Jesper Juhl [Mon, 24 Oct 2011 14:53:36 +0000 (01:53 +1100)]
audit: always follow va_copy() with va_end()
A call to va_copy() should always be followed by a call to va_end() in the
same function. In kernel/autit.c::audit_log_vformat() this is not always
done. This patch makes sure va_end() is always called.
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mathias Krause [Mon, 24 Oct 2011 14:53:35 +0000 (01:53 +1100)]
arm, exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.
Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch/x86/kernel/tsc.c: In function 'calibrate_delay_is_known':
arch/x86/kernel/tsc.c:1012: error: 'struct cpuinfo_x86' has no member named 'phys_proc_id'
arch/x86/kernel/tsc.c:1012: error: 'struct cpuinfo_x86' has no member named 'phys_proc_id'
arch/x86/kernel/tsc.c:1006: warning: unused variable 'cpu'
Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jack Steiner <steiner@sgi.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jack Steiner [Mon, 24 Oct 2011 14:53:34 +0000 (01:53 +1100)]
x86: reduce clock calibration time during slave cpu startup
Reduce the startup time for slave cpus.
Adds hooks for an arch-specific function for clock calibration. These
hooks are used on x86. If a newly started cpu has the same phys_proc_id
as a core already active, uses the TSC for the delay loop and has a
CONSTANT_TSC, use the already-calculated value of loops_per_jiffy.
This patch reduces the time required to start slave cpus on a 4096 cpu
system from: 465 sec OLD 62 sec NEW
This reduces boot time on a 4096p system by almost 7 minutes. Nice...
Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shaohua Li [Mon, 24 Oct 2011 14:53:34 +0000 (01:53 +1100)]
x86: tlb flush avoid superflous leave_mm()
If just one page VA tlb is required to be flushed and current task is in
lazy TLB state, doing leave_mm() is superfluous because it flushes the
whole TLB. This can reduce some TLB miss.
Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
The last parameter to sort() is a pointer to the function used to swap
items. This parameter should be NULL, not 0, when not used. This quiets
the following sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
William Douglas [Mon, 24 Oct 2011 14:53:32 +0000 (01:53 +1100)]
x86,mrst: add mapping for bma023
There is now an upstream bma023 driver so instead of submitting ours we
use that one. The defaults are just fine so it's a simple mapping entry.
(Thanks go to Erik Andersson for incorporating the changes we needed into his
version)
Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Mon, 24 Oct 2011 14:53:32 +0000 (01:53 +1100)]
drivers/power/intel_mid_battery.c: fix build
Seems that nobody's even trying any more.
Cc: Nithish Mahalingam <nithish.mahalingam@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Major Lee <major_lee@wistron.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Feng Tang [Mon, 24 Oct 2011 14:53:30 +0000 (01:53 +1100)]
vrtc: change its year offset from 1960 to 1972
Real world year equals the value in vrtc YEAR register plus an offset. We
used 1960 for original developepment as the offset to make leap year
consistent, but for a device's first use, its YEAR register is 0 and the
system year will be parsed as 1960 which is not a valid UNIX time and will
cause many applications to fail mysteriously. Devices use 1972 instead to
fix this issue.
Updated patch which adds a sanity check suggested by Mathias
Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ludwig Nussel [Mon, 24 Oct 2011 14:53:30 +0000 (01:53 +1100)]
x86: fix mmap random address range
On x86_32 casting the unsigned int result of get_random_int() to long may
result in a negative value. On x86_32 the range of mmap_rnd() therefore
was -255 to 255. The 32bit mode on x86_64 used 0 to 255 as intended.
The bug was introduced by 675a081 ("x86: unify mmap_{32|64}.c") in January
2008.
Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shérab [Mon, 24 Oct 2011 14:53:29 +0000 (01:53 +1100)]
arch/x86/platform/iris/iris.c: register a platform device and a platform driver
This makes the iris driver use the platform API, so it is properly exposed
in /sys.
[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout] Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Bligh [Mon, 24 Oct 2011 14:53:27 +0000 (01:53 +1100)]
net/netfilter/nf_conntrack_netlink.c: fix Oops on container destroy
Problem:
A repeatable Oops can be caused if a container with networking
unshared is destroyed when it has nf_conntrack entries yet to expire.
A copy of the oops follows below. A perl program generating the oops
repeatably is attached inline below.
Analysis:
The oops is called from cleanup_net when the namespace is
destroyed. conntrack iterates through outstanding events and calls
death_by_timeout on each of them, which in turn produces a call to
ctnetlink_conntrack_event. This calls nf_netlink_has_listeners, which
oopses because net->nfnl is NULL.
The perl program generates the container through fork() then
clone(NS_NEWNET). I does not explicitly set up netlink
explicitly set up netlink, but I presume it was set up else net->nfnl
would have been NULL earlier (i.e. when an earlier connection
timed out). This would thus suggest that net->nfnl is made NULL
during the destruction of the container, which I think is done by
nfnetlink_net_exit_batch.
I can see that the various subsystems are deinitialised in the opposite
order to which the relevant register_pernet_subsys calls are called,
and both nf_conntrack and nfnetlink_net_ops register their relevant
subsystems. If nfnetlink_net_ops registered later than nfconntrack,
then its exit routine would have been called first, which would cause
the oops described. I am not sure there is anything to prevent this
happening in a container environment.
Whilst there's perhaps a more complex problem revolving around ordering
of subsystem deinit, it seems to me that missing a netlink event on a
container that is dying is not a disaster. An early check for net->nfnl
being non-NULL in ctnetlink_conntrack_event appears to fix this. There
may remain a potential race condition if it becomes NULL immediately
after being checked (I am not sure any lock is held at this point or
how synchronisation for subsystem deinitialization works).
Patch:
The patch attached should apply on everything from 2.6.26 (if not before)
onwards; it appears to be a problem on all kernels. This was taken against
Ubuntu-3.0.0-11.17 which is very close to 3.0.4. I have torture-tested it
with the above perl script for 15 minutes or so; the perl script hung the
machine within 20 seconds without this patch.
Applicability:
If this is the right solution, it should be applied to all stable kernels
as well as head. Apart from the minor overhead of checking one variable
against NULL, it can never 'do the wrong thing', because if net->nfnl
is NULL, an oops will inevitably result. Therefore, checking is a reasonable
thing to do unless it can be proven than net->nfnl will never be NULL.
Check net->nfnl for NULL in ctnetlink_conntrack_event to avoid Oops on
container destroy
Signed-off-by: Alex Bligh <alex@alex.org.uk> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix a typo in Documentation/cgroups/freezer-subsystem.txt.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Since commit 4a31a334, the name of this misc device is not initialized,
which leads to a funny device named /dev/(null) being created and
/proc/misc containing an entry with just a number but no name. The latter
leads to complaints by cryptsetup, which caused me to investigate this
matter.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Linus Torvalds [Sun, 6 Nov 2011 20:25:11 +0000 (12:25 -0800)]
Merge branch 'next/move' of git://git.linaro.org/people/arnd/arm-soc
* 'next/move' of git://git.linaro.org/people/arnd/arm-soc:
ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
ARM: EXYNOS4: convert MCT to percpu interrupt API
ARM: SAMSUNG: Add clk enable/disable of pwm
ARM: SAMSUNG: Fix compile error due to kfree
Linus Torvalds [Sun, 6 Nov 2011 20:14:22 +0000 (12:14 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Revert the check of NO_PRESENCE pincfg default bit
ALSA: hda - Fix a regression for DMA-position check with CA0110
ALSA: hda - Fix silent output regression with ALC861
ALSA: control: remove compilation warning on 32-bit
ALSA: ua101: fix crash when unplugging
projects / karo-tx-linux.git / log