wang di [Sat, 3 Dec 2016 00:53:13 +0000 (19:53 -0500)]
staging: lustre: llog: reset llog bitmap
Once update request fails due to eviction or other failures,
all of update request in the sending list should return fail,
because after the failure, the update log in the following
request will have wrong llog bitmap.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7039
Reviewed-on: http://review.whamcloud.com/16969 Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Sat, 3 Dec 2016 00:53:10 +0000 (19:53 -0500)]
staging: lustre: mdt: race between open and migrate
During intent open, it was found that if the parent has
been migrated to another MDT, it should retry the open
request with the new object, so it needs to keep the
old object in the orphan list, which will be cleanup
during next recovery. Note: if the client still using
the old FID after next recovery, it will return -ENOENT
for the application. Also enqueue the lease lock of
the migrating file, then compare the lease before
migration to make sure no other clients open the file
at the same time.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6475
Reviewed-on: http://review.whamcloud.com/14497 Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sat, 3 Dec 2016 00:53:08 +0000 (19:53 -0500)]
staging: lustre: llite: clear LLIF_DATA_MODIFIED in atomic
This flag should be cleared atomically after the op_data flag
MDS_DATA_MODIFIED is packed. Otherwise, if there exists an
operation to dirty the file again, the state may be missed on
the MDT.
Stop using spin lock lli_lock to protect operations of changing
file flags; using bit operations instead.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6377
Reviewed-on: http://review.whamcloud.com/14100 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandeep Jain [Mon, 5 Dec 2016 03:06:37 +0000 (08:36 +0530)]
staging: lustre: Fix function declaration/definition mismatch
Fixes following Sparse errors.
lprocfs_status.c:1568:5: error: symbol 'lprocfs_wr_root_squash' redeclared with different type...
lprocfs_status.c:1632:5: error: symbol 'lprocfs_wr_nosquash_nids' redeclared with different type...
Jinshan Xiong [Thu, 1 Dec 2016 22:35:32 +0000 (17:35 -0500)]
staging: lustre: osc: Performance tune for LRU
Early launch page LRU work in osc_io_rw_iter_init();
Change the page LRU shrinking policy by OSC attributes;
Delete the contented lock osc_object::oo_seatbelt
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5108
Reviewed-on: http://review.whamcloud.com/10458 Reviewed-by: Bobi Jam <bobijam@hotmail.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Evans [Fri, 2 Dec 2016 19:40:46 +0000 (14:40 -0500)]
staging: lustre: headers: sort headers affected by swab move
It was found if you sort the headers alphabetically
that it reduced patch conflicts. This patch sorts
the headers alphabetically and also place linux
header first, then uapi header and finally the
lustre kernel headers.
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: http://review.whamcloud.com/16339 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Evans [Fri, 2 Dec 2016 19:40:45 +0000 (14:40 -0500)]
staging: lustre: headers: move swab functions to new header files
Create headers for pack_generic.c and llog_swab.c
Reference only where needed. This separates out
the kernel only code from lustre_idl.h that is
an UAPI header.
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: http://review.whamcloud.com/16339 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: android: ashmem: clean up range inline functions
Clean up the code in inline functions that deal with page and
range addresses. Use bool instead of int for boolean return
types and remove superfluous brackets.
The visorchipset.c functionality was moved into the visorbus driver
previously. This patch updates the s-Par firmware postcode values to
reflect this status.
The dgnc driver has no business creating "custom" sysfs files just for a
single tty driver. Combined with the odd way they are created, it's
just a mess, so remove them entirely as I am tired of tripping over them
when doing driver core changes.
James Simmons [Wed, 30 Nov 2016 01:33:33 +0000 (20:33 -0500)]
staging: lustre: libcfs: repair improper unlikely test
The scripts to replace NULL test got confused with the
macro parenthesis so the unlikely test in libcfs_private.h
ended up incorrect. This fixes this error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Wed, 23 Nov 2016 23:01:20 +0000 (18:01 -0500)]
staging: lustre: obd: reserve connection flag OBD_CONNECT_FLAGS2
This is a feature for the client and server to use
obd_connect_flags2 to communicate future feature flags. The
client should set this flag whenever any flags in that field
are requested, and the server should mask unsupported features
from this field (assuming it understands OBD_CONNECT_FLAGS2).
When checking if an OBD_CONNECT2_xxxx feature is supported,
the client/server needs to firstly check if OBD_CONNECT_FLAGS2
is supported, since this field is also beyond the end of the
old obd_connect_data.
Land the connection flags to upstream client earlier for reserving
the slot to avoid potential conflict with others.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7543
Reviewed-on: http://review.whamcloud.com/17647 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Patrick Farrell <paf@cray.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Wed, 23 Nov 2016 23:01:17 +0000 (18:01 -0500)]
staging: lustre: obd: reserve connection flag OBD_CONNECT_SUBTREE
The connection flag OBD_CONNECT_SUBTREE will be used for the
following the patch: LU-28 mounting of filesystem from MDS
http://review.whamcloud.com/5007
Land the connection flags to master earlier for reserving the
slot to avoid potential conflict with others.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7543
Reviewed-on: http://review.whamcloud.com/17644 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Patrick Farrell <paf@cray.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 24 Nov 2016 11:10:39 +0000 (14:10 +0300)]
staging: lustre: lnet: memory corruption in selftest
We want sizeof(struct lstcon_node) but instead we're getting the sizeof
a pointer.
Fixes: 8d78f0f2ba76 ("staging: lustre: lnet: cleanup some of the > 80 line issues") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-4.10d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth set of IIO new device support, features and cleaups for the 4.10 cycle.
Probably the final set before the merge window unless things get significantly
delayed.
New device support
* STM32 ADC core
- new driver. Interesting device with up to 3 ADCs with complex triggering
options that will follow later. Note split into an 'mfd like' core that
handles the interrupt sharing etc between the various instances present and
a per ADC section that is instantiated as many times as needed.
- device tree bindings.
Cleanups and minor fixes
* st_accel
- inline per sensor data as the defines don't add any meaning and make it
much harder to check if a given sensor has the right values.
* hid-magnetometer
- sort out the associations of the associated attributes with the two types.
Ooi, Joyce [Wed, 16 Nov 2016 09:43:09 +0000 (17:43 +0800)]
iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor
There are 2 usage types (Magnetic Flux and Heading data field) for HID
compass sensor, thus the values of offset, scale, and sensitivity should
be separated according to their respective usage type. The changes made
are as below:
1. Hysteresis: A struct hid_sensor_common rot_attributes is created in
struct magn_3d_state to contain the sensitivity for IIO_ROT.
2. Scale: scale_pre_decml and scale_post_decml are separated for IIO_MAGN
and IIO_ROT.
3. Offset: Same as scale, value_offset is separated for IIO_MAGN and
IIO_ROT.
For sensitivity, HID_USAGE_SENSOR_ORIENT_MAGN_FLUX and
HID_USAGE_SENSOR_ORIENT_MAGN_HEADING are used for sensivitity fields based
on the HID Sensor Usages specifications. Hence, these changes are added on
the sensitivity field.
Dan Carpenter [Thu, 24 Nov 2016 13:38:07 +0000 (16:38 +0300)]
iio: tsl2583: make array large enough
This array is supposed to have 10 elements. Smatch complains that with
the current code we can have n == max_ints and read beyond the end of
the array.
Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
David Kershner [Mon, 21 Nov 2016 17:15:52 +0000 (12:15 -0500)]
staging: unisys: visorbus: return EAGAIN when empty
It really isn't an error when you call visorchannel_signalremove and
there isn't anything in the queue. Just means that the IOSP didn't
process anything since the last time you checked. Just inform the
caller that it is empty by returning -EAGAIN.
Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Erik Arfvidson [Mon, 21 Nov 2016 17:15:41 +0000 (12:15 -0500)]
staging: unisys: include: fix pound defines
The purpose of this patch is to add style consistency and
beautify the entire file. This patch removes unused pound defines
and cleans up spacing and tabbing of pound defines.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The purpose of this patch is to add style consistency and beautify the
entire file.
Grammar:
Uppercased beginning of new sentences/paragraphs
Missing ' and .
Fixed several comments using prefix phrase "as is in" to "as in"
Standard Grammar
Comments:
Fixed comments to follow the multiline styling
All comments are now either same line or above variable/definitions
Removed nested slash-star comments
Removed a random comment left by accident
Aligned star comments
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>