Jean Delvare [Wed, 24 Aug 2011 01:19:41 +0000 (11:19 +1000)]
hwmon: (ibmaem) Avoid repeated memory allocations
Preallocate a buffer for the response to sensor reads, and reuse it
for each read instead of allocating a new one each time. This should
be faster and should also avoid memory fragmentation.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Wed, 24 Aug 2011 01:19:38 +0000 (11:19 +1000)]
hwmon: (ibmaem) Fix error paths
I am under the impression that error paths in functions
aem_init_aem1_inst() and aem_init_aem2_inst() are incorrect. In
several cases, the function returns 0 on error, which I suspect is
not intended. Fix this by properly tracking error codes.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Dean Nelson [Wed, 24 Aug 2011 01:19:37 +0000 (11:19 +1000)]
hwmon: Avoid building drivers for powerpc that read/write ISA addresses
A modprobe of hwmon drivers that read/write ISA addresses on a powerpc results
in a kernel Oops. These reads/writes are being done via the inb()/in_8() and
outb()/out_8() macros.
Prevent these drivers from being built for powerpc.
Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
drivers/i2c/busses/i2c-elektor.c: In function ‘pcf_isa_init’:
drivers/i2c/busses/i2c-elektor.c:153: error: implicit declaration of function ‘ioport_map’
drivers/i2c/busses/i2c-elektor.c:153: warning: assignment makes pointer from integer without a cast
drivers/i2c/busses/i2c-elektor.c: In function ‘elektor_probe’:
drivers/i2c/busses/i2c-elektor.c:287: error: implicit declaration of function ‘ioport_unmap’
Since commit 82ed223c264def2b15ee4bec2e8c3048092ceb5f ("iomap: make IOPORT/PCI
mapping functions conditional"), ioport_map() is only available on platforms
that set HAS_IOPORT.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jean Delvare <khali@linuxfr.org>
Stefan Berger [Tue, 23 Aug 2011 12:52:10 +0000 (08:52 -0400)]
tpm: suppress durations sysfs output if not read
Suppress the output in the 'durations' sysfs entry if they were not read
during driver initialization. This is similar to other sysfs entries
that return nothing if for some reason sending the commands to the TPM
fails.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
Seth Jennings [Wed, 10 Aug 2011 17:56:49 +0000 (12:56 -0500)]
staging: zcache: fix crash on high memory swap
zcache_put_page() was modified to pass page_address(page) instead of the
actual page structure. In combination with the function signature changes
to tmem_put() and zcache_pampd_create(), zcache_pampd_create() tries to
(re)derive the page structure from the virtual address. However, if the
original page is a high memory page (or any unmapped page), this
virt_to_page() fails because the page_address() in zcache_put_page()
returned NULL.
This patch changes zcache_put_page() and zcache_get_page() to pass
the page structure instead of the page's virtual address, which
may or may not exist.
Émeric Maschino [Tue, 23 Aug 2011 19:48:23 +0000 (21:48 +0200)]
[IA64] agp/hp-agp: Allow binding user memory to the AGP GART
dmesg reports:
[ 29.365973] [TTM] AGP Bind memory failed.
[ 29.366015] radeon 0000:80:00.0: object_init failed for (4096, 0x00000002)
[ 29.366052] radeon 0000:80:00.0: (-22) create WB bo failed
[ 29.366087] radeon 0000:80:00.0: Disabling GPU acceleration
[ 29.366124] [drm] radeon: cp finalized
[ 29.366168] [drm] radeon: cp finalized
[ 29.366210] [TTM] Finalizing pool allocator.
[ 29.366924] [TTM] Zone kernel: Used memory at exit: 0 kiB.
[ 29.366961] [TTM] Zone dma32: Used memory at exit: 0 kiB.
[ 29.366996] [drm] radeon: ttm finalized
[ 29.367030] [drm] Forcing AGP to PCI mode
This patch allows binding user memory to the AGP GART on zx1-based
systems. dmesg thus no more complains about AGP bind memory failure,
disabled GPU acceleration or AGP mode forced to PCI.
Original work from Francisco Jerez in agp/amd-k7
(https://lkml.org/lkml/2010/10/15/469).
Tested-by: Émeric Maschino <emeric.maschino@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
staging: brcm80211: fix compile error on non-x86 archs since 3.0 kernel
Since the arrival of kernel version 3.0 in the staging tree it
turns out compile error occurs for sparc64, powerpc, and arm
platforms. This patch fixes that issue.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Luciano Coelho [Tue, 23 Aug 2011 08:42:25 +0000 (11:42 +0300)]
wl12xx: add max_sched_scan_ssids value to the hw description
After commit 5a865ba, we require a separate value to indicate the
number of supported SSIDs in scheduled scans. This patch adds a
proper value to the wl12xx driver.
This fixes a regression in 3.1-rc3 where scheduled scans were not
working properly with the wl12xx driver.
Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ido Yariv [Mon, 22 Aug 2011 20:19:49 +0000 (23:19 +0300)]
wl12xx: Fix validation of pm_runtime_get_sync return value
wl1271_sdio_power_on checks if the return value of pm_runtime_get_sync
is non-zero, and if so bails out.
However, pm_runtime_get_sync can return a positive number which does not
suggest an error has occurred. This is problematic for two reasons:
1. The function will needlessly bail out without decrementing back the
runtime PM reference counter.
2. wl1271_power_on only checks if wl1271_power_on return value is
negative. This means that wl1271_power_on will continue even if
wl1271_sdio_power_on bailed out. As a result, sdio transactions will
be initiated without properly enabling the sdio function and claiming
the host. This could even lead to a kernel panic.
Fix this by only checking that the return value of pm_runtime_get_sync
is non-negative.
Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ido Yariv [Mon, 22 Aug 2011 20:19:48 +0000 (23:19 +0300)]
wl12xx: Remove obsolete testmode NVS push command
The testmode NVS push command is no longer in use. In addition, it has
several implementation issues that prevent it from working correctly:
1. wl1271_tm_cmd_configure relies on wl->chip.id being set. However,
since the device was not necessarily booted by the time the function
is called, wl->chip.id will be initialized to 0.
2. The NVS file is fetched by calling request_firmware() before it is
possible to push an NVS file.
3. The maximum allowed size of nl binary payloads is not sufficient for
pushing NVS files.
4. Pushing 128x NVS files will always fail due to a bug in the
validation code.
5. In case the pushed NVS file is found invalid, the mutex will be kept
locked and the nvs member will become a dangling pointer.
Since this feature is not being used, remove it completely instead of
fixing it.
Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Linus Torvalds [Tue, 23 Aug 2011 18:41:44 +0000 (11:41 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: fix tracing builds inside the source tree
xfs: remove subdirectories
xfs: don't expect xfs headers to be in subdirectories
Grant Likely [Tue, 23 Aug 2011 18:15:33 +0000 (12:15 -0600)]
mmc: sdhci-tegra: Add Device Tree probing support
Add hooks to read gpio configuration out of the device tree node.
[grant.likely: Rewrite of original patch from John Bonesio] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[swarren: Fixed tegra_sdhci_get_ro() to retrieve pdata correctly]
[swarren: Reworked to avoid #ifdef CONFIG_OF]
[swarren: Reworked binding based on fsl-imx-esdhc.txt]
[swarren: Documented binding] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Nick Pelly [Fri, 15 Jul 2011 20:53:08 +0000 (13:53 -0700)]
omap-serial: Allow IXON and IXOFF to be disabled.
Fixes logic bug that software flow control cannot be disabled, because
serial_omap_configure_xonxoff() is not called if both IXON and IXOFF bits
are cleared.
projects / karo-tx-linux.git / log