Where function-list is a comma separated list of functions to filter.
The ftrace_notrace will make the functions listed not be included
in the function tracing, and ftrace_filter will only trace the functions
listed.
These two act the same as the debugfs/tracing/set_ftrace_notrace and
debugfs/tracing/set_ftrace_filter respectively.
The simple glob expressions that are allowed by the filter files can also
be used by the command line interface.
ftrace_notrace=rcu*,*lock,*spin*
Will not trace any function that starts with rcu, ends with lock, or has
the word spin in it.
Note, if the self tests are enabled, they may interfere with the filtering
set by the command lines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Zhaolei [Wed, 27 May 2009 13:36:02 +0000 (21:36 +0800)]
ftrace: don't convert function's local variable name in macro
"call" is an argument of macro, but it is also used as a local
variable name of function in macro.
We should keep this local variable name distinct from any
CPP macro parameter name if both are in the same macro scope,
although it hasn't caused any problem yet.
[ Impact: robustify macro ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Heiko Carstens [Tue, 26 May 2009 15:28:02 +0000 (17:28 +0200)]
trace: disable preemption before taking raw spinlocks
s390 code uses smp_processor_id() in __raw_spin_lock() code which
reveals that a (raw) spinlock is taken without preemption disabled.
This can potentially deadlock.
To fix this explicitly disable and enable preemption.
Steven Rostedt [Wed, 20 May 2009 23:56:19 +0000 (19:56 -0400)]
tracing: convert irq events to use __print_symbolic
The recording of the names at trace time is inefficient. This patch
implements the softirq event recording to only record the vector
and then use the __print_symbolic interface to print out the names.
[ Impact: faster recording of softirq events ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Steven Rostedt [Wed, 20 May 2009 23:21:47 +0000 (19:21 -0400)]
tracing: add __print_symbolic to trace events
This patch adds __print_symbolic which is similar to __print_flags but
works for an enumeration type instead. That is, there is only a one to one
mapping between the values and the symbols. When a match is made, then
it is printed, otherwise the hex value is outputed.
[ Impact: add interface for showing symbol names in events ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Steven Rostedt [Fri, 15 May 2009 20:16:30 +0000 (16:16 -0400)]
tracing: add flag output for kmem events
This patch changes the output for gfp_flags from being a simple hex value
to the actual names.
gfp_flags=GFP_ATOMIC instead of gfp_flags=00000020
And even
gfp_flags=GFP_KERNEL instead of gfp_flags=000000d0
(Thanks to Frederic Weisbecker for pointing out that the first version
had a bad order of GFP masks)
[ Impact: more human readable output from tracer ]
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Steven Rostedt [Fri, 15 May 2009 14:51:13 +0000 (10:51 -0400)]
tracing: add previous task state info to sched switch event
It is useful to see the state of a task that is being switched out.
This patch adds the output of the state of the previous task in
the context switch event.
[ Impact: see state of switched out task in context switch ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Steven Rostedt [Tue, 26 May 2009 18:25:22 +0000 (20:25 +0200)]
tracing: add __print_flags for events
Developers have been asking for the ability in the ftrace event tracer
to display names of bits in a flags variable.
Instead of printing out c2, it would be easier to read FOO|BAR|GOO,
assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7.
Some examples where this would be useful are the state flags in a context
switch, kmalloc flags, and even permision flags in accessing files.
[
v2 changes include:
Frederic Weisbecker's idea of using a mask instead of bits,
thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS.
Li Zefan's idea of allowing the caller of __print_flags to add their
own delimiter (or no delimiter) where we can get for file permissions
rwx instead of r|w|x.
]
[
v3 changes:
Christoph Hellwig's idea of using an array instead of va_args.
]
[ Impact: better displaying of flags in trace output ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Zhaolei [Mon, 25 May 2009 10:11:59 +0000 (18:11 +0800)]
ftrace: Add task_comm support for trace_event
If we enable a trace event alone without any tracer running (such as
function tracer, sched switch tracer, etc...) it can't output enough
task command information.
We need to use the tracing_{start/stop}_cmdline_record() helpers
which are designed to keep track of cmdlines for any tasks that
were scheduled during the tracing.
Changelog:
v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in
ENABLE_EVENT_TRACING
v2->v3: v2 can solve problem that was caused by config EVENT_TRACING
alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is
selected by other config, compile fail happened again.
This version solves it.
[ Impact: fix incomplete output of event tracing ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Lai Jiangshan [Mon, 18 May 2009 11:35:34 +0000 (19:35 +0800)]
tracing: add trace_event_read_lock()
I found that there is nothing to protect event_hash in
ftrace_find_event(). Rcu protects the event hashlist
but not the event itself while we use it after its extraction
through ftrace_find_event().
This lack of a proper locking in this spot opens a race
window between any event dereferencing and module removal.
If the event retrieved belongs to a module and this module
is concurrently removed, we may end up dereferencing a data
from a freed module.
RCU could solve this, but it would add latency to the kernel and
forbid tracers output callbacks to call any sleepable code.
So this fix converts 'trace_event_mutex' to a read/write semaphore,
and adds trace_event_read_lock() to protect ftrace_find_event().
[ Impact: fix possible freed memory dereference in ftrace ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A114806.7090302@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Stefan Raspl [Tue, 19 May 2009 07:59:08 +0000 (09:59 +0200)]
blktrace: remove debugfs entries on bad path
debugfs directory entries for devices are not removed on some
of the failure pathes in do_blk_trace_setup().
One way to reproduce is to start blktrace on multiple devices
with insufficient Vmalloc space: Devices will fail with
a message like this:
If so, the respective entries in debugfs
(e.g. /sys/kernel/debug/block/sdu) will remain and subsequent
attempts to start blktrace on the respective devices will not
succeed due to existing directories.
[ Impact: fix /debug/tracing file cleanup corner case ]
Signed-off-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Acked-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com
LKML-Reference: <4A1266CC.5040801@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Tue, 19 May 2009 06:43:15 +0000 (14:43 +0800)]
tracing/events: Documentation updates
- fix some typos
- document the difference between '>' and '>>'
- document the 'enable' toggle
- remove section "Defining an event-enabled tracepoint", since it's
out-dated and sample/trace_events/ already serves this purpose.
Linus Torvalds [Fri, 15 May 2009 23:47:55 +0000 (16:47 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI MSI: Fix MSI-X with NIU cards
PCI: Fix pci-e port driver slot_reset bad default return value
Linus Torvalds [Fri, 15 May 2009 20:22:11 +0000 (13:22 -0700)]
Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
drm/i915: Set HDMI hot plug interrupt enable for only the output in question.
drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS.
drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.
drm/i915: ignore LVDS on intel graphics systems that lie about having it
drm/i915: sanity check IER at wait_request time
drm/i915: workaround IGD i2c bus issue in kernel side (v2)
drm/i915: Don't allow binding objects into the last page of the aperture.
drm/i915: save/restore fence registers across suspend/resume
drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
Linus Torvalds [Fri, 15 May 2009 19:04:37 +0000 (12:04 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: Media rotation rate and form factor heuristics
libata: Report disk alignment and physical block size
sata_fsl: Fix the command description of FSL SATA controller
sata_fsl: Fix compile warnings
[libata] sata_sx4: fixup interrupt handling
[libata] sata_sx4: convert to new exception handling methods
* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6:
iwlwifi: fix device id registration for 6000 series 2x2 devices
ath5k: update channel in sw state after stopping RX and TX
rtl8187: use DMA-aware buffers with usb_control_msg
mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel
airo: airo_get_encode{,ext} potential buffer overflow
Pulled directly by Linus because Davem is off playing shuffle-board at
some Alaskan cruise, and the NULL ptr deref issue hits people and should
get merged sooner rather than later.
David - make us proud on the shuffle-board tournament!
libata: Media rotation rate and form factor heuristics
This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.
The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard. Only then are the
characteristics reported to SCSI via the VPD B1 page.
This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever. With no complaints so far.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
libata: Report disk alignment and physical block size
For disks with 4KB sectors, report the correct block size and alignment
when filling out the READ CAPACITY(16) response.
This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I
fixed the bug I reported a while back caused by ATA and SCSI using
different approaches to describing the alignment.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Dave Liu [Thu, 14 May 2009 14:47:07 +0000 (09:47 -0500)]
sata_fsl: Fix the command description of FSL SATA controller
The bit 11 of command description is reserved bit in Freescale
SATA controller and needs to be set to '1'. This is needed to
make sure the last write from the controller to the buffer
descriptor is seen before an interrupt is raised.
Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Kumar Gala [Thu, 14 May 2009 03:10:50 +0000 (22:10 -0500)]
sata_fsl: Fix compile warnings
We we build with dma_addr_t as a 64-bit quantity we get:
drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg':
drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Linus Torvalds [Fri, 15 May 2009 15:07:25 +0000 (08:07 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix race in ext4_inode_info.i_cached_extent
ext4: Clear the unwritten buffer_head flag after the extent is initialized
ext4: Use a fake block number for delayed new buffer_head
ext4: Fix sub-block zeroing for writes into preallocated extents
Linus Torvalds [Fri, 15 May 2009 15:06:45 +0000 (08:06 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: gdb documentation fix
kgdb,i386: use address that SP register points to in the exception frame
sysrq, intel_fb: fix sysrq g collision
Linus Torvalds [Fri, 15 May 2009 15:05:37 +0000 (08:05 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "mm: add /proc controls for pdflush threads"
viocd: needs to depend on BLOCK
block: fix the bio_vec array index out-of-bounds test
Linus Torvalds [Fri, 15 May 2009 15:05:02 +0000 (08:05 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix PCI ROM access
powerpc/pseries: Really fix the oprofile CPU type on pseries
serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
powerpc/cell: Make ptcal more reliable
powerpc: Allow mem=x cmdline to work with 4G+
powerpc/mpic: Fix incorrect allocation of interrupt rev-map
powerpc: Fix oprofile sampling of marked events on POWER7
powerpc/iseries: Fix pci breakage due to bad dma_data initialization
powerpc: Fix mktree build error on Mac OS X host
powerpc/virtex: Fix duplicate level irq events.
powerpc/virtex: Add uImage to the default images list
powerpc/boot: add simpleImage.* to clean-files list
powerpc/8xx: Update defconfigs
powerpc/embedded6xx: Update defconfigs
powerpc/86xx: Update defconfigs
powerpc/85xx: Update defconfigs
powerpc/83xx: Update defconfigs
powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
devpts_get_sb() calls memset(0) to clear mount options and calls
parse_mount_options() if user specified any mount options.
The memset(0) is bogus since the 'mode' and 'ptmxmode' options are
non-zero by default. parse_mount_options() restores options to default
anyway and can properly deal with NULL mount options.
So in devpts_get_sb() remove memset(0) and call parse_mount_options() even
for NULL mount options.
Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Reported-by: Eric Paris <eparis@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Theodore Ts'o [Fri, 15 May 2009 13:07:28 +0000 (09:07 -0400)]
ext4: Fix race in ext4_inode_info.i_cached_extent
If two CPU's simultaneously call ext4_ext_get_blocks() at the same
time, there is nothing protecting the i_cached_extent structure from
being used and updated at the same time. This could potentially cause
the wrong location on disk to be read or written to, including
potentially causing the corruption of the block group descriptors
and/or inode table.
This bug has been in the ext4 code since almost the very beginning of
ext4's development. Fortunately once the data is stored in the page
cache cache, ext4_get_blocks() doesn't need to be called, so trying to
replicate this problem to the point where we could identify its root
cause was *extremely* difficult. Many thanks to Kevin Shanahan for
working over several months to be able to reproduce this easily so we
could finally nail down the cause of the corruption.
Jason Wessel [Thu, 12 Feb 2009 00:46:32 +0000 (18:46 -0600)]
kgdb,i386: use address that SP register points to in the exception frame
The treatment of the SP register is different on x86_64 and i386.
This is a regression fix that lived outside the mainline kernel from
2.6.27 to now. The regression was a result of the original merge
consolidation of the i386 and x86_64 archs to x86.
The incorrectly reported SP on i386 prevented stack tracebacks from
working correctly in gdb.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Thu, 14 May 2009 02:56:59 +0000 (21:56 -0500)]
sysrq, intel_fb: fix sysrq g collision
Commit 79e539453b34e35f39299a899d263b0a1f1670bd introduced a
regression where you cannot use sysrq 'g' to enter kgdb. The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics. The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.
This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.
David Brownell [Thu, 14 May 2009 20:01:59 +0000 (13:01 -0700)]
ASoC: DaVinci EVM board support buildfixes
This is a build fix, resyncing the DaVinci EVM ASoC board code
with the version in the DaVinci tree. That resync includes
support for the DM355 EVM, although that board isn't yet in
mainline.
(NOTE: also includes a bugfix to the platform_add_resources
call, recently sent by Chaithrika U S <chaithrika@ti.com> but
not yet merged into the DaVinci tree.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
David Brownell [Thu, 14 May 2009 19:47:42 +0000 (12:47 -0700)]
ASoC: DaVinci I2S updates
This resyncs the DaVinci I2S code with the version in the DaVinci
tree. The behavioral change uses updated clock interfaces which
recently merged to mainline. Two other changes include adding a
comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in
order to support more boards than just the DM644x EVM.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
David Brownell [Thu, 14 May 2009 19:41:22 +0000 (12:41 -0700)]
ASoC: davinci-pcm buildfixes
This is a buildfix for the DaVinci PCM code, resyncing it with
the version in the DaVinci tree. The notable change is using
current EDMA interfaces, which recently merged to mainline.
(The older interfaces never made it into mainline.)
NOTE: open issue, the DMA should be to/from SRAM; see chip
errata for more info. The artifacts are extremely easy to
hear on DM355 hardware (not yet supported in mainline), but
don't seem as audible on DM6446 hardwaare (which does have
mainline support).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
A couple of issues crept in since about 2.6.27 related to accessing PCI
device ROMs on various powerpc machines.
First, historically, we don't allocate the ROM resource in the resource
tree. I'm not entirely certain of why, I susepct they often contained
garbage on x86 but it's hard to tell. This causes the current generic
code to always call pci_assign_resource() when trying to access the said
ROM from sysfs, which will try to re-assign some new address regardless
of what the ROM BAR was already set to at boot time. This can be a
problem on hypervisor platforms like pSeries where we aren't supposed
to move PCI devices around (and in fact probably can't).
Second, our code that generates the PCI tree from the OF device-tree
(instead of doing config space probing) which we mostly use on pseries
at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any
resource. That means that any attempt at re-assigning such a resource
with pci_assign_resource() would fail due to resource_alignment()
returning 0.
This fixes this by doing these two things:
- The code that calculates resource flags based on the OF device-node
is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at
it also set IORESOURCE_READONLY for ROMs since we were lacking that too
- We now allocate ROM resources as part of the resource tree. However
to limit the chances of nasty conflicts due to busted firmwares, we
only do it on the second pass of our two-passes allocation scheme,
so that all valid and enabled BARs get precedence.
This brings pSeries back the ability to access PCI ROMs via sysfs (and
thus initialize various video cards from X etc...).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/pseries: Really fix the oprofile CPU type on pseries
My previous pach for fixing the oprofile CPU type got somewhat mismerged
(by my fault) when it collided with another related patch. This should
finally (fingers crossed) fix the whole thing.
We make sure we keep the -old- oprofile type and CPU type whenever
one of them was specified in the first pass through the function.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Krill [Wed, 13 May 2009 05:56:54 +0000 (05:56 +0000)]
serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
The receive interrupt routine checks the wrong register if the
receive fifo is empty. Further an explicit interrupt acknowledge
write is introduced. In some circumstances another interrupt was
issued.
Signed-off-by: Benjamin Krill <ben@codiert.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gerhard Stenzel [Wed, 13 May 2009 05:50:46 +0000 (05:50 +0000)]
powerpc/cell: Make ptcal more reliable
There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.
Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.
We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.
Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Kumar Gala [Fri, 8 May 2009 12:08:20 +0000 (12:08 +0000)]
powerpc/mpic: Fix incorrect allocation of interrupt rev-map
Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map. However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0). This causes us to always call
irq_find_mapping() from mpic_get_irq().
By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Maynard Johnson [Thu, 7 May 2009 05:48:32 +0000 (05:48 +0000)]
powerpc: Fix oprofile sampling of marked events on POWER7
Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.
Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>"). In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt. But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address. With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP. But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information. Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions. The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.
Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/iseries: Fix pci breakage due to bad dma_data initialization
Commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code. Commit 7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation. Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.
Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Timur Tabi [Thu, 30 Apr 2009 18:16:44 +0000 (18:16 +0000)]
powerpc: Fix mktree build error on Mac OS X host
The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails. Change this to
"unsigned int".
Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Fri, 15 May 2009 03:40:06 +0000 (23:40 -0400)]
tracing: stop stack trace on first empty entry
The stack tracer stores eight entries in the ring buffer when an event
traces the stack. The output outputs all eight entries regardless of
how many entries were recorded.
This patch breaks out of the loop when a null entry is discovered.
[ Impact: only print the stack that is recorded ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 15 May 2009 03:19:09 +0000 (23:19 -0400)]
x86/stacktrace: return 0 instead of -1 for stack ops
If we return -1 in the ops->stack for the stacktrace saving, we end up
breaking out of the loop if the stack we are tracing is in the exception
stack. This causes traces like:
Linus Torvalds [Fri, 15 May 2009 02:19:43 +0000 (19:19 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits)
MIPS: Sibyte: Fix locking in set_irq_affinity
MIPS: Use force_sig when handling address errors.
MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read()
MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.
MIPS: Fix highmem.
MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware.
MIPS: MSP71xx: Remove the RAMROOT functions
MIPS: Use -mno-check-zero-division
MIPS: Set compiler options only after the compiler prefix has ben set.
MIPS: IP27: Get rid of #ident. Gcc 4.4.0 doesn't like it.
MIPS: uaccess: Switch lock annotations to might_fault().
MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx reset
MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup
MIPS: Make uaccess.h slightly more sparse friendly.
MIPS: Make access_ok() sideeffect proof.
MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.h
MIPS: Alchemy: Timer build fix
MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK.
MIPS: Cavium: Add support for 8k and 32k page sizes.
MIPS: TXx9: Fix possible overflow in clock calculations
...
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: Spelling fix in btrfs_lookup_first_block_group comments
Btrfs: make show_options result match actual option names
Btrfs: remove outdated comment in btrfs_ioctl_resize()
Btrfs: remove some WARN_ONs in the IO failure path
Btrfs: Don't loop forever on metadata IO failures
Btrfs: init inode ordered_data_close flag properly
Carl Worth [Wed, 29 Apr 2009 21:43:54 +0000 (14:43 -0700)]
drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
This allows userlevel code to discover the pipe number corresponding
to a given CRTC ID. This is necessary for doing pipe-specific
operations such as waiting for vblank on a given CRTC. Failure to use
the right pipe mapping can result in GPU hangs, or at least failure
to actually sync to vblank.
Signed-off-by: Carl Worth <cworth@cworth.org>
[anholt: Style touchups from review] Signed-off-by: Eric Anholt <eric@anholt.net>
Ma Ling [Mon, 11 May 2009 03:33:22 +0000 (11:33 +0800)]
drm/i915: Set HDMI hot plug interrupt enable for only the output in question.
We detect HDMI output connection status by writing to HOT Plug Interrupt
Detect Enable bit in PORT_HOTPLUG_EN. The behavior will generate a specified
interrupt, which is caught by audio driver, but during one detection driver
set all Detect Enable bits of HDMIB, HDMIC HDMID, and generate wrong
interrupt signals for current output, according to the signals audio driver
misunderstand device status. The patch intends to handle corresponding
output precisely.
It fixed freedesktop.org bug #21371
Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Ma Ling [Wed, 13 May 2009 06:46:12 +0000 (14:46 +0800)]
drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.
Although spec say CRT_HOTPLUG_ACTIVATION_PERIOD_64 is only useful for
mobile platform, it is also required to detect vga on G4x desktops correctly.
Tested on G45/G43/Q45 platforms with no regressions.
It fixed freedesktop.org bug #21120 and part of bug #21210
Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Jarod Wilson [Tue, 5 May 2009 14:00:25 +0000 (10:00 -0400)]
drm/i915: ignore LVDS on intel graphics systems that lie about having it
There are a number of small form factor desktop systems with Intel mobile
graphics chips that lie and say they have an LVDS. With kernel mode-setting,
this becomes a problem, and makes native resolution boot go haywire -- for
example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to
have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080
display uses only the top left 1024x768, and auto-configured X will end
up only 1024x768 as well. With this change, graphical boot and X
both do 1920x1080 as expected.
Note that we're simply embracing and extending the early bail-out code
in place for the Mac Mini here. The xorg intel driver uses pci subsystem
device and vendor id for matching, while we're using dmi lookups here.
The MSI addition is courtesy of and tested by Bill Nottingham.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Jesse Barnes [Tue, 5 May 2009 23:03:48 +0000 (16:03 -0700)]
drm/i915: sanity check IER at wait_request time
We might sleep here anyway so I hope an extra uncached read is ok to
add.
In #20896 we found that vbetool clobbers the IER. In KMS mode this is
particularly bad since we don't set the interrupt regs late (in
EnterVT), so we'd fail to get *any* interrupts at all after X started
(since some distros have scripts that call vbetool at X startup
apparently).
So this patch checks IER at wait_request time, and re-enables
interrupts if it's been clobbered. In a proper config this check
should never be triggered.
This is really a distro issue, but having a sanity check is nice, as
long as it doesn't have a real performance hit.
Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Moved the check inside of the sleeping case to avoid perf cost] Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Tue, 12 May 2009 22:27:36 +0000 (15:27 -0700)]
drm/i915: Don't allow binding objects into the last page of the aperture.
This should avoid a class of bugs where the hardware prefetches past the
end of the object, and walks into unallocated memory when the object is
bound to the last page of the aperture.
ext4: Clear the unwritten buffer_head flag after the extent is initialized
The BH_Unwritten flag indicates that the buffer is allocated on disk
but has not been written; that is, the disk was part of a persistent
preallocation area. That flag should only be set when a get_blocks()
function is looking up a inode's logical to physical block mapping.
When ext4_get_blocks_wrap() is called with create=1, the uninitialized
extent is converted into an initialized one, so the BH_Unwritten flag
is no longer appropriate. Hence, we need to make sure the
BH_Unwritten is not left set, since the combination of BH_Mapped and
BH_Unwritten is not allowed; among other things, it will result ext4's
get_block() to be called over and over again during the write_begin
phase of write(2).
Li Hong [Thu, 14 May 2009 17:52:21 +0000 (13:52 -0400)]
Btrfs: remove outdated comment in btrfs_ioctl_resize()
In Li Zefan's commit dae7b665cf6d6e6e733f1c9c16cf55547dd37e33,
a combination call of kmalloc() and copy_from_user() is replaced by
memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more.
Signed-off-by: Li Hong <lihong.hi@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 14 May 2009 17:31:21 +0000 (13:31 -0400)]
Btrfs: remove some WARN_ONs in the IO failure path
These debugging WARN_ONs make too much console noise during regular
IO failures. An IO failure will still generate a number of messages
as we verify checksums etc, but these two are not needed.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 14 May 2009 17:24:30 +0000 (13:24 -0400)]
Btrfs: Don't loop forever on metadata IO failures
When a btrfs metadata read fails, the first thing we try to do is find
a good copy on another mirror of the block. If this fails, read_tree_block()
ends up returning a buffer that isn't up to date.
The btrfs btree reading code was reworked to drop locks and repeat
the search when IO was done, but the changes didn't add a check for failed
reads. The end result was looping forever on buffers that were never
going to become up to date.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 14 May 2009 17:10:02 +0000 (13:10 -0400)]
Btrfs: init inode ordered_data_close flag properly
This flag is used to decide when we need to send a given file through
the ordered code to make sure it is fully written before a transaction
commits. It was not being properly set to zero when the inode was
being setup.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
John Linn [Thu, 14 May 2009 16:23:11 +0000 (10:23 -0600)]
powerpc/virtex: Fix duplicate level irq events.
The interrupt controller was not handling level interrupts correctly
such that duplicate interrupts were happening. This fixes the problem
and adds edge type interrupts which are needed in Xilinx hardware.
Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
David Daney [Tue, 5 May 2009 19:49:47 +0000 (12:49 -0700)]
MIPS: Use force_sig when handling address errors.
When init is started it is SIGNAL_UNKILLABLE. If it were to get an
address error, we would try to send it SIGBUS, but it would be ignored
and the faulting instruction restarted. This results in an endless
loop.
We need to use force_sig() instead so it will actually die and give us
some useful information.
Coly Li [Wed, 22 Apr 2009 19:06:06 +0000 (03:06 +0800)]
MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read()
This patch modifies parameter of octeon_cvmcount_read() from 'void' to
'struct clocksource *cs', which fixes compile warning for incompatible
parameter type.
Signed-off-by: Coly Li <coly.li@suse.de> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
> From: Chris Dearman <chris@mips.com>
> Date: Wed, 19 Sep 2007 00:58:24 +0100
> Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time.
>
> Slightly tacky, but there is a precedent in the sparc archirecture code.
introduces the variable _page_cachable_default, which defaults to zero and.
is used to create the prototype PTE for __kmap_atomic in
arch/mips/mm/init.c:kmap_init before initialization in
arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be
used as the CCA of kmap atomic pages which on many processors is not a
defined CCA value and may result in writes to kmap_atomic pages getting
corrupted. Debugged by Jon Fraser (jfraser@broadcom.com).
The RAMROOT function was a successful but non-portable attempt to append
the root filesystem to the end of the kernel image. The preferred and
portable solution is to use an initramfs instead.
MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx reset
There have been a number of compile problems with the msp71xx configuration
ever since it was included in the linux-mips.org repository. This patch
resolves compilation problems with attempting to reset the board using
non-existent GPIO routines.
This patch has been compile-tested against the current HEAD.
MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup
There have been a number of compile problems with the msp71xx configuration
ever since it was included in the linux-mips.org repository. This patch
resolves the "multiple definition of plat_timer_setup" problem, and creates
the required get_c0_compare_int function.
This patch has been compile-tested against the current HEAD.
projects / karo-tx-linux.git / log