iio:max1361: Use default triggered buffer setup ops
The max1361 driver uses the same callbacks as the triggered buffer default
buffer setup ops, so just remove the max1361 specific ops and let it use the
default ops.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: iio_push_to_buffers(): Change type of 'data' to const void *
Change the type of the 'data' parameter for iio_push_to_buffers() from 'u8 *' to
'const void *'. Drivers typically use the correct type (e.g. __be16 *) for their
data buffer. When passing the buffer to iio_push_to_buffers() it needs to be
cast to 'u8 *' for the compiler to not complain (and also having to add __force
if we want to keep sparse happy as well). Since the buffer implementation should
not care about the data layout (except the size of one sample) using a void
pointer is the correct thing to do. Also make it const as the buffer
implementations are not supposed to modify it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
These two additional info_mask bitmaps should allow all 'standard'
numeric attributes to be handled using the read_raw and write_raw
callbacks. Whilst this should reduce code, the more important element
is that this makes these values easily accessible to in kernel users
of IIO devices.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
We can skip having to loop through all the device's buffers to see if a certain
buffer is active, if we let the buffer's list head point to itself when the
buffer is inactive.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
IIO uses anon_inode_get() to allocate file descriptors as part
of its ioctls. But those ioctls are lacking a flag argument
allowing userspace to choose options for the newly opened file
descriptor.
In such case it's advised to use O_CLOEXEC by default so that
userspace is allowed to choose, without race, if the file descriptor
is going to be inherited across exec().
KVM usage of anon_inode_getfd() was fixed in a previous patchset [1],
so IIO is the only subsystem using anon_inode_getfd() with a fixed set
of flags not including O_CLOEXEC.
This patch set O_CLOEXEC flag on the event file descriptor created
with anon_inode_getfd() to not leak file descriptors across exec().
Add a new driver for the ambient light/proximity sensor
device. The driver exposes three channels: light_clear
light_ir and proximity. It also supports triggered buffer,
high and low ambient light threshold event and proximity
detection events.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jacek Anaszewski [Wed, 21 Aug 2013 15:06:00 +0000 (16:06 +0100)]
DT: Add documentation for gp2ap020a00f sensor
This patch adds device tree binding documentation
for the gp2ap020a00f proximity/als sensor.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Sat, 14 Sep 2013 19:38:00 +0000 (20:38 +0100)]
iio: Add tcs3472 color light sensor driver
chip has four 16-bit channels for red, green, blue, clear color
intensity; driver supports the TCS3x7x family of devices and was
tested with a TCS34725 chip; further information here:
http://www.ams.com/eng/Products/Light-Sensors/Color-Sensor/TCS34725
v2 (thanks to Jonathan Cameron):
* drop dynamic buffer allocation, buffer is in tcs3472_data
* limit sysfs output to PAGE_SIZE
* check val2 == 0 when writing CALIBSCALE
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jon Brenner <jon.brenner@ams.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lee Jones [Tue, 10 Sep 2013 12:49:00 +0000 (13:49 +0100)]
iio: pressure-core: st: Allow for number of channels to vary
At the moment the number of channels specified is dictated by the first
sensor supported by the driver. As we add support for more sensors this
is likely to vary. Instead of using the ARRAY_SIZE() of the LPS331AP's
channel specifier we'll use a new adaptable 'struct st_sensors' element
instead.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lee Jones [Tue, 10 Sep 2013 12:49:00 +0000 (13:49 +0100)]
iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor
Due to the MACRO used, the task of reading, understanding and maintaining
the LPS331AP's channel descriptor is substantially difficult. This patch
is based on the view that it's better to have easy to read, maintainable
code than to save a few lines here and there. For that reason we're
expanding the array so initialisation is completed in full.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lee Jones [Tue, 10 Sep 2013 12:49:00 +0000 (13:49 +0100)]
iio: sensors-core: st: Allow full-scale to be an optional feature
Some chips either don't support it or fail to provide adequate documentation,
so sometimes it's impossible to enable the feature even if it is supported.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Sun, 8 Sep 2013 15:20:00 +0000 (16:20 +0100)]
iio: Add tsl4531 ambient light sensor driver
driver for the TSL4531 family of 16-bit I2C ambient light
sensors; information is here:
http://www.ams.com/eng/Products/Light-Sensors/Ambient-Light-Sensor-ALS/TSL45315
the chip offers simple lux output
v3 (thanks Lars-Peter Clausen):
* add mutex to when updating integration time
* fix chip ID checking
* code cleanups
v2:
* rename to tsl4351
* use INT_TIME
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald [Sun, 8 Sep 2013 15:20:00 +0000 (16:20 +0100)]
iio: Add INT_TIME (integration time) channel info attribute
Integration time is in seconds; it controls the measurement
time and influences the gain of a sensor.
There are two typical ways that scaling is implemented in a device:
1) input amplifier,
2) reference to the ADC is changed.
These both result in the accuracy of the ADC varying (by applying its
sampling over a more relevant range).
Integration time is a way of dealing with noise inherent in the analog
sensor itself. In the case of a light sensor, a mixture of photon noise
and device specific noise. Photon noise is dealt with by either improving
the efficiency of the sensor, (more photons actually captured) which is not
easily varied dynamically, or by integrating the measurement over a longer
time period. Note that this can also be thought of as an averaging of a
number of individual samples and is infact sometimes implemented this way.
Altering integration time implies that the duration of a measurement changes,
a fact the device's user may be interested in.
Hence it makes sense to distinguish between integration time and simple
scale. In some devices both types of control are present and whilst they
will have similar effects on the amplitude of the reading, their effect
on the noise of the measurements will differ considerably.
Used by adjd_s311, tsl4531, tcs3472
The following drivers have similar controls (and could be adapted):
* tsl2563 (integration time is controlled via CALIBSCALE among other things)
* tsl2583 (has integration_time device_attr, but driver doesn't use channels yet)
* tsl2x7x (has integration_time attr)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jon Brenner <jon.brenner@ams.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jingoo Han [Tue, 20 Aug 2013 02:31:00 +0000 (03:31 +0100)]
staging: iio: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.
Previously, there were only strict_strtol(), strict_strtoul(),
strict_strtoull(), and strict_strtoll(). Thus, when converting
to the variables, only long, unsigned long, unsigned long long,
and long long can be used.
However, kstrto*() provides various functions handling all types
of variables. Therefore, the types of variables can be changed
properly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
staging: dwc2: make dwc2_core_params documentation more complete
Some of the defaults were missing or unclear. In particular, I suspect
the defaults were documented assuming there were still module parameters
and taking the default module parameters into account. Now, the defaults
are the values that will get chosen when the params passed to
dwc2_hcd_init are all -1.
staging: dwc2: validate the value for phy_utmi_width
The HWCFG4 register stores the supported utmi width values (8, 16 or
both). This commit reads that value and validates the configured value
against that.
If no (valid) value is given, the parameter defaulted to 8 bits
previously. However, the documentation for dwc2_core_params_struct
suggests that the default should have been 16. Also, the pci bindings
explicitely set the value to 16, so this commit changes the default to
16 bits (if supported, 8 bits otherwise).
With the default changed, the value set in pci.c is changed to -1 to
make it autodetected as well.
staging: dwc2: interpret all hwcfg and related register at init time
Before, the hwcfg registers were read at device init time, but
interpreted at various parts in the code. This commit unpacks the hwcfg
register values into a struct with properly labeled variables at init
time, which makes all the other code using these values more consise and
easier to read. Some values that were previously stored in the hsotg
struct are now moved into this new struct as well.
In addition to the hwcfg registers, the contents of some fifo size
registers are also unpacked. The hwcfg registers are read-only, so they
can be safely stored. The fifo size registers are read-write registers,
but their power-on values are significant: they give the maximum depth
of the fifo they describe.
This commit mostly moves code, but also attempts to simplify some
expressions from (val >> shift) & (mask >> shift) to
(val & mask) >> shift.
Finally, all of the parameters read from the hardware are debug printed
after unpacking them, so a bunch of debug prints can be removed from
other places.
Bits 16-31 are reserved, so the old code just reads the whole register to
get bits 0-15, assuming the reserved bits would be 0 (which seems true
on current hardware, but who knows...).
This commit properly masks out the reserved bits when reading and
doesn't touch the reserved bits while writing.
For calculating FIFO offsets, the sizes of preceding fifos need to be
known. For filling the GDFIFOCFG register, these fifo sizes were read
from hardware registers. However, these values were written to these
registers just a few lines before, so we can just use the values written
instead.
For some reason, the value of the HPTXFSIZ register was built in the
ptxfsiz variable, while there was also a hptxfsiz variable availble.
Better just use that and remove the (now unused) ptxfsiz variable.
staging: dwc2: simplify debug output in dwc_hc_init
The value of the hcchar register is built from individual values by
shifting and masking. Before, the debug output extracted the individual
values out of the complete hcchar register again by doing the reverse.
This commit makes the debug output use the original values instead.
One debug message got removed, since it would always print a fixed value
of zero.
This line extracted the available queue space without properly shifting
it. Since the code only cared wether it was zero or not, it worked as
expected without the shift, but adding shift makes the code cleaner.
While we're here, store the result in a helper variable that was already
declared to increase readability a bit more.
staging: dwc2: unshift non-bool register value constants
Various register fields wider than one bit have constants defined for
their value. Previously, these registers would define the values as they
appear in the register, so shifted to the right to the position the
value appears in the register.
This commit changes those constants to their natural values (e.g, 0, 1,
2, etc.), as they are after shifting the register value to the right.
This also changes all relevant code to shift the values before comparing
them with constants.
This has the advantage that the values can be stored in smaller
variables (now they always require a u32) and makes the handling of
these values more consistent with other register fields that represent
natural numbers instead of enumerations (e.g., number of host channels).
staging: dwc2: fix off-by-one in check for max_packet_count parameter
Previously, the max_packet_count could be set to 1 << x, where x is the
number of bits available (width + 4 in the code). Since 1 << x requires
x + 1 bits to represent, this will not work. The real maximum value is
(1 << x) - 1. This value is already used the default when the set value
is invalid, but the upper limit for the set value was off-by-one.
This change makes the check the same as the one for max_transfer_size,
which was already correct.
staging: dwc2: remove specific fifo size constants
A generic set of FIFOSIZE_* constants is defined which applies to all
fifo size and offset registers. It is already used for both the
GNPTXFSIZ and HPTXFSIZ registers, but it applies to DPTXFSIZN as well.
Some of these also had specific constants defined. This patch removes
the specific constants and documents to use the generic constants.
Note that the removed constants weren't actually used. Instead, most of
the related code uses hardcoded masks and shifts. But given that
subsequent patches will be moving that code around and introducing the
constants in the process, this patch leaves those untouched.
Also note that the GRXFSIZ register also contains a fifo size, but
there is no corresponding start address register (it is always the first
fifo in memory), the layout of the GRXFSIZ register is different and
cannot use the same constants.
Larry Finger [Thu, 29 Aug 2013 02:12:25 +0000 (21:12 -0500)]
staging: r8188eu: Fix compiler warnings in os_dep/ioctl_linux.c
The 0-DAY kernel build testing backend reports the following compiler
warnings not shown on my compiler version/options:
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_efuse_get':
>> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5836:65: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
sprintf(extra, "%s%02X ", extra, pEfuseHal->fakeEfuseInitMap[i+j]);
^
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5830:3: note: containing loop
for (i = 0; i < EFUSE_MAP_SIZE; i += 16) {
^
>> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6042:69: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
sprintf(extra, "%s %02X", extra, pEfuseHal->fakeEfuseModifiedMap[i+j]);
^
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6036:3: note: containing loop
for (i = 0; i < EFUSE_MAP_SIZE; i += 16) {
^
The problem is due to improper settings for some of the EFUSE_XXX defines such that
EFUSE_MAP_SIZE was larger than the sizes of the marked arrays. Thanks to
Fengguang Wu for helping me understand the root cause.
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_cleanup_module’:
drivers/staging/dgap/dgap_driver.c:423: error: implicit declaration of function ‘kfree’
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_driver_kzmalloc’:
drivers/staging/dgap/dgap_driver.c:940: error: implicit declaration of function ‘kmalloc’
drivers/staging/dgap/dgap_driver.c:940: warning: initialization makes pointer from integer without a cast
Merge tag 'iio-for-3.12c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of new drivers, cleanups and features for IIO in the 3.12 cycle.
New drivers
1) Bosh BMA180 accelerometer + a new sysfs abi element, power_mode to
allow for device that trade off accuracy and power usage.
Cleanups
1) Another lot of devm_iio_device_alloc patches
2) An code ordering bug in the twl6030 driver introduced earlier in this
cycle.
New features
1) at91 adc driver rework to support a wider range of parts and drop
the necessity for some of the current device tree elements. This is
a precursor to introducing input support which is still under review.
staging: vt6656: baseband.h re: baseband.c:877:26: sparse: incorrect type in assignment (different base types)
sparse warnings: (new ones prefixed by >>)
...
>> drivers/staging/vt6656/baseband.c:877:26: sparse: incorrect type in assignment (different base types)
drivers/staging/vt6656/baseband.c:877:26: expected unsigned short [unsigned] [usertype] len
drivers/staging/vt6656/baseband.c:877:26: got restricted __le16 [usertype] <noident>
>> drivers/staging/vt6656/baseband.c:880:26: sparse: incorrect type in assignment (different base types)
drivers/staging/vt6656/baseband.c:880:26: expected unsigned short [unsigned] [usertype] len
drivers/staging/vt6656/baseband.c:880:26: got restricted __le16 [usertype] <noident>
projects / karo-tx-linux.git / log