staging: clean up checkpatch warnings in lustre

Silence checkpatch warning:

WARNING: type 'long long unsigned' should be specified in
[[un]signed] [short|int|long|long long] order

Signed-off-by: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u - check for skb alloc failure

It's possible for dev_alloc_skb() to fail. Propagate the error to the caller,
so it can clean up and drop the packet. The sender should end up retransmitting
the packet, hopefully at a time we're prepared to allocate skb's again.

Reported-By: Nicholas Krause <xerofoify@gmail.com>
Signed-Off-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: octeon-hcd: removed unwanted return from void

This is a patch to the octeon-hcd.c file that fixes
checkpatch.pl warning by removing return statement from
void functions.

Signed-off-by: Nitin Kuppelur <nitinkuppelur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove HalPhyRf_8188e.c

Move functions from HalPhyRf_8188e.c to phy.c .

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove HalPhyRf_8188e.h

Move macros and function declarations from HalPhyRf_8188e.h
to phy.h .

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: HalPhyRf_8188e.h :Remove unused function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: HalPhyRf_8188e.c: Remove unused functions

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_LCCalibrate_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_LCCalibrate_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_LCCalibrate_8188E()

Rename CamelCase local variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_IQCalibrate_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_SimularityCompare_8188E()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_PIModeSwitch()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_PathAStandBy()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_MACSettingCalibration()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_PathADDAOn()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_ReloadMACRegisters()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function reload_adda_reg()

Rename CamelCase local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_SaveMACRegisters()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_SaveADDARegisters()

Rename CamelCase local variables and function name.
Remove unnecessary debugging messages and local variables.
Declare it as a static function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function pathb_fill_iqk()

Rename CamelCase local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function patha_fill_iqk()

Rename CamelCase local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_PathB_IQK_8188E()

Rename CamelCase function name and local variables.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_PathA_IQK_8188E()

Rename CamelCase function name and local variables.
Remove unnecessary debugging messages and local variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_PathA_RxIQK()

Rename CamelCase function name and variables.
Remove unnecessary debugging messages.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework odm_TXPowerTrackingCallback_ThermalMeter_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename function odm_TxPwrTrackSetPwr88E()

Rename CamelCase function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function ODM_TxPwrTrackAdjust88E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename function ODM_GetRightChnlPlaceforIQK()

Rename CamelCase function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Remove redundant break/goto statements in hfa384x_usb.c

This patch removes redundant goto or break statements in hfa384x_usb.c as found by checkpatch.pl

Signed-off-by: Ilja Sidoroff <ilja.sidoroff@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8192u: remove typedef

remove a typedef that is not even really used.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: netlogic: fix checkpatch.pl "LINE_SPACING" issuses

Follow the checkpatch.pl "LINE_SPACING" indication:
1. Insert a blank line after function declaration.
2. Remove multiple blank lines.

Signed-off-by: SeeChen Ng <seechen81@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8723au: Fix '"(foo*)" should be "(foo *)"' errors

Fix checkpatch.pl '"(foo*)" should be "(foo *)"' errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8821ae: Fix '"(foo*)" should be "(foo *)"' errors

Fix checkpatch.pl '"(foo*)" should be "(foo *)"' errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: sort.c: fix coding style

Fix checkpatch.pl "Alignment should match open parenthesis".

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove rate_control_algorithm pid

rate control algorithm pid was removed from wireless tree

The device defaults to algorithm 'minstrel_ht'

There has been no problems using this algorithm.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device_free_info() warn: variable dereferenced before check

pDevice is never NULL when this function is called remove the check.

This fixes smatch warning
drivers/staging/vt6655/device_main.c:1023 device_free_info() warn: variable dereferenced
before check 'pDevice' (see line 1021)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: kbuild@01.org
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gs_fpgaboot: remove checks for CONFIG_B4860G100

There are two checks for CONFIG_B4860G100 in this driver. But there's no
Kconfig symbol B4860G100. These checks will always evaluate to false.
Remove them and the code they hide.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8821ae: Fix "space required before that '*'" errors

Fix checkpatch.pl "space required before that '*'" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8723au: Fix "space required before that '*'" errors

Fix checkpatch.pl "space required before that '*'" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192u: Fix "space required before that '*'" errors

Fix checkpatch.pl "space required before that '*'" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Removed unnecessary cast

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Blank lines add/remove

* Blank lines between a function call and its return status check were
  removed.
* Double blank lines were removed.
* Blank lines were added and removed as to silence checkpatch.pl --strict

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Fix indentations

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Trivial coding style fixes

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Reorganize line breaks for clarity

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Fix comments

Trivial comments removed, and one comment clarified

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Added curly brackets as required

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Clarified the stop condition for a loop

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Use the return value of wait_event_interruptible

Rather than checking the wait condition, the return value of
wait_event_interruptible() and wait_event_interruptible_timeout() is
used.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Fixes related to "rc" variable

"rc" is often used to hold the return value of a function call. This patch
removes unnecessary assignments to this variable, and makes a few related
execution flow improvements.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: EAGAIN status handling improvement

The -EAGAIN status is passed through an "rc" variable instead of a less
common flow.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Improved goto flow for error handling

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Improved error handling

xilly_scan_idt() now returns an error status code, rather than being a void
function and hint the status through an entry in a data structure.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Removed unnecessary error message

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Removed unnecessary warning message

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Non-interruptible mutex_lock() on release method

Responding to an interrupt while handling the "release" method can't end
well anyhow. In practical cases, this can force the user to wait up to
one second while flushing remaining data is attempted (a timeout on the flush
mechanism limits the time for flushing).

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Use SEEK_* predefined constants

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Use devm_kcalloc() for arrays

Replace devm_kzalloc where it applies.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: move analog input (*insn_read) function

For aesthetics, move the analog input (*insn_read) function so it
is not located in the middle of the async command support functions.
Also, rename it for consistency.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up some wordy comments

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: no need to reset ai FIFO after (*insn_read)

The analog input FIFO is reset at the start of every (*insn_read) and (*do_cmd)
operation. It's also reset for the analog input (*cancel).

There's no reason to reset the FIFO if an (*insn_read) times out or after
all the samples have been acquired.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_amcc_setup_dma()

Introduce a helper function to program the AMCC master write address and
transfer count registers to setup a DMA transaction.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_amcc_dma_ena()

Introduce a helper function to program the AMCC master control/status
register to enable/disable dma.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_amcc_int_ena()

Introduce a helper function to program the AMCC interrupt control/
status register to enable/disable interrupts.

Fix the analog input (*cancel). The analog input async command support
is the only interrupt generator. The (*cancel) should always disable
interrupts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename 'IntControlReg'

Rename this CamelCase member of the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename 'AdControlReg'

Rename this CamelCase member of the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename 'AdFunctionReg'

Rename this CamelCase member of the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: fix ai range/aref programming

Currently the analog input range and aref are set in setup_channel_list().
This works for the (*insn_read) but the (*do_cmd) has a problem.

In (*do_cmd) the ai control register is reset to 0 before the function works
out the bits needed to control the acquisition. This happens after the
setup_channel_list() call so the range is reset to bipolar and the aref to
single-ended.

Introduce a helper function, pci9118_ai_set_range_aref(), to handle the
programming of the range and aref bits. This function first clears the
cached value of the ai control register in the private data then sets the
appropriate bits. The (*insn_read) and (*do_cmd) can then set the other
bits needed to control the acquisition.

Then setup_channel_list() just needs to program the chanlist scan data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: ai (*insn_read) does not use interrupts

The analog input (*insn_read) in this driver is done as a software-triggered,
polled operation. The PCI9118_AI_CTRL_INT bit in the control register, which
is actually set in setup_channel_list(), should not be set.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: cleanup and simplify pci9118_reset()

Change the return type to void, this function always succeeds and the
callers never check the return value.

According to the The User Manual for the PCI-9118, the hardware does not
require any particular "reset" in order to function. Simplify the reset
so it justs gets the board info a known state with interrupts disabled.

There is no reason to initialize the private data members in this function.
They all default to '0' due to the kzalloc() of the private data and the
subdevice operations all initialize them as needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: move analog output (*insn_write) function

For aesthetics, move the analog output (*insn_write) function so it
is not located in the middle of the analog input functions. Also,
rename it for consistency.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use comedi_subdevice 'readback'

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

The board is "reset" prior to the subdevice init. Part of this reset
sets all the analog output channels to 0V. Move the initialization of
the 'readback' values after the 'readback' member has been allocated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: move digitial input (*insn_bits) function

For aesthetics, move the digital inputs (*insn_bits) function so it
is not located in the middle of the analog input functions. Also,
rename it for consistency.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: don't reset digital outputs

Currently this driver resets the digital output channels to a low state
when the driver is attached and detached.

Since the digital output state can be read, initialize the subdevice
state when the driver is attached and don't reset them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: move digitial output (*insn_bits) function

For aesthetics, move the digital outputs (*insn_bits) function so it
is not located in the middle of the analog input functions. Also,
rename it for consistency.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up the interrupt control/status bit defines

Rename the CamelCase defines used for the interrupt control/status register
bits and convert them to bit shifts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up the interrupt control/status register

The register at offset 0x38 is the "interrupt control" register when written
and the "interrupt status" register when read. Both registers use the same
bit defines.

For aesthetics, use a common define for this register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_ai_reset_fifo()

Introduce a helper function to reset the analog input FIFO. For
aesthetics, rename the register used to reset the FIFO.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up the ai config register bit defines

Rename the CamelCase defines used for the analog input config register
bits and convert them to bit shifts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_ADFUNC define

For aesthetics, rename this define used for the analog input function
config register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_SCANMOD define

For aesthetics, rename this define used for the analog input auto scan
mode register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_BURST define

For aesthetics, rename this define used for the analog input burst
number register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_GAIN define

For aesthetics, rename this define used for the analog input chanlist
programming register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_ai_start_conv()

Writing any value to the "software trigger" register generates a trigger
pulse to start an A/D conversion. Introduce a helper function to clarify
this. For aesthetics, rename the define used for the register.

According to the datasheet the extra delay is not needed after starting
the conversion. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: clarify the digital I/O register

The same register is used for both the digital inputs and outputs.
Reading the register returns the state of the 4 digtial input channels
and the 4 digital output channels. Writing to the register updates the
digital outputs.

Add some comments to clarify this and use a single define for the register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up the ai control register bit defines

Rename the CamelCase defines used for the analog input control register
bits and convert them to bit shifts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_ADCNTRL define

For aesthetics, rename this define used for the analog input control
register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up the ai status register bit defines

Rename the CamelCase defines used for the analog input status register
bits and convert them to bit shifts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename PCI9118_ADSTAT define

For aesthetics, rename this define used for the analog input status
register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog output register defines

Replace the current defines with a macro that calculates the correct
register offset based on the channel.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog input fifo register define

For aesthetics, rename the define used for the analog input fifo register
and tidy up its use in the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_timer_set_mode()

This driver uses 32-bit instructions to write the 8254 timers so we
can't use the helper functions provided by 8253.h.

To clarify the code introduce a helper function to set the timer mode.

Remove the unnecessary commented out timer mode programming.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_timer_write()

This driver uses 32-bit instructions to write the 8254 timers so we
can't use the helper functions provided by 8253.h.

To clarify the code introduce a helper function to write to the timers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: all registers are 32-bit

According to the PCI-9118 User's Manual, all registers are 32-bit. Fix a
couple of read/write operations that use 16-bit access.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog input subdevice init

For aesthetics, add some whitespace to the analog input subdevice init.
Tidy up the subdevice n_chan initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up analog output subdevice init

For aesthetics, add some whitespace to the analog output subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up digital input subdevice init

For aesthetics, add some whitespace to the digital input subdevice init.

Remove the SDF_GROUND and SDF_COMMON subdev_flags. These flags only apply
to analog subdevices.

Remove the 'len_chanlist' init, this subdevice member is only used with
subdevices that support async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up digital output subdevice init

For aesthetics, add some whitespace to the digital output subdevice init.

Remove the SDF_GROUND and SDF_COMMON subdev_flags. These flags only apply
to analog subdevices.

Remove the 'len_chanlist' init, this subdevice member is only used with
subdevices that support async commands.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: allocate private data in pci9118_common_attach()

The (*auto_attach) and legacy (*attach) both allocate the private data but
don't use it. For aesthetics, move the allocation into the common attach
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>