Mathias Krause [Wed, 5 Oct 2011 00:42:28 +0000 (11:42 +1100)]
arm, exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.
Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shaohua Li [Wed, 5 Oct 2011 00:42:28 +0000 (11:42 +1100)]
x86: tlb flush avoid superflous leave_mm()
If just one page VA tlb is required to be flushed and current task is in
lazy TLB state, doing leave_mm() is superfluous because it flushes the
whole TLB. This can reduce some TLB miss.
Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
The last parameter to sort() is a pointer to the function used to swap
items. This parameter should be NULL, not 0, when not used. This quiets
the following sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
William Douglas [Wed, 5 Oct 2011 00:42:26 +0000 (11:42 +1100)]
x86,mrst: add mapping for bma023
There is now an upstream bma023 driver so instead of submitting ours we
use that one. The defaults are just fine so it's a simple mapping entry.
(Thanks go to Erik Andersson for incorporating the changes we needed into his
version)
Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Wed, 5 Oct 2011 00:42:26 +0000 (11:42 +1100)]
drivers/power/intel_mid_battery.c: fix build
Seems that nobody's even trying any more.
Cc: Nithish Mahalingam <nithish.mahalingam@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Major Lee <major_lee@wistron.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Feng Tang [Wed, 5 Oct 2011 00:42:25 +0000 (11:42 +1100)]
vrtc: change its year offset from 1960 to 1972
Real world year equals the value in vrtc YEAR register plus an offset. We
used 1960 for original developepment as the offset to make leap year
consistent, but for a device's first use, its YEAR register is 0 and the
system year will be parsed as 1960 which is not a valid UNIX time and will
cause many applications to fail mysteriously. Devices use 1972 instead to
fix this issue.
Updated patch which adds a sanity check suggested by Mathias
Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ludwig Nussel [Wed, 5 Oct 2011 00:42:24 +0000 (11:42 +1100)]
x86: fix mmap random address range
On x86_32 casting the unsigned int result of get_random_int() to long may
result in a negative value. On x86_32 the range of mmap_rnd() therefore
was -255 to 255. The 32bit mode on x86_64 used 0 to 255 as intended.
The bug was introduced by 675a081 ("x86: unify mmap_{32|64}.c") in January
2008.
Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shérab [Wed, 5 Oct 2011 00:42:23 +0000 (11:42 +1100)]
arch/x86/platform/iris/iris.c: register a platform device and a platform driver
This makes the iris driver use the platform API, so it is properly exposed
in /sys.
[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout] Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The problem is that in copy_page_range() we turn lazy mode on, and then in
swap_entry_free() we call swap_count_continued() which ends up in:
map = kmap_atomic(page, KM_USER0) + offset;
and then later we touch *map.
Since we are running in batched mode (lazy) we don't actually set up the
PTE mappings and the kmap_atomic is not done synchronously and ends up
trying to dereference a page that has not been set.
Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and
doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem
go away.
Interestingly, commit b8bcfe997e4615 ("x86/paravirt: remove lazy mode in
interrupts") removed part of this to fix an interrupt issue - but it went
to far and did not consider this scenario.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@google.com>
Andy Whitcroft [Wed, 5 Oct 2011 00:42:22 +0000 (11:42 +1100)]
readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
Since the commit below which added O_PATH support to the *at() calls, the
error return for readlink/readlinkat for the empty pathname has switched
from ENOENT to EINVAL:
readlinkat(), fchownat() and fstatat() with empty relative pathnames
This is both unexpected for userspace and makes readlink/readlinkat
inconsistant with all other interfaces; and inconsistant with our stated
return for these pathnames.
As the readlinkat call does not have a flags parameter we cannot use the
AT_EMPTY_PATH approach used in the other calls. Therefore expose whether
the original path is infact entry via a new user_path_at_empty() path
lookup function. Use this to determine whether to default to EINVAL or
ENOENT for failures.
BugLink: http://bugs.launchpad.net/bugs/817187 Signed-off-by: Andy Whitcroft <apw@canonical.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Bligh [Wed, 5 Oct 2011 00:42:21 +0000 (11:42 +1100)]
net/netfilter/nf_conntrack_netlink.c: fix Oops on container destroy
Problem:
A repeatable Oops can be caused if a container with networking
unshared is destroyed when it has nf_conntrack entries yet to expire.
A copy of the oops follows below. A perl program generating the oops
repeatably is attached inline below.
Analysis:
The oops is called from cleanup_net when the namespace is
destroyed. conntrack iterates through outstanding events and calls
death_by_timeout on each of them, which in turn produces a call to
ctnetlink_conntrack_event. This calls nf_netlink_has_listeners, which
oopses because net->nfnl is NULL.
The perl program generates the container through fork() then
clone(NS_NEWNET). I does not explicitly set up netlink
explicitly set up netlink, but I presume it was set up else net->nfnl
would have been NULL earlier (i.e. when an earlier connection
timed out). This would thus suggest that net->nfnl is made NULL
during the destruction of the container, which I think is done by
nfnetlink_net_exit_batch.
I can see that the various subsystems are deinitialised in the opposite
order to which the relevant register_pernet_subsys calls are called,
and both nf_conntrack and nfnetlink_net_ops register their relevant
subsystems. If nfnetlink_net_ops registered later than nfconntrack,
then its exit routine would have been called first, which would cause
the oops described. I am not sure there is anything to prevent this
happening in a container environment.
Whilst there's perhaps a more complex problem revolving around ordering
of subsystem deinit, it seems to me that missing a netlink event on a
container that is dying is not a disaster. An early check for net->nfnl
being non-NULL in ctnetlink_conntrack_event appears to fix this. There
may remain a potential race condition if it becomes NULL immediately
after being checked (I am not sure any lock is held at this point or
how synchronisation for subsystem deinitialization works).
Patch:
The patch attached should apply on everything from 2.6.26 (if not before)
onwards; it appears to be a problem on all kernels. This was taken against
Ubuntu-3.0.0-11.17 which is very close to 3.0.4. I have torture-tested it
with the above perl script for 15 minutes or so; the perl script hung the
machine within 20 seconds without this patch.
Applicability:
If this is the right solution, it should be applied to all stable kernels
as well as head. Apart from the minor overhead of checking one variable
against NULL, it can never 'do the wrong thing', because if net->nfnl
is NULL, an oops will inevitably result. Therefore, checking is a reasonable
thing to do unless it can be proven than net->nfnl will never be NULL.
Check net->nfnl for NULL in ctnetlink_conntrack_event to avoid Oops on
container destroy
Signed-off-by: Alex Bligh <alex@alex.org.uk> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Wed, 5 Oct 2011 00:42:20 +0000 (11:42 +1100)]
drivers/net/ethernet/i825xx/3c505.c: fix build with dynamic debug
The `#define filename' screws up the expansion of
DEFINE_DYNAMIC_DEBUG_METADATA:
drivers/net/ethernet/i825xx/3c505.c: In function 'send_pcb':
drivers/net/ethernet/i825xx/3c505.c:390: error: expected identifier before string constant
drivers/net/ethernet/i825xx/3c505.c:390: error: expected '}' before '.' token
drivers/net/ethernet/i825xx/3c505.c:436: error: expected identifier before string constant
drivers/net/ethernet/i825xx/3c505.c:435: error: expected '}' before '.' token
drivers/net/ethernet/i825xx/3c505.c: In function 'start_receive':
drivers/net/ethernet/i825xx/3c505.c:557: error: expected identifier before string constant
drivers/net/ethernet/i825xx/3c505.c:557: error: expected '}' before '.' token
drivers/net/ethernet/i825xx/3c505.c: In function 'receive_packet':
drivers/net/ethernet/i825xx/3c505.c:629: error: expected identifier before string constant
etc
Cc: Philip Blundell <philb@gnu.org> Cc: David Miller <davem@davemloft.net> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In file included from arch/x86/kernel/pci-dma.c:3:
include/linux/dmar.h:248: warning: 'struct acpi_dmar_header' declared inside parameter list
include/linux/dmar.h:248: warning: its scope is only this definition or declaration, which is probably not what you want
projects / karo-tx-linux.git / log