Mike Isely [Sat, 7 Mar 2009 04:57:25 +0000 (01:57 -0300)]
V4L/DVB (11194): pvrusb2: Implement mechanism to force a full sub-device update
When a pvrusb2 driver instance first initializes, we need to be sure
to send out a complete state update for everything to all attached
modules. The old i2c layer did this by keeping a separate mask of
"stale" bits for each attached module - and setting that mask to all
stale when that module attaches. But the new sub-device adaptation
I've implemented here no longer has per-module stale bits. So instead
there's now a global "force dirty" bit that is set upon instance
initialization, before the sub-devices are attached. After the first
update, this bit is cleared, allowing for normal update-on-dirty
behavior. In this manner, we ensure that all sub-devices have been
properly synchronized at initialization.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 04:45:10 +0000 (01:45 -0300)]
V4L/DVB (11188): pvrusb2: Sub-device update must happen BEFORE state dirty bits are cleared
The sub-device update mechanism relies on various "dirty" bits in the
driver in order to know what pieces of state need to be propagated out
to the various sub-devices. But that won't work if the dirty bits are
cleared before the update gets a chance to run. This change ensures
that the update takes place before the dirty bits are cleared.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 04:42:40 +0000 (01:42 -0300)]
V4L/DVB (11187): pvrusb2: Allow sub-devices to insert correctly
A sub-device won't successfully attach to our I2C adapter if its class
isn't set to zero. Right the class is still set to
I2C_CLASS_TV_ANALOG in order to allow the old mechanism to still
work. This change temporarily sets the class to zero during the
interval when the sub-device attaches. This code will get removed
when the old i2c layer is finally removed from the driver.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 03:48:09 +0000 (00:48 -0300)]
V4L/DVB (11178): pvrusb2: Make audio sample rate update into a sub-device broadcast
The pvrusb2 driver had previously been using i2c module specific calls
to set the sample rate (a long long time ago this was needed). These
days it is safe to use a broadcast so let's just broadcast this when
communicating audio sample rate to sub-devices.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 03:37:10 +0000 (00:37 -0300)]
V4L/DVB (11175): pvrusb2: Implement sub-device specific update framework
Lay down a foundation whereby it becomes possible to send customized
updates to specific sub-devices. (This becomes useful for routing
configuration, which is a very sub-device specific operation.)
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 03:28:28 +0000 (00:28 -0300)]
V4L/DVB (11174): pvrusb2: Implement reporting of connected sub-devices
The pvrusb2 driver has a function that reports internal state. It can
be accessed from either the debug interface or as the result of a v4l
log status request. This change adds information listing sub-devices
to the report.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 03:17:11 +0000 (00:17 -0300)]
V4L/DVB (11169): pvrusb2: Note who our video decoder sub-device is, and set it up
Other code may need to treat the video decoder sub-device in a special
manner, so this change implements code to recognize when such a
sub-device is connected to the driver, does any special processing for
it, and notes who the device is for future reference.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 03:13:25 +0000 (00:13 -0300)]
V4L/DVB (11167): pvrusb2: Tie in various v4l2 operations into the sub-device mechanism
This is another step in the v42l-subdev assimilation. This implements
various call-outs to sub-devices based on state changes within the
pvrusb2 driver.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 02:58:15 +0000 (23:58 -0300)]
V4L/DVB (11162): pvrusb2: Tie up loose ends with v4l2-subdev setup
Tie up loose ends with v4l2-subdev setup. Set attached module's group
ID to match our internal ID, emit a few useful messages when
sub-devices are dealt with, implement better error legs, and fix an
error in the old i2c layer (caused by changes related to the
v4l2-subdev work here).
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 02:51:35 +0000 (23:51 -0300)]
V4L/DVB (11161): pvrusb2: Set i2c autoprobing to be off by default
In order to keep a sub-device from promiscuously attaching to the
pvrusb2 driver, the i2c adapter's class must be cleared. This change
clears that class by default.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 02:47:10 +0000 (23:47 -0300)]
V4L/DVB (11159): pvrusb2: Providing means to stop tracking an old i2c module
This implements a temporary mechanism to "untrack" an i2c module from
the old i2c layer. The v4l2-subdev related code in the driver will
use this to remove a sub-device from the old i2c layer. In the end,
once the old i2c layer is removed, this will also eventually go away.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 02:30:37 +0000 (23:30 -0300)]
V4L/DVB (11156): pvrusb2: Changes to further isolate old i2c layer
This introduces some additional isolation in the pvrusb2 from the old
i2c layer, a step along the way to separate the driver from that layer
and to make it easier to introduce the common v4l2-subdev framework as
the eventual replacement.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 7 Mar 2009 06:06:09 +0000 (03:06 -0300)]
V4L/DVB (11154): pvrusb2: Split i2c module handling from i2c adapter
This is the first step in the effort to move the pvrusb2 driver over
to using the v4l2-subdev framework. This commit involves mainly
splitting apart pvrusb2-i2c-core - part of it is the driver's I2C
adapter driver and the rest is the old i2c module handling logic. The
i2c module handling junk is moved out to pvrusb2-i2c-track and various
header references are correspondingly updated. Yes, this patch has a
huge pile of checkpatch complaints, but I'm NOT going to fix any of
it. Why? First, I'm moving a large chunk of existing code and I'm
not going to spend time adjusting it to match someone's idea of coding
style. Second, in the end I expect all that moved code to go away by
the time the rework is done so wasting time on it now to adhere to the
standard is in the end a large waste of time.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (11142): au0828: fix oops on ARM platform when allocating transfer buffers
Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory
is not permitted for DMA on the ARM platform.
Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM
hardware that was experiencing the oops (tested on the at91rm9200 based
LinuxStamp).
Thanks to David Brownell <david-b@pacbell.net> for providing insight into the
ARM memory architecture.
V4L/DVB (11141): em28xx: fix oops on ARM platform when allocating transfer buffers
Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory
is not permitted for DMA on the ARM platform.
Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM
hardware that was experiencing the oops (tested on the at91rm9200 based
LinuxStamp).
Thanks to David Brownell <david-b@pacbell.net> for providing insight into the
ARM memory architecture.
V4L/DVB (11140): usbvision: fix oops on ARM platform when allocating transfer buffers
Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory
is not permitted for DMA on the ARM platform.
Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware
that was experiencing the oops (tested on the at91rm9200 based LinuxStamp).
Thanks to David Brownell <david-b@pacbell.net> for providing insight into the
ARM memory architecture.
V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISE
There are several Kconfig items using CUSTOMIZE. Yet, most use the English
writing CUSTOMISE. This generates lots of trouble, because people sometimes type
the Kbuild item different.
Let's standardise every occurrence using the same syntax.
The changes were generated by this small shell script:
for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done
Alan McIvor [Fri, 13 Mar 2009 00:43:34 +0000 (21:43 -0300)]
V4L/DVB (11124): Add support for ProVideo PV-183 to bttv
Add support for ProVideo PV-183 to bttv
This patch adds support for the ProVideo PV-183 card to the bttv
device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint
Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels
available. There are no tuners on this card.
Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 18 Mar 2009 16:31:56 +0000 (13:31 -0300)]
V4L/DVB (11120): cafe_ccic: stick in a comment with a request for test results
Due to lack of hardware this conversion to v4l2_device/v4l2_subdev is
untested. If all goes well I should be able to test it in about a month,
but just in case I can't manage that it should be made clear in the code
that this isn't tested.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 18 Mar 2009 16:25:54 +0000 (13:25 -0300)]
V4L/DVB (11118): cafe_ccic: replace debugfs with g/s_register ioctls.
Using VIDIOC_DBG_S/G_REGISTER is the standard way of reading/writing register
for advanced debugging under v4l2. In addition, using this means that the
cafe_ccic driver doesn't need to have knowledge about the used sensor: the
debug ioctl can be passed on to the sensor if it isn't for the host.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As reported by Randy Dunlap <randy.dunlap@oracle.com>:
ERROR: "dvb_dummy_fe_ofdm_attach" [drivers/media/video/cx231xx/cx231xx-dvb.ko] undefined!
This happens since cx231xx DVB part still misses the frontend modules.
So, the dummy frontend were used for development. The proper fix is to
implement the DVB modules there, as they will be required.
While this won't happen, lets allow the compilation with or without the
dummy FE testing module.
au8522 is now dependent of V4L2, as reported by Randy Dunlap
<randy.dunlap@oracle.com>:
au8522_decoder.c:(.text+0x199898): undefined reference to `v4l2_ctrl_query_fill'
au8522_decoder.c:(.text+0x1998b3): undefined reference to `v4l2_ctrl_query_fill'
au8522_decoder.c:(.text+0x199944): undefined reference to `v4l2_device_unregister_subdev'
au8522_decoder.c:(.text+0x19997c): undefined reference to `v4l2_chip_ident_i2c_client'
au8522_decoder.c:(.text+0x199f1e): undefined reference to `v4l2_i2c_subdev_init'
V4L/DVB (11109): au0828: Fix compilation when VIDEO_ADV_DEBUG = n
As reported by Kyle McMartin and Randy Dunlap:
drivers/media/video/au0828/au0828-video.c:1438: error: 'const struct v4l2_subdev_core_ops' has no member named 'g_register'
drivers/media/video/au0828/au0828-video.c:1453: error: 'const struct v4l2_subdev_core_ops' has no member named 's_register'
This patch properly implements those two API ioctls only when debug is
enabled.
Janne Grunau [Wed, 18 Mar 2009 21:10:04 +0000 (18:10 -0300)]
V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device
The device encodes component video up to 1080i to a MPEG-TS stream with
H.264 video and stereo AAC audio. Newer firmwares accept also AC3
(up to 5.1) audio over optical SPDIF without reencoding.
Firmware upgrade is unimplemeted but rather unimportant since
the firmware sits on a flash chip.
The I2C adapter to drive the integrated infrared receiver/sender is
currently disabled due to a conflict with cx18-based devices.
Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 14 Mar 2009 23:03:26 +0000 (20:03 -0300)]
V4L/DVB (11091): cx18, ivtv: Ensure endianess for linemasks in VBI embedded in MPEG stream
The sliced VBI payloads that cx18 and ivtv would insert in the MPEG stream
did not have consistent endianess for the linemasks in the payload (a big
endian platform would write them out big endian). This change ensures the
linemasks are always stored as little-endian in the MPEG stream to ensure
cross platform consistency in parsing the generated MPEG stream.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Per Hans Verkuil <hverkuil@xs4all.nl> instruction, remove the deprecated
attach_inform/detach_inform routines, and convert over the i2c calls to
subdev calls.
Thanks to Hans Verkuil <hverkuil@xs4all.nl> for providing feedback on the
au0828 analog support.
V4L/DVB (11079): au0828: fix panic on disconnect if analog initialization failed
If the analog initialization failed to create the video device, we never
actually add the entry to the au0828_devlist. Therefore a panic occurs when
unregistering the analog subsystem.
Make it so we only remove the entry from the list if we added it to the list
in the first place.
V4L/DVB (11078): au0828: properly handle non-existent analog inputs
It is not valid to look for dev->board.input == NULL to detect an undefined
analog configuration section, since it is a member of the struct and not a
pointer (hence it will *always* be non-NULL). Do the check based on whether
the first input is actually a valid input type instead.
Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware
of various configurations to test with.
V4L/DVB (11077): au0828: properly handle missing analog USB endpoint
Move the setup of the analog isoc handler into au0828-video.c, so it does not
occur if there is not an .input section defined for the board. Also fixes a
case where if there is an input section but the board does not actually have
analog support, the digital support will continue to work as expected.
Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware
of various configurations to test with.
V4L/DVB (11076): au0828: make g_chip_ident call work properly
Make the g_chip_ident call work for the au0828/au8522. Discovered when testing
with the v4l2_compliance tool
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
[mchehab@redhat.com: fix merge conflict, due to a path change for analog demod] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There was a bug where enumerating the i2c for devices would result in false
positives. The root of the issue was the scanning was using SMBUS_QUICK
messages, which are zero length write requests (which our i2c adapter
implementation didn't handle). Because we never strobed any bytes onto the
bus, the status register would still contain the value from the previous
request.
Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.
V4L/DVB (11071): tveeprom: add the xc5000 tuner to the tveeprom definition
Prior to now, we never relied on the Hauppauge tveeprom to identify which
tuner is associated with the board. Now that the HVR-950q determines what
the tuner is based on the eeprom, set the tuner ID appropriately.
Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on
the tveeprom organization.
projects / linux-beck.git / log