of wave data from GPU.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 13 Oct 2016 21:41:13 +0000 (17:41 -0400)]
drm/amdgpu: rework IP block registration (v2)
This makes it easier to replace specific IP blocks on
asics for handling virtual_dce, DAL, etc. and for building
IP lists for hw or tables. This also stored the status
information in the same structure.
v2: split out spelling fix into a separate patch
add a function to add IPs to the list
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 12 Oct 2016 07:38:56 +0000 (15:38 +0800)]
drm/amdgpu: save number of vce states in dpm struct.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 12 Oct 2016 07:13:29 +0000 (15:13 +0800)]
drm/amdgpu: use same vce state definition in dpm and powerplay
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 14:09:32 +0000 (16:09 +0200)]
drm/amdgpu: move align_mask and nop into ring funcs as well (v2)
They are constant as well.
v2: update uvd and vce phys ring structures as well
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 13:36:39 +0000 (15:36 +0200)]
drm/amdgpu: move the ring type into the funcs structure (v2)
It's constant, so it doesn't make to much sense to keep it
with the variable data.
v2: update vce and uvd phys mode ring structures as well
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 12:29:38 +0000 (14:29 +0200)]
drm/amdgpu: move IB and frame size directly into the engine description
I should have suggested that on the initial patchset. This saves us a
few CPU cycles during CS and a bunch of loc.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 12:23:00 +0000 (14:23 +0200)]
drm/amdgpu: remove explicit NULL init for parse_cs
sed -i "/\.parse_cs = NULL,/d" drivers/gpu/drm/amd/amdgpu/*.c
That's just a leftover from radeon.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 10:59:20 +0000 (12:59 +0200)]
drm/amdgpu: remove 128 NOP hack from vm_flush v2
With the padding raised to 256 DW that shouldn't be needed any more.
v2: reduce estimation as well
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 10:51:57 +0000 (12:51 +0200)]
drm/amdgpu: remove ring type check for conditional execution
If a ring doesn't support that it shouldn't implement the function.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Oct 2016 10:38:21 +0000 (12:38 +0200)]
drm/amdgpu: pad gfx and compute rings to 256 dw
The same as on windows to avoid further problems with CE/DE
command submission overlaps.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 28 Sep 2016 14:33:01 +0000 (16:33 +0200)]
drm/amdgpu: use amdgpu_vm_get_pd_bo in the GEM code
Instead of messing with the PD directly.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / karo-tx-linux.git / log