Dave Airlie [Thu, 30 Jan 2014 00:24:56 +0000 (10:24 +1000)]
Merge branch 'drm-next-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-next
more radeon fixes
* 'drm-next-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dce8: workaround for atom BlankCrtc table
drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
drm/radeon: set si_notify_smc_display_change properly
drm/radeon: fix DAC interrupt handling on DCE5+
drm/radeon: clean up active vram sizing
drm/radeon: skip async dma init on r6xx
drm/radeon/runpm: don't runtime suspend non-PX cards
drm/radeon: add ring to fence trace functions
drm/radeon: add missing trace point
drm/radeon: fix VMID use tracking
Alex Deucher [Wed, 29 Jan 2014 04:49:37 +0000 (23:49 -0500)]
drm/radeon/dce8: workaround for atom BlankCrtc table
Some DCE8 boards have a funky BlankCrtc table that results
in a timeout when trying to blank the display. The
timeout is harmless (all operations needed from the table
are complete), but wastes time and is confusing to users so
work around it.
Forcing a display active when there is none causes problems with
dpm on some SI boards which results in improperly initialized
dpm state and boot failures on some boards. As for the bug commit 4573388c92ee tried to address, one can manually force the state to
high for better performance when using the card as a headless compute
node until a better fix is developed.
Alex Deucher [Mon, 27 Jan 2014 16:26:33 +0000 (11:26 -0500)]
drm/radeon: clean up active vram sizing
If we are not able to properly initialize one of the gpu
engines for buffer paging, we limit vram to the size of
the cpu visible aperture. We generally either use the gfx
or dma engine to do this. Clean up the size limiting code
to only adjust the size based on what ring is selected
for buffer paging rather than making assumptions about which
engine is selected for paging.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
Alex Deucher [Mon, 27 Jan 2014 15:59:51 +0000 (10:59 -0500)]
drm/radeon: skip async dma init on r6xx
The hw is buggy and it's not currently used, but it's
currently still initialized by the driver. Skip the init.
Skipping init also seems to improve stability with dpm on
some r6xx asics.
Dave Airlie [Wed, 29 Jan 2014 02:03:56 +0000 (12:03 +1000)]
Merge tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.14-rc1 (update)
These patches fix some issues caused by the DRM panel support from the
previous pull request and add two more panels (for the Toshiba AC100 as
well as the Seaboard and Ventana).
* tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Obtain head number from DT
drm/panel: update EDID BLOB in panel_simple_get_modes()
gpu: host1x: Remove unnecessary include
drm/tegra: Use proper data type
drm/tegra: Clarify how panel modes override others
drm/tegra: Fix possible CRTC mask for RGB outputs
drm/i915: Use drm_encoder_crtc_ok()
drm: Move drm_encoder_crtc_ok() to core
drm: provide a helper for the encoder possible_crtcs mask
drm/tegra: Don't check resource with devm_ioremap_resource()
drm/panel: Add support for Chunghwa CLAA101WA01A panel
drm/panel: Add support for Samsung LTN101NT05 panel
Dave Airlie [Thu, 23 Jan 2014 23:50:18 +0000 (09:50 +1000)]
drm: ast,cirrus,mgag200: use drm_can_sleep
these 3 were checking in_interrupt but we have situations where
calling vunmap under this could cause a BUG to be hit in
smp_call_function_many. Use the drm_can_sleep macro instead,
which should stop this path from been taken in this case.
Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 29 Jan 2014 00:21:39 +0000 (10:21 +1000)]
Merge tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Pile of -fixes all over the place. Lot's of cc: stable.
Only big thing is that we've dropped the preliminary hw support tag for
bdw - it seems to work. Which also means that I'll shovel a few more bdw
patches through -fixes, there's 5 w/a patches from Ken already on
intel-gfx.
* tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Fix the offset issue for the stolen GEM objects
drm/i915: Decouple GPU error reporting from ring initialisation
i915: remove pm_qos request on error
Revert "drm/i915: Mask reserved bits in display/sprite address registers"
drm/i915: VLV2 - Fix hotplug detect bits
drm/i915: Allow reading the TIMESTAMP register on Gen8.
drm/i915: Repeat evictions whilst pageflip completions are outstanding
drm/i915: Wait for completion of pending flips when starved of fences
drm/i915: don't disable DP port after a failed link training
drm/i915: don't disable the DP port if the link is lost
drm/i915: Eliminate lots of WARNs when there's no backlight present
drm/i915: g4x/vlv: fix dp aux interrupt mask
drm/i915/ppgtt: Defer request freeing on reset
i915: send D1 opregion notification
drm/i915/bdw: remove preliminary_hw_support flag from BDW
drm/i915: Tune down reset_stat output from ERROR to debug
drm/i915: Make semaphore modparam RO
drm/i915: Fix disabled semaphores
drm/i915: Clarify relocation errnos
drm/i915: Spelling s/auxilliary/auxiliary/
Dave Airlie [Tue, 28 Jan 2014 23:37:47 +0000 (09:37 +1000)]
Merge tag 'omapdrm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm patches for 3.14
* tag 'omapdrm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
drm/omap: Enable DT support for DMM
drm/omap: fix: change dev_unload order
drm/omap: fix: disable encoder before destroying it
drm/omap: fix: disconnect devices when omapdrm module is removed
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
drm/omap: fix (un)registering irqs inside an irq handler
Dave Airlie [Tue, 28 Jan 2014 23:35:48 +0000 (09:35 +1000)]
Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-next
Only two patches this time around. One trivial and one locking fix.
* 'gma500-next' of git://github.com/patjak/drm-gma500:
drm/gma500: Lock struct_mutex around cursor updates
drivers: gpu: Mark function as static in cdv_intel_dp.c
Akash Goel [Mon, 13 Jan 2014 10:54:45 +0000 (16:24 +0530)]
drm/i915: Fix the offset issue for the stolen GEM objects
The 'offset' field of the 'scatterlist' structure was wrongly
programmed with the offset value from the base of stolen area,
whereas this field indicates the offset from where the interested
data starts within the first PAGE pointed to by 'scattterlist'
structure. As a result when a new GEM object allocated from stolen
area is mapped to GTT, it could lead to an overwrite of GTT entries
as the page count calculation will go wrong, refer the function
'sg_page_count'.
Russell King [Mon, 27 Jan 2014 23:33:11 +0000 (23:33 +0000)]
DRM: armada: fix missing DRM_KMS_FB_HELPER select
Commit 92b6f89f6b8f (drm: Add separate Kconfig option for fbdev helpers)
happened in parallel with the inclusion of Armada DRM into mainline,
and so missed this update. Add the necessary select statement to avoid
build errors.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Chris Wilson [Mon, 27 Jan 2014 13:52:34 +0000 (13:52 +0000)]
drm/i915: Decouple GPU error reporting from ring initialisation
Currently we report through our error state only the rings that have
been initialised (as detected by ring->obj). This check is done after
the GPU reset and ring re-initialisation, which means that the software
state may not be the same as when we captured the hardware error and we
may not print out any of the vital information for debugging the hang.
This (and the implied object leak) is a regression from
Note that we are already starting to get bug reports with incomplete
error states from 3.13, which also hampers debugging userspace driver
issues.
v2: Prevent a NULL dereference on 830gm/845g after a GPU reset where
the scratch obj may be NULL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=74094 Cc: stable@vger.kernel.org # please don't delay since it's a
vital support/debug feature for the intel gfx stack in general Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add a bit of fluff to make it clear we need this expedited in
stable.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've left the masking in the pageflip code since that seems to be some
useful piece of preemptive robustness.
Iirc I've merged this patch under the assumption that the BIOS leaves
some random gunk in the lower bits and gets unhappy if we trample on
them. We have quite a few case like this, so this made sense.
Now I've just learned that there's actual hardware features bits in
the low 12 bits, and the kernel needs to preserve them to allow a
userspace blob to do its job. Given Dave Airlie's clear stance on
userspace blob drivers I've quickly chatted with him and he doesn't
seem too happy. So let's revert this.
If there are indeed bits that we must preserve in this range then we
can ressurrect this patch, but with proper documentation for those
bits supplied. And we probably also need to think a bit about
interactions with our driver.
Cc: Armin Reese <armin.c.reese@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Thu, 9 Jan 2014 16:08:36 +0000 (17:08 +0100)]
drm/tegra: Obtain head number from DT
The head number of a given display controller is fixed in hardware and
required to program outputs appropriately. Relying on the driver probe
order to determine this number will not work, since that could yield a
situation where the second head was probed first and would be assigned
head number 0 instead of 1.
By explicitly specifying the head number in the device tree, it is no
longer necessary to rely on these assumptions. As a fallback, if the
property isn't available, derive the head number from the display
controller node's position in the device tree. That's somewhat more
reliable than the previous default but not a proper solution.
Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Todd Previte [Thu, 23 Jan 2014 07:13:41 +0000 (00:13 -0700)]
drm/i915: VLV2 - Fix hotplug detect bits
Add new definitions for hotplug live status bits for VLV2 since they're
in reverse order from the gen4x ones.
Changelog:
- Restored gen4 bit definitions
- Added new definitions for VLV2
- Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct
bit defintions
- Replaced a lost trailing brace for the added switch()
Signed-off-by: Todd Previte <tprevite@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951
[danvet: Switch to _VLV postfix instead of prefix and regroupg
comments again so that the g4x warning is right next to those defines.
Also add a _G4X suffix for those special ones. Also cc stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Thu, 23 Jan 2014 03:50:54 +0000 (13:50 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Summary:
- GK110/GK208 acceleration
- loads more work towards pm, though, still behind a disable wall for now
- error reporting improvements from both Ilia and myself
- more old-school overlay improvements from Ilia
- misc other bits and pieces
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits)
drm/nouveau: call drm_vblank_cleanup() earlier
drm/nouveau: create base display from common code
drm/nv50/gr: print mpc trap name when it's not an mp trap
drm/nv50/gr: update list of mp errors, make it a bitfield
drm/nv50/gr: add more trap names to print on error
drm/nouveau/devinit: lock/unlock crtc regs for all devices, not just pre-nv50
drm/nouveau: hold mutex while syncing to kernel channel
drm/nv50-/devinit: prevent use of engines marked as disabled by hw/vbios
drm/nouveau/device: provide a way for devinit to mark engines as disabled
drm/nouveau/devinit: tidy up the subdev class definition
drm/nouveau/bar: tidy up the subdev and object class definitions
drm/nouveau/instmem: tidy up the object class definition
drm/nouveau/instmem: tidy up the subdev class definition
drm/nouveau/pwr: implement a simple i2c stack
drm/nouveau/pwr: have rd/wr32 routines clobber data instead of addr
drm/nve0/fb: turn off some bits in 10f584 at init
drm/nve0/fb/gddr5: merge a fix from ddr3 for one of the timing settings
drm/nve0/fb/gddr5: yet another random 10f200 bit
drm/nvc0-/fb: hook up skeleton interrupt handler
drm/nve0/fb/gddr5: more 10f200 stuff
...
Ben Skeggs [Tue, 3 Dec 2013 03:09:34 +0000 (13:09 +1000)]
drm/nve0/fb/gddr5: more 10f200 stuff
Seen on Titan. NFI what the condition to switch this on is yet, and,
hardcoding it to on currently causes master to report unknown intr
with a mask of 0x08002000.
Ben Skeggs [Mon, 2 Dec 2013 03:43:09 +0000 (13:43 +1000)]
drm/nve0/fb/gddr5: parse bios data into struct rather than using directly
Still essentially a struct of magic values with magic names and unknown
purposes. But, we will shortly need to be able to mix and match bits of
the previous and next configurations to do a transition reclock, as such,
we can no longer directly use the vbios data with any ease.
This is probably nicer anyway in the long run, for a few reasons.
Ilia Mirkin [Sat, 7 Dec 2013 16:42:19 +0000 (11:42 -0500)]
drm/nouveau/falcon: use vmalloc to create firwmare copies
Some firmware images may be large (64K), so using kmalloc memory is
inappropriate for them. Use vmalloc instead, to avoid high-order
allocation failures.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org
Now that nouveau_bo.c can handle sync when it actually needs to, we can
remove this and avoid a double semaphore acquire when syncing in the
command submission path.
Commit de7b7d59d54852c introduced tiled GART, but a linear copy is
still performed. This may result in errors on eviction, fix it by
checking tiling from memtype.
Ben Skeggs [Fri, 15 Nov 2013 01:56:49 +0000 (11:56 +1000)]
drm/nouveau/vm: reduce number of entry-points to vm_map()
Pretty much everywhere had to make the decision which to use, so it
makes a lot more sense to just have one entrypoint decide the path
to take instead.
Takashi Iwai [Tue, 21 Jan 2014 22:34:51 +0000 (14:34 -0800)]
drm/cirrus: correct register values for 16bpp
When the mode is set with 16bpp on QEMU, the output gets totally broken.
The culprit is the bogus register values set for 16bpp, which was likely
copied from from a wrong place.
Jeff Mahoney [Tue, 21 Jan 2014 22:34:52 +0000 (14:34 -0800)]
drm/nouveau: make vga_switcheroo code depend on VGA_SWITCHEROO
Commit 8116188fdef594 ("nouveau/acpi: hook up to the MXM method for mux
switching.") broke the build on non-x86 architectures due to the new
dependency on MXM and MXM being an x86 platform driver.
It built previously since the vga switcheroo registration routines were
zereod out on !X86. The code was built in but unused.
This patch makes all of the DSM code depend on CONFIG_VGA_SWITCHEROO,
allowing it to build on non-x86 and shrinking the module size as well.
[rdunlap@infradead.org: fix build eror when VGA_SWITCHEROO is not enabled] Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Mon, 20 Jan 2014 10:17:37 +0000 (10:17 +0000)]
drm/i915: Repeat evictions whilst pageflip completions are outstanding
Since an old pageflip will keep its scanout buffer object pinned until
it has executed its unpin task on the common workqueue, we can clog up
our GGTT with stale pinned objects. As we cannot flush those workqueues
without dropping our locks, we have to resort to falling back to
userspace and telling them to repeat the operation in order to have a
chance to run our workqueues and free up the required memory. If we
fail, then we are forced to report ENOSPC back to userspace causing the
operation to fail and best-case scenario is that it introduces temporary
corruption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 20 Jan 2014 10:17:36 +0000 (10:17 +0000)]
drm/i915: Wait for completion of pending flips when starved of fences
On older generations (gen2, gen3) the GPU requires fences for many
operations, such as blits. The display hardware also requires fences for
scanouts and this leads to a situation where an arbitrary number of
fences may be pinned by old scanouts following a pageflip but before we
have executed the unpin workqueue. This is unpredictable by userspace
and leads to random EDEADLK when submitting an otherwise benign
execbuffer. However, we can detect when we have an outstanding flip and
so cause userspace to wait upon their completion before finally
declaring that the system is starved of fences. This is really no worse
than forcing the GPU to stall waiting for older execbuffer to retire and
release their fences before we can reallocate them for the next
execbuffer.
v2: move the test for a pending fb unpin to a common routine for
later reuse during eviction
Reported-and-tested-by: dimon@gmx.net
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73696 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
projects / karo-tx-linux.git / log