Arnd Bergmann [Fri, 22 Mar 2013 12:41:45 +0000 (13:41 +0100)]
Merge tag 'renesas-boards2-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman <horms+renesas@verge.net.au>:
Second round of Renesas ARM-based SoC board updates for v3.10
* Resolve a build regression on Mackerel by reverting
"ARM: shmobile: streamline mackerel SD and MMC devices"
* DTS cleanup and corrections for kzm9g/sh73a0 from Guennadi
* SDHI voltage regulator enhancements for kzm9g and armadillo800eva
from Guennadi
* tag 'renesas-boards2-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
Revert "ARM: shmobile: streamline mackerel SD and MMC devices"
ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names
ARM: shmobile: kzm9g: add fixed voltage regulators for SDHI0 and SDHI2
ARM: shmobile: armadillo800eva: add a fixed voltage regulator for SDHI1
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi
ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supply
This appears to be incompatible with
"ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs"
Reverting this change resolves the following build failure:
arch/arm/mach-shmobile/board-mackerel.c: In function ‘mackerel_init’:
arch/arm/mach-shmobile/board-mackerel.c:1468: error: ‘GPIO_FN_SDHICMD1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1468: error: (Each undeclared identifier is reported only once
arch/arm/mach-shmobile/board-mackerel.c:1468: error: for each function it appears in.)
arch/arm/mach-shmobile/board-mackerel.c:1469: error: ‘GPIO_FN_SDHICLK1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1470: error: ‘GPIO_FN_SDHID1_3’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1471: error: ‘GPIO_FN_SDHID1_2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1472: error: ‘GPIO_FN_SDHID1_1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1473: error: ‘GPIO_FN_SDHID1_0’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1489: error: ‘GPIO_FN_SDHICMD2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1490: error: ‘GPIO_FN_SDHICLK2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1491: error: ‘GPIO_FN_SDHID2_3’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1492: error: ‘GPIO_FN_SDHID2_2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1493: error: ‘GPIO_FN_SDHID2_1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1494: error: ‘GPIO_FN_SDHID2_0’ undeclared (first use in this function)
ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names
Fix several device-tree bindings, that haven't been updated for newest
versions of respective drivers, and device names and pin numbers, left over
from non-DT and old pinctrl versions.
ARM: shmobile: kzm9g: add fixed voltage regulators for SDHI0 and SDHI2
Both SDHI0 and SDHI2 power supplies on kzm9g can be switched on and off. In
the current version this is not used and the regulators are hard-wired to
"on." This patch switches SDHI0 and SDHI2 to proper fixed-voltage
regulators, using GPIOs to enable and disable them. Both ports shall
now be specifying the MMC_CAP_POWER_OFF_CARD MMC capability. Only SDHI0
has been tested with an SDIO card, since SDHI2 is a microSD slot.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: armadillo800eva: add a fixed voltage regulator for SDHI1
The SDHI1 power supply on armadillo800eva can be switched on and off. In
the current version this is not used and the regulator is hard-wired to
"on." This patch switches SDHI1 to a proper fixed-voltage regulator,
using a GPIO to enable and disable it. Both SDHI0 and SDHI1 ports shall
now be specifying the MMC_CAP_POWER_OFF_CARD MMC capability. Both
interfaces tested with an SDIO card.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi
To avoid having to repeat common DT node properties in all .dts files
move them to SoC's .dtsi file, setting their status to "disabled."
Individual boards will pick up devices, that they want to use and
change their DT node status to enabled.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supply
kzm9g supplies 3.3V to its SDHI0 and SDHI2 interfaces. Specifying 2.8V
prevents some (e.g. certain SDIO) cards from working. This patch fixes the
voltage and removes redundant OCR masks from platform data.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID
ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID
enabled to use gic_iid macro.
This patch exchange current GIC interrupt setting
from gic_spi() to gic_iid()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ horms+renesas@verge.net.au: Split irq.h portion into a separate patch ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Fri, 15 Feb 2013 12:38:20 +0000 (21:38 +0900)]
ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START
Remove .init_late and .restart from DT_MACHINE_START
for kzm9g reference as these are not necessary to
bring the board up which is the main aim of kzm9g reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reference kernel configurations for armadillo800eva and kzm9g boards do not
have to depend on their respective "legacy" configurations, doing device
instantiation in .c, they can be configured and built independently.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
[horms+renesas@verge.net.au: created separate patch for kzm9g portion] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference
Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT
support we cannot use GPIO card-detection and regulator switching.
Also update the MMCIF DT node to use all 8 data lines and avoid
redundant information in DT.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference
GPIOs can be provided by the pinctrl subsystem, which can be initialised
by DT. Therefore DT has to be parsed before requesting GPIOs. Also non-DT
pinmux has to be configured early.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Wed, 21 Nov 2012 15:34:25 +0000 (00:34 +0900)]
ARM: shmobile: kzm9g: Reference DT implementation
Provide alternate board code for the kzm9g to demonstrate
how DT may be used given the current state of driver
device tree support. This is intended to act as a reference
for mach-shmobile developers.
Some notes:
* Brings up the GIC interrupt handler using device tree
* Brings up the following device using device tree:
- MMCIF (MMC)
* Does not bring up the INTC interrupt controller at all,
thus external devices may not be used. In particular,
the SMSC ethernet device may not be used and thus
NFS root may not be used.
* Uses existing C code and not device tree to initialise the following,
which are needed for a working board:
- SCIF (Serial)
- CMT (Clock)
- PFC (GPIO)
To use this alternate board code instead of the normal board code,
CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config.
And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used.
Includes fix by Thierry Reding to no longer use gic_handle_irq()
Includes fixes by Guennadi Liakhovetski for recent pinmux changes.
Provide alternate board code for the marzen to demonstrate
how DT may be used given the current state of driver
device tree support. This is intended to act as a reference
for mach-shmobile developers.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Arnd Bergmann [Thu, 14 Feb 2013 22:26:54 +0000 (23:26 +0100)]
ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused
Patch eac036ef9e "ARM: shmobile: streamline mackerel SD and MMC devices"
made the use of the sh_mmcif_device variable for mackarel optional,
but the definition is always provided, causing a build warning.
arch/arm/mach-shmobile/board-mackerel.c:1120:31: warning: 'sh_mmcif_device'
defined but not used [-Wunused-variable]
Marking the variable as __maybe_unused will do the right thing here.
ARM: shmobile: streamline mackerel SD and MMC devices
This patch fixes the following issues with SD and MMC interfaces on mackerel:
1. replace custom card-detection functions with standard GPIO CD API
2. resources don't have to be numbered
3. add SDHI interrupt names
4. remove OCR masks, where regulators are used
5. only specify SDHI CD interrupts on interfaces where a CD pin is present -
SDHI0
6. don't instantiate an MMCIF device and initialise MMCIF pins if SDHI1 is
selected
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva
When regulators are used with MMC devices, explicitly provided OCR masks
are ignored, they can be removed from platform data. Also switch SDHI0
from fixed regulator with hard-wired GPIO levels to a proper GPIO regulator
instance to enable dynamic voltage switching.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: use GPIO SD-card detection on armadillo800eva
Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO
card detection, which provides maximum power saving and automatically
selects IRQ or polling mode, depending on the CD GPIO capability.
Phil Edworthy [Thu, 31 Jan 2013 01:45:01 +0000 (02:45 +0100)]
r8a7779: Add Display Unit clock support
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
[Rename device from to rcarfb to rcar-du] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Manual conflict resolution] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Board code used the non-pulled-up version of the function GPIOs, but
those are defined in the PFC driver as enabling the pull-ups anyway.
Enable pull-ups on the MMCIF data and command pins through the pinconf
API.