Dan Carpenter [Sun, 15 Jan 2012 11:29:39 +0000 (14:29 +0300)]
staging: precedence bug in crystalhd_stop_tx_dma_engine()
The intent here is to see if we have cleared the DMA_START_BIT flag. We
clear it a couple lines later. The current code has a precedence bug so
it is equivalent to "if (!dma_cntrl) { ...".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Thu, 9 Feb 2012 01:42:03 +0000 (19:42 -0600)]
staging: r8712u: Simplify semaphores
I am preparing to convert this driver from semaphore to mutex locking,
The first step has been to eliminate a number of semaphores that were
initialized but never used, and one whose only use was a single "up"
after initialization. A total of 9 semaphores were removed in this process.
One other change was to remove some inline semaphore routines that were
unused.
In addition, several cases had the following structure:
down()
if () {
...
}
up()
The locking overhead was reduced by moving the up/down inside the if
block.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Thu, 5 Jan 2012 01:29:03 +0000 (20:29 -0500)]
Staging: bcm: Remove assignment from if statement and reverse if logic for readability.
This patch removes an assignment from an if statement,
and it reverses the logic in several if statements to
make them more readable and understandable.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces the obsolete variable, __FUNCTION__,
that holds the name of the current function with
variable, __func__. Reported by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Tue, 20 Dec 2011 15:41:13 +0000 (10:41 -0500)]
Staging: bcm: Fix an integer overflow in IOCTL_BCM_NVM_READ/WRITE
Variables stNVMReadWrite.uioffset and stNVMReadWrite.uiNumBytes
are chosen from userspace and can be very high. The sum of
these two digits would result in a small number. Therefore,
this patch verifies a negative number was not entered, and
reorganizes the equation to remove the integer overflow.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch creates a new memory allocation library named
zsmalloc.
NOTE: zsmalloc currently depends on SPARSEMEM for the MAX_PHYSMEM_BITS
value needed to determine the format of the object handle. There may
be a better way to do this. Feedback is welcome.
Seth Jennings [Tue, 3 Jan 2012 22:31:34 +0000 (16:31 -0600)]
staging: zcache: crypto API support
This patch allow zcache to use the crypto API for page compression.
It replaces the direct LZO compress/decompress calls with calls
into the crypto compression API. The compressor to be used is
specified in the kernel boot line with the zcache parameter like:
zcache=lzo or zcache=deflate. If the specified compressor can't
be loaded, zcache uses lzo as the default compressor.
K. Y. Srinivasan [Thu, 12 Jan 2012 20:38:01 +0000 (12:38 -0800)]
Staging: hv: storvsc: Get rid of the on_io_completion in hv_storvsc_request
Get rid of the on_io_completion field in struct hv_storvsc_request. As part of this
relocate the bounce buffer handling code (to avoid having forward declarations).
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup storvsc_queuecommand(). As part of this cleanup, rename the function to
check if the scsi command can be sent to the host, consolidate error recovery
and get rid of some dead code.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Magenheimer [Mon, 30 Jan 2012 22:39:19 +0000 (14:39 -0800)]
staging: ramster: ramster-specific new files
New files for ramster support: The file ramster.h declares externs
and some pampd bitfield manipulation. The file zcache.h declares
some zcache functions that now must be accessed from the ramster
glue code. The file ramster_o2net.c is the glue between
zcache and the o2net messaging code, providing routines called
from zcache that initiate messages, and routines that handle
messages by calling zcache. TODO explains future plans for merging.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Magenheimer [Mon, 30 Jan 2012 22:39:19 +0000 (14:39 -0800)]
staging: ramster: ramster-specific changes to zcache/tmem
In tmem.[ch], new "repatriate" (provoke async get) and "localify" (handle
incoming data resulting from an async get) routines combine with a handful
of changes to existing pamops interfaces allow the generic tmem code
to support asynchronous operations. Also, a new tmem_xhandle struct
groups together key information that must be passed to remote tmem stores.
Zcache-main.c is augmented with a large amount of ramster-specific code
to handle remote operations and "foreign" pages on both ends of the
"remotify" protocol. New "foreign" pools are auto-created on demand.
A "selfshrinker" thread periodically repatriates remote persistent pages
when local memory conditions allow. For certain operations, a queue is
necessary to guarantee strict ordering as out-of-order puts/flushes can
cause strange race conditions. Pampd pointers now either point to local
memory OR describe a remote page; to allow the same 64-bits to describe
either, the LSB is used to differentiate. Some acrobatics must be performed
to ensure local memory is available to handle a remote persistent get,
or deal with the data directly anyway if the malloc failed. Lots
of ramster-specific statistics are available via sysfs.
Note: Some debug ifdefs left in for now. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Magenheimer [Mon, 30 Jan 2012 22:39:18 +0000 (14:39 -0800)]
staging: ramster: ramster-specific changes to cluster code
Ramster-specific changes to ocfs2 cluster foundation, including:
A method for fooling the o2 heartbeat into starting without
an ocfs2 filesystem; a new message mechanism ("data magic") for handling
a reply to a message requesting data; a hack for keeping the cluster
alive even after timeouts so cluster machines can be rebooted separately.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Magenheimer [Mon, 30 Jan 2012 22:39:18 +0000 (14:39 -0800)]
staging: ramster: local compression + tmem
Copy files from drivers/staging/zcache. Ramster compresses pages
locally before transmitting them to another node, so we can
leverage the zcache and tmem code directly. Note: there are
no ramster-specific changes yet to these files.
(Why copy? The ramster tmem.c/tmem.h changes are definitely shareable
between zcache and ramster; the eventual destination for tmem.c
is the linux lib directory. Ramster changes to zcache are more substantial
and zcache is currently undergoing some significant unrelated changes
(including a new allocator and breaking zcache-main.c into smaller files),
so it seemed best to branch temporarily and merge later.)
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Magenheimer [Mon, 30 Jan 2012 22:39:18 +0000 (14:39 -0800)]
staging: ramster: cluster/messaging foundation
Copy cluster subdirectory from ocfs2. These files implement
the basic cluster discovery, mapping, heartbeat / keepalive, and
messaging ("o2net") that ramster requires for internode communication.
Note: there are NO ramster-specific changes yet; this commit
does NOT pass checkpatch since the copied source files do not.
(Why copy? This particular part of ocfs2 has never been broken out
for non-ocfs2 use before, some (small) changes are required for ramster
to use that code, and ramster is currently incompatible with real
ocfs2 anyway (requires !CONFIG_OCFS2_FS). Before ramster can be promoted
out of staging, we will need to work with the ocfs2 maintainers to
see if the code interdependencies can be merged, but for now, for
staging, this seemed to be an expedient way to make use of the ocfs2
core cluster code while still incorporating necessary changes for ramster.)
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Vorontsov [Mon, 6 Feb 2012 16:29:47 +0000 (20:29 +0400)]
staging: android/lowmemorykiller: Better mm handling
LMK should not directly check for task->mm. The reason is that the
process' threads may exit or detach its mm via use_mm(), but other
threads may still have a valid mm. To catch this we use
find_lock_task_mm(), which walks up all threads and returns an
appropriate task (with lock held).
Grabbing tasklist_lock has its disadvantages, i.e. it blocks
process creation and destruction. If there are lots of processes,
blocking doesn't sound as a great idea.
For LMK, it is sufficient to surround tasks list traverse with
rcu_read_{,un}lock().
>From now on using force_sig() is not safe, as it can race with an
already exiting task, so we use send_sig() now. As a downside, it
won't kill PID namespace init processes, but that's not what we
want anyway.
Tim Bird [Wed, 8 Feb 2012 18:37:57 +0000 (10:37 -0800)]
staging: android: logger: simplify and optimize get_entry_len
Make this code slightly easier to read, and eliminate calls
to sub-routines. Some of these were previously optimized away
by the compiler, but one memcpy was not.
In my testing, this makes the code about 20% smaller, and
has no sub-routine calls and no branches (on ARM).
v2 of this patch is, IMHO, easier to read than v1. Compared to
that patch it uses __u8 instead of unsigned char, for
consistency with the __u16 val data type, simplifies the
conditional expression, adds a another comment, and
moves a common statement out of the if.
Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dietrich [Mon, 26 Dec 2011 16:57:37 +0000 (17:57 +0100)]
staging: nvec: ps2: change serio type to passthrough
This changes the serio type of the nvec_ps2 mouse port to passthrough.
The old 8042 type seems appropiete for keyboards only.
Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marc Dietrich [Mon, 26 Dec 2011 16:57:36 +0000 (17:57 +0100)]
staging: nvec: ps2: disable/enable mouse on suspend/resume
This change makes the touchpad buttons work after suspend/resume.
Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marc Dietrich [Mon, 26 Dec 2011 16:57:35 +0000 (17:57 +0100)]
staging: nvec: ps2: add some more debug functions
This can print the mouse traffic which goes over the i2c bus. Make
mouse debugging messages configurable and disable them by default.
Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marc Dietrich [Mon, 26 Dec 2011 16:57:34 +0000 (17:57 +0100)]
staging: nvec: ps2: tell nvec to send 6 byte long messages
This packet size used on most modern touchpads. Ideally, this should
be configurable or autodetected.
Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marc Dietrich [Mon, 26 Dec 2011 16:57:33 +0000 (17:57 +0100)]
staging: nvec: ps2: let the start/stop streaming commands be called by the start/stop functions of serio
Instead of executing these commands during open/close, the start/stop
event of the serio device seem to be more appropiete.
Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marc Dietrich [Mon, 26 Dec 2011 16:57:32 +0000 (17:57 +0100)]
staging: nvec: ps2: add suspend/resume functions
This adds suspend and resume functions to the nvec_ps2 mouse driver.
During suspend the nvec sends a "Cancel all mouse events" command. If
this is missed, there will be still some bytes in the received buffer
after resume which make the mouse go out of sync.
Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Allyn [Wed, 28 Dec 2011 17:37:59 +0000 (17:37 +0000)]
staging: sep: SEP update
This is basically a rewrite so there isn't a nice easy to present way of
providing this as a patch series. This patch is a pull of Mark's new driver into
the upstream staging area. On top of that are a series of patches by
Andy Shevchenko to make it build on the current tree, fix a few things and
even get it passed sparse.
The new driver supports the kernel crypto layer, passes the coding style checks,
passes human taste checks and has proper kernel-doc formatted comments.
I've then folded back in some later fixes it was missing that got applied to
to the kernel tree.
This should be ready for more serious review with a view to migration from
the staging tree shortly.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
[Forward port and some bug fixing] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Fold and tweaks for 3.2] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Thu, 19 Jan 2012 22:53:06 +0000 (14:53 -0800)]
Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/accounting, proc: Fix /proc/stat interrupts sum
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
x86/kprobes: Fix typo transferred from Intel manual
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
x86/kconfig: Move the ZONE_DMA entry under a menu
x86/UV2: Add accounting for BAU strong nacks
x86/UV2: Ack BAU interrupt earlier
x86/UV2: Remove stale no-resources test for UV2 BAU
x86/UV2: Work around BAU bug
x86/UV2: Fix BAU destination timeout initialization
x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
x86: Get rid of dubious one-bit signed bitfield
Linus Torvalds [Thu, 19 Jan 2012 22:49:16 +0000 (14:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qnx4: don't leak ->BitMap on late failure exits
qnx4: reduce the insane nesting in qnx4_checkroot()
qnx4: di_fname is an array, for crying out loud...
vfs: remove printk from set_nlink()
wake up s_wait_unfrozen when ->freeze_fs fails
H. Peter Anvin [Thu, 19 Jan 2012 20:41:25 +0000 (12:41 -0800)]
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
In checkin
303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables
the feature macros in <asm/unistd.h> were unified between 32 and 64
bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.
Linus Torvalds [Thu, 19 Jan 2012 19:46:08 +0000 (11:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Permit key_serial() to be called with a const key pointer
keys: fix user_defined key sparse messages
ima: fix cred sparse warning
MPILIB: Add a missing ENOMEM check
Linus Torvalds [Thu, 19 Jan 2012 03:26:11 +0000 (19:26 -0800)]
uml: fix compile for x86-64
Randy Dunlap reports that we get
arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here
when compiling UML for x86-64.
Stephen Rothwell root-caused it and says:
"Caused by commit d7e7528bcd45 ("Audit: push audit success and retcode
into arch ptrace.h") (another patch that was never in linux-next :-().
This file now needs protection against double inclusion."
so let's do as the man says.
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 18 Jan 2012 23:59:18 +0000 (15:59 -0800)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
target: Set additional sense length field in sense data
target: Remove legacy device status check from transport_execute_tasks
target: Remove __transport_execute_tasks() for each processing context
target: Remove extra se_device->execute_task_lock access in fast path
target: Drop se_device TCQ queue_depth usage from I/O path
target: Fix possible NULL pointer with __transport_execute_tasks
target: Remove TFO->check_release_cmd() fabric API caller
tcm_fc: Convert ft_send_work to use target_submit_cmd
target: Add target_submit_cmd() for process context fabric submission
target: Make target_put_sess_cmd use target_release_cmd_kref
target: Set response format in INQUIRY response
target: tcm_mod_builder: small fixups
Documentation/target: Fix tcm_mod_builder.py build breakage
target: remove overagressive ____cacheline_aligned annoations
tcm_loop: bump max_sectors
target/configs: remove trailing newline from udev_path and alias
iscsi-target: fix chap identifier simple_strtoul usage
target: remove useless casts
target: simplify target_check_cdb_and_preempt
target: Move core_scsi3_check_cdb_abort_and_preempt
...
Linus Torvalds [Wed, 18 Jan 2012 23:51:48 +0000 (15:51 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.
APEI has patches resulting from testing on real hardware.
Plus other random fixes.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
ACPI processor: Remove unneeded cpuidle_unregister_driver call
intel idle: Make idle driver more robust
intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
intel_idle: remove redundant local_irq_disable() call
ACPI processor: Fix error path, also remove sysdev link
ACPI: processor: fix acpi_get_cpuid for UP processor
intel_idle: fix API misuse
ACPI APEI: Convert atomicio routines
ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
ACPI: Fix possible alignment issues with GAS 'address' references
ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
ACPI: Store SRAT table revision
ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
ACPI, Record ACPI NVS regions
ACPI, APEI, EINJ, Refine the fix of resource conflict
...
Stefan Berger [Wed, 18 Jan 2012 03:07:30 +0000 (22:07 -0500)]
tpm: fix (ACPI S3) suspend regression
This patch fixes an (ACPI S3) suspend regression introduced in commit 68d6e6713fcb ("tpm: Introduce function to poll for result of self test")
and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers
active.
The suspend problem occurred if the TPM was disabled and/or deactivated
and therefore the TPM_PCRRead checking the result of the (asynchronous)
self test returned an error code which then caused the tpm_tis driver to
become inactive and this then seemed to have negatively influenced the
suspend support by the tpm_infineon driver... Besides that the tpm_tis
drive may stay active even if the TPM is disabled and/or deactivated.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 18 Jan 2012 23:41:27 +0000 (15:41 -0800)]
nvme: fix merge error due to change of 'make_request_fn' fn type
The type of 'make_request_fn' changed in 5a7bbad27a4 ("block: remove
support for bio remapping from ->make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:
drivers/block/nvme.c: In function 'nvme_alloc_ns':
drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'
It's benign, but the warning is annoying.
Reported-by: Stephen Rothwell <sfr@canb.auug.org> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell [Wed, 18 Jan 2012 23:24:31 +0000 (10:24 +1100)]
xen: using EXPORT_SYMBOL requires including export.h
Fix these warnings:
drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default]
drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default]
projects / linux-beck.git / log