Deepak S [Mon, 27 Jan 2014 16:05:05 +0000 (21:35 +0530)]
drm/i915: Disable/Enable PM Intrrupts based on the current freq.
When current delay is already at max delay, Let's disable the PM UP
THRESHOLD INTRRUPTS, so that we will not get further interrupts until
current delay is less than max delay, Also request for the PM DOWN
THRESHOLD INTRRUPTS to indicate the decrease in clock freq. and
viceversa for PM DOWN THRESHOLD INTRRUPTS.
v2: Use bool variables (Daniel)
v3: Fix Interrupt masking bit (Deepak)
v4: Use existing symbolic constants in i915_reg.h (Daniel)
v5: Add pm interrupt mask after new_delay calculation (Ville)
Signed-off-by: Deepak S <deepak.s@intel.com>
[danvet: Pass new_delay by value as suggested by Ville. Also appease
checkpatch.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 22 Jan 2014 19:33:04 +0000 (21:33 +0200)]
Revert "drm/i915: set conservative clock gating values on VLV v2"
We're disabling a boatload of clock gating features on VLV. Maybe these
days we don't need to do that. At least I'm not aware of any workarounds
with this level of paranoia.
Ville Syrjälä [Wed, 22 Jan 2014 19:33:03 +0000 (21:33 +0200)]
drm/i915: Clarify WaDisable4x2SubspanOptimization situation for VLV
WaDisable4x2SubspanOptimization isn't listed for VLV in the workaround
database, but BSpec says that the relevant bit must be set. Add a
comment to remind people of this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 22 Jan 2014 19:33:00 +0000 (21:33 +0200)]
drm/i915: Don't apply WaVSThreadDispatchOverride on HSW
BSpec states that the thread override values set by
gen7_setup_fixed_func_scheduler() are invalid for HSW. So let's not
muck around with them.
Since gen7_setup_fixed_func_scheduler() now has two totally independent
parts, one for IVB and one for HSW, move the HSW part directly into
haswell_init_clock_gating().
Note tht there's another workaround by the name of
WaHSWVSRefCountFullforceMissDisable which basically claims that later
steppings don't need the fix, but since WaVSRefCountFullforceMissDisable
is listed to be needed for all steppings play it safe and keep applying
the workaround.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current comments indicate that this function implements
WaVSRefCountFullforceMissDisable, which is only true for HSW.
The original purpose of the function is to implement
WaVSThreadDispatchOverride (and a bit more). Fix up the comments
to match reality.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 22 Jan 2014 12:36:08 +0000 (14:36 +0200)]
drm/i915: Add debugfs hooks for messign with watermark latencies
Add a few new debugfs files which allow changing the watermark memory
latency values during runtime. This can be used to determine the if the
original BIOS provided latency values are no good.
v2: Drop superfluous plane name from output
Take modeset locks around the latency value read/write
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 22 Jan 2014 19:32:53 +0000 (21:32 +0200)]
drm/i915: Drop bogus comment about RCPB unit clock gating on IVB
Someone copy pasted the comment from the SNB code w/o reading it.
We never actually implemented the workaround to disable RCPB unit
clock gating on IVB. It would have been needed for early steppings,
but we don't care about those anymore, so just remove the stale
comment.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 28 Jan 2014 07:07:00 +0000 (23:07 -0800)]
drm/i915: Create a USES_PPGTT macro
There are cases where we want to know if there is a full, or aliased
PPGTT. Currently, in fact the only distinction we ever need to make is
when we're using full PPGTT.
This patch is simply to promote readability and clarify for the
confusing existing usage where "aliasing" meant aliasing and full.
v2: Remove USES_ALIASING_PPGTT since there are currently no cases where
we need to check if we're using aliasing, but not full PPGTT. (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Mon, 27 Jan 2014 13:26:38 +0000 (15:26 +0200)]
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters
Having to use i915.i915_foo is inconsistent and a bit on the verbose
side. Drop the prefix per Daniel's request, who also says this is not
ABI we need to maintain.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 22 Jan 2014 22:39:30 +0000 (23:39 +0100)]
drm/i915: GEN7_MSG_CONTROL is ivb-only
At least I couldn't find it in the Haswell Bspec any more and we've
tried to test-boot a Haswell machine with num_pipes forced to 0 (i.e.
hit the PCH_NOP path) and the unclaimed register logic complained.
So restrict this dance to just ivb platforms.
v2: Art pointed out that the bits simply moved on hsw+
v3: Buy code terseneness with a notch of sublety as suggested by
Chris.
v4: Frob the right bit, spotted by Art.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arthur Ranyan <arthur.j.runyan@intel.com> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Art Runyan <arthur.j.runyan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Mon, 6 Jan 2014 19:17:23 +0000 (19:17 +0000)]
drm/i915: Constify the drm_i915_private pointer a bit more
A lot of the WM functions are only reading from that structure and are
already using const. While converting the code to use dev_priv instead
of dev, I noticed a few places where we can give that hint.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 21 Jan 2014 09:24:25 +0000 (11:24 +0200)]
drm/i915: move module parameters into a struct, in a new file
With 20+ module parameters, I think referring to them via a struct
improves clarity over just having a bunch of globals. While at it, move
the parameter initialization and definitions into a new file
i915_params.c to reduce clutter in i915_drv.c.
Apart from the ill-named i915_enable_rc6, i915_enable_fbc and
i915_enable_ppgtt parameters, for which we lose the "i915_" prefix
internally, the module parameters now look the same both on the kernel
command line and in code. For example, "i915.modeset".
The downsides of the change are losing static on a couple of variables
and not having the initialization and module_param_named() right next to
each other. On the other hand, all module parameters are now defined in
one place at i915_params.c. Plus you can do this to find all module
parameter references:
$ git grep "i915\." -- drivers/gpu/drm/i915
v2:
- move the definitions into a new file
- s/i915_params/i915/
- make i915_try_reset i915.reset, for consistency
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 22 Jan 2014 19:32:43 +0000 (21:32 +0200)]
drm/i915: We implement WaMiSetContext_Hang
WaMiSetContext_Hang tells us that a MI_NOOP must follow MI_SET_CONTEXT.
The other thing WaMiSetContext_Hang seems to say is that URB_FENCE isn't
allowed to straddle two cachelines. But we don't issue those from the
kernel so we don't care.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 23 Jan 2014 22:40:36 +0000 (22:40 +0000)]
drm/i915: Include HW status page in error capture
Many times in the past we have concluded that the cause of the GPU hang
has been that the hw status page was stale, usually because the GPU and
CPU disagreed over the address of the page. Having stumbled across yet
another issue that seems to be related to the HWSP, it is time to
include that information in the GPU error dump.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 23 Jan 2014 19:40:02 +0000 (19:40 +0000)]
drm/i915: Always pin the default context
Through a twisty and circuituous path it is possible to currently trick
the code into creating a default context and forgetting to pin it
immediately into the GGTT. (This requires a system using contexts without
an aliasing ppgtt, which is currently restricted to Baytrails machines
manually specifying a module parameter to force enable contexts, or
on Sandybridge and later that manually disable the aliasing ppgtt.) The
consequence is that during module unload we attempt to unpin the default
context twice and encounter a BUG remonstrating that we attempt to unpin
an unbound object.
v2: Rename the local variable (is_default_ctx) to avoid confusion with
the function is_default_ctx(). And correct Jesse's email address.
Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73985 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
[danvet: Fix up the rebase fail from my first attempt, thankfully
pointed out by Ville.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Fri, 24 Jan 2014 15:36:17 +0000 (13:36 -0200)]
drm/i915: debugfs: Add support for probing DP sink CRC.
This debugfs interface will allow intel-gpu-tools test case
to verify if screen has been updated properly on cases like PSR.
v2: Accepted all Daniel's suggestions:
* grab modeset lock
* loop over connector and check DPMS on
* return errors
* use _eDP1 suffix for easy future extension
* don't cache crc_supported neither latest crc
* return crc as a full array and read it at once with aux.
* use 0 to turn TEST_SINK off.
* split the drm_helpers definitions in another patch.
v3: Accepted 2 Damien's suggestion: remove h from printf hexa
and return ENODEV when eDP not present instead of EAGAIN.
v4: Accepted 2 Jani' s suggestion: 1 path for unlock and remove
_retry from aux read.
v5: removing last missing useless _retry (by Damien)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:17 +0000 (16:49 +0200)]
drm/i915: Fix FBC_FENCE_OFF
Having a 4 byte register at 0x321b seems unlikely as that's not
4 byte aligned. Since later platforms have more or less the same FBC
registers with new names, assume that FBC_FENCE_OFF is at 0x3218 just
like DPFC_FENCE_YOFF.
This feels like a simple typo in BSpec. 321Bh looks a lot like 3218h
after all.
Should still be tested on real hardware of course. But I don't have
any mobile gen4 systems.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:16 +0000 (16:49 +0200)]
drm/i915: Fix FBC1 enable message
The debug message telling FBC1 has been enabled is missing a newline.
Add it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On CTG and IVB+ we don't try to preserve any bits from the
DPFC_CONTROL register. Follow suit on ILK/SNB.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:15 +0000 (16:49 +0200)]
drm/i915: Kill most of the FBC register save/restore
We will anyway re-enable FBC normally after resume, so trying to save
and restore the register makes little sense.
We do need to preserve the FBC1 interval bits in FBC_CONTROL since
we only initialize them during driver load, and try to preserve them
after that.
v2: s/I915_HAS_FBC/HAS_FBC/ and fix the check for gen4
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:13 +0000 (16:49 +0200)]
drm/i915: Actually write the correct bits to DPFC_CONTROL on CTG
We set up all the bits for DPFC_CONTROL but forgot to actually
write them to the register. Oops.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:12 +0000 (16:49 +0200)]
drm/i915: Use 1/2 compression ratio limit for 16bpp on FBC2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:11 +0000 (16:49 +0200)]
drm/i915: Improve FBC plane defines a bit
Make the FBC plane macros take the plane as a parameter.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:10 +0000 (16:49 +0200)]
drm/i915: Don't set DPFC_HT_MODIFY bit on CTG/ILK/SNB
The ILK/SNB docs don't really mention the the DPFC_HT_MODIFY bit.
CTG docs clearly state that it should be set only when tracking
back buffer modification in persistent mode. The bit is supposed
to be set by software after the first CPU modification to the
back buffer, and it would get automagically cleared by the hardware
on the next page flip.
Since we only track front buffer modification we don't need to set
this bit. GTT modification tracking still appears to work on ILK
and SNB with the bit unset. I don't have a CTG to verify how that
behaves.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:09 +0000 (16:49 +0200)]
drm/i915: Don't set persistent FBC mode on ILK/SNB
The ILK/SNB docs are a bit unclear what the persistent mode does, but
the CTG docs clearly state that it was meant to be used when we're
tracking back buffer modifications. We never do that, so leave it in
non-persistent mode.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 23 Jan 2014 14:49:08 +0000 (16:49 +0200)]
drm/i915: Don't write IVB_FBC_RT_BASE
We use nuking instead of render tracking on IVB+, so there's
no point in writing IVB_FBC_RT_BASE.
v2: Drop the IVB_FBC_RT_BASE write too
v3: Move the SNB stuff elsewhere, leaving only IVB+ here
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 17 Jan 2014 09:44:32 +0000 (11:44 +0200)]
drm/i915: Make underruns DRM_ERROR
I want to see these without having full debugs enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: fix the gen8 irq handler as spotted by Paulo in his review.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 17 Jan 2014 09:44:31 +0000 (11:44 +0200)]
drm/i915: Limit FIFO underrun reports on GMCH platforms
Currently we print all pipe underruns on GMCH platforms. Hook up the
same logic we use on PCH platforms where we disable the underrun
reporting after the first underrun.
Underruns don't actually generate interrupts themselves on GMCH
platforms, we just can detect them whenever we service other
interrupts. So we don't have any enable bits to worry about. We just
need to remember to clear the underrun status when enabling underrun
reporting.
Note that the underrun handling needs to be moved to the non-locked
pipe_stats[] loop in the interrupt handlers to avoid having to rework
the locking in intel_set_cpu_fifo_underrun_reporting().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 9 Jan 2014 22:57:22 +0000 (22:57 +0000)]
drm/i915: Place the Global GTT VM first in the list of VM
This is useful for debugging as we then know that the first entry is
always the global GTT, and all later entries the per-process GTT VM.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Wed, 22 Jan 2014 20:58:04 +0000 (12:58 -0800)]
drm/i915: fix WRPLL clock calculation
Forgot to convert to using the refclk variable when I added refclk
readout support, and Paulo noticed the resulting calculation was off due
to the way p & r are stored.
Reported-by: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jesse Barnes [Tue, 21 Jan 2014 20:42:10 +0000 (12:42 -0800)]
drm/i915: clock readout support for DDI v3
Read out and calculate the port and pixel clocks on DDI configs as well.
This means we have to grab the DP divider values and look at the port
mapping to figure out which clock select reg to read out.
v2: do the work from ddi_get_config (Ville)
v3: check WRPLL reference clock (Ville)
add additional SPLL freqs (Ville)
clean up port/crtc clock calc (Ville)
fix up crtc_clock conditionals (Ville)
drop superfluous dp_get_m_n from get_config (Ville)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: assume all GM45 Acer laptops use inverted backlight PWM
failed and was later reverted in
commit be505f643925e257087247b996cd8ece787c12af
Author: Alexander van Heukelum <heukelum@fastmail.fm>
Date: Sat Dec 28 21:00:39 2013 +0100
Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"
fix the individual broken machine instead.
Note to backporters:
http://patchwork.freedesktop.org/patch/17837/
is the patch you want for 3.13 and older.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54171
Reference: http://mid.gmane.org/DUB115-W7628C7C710EA51AA110CD4A5000@phx.gbl CC: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Patch mangling for 3.14 plus adding the link to the original
for 3.13.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Todd Previte [Mon, 20 Jan 2014 17:19:39 +0000 (10:19 -0700)]
drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable devices
For HSW+ platforms, enable the 5.4Ghz (HBR2) link rate for devices that support it. The
sink device must report that is supports Displayport 1.2 and the HBR2 bit rate in the
DPCD in order to use HBR2.
Signed-off-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 17 Jan 2014 18:09:03 +0000 (20:09 +0200)]
drm/i915: Shuffle sprite register writes into a tighter group
Group the sprite register writes a bit tighter. We want to write
the registers atomically, and so doing the base address/offset
artihmetic within the critical section is pointless when it can
all be done beforehand.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 16 Jan 2014 21:28:44 +0000 (22:28 +0100)]
drm/i915: Shuffle modeset reset handling around
Currently we're doing the reset handling a bit late, and we're doing
it both in the driver load code and on resume. This makes it unusable
for e.g. resetting the panel power sequence state like Paulo wants to.
Instead of adding yet another single-use callback shuffle things
around:
- Output handling code is responsible to reset/init all state on its
own at driver load time.
- We call the reset functions much earlier, before we start using any
of the modeset code.
Compared to Paulo's new ->resume callback the only difference in
placement is that ->reset is still called without dev->struct_mutex
held. Which is imo a feature.
v2: Rebase on top of the now merge dinq.
Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 17 Jan 2014 13:59:39 +0000 (15:59 +0200)]
drm/i915: Fix new_config and new_enabled for load detect
I forgot to set new_config and new_enabled appropriately in the load
detect code. Fix it up.
v2: Handle the other error path in intel_get_load_detect_pipe() too (Imre)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 17 Jan 2014 09:35:16 +0000 (11:35 +0200)]
drm/i915: Kill dev_priv->irq_received
Not sure anyone cares about this information. I suppose most people
would just look at /proc/interrupts instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 17 Jan 2014 09:35:15 +0000 (11:35 +0200)]
drm/i915: Make irq_received bool
irq_received is used as a boolean in i965_irq_handler(), so make it
bool. This also makes i965_irq_handler() closer to i915_irq_handler().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewd-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 17 Jan 2014 11:43:51 +0000 (13:43 +0200)]
drm/i915: Add intel_hpd_irq_uninstall()
Add intel_hpd_irq_uninstall() which will cancel the hotplug re-enable
timer.
Also s/i915_reenable_hotplug_timer_func/intel_hpd_irq_reenable/
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 19 Dec 2013 16:29:43 +0000 (14:29 -0200)]
drm/i915: don't wait for power cycle when waiting for power off
Function ironlake_wait_panel_off should just wait for the power off
delay, while function ironlake_wait_panel_power_cycle should wait for
the panel cycle (that's required after we turn the panel off, before
we enable it again).
The problem is that, currently, ironlake_wait_panel_off is waiting not
just for the panel to be off, but also for the power cycle delay and
the backlight off delay. This function relies on the PP_STATUS bits
3:0, which are not documented and not supposed to be used. A quick
analysis of the values we get while waiting quickly shows that power
off is reached while bits 3:0 are still 0x1, and the time it takes to
become 0x0 is the power cycle delay.
On my system with backlight off delay of 200ms, power down delay of
50ms and power cycle delay of 500ms, this is what I get:
- Start waiting with value 0x80000008, timestamp 6.429364.
- Jumps to 0xa0000003, timestamp 6.431360 (time waited: 0.001996)
- Jumps to 0xa0000002, timestamp 6.631277 (time waited: 0.201913)
- Jumps to 0x08000001, timestamp 6.681258 (time waited: 0.251894)
- Jumps to 0x00000000, timestamp 7.192012 (time waited: 0.762648)
As you can see, ironlake_wait_panel_off is sleeping 760ms instead of
the expected 50ms: the first 200ms matches the backlight off delay
(which we should already have waited for!), then the 50ms for the real
panel off delay, then the 500ms for the panel power cycle.
This patch makes is look just at bits 31 and 29:28, which will ignore
the panel power cycle.
And just to be clear: this saves 500ms on my system every time we
disable the panel. But we can still save 200ms more (the backlight off
delay) on the next patches.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuougseek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 19 Dec 2013 16:29:42 +0000 (14:29 -0200)]
drm/i915: remove a column of zeros from the eDP wait definitions
I like how the macros are nicely column-aligned, so we can properly
compare what each macro waits for, but a column full of zeroes doesn't
really help anything: it just makes the lines bigger, and they're
already way past 80 columns. I imagine this column was used in the
past, but IMHO now we can get rid of it.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 17 Jan 2014 13:39:48 +0000 (14:39 +0100)]
drm/i915: drop ironlake_ prefix from edp panel/backlight functions
They now also work on vlv, which has the regs somewhere else. And
daring a glance into the looking glass it seems like this
functionality will continue to work the same for the next few hardware
platforms.
So it's better to just remove that misleading prefix and have a bit
shorter code for better readability.
The only exceptions are the panel/backlight functions shared with
intel_ddi.c, those get an intel_ prefix.
While at it make the vdd_on/off functions static.
And one straggler was missing the edp_ in the name, so make everything
neatly OCD.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 19 Dec 2013 16:29:40 +0000 (14:29 -0200)]
drm/i915: save some time when waiting the eDP timings
The eDP spec defines some points where after you do action A, you have
to wait some time before action B. The thing is that in our driver
action B does not happen exactly after action A, but we still use
msleep() calls directly. What this patch does is that we record the
timestamp of when action A happened, then, just before action B, we
look at how much time has passed and only sleep the remaining amount
needed.
With this change, I am able to save about 5-20ms (out of the total
200ms) of the backlight_off delay and completely skip the 1ms
backlight_on delay. The 600ms vdd_off delay doesn't happen during
normal usage anymore due to a previous patch.
v2: - Rename ironlake_wait_jiffies_delay to intel_wait_until_after and
move it to intel_display.c
- Fix the msleep call: diff is in jiffies
v3: - Use "tmp_jiffies" so we don't need to worry about the value of
"jiffies" advancing while we're doing the math.
v4: - Rename function again.
- Move function to i915_drv.h.
- Store last_power_cycle at edp_panel_off too.
- Use msecs_to_jiffies_timeout, then replace the msleep with an
open-coded version that avoids the extra +1 jiffy.
- Try to add units to every variable name so we don't confuse
jiffies with milliseconds.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 19 Dec 2013 16:29:39 +0000 (14:29 -0200)]
drm/i915: init the DP panel power seq variables earlier
Our driver has two different ways of waiting for panel power
sequencing delays. One of these ways is through
ironlake_wait_panel_status, which implicitly uses the values written
to our registers. The other way is through the functions that call
intel_wait_until_after, and on this case we do direct msleep() calls
on the intel_dp->xxx_delay variables.
Function intel_dp_init_panel_power_sequencer is responsible for
initializing the _delay variables and deciding which values we need to
write to the registers, but it does not write these values to the
registers. Only at intel_dp_init_panel_power_sequencer_registers we
actually do this write.
Then problem is that when we call intel_dp_i2c_init, we will get some
I2C calls, which will trigger a VDD enable, which will make use of the
panel power sequencing registers and the _delay variables, so we need
to have both ready by this time. Today, when this happens, the _delay
variables are zero (because they were not computed) and the panel
power sequence registers contain whatever values were written by the
BIOS (which are usually correct).
What this patch does is to make sure that function
intel_dp_init_panel_power_sequencer is called earlier, so by the time
we call intel_dp_i2c_init, the _delay variables will already be
initialized. The actual registers won't contain their final values,
but at least they will contain the values set by the BIOS.
The good side is that we were reading the values, but were not using
them for anything (because we were just skipping the msleep(0) calls),
so this "fix" shouldn't fix any real existing bugs. I was only able to
identify the problem because I added some debug code to check how much
time time we were saving with my previous patch.
Regression introduced by:
commit ed92f0b239ac971edc509169ae3d6955fbe0a188
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Wed Jun 12 17:27:24 2013 -0300
drm/i915: extract intel_edp_init_connector
v2: - Rewrite commit message.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Thu, 16 Jan 2014 17:56:54 +0000 (19:56 +0200)]
drm/i915: clean up HPD IRQ debug printing
Atm, we don't print these events for all platforms and for VLV/G4X we
also print them for DP AUX completion events which is unnecessary spam.
Fix both issues.
Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 14 Jan 2014 12:31:38 +0000 (14:31 +0200)]
drm/i915: Set crtc->new_config to NULL for pipes that are about to be disabled
crtc->new_config is only relevant for pipes that are going to be active
post-modeset. Set the pointer to NULL for all pipes that are going to
be disabled. This is done to help catch bugs where some piece of code
would go looking at crtc->new_config even if the data there is stale.
v2: Clear new_config in disable_crtc_nofb() too (Imre)
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 10 Jan 2014 09:28:09 +0000 (11:28 +0200)]
drm/i915: Don't oops if the initial modeset fails
If the first modeset operation fails, we will attempt to restore the
previous configuration that we read out from the hardware. But as we
don't yet reconstruct the framebuffer information, we end up calling
the modeset code with an enabled crtc but with fb==NULL. This will
lead to an oops within the modeset code.
Check for NULL fb when restoring the configuration, and instead of
oopsing simply disable the pipe.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 10 Jan 2014 09:28:08 +0000 (11:28 +0200)]
drm/i915: Use new_config and new_enabled to simplify the VLV cdclk code
On VLV we need to compute the new cdclk before we've updated the current
state. The code achieved that in a somewhat complex way. Now that we
have new_enabled and new_config, we can simplify the code quite a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 10 Jan 2014 09:28:07 +0000 (11:28 +0200)]
drm/i915: Prepare to track new pipe config per pipe
Add a new_config pointer to intel_crtc which will point to the new pipe
config for said crtc while intel_crtc.config will still contain the old
config during first parts of the modeset operation. This is a step
towards having the entire new state available during the compute phase,
so that we can make accurate decisions about global resource usage.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 10 Jan 2014 09:28:06 +0000 (11:28 +0200)]
drm/i915: Pre-compute pipe enabled state
Add 'new_enabled' to intel_crtc and precompute it alongside new_encoder
and new_crtc. This will allow making decisions about shared resources
that are affected by the set of active pipes, before we've clobbered
anything for real.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've left the masking in the pageflip code since that seems to be some
useful piece of preemptive robustness.
Iirc I've merged this patch under the assumption that the BIOS leaves
some random gunk in the lower bits and gets unhappy if we trample on
them. We have quite a few case like this, so this made sense.
Now I've just learned that there's actual hardware features bits in
the low 12 bits, and the kernel needs to preserve them to allow a
userspace blob to do its job. Given Dave Airlie's clear stance on
userspace blob drivers I've quickly chatted with him and he doesn't
seem too happy. So let's revert this.
If there are indeed bits that we must preserve in this range then we
can ressurrect this patch, but with proper documentation for those
bits supplied. And we probably also need to think a bit about
interactions with our driver.
Cc: Armin Reese <armin.c.reese@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Todd Previte [Thu, 23 Jan 2014 07:13:41 +0000 (00:13 -0700)]
drm/i915: VLV2 - Fix hotplug detect bits
Add new definitions for hotplug live status bits for VLV2 since they're
in reverse order from the gen4x ones.
Changelog:
- Restored gen4 bit definitions
- Added new definitions for VLV2
- Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct
bit defintions
- Replaced a lost trailing brace for the added switch()
Signed-off-by: Todd Previte <tprevite@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951
[danvet: Switch to _VLV postfix instead of prefix and regroupg
comments again so that the g4x warning is right next to those defines.
Also add a _G4X suffix for those special ones. Also cc stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 20 Jan 2014 10:17:37 +0000 (10:17 +0000)]
drm/i915: Repeat evictions whilst pageflip completions are outstanding
Since an old pageflip will keep its scanout buffer object pinned until
it has executed its unpin task on the common workqueue, we can clog up
our GGTT with stale pinned objects. As we cannot flush those workqueues
without dropping our locks, we have to resort to falling back to
userspace and telling them to repeat the operation in order to have a
chance to run our workqueues and free up the required memory. If we
fail, then we are forced to report ENOSPC back to userspace causing the
operation to fail and best-case scenario is that it introduces temporary
corruption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 20 Jan 2014 10:17:36 +0000 (10:17 +0000)]
drm/i915: Wait for completion of pending flips when starved of fences
On older generations (gen2, gen3) the GPU requires fences for many
operations, such as blits. The display hardware also requires fences for
scanouts and this leads to a situation where an arbitrary number of
fences may be pinned by old scanouts following a pageflip but before we
have executed the unpin workqueue. This is unpredictable by userspace
and leads to random EDEADLK when submitting an otherwise benign
execbuffer. However, we can detect when we have an outstanding flip and
so cause userspace to wait upon their completion before finally
declaring that the system is starved of fences. This is really no worse
than forcing the GPU to stall waiting for older execbuffer to retire and
release their fences before we can reallocate them for the next
execbuffer.
v2: move the test for a pending fb unpin to a common routine for
later reuse during eviction
Reported-and-tested-by: dimon@gmx.net
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73696 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Fri, 17 Jan 2014 13:46:43 +0000 (15:46 +0200)]
drm/i915: don't disable DP port after a failed link training
Atm after a failed link training we disable the DP port. This can happen
during a modeset-enable or a DP link re-establishment. The latter can be
a problem and we shouldn't disable the DP port, see the previous patch for
the reasoning. In the former case the right thing would be to disable
the DP port, but also the rest of the pipe.
As a stop-gap solution leave the DP port enabled in both cases. It is an
improvement on its own (avoiding HW lock ups) and the proper solution
for the first case requires a bigger change, so let's keep that on the
TODO list.
v2:
- fix explanation of change impact (Chris)
Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Thu, 16 Jan 2014 16:35:57 +0000 (18:35 +0200)]
drm/i915: don't disable the DP port if the link is lost
Currently if the DP link is lost (either because of a hot unplug, or
failed link status check) we disable the DP port, but leave the rest
of the pipe running. This is incompatible with the modeset disabling
sequence of some platforms/configurations. At least this is the case for
DP ports on the CPU as opposed to PCH.
Atm we'll also get a warning when we do a modeset disable after the
above link lost event, since we expect the DP port to be enabled at this
point (see the bugzilla ticket for the related dmesg).
Note that with this patch we'll still end up disabling the port, thanks
to the HPD uevent and subsequent modeset disable.
See also the next patch fixing the other half of this issue.
Solution suggested by Ville.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70570 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 16 Jan 2014 16:27:15 +0000 (18:27 +0200)]
drm/i915: Eliminate lots of WARNs when there's no backlight present
My 855gm doesn't register the intel backlight but it still ends up
calling the backlight code to enable/disable the backlight via the
LVDS code. This leads to some WARNs due to backlight.max being 0.
Let's have intel_panel_enable_backlight() and intel_panel_disable_backlight()
check whether there's a backlight present or not.
Also move the backlight.present check from asle_set_backlight() into
intel_panel_set_backlight() for some extra symmetry.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72210
Signed off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 1 Jan 2014 18:15:13 +0000 (10:15 -0800)]
drm/i915/ppgtt: Defer request freeing on reset
We need to defer the free request until the object/vma is capable of
being freed - or else we have a problem when we try to destroy the
context.
The exact same issue is described and fixed here:
commit e20780439b26ba95aeb29d3e27cd8cc32bc82a4c
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Fri Dec 6 14:11:22 2013 -0800
drm/i915: Defer request freeing
I had this fix previously, but decided not to keep it for some reason I
can no longer remember.
gem_reset_stats is a really good test at hitting the problem.
Note: This is a bug that only hits the ppgtt topic branch but I've
figured that doing the request cleanup in this order is generally the
right thing to do.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add a code comment to clarify what's actually going on since
the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also
add a note about why we need this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 14 Jan 2014 10:40:54 +0000 (11:40 +0100)]
drm/i915: Tune down reset_stat output from ERROR to debug
This is user-triggerable and hence we should not allow it to spam
dmesg. Also, it upsets the nice dmesg tracking piglit does.
Note that this is just extra debugging information, mostly
unwanted, in case of a hang and that there is a separate message to the
user giving instructions on how to report a bug for a GPU hang.
v2: Add note as suggests in Chris' reply.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72740 Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 17 Dec 2013 23:06:42 +0000 (15:06 -0800)]
drm/i915: Make semaphore modparam RO
A couple patches in the upcoming rework of semaphores will break if
semaphores are toggled by the user at various times. Since the code
cleanups there seem to be an overall win, and toggling semaphores at
runtime is not a terribly useful thing to do, simply make the module
parameter read-only.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 26 Dec 2013 21:39:50 +0000 (13:39 -0800)]
drm/i915: Clarify relocation errnos
While trying to find a random -EINVAL from a failing test, I noticed we
had a few hard to follow return values.
The first two hunks in this patch replace completely useless
initialization of ret. The last several hunks help to distinguish
between altering 'return ret' and 'return <ERROR>'
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Tue, 21 Jan 2014 23:13:13 +0000 (09:13 +1000)]
Merge branch 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux into drm-next
Here's the vblank timestamp pull request you wanted.
I addressed the few bugs that Mario pointed out and added
the r-bs.
As it has been a while since I made the changes, I gave it a
quick spin on a few different i915 machines. Fortunately
everything still seems to be fine.
* 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux:
drm/i915: Add a kludge for DSL incrementing too late and ISR not working
drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos()
drm: Pass 'flags' from the caller to .get_scanout_position()
drm: Fix vblank timestamping constants for interlaced modes
drm/i915: Fix scanoutpos calculations for interlaced modes
drm: Change {pixel,line,frame}dur_ns from s64 to int
drm: Use crtc_clock in drm_calc_timestamping_constants()
drm/radeon: Populate crtc_clock in radeon_atom_get_tv_timings()
drm: Simplify the math in drm_calc_timestamping_constants()
drm: Improve drm_calc_timestamping_constants() documentation
drm/i915: Call drm_calc_timestamping_constants() earlier
drm/i915: Kill hwmode save/restore
drm: Pass the display mode to drm_calc_vbltimestamp_from_scanoutpos()
drm: Pass the display mode to drm_calc_timestamping_constants()
Dave Airlie [Tue, 21 Jan 2014 23:11:39 +0000 (09:11 +1000)]
Merge branch 'topic/core-stuff' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Some straggling drm core patches
* 'topic/core-stuff' of git://people.freedesktop.org/~danvet/drm-intel:
drm/gem: Always initialize the gem object in object_init
drm/edid: Populate picture aspect ratio for CEA modes
drm/edid: parse the list of additional 3D modes
drm/edid: split VIC display mode lookup into a separate function
drm: Make the connector mode_valid() vfunc return a drm_mode_status enum
projects / linux-beck.git / log