v8: None.
v7: Acked by Rob Herring.
v6:
- Cleanup values part of reg and clocks properties.
- Change "pclk_dsi" clock name to "pclk".
v5:
- Remove endpoint unit address of dsi output port.
- Add "hisilicon,noc-syscon" property for ADE NOC QoS syscon.
- Add "resets" property for ADE reset.
v4:
- Describe more specific of clocks and ports.
- Fix indentation.
v3:
- Make ade as the drm master node.
- Use assigned-clocks to set clock rate.
- Use ports to connect display relavant nodes.
v2:
- Move dt binding docs to bindings/display/hisilicon directory.
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org>
Dave Airlie [Fri, 29 Apr 2016 04:57:51 +0000 (14:57 +1000)]
Merge branch 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next
This adds very rudimentary TCON (timing controller for raw LCD displays)
support to enable the bypass mode in order to use the DCU controller on
Freescale/NXP Vybrid SoC's.
Additionally the register clock and pixel clock has been separated, but
are currently still enabled and disabled pairwise.
Other than that, fixes and cleanups accross the driver.
* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: increment version and date
drm/fsl-dcu: implement lastclose callback
drm/fsl-dcu: disable output polling on driver unload
drm/fsl-dcu: deallocate fbdev CMA on unload
drm/fsl-dcu: use variable name dev for struct drm_device
drm/fsl-dcu: handle missing panel gracefully
drm/fsl-dcu: detach panel on destroy
drm/layerscape: reduce excessive stack usage
drm/fsl-dcu: add TCON driver
drm/fsl-dcu: use common clock framework for pixel clock divider
drm/fsl-dcu: add extra clock for pixel clock
drm/fsl-dcu: disable clock on initialization failure and remove
Dave Airlie [Fri, 29 Apr 2016 04:52:41 +0000 (14:52 +1000)]
Merge tag 'sun4i-drm-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM driver for 4.7
This pull request introduces the sun4i driver, meant to be used on the
older Allwinner SoCs (A10, A13, A20, A23, A31 and A33).
It currently supports only the A13, which has one of the simplest video
pipeline. Support for other video components and SoCs will be added
eventually.
It supports only a RGB or composite output. It doesn't do HDMI, VGA, LVDS
or power management yet, but that will come in time as well.
* tag 'sun4i-drm-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
MAINTAINERS: Add a maintainer for the Allwinner DRM driver
drm: sun4i: tv: Add NTSC output standard
drm: sun4i: tv: Add PAL output standard
drm: sun4i: Add composite output
drm: sun4i: Add RGB output
drm: Add Allwinner A10 Display Engine support
drm: sun4i: Add DT bindings documentation
drm: fb: Add seq_file definition
Maxime Ripard [Thu, 29 Oct 2015 08:39:01 +0000 (09:39 +0100)]
drm: sun4i: Add composite output
Some Allwinner SoCs have an IP called the TV encoder that is used to output
composite and VGA signals. In such a case, we need to use the second TCON
channel.
Add support for that TV encoder.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Thu, 29 Oct 2015 08:37:32 +0000 (09:37 +0100)]
drm: sun4i: Add RGB output
One of the A10 display pipeline possible output is an RGB interface to
drive LCD panels directly. This is done through the first channel of the
TCON that will output our video signals directly.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Thu, 29 Oct 2015 08:36:23 +0000 (09:36 +0100)]
drm: Add Allwinner A10 Display Engine support
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.
Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Daniel Vetter [Fri, 22 Apr 2016 20:10:30 +0000 (22:10 +0200)]
drm: Switch blobs to the new generic modeset obj refcounting
Need to move the free function around a bit, but otherwise mostly
just removing code.
Specifically we can nuke all the _locked variants since the weak idr
reference is now protected by the idr_mutex, which we never hold
anywhere expect in the lookup/reg/unreg functions. And those never
call anything else.
Another benefit of this is that this patch switches the weak reference
logic from kref_put_mutex to kref_get_unless_zero. And the later is in
general more flexible wrt accomodating multiple weak references
protected by different locks, which might or might not come handy
eventually.
But one consequence of that switch is that we need to acquire the
blob_lock from the free function for the list_del calls. That's a bit
tricky to pull off, but works well if we pick the exact same scheme as
is already used for framebuffers. Most important changes:
- filp list is maintainer by create/destroy_blob ioctls directly
(already the case, so we can just remove the redundant list_del from
the free function).
- filp close handler walks the filp-private list lockless - works
because we know no one else can access it. I copied the same comment
from the fb code over to explain this.
- Otherwise we need to sufficiently restrict blob_lock critical
sections to avoid all the unreference calls. Easy to do once the
blob_lock only protects the list, and no longer the weak reference.
Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Fri, 22 Apr 2016 20:10:28 +0000 (22:10 +0200)]
drm: Fix fb leaks and WARN spew in get/set_prop ioctls
Dave Airlie had at least the refcount leak fixed in a later patch (but
that patch does other things which need a bit more work). But we still
have the trouble that silly userspace could hit the WARN_ON in
drm_mode_object_find.
Fix this all up to make sure we don't leak objects, and don't spew
into demsg.
Fixes: d0f37cf62979 ("drm/mode: move framebuffer reference into object.")
Testcase: igt/kms_addfb_basic/invalid-*-prop* Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Fri, 22 Apr 2016 20:10:27 +0000 (22:10 +0200)]
drm: Improve kerneldoc for new mode object refcounting
Slipped through the cracks in my review. The one issue I spotted
is that drm_mode_object_find now acquires references and can be
used on FB objects, which caused follow-on bugs in get/set_prop ioctls.
Follow-up patches will fix that.
[airlied: fixup some incr fb/decr object mixups]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Carlos Palminha [Fri, 19 Feb 2016 12:30:26 +0000 (15:30 +0300)]
drm: Add support of ARC PGU display controller
ARC PGU could be found on some development boards from Synopsys.
This is a simple byte streamer that reads data from a framebuffer
and sends data to the single encoder.
Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-snps-arc@lists.infradead.org
Stefan Agner [Sun, 17 Apr 2016 05:02:49 +0000 (22:02 -0700)]
drm/fsl-dcu: deallocate fbdev CMA on unload
Free fbdev CMA using drm_fbdev_cma_fini on unload. This fixes
a warning when unloading the driver:
WARNING: CPU: 0 PID: 164 at drivers/gpu/drm/drm_crtc.c:5930 drm_mode_config_cleanup+0x204/0x208
Stefan Agner [Wed, 13 Apr 2016 07:14:18 +0000 (00:14 -0700)]
drm/fsl-dcu: use variable name dev for struct drm_device
The driver uses different variable names for struct drm_device
across functions which is confusing. Stick to the more common
variable name dev. While at it, remove unnecessary if statement
in error handling.
Stefan Agner [Thu, 3 Dec 2015 02:03:50 +0000 (18:03 -0800)]
drm/fsl-dcu: handle missing panel gracefully
If the device tree property fsl,panel is missing, drm_panel_attach
is called with a NULL pointer as first argument. Having a panel is
basically mandatory since RGB is the only supported connector.
Check if a panel node has been found, return -ENODEV and cleanup
otherwise.
Arnd Bergmann [Mon, 22 Feb 2016 21:33:31 +0000 (22:33 +0100)]
drm/layerscape: reduce excessive stack usage
The fsl-dcu driver copies a drm_mode_config object to its
stack but then only accesses a single member (dpms_property)
once. The data structure is large enough to trigger a warning
about the amount of kernel stack being used:
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c: In function 'fsl_dcu_drm_connector_create':
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This changes the fsl_dcu_drm_connector_create() function to
only access the drm_mode_config by reference, which is also
more efficient.
Stefan Agner [Wed, 2 Dec 2015 22:39:40 +0000 (14:39 -0800)]
drm/fsl-dcu: add TCON driver
Add driver for the TCON (timing controller) module. The TCON module
is a separate module attached after the DCU (display controller
unit). Each DCU instance has its own, directly connected TCON
instance. The DCU's RGB and timing signals are passing through
the TCON module. TCON can provide timing signals for raw TFT panels
or operate in a bypass mode which leaves all signals unaltered.
The driver currently only supports the bypass mode.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stefan Agner <stefan@agner.ch>
Stefan Agner [Wed, 23 Mar 2016 01:06:08 +0000 (18:06 -0700)]
drm/fsl-dcu: use common clock framework for pixel clock divider
Use the common clock framework to calculate the pixel clock
dividier. The previous implementation rounded down the calculated
factor. Thanks to the CLK_DIVIDER_ROUND_CLOSEST flag using the
common clock framework divider implementation improves the pixel
clock accuracy in some cases. Ontop of that it also allows to see
the actual pixel clock in the sysfs clock summary.
Stefan Agner [Tue, 22 Mar 2016 22:45:29 +0000 (15:45 -0700)]
drm/fsl-dcu: add extra clock for pixel clock
The Vybrid DCU variant has two independent clock inputs, one
for the registers (IPG bus clock) and one for the pixel clock.
Support this distinction in the DCU DRM driver while staying
backward compatible for old device trees.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stefan Agner <stefan@agner.ch>
Simon Horman [Fri, 25 Mar 2016 01:38:28 +0000 (10:38 +0900)]
drm: rcar-du: Use ARCH_RENESAS
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Arnd Bergmann [Fri, 26 Feb 2016 11:52:20 +0000 (12:52 +0100)]
drm: rcar-du: Clarify vsp dependency
The VSP1 compositor code in DRM links against the respective V4L
driver, but the dependency is not expressed correctly in Kconfig,
which leads to a build error when the DRM driver is built-in
and the V4L driver is a module:
drivers/gpu/built-in.o: In function `rcar_du_vsp_plane_atomic_update':
rcar-du/rcar_du_vsp.c:183: undefined reference to `vsp1_du_atomic_update'
This patch avoids the problem by ensuring that the DRM VSP code can
only be enabled if the V4L driver is linked into the kernel, or
both are loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6d62ef3ac30b ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Dave Airlie [Fri, 15 Apr 2016 05:10:41 +0000 (15:10 +1000)]
drm/modes: reduce fb_lock to just protecting lists
This reduces the fb_lock to just protecting the num_fb/fb_list.
"Previously fb refcounting, and especially the weak reference
(kref_get_unless_zero) used in fb lookups have been protected by fb_lock.
But with the refactoring to share refcounting in the drm_mode_object base
class that switched to being protected by idr_mutex, which means fb_lock
critical sections can be reduced."
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 15 Apr 2016 05:10:40 +0000 (15:10 +1000)]
drm/modes: move reference taking into object lookup.
When we lookup an ref counted object we now take a proper reference
using kref_get_unless_zero.
Framebuffer lookup no longer needs do this itself.
Convert rmfb to using framebuffer lookup and deal with the fact
it now gets an extra reference that we have to cleanup. This should
mean we can avoid holding fb_lock across rmfb. (if I'm wrong let me
know).
We also now only hold the fbs_lock around the list manipulation.
"Previously fb refcounting, and especially the weak reference
(kref_get_unless_zero) used in fb lookups have been protected by fb_lock.
But with the refactoring to share refcounting in the drm_mode_object base
class that switched to being protected by idr_mutex, which means fb_lock
critical sections can be reduced."
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 15 Apr 2016 05:10:39 +0000 (15:10 +1000)]
drm/mode: reduce lock hold in addfb2
No need to hold the lock while assigning the variable.
Daniel wrote:
"Not sure why exactly I put that under the lock, but the only thing that
can race here is rmfb while addfb2 is still doing it's thing, with a
correctly guess (easy to do since they're fully deterministic) fb_id."
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 15 Apr 2016 05:10:38 +0000 (15:10 +1000)]
drm/mode: reduce scope of fb_lock in framebuffer init
We don't need to hold the fb lock around the initialisation,
only around the list manipulaton.
So do the lock hold only around the register for now.
From Daniel:
Previously fb refcounting, and especially the weak reference
(kref_get_unless_zero) used in fb lookups have been protected by fb_lock.
But with the refactoring to share refcounting in the drm_mode_object base
class that switched to being protected by idr_mutex, which means fb_lock
critical sections can be reduced.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 15 Apr 2016 05:10:36 +0000 (15:10 +1000)]
drm/mode: move framebuffer reference into object.
This is the initial code to add references to some mode objects.
In the future we need to start reference counting connectors so
firstly I want to reorganise the code so the framebuffer ref counting
uses the same paths.
This patch shouldn't change any functionality, just moves the kref.
[airlied: move kerneldoc as well] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 21 Apr 2016 23:03:31 +0000 (09:03 +1000)]
Merge tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel into drm-next
- make modeset hw state checker atomic aware (Maarten)
- close races in gpu stuck detection/seqno reading (Chris)
- tons&tons of small improvements from Chris Wilson all over the gem code
- more dsi/bxt work from Ramalingam&Jani
- macro polish from Joonas
- guc fw loading fixes (Arun&Dave)
- vmap notifier (acked by Andrew) + i915 support by Chris Wilson
- create bottom half for execlist irq processing (Chris Wilson)
- vlv/chv pll cleanup (Ville)
- rework DP detection, especially sink detection (Shubhangi Shrivastava)
- make color manager support fully atomic (Maarten)
- avoid livelock on chv in execlist irq handler (Chris)
* tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel: (82 commits)
drm/i915: Update DRIVER_DATE to 20160411
drm/i915: Avoid allocating a vmap arena for a single page
drm,i915: Introduce drm_malloc_gfp()
drm/i915/shrinker: Restrict vmap purge to objects with vmaps
drm/i915: Refactor duplicate object vmap functions
drm/i915: Consolidate common error handling in intel_pin_and_map_ringbuffer_obj
drm/i915/dmabuf: Tighten struct_mutex for unmap_dma_buf
drm/i915: implement WaClearTdlStateAckDirtyBits
drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit
drm/i915: Rename hw state checker to hw state verifier.
drm/i915: Move modeset state verifier calls.
drm/i915: Make modeset state verifier take crtc as argument.
drm/i915: Replace manual barrier() with READ_ONCE() in HWS accessor
drm/i915: Use simplest form for flushing the single cacheline in the HWS
drm/i915: Harden detection of missed interrupts
drm/i915: Separate out the seqno-barrier from engine->get_seqno
drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+
drm/i915: Fixup the free space logic in ring_prepare
drm/i915: Simplify check for idleness in hangcheck
drm/i915: Apply a mb between emitting the request and hangcheck
...
Dave Airlie [Thu, 21 Apr 2016 20:06:02 +0000 (06:06 +1000)]
Merge tag 'topic/drm-misc-2016-04-21' of git://anongit.freedesktop.org/drm-intel into drm-next
misc pull req all over. Biggest thing is the
drm_connector_(un)register_all cleanup from Alexey for drivers without the
load/unload midlayer hooks. I.e. all the new ones, and a bunch of the
pending new atomic drivers depend upon this. Or at least I asked them to
rebase ;-)
* tag 'topic/drm-misc-2016-04-21' of git://anongit.freedesktop.org/drm-intel:
drm: Make drm.debug parameter description more helpful
drm: Remove warning from drm_connector_unregister_all()
drm: probe_helper: Hide ugly ifdef
drm: rcar-du: Use generic drm_connector_register_all() helper
drm: atmel_hldc: Use generic drm_connector_register_all() helper
drm: Introduce drm_connector_register_all() helper
drm: fix lut value extraction function
drm/atomic-helper: Print an error if vblank wait times out
drm/dp/mst: Restore primary hub guid on resume
drm: Release driver references to handle before making it available again
drm/i915/dp/mst: Add source port info to debugfs output
drm/dp/mst: Enhance DP MST debugfs output
drm/edid: Add drm_edid_get_monitor_name()
include/drm: Reword debug categories comment.
drm/crtc_helper: Reset empty plane state in drm_helper_crtc_mode_set_base()
drm/virtio: Drop dummy gamma table support
drm/bochs: Drop fake gamma support
drm/core: Fix ordering in drm_mode_config_cleanup.
Dave Airlie [Thu, 21 Apr 2016 19:58:31 +0000 (05:58 +1000)]
Merge tag 'topic/struct_mutex-2016-04-21' of git://anongit.freedesktop.org/drm-intel into drm-next
struct_mutex cleanups and error paths fixes. Unfortunately I didn't manage
to get acks from everyone, but this stuff has been hanging out for months
now and imo simple enough to just land the remaining few patches. But
separate pull request so that you can take a look yourself.
* tag 'topic/struct_mutex-2016-04-21' of git://anongit.freedesktop.org/drm-intel:
drm/vma_manage: Drop has_offset
drm/vgem: Drop dev->struct_mutex
drm/vgem: Move get_pages to gem_create
drm/vgem: Simplify dumb_map
drm/exynos: drop struct_mutex from fbdev setup
drm/exynos: drop struct_mutex from exynos_drm_gem_get_ioctl
drm/exynos: drop struct_mutex from exynos_gem_map_sgt_with_dma
drm/exynos: Drop dev->struct_mutex from mmap offset function
drm/nouveau: Drop dev->struct_mutex from fbdev init
drm/qxl: Use unlocked gem unreferencing
drm/omapdrm: Use unlocked gem unreferencing
drm/nouveau: Use unlocked gem unreferencing
drm: Make drm.debug parameter description more helpful
Let's be user-friendly and print an actually helpful parameter
description.
This makes modinfo output the debug parameter like this:
parm: debug:Enable debug output, where each bit enables a debug category.
Bit 0 (0x01) will enable CORE messages (drm core code)
Bit 1 (0x02) will enable DRIVER messages (drm controller code)
Bit 2 (0x04) will enable KMS messages (modesetting code)
Bit 3 (0x08) will enable PRIME messages (prime code)
Bit 4 (0x10) will enable ATOMIC messages (atomic code)
Bit 5 (0x20) will enable VBL messages (vblank code) (int)
Changes from v1:
* Fixed s/PRMIE/PRIME typo.
* Add ATOMIC and VBL debug parameter documentation.
* Prefix the continuation lines with two tabs and
removed the last new line.
* Remove spurious whitespace.
drm: Remove warning from drm_connector_unregister_all()
Commit 6c87e5c3ec6d ("drm: Rename drm_connector_unplug_all() to
drm_connector_unregister_all()") replaced a manual connectors list walk
in drm_connector_unregister_all() with drm_for_each_connector(). The
list was walked without the mode config mutex locked as that ends up in
a clash with sysfs, but drm_connector_unregister_all() warns when the
mutex isn't locked.
The problem is known and doesn't require a large warning every time
drm_connector_unregister_all() is called. Fix it by reverting to manual
list walk.
Push the ifdef to the drm_edid.h and create a stub, for the
DRM_LOAD_EDID_FIRMWARE=n case. This removes some clutter in
the code, making it more readable.
drm: rcar-du: Use generic drm_connector_register_all() helper
Now that a generic drm_connector_register_all() helper exists we may safely
substitute it for the driver-specific implementation of connectors plugging
in sysfs.
Daniel Vetter [Wed, 30 Mar 2016 09:40:52 +0000 (11:40 +0200)]
drm/vma_manage: Drop has_offset
It's racy, creating mmap offsets is a slowpath, so better to remove it
to avoid drivers doing broken things.
The only user is i915, and it's ok there because everything (well
almost) is protected by dev->struct_mutex in i915-gem.
While at it add a note in the create_mmap_offset kerneldoc that
drivers must release it again. And then I also noticed that
drm_gem_object_release entirely lacks kerneldoc.
Daniel Vetter [Wed, 30 Mar 2016 09:40:50 +0000 (11:40 +0200)]
drm/vgem: Move get_pages to gem_create
vgem doesn't have a shrinker or anything like that and drops backing
storage only at object_free time. There's no use in trying to be
clever and allocating backing storage delayed, it only causes trouble
by requiring locking.
Instead grab pages when we allocate the object right away.
Daniel Vetter [Wed, 30 Mar 2016 09:40:47 +0000 (11:40 +0200)]
drm/exynos: drop struct_mutex from exynos_drm_gem_get_ioctl
The only things this protects is reading ->flags and ->size, both of
which are invariant over the lifetime of an exynos gem bo. So no
locking needed at all (besides that, nothing protects the writers
anyway).
Aside: exynos_gem_obj->size is redundant with
exynos_gem_obj->base.size and probably should be removed.
Daniel Vetter [Wed, 30 Mar 2016 09:40:45 +0000 (11:40 +0200)]
drm/exynos: Drop dev->struct_mutex from mmap offset function
Simply forgotten about this when I was doing my general cleansing of
simple gem mmap offset functions. There's nothing but core functions
called here, and they all have their own protection already.
Aside: DRM_ERROR for userspace controlled input isn't great, but
that's for another patch.
Daniel Vetter [Wed, 30 Mar 2016 09:40:42 +0000 (11:40 +0200)]
drm/qxl: Use unlocked gem unreferencing
For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with
Daniel Vetter [Wed, 30 Mar 2016 09:40:41 +0000 (11:40 +0200)]
drm/omapdrm: Use unlocked gem unreferencing
For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with
Daniel Vetter [Wed, 30 Mar 2016 09:40:40 +0000 (11:40 +0200)]
drm/nouveau: Use unlocked gem unreferencing
For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with
When extracting the value at full precision (16 bits), no need to
round the value.
This was spotted by Jani when running sparse. Unfortunately this fix
doesn't get rid of the warning.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reported-by: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Fixes: 5488dc16fde7 ("drm: introduce pipe color correction properties") Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458655833-19547-1-git-send-email-lionel.g.landwerlin@intel.com
Some hubs are forgetful, and end up forgetting whatever GUID we set
previously after we do a suspend/resume cycle. This can lead to
hotplugging breaking (along with probably other things) since the hub
will start sending connection notifications with the wrong GUID. As
such, we need to check on resume whether or not the GUID the hub is
giving us is valid.
Chris Wilson [Fri, 15 Apr 2016 11:55:08 +0000 (12:55 +0100)]
drm: Release driver references to handle before making it available again
When userspace closes a handle, we remove it from the file->object_idr
and then tell the driver to drop its references to that file/handle.
However, as the file/handle is already available again for reuse, it may
be reallocated back to userspace and active on a new object before the
driver has had a chance to drop the old file/handle references.
Whilst calling back into the driver, we have to drop the
file->table_lock spinlock and so to prevent reusing the closed handle we
mark that handle as stale in the idr, perform the callback and then
remove the handle. We set the stale handle to point to the NULL object,
then any idr_find() whilst the driver is removing the handle will return
NULL, just as if the handle is already removed from idr.
Note: This will be used to have a direct handle -> vma lookup table,
instead of first a handle -> obj lookup, and then an (obj, vm) -> vma
lookup.
v2: Use NULL rather than an ERR_PTR to avoid having to adjust callers.
idr_alloc() tracks existing handles using an internal bitmap, so we are
free to use the NULL object as our stale identifier.
v3: Needed to update the return value check after changing from using
the stale error pointer to NULL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com>
[danvet: Add note about the use-case.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460721308-32405-1-git-send-email-chris@chris-wilson.co.uk
Jim Bride [Thu, 14 Apr 2016 17:18:36 +0000 (10:18 -0700)]
drm/dp/mst: Enhance DP MST debugfs output
Add some additional information (input vs. output port, sink associated
with VC, peer device type, max number of VCs supported) and ensure that
any embedded '\0' characters in a branch device's devid string are not
written to debugfs.
v2: Rebase + change drm_edid_get_monitor_name() call to reflect new
signature.
Jim Bride [Thu, 14 Apr 2016 17:18:35 +0000 (10:18 -0700)]
drm/edid: Add drm_edid_get_monitor_name()
In order to include monitor name information in debugfs
output we needed to add a function that would extract the
monitor name from the EDID, and that function needed to
reside in the file where the rest of the EDID helper
functions are implemented.
v2: Refactor to have drm_edid_get_monitor_name() and drm_edid_to_eld()
use a common helper function to extract the monitor name from the
edid. [Jani] + rebase.
v3: Minor changes suggested by Jani + rebase.
v4: Few more minor changes suggested by Jani + rebase.
Boris Brezillon [Tue, 5 Jan 2016 17:27:49 +0000 (18:27 +0100)]
drm: atmel-hlcdc: check display mode validity in crtc->mode_fixup()
Move the adjusted display mode check into ->mode_fixup().
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris Brezillon [Wed, 6 Jan 2016 10:14:15 +0000 (11:14 +0100)]
drm: atmel-hlcdc: move output mode selection in CRTC implementation
In order to support multiple outputs we need to move the output mode
selection to the CRTC object, so that the output validity check can be
done against the drm_atomic_state.
If the connectors selected by a specific mode setting are requiring
incompatible bus format the atomic operation is aborted (->atomic_check()
returns -EINVAL).
In order to implement that, we need to define our own CRTC state and
overload default ->reset(), ->atomic_duplicate_state() and
->atomic_destroy_state() functions.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris Brezillon [Tue, 5 Jan 2016 17:11:39 +0000 (18:11 +0100)]
drm: atmel-hlcdc: support extended timing ranges on sama5d4 and sama5d2
The display timings on old SoCs older than the sama5d4 are quite limited
and prevent the use of many displays. Add support for extended timing
ranges on sama5d2 and sama5d4.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris Brezillon [Mon, 4 Jan 2016 13:53:35 +0000 (14:53 +0100)]
drm: atmel-hlcdc: remove leftovers from atomic mode setting migration
The ->dpms field is no longer used and can be removed.
The same goes for the dummy ->mode_fixup() implementation which always
returns true.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris Brezillon [Thu, 31 Dec 2015 17:24:09 +0000 (18:24 +0100)]
drm: atmel-hlcdc: fix connector and encoder types
The hlcdc IP keep the pixel stream in raw RGB mode, and does not provide
any specific connector. Since DRM_MODE_CONNECTOR_RAW_RGB does not exist,
use DRM_MODE_CONNECTOR_Unknown.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Liu Ying [Tue, 5 Apr 2016 08:50:39 +0000 (16:50 +0800)]
drm/crtc_helper: Reset empty plane state in drm_helper_crtc_mode_set_base()
Transitional drivers might access the NULL pointer plane->state in
drm_helper_crtc_mode_set_base(), which causes NULL pointer dereference.
So, let's reset it before handing it over to those drivers.
commit e4f31ad2b713 ("drm: reset empty state in transitional helpers")
did the same thing for other transitional helpers, but it seems this one
was missed.
Dave Airlie [Thu, 14 Apr 2016 03:07:12 +0000 (13:07 +1000)]
Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-next
A few fixes and cleanups for 4.7 that's been collecting dust in my
inbox for a while.
* 'gma500-next' of git://github.com/patjak/drm-gma500:
drm/gma500/mdfld_dsi: remove bogus if check
drm/gma500: Fix possible out of bounds read
drm/gma500: fix double freeing
Daniel Vetter [Wed, 30 Mar 2016 09:51:19 +0000 (11:51 +0200)]
drm/bochs: Drop fake gamma support
Only really needed for fbdev emulation at 8bpp. And bochs doesn't do
that. And either way bochs only does 32bit rgb, so this is all pretty
much wasted dead code.
The only consideration is that we need to not set up any gamma size
either.
drm/core: Fix ordering in drm_mode_config_cleanup.
__drm_atomic_helper_plane_destroy_state calls
drm_framebuffer_unreference, which means that if drm_framebuffer_free
is called before plane->destroy freed memory will be accessed.
A similar case happens for the blob list, which was freed before the
crtc state was, resulting in the unreference_blob from crtc_destroy_state
pointing to garbage memory causing another opportunity for a GPF.
Daniel Vetter [Mon, 11 Apr 2016 17:21:06 +0000 (19:21 +0200)]
Merge tag 'v4.6-rc3' into drm-intel-next-queued
Linux 4.6-rc3
Backmerge requested by Chris Wilson to make his patches apply cleanly.
Tiny conflict in vmalloc.c with the (properly acked and all) patch in
drm-intel-next:
Chris Wilson [Fri, 8 Apr 2016 11:11:14 +0000 (12:11 +0100)]
drm/i915: Avoid allocating a vmap arena for a single page
If we want a contiguous mapping of a single page sized object, we can
forgo using vmap() and just use a regular kmap(). Note that this is only
suitable if the desired pgprot_t is compatible.
Chris Wilson [Fri, 8 Apr 2016 11:11:13 +0000 (12:11 +0100)]
drm,i915: Introduce drm_malloc_gfp()
I have instances where I want to use drm_malloc_ab() but with a custom
gfp mask. And with those, where I want a temporary allocation, I want to
try a high-order kmalloc() before using a vmalloc().
We now have two implementations for vmapping a whole object, one for
dma-buf and one for the ringbuffer. If we couple the mapping into the
obj->pages lifetime, then we can reuse an obj->mapping for both and at
the same time couple it into the shrinker. There is a third vmapping
routine in the cmdparser that maps only a range within the object, for
the time being that is left alone, but will eventually use these routines
in order to cache the mapping between invocations.
v2: Mark the failable kmalloc() as __GFP_NOWARN (vsyrjala)
v3: Call unpin_vmap from the right dmabuf unmapper
v4: Rename vmap to map as we don't wish to imply the type of mapping
involved, just that it contiguously maps the object into kernel space.
Add kerneldoc and lockdep annotations