Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS fixes from Al Viro:
"statx followup fixes and a fix for stack-smashing on alpha"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
alpha: fix stack smashing in old_adjtimex(2)
statx: Include a mask for stx_attributes in struct statx
statx: Reserve the top bit of the mask for future struct expansion
xfs: report crtime and attribute flags to statx
ext4: Add statx support
statx: optimize copy of struct statx to userspace
statx: remove incorrect part of vfs_statx() comment
statx: reject unknown flags when using NULL path
Documentation/filesystems: fix documentation for ->getattr()
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here's a pull request for 4.11-rc, fixing a set of issues mostly
centered around the new scheduling framework. These have been brewing
for a while, but split up into what we absolutely need in 4.11, and
what we can defer until 4.12. These are well tested, on both single
queue and multiqueue setups, and with and without shared tags. They
fix several hangs that have happened in testing.
This is obviously larger than I would have preferred at this point in
time, but I don't think we can shave much off this and still get the
desired results.
In detail, this pull request contains:
- a set of five fixes for NVMe, mostly from Christoph and one from
Roland.
- a series from Bart, fixing issues with dm-mq and SCSI shared tags
and scheduling. Note that one of those patches commit messages may
read like an optimization, but it is in fact an important fix for
queue restarts in particular.
- a series from Omar, most importantly fixing a hang with multiple
hardware queues when we fail to get a driver tag. Another important
fix in there is for resizing hardware queues, which nbd does when
handling multiple sockets for one connection.
- fixing an imbalance in putting the ctx for hctx request allocations
from Minchan"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: Restart a single queue if tag sets are shared
dm rq: Avoid that request processing stalls sporadically
scsi: Avoid that SCSI queues get stuck
blk-mq: Introduce blk_mq_delay_run_hw_queue()
blk-mq: remap queues when adding/removing hardware queues
blk-mq-sched: fix crash in switch error path
blk-mq-sched: set up scheduler tags when bringing up new queues
blk-mq-sched: refactor scheduler initialization
blk-mq: use the right hctx when getting a driver tag fails
nvmet: fix byte swap in nvmet_parse_io_cmd
nvmet: fix byte swap in nvmet_execute_write_zeroes
nvmet: add missing byte swap in nvmet_get_smart_log
nvme: add missing byte swap in nvme_setup_discard
nvme: Correct NVMF enum values to match NVMe-oF rev 1.0
block: do not put mq context in blk_mq_alloc_request_hctx
Merge tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"This late fix for pin control is hopefully the last I send this cycle.
The problem was detected early in the v4.11 release cycle and there
has been some back and forth on how to solve it. Sadly the proper fix
arrives late, but at least not too late.
An issue was detected with pin control on the Freescale i.MX after the
refactorings for more general group and function handling.
We now have the proper fix for this"
* tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()
Merge tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.11:
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host
kernel crash triggered by a hostile guest, but only in
configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian
kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
Paul Mackerras"
* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
powerpc/mm: Add missing global TLB invalidate if cxl is active
powerpc/64: Fix flush_(d|i)cache_range() called from modules
powerpc: Don't try to fix up misaligned load-with-reservation instructions
powerpc: Disable HFSCR[TM] if TM is not supported
selftests/powerpc: Fix standalone powerpc build
Chris Salls [Sat, 8 Apr 2017 06:48:11 +0000 (23:48 -0700)]
mm/mempolicy.c: fix error handling in set_mempolicy and mbind.
In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.
Signed-off-by: Chris Salls <salls@cs.ucsb.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sparc fixes from David Miller:
"Several fixes here, mostly having to due with either build errors or
memory corruptions depending upon whether you have THP enabled or not"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: remove unused wp_works_ok macro
sparc32: Export vac_cache_size to fix build error
sparc64: Fix memory corruption when THP is enabled
sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
arch/sparc: Avoid DCTI Couples
sparc64: kern_addr_valid regression
sparc64: Add support for 2G hugepages
sparc64: Fix size check in huge_pte_alloc
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Fix a problem with GICv3 userspace save/restore
- Clarify GICv2 userspace save/restore ABI
- Be more careful in clearing GIC LRs
- Add missing synchronization primitive to our MMU handling code
PPC:
- Check for a NULL return from kzalloc
s390:
- Prevent translation exception errors on valid page tables for the
instruction-exection-protection support
x86:
- Fix Page-Modification Logging when running a nested guest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Check for kmalloc errors in ioctl
KVM: nVMX: initialize PML fields in vmcs02
KVM: nVMX: do not leak PML full vmexit to L1
KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABI
KVM: arm64: Ensure LRs are clear when they should be
kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
KVM: s390: remove change-recording override support
arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm
Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit
Pull audit cleanup from Paul Moore:
"A week later than I had hoped, but as promised, here is the audit
uninline-fix we talked about during the last audit pull request.
The patch is slightly different than what we originally discussed as
it made more sense to keep the audit_signal_info() function in
auditsc.c rather than move it and bunch of other related
variables/definitions into audit.c/audit.h.
At some point in the future I need to look at how the audit code is
organized across kernel/audit*, I suspect we could do things a bit
better, but it doesn't seem like a -rc release is a good place for
that ;)
Regardless, this patch passes our tests without problem and looks good
for v4.11"
* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
audit: move audit_signal_info() into kernel/auditsc.c
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: move pcp and lru-pcp draining into single wq
mailmap: update Yakir Yang email address
mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()
dax: fix radix tree insertion race
mm, thp: fix setting of defer+madvise thp defrag mode
ptrace: fix PTRACE_LISTEN race corrupting task->state
vmlinux.lds: add missing VMLINUX_SYMBOL macros
mm/page_alloc.c: fix print order in show_free_areas()
userfaultfd: report actual registered features in fdinfo
mm: fix page_vma_mapped_walk() for ksm pages
Michal Hocko [Fri, 7 Apr 2017 23:05:05 +0000 (16:05 -0700)]
mm: move pcp and lru-pcp draining into single wq
We currently have 2 specific WQ_RECLAIM workqueues in the mm code.
vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain
per cpu lru caches. This seems more than necessary because both can run
on a single WQ. Both do not block on locks requiring a memory
allocation nor perform any allocations themselves. We will save one
rescuer thread this way.
On the other hand drain_all_pages() queues work on the system wq which
doesn't have rescuer and so this depend on memory allocation (when all
workers are stuck allocating and new ones cannot be created).
Initially we thought this would be more of a theoretical problem but
Hugh Dickins has reported:
: 4.11-rc has been giving me hangs after hours of swapping load. At
: first they looked like memory leaks ("fork: Cannot allocate memory");
: but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
: before looking at /proc/meminfo one time, and the stat_refresh stuck
: in D state, waiting for completion of flush_work like many kworkers.
: kthreadd waiting for completion of flush_work in drain_all_pages().
This worker should be using WQ_RECLAIM as well in order to guarantee a
forward progress. We can reuse the same one as for lru draining and
vmstat.
Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Yang Li <pku.leo@gmail.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ross Zwisler [Fri, 7 Apr 2017 23:04:57 +0000 (16:04 -0700)]
dax: fix radix tree insertion race
While running generic/340 in my test setup I hit the following race. It
can happen with kernels that support FS DAX PMDs, so v4.10 thru
v4.11-rc5.
Thread 1 Thread 2
-------- --------
dax_iomap_pmd_fault()
grab_mapping_entry()
spin_lock_irq()
get_unlocked_mapping_entry()
'entry' is NULL, can't call lock_slot()
spin_unlock_irq()
radix_tree_preload()
dax_iomap_pmd_fault()
grab_mapping_entry()
spin_lock_irq()
get_unlocked_mapping_entry()
...
lock_slot()
spin_unlock_irq()
dax_pmd_insert_mapping()
<inserts a PMD mapping>
spin_lock_irq()
__radix_tree_insert() fails with -EEXIST
<fall back to 4k fault, and die horribly
when inserting a 4k entry where a PMD exists>
The issue is that we have to drop mapping->tree_lock while calling
radix_tree_preload(), but since we didn't have a radix tree entry to
lock (unlike in the pmd_downgrade case) we have no protection against
Thread 2 coming along and inserting a PMD at the same index. For 4k
entries we handled this with a special-case response to -EEXIST coming
from the __radix_tree_insert(), but this doesn't save us for PMDs
because the -EEXIST case can also mean that we collided with a 4k entry
in the radix tree at a different index, but one that is covered by our
PMD range.
So, correctly handle both the 4k and 2M collision cases by explicitly
re-checking the radix tree for an entry at our index once we reacquire
mapping->tree_lock.
This patch has made it through a clean xfstests run with the current
v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a
loop. It used to fail within the first 10 iterations.
Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> [4.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 7 Apr 2017 23:04:54 +0000 (16:04 -0700)]
mm, thp: fix setting of defer+madvise thp defrag mode
Setting thp defrag mode of "defer+madvise" actually sets "defer" in the
kernel due to the name similarity and the out-of-order way the string is
checked in defrag_store().
Check the string in the correct order so that
TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_OR_MADV_FLAG is set appropriately for
"defer+madvise".
Fixes: 21440d7eb904 ("mm, thp: add new defer+madvise defrag option") Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704051814420.137626@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED. This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.
Oleg said:
"The kernel can crash or this can lead to other hard-to-debug problems.
In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
contract. Obviusly it is very wrong to manipulate task->state if this
task is already running, or WAKING, or it sleeps again"
[akpm@linux-foundation.org: coding-style fixes] Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL") Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.com Signed-off-by: Ben Segall <bsegall@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When __{start,end}_ro_after_init is referenced from C code, we run into
the following build errors on blackfin:
kernel/extable.c:169: undefined reference to `__start_ro_after_init'
kernel/extable.c:169: undefined reference to `__end_ro_after_init'
The build error is due to the fact that blackfin is one of the few
arches that prepends an underscore '_' to all symbols defined in C.
Fix this by wrapping __{start,end}_ro_after_init in vmlinux.lds.h with
VMLINUX_SYMBOL(), which adds the necessary prefix for arches that have
HAVE_UNDERSCORE_SYMBOL_PREFIX.
Mike Rapoport [Fri, 7 Apr 2017 23:04:42 +0000 (16:04 -0700)]
userfaultfd: report actual registered features in fdinfo
fdinfo for userfault file descriptor reports UFFD_API_FEATURES. Up
until recently, the UFFD_API_FEATURES was defined as 0, therefore
corresponding field in fdinfo always contained zero. Now, with
introduction of several additional features, UFFD_API_FEATURES is not
longer 0 and it seems better to report actual features requested for the
userfaultfd object described by the fdinfo.
First, the applications that were using userfault will still see zero at
the features field in fdinfo. Next, reporting actual features rather
than available features, gives clear indication of what userfault
features are used by an application.
Link: http://lkml.kernel.org/r/1491140181-22121-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just as observed in commit 4b0ece6fa016 ("mm: migrate: fix
remove_migration_pte() for ksm pages"), you cannot use page->index
calculations on ksm pages.
page_vma_mapped_walk() is relying on __vma_address(), where a ksm page
can lead it off the end of the page table, and into whatever nonsense is
in the next page, ending as an oops inside check_pte()'s pte_page().
KSM tells page_vma_mapped_walk() exactly where to look for the page, it
does not need any page->index calculation: and that's so also for all
the normal and file and anon pages - just not for THPs and their
subpages. Get out early in most cases: instead of a PageKsm test, move
down the earlier not-THP-page test, as suggested by Kirill.
I'm also slightly worried that this loop can stray into other vmas, so
added a vm_end test to prevent surprises; though I have not imagined
anything worse than a very contrived case, in which a page mlocked in
the next vma might be reclaimed because it is not mlocked in this vma.
orangefs: move features validation to fix filesystem hang
Without this fix (and another to the userspace component itself
described later), the kernel will be unable to process any OrangeFS
requests after the userspace component is restarted (due to a crash or
at the administrator's behest).
The bug here is that inside orangefs_remount, the orangefs_request_mutex
is locked. When the userspace component restarts while the filesystem
is mounted, it sends a ORANGEFS_DEV_REMOUNT_ALL ioctl to the device,
which causes the kernel to send it a few requests aimed at synchronizing
the state between the two. While this is happening the
orangefs_request_mutex is locked to prevent any other requests going
through.
This is only half of the bugfix. The other half is in the userspace
component which outright ignores(!) requests made before it considers
the filesystem remounted, which is after the ioctl returns. Of course
the ioctl doesn't return until after the userspace component responds to
the request it ignores. The userspace component has been changed to
allow ORANGEFS_VFS_OP_FEATURES regardless of the mount status.
Mike Marshall says:
"I've tested this patch against the fixed userspace part. This patch is
real important, I hope it can make it into 4.11...
Here's what happens when the userspace daemon is restarted, without
the patch:
=============================================
[ INFO: possible recursive locking detected ]
[ 4.10.0-00007-ge98bdb3 #1 Not tainted ]
---------------------------------------------
pvfs2-client-co/29032 is trying to acquire lock:
(orangefs_request_mutex){+.+.+.}, at: service_operation+0x3c7/0x7b0 [orangefs]
but task is already holding lock:
(orangefs_request_mutex){+.+.+.}, at: dispatch_ioctl_command+0x1bf/0x330 [orangefs]
blk-mq: Restart a single queue if tag sets are shared
To improve scalability, if hardware queues are shared, restart
a single hardware queue in round-robin fashion. Rename
blk_mq_sched_restart_queues() to reflect the new semantics.
Remove blk_mq_sched_mark_restart_queue() because this function
has no callers. Remove flag QUEUE_FLAG_RESTART because this
patch removes the code that uses this flag.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
dm rq: Avoid that request processing stalls sporadically
While running the srp-test software I noticed that request
processing stalls sporadically at the beginning of a test, namely
when mkfs is run against a dm-mpath device. Every time when that
happened the following command was sufficient to resume request
processing:
echo run >/sys/kernel/debug/block/dm-0/state
This patch avoids that such request processing stalls occur. The
test I ran is as follows:
while srp-test/run_tests -d -r 30 -t 02-mq; do :; done
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Jens Axboe <axboe@fb.com>
If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block
driver that implements that function is responsible for rerunning the
hardware queue once requests can be queued again successfully.
commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped
queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq()
for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions
that are intended to rerun a busy queue such that these examine all
hardware queues instead of only stopped queues.
Since no other functions than scsi_internal_device_block() and
scsi_internal_device_unblock() should ever stop or restart a SCSI
queue, change the blk_mq_delay_queue() call into a
blk_mq_delay_run_hw_queue() call.
Fixes: commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped queues") Fixes: commit 7e79dadce222 ("blk-mq: stop hardware queue in blk_mq_delay_queue()") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Long Li <longli@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Introduce a function that runs a hardware queue unconditionally
after a delay. Note: there is already a function that stops and
restarts a hardware queue after a delay, namely blk_mq_delay_queue().
This function will be used in the next patch in this series.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Long Li <longli@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a regression fix for the signal raised when userspace makes
an unsupported unaligned access and a revert of the contiguous
(hugepte) support for hugetlb, which has once again been found to be
broken. One day, maybe, we'll get it right.
Summary:
- restore previous SIGBUS behaviour for unhandled unaligned user
accesses
- revert broken support for the contiguous bit in hugetlb (again...)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "Revert "arm64: hugetlb: partial revert of 66b3923a1a0f""
arm64: mm: unaligned access by user-land should be received as SIGBUS
Merge tag 'metag-for-v4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull metag usercopy fixes from James Hogan:
"Metag usercopy fault handling fixes
These patches fix a bunch of longstanding (some over a decade old)
metag user copy fault handling bugs. Thanks go to Al Viro for spotting
some of the questionable code in the first place"
* tag 'metag-for-v4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag/usercopy: Add missing fixups
metag/usercopy: Fix src fixup in from user rapf loops
metag/usercopy: Set flags before ADDZ
metag/usercopy: Zero rest of buffer from copy_from_user
metag/usercopy: Add early abort to copy_to_user
metag/usercopy: Fix alignment error checking
metag/usercopy: Drop unused macros
Merge tag 'acpi-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes a core device enumeration code change made in 4.10, in
order to address a reported issue, that went too far.
Specifics:
- Refine the check for the existence of _HID in find_child_checks()
so that it doesn't trigger for device objects with device IDs made
up by the kernel (Rafael Wysocki)"
* tag 'acpi-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Prefer devices without _HID for _ADR matching
sysctl: don't print negative flag for proc_douintvec
I saw some very confusing sysctl output on my system:
# cat /proc/sys/net/core/xfrm_aevent_rseqth
-2
# cat /proc/sys/net/core/xfrm_aevent_etime
-10
# cat /proc/sys/net/ipv4/tcp_notsent_lowat
-4294967295
Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.
Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.
Commit e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32
fields") introduced the proc_douintvec helper function, but it forgot to
add the related sanity check when doing register_sysctl_table. So add
it now.
blk-mq: remap queues when adding/removing hardware queues
blk_mq_update_nr_hw_queues() used to remap hardware queues, which is the
behavior that drivers expect. However, commit 4e68a011428a changed
blk_mq_queue_reinit() to not remap queues for the case of CPU
hotplugging, inadvertently making blk_mq_update_nr_hw_queues() not remap
queues as well. This breaks, for example, NBD's multi-connection mode,
leaving the added hardware queues unused. Fix it by making
blk_mq_update_nr_hw_queues() explicitly remap the queues.
Fixes: 4e68a011428a ("blk-mq: don't redistribute hardware queues on a CPU hotplug event") Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall
back to the original scheduler. However, at this point, we've already
torn down the original scheduler's tags, so this causes a crash. Doing
the fallback like the legacy elevator path is much harder for mq, so fix
it by just falling back to none, instead.
blk-mq-sched: set up scheduler tags when bringing up new queues
If a new hardware queue is added at runtime, we don't allocate scheduler
tags for it, leading to a crash. This hooks up the scheduler framework
to blk_mq_{init,exit}_hctx() to make sure everything gets properly
initialized/freed.
blk-mq: use the right hctx when getting a driver tag fails
While dispatching requests, if we fail to get a driver tag, we mark the
hardware queue as waiting for a tag and put the requests on a
hctx->dispatch list to be run later when a driver tag is freed. However,
blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware
queues if using a single-queue scheduler with a multiqueue device. If
blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we
are processing. This means we end up using the hardware queue of the
previous request, which may or may not be the same as that of the
current request. If it isn't, the wrong hardware queue will end up
waiting for a tag, and the requests will be on the wrong dispatch list,
leading to a hang.
The fix is twofold:
1. Make sure we save which hardware queue we were trying to get a
request for in blk_mq_get_driver_tag() regardless of whether it
succeeds or not.
2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a
blk_mq_hw_queue to make it clear that it must handle multiple
hardware queues, since I've already messed this up on a couple of
occasions.
This didn't appear in testing with nvme and mq-deadline because nvme has
more driver tags than the default number of scheduler tags. However,
with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd.
Will Deacon [Fri, 31 Mar 2017 11:23:43 +0000 (12:23 +0100)]
Revert "Revert "arm64: hugetlb: partial revert of 66b3923a1a0f""
The use of the contiguous bit by our hugetlb implementation violates
the break-before-make requirements of the architecture and can lead to
silent data corruption or TLB conflict aborts. Once again, disable these
hugetlb sizes whilst it gets worked out.
It used to be sufficient just to call pagefault_disable(), because that
also disabled preemption. But the two were decoupled in commit 8222dbe21e79
("sched/preempt, mm/fault: Decouple preemption from the page fault
logic") in mid 2015.
So add the missing preempt_disable/enable(). We should also call
disable_kernel_fp(), although it does nothing by default, there is a
debug switch to make it active and all enables should be paired with
disables.
Tony Lindgren [Thu, 30 Mar 2017 16:16:39 +0000 (09:16 -0700)]
pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()
Recent pinctrl changes to allow dynamic allocation of pins exposed one
more issue with the pinctrl pins claimed early by the controller itself.
This caused a regression for IMX6 pinctrl hogs.
Before enabling the pin controller driver we need to wait until it has
been properly initialized, then claim the hogs, and only then enable it.
To fix the regression, split the code into pinctrl_claim_hogs() and
pinctrl_enable(). And then let's require that pinctrl_enable() is always
called by the pin controller driver when ready after calling
pinctrl_register_and_init().
Depends-on: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed
work for hogs") Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs") Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for
managing groups") Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Nishanth Menon <nm@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'xfs-4.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS fixes from Darrick Wong:
"Here are three more fixes for 4.11.
The first one reworks the inline directory verifier to check the
working copy of the directory metadata and to avoid triggering a
periodic crash in xfs/348. The second patch fixes a regression in hole
punching at EOF that corrupts files; and the third patch closes a
kernel memory disclosure bug.
Summary:
- rework the inline directory verifier to avoid crashes on disk
corruption
- don't change file size when punching holes w/ KEEP_SIZE
- close a kernel memory exposure bug"
* tag 'xfs-4.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix kernel memory exposure problems
xfs: Honor FALLOC_FL_KEEP_SIZE when punching ends of files
xfs: rework the inline directory verifiers
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Lantiq:
- Fix adding xbar resoures causing a panic
Loongson3:
- Some Loongson 3A don't identify themselves as having an FTLB so
hardwire that knowledge into CPU probing.
- Handle Loongson 3 TLB peculiarities in the fast path of the RDHWR
emulation.
- Fix invalid FTLB entries with huge page on VTLB+FTLB platforms
- Add missing calculation of S-cache and V-cache cache-way size
Ralink:
- Fix typos in rt3883 pinctrl data
Generic:
- Force o32 fp64 support on 32bit MIPS64r6 kernels
- Yet another build fix after the linux/sched.h changes
- Wire up statx system call
- Fix stack unwinding after introduction of IRQ stack
- Fix spinlock code to build even for microMIPS with recent binutils
SMP-CPS:
- Fix retrieval of VPE mask on big endian CPUs"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: IRQ Stack: Unwind IRQ stack onto task stack
MIPS: c-r4k: Fix Loongson-3's vcache/scache waysize calculation
MIPS: Flush wrong invalid FTLB entry for huge page
MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3
MIPS: Add MIPS_CPU_FTLB for Loongson-3A R2
MIPS: Lantiq: fix missing xbar kernel panic
MIPS: smp-cps: Fix retrieval of VPE mask on big endian CPUs
MIPS: Wire up statx system call
MIPS: Include asm/ptrace.h now linux/sched.h doesn't
MIPS: ralink: Fix typos in rt3883 pinctrl
MIPS: End spinlocks with .insn
MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels
Merge tag 'trace-v4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Wei Yongjun fixed a long standing bug in the ring buffer startup test.
If for some unknown reason, the kthread that is created fails to be
created, the return from kthread_create() is an PTR_ERR and not a
NULL. The test incorrectly checks for NULL instead of an error"
* tag 'trace-v4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Fix return value check in test_ringbuffer()
It's unused for ages, used to be required for ksyms.c back in the v1.1
times.
Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: cb8864559631 ("infiniband: Fix alignment of mmap cookies ...") Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Nitin Gupta [Fri, 31 Mar 2017 22:48:53 +0000 (15:48 -0700)]
sparc64: Fix memory corruption when THP is enabled
The memory corruption was happening due to incorrect
TLB/TSB flushing of hugepages.
Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Hromatka [Fri, 31 Mar 2017 22:31:42 +0000 (16:31 -0600)]
sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
This commit moves sparc64's prototype of pmd_write() outside
of the CONFIG_TRANSPARENT_HUGEPAGE ifdef.
In 2013, commit a7b9403f0e6d ("sparc64: Encode huge PMDs using PTE
encoding.") exposed a path where pmd_write() could be called without
CONFIG_TRANSPARENT_HUGEPAGE defined. This can result in the panic below.
The diff is awkward to read, but the changes are straightforward.
pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE.
Also, __HAVE_ARCH_PMD_WRITE was defined.
Dan Carpenter [Fri, 17 Mar 2017 20:41:14 +0000 (23:41 +0300)]
KVM: PPC: Book3S HV: Check for kmalloc errors in ioctl
kzalloc() won't actually fail because sizeof(*resize) is small, but
static checkers complain.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
1) Reject invalid updates to netfilter expectation policies, from Pablo
Neira Ayuso.
2) Fix memory leak in nfnl_cthelper, from Jeffy Chen.
3) Don't do stupid things if we get a neigh_probe() on a neigh entry
whose ops lack a solicit method. From Eric Dumazet.
4) Don't transmit packets in r8152 driver when the carrier is off, from
Hayes Wang.
5) Fix ipv6 packet type detection in aquantia driver, from Pavel
Belous.
6) Don't write uninitialized data into hw registers in bna driver, from
Arnd Bergmann.
7) Fix locking in ping_unhash(), from Eric Dumazet.
8) Make BPF verifier range checks able to understand certain sequences
emitted by LLVM, from Alexei Starovoitov.
9) Fix use after free in ipconfig, from Mark Rutland.
10) Fix refcount leak on force commit in openvswitch, from Jarno
Rajahalme.
11) Fix various overflow checks in AF_PACKET, from Andrey Konovalov.
12) Fix endianness bug in be2net driver, from Suresh Reddy.
13) Don't forget to wake TX queues when processing a timeout, from
Grygorii Strashko.
14) ARP header on-stack storage is wrong in flow dissector, from Simon
Horman.
15) Lost retransmit and reordering SNMP stats in TCP can be
underreported. From Yuchung Cheng.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits)
nfp: fix potential use after free on xdp prog
tcp: fix reordering SNMP under-counting
tcp: fix lost retransmit SNMP under-counting
sctp: get sock from transport in sctp_transport_update_pmtu
net: ethernet: ti: cpsw: fix race condition during open()
l2tp: fix PPP pseudo-wire auto-loading
bnx2x: fix spelling mistake in macros HW_INTERRUT_ASSERT_SET_*
l2tp: take reference on sessions being dumped
tcp: minimize false-positives on TCP/GRO check
sctp: check for dst and pathmtu update in sctp_packet_config
flow dissector: correct size of storage for ARP
net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout
l2tp: take a reference on sessions used in genetlink handlers
l2tp: hold session while sending creation notifications
l2tp: fix duplicate session creation
l2tp: ensure session can't get removed during pppol2tp_session_ioctl()
l2tp: fix race in l2tp_recv_common()
sctp: use right in and out stream cnt
bpf: add various verifier test cases for self-tests
bpf, verifier: fix rejection of unaligned access checks for map_value_adj
...
Jakub Kicinski [Tue, 4 Apr 2017 22:56:55 +0000 (15:56 -0700)]
nfp: fix potential use after free on xdp prog
We should unregister the net_device first, before we give back
our reference on xdp_prog. Otherwise xdp_prog may be freed
before .ndo_stop() disabled the datapath. Found by code inspection.
Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the reordering SNMP counters only increase if a connection
sees a higher degree then it has previously seen. It ignores if the
reordering degree is not greater than the default system threshold.
This significantly under-counts the number of reordering events
and falsely convey that reordering is rare on the network.
This patch properly and faithfully records the number of reordering
events detected by the TCP stack, just like the comment says "this
exciting event is worth to be remembered". Note that even so TCP
still under-estimate the actual reordering events because TCP
requires TS options or certain packet sequences to detect reordering
(i.e. ACKing never-retransmitted sequence in recovery or disordered
state).
Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The lost retransmit SNMP stat is under-counting retransmission
that uses segment offloading. This patch fixes that so all
retransmission related SNMP counters are consistent.
Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- hand-off primary maintainership of Kbuild
- fix build warnings
- fix build error when GCOV is enabled with old compiler
- fix HAVE_ASM_GOTO check when GCC plugin is enabled
* tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gconfig: remove misleading parentheses around a condition
jump label: fix passing kbuild_cflags when checking for asm goto support
Kbuild: use cc-disable-warning consistently for maybe-uninitialized
kbuild: external module build warnings when KBUILD_OUTPUT set and W=1
MAINTAINERS: add Masahiro Yamada as a Kbuild maintainer
Merge tag 'kvm-arm-for-v4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
From: Christoffer Dall <cdall@linaro.org>
KVM/ARM Fixes for v4.11-rc6
Fixes include:
- Fix a problem with GICv3 userspace save/restore
- Clarify GICv2 userspace save/restore ABI
- Be more careful in clearing GIC LRs
- Add missing synchronization primitive to our MMU handling code
James Hogan [Tue, 4 Apr 2017 07:51:34 +0000 (08:51 +0100)]
metag/usercopy: Add missing fixups
The rapf copy loops in the Meta usercopy code is missing some extable
entries for HTP cores with unaligned access checking enabled, where
faults occur on the instruction immediately after the faulting access.
Add the fixup labels and extable entries for these cases so that corner
case user copy failures don't cause kernel crashes.
James Hogan [Mon, 3 Apr 2017 16:41:40 +0000 (17:41 +0100)]
metag/usercopy: Fix src fixup in from user rapf loops
The fixup code to rewind the source pointer in
__asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by
a single unit (4 or 8 bytes), however this is insufficient if the fault
didn't occur on the first load in the loop, as the source pointer will
have been incremented but nothing will have been stored until all 4
register [pairs] are loaded.
Read the LSM_STEP field of TXSTATUS (which is already loaded into a
register), a bit like the copy_to_user versions, to determine how many
iterations of MGET[DL] have taken place, all of which need rewinding.
James Hogan [Tue, 4 Apr 2017 10:43:26 +0000 (11:43 +0100)]
metag/usercopy: Set flags before ADDZ
The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP
to decide how far to rewind the source pointer. There is a special case
for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0
even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ
which is conditional upon the Z condition flag, but the AND instruction
which masked the TXStatus.LSM_STEP field didn't set the condition flags
based on the result.
Fix that now by using ANDS which does set the flags, and also marking
the condition codes as clobbered by the inline assembly.
James Hogan [Fri, 31 Mar 2017 10:14:02 +0000 (11:14 +0100)]
metag/usercopy: Zero rest of buffer from copy_from_user
Currently we try to zero the destination for a failed read from userland
in fixup code in the usercopy.c macros. The rest of the destination
buffer is then zeroed from __copy_user_zeroing(), which is used for both
copy_from_user() and __copy_from_user().
Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0
before the fixup code entry labels, and __copy_from_user() shouldn't even
be zeroing the rest of the buffer.
Move the zeroing out into copy_from_user() and rename
__copy_user_zeroing() to raw_copy_from_user() since it no longer does
any zeroing. This also conveniently matches the name needed for
RAW_COPY_USER support in a later patch.
Fixes: 373cd784d0fc ("metag: Memory handling") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org
Xin Long [Tue, 4 Apr 2017 05:39:55 +0000 (13:39 +0800)]
sctp: get sock from transport in sctp_transport_update_pmtu
This patch is almost to revert commit 02f3d4ce9e81 ("sctp: Adjust PMTU
updates to accomodate route invalidation."). As t->asoc can't be NULL
in sctp_transport_update_pmtu, it could get sk from asoc, and no need
to pass sk into that function.
It is also to remove some duplicated codes from that function.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
James Hogan [Fri, 31 Mar 2017 12:35:01 +0000 (13:35 +0100)]
metag/usercopy: Add early abort to copy_to_user
When copying to userland on Meta, if any faults are encountered
immediately abort the copy instead of continuing on and repeatedly
faulting, and worse potentially copying further bytes successfully to
subsequent valid pages.
Fixes: 373cd784d0fc ("metag: Memory handling") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org
James Hogan [Fri, 31 Mar 2017 10:23:18 +0000 (11:23 +0100)]
metag/usercopy: Fix alignment error checking
Fix the error checking of the alignment adjustment code in
raw_copy_from_user(), which mistakenly considers it safe to skip the
error check when aligning the source buffer on a 2 or 4 byte boundary.
If the destination buffer was unaligned it may have started to copy
using byte or word accesses, which could well be at the start of a new
(valid) source page. This would result in it appearing to have copied 1
or 2 bytes at the end of the first (invalid) page rather than none at
all.
James Hogan [Fri, 31 Mar 2017 09:37:44 +0000 (10:37 +0100)]
metag/usercopy: Drop unused macros
Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger
copies between 5 and 16 bytes which are completely unused. Before fixing
zeroing lets drop these macros so there is less to fix.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org
Wei Yongjun [Fri, 17 Jun 2016 17:33:59 +0000 (17:33 +0000)]
ring-buffer: Fix return value check in test_ringbuffer()
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Vic Yang [Fri, 24 Mar 2017 17:44:01 +0000 (18:44 +0100)]
mfd: cros-ec: Fix host command buffer size
For SPI, we can get up to 32 additional bytes for response preamble.
The current overhead (2 bytes) may cause problems when we try to receive
a big response. Update it to 32 bytes.
Without this fix we could see a kernel BUG when we receive a big response
from the Chrome EC when is connected via SPI.
Signed-off-by: Vic Yang <victoryang@google.com> Tested-by: Enric Balletbo i Serra <enric.balletbo.collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Frederic Barrat [Wed, 29 Mar 2017 17:19:42 +0000 (19:19 +0200)]
powerpc/mm: Add missing global TLB invalidate if cxl is active
Commit 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl") converted local
TLB invalidates to global if the cxl driver is active. This is necessary
because the CAPP snoops invalidations to forward them to the PSL on the
cxl adapter. However one path was forgotten. native_flush_hash_range()
still does local TLB invalidates, as found out the hard way recently.
This patch fixes it by following the same logic as previously: if the
cxl driver is active, the local TLB invalidates are 'upgraded' to
global.
powerpc/64: Fix flush_(d|i)cache_range() called from modules
When the kernel is compiled to use 64bit ABIv2 the _GLOBAL() macro does
not include a global entry point. A function's global entry point is
used when the function is called from a different TOC context and in the
kernel this typically means a call from a module into the vmlinux (or
vice-versa).
There are a few exported asm functions declared with _GLOBAL() and
calling them from a module will likely crash the kernel since any TOC
relative load will yield garbage.
flush_icache_range() and flush_dcache_range() are both exported to
modules, and use the TOC, so must use _GLOBAL_TOC().
Fixes: 721aeaa9fdf3 ("powerpc: Build little endian ppc64 kernel with ABIv2") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull late GPIO fixes from Linus Walleij:
"Some late coming ACPI fixes for GPIO.
We're dealing with ACPI issues here. The first is related to wake IRQs
on Bay Trail/Cherry Trail CPUs which are common in laptops. The second
is about proper probe deferral when reading _CRS properties.
For my untrained eye it seems there was some quarrel between the BIOS
and the kernel about who is supposed to deal with wakeups from GPIO
lines"
* tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set
Sekhar Nori [Mon, 3 Apr 2017 12:04:28 +0000 (17:34 +0530)]
net: ethernet: ti: cpsw: fix race condition during open()
TI's cpsw driver handles both OF and non-OF case for phy
connect. Unfortunately of_phy_connect() returns NULL on
error while phy_connect() returns ERR_PTR().
To handle this, cpsw_slave_open() overrides the return value
from phy_connect() to make it NULL or error.
This leaves a small window, where cpsw_adjust_link() may be
invoked for a slave while slave->phy pointer is temporarily
set to -ENODEV (or some other error) before it is finally set
to NULL.
_cpsw_adjust_link() only handles the NULL case, and an oops
results when ERR_PTR() is seen by it.
Note that cpsw_adjust_link() checks PHY status for each
slave whenever it is invoked. It can so happen that even
though phy_connect() for a given slave returns error,
_cpsw_adjust_link() is still called for that slave because
the link status of another slave changed.
Fix this by using a temporary pointer to store return value
of {of_}phy_connect() and do a one-time write to slave->phy.
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is just mostly stuff that missed rc5, from vmwgfx and msm
drivers"
* tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
drm/vmwgfx: Remove getparam error message
drm/ttm: Avoid calling drm_ht_remove from atomic context
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
drm/vmwgfx: Type-check lookups of fence objects
Fixes: f1f39f911027 ("l2tp: auto load type modules") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 3 Apr 2017 10:19:10 +0000 (11:19 +0100)]
bnx2x: fix spelling mistake in macros HW_INTERRUT_ASSERT_SET_*
Trival fix, rename HW_INTERRUT_ASSERT_SET_* to HW_INTERRUPT_ASSERT_SET_*
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Take a reference on the sessions returned by l2tp_session_find_nth()
(and rename it l2tp_session_get_nth() to reflect this change), so that
caller is assured that the session isn't going to disappear while
processing it.
For procfs and debugfs handlers, the session is held in the .start()
callback and dropped in .show(). Given that pppol2tp_seq_session_show()
dereferences the associated PPPoL2TP socket and that
l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to
call the session's .ref() callback to prevent the socket from going
away from under us.
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Fixes: 0ad6614048cf ("l2tp: Add debugfs files for dumping l2tp debug info") Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
L2 was running with uninitialized PML fields which led to incomplete
dirty bitmap logging. This manifested as all kinds of subtle erratic
behavior of the nested guest.
Fixes: 843e4330573c ("KVM: VMX: Add PML support in VMX") Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Jan Beulich [Tue, 4 Apr 2017 12:27:22 +0000 (06:27 -0600)]
xenbus: remove transaction holder from list before freeing
After allocation the item is being placed on the list right away.
Consequently it needs to be taken off the list before freeing in the
case xenbus_dev_request_and_reply() failed, as in that case the
callback (xenbus_dev_queue_reply()) is not being called (and if it
was called, it should do both).
Fixes: 5584ea250ae44f929feb4c7bd3877d1c5edbf813 Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fix a crash from dereferencing a NULL dw_pcie_ops pointer. For example,
on ARTPEC-6:
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = c0204000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-next-20170321 #1
Hardware name: Axis ARTPEC-6 Platform
task: db098000 task.stack: db096000
PC is at dw_pcie_writel_dbi+0x2c/0xd0
Prior to 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into
host-only and core structures"), every driver had a struct pcie_host_ops
with function pointers, typically used as:
if (pp->ops->readl_rc)
return pp->ops->readl_rc(...);
442ec4c04d12 split struct pcie_host_ops into two pieces: struct
dw_pcie_host_ops and struct dw_pcie_ops, so the above became:
if (pci->ops->readl_dbi)
return pci->ops->readl_dbi(...);
But pcie-artpec6.c and pcie-designware-plat.c don't need the dw_pcie_ops
pointers and didn't supply a pci->ops struct, which leads to NULL pointer
dereferences.
Supply an empty struct dw_pcie_ops to avoid the NULL pointer dereferences.
[bhelgaas: changelog] Fixes: 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Joao Pinto <jpinto@synopsys.com>
Paul Mackerras [Tue, 4 Apr 2017 04:56:05 +0000 (14:56 +1000)]
powerpc: Don't try to fix up misaligned load-with-reservation instructions
In the past, there was only one load-with-reservation instruction,
lwarx, and if a program attempted a lwarx on a misaligned address, it
would take an alignment interrupt and the kernel handler would emulate
it as though it was lwzx, which was not really correct, but benign since
it is loading the right amount of data, and the lwarx should be paired
with a stwcx. to the same address, which would also cause an alignment
interrupt which would result in a SIGBUS being delivered to the process.
We now have 5 different sizes of load-with-reservation instruction. Of
those, lharx and ldarx cause an immediate SIGBUS by luck since their
entries in aligninfo[] overlap instructions which were not fixed up, but
lqarx overlaps with lhz and will be emulated as such. lbarx can never
generate an alignment interrupt since it only operates on 1 byte.
To straighten this out and fix the lqarx case, this adds code to detect
the l[hwdq]arx instructions and return without fixing them up, resulting
in a SIGBUS being delivered to the process.
Cc: stable@vger.kernel.org Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a fix that prevents translation exception errors
on valid page tables for the instruction-exection-protection
support. This feature was added during the 4.11 merge window.
We have to remove an old check that would trigger if the
change-recording override is not available (e.g. edat1 disabled
via cpu model).
Christoffer Dall [Tue, 21 Mar 2017 21:05:22 +0000 (22:05 +0100)]
KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABI
As an oversight, for GICv2, we accidentally export the GICC_PMR register
in the format of the GICH_VMCR.VMPriMask field in the lower 5 bits of a
word, meaning that userspace must always use the lower 5 bits to
communicate with the KVM device and must shift the value left by 3
places to obtain the actual priority mask level.
Since GICv3 supports the full 8 bits of priority masking in the ICH_VMCR,
we have to fix the value we export when emulating a GICv2 on top of a
hardware GICv3 and exporting the emulated GICv2 state to userspace.
Take the chance to clarify this aspect of the ABI.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
Christoffer Dall [Sat, 18 Mar 2017 12:56:56 +0000 (13:56 +0100)]
KVM: arm64: Ensure LRs are clear when they should be
We currently have some code to clear the list registers on GICv3, but we
never call this code, because the caller got nuked when removing the old
vgic. We also used to have a similar GICv2 part, but that got lost in
the process too.
Let's reintroduce the logic for GICv2 and call the logic when we
initialize the use of hypervisors on the CPU, for example when first
loading KVM or when exiting a low power state.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
In kvm_free_stage2_pgd() we don't hold the kvm->mmu_lock while calling
unmap_stage2_range() on the entire memory range for the guest. This could
cause problems with other callers (e.g, munmap on a memslot) trying to
unmap a range. And since we have to unmap the entire Guest memory range
holding a spinlock, make sure we yield the lock if necessary, after we
unmap each PUD range.
Fixes: commit d5d8184d35c9 ("KVM: ARM: Memory virtualization setup") Cc: stable@vger.kernel.org # v3.10+ Cc: Paolo Bonzini <pbonzin@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ Avoid vCPU starvation and lockup detector warnings ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
Victor Kamensky [Tue, 4 Apr 2017 05:51:01 +0000 (22:51 -0700)]
arm64: mm: unaligned access by user-land should be received as SIGBUS
After 52d7523 (arm64: mm: allow the kernel to handle alignment faults on
user accesses) commit user-land accesses that produce unaligned exceptions
like in case of aarch32 ldm/stm/ldrd/strd instructions operating on
unaligned memory received by user-land as SIGSEGV. It is wrong, it should
be reported as SIGBUS as it was before 52d7523 commit.
Changed do_bad_area function to take signal and code parameters out of esr
value using fault_info table, so in case of do_alignment_fault fault
user-land will receive SIGBUS. Wrapped access to fault_info table into
esr_to_fault_info function.
Cc: <stable@vger.kernel.org> Fixes: 52d7523 (arm64: mm: allow the kernel to handle alignment faults on user accesses) Signed-off-by: Victor Kamensky <kamensky@cisco.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Markus Trippelsdorf reported that after commit dcb17d22e1c2 ("tcp: warn
on bogus MSS and try to amend it") the kernel started logging the
warning for a NIC driver that doesn't even support GRO.
It was diagnosed that it was possibly caused on connections that were
using TCP Timestamps but some packets lacked the Timestamps option. As
we reduce rcv_mss when timestamps are used, the lack of them would cause
the packets to be bigger than expected, although this is a valid case.
As this warning is more as a hint, getting a clean-cut on the
threshold is probably not worth the execution time spent on it. This
patch thus alleviates the false-positives with 2 quick checks: by
accounting for the entire TCP option space and also checking against the
interface MTU if it's available.
These changes, specially the MTU one, might mask some real positives,
though if they are really happening, it's possible that sooner or later
it will be triggered anyway.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- make __pa work with uncached KSEG addresses, it fixes DMA memory
mmapping and DMA debug
- fix torn stack dump output
- wire up statx syscall
* tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: wire up statx system call
xtensa: fix stack dump output
xtensa: make __pa work with uncached KSEG addresses
Dave Airlie [Tue, 4 Apr 2017 00:13:40 +0000 (10:13 +1000)]
Merge branch 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux into drm-fixes
misc msm fixes.
* 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
Xin Long [Sat, 1 Apr 2017 09:15:59 +0000 (17:15 +0800)]
sctp: check for dst and pathmtu update in sctp_packet_config
This patch is to move sctp_transport_dst_check into sctp_packet_config
from sctp_packet_transmit and add pathmtu check in sctp_packet_config.
With this fix, sctp can update dst or pathmtu before appending chunks,
which can void dropping packets in sctp_packet_transmit when dst is
obsolete or dst's mtu is changed.
This patch is also to improve some other codes in sctp_packet_config.
It updates packet max_size with gso_max_size, checks for dst and
pathmtu, and appends ecne chunk only when packet is empty and asoc
is not NULL.
It makes sctp flush work better, as we only need to set up them once
for one flush schedule. It's also safe, since asoc is NULL only when
the packet is created by sctp_ootb_pkt_new in which it just gets the
new dst, no need to do more things for it other than set packet with
transport's pathmtu.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Mon, 3 Apr 2017 19:42:58 +0000 (15:42 -0400)]
flow dissector: correct size of storage for ARP
The last argument to __skb_header_pointer() should be a buffer large
enough to store struct arphdr. This can be a pointer to a struct arphdr
structure. The code was previously using a pointer to a pointer to
struct arphdr.
By my counting the storage available both before and after is 8 bytes on
x86_64.
Fixes: 55733350e5e8 ("flow disector: ARP support") Reported-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Without PCI_HOST_COMMON support enabled, we get a link error:
drivers/pci/dwc/built-in.o: In function `hisi_pcie_map_bus':
pcie-hisi.c:(.text+0x8860): undefined reference to `pci_ecam_map_bus'
drivers/pci/dwc/built-in.o: In function `hisi_pcie_almost_ecam_probe':
pcie-hisi.c:(.text+0x88b4): undefined reference to `pci_host_common_probe'
Add an explicit 'select', as the other users have.
SZ_16M PEM resource size includes PEM-specific register and its children
resources. Reservation of the whole SZ_16M range leads to child device
driver failure when pcieport driver is requesting resources:
pcieport 0004:1f:00.0: can't enable device: BAR 0 [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] not claimed
So we cannot reserve full 16M here and instead we want to reserve
PEM-specific register only which is SZ_64K.
At the end increase PEM resource to SZ_16M since this is what
thunder_pem_init() call expects for proper initialization.
Fixes: 9abb27c7594a ("PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller") Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.10+
Jordan Crouse [Mon, 6 Feb 2017 17:39:29 +0000 (10:39 -0700)]
drm/msm: Make sure to detach the MMU during GPU cleanup
We should be detaching the MMU before destroying the address
space. To do this cleanly, the detach has to happen in
adreno_gpu_cleanup() because it needs access to structs
in adreno_gpu.c. Plus it is better symmetry to have
the attach and detach at the same code level.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Archit Taneja [Fri, 17 Mar 2017 03:39:48 +0000 (09:09 +0530)]
drm/msm/mdp5: Update SSPP_MAX value
'SSPP_MAX + 1' is the max number of hwpipes that can be present on a
MDP5 platform. Recently, 2 new cursor hwpipes were added, which
caused overflows in arrays that used SSPP_MAX to represent the number
of elements. Update the SSPP_MAX value to incorporate the extra
hwpipes.
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Archit Taneja [Thu, 16 Feb 2017 10:59:04 +0000 (16:29 +0530)]
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.
Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.
Fixes: b62aa70a98c5 (drm/msm/dsi: Move PHY operations out of host) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
projects / karo-tx-linux.git / log