Merge tag 'iio-for-4.10c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of IIO new device support, features and cleanup for the 4.10 cycle.
Includes Peter Rosin's interesting drivers for a comparator. First complex
use we have had with an analog front end made from discrete components.
Brian Masney's work on moving the tsl2583 driver out of staging also
feature extensively!
New Drivers
* DAC based on a digital potentiometer
- New driver for the use of a dpot as a DAC. Includes bindings and Axentia
entry in vendor prefixes.
* Envelope detector baed on DAC and a comparator including device tree
bindings.
Staging Graduation
* tsl2583.
Core new features
- Core provision for _available attributes. This one had been stalled for
a long time until Peter picked it up and ran with it!
- In kernel interface helpers to retrieve available info from channels.
Driver new features
* mcp4531
- Add range of available raw values (used for the dpot dac driver).
Driver cleanups and fixes for issues introduced
* ad7766
- Testing the wrong variable following devm_regulator_bulk_get introduced
with the driver earlier in this cycle.
* ad9832
- Fix a wrong ordering in the probe introduced in the previous set of
patches. A use before allocation bug.
* cros_ec_sensors
- Testing for an error in a u8 will never work.
* mpu3050
- Remove duplicate initializer for the module owner.
- Add missing i2c dependency.
- Inform the i2c mux core how it is used - step one in implifying device
tree bindings.
* st-sensors
- Get rid of large number of uninformative defines in favour of putting the
constants where they are relevant. It is clear what they are from where
they are used.
* tsl2583
- Fix unused function warning when CONFIG_PM disabled and remove the
ifdefs in favour of __maybe_unused.
- Refactor taos_chip_on to only read relevant registers.
- Make sure calibscale and integration time are being set.
- Verify chip is in ready to be used before calibration.
- Remove some repeated checks for chip status (it's protected by a mutex
so can't change until it's released)
- Change current state storage from a tristate enum to a boolean seeing as
only two values are actually used now.
- Drop a redundant write to the control regiser in taos_probe (it's a noop)
- Drop the FSF mailing address.
- Clean up logging to not use hard coded function names (use __func__
instead).
- Cleanup up variable and function name prefixes.
- Alignment of #define fixes.
- Fix comparison between signed and unsigned integer warnings.
- Add some newlines in favour of readability.
- Combine the two sysfs ABI docs that somehow ended up in different places.
- Fix multiline comment syntax.
- Move a code block to inside an else statement as it makes more sense there.
- Change tsl2583_als_calibrate to return 0 rather than a value nothing
reads.
- Drop some pointless brackets
- Don't assume 32bit unsigned int.
- Change to a per device instance lux table.
- Add missing tsl2583 to the list of supported devices in the intro comments.
- Improve commment on clearing of interrupts.
- Drop some uninformative comments.
- Drop a memset call that doesn't do anything useful any more.
- Don't initialize some return variables that are always set.
- Add Brian Masney as a module author after all these changes.
Ian Abbott [Mon, 14 Nov 2016 20:16:23 +0000 (20:16 +0000)]
staging: comedi: ni_mio_common: remove variable 'dl' in ni_ai_insn_read()
In `ni_ai_insn_read()`, local variable `dl` is declared as `unsigned
long`, but `unsigned int` will do. Get rid of it and use local variable
`d` instead. (That used to be `unsigned short`, but has been `unsigned
int` since kernel version 3.18.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 14 Nov 2016 20:16:22 +0000 (20:16 +0000)]
staging: comedi: ni_mio_common: fix E series ni_ai_insn_read() data
Commit 0557344e2149 ("staging: comedi: ni_mio_common: fix local var for
32-bit read") changed the type of local variable `d` from `unsigned
short` to `unsigned int` to fix a bug introduced in
commit 9c340ac934db ("staging: comedi: ni_stc.h: add read/write
callbacks to struct ni_private") when reading AI data for NI PCI-6110
and PCI-6111 cards. Unfortunately, other parts of the function rely on
the variable being `unsigned short` when an offset value in local
variable `signbits` is added to `d` before writing the value to the
`data` array:
d += signbits;
data[n] = d;
The `signbits` variable will be non-zero in bipolar mode, and is used to
convert the hardware's 2's complement, 16-bit numbers to Comedi's
straight binary sample format (with 0 representing the most negative
voltage). This breaks because `d` is now 32 bits wide instead of 16
bits wide, so after the addition of `signbits`, `data[n]` ends up being
set to values above 65536 for negative voltages. This affects all
supported "E series" cards except PCI-6143 (and PXI-6143). Fix it by
ANDing the value written to the `data[n]` with the mask 0xffff.
Fixes: 0557344e2149 ("staging: comedi: ni_mio_common: fix local var for 32-bit read") Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org>
----
Needs backporting to stable kernels 3.18 onwards. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 14 Nov 2016 20:16:21 +0000 (20:16 +0000)]
staging: comedi: ni_mio_common: fix M Series ni_ai_insn_read() data mask
For NI M Series cards, the Comedi `insn_read` handler for the AI
subdevice is broken due to ANDing the value read from the AI FIFO data
register with an incorrect mask. The incorrect mask clears all but the
most significant bit of the sample data. It should preserve all the
sample data bits. Correct it.
Fixes: 817144ae7fda ("staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'") Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiva Kerdel [Tue, 15 Nov 2016 08:30:03 +0000 (09:30 +0100)]
Staging: fsl-mc: include: mc: Kernel type 'int' preferred over 's16'
After following a discussion about the used integer types Dan Carpenter
pointed out that 'int' types should be used over the current change to
's16'. The reason for this is to have an upper bound instead of overflowing
the 's16' so we could still remove devices.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl> Suggested-by: Stuart Yoder <stuart.yoder@nxp.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregoire Pichon [Thu, 10 Nov 2016 15:51:13 +0000 (10:51 -0500)]
staging: lustre: mdc: manage number of modify RPCs in flight
This patch is the main client part of a new feature that supports
multiple modify metadata RPCs in parallel. Its goal is to improve
metadata operations performance of a single client, while maintening
the consistency of MDT reply reconstruction and MDT recovery
mechanisms.
It allows to manage the number of modify RPCs in flight within
the client obd structure and to assign a virtual index (the tag) to
each modify RPC to help server side cleaning of reply data.
The mdc component uses this feature to send multiple modify RPCs
in parallel.
Signed-off-by: Gregoire Pichon <gregoire.pichon@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5319
Reviewed-on: http://review.whamcloud.com/14374 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henri Doreau [Thu, 10 Nov 2016 17:30:31 +0000 (12:30 -0500)]
staging: lustre: hsm: Use file lease to implement migration
Implement non-blocking migration based on exclusive open instead of
group lock. Implemented exclusive close operation to atomically put
a lease, swap two layouts and close a file. This allows race-free
migrations.
Make the caller responsible for retrying on failure (EBUSY, EAGAIN)
in non-blocking mode.
In blocking mode, allow applications to trigger layout swaps using a
grouplock they already own, to prevent race conditions between the
actual data copy and the layout swap. Updated lfs accordingly. File
leases are also taken in blocking mode, so that lfs migrate can issue
a warning if an application attempts to open a file that is being
migrated and gets blocked.
Timestamps (atime/mtime) are set from userland, after the layout swap
is performed, to prevent conflicts with the grouplock.
lli_trunc_sem is taken/released in the vvp_io layer, under the DLM
lock. This re-ordering fixes the original issue between truncate and
migrate.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr> Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4840
Reviewed-on: http://review.whamcloud.com/10013 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: frank zago <fzago@cray.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Thu, 10 Nov 2016 17:31:04 +0000 (12:31 -0500)]
staging: lustre: lnet: add offset for selftest brw
In current lnet selftest, both client and server side bulk have
no offset and we can only test page aligned IO, this patch changed
this:
- user can set brw offset by lst add_test ... brw off=OFFSET ...
- offset is only effective on client side so far
- to simply implementation, offset needs to be eight bytes aligned
wang di [Thu, 10 Nov 2016 17:30:38 +0000 (12:30 -0500)]
staging: lustre: lmv: lock necessary part of lmv_add_target
Release lmv_init_mutex once the new target is added
into lmv_tgt_desc, so lmv_obd_connect will not be
serialized.
New target should be allowed to added to fld client
lists, so FLD can always choose new added target to
do the FLD lookup request, and also remove some noise
error messages in this process.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6713
Reviewed-on: http://review.whamcloud.com/15269 Reviewed-by: Niu Yawei <yawei.niu@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Thu, 10 Nov 2016 17:30:33 +0000 (12:30 -0500)]
staging: lustre: ptlrpc: mbits is sent within ptlrpc_body
ptlrpc is using rq_xid as matchbits of bulk data, which means it
has to change rq_xid for bulk resend to avoid several bulk data
landing into the same buffer from different resends.
This patch uses one of reserved __u64 of ptlrpc_body to transfer
mbits to peer, matchbits is now separated from xid. With this change,
ptlrpc can keep rq_xid unchanged on resend, it only updates matchbits
for bulk data.
This protocol change is only applied if both sides of connection have
OBD_CONNECT_BULK_MBITS, otherwise, ptlrpc still uses old approach and
update xid while resending bulk.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3534
Reviewed-on: http://review.whamcloud.com/15421 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Thu, 10 Nov 2016 17:30:32 +0000 (12:30 -0500)]
staging: lustre: obd: rename obd_unpackmd() to md_unpackmd()
obd_unpackmd() is only implemented by LMV so move it from OBD
operations to OBD MD operations and update the prototype to reflex
the actual usage. Remove the unused function obd_free_memmd().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5814 Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13737 Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aditya Pandit [Thu, 10 Nov 2016 17:30:45 +0000 (12:30 -0500)]
staging: lustre: llite: tar restore fails for HSM released files.
If you create a file, archive and release it, it keeps only a
link and all information in xattr. If you tar the file
with --xattr you will store the same striping information and link
information in the tar. If you delete the file, the file and archive
state does not make sense. Now if you restore the file using tar
with xattr having the RELEASED flag turned on, then it is not correct
because this is a new file. Hence ignoring the HSM xattr and masking
out the "RELEASED" flag for the files, which are not archived.
Signed-off-by: Aditya Pandit <panditadityashreesh@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6214
Reviewed-on: http://review.whamcloud.com/16060 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: frank zago <fzago@cray.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 10 Nov 2016 17:30:40 +0000 (12:30 -0500)]
staging: lustre: lmv: revalidate the dentry for striped dir
If there are bad stripe during striped dir revalidation,
most likely due the race between close(unlink) and
getattr, then let's revalidate the dentry, instead of
return error, like normal directory.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6831
Reviewed-on: http://review.whamcloud.com/15720
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7078
Reviewed-on: http://review.whamcloud.com/16382 Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 10 Nov 2016 17:30:43 +0000 (12:30 -0500)]
staging: lustre: llite: lookup master inode by ilookup5_nowait
Do not lookup master inode by ilookup5, instead it should
use ilookup5_nowait, otherwise it will cause dead lock,
1. Client1 send chmod req to the MDT0, then on MDT0, it
enqueues master and all of its slaves lock, (mdt_attr_set()
->mdt_lock_slaves()), after gets master and stripe0 lock,
it will send the enqueue request(for stripe1) to MDT1, then
MDT1 finds the lock has been granted to client2. Then MDT1
sends blocking ast to client2.
2. At the same time, client2 tries to unlink the striped
dir (rm -rf striped_dir), and during lookup, it will hold
the master inode of the striped directory, whose inode state
is NEW, then tries to revalidate all of its slaves,
(ll_prep_inode()->ll_iget()->ll_read_inode2()->
ll_update_inode().). And it will be blocked on the server
side because of 1.
3. Then the client get the blocking_ast request, cancel the
lock, but being blocked by ilookup5 in ll_md_blocking_ast(),
because the inode state is still NEW.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5344
Reviewed-on: http://review.whamcloud.com/16066 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Boyko [Thu, 10 Nov 2016 17:30:41 +0000 (12:30 -0500)]
staging: lustre: ptlrpc: race at req processing
Fix: 5c689e689baa ("staging/lustre/ptlrpc: race at req processing")
decreased the race window, but does not remove it. Disable rq_resend
right after MSG_REPLAY flag set. Import lock protects two threads
from race between set/clear MSG_REPLAY and rq_resend flags.
Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5554
Xyratex-bug-id: MRP-1888
Reviewed-on: http://review.whamcloud.com/10735 Reviewed-by: Niu Yawei <yawei.niu@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 10 Nov 2016 17:30:52 +0000 (12:30 -0500)]
staging: lustre: llite: clear dir stripe md in ll_iget
If ll_iget fails during inode initialization, especially
during striped directory lookup after creation failed,
then it should clear stripe MD before make_bad_inode(),
because make_bad_inode() will reset the i_mode, which
can cause ll_clear_inode() skip freeing those stripe MD.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7230
Reviewed-on: http://review.whamcloud.com/16677 Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 10 Nov 2016 17:30:39 +0000 (12:30 -0500)]
staging: lustre: mgc: IR log failure should not stop mount
If clients or other targets can not get IR config lock
or lock, the mount should continue, instead of failing.
Because timeout mechanism will handle the recovery anyway.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6906
Reviewed-on: http://review.whamcloud.com/15728 Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hongchao Zhang [Thu, 10 Nov 2016 17:30:57 +0000 (12:30 -0500)]
staging: lustre: ptlrpc: reset imp_replay_cursor
At client side, the replay cursor using to speed up the lookup
of committed open requests in its obd_import should be resetted
for normal connection (not reconnection) during recovery.
Hiroya Nozaki [Thu, 10 Nov 2016 17:31:00 +0000 (12:31 -0500)]
staging: lustre: llite: ll_write_begin/end not passing on errors
Because of a implementation of generic_perform_write(), write(2)
may return 0 with no errno even if EDQUOT or ENOSPC actually
happened in it. This patch fixes the issue with setting a proper
errno to ci_result.
Signed-off-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6732
Reviewed-on: http://review.whamcloud.com/15302 Reviewed-by: Bobi Jam <bobijam@hotmail.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Thu, 10 Nov 2016 17:30:56 +0000 (12:30 -0500)]
staging: lustre: mdc: remove console spew from mdc_ioc_fid2path
In some cases with a very long pathname, such as with sanity.sh
test_154c, mdc_ioc_fid2path() would spew long debug messages to
the log, because libcfs_debug_vmsg2() refuses to log messages over
one page in size.
Truncate the debug message to only log the last 512 characters
of the pathname, which is sufficient for most debugging, saves a
bit of space in the debug log, and will prevent the debug logging
from printing to the console in the first place.
John L. Hammond [Thu, 10 Nov 2016 17:31:03 +0000 (12:31 -0500)]
staging: lustre: hsm: prevent migration of HSM archived files
The reference copytool cannot handle migration of HSM archive
files. In the MDT migration path check for HSM attributes and fail if
they are present. In the LMV layer allow creation of volatile files
with any MDT index. Add a test to sanity-hsm to ensure that attempting
to migrate an HSM archive file is handled safely.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6866
Reviewed-on: http://review.whamcloud.com/17511 Reviewed-by: wangdi <di.wang@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: llite: support SELinux context labelling
SELinux contexts are applied by the kernel if mount options are
not binary. As we don't use any binary mount options in Lustre,
remove the binary mount option flag.
Signed-off-by: Andrew Wellington <andrew.wellington@anu.edu.au> Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6950
Reviewed-on: http://review.whamcloud.com/15840 Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Thu, 10 Nov 2016 17:30:55 +0000 (12:30 -0500)]
staging: lustre: osc: Do not merge extents with partial pages
After range lock is introduced to Lustre, it's possible for
multiple threads to submit osc_extents with partial pages, and
finally I/O engine may try to merge these extents, which will
end up with assert in osc_build_rpc().
In this patch, osc_extent::oe_no_merge is introduced, and this flag
is set if osc_extent submitted via osc_io_submit() includes partial
pages. This flag is used by I/O engine to stop merging this kind
of extents.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6666
Reviewed-on: http://review.whamcloud.com/15468 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Patrick Farrell <paf@cray.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 10 Nov 2016 15:21:20 +0000 (16:21 +0100)]
staging: lustre: ldlm: pl_recalc time handling is wrong
James Simmons reports:
> The ldlm_pool field pl_recalc_time is set to the current
> monotonic clock value but the interval period is calculated
> with the wall clock. This means the interval period will
> always be far larger than the pl_recalc_period, which is
> just a small interval time period. The correct thing to
> do is to use monotomic clock current value instead of the
> wall clocks value when calculating recalc_interval_sec.
This broke when I converted the 32-bit get_seconds() into
ktime_get_{real_,}seconds() inconsistently. Either
one of those two would have worked, but mixing them
does not.
Staying with the original intention of the patch, this
changes the ktime_get_seconds() calls into ktime_get_real_seconds(),
using real time instead of mononic time.
Cc: stable@vger.kernel.org # v4.4+ Fixes: 8f83409cf238 ("staging/lustre: use 64-bit time for pl_recalc") Reported-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Thu, 10 Nov 2016 17:30:34 +0000 (12:30 -0500)]
staging: lustre: lov: init LOV stripe type beforehand
When lu_object_alloc() reaches to LOV object init, we need initialize
its stripe type beforehand, so that if something wrong in the conf
buffer, the object chain need to be traversed to free what has been
allocated, with LOV object type be set as LLT_EMPTY, and when the LOV
part is reached, it won't panic without knowing what stripe type it
is.
This patch also improves debug messages in lsm_unpackmd_common(), and
does not return error if the LOV device is still processing config
log while trying to verify a layout buffer.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6744
Reviewed-on: http://review.whamcloud.com/15362 Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c:65:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:193:39-40: WARNING: Use ARRAY_SIZE
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element
Semantic patch information:
This makes an effort to find cases where ARRAY_SIZE can be used such as
where there is a division of sizeof the array by the sizeof its first
element or by any indexed element or the element type. It replaces the
division of the two sizeofs by ARRAY_SIZE.
Linus Torvalds [Sun, 13 Nov 2016 18:28:53 +0000 (10:28 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes. There are a couple pending x86 patches but they'll have to
wait for next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
KVM: arm/arm64: vgic: Prevent access to invalid SPIs
arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
Linus Torvalds [Sun, 13 Nov 2016 18:26:05 +0000 (10:26 -0800)]
Merge branch 'media-fixes' (patches from Mauro)
Merge media fixes from Mauro Carvalho Chehab:
"This contains two patches fixing problems with my patch series meant
to make USB drivers to work again after the DMA on stack changes.
The last patch on this series is actually not related to DMA on stack.
It solves a longstanding bug affecting module unload, causing
module_put() to be called twice. It was reported by the user who
reported and tested the issues with the gp8psk driver with the DMA
fixup patches. As we're late at -rc cycle, maybe you prefer to not
apply it right now. If this is the case, I'll add to the pile of
patches for 4.10.
Exceptionally this time, I'm sending the patches via e-mail, because
I'm on another trip, and won't be able to use the usual procedure
until Monday. Also, it is only three patches, and you followed already
the discussions about the first one"
Linus Torvalds [Sun, 13 Nov 2016 18:24:08 +0000 (10:24 -0800)]
Merge tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are three small driver fixes for some reported issues for
4.9-rc5.
One for the hyper-v subsystem, fixing up a naming issue that showed up
in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
resolving a reported regression.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ppdev: fix double-free of pp->pdev->name
vmbus: make sysfs names consistent with PCI
mei: bus: fix received data size check in NFC fixup
Linus Torvalds [Sun, 13 Nov 2016 18:22:07 +0000 (10:22 -0800)]
Merge tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver core fixes for 4.9-rc5.
The first resolves an issue with some drivers not liking to be unbound
and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
solves some reported problems with graphics and storage drivers. The
other resolves a smatch error with the 4.9-rc1 driver core changes
around this feature.
Both have been in linux-next with no reported issues"
* tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: fix smatch warning on dev->bus check
driver core: skip removal test for non-removable drivers
Linus Torvalds [Sun, 13 Nov 2016 18:13:33 +0000 (10:13 -0800)]
Merge tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Grek KH:
"Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the
others, have been in linux-next for a while with no reported issues"
* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: maxim_thermocouple: detect invalid storage size in read()
staging: nvec: remove managed resource from PS2 driver
Revert "staging: nvec: ps2: change serio type to passthrough"
drivers: staging: nvec: remove bogus reset command for PS/2 interface
staging: greybus: arche-platform: fix device reference leak
staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
staging: sm750fb: Fix bugs introduced by early commits
iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
iio: st_sensors: fix scale configuration for h3lis331dl
staging: iio: ad5933: avoid uninitialized variable in error case
Linus Torvalds [Sun, 13 Nov 2016 18:09:04 +0000 (10:09 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull more block fixes from Jens Axboe:
"Since I mistakenly left out the lightnvm regression fix yesterday and
the aoeblk seems adequately tested at this point, might as well send
out another pull to make -rc5"
* 'for-linus' of git://git.kernel.dk/linux-block:
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
Linus Torvalds [Sun, 13 Nov 2016 18:07:08 +0000 (10:07 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The megaraid_sas patch in here fixes a major regression in the last
fix set that made all megaraid_sas cards unusable. It turns out no-one
had actually tested such an "obvious" fix, sigh. The fix for the fix
has been tested ...
The next most serious is the vmw_pvscsi abort problem which basically
means that aborts don't work on the vmware paravirt devices and error
handling always escalates to reset.
The rest are an assortment of missed reference counting in certain
paths and corner case bugs that show up on some architectures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove
scsi: qla2xxx: do not queue commands when unloading
scsi: libcxgbi: fix incorrect DDP resource cleanup
scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
scsi: scsi_dh_alua: Fix a reference counting bug
scsi: vmw_pvscsi: return SUCCESS for successful command aborts
scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()
Linus Torvalds [Sun, 13 Nov 2016 18:04:55 +0000 (10:04 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The typical collection of minor bug fixes in clk drivers. We don't
have anything in the core framework here, just driver fixes.
There's a boot fix for Samsung devices and a safety measure for qoriq
to prevent CPUs from running too fast. There's also a fix for i.MX6Q
to properly handle audio clock rates. We also have some "that's
obviously wrong" fixes like bad NULL pointer checks in the MPP driver
and a poor usage of __pa in the xgene clk driver that are fixed here"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
clk: qoriq: Don't allow CPU clocks higher than starting value
clk: imx: fix integer overflow in AV PLL round rate
clk: xgene: Don't call __pa on ioremaped address
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
clk: rockchip: don't return NULL when failing to register ddrclk branch
The DVB binding schema at the DVB core assumes that the frontend is a
separate driver. Faling to do that causes OOPS when the module is
removed, as it tries to do a symbol_put_addr on an internal symbol,
causing craches like:
Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the
usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op().
Fix it.
From Derek's email:
"Fix confirmed using 2 different Skywalker models with
HD mpeg4, SD mpeg2."
Suggested-by: Johannes Stezenbach <js@linuxtv.org> Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") Tested-by: Derek <user.vdr@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The entries in the lux table (als_device_lux) can be updated via sysfs
through the function in_illuminance_lux_table_store(). The last row in
the table must be terminated with values that are zero. The sysfs code
already ensures that the last row is all zeros. The call to memset to
clear out the table is not needed so this patch removes the unnecessary
call.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:36 +0000 (13:19 -0500)]
staging: iio: tsl2583: clarified comment about clearing interrupts
The comment that describes the code that clears the interrupt bit was
vague and didn't provide much value. This patch adds more detail about
why that bit needs to be cleared.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:35 +0000 (13:19 -0500)]
staging: iio: tsl2583: add tsl2583 to list of supported devices in the header
The header only listed the tsl2580 and tsl2581 devices as supported by
this driver. This patch adds the tsl2583 since it is also supported by
this driver.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:34 +0000 (13:19 -0500)]
staging: iio: tsl2583: move from a global to a per device lux table
The driver contains a global lux table that can be updated via sysfs.
Change this to a per device lux table so that multiple devices can be
hooked up to the same system with different lux tables.
There are 10 entries, plus 1 for the termination segment, set aside for
the entries in the lux table. When updating the lux table via sysfs,
only 9 entries, plus the terminator, could be added. This changes
the code to allow for the 10 entries, plus the terminator.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:31 +0000 (13:19 -0500)]
staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success
tsl2583_als_calibrate() returns the newly computed gain_trim if the
calibration was successful. This function is only called by
in_illuminance_calibrate_store() and the return value inside that
sysfs attribute is only checked to see if an error was returned.
This patch changes tsl2583_als_calibrate() to return 0 on success.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:30 +0000 (13:19 -0500)]
staging: iio: tsl2583: moved code block inside else statement
The check for ch1lux > ch0lux inside tsl2583_get_lux is only valid if
the ratio is not equal to zero. Move the code block inside the else
statement. This does away with the need to initialize the variables to
zero.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:29 +0000 (13:19 -0500)]
staging: iio: tsl2583: updated code comment to match what the code does
If channel 0 does not have any data, then the code sets the lux to zero.
The corresponding comment says that the last value is returned. This
updates the comment to correctly reflect what the code does. It also
clarifies the comment about why 0 is returned.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The definition of the tsl2583_device_lux struct has a series of single
line comments. There are two other cases where the multiline comments
did not have an initial blank line. Change these comments to use the
proper multiline syntax.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There are two separate files describing the tsl2583 sysfs attributes.
Combine the two files into one. Updated the name of the sysfs attributes
to match the current ABI.
Signed-off-by: Brian Masney <masneyb@onstation.org> Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:24 +0000 (13:19 -0500)]
staging: iio: tsl2583: fix alignment of #define values
Most of the values in the #defines have their values aligned on a single
column, but some do not. This changes the remaining defines to use
consistent alignment with the majority to improve code readability.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:23 +0000 (13:19 -0500)]
staging: iio: tsl2583: unify function and variable prefix to tsl2583_
Some functions and variables were prefixed with either taos, tsl258x,
taos2583, or tsl2583. Change everything to use the tsl2583 prefix since
that is the name of the .c file. The taos_settings member inside the
taos_settings struct was renamed to als_settings.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:22 +0000 (13:19 -0500)]
staging: iio: tsl2583: cleaned up logging
There are several places in the code where the function name is
hardcoded in the log message. Use the __func__ constant string to build
the log message. This also clarifies some of the error messages to match
the code and ensures that the correct priority is used since the message
is already being changed.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:21 +0000 (13:19 -0500)]
staging: iio: tsl2583: remove the FSF's mailing address
Address warning from checkpatch:
CHECK: Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:20 +0000 (13:19 -0500)]
staging: iio: tsl2583: remove redundant write to the control register in taos_probe()
taos_probe() calls i2c_smbus_write_byte() to select the control
register, however there are no subsequent calls to
i2c_smbus_read_byte(). The write call is unnecessary and is removed by
this patch.
Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:19 +0000 (13:19 -0500)]
staging: iio: tsl2583: change current chip state from a tristate to a bool
The current chip state is represented as a tristate (working, suspended,
and unknown). The unknown state was not used. This patch changes the
chip state so that it is now represented as a single boolean value
(suspended).
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:18 +0000 (13:19 -0500)]
staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume
The device probing and the suspend/resume code checks a flag internal to
the driver that determines whether or not the chip is in a working
state. These checks are not needed. This patch removes the unnecessary
checks. It will do no harm to the hardware if the chip is
reinitialized if it is already powered on.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:17 +0000 (13:19 -0500)]
staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux
taos_get_lux checks to see if the chip is in a working state. This
check is not necessary since it is only called from tsl2583_read_raw
and in_illuminance_calibrate_store (via taos_als_calibrate). The chip
state is already checked by these functions.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Sat, 12 Nov 2016 18:19:16 +0000 (13:19 -0500)]
staging: iio: tsl2583: check if chip is in a working state in in_illuminance_calibrate_store
in_illuminance_calibrate_store() did not check to see if the chip is
in a working state. This patch adds the proper check. The return value
from taos_als_calibrate() was also not checked in this function, so the
proper check was also added while changes are being made here.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Rosin [Tue, 8 Nov 2016 11:58:58 +0000 (12:58 +0100)]
iio: envelope-detector: ADC driver based on a DAC and a comparator
The DAC is used to find the peak level of an alternating voltage input
signal by a binary search using the output of a comparator wired to
an interrupt pin. Like so:
_
| \
input +------>-------|+ \
| \
.-------. | }---.
| | | / |
| dac|-->--|- / |
| | |_/ |
| | |
| | |
| irq|------<-------'
| |
'-------'
Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Rosin [Tue, 8 Nov 2016 11:58:56 +0000 (12:58 +0100)]
iio: dpot-dac: DAC driver based on a digital potentiometer
It is assumed that the dpot is used as a voltage divider between the
current dpot wiper setting and the maximum resistance of the dpot. The
divided voltage is provided by a vref regulator.
.------.
.-----------. | |
| vref |--' .---.
| regulator |--. | |
'-----------' | | d |
| | p |
| | o | wiper
| | t |<---------+
| | |
| '---' dac output voltage
| |
'------+------------+
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>