Josef Bacik [Wed, 29 Aug 2012 16:24:27 +0000 (12:24 -0400)]
Btrfs: remove unused hint byte argument for btrfs_drop_extents
I audited all users of btrfs_drop_extents and found that nobody actually uses
the hint_byte argument. I'm sure it was used for something at some point but
it's not used now, and the way the pinning works the disk bytenr would never be
immediately useful anyway so lets just remove it. Thanks,
Liu Bo [Mon, 27 Aug 2012 16:52:20 +0000 (10:52 -0600)]
Btrfs: improve fsync by filtering extents that we want
This is based on Josef's "Btrfs: turbo charge fsync".
The above Josef's patch performs very good in random sync write test,
because we won't have too much extents to merge.
However, it does not performs good on the test:
dd if=/dev/zero of=foobar bs=4k count=12500 oflag=sync
The reason is when we do sequencial sync write, we need to merge the
current extent just with the previous one, so that we can get accumulated
extents to log:
A(4k) --> AA(8k) --> AAA(12k) --> AAAA(16k) ...
So we'll have to flush more and more checksum into log tree, which is the
bottleneck according to my tests.
But we can avoid this by telling fsync the real extents that are needed
to be logged.
With this, I did the above dd sync write test (size=50m),
Josef Bacik [Mon, 27 Aug 2012 21:48:15 +0000 (17:48 -0400)]
Btrfs: do not needlessly restart the transaction for enospc
We will stop and restart a transaction every time we move to a different leaf
when truncating a file. This is for enospc reasons, but really we could
probably get away with doing this a little better by actually working until we
hit an ENOSPC. So add a ->failfast flag to the block_rsv and set it when we do
truncates which will fail as soon as the block rsv runs out of space, and then
at that point we can stop and restart the transaction and refill the block rsv
and carry on. This will make rm'ing of a file with lots of extents a bit
faster. Thanks,
Josef Bacik [Fri, 24 Aug 2012 18:48:11 +0000 (14:48 -0400)]
Btrfs: only warn if we hit an error when doing the tree logging
I hit this a couple times while working on my fsync patch (all my bugs, not
normal operation), but with my new stuff we could have new errors from cases
I have not encountered, so instead of BUG()'ing we should be WARN()'ing so
that we are notified there is a problem but the user doesn't lose their
data. We can easily commit the transaction in the case that the tree
logging fails and still be fine, so let's try and be as nice to the user as
possible. Thanks,
Josef Bacik [Fri, 17 Aug 2012 17:14:17 +0000 (13:14 -0400)]
Btrfs: turbo charge fsync
At least for the vm workload. Currently on fsync we will
1) Truncate all items in the log tree for the given inode if they exist
and
2) Copy all items for a given inode into the log
The problem with this is that for things like VMs you can have lots of
extents from the fragmented writing behavior, and worst yet you may have
only modified a few extents, not the entire thing. This patch fixes this
problem by tracking which transid modified our extent, and then when we do
the tree logging we find all of the extents we've modified in our current
transaction, sort them and commit them. We also only truncate up to the
xattrs of the inode and copy that stuff in normally, and then just drop any
extents in the range we have that exist in the log already. Here are some
numbers of a 50 meg fio job that does random writes and fsync()s after every
write
Original Patched
SATA drive 82KB/s 140KB/s
Fusion drive 431KB/s 2532KB/s
So around 2-6 times faster depending on your hardware. There are a few
corner cases, for example if you truncate at all we have to do it the old
way since there is no way to be sure what is in the log is ok. This
probably could be done smarter, but if you write-fsync-truncate-write-fsync
you deserve what you get. All this work is in RAM of course so if your
inode gets evicted from cache and you read it in and fsync it we'll do it
the slow way if we are still in the same transaction that we last modified
the inode in.
The biggest cool part of this is that it requires no changes to the recovery
code, so if you fsync with this patch and crash and load an old kernel, it
will run the recovery and be a-ok. I have tested this pretty thoroughly
with an fsync tester and everything comes back fine, as well as xfstests.
Thanks,
Josef Bacik [Thu, 16 Aug 2012 20:32:06 +0000 (16:32 -0400)]
Btrfs: fix possible corruption when fsyncing written prealloced extents
While working on my fsync patch my fsync tester kept hitting mismatching
md5sums when I would randomly write to a prealloc'ed region, syncfs() and
then write to the prealloced region some more and then fsync() and then
immediately reboot. This is because the tree logging code will skip writing
csums for file extents who's generation is less than the current running
transaction. When we mark extents as written we haven't been updating their
generation so they were always being skipped. This wouldn't happen if you
were to preallocate and then write in the same transaction, but if you for
example prealloced a VM you could definitely run into this problem. This
patch makes my fsync tester happy again. Thanks,
Josef Bacik [Tue, 14 Aug 2012 20:20:52 +0000 (16:20 -0400)]
Btrfs: do not allocate chunks as agressively
Swinging this pendulum back the other way. We've been allocating chunks up
to 2% of the disk no matter how much we actually have allocated. So instead
fix this calculation to only allocate chunks if we have more than 80% of the
space available allocated. Please test this as it will likely cause all
sorts of ENOSPC problems to pop up suddenly. Thanks,
Josef Bacik [Mon, 13 Aug 2012 19:43:26 +0000 (15:43 -0400)]
Btrfs: update last trans if we don't update the inode
There is a completely impossible situation to hit where you can preallocate
a file, fsync it, write into the preallocated region, have the transaction
commit twice and then fsync and then immediately lose power and lose all of
the contents of the write. This patch fixes this just so I feel better
about the situation and because it is lightweight, we just update the
last_trans when we finish an ordered IO and we don't update the inode
itself. This way we are completely safe and I feel better. Thanks,
Chris Mason [Tue, 7 Aug 2012 20:25:13 +0000 (16:25 -0400)]
Btrfs: fix btrfs send for inline items and compression
The btrfs send code was assuming the offset of the file item into the
extent translated to bytes on disk. If we're compressed, this isn't
true, and so it was off into extents owned by other files.
It was also improperly handling inline extents. This solves a crash
where we may have gone past the end of the file extent item by not
testing early enough for an inline extent. It also solves problems
where we have a whole between the end of the inline item and the start
of the full extent.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Alexander Block [Wed, 1 Aug 2012 10:46:05 +0000 (12:46 +0200)]
Btrfs: fix check for changed extent in is_extent_unchanged
The previous check was working fine, but this check should be
easier to read. Also, we could theoritically have some exotic
bugs with the previous checks.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Alexander Block [Sat, 28 Jul 2012 14:09:35 +0000 (16:09 +0200)]
Btrfs: update send_progress at correct places
Updating send_progress in process_recorded_refs was not correct.
It got updated too early in the cur_inode_new_gen case.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com> Reported-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Alexander Block <ablock84@googlemail.com>
Alexander Block [Sat, 28 Jul 2012 12:20:58 +0000 (14:20 +0200)]
Btrfs: fix use of radix_tree for name_cache in send/receive
We can't easily use the index of the radix tree for inums as the
radix tree uses 32bit indexes on 32bit kernels. For 32bit kernels,
we now use the lower 32bit of the inum as index and an additional
list to store multiple entries per radix tree entry.
Reported-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Alexander Block <ablock84@googlemail.com>
Alexander Block [Sat, 28 Jul 2012 08:42:24 +0000 (10:42 +0200)]
Btrfs: fix cur_ino < parent_ino case for send/receive
When the current inodes inum is smaller then the inum of the
parent directory strange things were happending due to wrong
path resolution and other bugs. Fix this with a new approach
for the problem.
Reported-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com> Signed-off-by: Alexander Block <ablock84@googlemail.com>
IBM reported a deadlock in select_parent(). This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.
There are two cases when the traversal needs to be restarted:
1) concurrent d_move(); this can only happen when not already locked,
since taking rename_lock protects against concurrent d_move().
2) racing with final d_put() on child just at the moment of ascending
to parent; rename_lock doesn't protect against this rare race, so it
can happen when already locked.
Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held. This patch fixes all three callers of
try_to_ascend().
IBM reported that the deadlock is gone with this patch.
[ I rewrote the patch to be smaller and just do the "goto again" if the
lock was already held, but credit goes to Miklos for the real work.
- Linus ]
Merge tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two small patches:
* One patch to fix the function declarations for
!CONFIG_IOMMU_API. This is causing build errors
in linux-next and should be fixed for v3.6.
* Another patch to fix an IOMMU group related NULL pointer
dereference."
* tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix wrong assumption in iommu-group specific code
iommu: static inline iommu group stub functions
Pull NVMe driver fixes from Matthew Wilcox:
"Now that actual hardware has been released (don't have any yet
myself), people are starting to want some of these fixes merged."
Willy doesn't have hardware? Guys...
* git://git.infradead.org/users/willy/linux-nvme:
NVMe: Cancel outstanding IOs on queue deletion
NVMe: Free admin queue memory on initialisation failure
NVMe: Use ida for nvme device instance
NVMe: Fix whitespace damage in nvme_init
NVMe: handle allocation failure in nvme_map_user_pages()
NVMe: Fix uninitialized iod compiler warning
NVMe: Do not set IO queue depth beyond device max
NVMe: Set block queue max sectors
NVMe: use namespace id for nvme_get_features
NVMe: replace nvme_ns with nvme_dev for user admin
NVMe: Fix nvme module init when nvme_major is set
NVMe: Set request queue logical block size
Sasha Levin has been running trinity in a KVM tools guest, and was able
to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of
the memory type). The call trace showed that it was mtdchar_mmap() that
created an invalid remap_pfn_range().
The problem is that mtdchar_mmap() does various really odd and subtle
things with the vma page offset etc, and uses the wrong types (and the
wrong overflow) detection for it.
For example, the page offset may well be 32-bit on a 32-bit
architecture, but after shifting it up by PAGE_SHIFT, we need to use a
potentially 64-bit resource_size_t to correctly hold the full value.
Also, we need to check that the vma length plus offset doesn't overflow
before we check that it is smaller than the length of the mtdmap region.
This fixes things up and tries to make the code a bit easier to read.
1) Netfilter xt_limit module can use uninitialized rules, from Jan
Engelhardt.
2) Wei Yongjun has found several more spots where error pointers were
treated as NULL/non-NULL and vice versa.
3) bnx2x was converted to pci_io{,un}map() but one remaining plain
iounmap() got missed. From Neil Horman.
4) Due to a fence-post type error in initialization of inetpeer entries
(which is where we store the ICMP rate limiting information), we can
erroneously drop ICMPs if the inetpeer was created right around when
jiffies wraps.
Fix from Nicolas Dichtel.
5) smsc75xx resume fix from Steve Glendinnig.
6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.
7) qlcnic uses msleep() with locks held, fix from Narendra K.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netdev: octeon: fix return value check in octeon_mgmt_init_phy()
inetpeer: fix token initialization
qlcnic: Fix scheduling while atomic bug
bnx2: Clean up remaining iounmap
net: phy: smsc: Implement PHY config_init for LAN87xx
smsc75xx: fix resume after device reset
netdev: pasemi: fix return value check in pasemi_mac_phy_init()
team: fix return value check
l2tp: fix return value check
netfilter: xt_limit: have r->cost != 0 case work
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes; one for automount/lazy umount race, another a
classic "we don't protect the refcount transition to zero with the
lock that protects looking for object in hash" kind of crap in lockd."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
close the race in nlmsvc_free_block()
do_add_mount()/umount -l races
Merge branch 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger.
* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Preinclude include/linux/kern_levels.h
um: Fix IPC on um
um: kill thread->forking
um: let signal_delivered() do SIGTRAP on singlestepping into handler
um: don't leak floating point state and segment registers on execve()
um: take cleaning singlestep to start_thread()
Merge tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Pull dm fixes from Alasdair G Kergon:
"A few fixes for problems discovered during the 3.6 cycle.
Of particular note, are fixes to the thin target's discard support,
which I hope is finally working correctly; and fixes for multipath
ioctls and device limits when there are no paths."
* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm verity: fix overflow check
dm thin: fix discard support for data devices
dm thin: tidy discard support
dm: retain table limits when swapping to new table with no devices
dm table: clear add_random unless all devices have it set
dm: handle requests beyond end of device instead of using BUG_ON
dm mpath: only retry ioctl when no paths if queue_if_no_path set
dm thin: do not set discard_zeroes_data
Andrea Arcangeli [Fri, 28 Sep 2012 12:35:31 +0000 (14:35 +0200)]
thp: avoid VM_BUG_ON page_count(page) false positives in __collapse_huge_page_copy
Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
iommu/amd: Fix wrong assumption in iommu-group specific code
The new IOMMU groups code in the AMD IOMMU driver makes the
assumption that there is a pci_dev struct available for all
device-ids listed in the IVRS ACPI table. Unfortunatly this
assumption is not true and so this code causes a NULL
pointer dereference at boot on some systems.
Fix it by making sure the given pointer is never NULL when
passed to the group specific code. The real fix is larger
and will be queued for v3.7.
netdev: octeon: fix return value check in octeon_mgmt_init_phy()
In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"The three nouveau fixes quiten unneeded dmesg spam that people are
seeing and pondering,
The udl fix stops it from trying to driver monitors that are too big,
where we get a black screen.
And a vmware memory alloc problem."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
drm/udl: limit modes to the sku pixel limits.
vmwgfx: corruption in vmw_event_fence_action_create()
drm/nvc0/ltcg: mask off intr 0x10
drm/nouveau: silence a debug message triggered by newer userspace
Merge tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are two USB bugfixes for your 3.6-rc7 tree.
The OHCI fix has been reported a number of times and is a regression
from 3.5, and the patch that causes the regression was on the way to
the -stable trees before I was reminded (again) that this fix needed
to get to your tree soon.
The host controller bugfix was reported in older kernels as being
pretty easy to trigger, and has been tested by Red Hat and their
customers.
Both have been in the usb-next branch in the -next tree for a while
now, I just cherry-picked them out to get to you in time for the 3.6
release.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Fix race condition when removing host controllers
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
Nicolas Dichtel [Thu, 27 Sep 2012 04:11:00 +0000 (04:11 +0000)]
inetpeer: fix token initialization
When jiffies wraps around (for example, 5 minutes after the boot, see
INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be
< XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus
some icmp packets can be unexpectedly dropped.
Fix this case by initializing last_rate to 60 seconds in the past.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Narendra K [Tue, 25 Sep 2012 07:53:19 +0000 (07:53 +0000)]
qlcnic: Fix scheduling while atomic bug
In the device close path, 'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' call msleep. But 'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock
held resulting in scheduling while atomic bug causing the following
trace.
I observed that the commit 012dc19a45b2b9cc2ebd14aaa401cf782c2abba4
from John Fastabend addresses a similar issue in ixgbevf driver.
Adopting the same approach used in the commit, this patch uses mdelay
to address the issue.
Neil Horman [Wed, 26 Sep 2012 07:22:02 +0000 (07:22 +0000)]
bnx2: Clean up remaining iounmap
commit c0357e975afdbbedab5c662d19bef865f02adc17 modified bnx2 to switch from
using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error
path of bnx2_init_one though. This patch just cleans that up.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Michael Chan <mcan@broadcom.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull one more arm-soc bugfix from Olof Johansson:
"Here's a bugfix for orion5x. Without this, PCI doesn't initialize
properly because of too small coherent pool to cover the allocations
needed.
A similar fix has already been done on kirkwood."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Orion5x: Fix too small coherent pool.
Merge tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver
where a callback ignores one of its arguments. It needs to go into
stable too so sending this upstream immediately."
* tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio-lpc32xx: Fix value handling of gpio_direction_output()
Merge tag 'md-3.6-fixes' of git://neil.brown.name/md
Pull two md bugfixes from NeilBrown:
"One (missing spinlock init) was only introduced recently. The other
has been present as long as raid10 has been supported, so is tagged
for -stable."
* tag 'md-3.6-fixes' of git://neil.brown.name/md:
md/raid10: fix "enough" function for detecting if array is failed.
md/raid5: add missing spin_lock_init.
Pull EDAC fixes from Mauro Carvalho Chehab:
"Three edac fixes at the memory enumeration logic:
- i3200_edac: Fixes a regression at the memory rank size, when the
memorias are dual-rank;
- i5000_edac: Fix a longstanding bug when calculating the memory
size: before Kernel 3.6, the memory size were right only
with one specific configuration;
- sb_edac: Fixes a bug since the initial release of the driver:
with 16GB DIMMs, there's an overflow at the memory size,
causing the number of pages per dimm (an unsigned value)
to have the highest bit equal to 1, effectively mangling
the memory size.
The third bug can potentially affect the error decoding logic as well."
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
sb_edac: Avoid overflow errors at memory size calculation
i5000: Fix the memory size calculation with 2R memories
i3200_edac: Fix memory rank size
Marek Vasut [Tue, 25 Sep 2012 10:17:42 +0000 (10:17 +0000)]
net: phy: smsc: Implement PHY config_init for LAN87xx
The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving
capability. Enabling it leads to the PHY not being able to detect Link when
cold-started without cable connected. Thus, make sure this is disabled.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christian Hohnstaedt <chohnstaedt@innominate.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
The userspace part of UML uses the asm-offsets.h generator mechanism to
create definitions for UM_KERN_<LEVEL> that match the in-kernel
KERN_<LEVEL> constant definitions.
As of commit 04d2c8c83d0e3ac5f78aeede51babb3236200112 ("printk: convert
the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no
longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e.
it contains two parts.
However, the combo of DEFINE_STR() in
arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't
support string literals consisting of multiple parts. Hence for all
UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual
definition, while the remainder ends up in the comment. E.g. in
include/generated/asm-offsets.h we get
#define UM_KERN_INFO "\001" /* "6" KERN_INFO */
instead of
#define UM_KERN_INFO "\001" "6" /* KERN_INFO */
This causes spurious '^A' output in some kernel messages:
Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
^AChecking that host ptys support output SIGIO...Yes
^AChecking that host ptys support SIGIO on close...No, enabling workaround
^AUsing 2.6 host AIO
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource itimer
To fix this:
- Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from
arch/um/include/shared/common-offsets.h to
arch/um/include/shared/user.h, which is preincluded for all userspace
parts,
- Preinclude include/linux/kern_levels.h for all userspace parts, to
obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't
violate the kernel/userspace separation, as include/linux/kern_levels.h
is self-contained and doesn't expose any other kernel internals.
- Remove the now unused STR() and DEFINE_STR() macros.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at>
commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION)
forgot UML and broke IPC on it.
Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig.
Reported-and-tested-by: <Toralf Förster toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
netdev: pasemi: fix return value check in pasemi_mac_phy_init()
In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function genlmsg_put() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function genlmsg_put() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Stern [Wed, 26 Sep 2012 17:09:53 +0000 (13:09 -0400)]
USB: Fix race condition when removing host controllers
This patch (as1607) fixes a race that can occur if a USB host
controller is removed while a process is reading the
/sys/kernel/debug/usb/devices file.
The usb_device_read() routine uses the bus->root_hub pointer to
determine whether or not the root hub is registered. The is not a
valid test, because the pointer is set before the root hub gets
registered and remains set even after the root hub is unregistered and
deallocated. As a result, usb_device_read() or usb_device_dump() can
access freed memory, causing an oops.
The patch changes the test to use the hcd->rh_registered flag, which
does get set and cleared at the appropriate times. It also makes sure
to hold the usb_bus_list_lock mutex while setting the flag, so that
usb_device_read() will become aware of new root hubs as soon as they
are registered.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6fffb77c (USB: ohci-at91: fix PIO handling in relation with number of
ports) started setting unused pins to EINVAL. But this exposed a bug in the
ohci_hcd_at91_overcurrent_irq function where the gpio was used without being
checked to see if it is valid.
This patches fixed the issue by adding the gpio valid check.
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: stable <stable@vger.kernel.org> # [3.4+] whereever 6fffb77c went Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Thu, 20 Sep 2012 13:28:25 +0000 (09:28 -0400)]
um: kill thread->forking
we only use that to tell copy_thread() done by syscall from that
done by kernel_thread(). However, it's easier to do simply by
checking PF_KTHREAD in thread flags.
Merge sys_clone() guts for 32bit and 64bit, while we are at it...
Dave Airlie [Thu, 27 Sep 2012 07:58:53 +0000 (17:58 +1000)]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Another spurious dmesg quitening.
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
md/raid10: fix "enough" function for detecting if array is failed.
The 'enough' function is written to work with 'near' arrays only
in that is implicitly assumes that the offset from one 'group' of
devices to the next is the same as the number of copies.
In reality it is the number of 'near' copies.
So change it to make this number explicit.
This bug makes it possible to run arrays without enough drives
present, which is dangerous.
It is appropriate for an -stable kernel, but will almost certainly
need to be modified for some of them.
Cc: stable@vger.kernel.org Reported-by: Jakub Husák <jakub@gooseman.cz> Signed-off-by: NeilBrown <neilb@suse.de>
Andrew Lunn [Mon, 24 Sep 2012 05:54:33 +0000 (07:54 +0200)]
ARM: Orion5x: Fix too small coherent pool.
Some Orion5x devices allocate their coherent buffers from atomic
context. Increase size of atomic coherent pool to make sure such the
allocations won't fail during boot.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
Ben Skeggs [Wed, 26 Sep 2012 23:13:43 +0000 (09:13 +1000)]
drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
PFIFO_INTR = 0x40000000 appears to be a normal case on nvc0/nve0 PFIFO,
the binary driver appears to completely ignore it in its PFIFO interrupt
handler and even masks off the bit (as we do) in PFIFO_INTR_EN at init
time.
The bits still light up in the hardware sometimes though, so lets just
ignore any bits we haven't explicitely requested.
Mike Snitzer [Wed, 26 Sep 2012 22:45:47 +0000 (23:45 +0100)]
dm thin: fix discard support for data devices
The discard limits that get established for a thin-pool or thin device
may be incompatible with the pool's data device. Avoid this by checking
the discard limits of the pool's data device. If an incompatibility is
found then the pool's 'discard passdown' feature is disabled.
Change thin_io_hints to ensure that a thin device always uses the same
queue limits as its pool device.
Introduce requested_pf to track whether or not the table line originally
contained the no_discard_passdown flag and use this directly for table
output. We prepare the correct setting for discard_passdown directly in
bind_control_target (called from pool_io_hints) and store it in
adjusted_pf rather than waiting until we have access to pool->pf in
pool_preresume.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Wed, 26 Sep 2012 22:45:46 +0000 (23:45 +0100)]
dm thin: tidy discard support
A little thin discard code refactoring to make the next patch (dm thin:
fix discard support for data devices) more readable.
Pull out a couple of functions (and uses bools instead of unsigned for
features).
No functional changes.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Wed, 26 Sep 2012 22:45:45 +0000 (23:45 +0100)]
dm: retain table limits when swapping to new table with no devices
Add a safety net that will re-use the DM device's existing limits in the
event that DM device has a temporary table that doesn't have any
component devices. This is to reduce the chance that requests not
respecting the hardware limits will reach the device.
DM recalculates queue limits based only on devices which currently exist
in the table. This creates a problem in the event all devices are
temporarily removed such as all paths being lost in multipath. DM will
reset the limits to the maximum permissible, which can then assemble
requests which exceed the limits of the paths when the paths are
restored. The request will fail the blk_rq_check_limits() test when
sent to a path with lower limits, and will be retried without end by
multipath. This became a much bigger issue after v3.6 commit fe86cdcef
("block: do not artificially constrain max_sectors for stacking
drivers").
Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Wed, 26 Sep 2012 22:45:43 +0000 (23:45 +0100)]
dm table: clear add_random unless all devices have it set
Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
have it set. Otherwise devices with predictable characteristics may
contribute entropy.
QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings
contribute to the random pool.
For bio-based targets this flag is always 0 because such devices have no
real queue.
For request-based devices this flag was always set to 1 by default.
Now set it according to the flags on underlying devices. If there is at
least one device which should not contribute, set the flag to zero: If a
device, such as fast SSD storage, is not suitable for supplying entropy,
a request-based queue stacked over it will not be either.
Because the checking logic is exactly same as for the rotational flag,
share the iteration function with device_is_nonrot().
Signed-off-by: Milan Broz <mbroz@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Wed, 26 Sep 2012 22:45:42 +0000 (23:45 +0100)]
dm: handle requests beyond end of device instead of using BUG_ON
The access beyond the end of device BUG_ON that was introduced to
dm_request_fn via commit 29e4013de7ad950280e4b2208 ("dm: implement
REQ_FLUSH/FUA support for request-based dm") was an overly
drastic (but simple) response to this situation.
I have received a report that this BUG_ON was hit and now think
it would be better to use dm_kill_unmapped_request() to fail the clone
and original request with -EIO.
map_request() will assign the valid target returned by
dm_table_find_target to tio->ti. But when the target
isn't valid tio->ti is never assigned (because map_request isn't
called); so add a check for tio->ti != NULL to dm_done().
Reported-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Wed, 26 Sep 2012 22:45:41 +0000 (23:45 +0100)]
dm mpath: only retry ioctl when no paths if queue_if_no_path set
When there are no paths and multipath receives an ioctl, it waits until
a path becomes available. This behaviour is incorrect if the
"queue_if_no_path" setting was not specified, as then the ioctl should
be rejected immediately, which this patch now does.
commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should
have checked if queue_if_no_path was configured before queueing IO.
Checking for the queue_if_no_path feature, like is done in map_io(),
allows the following table load to work without blocking in the
multipath_ioctl retry loop:
Mike Snitzer [Wed, 26 Sep 2012 22:45:39 +0000 (23:45 +0100)]
dm thin: do not set discard_zeroes_data
The dm thin pool target claims to support the zeroing of discarded
data areas. This turns out to be incorrect when processing discards
that do not exactly cover a complete number of blocks, so the target
must always set discard_zeroes_data_unsupported.
The thin pool target will zero blocks when they are allocated if the
skip_block_zeroing feature is not specified. The block layer
may send a discard that only partly covers a block. If a thin pool
block is partially discarded then there is no guarantee that the
discarded data will get zeroed before it is accessed again.
Due to this, thin devices cannot claim discards will always zero data.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming
Pull c6x arch fixes from Mark Salter:
- Add __NR_kcmp to generic syscall list
- C6X: Use generic asm/barrier.h
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
syscalls: add __NR_kcmp syscall to generic unistd.h
c6x: use asm-generic/barrier.h
Mark Salter [Mon, 24 Sep 2012 19:19:26 +0000 (15:19 -0400)]
syscalls: add __NR_kcmp syscall to generic unistd.h
Commit d97b46a64 ("syscalls, x86: add __NR_kcmp syscall" ) added a new
syscall to support checkpoint restore. It is currently x86-only, but
that restriction will be removed in a subsequent patch. Unfortunately,
the kernel checksyscalls script had a bug which suppressed any warning
to other architectures that the kcmp syscall was not implemented. A
patch to checksyscalls is being tested in linux-next and other
architectures are seeing warnings about kcmp being unimplemented.
This patch adds __NR_kcmp to <asm-generic/unistd.h> so that kcmp is
wired in for architectures using the generic syscall list.
Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
Dan Carpenter [Sun, 23 Sep 2012 16:33:55 +0000 (19:33 +0300)]
vmwgfx: corruption in vmw_event_fence_action_create()
We don't allocate enough data for this struct. As soon as we start
modifying event->event on the next lines, then we're going beyond the
end of the memory we allocated.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com>
Dave Airlie [Wed, 26 Sep 2012 08:36:55 +0000 (18:36 +1000)]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
These just silence some printks that we are seeing that we shouldn't
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/ltcg: mask off intr 0x10
drm/nouveau: silence a debug message triggered by newer userspace
1) Eric Dumazet discovered and fixed what turned out to be a family of
bugs. These functions were using pskb_may_pull() which might need
to reallocate the linear SKB data buffer, but the callers were not
expecting this possibility. The callers have cached pointers to the
packet header areas, and would need to reload them if we were to
continue using pskb_may_pull().
So they could end up reading garbage.
It's easier to just change these RAW4/RAW6/MIP6 routines to use
skb_header_pointer() instead of pskb_may_pull(), which won't modify
the linear SKB data area.
2) Dave Jone's syscall spammer caught a case where a non-TCP socket can
call down into the TCP keepalive code. The case basically involves
creating a raw socket with sk_protocol == IPPROTO_TCP, then calling
setsockopt(sock_fd, SO_KEEPALIVE, ...)
Fixed by Eric Dumazet.
3) Bluetooth devices do not get configured properly while being powered
on, resulting in always using legacy pairing instead of SSP. Fix
from Andrzej Kaczmarek.
4) Bluetooth cancels delayed work erroneously, put stricter checks in
place. From Andrei Emeltchenko.
5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in
cfg80211, from Luis R. Rodriguez.
6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach.
7) Missing module license in bcm87xx driver, from Peter Huewe.
8) Team driver can lose port changed events when adding devices to a
team, fix from Jiri Pirko.
9) Fix endless loop when trying ot unregister PPPOE device in zombie
state, from Xiaodong Xu.
10) batman-adv layer needs to set MAC address of software device
earlier, otherwise we call tt_local_add with it uninitialized.
11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but
that doesn't program the device properly. From Marek Vasut.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
ipv6: mip6: fix mip6_mh_filter()
ipv6: raw: fix icmpv6_filter()
net: guard tcp_set_keepalive() to tcp sockets
phy/micrel: Add missing header to micrel_phy.h
phy/micrel: Rename KS80xx to KSZ80xx
phy/micrel: Implement support for KSZ8021
batman-adv: Fix symmetry check / route flapping in multi interface setups
batman-adv: Fix change mac address of soft iface.
pppoe: drop PPPOX_ZOMBIEs in pppoe_release
team: send port changed when added
ipv4: raw: fix icmp_filter()
net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver
iwlwifi: don't double free the interrupt in failure path
cfg80211: fix possible circular lock on reg_regdb_search()
Bluetooth: Fix not removing power_off delayed work
Bluetooth: Fix freeing uninitialized delayed works
Bluetooth: mgmt: Fix enabling LE while powered off
Bluetooth: mgmt: Fix enabling SSP while powered off
projects / linux-beck.git / log