Arnd Bergmann [Sun, 8 Oct 2006 22:08:00 +0000 (00:08 +0200)]
USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter
This driver adds support for the DeLOCK USB ethernet adapter
and potentially others based on the MosChip MCS7830 chip.
It is based on the usbnet and asix drivers as well as the
original device driver provided by MosChip, which in turn
was based on the usbnet driver.
It has been tested successfully on an OHCI, but interestingly
there seems to be a problem with the mcs7830 when connected to
the ICH6/EHCI in my thinkpad: it keeps receiving lots of
broken packets in the RX interrupt. The problem goes away when
I'm using an active USB hub, so I assume it's not related to
the device driver, but rather to the hardware.
Alan Stern [Tue, 10 Oct 2006 14:54:00 +0000 (10:54 -0400)]
UHCI: workaround for Asus motherboard
This patch (as798) adds a workaround to uhci-hcd. At least one Asus
motherboard is wired in such a way that any device attached to a
suspended UHCI controller will prevent the system from entering
suspend-to-RAM by immediately waking it up. The only way around the
problem is to turn the controller off instead of suspending it.
This fixes Bugzilla #6193.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Thu, 5 Oct 2006 07:04:11 +0000 (09:04 +0200)]
USB: fix suspend support for usblp
this implements suspend support for usblp. According to the CUPS people
ENODEV will make CUPS retry the job. Thus it is returned in the runtime
case. My printer survives suspend/resume cycles with it.
Duncan Sands [Thu, 5 Oct 2006 08:40:55 +0000 (10:40 +0200)]
speedtch: "extended reach"
The speedtouch modem setup code was reverse engineered many years
ago from a prehistoric windows driver. Less ancient windows drivers,
even those from a few years ago, perform extra initialization steps
which this patch adds to the linux driver. David Woodhouse observed
that this initialization along with the firmware bin/sachu3/zzzlp2.eni
from the driver at
http://www.speedtouch.co.uk/downloads/330/301/UK3012%20Extended.zip
improves line sync speeds by about 20%. He provided the original
patch, which I've modified to use symbolic names (BMaxDSL, ModemMode,
ModemOption) rather than magic numbers. These names may not seem like
much of an improvement (after all, what is "ModemOption" exactly?),
but they do have one big advantage: they are the names used in the
windows registry. I've made them available as module parameters.
Thanks are due to Aurelio Arroyo, who noticed the relationship
between these magic numbers and the entries in Phonebook.ini.
Duncan Sands [Thu, 5 Oct 2006 07:56:44 +0000 (09:56 +0200)]
usbatm: fix tiny race
If usbatm_do_heavy_init finishes before usbatm_heavy_init
writes the pid, the disconnect method could shoot down the
wrong process if the pid has been recycled.
matthieu castet [Tue, 3 Oct 2006 19:44:11 +0000 (21:44 +0200)]
UEAGLE : comestic changes
Hi,
this patch does some cosmetic changes :
- dump firwmare version as soon as possible and export it on sysfs
- hint about wrong cmv/dsp
- Display a message to warn user when the modem is ready : it can help
people to detect problems on the line without debug trace
- Fix wrong indent
- display modem type (pots/isdn)
- increase version number
matthieu castet [Tue, 3 Oct 2006 19:49:29 +0000 (21:49 +0200)]
UEAGLE : use interruptible sleep
this patch use wait_event_interruptible_timeout and msleep_interruptible
beacause uninterruptible sleep (task state 'D') is counted as 1 towards
load average, like running processes.
David Brownell [Mon, 2 Oct 2006 14:20:10 +0000 (07:20 -0700)]
USB: ohci-pnx4008 build fixes
The OHCI bus glue for the Philips PNX chips is missing a few calls.
- Bus suspend/resume were wrongly omitted in the original submission.
- Two new calls were added since that glue was submitted:
* Root hub irq enable call
* Shutdown hook for usbcore
Plus usb_bus.hcpriv has now been removed from usbcore.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Sesterhenn [Wed, 4 Oct 2006 16:56:44 +0000 (09:56 -0700)]
USB: fix use after free in wacom_sys.c
the following commit added a use after free
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3D3bea733ab21247290bd552dd6a2cd3049af9adef
Found by coverity (cid #1441)
When using flow control, the PHY needs to accept multicast pause frames.
Without this fix, these frames were getting discarded by the PHY before
doing any flow control.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Under high load it is possible to make the receiver FIFO get overloaded.
The driver/hardware recover properly, so there is no reason to fill the log
with lots of extra messages, just update counter.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
The result of flow control negotiation should not limit the next
negotiatition. If board is plugged into an old half duplex 10Mbit port,
without pause, then replugged into a gigabit port, it should negotiate
what is desired, not inherit that last negotiation.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
When PHY is turned off on shutdown, it causes the IRQ to get stuck on.
Make sure and disable the IRQ first, and if IRQ occurs when device
is not running, don't access PHY because that will hang.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Linus Torvalds [Tue, 17 Oct 2006 15:20:57 +0000 (08:20 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Check for offline nodes in pci NUMA code
[POWERPC] Better check in show_instructions
[POWERPC] POWER6 has 6 PMCs
[POWERPC] Never panic when taking altivec exceptions from userspace
[POWERPC] Fix IO Window Updates on P2P bridges.
[POWERPC] Add Makefile entry for MPC832x_mds support
[POWERPC] Fix MPC8360EMDS PB board support
[POWERPC] ppc: Add missing calls to set_irq_regs
[POWERPC] Off-by-one in /arch/ppc/platforms/mpc8*
[POWERPC] Add DOS partition table support to mpc834x_itx_defconfig
[POWERPC] spufs: fix support for read/write on cntl
[POWERPC] Don't crash on cell with 2 BEs when !CONFIG_NUMA
Jeff Garzik [Tue, 17 Oct 2006 07:10:39 +0000 (00:10 -0700)]
[PATCH] ISDN: fix drivers, by handling errors thrown by ->readstat()
This is a particularly ugly on-failure bug, possibly security, since the
lack of error handling here is covering up another class of bug: failure to
handle copy_to_user() return values.
The I4L API function ->readstat() returns an integer, and by looking at
several existing driver implementations, it is clear that a negative return
value was meant to indicate an error.
Given that several drivers already return a negative value indicating an
errno-style error, the current code would blindly accept that [negative]
value as a valid amount of bytes read. Obvious damage ensues.
Correcting ->readstat() handling to properly notice errors fixes the
existing code to work correctly on error, and enables future patches to
more easily indicate errors during operation.
Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Karsten Keil <kkeil@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Neil Brown [Tue, 17 Oct 2006 07:10:35 +0000 (00:10 -0700)]
[PATCH] Convert cpu hotplug notifiers to use raw_notifier instead of blocking_notifier
The use of blocking notifier by _cpu_up and _cpu_down in cpu.c has two
problem.
1/ An interaction with the workqueue notifier causes lockdep to spit a
warning.
2/ A notifier could conceivable be added or removed while _cpu_up or
_cpu_down are in process. As each notifier is called twice (prepare
then commit/abort) this could be unhealthy.
To fix to we simply take cpu_add_remove_lock while adding or removing
notifiers to/from the list.
This makes the 'blocking' usage unnecessary as all accesses to cpu_chain
are now protected by cpu_add_remove_lock. So change "blocking" to "raw" in
all relevant places. This fixes 1.
Credit: Andrew Morton Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> (reporter) Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In copy_process(), dup_task_struct() also duplicates the ->pi_lock,
->pi_waiters and ->pi_blocked_on members. rt_mutex_debug_task_free()
called from free_task() validates these members. However free_task() can
be invoked before these members are reset for the new task.
Move the initialization code before the first bail that can hit free_task().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Greg Banks [Tue, 17 Oct 2006 07:10:30 +0000 (00:10 -0700)]
[PATCH] kbuild: allow multi-word $M in Makefile.modpost
Some people want to do crazy things like pass multiple directories as the
value of $(SUBDIRS) or $M. Mostly this kinda works, except that
Makefile.modpost constructs a modpost commandline which fails modpost's
argument parsing. This patch fixes that little wrinkle.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Handle errors thrown in disk_sysfs_symlinks(), and propagate back to
caller.
The callers and associated functions don't do a real good job of handling
kobject errors anyway (add_partition, register_disk, rescan_partitions), so
this should do until something better comes along.
Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jan Kara [Tue, 17 Oct 2006 07:10:19 +0000 (00:10 -0700)]
[PATCH] Fix IO error reporting on fsync()
When IO error happens on metadata buffer, buffer is freed from memory and
later fsync() is called, filesystems like ext2 fail to report EIO. We
solve the problem by introducing a pointer to associated address space into
the buffer_head. When a buffer is removed from a list of metadata buffers
associated with an address space, IO error is transferred from the buffer to
the address space, so that fsync can later report it.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Tue, 17 Oct 2006 07:10:18 +0000 (00:10 -0700)]
[PATCH] knfsd: Allow lockd to drop replies as appropriate
It is possible for the ->fopen callback from lockd into nfsd to find that an
answer cannot be given straight away (an upcall is needed) and so the request
has to be 'dropped', to be retried later. That error status is not currently
propagated back.
So:
Change nlm_fopen to return nlm error codes (rather than a private
protocol) and define a new nlm_drop_reply code.
Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply
when this error comes back.
Cause svc_process to drop a request which returns a status of
rpc_drop_reply.
[akpm@osdl.org: fix warning storm] Cc: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Tue, 17 Oct 2006 07:10:17 +0000 (00:10 -0700)]
[PATCH] knfsd: Fix bug in recent lockd patches that can cause reclaim to fail
When an nfs server shuts down, lockd needs to release all the locks even
though the client still holds them.
It should therefore not 'unmonitor' the clients, so that the files in nfs/sm
will still be there when the nfs server restarts, so that those clients will
be told to reclaim their locks.
However the hosts are fully unmonitored, so statd may well remove the files.
lockd has a test for 'sm_sticky' and avoid the unmonitor call if it is set,
but it is currently not set.
So set it when tearing down lockd.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
J. Bruce Fields [Tue, 17 Oct 2006 07:10:16 +0000 (00:10 -0700)]
[PATCH] knfsd: nfsd4: Fix error handling in nfsd's callback client
Coverity noticed that the error handling code in the NFSv4 callback client
sets cb->cb_client to NULL, then calls rpc_shutdown_client with the NULL
pointer.
Coverity: #cid 1397
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
J. Bruce Fields [Tue, 17 Oct 2006 07:10:14 +0000 (00:10 -0700)]
[PATCH] knfsd: nfsd4: fix open permission checking
We weren't actually checking for SHARE_ACCESS_WRITE, with the result that the
owner could open a non-writeable file for write!
Continue to allow DENY_WRITE only with write access.
Thanks to Jim Rees for reporting the bug.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
J. Bruce Fields [Tue, 17 Oct 2006 07:10:13 +0000 (00:10 -0700)]
[PATCH] knfsd: nfsd4: fix owner-override on open
If a client creates a file using an open which sets the mode to 000, or if a
chmod changes permissions after a file is opened, then situations may arise
where an NFS client knows that some IO is permitted (because a process holds
the file open), but the NFS server does not (because it doesn't know about the
open, and only sees that the IO conflicts with the current mode of the file).
As a hack to solve this problem, NFS servers normally allow the owner to
override permissions on IO. The client can still enforce correct
permissions-checking on open by performing an explicit access check.
In NFSv4 the client can rely on the explicit on-the-wire open instead of an
access check.
Therefore we should not be allowing the owner to override permissions on an
over-the-wire open!
However, we should still allow the owner to override permissions in the case
where the client is claiming an open that it already made either before a
reboot, or while it was holding a delegation.
Thanks to Jim Rees for reporting the bug.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Miklos Szeredi [Tue, 17 Oct 2006 07:10:12 +0000 (00:10 -0700)]
[PATCH] fuse: fix dereferencing dentry parent
There's no locking for ->d_revalidate, so fuse_dentry_revalidate() should use
dget_parent() instead of simply dereferencing ->d_parent.
Due to topology changes in the directory tree the parent could become negative
or be destroyed while being used. There hasn't been any reports about this
yet.
Miklos Szeredi [Tue, 17 Oct 2006 07:10:11 +0000 (00:10 -0700)]
[PATCH] fuse: fix handling of moved directory
Fuse considered it an error (EIO) if lookup returned a directory inode, to
which a dentry already refered. This is because directory aliases are not
allowed.
But in a network filesystem this could happen legitimately, if a directory is
moved on a remote client. This patch attempts to relax the restriction by
trying to first evict the offending alias from the cache. If this fails, it
still returns an error (EBUSY).
A rarer situation is if an mkdir races with an indenpendent lookup, which
finds the newly created directory already moved. In this situation the mkdir
should return success, but that would be incorrect, since the dentry cannot be
instantiated, so return EBUSY.
Previously checking for a directory alias and instantiation of the dentry
weren't done atomically in lookup/mkdir, hence two such calls racing with each
other could create aliased directories. To prevent this introduce a new
per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations
with a directory inode.
Miklos Szeredi [Tue, 17 Oct 2006 07:10:09 +0000 (00:10 -0700)]
[PATCH] fuse: fix spurious BUG
Fix a spurious BUG in an unlikely race, where at least three parallel lookups
return the same inode, but with different file type. This has not yet been
observed in real life.
Allowing unlimited retries could delay fuse_iget() indefinitely, but this is
really for the broken userspace filesystem to worry about.
Miklos Szeredi [Tue, 17 Oct 2006 07:10:08 +0000 (00:10 -0700)]
[PATCH] fuse: locking fix for nlookup
An inode could be returned by independent parallel lookups, in this case an
update of the lookup counter could be lost resulting in a memory leak in
userspace.
Miklos Szeredi [Tue, 17 Oct 2006 07:10:07 +0000 (00:10 -0700)]
[PATCH] document i_size_write locking rules
Unless someone reads the documentation for write_seqcount_{begin,end} it is
not obvious, that i_size_write() needs locking. Especially, that lack of such
locking can result in a system hang.
Miklos Szeredi [Tue, 17 Oct 2006 07:10:06 +0000 (00:10 -0700)]
[PATCH] fuse: fix hang on SMP
Fuse didn't always call i_size_write() with i_mutex held which caused rare
hangs on SMP/32bit. This bug has been present since fuse-2.2, well before
being merged into mainline.
The simplest solution is to protect i_size_write() with the per-connection
spinlock. Using i_mutex for this purpose would require some restructuring of
the code and I'm not even sure it's always safe to acquire i_mutex in all
places i_size needs to be set.
Since most of vmtruncate is already duplicated for other reasons, duplicate
the remaining part as well, making all i_size_write() calls internal to fuse.
Using i_size_write() was unnecessary in fuse_init_inode(), since this function
is only called on a newly created locked inode.
Reported by a few people over the years, but special thanks to Dana Henriksen
who was persistent enough in helping me debug it.
Andrew Morton [Tue, 17 Oct 2006 07:09:59 +0000 (00:09 -0700)]
[PATCH] swsusp: fix memory leaks
My fancy new swsusp IO code had a big memory leak. It's somewhat invisible
because the whole mem_map[] gets overwritten after resume, but it can cause us
to get low on memory during the actual suspend process.
Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Tue, 17 Oct 2006 07:09:58 +0000 (00:09 -0700)]
[PATCH] acpi_processor_latency_notifier(): UP warning fix
drivers/acpi/processor_idle.c:1112: warning: 'smp_callback' defined but not used
Cc: Len Brown <lenb@kernel.org> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Tue, 17 Oct 2006 07:09:57 +0000 (00:09 -0700)]
[PATCH] vmalloc(): don't pass __GFP_ZERO to slab
A recent change to the vmalloc() code accidentally resulted in us passing
__GFP_ZERO into the slab allocator. But we only wanted __GFP_ZERO for the
actual pages whcih are being vmalloc()ed, and passing __GFP_ZERO into slab is
not a rational thing to ask for.
Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David M. Grimes [Tue, 17 Oct 2006 07:09:45 +0000 (00:09 -0700)]
[PATCH] knfsd: add nfs-export support to tmpfs
We need to encode a decode the 'file' part of a handle. We simply use the
inode number and generation number to construct the filehandle.
The generation number is the time when the file was created. As inode numbers
cycle through the full 32 bits before being reused, there is no real chance of
the same inum being allocated to different files in the same second so this is
suitably unique. Using time-of-day rather than e.g. jiffies makes it less
likely that the same filehandle can be created after a reboot.
In order to be able to decode a filehandle we need to be able to lookup by
inum, which means that the inode needs to be added to the inode hash table
(tmpfs doesn't currently hash inodes as there is never a need to lookup by
inum). To avoid overhead when not exporting, we only hash an inode when it is
first exported. This requires a lock to ensure it isn't hashed twice.
This code is separate from the patch posted in June06 from Atal Shargorodsky
which provided the same functionality, but does borrow slightly from it.
Locking comment: Most filesystems that hash their inodes do so at the point
where the 'struct inode' is initialised, and that has suitable locking
(I_NEW). Here in shmem, we are hashing the inode later, the first time we
need an NFS file handle for it. We no longer have I_NEW to ensure only one
thread tries to add it to the hash table.
Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Tue, 17 Oct 2006 07:09:44 +0000 (00:09 -0700)]
[PATCH] remove carta_random32
This library function should be in obj-y and not in lib-y. But when we do
that it clashes unpleasantly with the assembly-language implementation in the
ia64 architecture.
Instead of trying to fix it all up, just remove the generic carta_random32 in
the expectation that the recently-made-generic random32() will suffice.
If/when perfmon is migrated to random32, ia64's private carta_random32
implementation can also be removed.
Make net_random() more widely available by calling it random32
akpm: hopefully this will permit the removal of carta_random32. That needs
confirmation from Stephane - this code looks somewhat more computationally
expensive, and has a different (ie: callee-stateful) interface.
[akpm@osdl.org: lots of build fixes, cleanups] Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thomas Gleixner [Tue, 17 Oct 2006 07:09:39 +0000 (00:09 -0700)]
[PATCH] posix-cpu-timers: prevent signal delivery starvation
The integer divisions in the timer accounting code can round the result
down to 0. Adding 0 is without effect and the signal delivery stops.
Clamp the division result to minimum 1 to avoid this.
Problem was reported by Seongbae Park <spark@google.com>, who provided
also an inital patch.
Roland sayeth:
I have had some more time to think about the problem, and to reproduce it
using Toyo's test case. For the record, if my understanding of the problem
is correct, this happens only in one very particular case. First, the
expiry time has to be so soon that in cputime_t units (usually 1s/HZ ticks)
it's < nthreads so the division yields zero. Second, it only affects each
thread that is so new that its CPU time accumulation is zero so now+0 is
still zero and ->it_*_expires winds up staying zero. For the VIRT and PROF
clocks when cputime_t is tick granularity (or the SCHED clock on
configurations where sched_clock's value only advances on clock ticks), this
is not hard to arrange with new threads starting up and blocking before they
accumulate a whole tick of CPU time. That's what happens in Toyo's test
case.
Note that in general it is fine for that division to round down to zero,
and set each thread's expiry time to its "now" time. The problem only
arises with thread's whose "now" value is still zero, so that now+0 winds up
0 and is interpreted as "not set" instead of ">= now". So it would be a
sufficient and more precise fix to just use max(ticks, 1) inside the loop
when setting each it_*_expires value.
But, it does no harm to round the division up to one and always advance
every thread's expiry time. If the thread didn't already fire timers for
the expiry time of "now", there is no expectation that it will do so before
the next tick anyway. So I followed Thomas's patch in lifting the max out
of the loops.
This patch also covers the reload cases, which are harder to write a test
for (and I didn't try). I've tested it with Toyo's case and it fixes that.
[toyoa@mvista.com: fix: min_t -> max_t] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Daniel Walker <dwalker@mvista.com> Cc: Toyo Abe <toyoa@mvista.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Seongbae Park <spark@google.com> Cc: Peter Mattis <pmattis@google.com> Cc: Rohit Seth <rohitseth@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Akinobu Mita [Tue, 17 Oct 2006 07:09:38 +0000 (00:09 -0700)]
[PATCH] md: fix /proc/mdstat refcounting
I have seen mdadm oops after successfully unloading md module.
This patch privents from unloading md module while
mdadm is polling /proc/mdstat.
Cc: Neil Brown <neilb@suse.de> Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Tue, 17 Oct 2006 07:09:36 +0000 (00:09 -0700)]
[PATCH] invalidate: remove_mapping() fix
If remove_mapping() failed to remove the page from its mapping, don't go and
mark it not uptodate! Makes kernel go dead.
(Actually, I don't think the ClearPageUptodate is needed there at all).
Says Nick Piggin:
"Right, it isn't needed because at this point the page is guaranteed
by remove_mapping to have no references (except us) and cannot pick
up any new ones because it is removed from pagecache.
We can delete it."
Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
john stultz [Tue, 17 Oct 2006 07:09:32 +0000 (00:09 -0700)]
[PATCH] i386 Time: Avoid PIT SMP lockups
Avoid possible PIT livelock issues seen on SMP systems (and reported by
Andi), by not allowing it as a clocksource on SMP boxes.
However, since the PIT may no longer be present, we have to properly handle
the cases where SMP systems have TSC skew and fall back from the TSC.
Since the PIT isn't there, it would "fall back" to the TSC again. So this
changes the jiffies rating to 1, and the TSC-bad rating value to 0.
Thus you will get the following behavior priority on i386 systems:
Pierre Ossman [Tue, 17 Oct 2006 07:09:30 +0000 (00:09 -0700)]
[PATCH] New MMC maintainer
I will be taking over after Russell King as the new maintainer of the
MMC layer.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Tue, 17 Oct 2006 07:09:28 +0000 (00:09 -0700)]
[PATCH] lockdep: increase max allowed recursion depth
In general, lockdep warnings are intended to be non-fatal, so I have put in
various practical limits on internal data structure failure modes. We haven't
had a /single/ lockdep-internal crash ever since lockdep went upstream [the
unwinder crashes are outside of lockdep], and that's largely due to the good
internal checks it does.
Recursion within the dependency graph is currently limited to 20, that's
probably not enough on some many-CPU boxes - this patch doubles it to 40. I
have written the lockdep functions to have as small stackframes as possible,
so 40 should be OK too. (The practical recursion limit should be somewhere
between 100 and 200 entries. If we hit that then I'll change the algorithm to
be iteration-based. Graph walking logic is so easy to program via recursion,
so i'd like to keep recursion as long as possible.)
Brent Casavant [Tue, 17 Oct 2006 07:09:25 +0000 (00:09 -0700)]
[PATCH] ioc4: Enable build on non-SN2
The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future. As such it is now a
misnomer for the IOC4 base device driver to live under drivers/sn, and
would complicate builds for non-SN2.
This patch moves the IOC4 base driver code from drivers/sn to drivers/misc,
and updates the associated Makefiles and Kconfig files to allow building on
non-SN2 configs. Due to the resulting change in link order, it is now
necessary to use late_initcall() for IOC4 subdriver initialization.
[akpm@osdl.org: __udivdi3 fix]
[akpm@osdl.org: fix default in Kconfig] Acked-by: Pat Gefre <pfg@sgi.com> Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Brent Casavant [Tue, 17 Oct 2006 07:09:24 +0000 (00:09 -0700)]
[PATCH] ioc4: Remove SN2 feature and config dependencies
The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on
Altix XE (x86_64) platforms in the near future. As such dependencies on
SN2-specific features and config dependencies need to be removed.
This patch updates the Kconfig files to remove the config dependency, and
updates the IOC4 bus speed detection routine to use universally available
time interfaces instead of mmtimer.
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
[Bluetooth] Use work queue to trigger URB submission
[Bluetooth] Add locking for bt_proto array manipulation
[Bluetooth] Check if DLC is still attached to the TTY
[Bluetooth] Fix reference count when connection lookup fails
[Bluetooth] Disconnect HID interrupt channel first
[Bluetooth] Support concurrent connect requests
[Bluetooth] Make use of virtual devices tree
[Bluetooth] Handle return values from driver core functions
[Bluetooth] Fix compat ioctl for BNEP, CMTP and HIDP
[IPV6] sit: Add missing MODULE_LICENSE
[IPV6]: Remove bogus WARN_ON in Proxy-NA handling.
[IPv6] rules: Use RT6_LOOKUP_F_HAS_SADDR and fix source based selectors
[XFRM]: Fix xfrm_state_num going negative.
[NET]: reduce sizeof(struct inet_peer), cleanup, change in peer_check_expire()
NetLabel: the CIPSOv4 passthrough mapping does not pass categories correctly
NetLabel: better error handling involving mls_export_cat()
NetLabel: only deref the CIPSOv4 standard map fields when using standard mapping
[BRIDGE]: flush forwarding table when device carrier off
[NETFILTER]: ctnetlink: Remove debugging messages
[NETFILTER]: Update MAINTAINERS entry
...
David Howells [Mon, 16 Oct 2006 13:10:49 +0000 (14:10 +0100)]
[PATCH] FRV: Use the correct preemption primitives in kmap_atomic() and co
Use inc/dec_preempt_count() rather than preempt_enable/disable() and manually
add in the compiler barriers that were provided by the latter. This makes FRV
consistent with other archs.
Furthermore, the compiler barrier effects are now there unconditionally - at
least as far as preemption is concerned - because we don't want the compiler
moving memory accesses out of the section of code in which the mapping is in
force - in effect the kmap_atomic() must imply a LOCK-class barrier and the
kunmap_atomic() must imply an UNLOCK-class barrier to the compiler.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It is known that 2 LSI Logic MegaRAID SATA RAID Controllers (150-4 and
150-6) don't support 64-bit DMA. Unfortunately currently this check is
wrong and driver sets 64-bit DMA mode for these devices.
Alan Cox [Mon, 16 Oct 2006 15:31:02 +0000 (16:31 +0100)]
[PATCH] ide: add sanity checking to ide taskfile ioctl
Without this the user can feed in bogus values and get very bogus
results. Security impact is minimal as this ioctl isn't available to
unpriviledged processes anyway.
Reported to the l/k list and found with an auditing tool.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-beck.git / log