Similar to semctl and msgctl, when calling msgctl, the *_INFO and *_STAT
commands can be performed without acquiring the ipc object.
Add a shmctl_nolock() function and move the logic of *_INFO and *_STAT out
of msgctl(). Since we are just moving functionality, this change still
takes the lock and it will be properly lockless in the next patch.
ipc,shm: introduce lockless functions to obtain the ipc object
This is the third and final patchset that deals with reducing the amount
of contention we impose on the ipc lock (kern_ipc_perm.lock). These
changes mostly deal with shared memory, previous work has already been
done for semaphores and message queues:
With these patches applied, a custom shm microbenchmark stressing shmctl
doing IPC_STAT with 4 threads a million times, reduces the execution time
by 50%. A similar run, this time with IPC_SET, reduces the execution time
from 3 mins and 35 secs to 27 seconds.
Patches 1-8: replaces blindly taking the ipc lock for a smarter combination
of rcu and ipc_obtain_object, only acquiring the spinlock when updating.
Patch 9: renames the ids rw_mutex to rwsem, which is what it already was.
Patch 10: is a trivial mqueue leftover cleanup
Patch 11: adds a brief lock scheme description, requested by Andrew.
This patch:
Add shm_obtain_object() and shm_obtain_object_check(), which will allow us
to get the ipc object without acquiring the lock. Just as with other
forms of ipc, these functions are basically wrappers around
ipc_obtain_object*().
When I'm using below ktap script to trace all event tracepoints, without
this patch, the system will hang in few seconds, the patch indeed fix the
problem as the changelog pointed.
This patch is old, I can found the original patch discussion in 2007.
http://marc.info/?l=linux-kernel&m=118544794717162&w=2 (In that mail
thread, the patch didn't fix that problem, but it fix the problem I
encountered now)
Ingo's original changelog:
Remove timer calls (!!!) from deep within the tracing infrastructure.
This was totally bogus code that can cause lockups and worse.
Poll the buffer every 2 jiffies for now.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
signals: eventpoll: set ->saved_sigmask at the start
task_struct->saved_sigmask has no meaning unless we return with
set_restore_sigmask() and nobody except current can use it.
This means that sys_epoll_pwait() doesn't need to save ->blocked
into the local var and then memcopy it into ->saved_sigmask, we
can simply set ->saved_sigmask right before set_current_blocked().
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement preallocation via the fallocate syscall on VFAT partitions.
With FALLOC_FL_KEEP_SIZE, there is no way to distinguish if the mismatch
between i_size and no. of clusters allocated is a consequence of
fallocate or just plain corruption. When a non fallocate aware (old)
linux fat driver tries to write to such a file, it throws an error.Also,
fsck detects this as inconsistency and truncates the prealloc'd blocks.
To avoid this, as suggested by OGAWA, remove changes that make fallocate
persistent across mounts and restrict lifetime of blocks from fallocate(2)
to file release.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ravishankar N <ravi.n1@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
autofs4: translate pids to the right namespace for the daemon
The PID and the TGID of the process triggering the mount are sent to the
daemon. Currently the global pid values are sent (ones valid in the
initial pid namespace) but this is wrong if the autofs daemon itself is
not running in the initial pid namespace.
So send the pid values that are valid in the namespace of the autofs daemon.
The namespace to use is taken from the oz_pgrp pid pointer, which was set
at mount time to the mounting process' pid namespace.
If the pid translation fails (the triggering process is in an unrelated
pid namespace) then the automount fails with ENOENT.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Ian Kent <raven@themaw.net> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
autofs4: allow autofs to work outside the initial PID namespace
Enable autofs4 to work in a "container". oz_pgrp is converted from pid_t
to struct pid and this is stored at mount time based on the "pgrp=" option
or if the option is missing then the current pgrp.
The "pgrp=" option is interpreted in the PID namespace of the current
process. This option is flawed in that it doesn't carry the namespace
information, so it should be deprecated. AFAICS the autofs daemon always
sends the current pgrp, which is the default anyway.
The oz_pgrp is also set from the AUTOFS_DEV_IOCTL_SETPIPEFD_CMD ioctl.
This ioctl sets oz_pgrp to the current pgrp. It is not allowed to change
the pid namespace.
oz_pgrp is used mainly to determine whether the process traversing the
autofs mount tree is the autofs daemon itself or not. This function now
compares the pid pointers instead of the pid_t values.
One other use of oz_pgrp is in autofs4_show_options. There is shows the
virtual pid number (i.e. the one that is valid inside the PID namespace
of the calling process)
For debugging printk convert oz_pgrp to the value in the initial pid
namespace.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Ian Kent <raven@themaw.net> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jean Delvare [Thu, 18 Jul 2013 23:56:49 +0000 (09:56 +1000)]
firmware/dmi_scan: drop OOM messages
As reported by Joe Perches: OOM messages generally aren't useful.
dmi_alloc is either a trivial front-end to kzalloc, and kzalloc already
does a dump_stack() when OOM, or for x86, dmi_alloc uses extend_brk which
BUGs when unsuccessful.
So we can remove all 6 such log messages in the dmi_scan driver, to shrink
the binary size (by 528 bytes on x86_64.)
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jean Delvare [Thu, 18 Jul 2013 23:56:49 +0000 (09:56 +1000)]
firmware/dmi_scan: constify strings
Add const to all DMI string pointers where this is possible. This fixes a
checkpatch warning.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jean Delvare [Thu, 18 Jul 2013 23:56:49 +0000 (09:56 +1000)]
firmware/dmi_scan: fix most checkpatch errors and warnings
Fix all errors and trivial warnings reported by checkpatch for file
drivers/firmware/dmi_scan.c.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jean Delvare [Thu, 18 Jul 2013 23:56:49 +0000 (09:56 +1000)]
firmware/dmi_scan: drop obsolete comment
This comment predates the introduction of early_ioremap. Since then the
missing calls to dmi_iounmap have been added by Ingo and Yinghai in
commits 0d64484f7ea1 ("x86: fix DMI ioremap leak") and 3212bff370c2f
("x86: left over fix for leak of early_ioremp in dmi_scan") . That was
over 5 years ago so it is about time to drop this now misleading comment.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We observed this problem has been occurring since 2.6.30 with
fs/binfmt_elf.c: create_elf_tables()->get_random_bytes(), introduced by f06295b44c296c8f ("ELF: implement AT_RANDOM for glibc PRNG seeding").
/*
* Generate 16 random bytes for userspace PRNG seeding.
*/
get_random_bytes(k_rand_bytes, sizeof(k_rand_bytes));
The patch introduces a wrapper around get_random_int() which has lower
overhead than calling get_random_bytes() directly.
With this patch applied:
$ cat /proc/sys/kernel/random/entropy_avail
2731
$ cat /proc/sys/kernel/random/entropy_avail
2802
$ cat /proc/sys/kernel/random/entropy_avail
2878
Analyzed by John Sobecki.
Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <aedilger@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnn@arndb.de> Cc: John Sobecki <john.sobecki@oracle.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chuansheng Liu [Thu, 18 Jul 2013 23:56:48 +0000 (09:56 +1000)]
smp: Give WARN()ing when calling smp_call_function_many()/single() in serving irq
Currently the functions smp_call_function_many()/single() will give a
WARN()ing only in the case of irqs_disabled(), but that check is not
enough to guarantee execution of the SMP cross-calls.
In many other cases such as softirq handling/interrupt handling, the two
APIs still can not be called, just as the smp_call_function_many()
comments say:
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler. Preemption
* must be disabled when calling this function.
There is a real case for softirq DEADLOCK case:
CPUA CPUB
spin_lock(&spinlock)
Any irq coming, call the irq handler
irq_exit()
spin_lock_irq(&spinlock)
<== Blocking here due to
CPUB hold it
__do_softirq()
run_timer_softirq()
timer_cb()
call smp_call_function_many()
send IPI interrupt to CPUA
wait_csd()
Then both CPUA and CPUB will be deadlocked here.
So we should give a warning in the nmi, hardirq or softirq context as well.
Moreover, adding one new macro in_serving_irq() which indicates we are
processing nmi, hardirq or sofirq.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Lai Jiangshan <eag0628@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __put_user() calls in compat_ioctl.c, ptrace compat, signal compat,
since those appear in compat code, we could probably expect the kernel
addresses not to be reachable in the lower 32-bit range, so I think they
might not be exploitable.
For the "__get_user" cases, I don't think those are exploitable: the worse
that can happen is that the kernel will copy kernel memory into in-kernel
buffers, and will fail immediately afterward.
The alpha csum_partial_copy_from_user() seems to be missing the
access_ok() check entirely. The fix is inspired from x86. This could
lead to information leak on alpha. I also noticed that many architectures
map csum_partial_copy_from_user() to csum_partial_copy_generic(), but I
wonder if the latter is performing the access checks on every
architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shaohua Li [Thu, 18 Jul 2013 23:56:46 +0000 (09:56 +1000)]
swap: add a simple detector for inappropriate swapin readahead
This is a patch to improve swap readahead algorithm. It's from Hugh and I
slightly changed it.
Hugh's original changelog:
swapin readahead does a blind readahead, whether or not the swapin
is sequential. This may be ok on harddisk, because large reads have
relatively small costs, and if the readahead pages are unneeded they
can be reclaimed easily - though, what if their allocation forced
reclaim of useful pages? But on SSD devices large reads are more
expensive than small ones: if the readahead pages are unneeded,
reading them in caused significant overhead.
This patch adds very simplistic random read detection. Stealing
the PageReadahead technique from Konstantin Khlebnikov's patch,
avoiding the vma/anon_vma sophistications of Shaohua Li's patch,
swapin_nr_pages() simply looks at readahead's current success
rate, and narrows or widens its readahead window accordingly.
There is little science to its heuristic: it's about as stupid
as can be whilst remaining effective.
The table below shows elapsed times (in centiseconds) when running
a single repetitive swapping load across a 1000MB mapping in 900MB
ram with 1GB swap (the harddisk tests had taken painfully too long
when I used mem=500M, but SSD shows similar results for that).
Vanilla is the 3.6-rc7 kernel on which I started; Shaohua denotes
his Sep 3 patch in mmotm and linux-next; HughOld denotes my Oct 1
patch which Shaohua showed to be defective; HughNew this Nov 14
patch, with page_cluster as usual at default of 3 (8-page reads);
HughPC4 this same patch with page_cluster 4 (16-page reads);
HughPC0 with page_cluster 0 (1-page reads: no readahead).
HDD for swapping to harddisk, SSD for swapping to VertexII SSD.
Seq for sequential access to the mapping, cycling five times around;
Rand for the same number of random touches. Anon for a MAP_PRIVATE
anon mapping; Shmem for a MAP_SHARED anon mapping, equivalent to tmpfs.
One weakness of Shaohua's vma/anon_vma approach was that it did
not optimize Shmem: seen below. Konstantin's approach was perhaps
mistuned, 50% slower on Seq: did not compete and is not shown below.
These tests are, of course, two extremes of a very simple case:
under heavier mixed loads I've not yet observed any consistent
improvement or degradation, and wider testing would be welcome.
Shaohua Li:
Test shows Vanilla is slightly better in sequential workload than Hugh's patch.
I observed with Hugh's patch sometimes the readahead size is shrinked too fast
(from 8 to 1 immediately) in sequential workload if there is no hit. And in
such case, continuing doing readahead is good actually.
I don't prepare a sophisticated algorithm for the sequential workload because
so far we can't guarantee sequential accessed pages are swap out sequentially.
So I slightly change Hugh's heuristic - don't shrink readahead size too fast.
Here is my test result (unit second, 3 runs average):
Vanilla Hugh New
Seq 356 370 360
Random 4525 2447 2444
Attached graph is the swapin/swapout throughput I collected with 'vmstat 2'.
The first part is running a random workload (till around 1200 of the x-axis)
and the second part is running a sequential workload. swapin and swapout
throughput are almost identical in steady state in both workloads. These are
expected behavior. while in Vanilla, swapin is much bigger than swapout
especially in random workload (because wrong readahead).
Original patches by: Shaohua Li and Konstantin Khlebnikov.
Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Locking head page means locking entire compound page. If we try to lock
tail page, something went wrong.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Hansen [Thu, 18 Jul 2013 23:56:46 +0000 (09:56 +1000)]
mm: vmstats: tlb flush counters
I was investigating some TLB flush scaling issues and realized that we do
not have any good methods for figuring out how many TLB flushes we are
doing.
It would be nice to be able to do these in generic code, but the
arch-independent calls don't explicitly specify whether we actually need
to do remote flushes or not. In the end, we really need to know if we
actually _did_ global vs. local invalidations, so that leaves us with few
options other than to muck with the counters from arch-specific code.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- unindent most code of the function by inverting one condition;
- streamline code no-error path;
- move insert error path outside normal code path;
- call radix_tree_preload_end() earlier;
No functional changes.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hillf Danton <dhillf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
thp: account anon transparent huge pages into NR_ANON_PAGES
We use NR_ANON_PAGES as base for reporting AnonPages to user. There's not
much sense in not accounting transparent huge pages there, but add them on
printing to user.
Let's account transparent huge pages in NR_ANON_PAGES in the first place.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hillf Danton <dhillf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox [Thu, 18 Jul 2013 23:56:43 +0000 (09:56 +1000)]
mm: drop actor argument of do_shmem_file_read()
There's only one caller of do_shmem_file_read() and the only actor is
file_read_actor(). No reason to have a callback parameter.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's only one caller of do_generic_file_read() and the only actor is
file_read_actor(). No reason to have a callback parameter.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/zswap.c: get swapper address_space by using macro
There is a proper macro to get the corresponding swapper address space
from a swap entry. Instead of directly accessing "swapper_spaces" array,
use the "swap_address_space" macro.
Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: mmap_region: kill correct_wcount/inode, use allow_write_access()
correct_wcount and inode in mmap_region() just complicate the code. This
boolean was needed previously, when deny_write_access() was called before
vma_merge(), now we can simply check VM_DENYWRITE and do
allow_write_access() if it is set.
allow_write_access() checks file != NULL, so this is safe even if it was
possible to use VM_DENYWRITE && !file. Just we need to ensure we use the
same file which was deny_write_access()'ed, so the patch also moves "file
= vma->vm_file" down after allow_write_access().
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Colin Cross <ccross@android.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: shift VM_GROWS* check from mmap_region() to do_mmap_pgoff()
mmap() doesn't allow the non-anonymous mappings with VM_GROWS* bit set.
In particular this means that mmap_region()->vma_merge(file, vm_flags)
must always fail if vm_flags & VM_GROWS. So it does not make sense to
check VM_GROWS* after we already allocated the new vma, the only caller,
do_mmap_pgoff(), which can pass this flag can do the check itself.
And this looks a bit more correct, mmap_region() already unmapped the old
mapping at this stage. But if mmap() is going to fail, it should avoid
do_munmap() if possible.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Colin Cross <ccross@android.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/swapfile.c: In function 'read_swap_header':
mm/swapfile.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type '__u32'
Cc: Hugh Dickins <hughd@google.com> Cc: Raymond Jennings <shentino@gmail.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vladimir Cernov [Thu, 18 Jul 2013 23:56:41 +0000 (09:56 +1000)]
mm/madvise.c: fix coding-style errors
This fixes following errors:
- ERROR: "(foo*)" should be "(foo *)"
- ERROR: "foo ** bar" should be "foo **bar"
Signed-off-by: Vladimir Cernov <gg.kaspersky@gmail.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: mempolicy: turn vma_set_policy() into vma_dup_policy()
Simple cleanup. Every user of vma_set_policy() does the same work,
this looks a bit annoying imho. And the new trivial helper which
does mpol_dup() + vma_set_policy() to simplify the callers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The ARM OABI and EABI disagree on the alignment of structures with small
members, so module init tools may interpret the ssb device table
incorrectly, as shown by this warning when building the b43 device driver
in an OABI kernel:
FATAL: drivers/net/wireless/b43/b43: sizeof(struct ssb_device_id)=6 is not
a modulo of the size of section __mod_ssb_device_table=88.
Forcing the default (EABI) alignment on the structure makes this problem
go away. Since the ssb_device_id may have the same problem, better fix
both structures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: John W. Linville <linville@tuxdriver.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
watchdog: trigger all-cpu backtrace when locked up and going to panic
Send an NMI to all CPUs when a lockup is detected and the lockup watchdog
code is configured to panic. This gives us a fairly uptodate snapshot of
all CPUs in the system.
This lets us get stack trace of all CPUs which makes life easier trying to
debug a deadlock, and the NMI doesn't change anything since the next step
is a kernel panic.
block: restore /proc/partitions to not display non-partitionable removable devices
We found with newer kernels we started seeing the cdrom device showing
up in /proc/partitions, but it was not there before.
Looking into this I found that commit d27769ec ("block: add
GENHD_FL_NO_PART_SCAN") introduces this change in behavior. It's not
clear to me from the commit's changelog if this change was intentional or
not. This comment still remains: /* Don't show non-partitionable
removeable devices or empty devices */ so I've decided to send a patch to
restore the behavior of not printing unpartitionable removable devices.
Signed-off-by: Josh Hunt <johunt@akamai.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
lglock: update lockdep annotations to report recursive local locks
Oleg Nesterov recently noticed that the lockdep annotations in lglock.c
are not sufficient to detect some obvious deadlocks, such as
lg_local_lock(LOCK) + lg_local_lock(LOCK) or spin_lock(X) +
lg_local_lock(Y) vs lg_local_lock(Y) + spin_lock(X).
Both issues are easily fixed by indicating to lockdep that lglock's local
locks are not recursive. We shouldn't use the rwlock acquire/release
functions here, as lglock doesn't share the same semantics. Instead we
can base our lockdep annotations on the lock_acquire_shared (for local
lglock) and lock_acquire_exclusive (for global lglock) helpers.
I am not proposing new lglock specific helpers as I don't see the point of
the existing second level of helpers :)
Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@linux.intel.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In lockdep.h, the spinlock/mutex/rwsem/rwlock/lock_map acquire macros have
different definitions based on the value of CONFIG_PROVE_LOCKING. We have
separate ifdefs for each of these definitions, which seems redundant.
Introduce lock_acquire_{exclusive,shared,shared_recursive} helpers which
will have different definitions based on CONFIG_PROVE_LOCKING. Then all
other helper macros can be defined based on the above ones, which reduces
the amount of ifdefined code.
Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@linux.intel.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Junxiao Bi [Thu, 18 Jul 2013 23:56:36 +0000 (09:56 +1000)]
ocfs2: update inode size after zeronig the hole
fs-writeback will release the dirty pages without page lock whose offset
are over inode size, the release happens at block_write_full_page_endio().
If not update, dirty pages in file holes may be released before flushed
to the disk, then file holes will contain some non-zero data, this will
cause sparse file md5sum error.
To reproduce the bug, find a big sparse file with many holes, like vm
image file, its actual size should be bigger than available mem size to
make writeback work more frequently, tar it with -S option, then keep
untar it and check its md5sum again and again until you get a wrong
md5sum.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Younger Liu <younger.liu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Compared with PATCH V1, bug description is updated, and pointless comments
are removed.
Signed-off-by: Younger Liu <younger.liu@huawei.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Jensen <shencanquan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Younger Liu [Thu, 18 Jul 2013 23:56:35 +0000 (09:56 +1000)]
ocfs2: fix issue that ocfs2_setattr() does not deal with new_i_size==i_size
The issue scenario is as following:
- Create a small file and fallocate a large disk space for a file with
FALLOC_FL_KEEP_SIZE option.
- ftruncate the file back to the original size again. but the disk free
space is not changed back. This is a real bug that be fixed in this
patch.
In order to solve the issue above, we modified ocfs2_setattr(), if
attr->ia_size != i_size_read(inode), It calls ocfs2_truncate_file(), and
truncate disk space to attr->ia_size.
Signed-off-by: Younger Liu <younger.liu@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Tested-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Reviewed-by: Jensen <shencanquan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: llseek requires ocfs2 inode lock for the file in SEEK_END
llseek requires ocfs2 inode lock for updating the file size in SEEK_END.
because the file size maybe update on another node.
This bug can be reproduce the following scenario: at first, we dd a test
fileA, the file size is 10k.
on NodeA:
---------
1) open the test fileA, lseek the end of file. and print the position.
2) close the test fileA
on NodeB:
1) open the test fileA, append the 5k data to test FileA.
2) lseek the end of file. and print the position.
3) close file.
At first we run the test program1 on NodeA , the result is 10k. And then
run the test program2 on NodeB, the result is 15k. At last, we run the
test program1 on NodeA again, the result is 10k.
After applying this patch the three step result is 15k.
Signed-off-by: Jensen <shencanquan@huawei.com> Cc: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Younger Liu [Thu, 18 Jul 2013 23:56:35 +0000 (09:56 +1000)]
ocfs2: should call ocfs2_journal_access_di() before ocfs2_delete_entry() in ocfs2_orphan_del()
While deleting a file into orphan dir in ocfs2_orphan_del(), it calls
ocfs2_delete_entry() before ocfs2_journal_access_di(). If
ocfs2_delete_entry() succeeded and ocfs2_journal_access_di() failed, there
would be a inconsistency: the file is deleted from orphan dir, but orphan
dir dinode is not updated.
So we need to call ocfs2_journal_access_di() before ocfs2_orphan_del().
Signed-off-by: Younger Liu <younger.liu@huawei.com> Reviewed-by: Jensen <shencanquan@huawei.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid unneeded local string buffers for constructing debug output. Also
cleans up debug calls that contain a single parameter so that they cannot
be accidentally parsed as format strings.
Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jeff Mahoney [Thu, 18 Jul 2013 23:56:34 +0000 (09:56 +1000)]
mISDN: add support for group membership check
This patch adds a module parameter to allow a group access to the mISDN
devices. Otherwise, unpriviledged users on systems with ISDN hardware
have the ability to dial out, potentially causing expensive bills.
Based on a different implementation by Patrick Koppen.
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Jeff Mahoney <jeffm@suse.com> Cc: Patrick Koppen <isdn4linux@koppen.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Olaf Hering [Thu, 18 Jul 2013 23:56:33 +0000 (09:56 +1000)]
drivers/net/ethernet/ibm/ehea/ehea_main.c: add alias entry for portN properties
Use separate table for alias entries in the ehea module, otherwise the
probe() function will operate on the separate ports instead of the
lhea-"root" entry of the device-tree
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Olaf Hering <ohering@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/mtd/chips/gen_probe.c: refactor call to request_module()
This reduces the size of the stack frame when calling request_module().
Performing the sprintf before the call is not needed.
Signed-off-by: Kees Cook <keescook@chromium.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/infiniband/core/cm.c: convert to using idr_alloc_cyclic()
commit 3e6628c4b347 ("idr: introduce idr_alloc_cyclic()") adds a new
idr_alloc_cyclic routine and converts several of these users to it. This
is just a missed one - add it.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Cc: Roland Dreier <roland@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hrtimer: one more expiry time overflow check in hrtimer_interrupt
When executing a date command to set the system date and time to a few
seconds before the 2038 problem expiration time, we got a WARN_ON_ONCE()
like this:
root@renesas:~# date -s "2038-1-19 3:14:00"
Tue Jan 19 03:14:00 GMT 2038
(then wait for 7-8 seconds)
root@renesas:~# [ 27.662658] ------------[ cut here ]------------
[ 27.667297] WARNING: at kernel/time/clockevents.c:209 clockevents_program_event+0x3c/0x138()
[ 27.675720] Modules linked in:
[ 27.678802] [<c00130ec>] (unwind_backtrace+0x0/0xe0) from [<c001f4d8>] (warn_slowpath_common+0x4c/0x64)
[ 27.688201] [<c001f4d8>] (warn_slowpath_common+0x4c/0x64) from [<c001f508>] (warn_slowpath_null+0x18/0x1c)
[ 27.697845] [<c001f508>] (warn_slowpath_null+0x18/0x1c) from [<c00549bc>] (clockevents_program_event+0x3c/0x138)
[ 27.708007] [<c00549bc>] (clockevents_program_event+0x3c/0x138) from [<c005510c>] (tick_program_event+0x2c/0x34)
[ 27.718170] [<c005510c>] (tick_program_event+0x2c/0x34) from [<c003fa98>] (hrtimer_interrupt+0x268/0x2a8)
[ 27.727752] [<c003fa98>] (hrtimer_interrupt+0x268/0x2a8) from [<c00180c8>] (cmt_timer_interrupt+0x2c/0x34)
[ 27.737396] [<c00180c8>] (cmt_timer_interrupt+0x2c/0x34) from [<c0066748>] (handle_irq_event_percpu+0xb0/0x2a8)
[ 27.747467] [<c0066748>] (handle_irq_event_percpu+0xb0/0x2a8) from [<c0066998>] (handle_irq_event+0x58/0x74)
[ 27.757293] [<c0066998>] (handle_irq_event+0x58/0x74) from [<c0068f24>] (handle_fasteoi_irq+0xc0/0x148)
[ 27.766662] [<c0068f24>] (handle_fasteoi_irq+0xc0/0x148) from [<c0066014>] (generic_handle_irq+0x20/0x30)
[ 27.776245] [<c0066014>] (generic_handle_irq+0x20/0x30) from [<c000ef54>] (handle_IRQ+0x60/0x84)
[ 27.785003] [<c000ef54>] (handle_IRQ+0x60/0x84) from [<c0009334>] (gic_handle_irq+0x34/0x4c)
[ 27.793426] [<c0009334>] (gic_handle_irq+0x34/0x4c) from [<c000e2c0>] (__irq_svc+0x40/0x70)
[ 27.801788] Exception stack(0xc04aff68 to 0xc04affb0)
[ 27.806823] ff60: 00000000f01000000000000100000000c04ae000c04ec388
[ 27.815002] ff80: c04b604cc0840d8040004059412fc0930000000000000000c04ce140c04affb0
[ 27.823150] ffa0: c000f064c000f06860000013ffffffff
[ 27.828216] [<c000e2c0>] (__irq_svc+0x40/0x70) from [<c000f068>] (default_idle+0x24/0x2c)
[ 27.836395] [<c000f068>] (default_idle+0x24/0x2c) from [<c000f338>] (cpu_idle+0x74/0xc8)
[ 27.844451] [<c000f338>] (cpu_idle+0x74/0xc8) from [<c048c6d4>] (start_kernel+0x248/0x288)
[ 27.852722] ---[ end trace 9d8ad385bde80fd3 ]---
[ 27.857330] hrtimer: interrupt took 0 ns
This is triggered with our v3.4-based custom ARM kernel, but we confirmed
that v3.10-rc can still have the same problem.
I found a similar issue fixed in v3.9 by Prarit Bhargava in commit 8f294b5a13 ("hrtimer: Add expiry time overflow check in
hrtimer_interrupt", 2013-04-08). It tried to resolve a overflow issue
detected around 1970 + 100 seconds.
On the other hand, we have another call site of tick_program_event() at
the bottom of hrtimer_interrupt(). The warning this time is triggered
there, so we need to apply the same fix to it.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chen Gang [Thu, 18 Jul 2013 23:56:32 +0000 (09:56 +1000)]
include/linux/interrupt.h: add dummy irq_set_irq_wake() for "!GENERIC_HARDIRQS"
Since irq_set_irq_wake() has already declared in header file, when
GENERIC_HARDIRQS enabled.
Recommend to define the dummy one for GENERIC_HARDIRQS disabled, and also
let the other related "static inline" functions are independent from
GENERIC_HARDIRQS.
So can avoid the compiling error below, and also let the code simpler
and clearer.
The related compiling error (ARCH=s390 allmodconfig):
sound/soc/codecs/wm0010.c: In function \91wm0010_spi_probe\92:
sound/soc/codecs/wm0010.c:976:2: error: implicit declaration of function \91irq_set_irq_wake\92 [-Werror=implicit-function-declaration]
Signed-off-by: Chen Gang <gang.chen@asianux.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ondrej Zary [Thu, 18 Jul 2013 23:56:31 +0000 (09:56 +1000)]
cyber2000fb: avoid palette corruption at higher clocks
When 1280x1024@75Hz mode is set, console palette is not set properly -
sometimes the background is white, sometimes yellow and text colors are
also messed up. This does not happen at 1280x1024@60Hz and below.
It seems that the HW needs some time before setting the palette - maybe
the PLL needs more time to lock at higher speeds. This patch fixes the
problem but without knowing what register to check for PLL lock(?), the
delay might be excessive.
On Fri, 28 Jan 2011 18:15:37 +0000
Russell King <rmk@arm.linux.org.uk> wrote:
> On Tue, Jan 18, 2011 at 01:14:24PM -0800, Andrew Morton wrote:
> > Russell, I have an (old) note here that this is awaiting an ack from
> > yourself?
>
> Well, I can reproduce this problem on the Netwinders here. I'm not sure
> that we should delay all mode switches by one second - and any attempt
> to reduce this value does result in the palette not being set correctly.
>
> For 1280x1024-75, the dotclock is 135MHz, which gives a PLL values of
> 0x41 and 0x06. That's: M=0x41+1, N=0x06+1, P=0x00 (top 2 bits of 0x06)
> -> Q=1
>
> Fpll = 14.31818MHz * M / N
> Fout = Fpll / Q
>
> The PLL itself is formed by dividing the 14-ish MHz frequency by N and
> phase comparing the output of the VCO, divided by M, and adjusting the
> VCO until the two correlate. As VCOs typically tend to have a limited
> range, it's normal to divide the output frequency to produce a greater
> range - and in this case that's done by Q.
>
> For the 800x600-100 copied from /etc/fb.modes, this has a dotclock of
> 67.5MHz, which is exactly half this rate. The PLL values for this are:
> M=0x41+1, N=0x06+1, P=0x01, giving PLL values of 0x41 and 0x46.
>
> Booting with 800x600-100 does not suffer the problem. So it's not
> related to PLL lock time. There's something else going on.
>
> Another experiment I tried was forcing the PLL values to produce 108MHz
> instead of 135MHz. 108MHz is the dotclock for 1280x1024-60. This too
> doesn't suffer the problem.
>
> I've also tried chosing other delay values. 100ms is too short and
> produces the problem, but 1s works. 1s for a PLL to lock is a hell of
> a time, especially for a PLL operating in the MHz range.
>
> I've tried setting the PLL to a known good freqency, and then switching
> to 135MHz - the problem persists. It's not like 135MHz is reaching the
> limits - it'll go up to 206MHz.
>
> So, I don't think this has anything to do with PLL locking. I think
> there's something else going on which isn't immediately obvious - maybe
> bandwidth starvation preventing us from writing properly to the palette?
> As it's a horrible VGA, where you write the same register multiple times
> I wouldn't be surprised if some writes were going missing.
>
> I'll see if I can play around with it some more this evening, but I've
> spent an awful long time on just this issue already this afternoon...
>
> I think further investigation needs to happen on this patch before it's
> acceptable. Or maybe we should prevent the cyberpro coming up in
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Paul Bolle [Thu, 18 Jul 2013 23:56:31 +0000 (09:56 +1000)]
drivers/video/acornfb.c: remove dead code
acornfb checks for HAS_VIDC while support for that macro was removed in
v2.6.23 (when the arm26 port was removed). So we can remove a bit of dead
code.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jeff Mahoney [Thu, 18 Jul 2013 23:56:30 +0000 (09:56 +1000)]
drm/nouveau: make vga_switcheroo code depend on VGA_SWITCHEROO
Commit 8116188fdef594 ("nouveau/acpi: hook up to the MXM method for mux
switching.") broke the build on non-x86 architectures due to the new
dependency on MXM and MXM being an x86 platform driver.
It built previously since the vga switcheroo registration routines were
zereod out on !X86. The code was built in but unused.
This patch makes all of the DSM code depend on CONFIG_VGA_SWITCHEROO,
allowing it to build on non-x86 and shrinking the module size as well.
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the mode is set with 16bpp on QEMU, the output gets totally broken.
The culprit is the bogus register values set for 16bpp, which was likely
copied from from a wrong place.
Daniel Vetter [Thu, 18 Jul 2013 23:56:30 +0000 (09:56 +1000)]
drm/fb-helper: don't sleep for screen unblank when an oops is in progress
Otherwise the system will burn even brighter and worse, leave the user
wondering what's going on exactly.
Since we already have a panic handler which will (try) to restore the
entire fbdev console mode, we can just bail out. Inspired by a patch from
Konstantin Khlebnikov. The callchain leading to this, cut&pasted from
Konstantin's original patch:
Note that the entire locking in the fb helper around panic/sysrq and kdbg
is ... non-existant. So we have a decent change of blowing up
everything. But since reworking this ties in with funny concepts like the
fbdev notifier chain or the impressive things which happen around
console_lock while oopsing, I'll leave that as an exercise for braver
souls than me.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current mem boot option only can work for non efi environment. If the
user specifies add_efi_memmap, it cannot work for efi environment. In the
efi environment, we call e820_add_region() to add the memory map. So we
can modify __e820_add_region() and the mem boot option can work for efi
environment.
Note: Only E820_RAM is limited, and BOOT_SERVICES_{CODE,DATA} are always
mapped(If its address >= mem_limit, the memory won't be freed in
efi_free_boot_services()).
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Rob Landley <rob@landley.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 18 Jul 2013 23:56:28 +0000 (09:56 +1000)]
printk: rename struct log to struct printk_log
Rename the struct to enable moving portions of
printk.c to separate files.
The rename changes output of /proc/vmcoreinfo.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 18 Jul 2013 23:56:28 +0000 (09:56 +1000)]
printk: use pointer for console_cmdline indexing
Make the code a bit more compact by always using a pointer for the active
console_cmdline.
Move overly indented code to correct indent level.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 18 Jul 2013 23:56:28 +0000 (09:56 +1000)]
printk: move braille console support into separate braille.[ch] files
Create files with prototypes and static inlines for braille support. Make
braille_console functions return 1 on success.
Corrected CONFIG_A11Y_BRAILLE_CONSOLE=n _braille_console_setup
return value to NULL.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 18 Jul 2013 23:56:27 +0000 (09:56 +1000)]
printk: add console_cmdline.h
Add an include file for the console_cmdline struct so that the braille
console driver can be separated.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 18 Jul 2013 23:56:27 +0000 (09:56 +1000)]
printk: move to separate directory for easier modification
Make it easier to break up printk into bite-sized chunks.
Remove printk path/filename from comment.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Martin Nordholts [Thu, 18 Jul 2013 23:56:27 +0000 (09:56 +1000)]
Documentation/development-process/: update -mm and -next URLs
Both old URLs are broken, so update them.
Signed-off-by: Martin Nordholts <enselic@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zbud_alloc() incorrectly verifies the size of allocation limit. It should
deny the allocation request greater than (PAGE_SIZE - ZHDR_SIZE_ALIGNED -
CHUNK_SIZE), not (PAGE_SIZE - ZHDR_SIZE_ALIGNED) which has no remaining
spaces for its buddy. There is no point in spending the entire zbud page
storing only a single page, since we don't have any benefits.
Signed-off-by: Heesub Shin <heesub.shin@samsung.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunae Seo <sunae.seo@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Steven Rostedt [Thu, 18 Jul 2013 23:56:26 +0000 (09:56 +1000)]
drivers/thermal/x86_pkg_temp_thermal.c: fix lockup of cpu_down()
Commit f1a18a105 ("Thermal: CPU Package temperature thermal") had code
that did a get_online_cpus(), run a loop and then do a put_online_cpus().
The problem is that the loop had an error exit that would skip the
put_online_cpus() part.
In the error exit part of the function, it also did a get_online_cpus(),
run a loop and then put_online_cpus(). The only way to get to the error
exit part is with get_online_cpus() already performed. If this error
condition is hit, the system will be prevented from taking CPUs offline.
The process taking the CPU offline will lock up hard.
Removing the get_online_cpus() removes the lockup as the hotplug CPU
refcount is back to zero.
This was bisected with ktest.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
thp, mm: avoid PageUnevictable on active/inactive lru lists
active/inactive lru lists can contain unevicable pages (i.e. ramfs pages
that have been placed on the LRU lists when first allocated), but these
pages must not have PageUnevictable set - otherwise shrink_[in]active_list
goes crazy:
kernel BUG at /home/space/kas/git/public/linux-next/mm/vmscan.c:1122!
__isolate_lru_page() returns EINVAL for PageUnevictable(page).
For lru_add_page_tail(), it means we should not set PageUnevictable() for
tail pages unless we're sure that it will go to LRU_UNEVICTABLE. Let's
just copy PG_active and PG_unevictable from head page in
__split_huge_page_refcount(), it will simplify lru_add_page_tail().
This will fix one more bug in lru_add_page_tail(): if
page_evictable(page_tail) is false and PageLRU(page) is true, page_tail
will go to the same lru as page, but nobody cares to sync page_tail
active/inactive state with page. So we can end up with inactive page on
active lru. The patch will fix it as well since we copy PG_active from
head page.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/swap.c: clear PageActive before adding pages onto unevictable list
As a result of v3.10-3600-g13f7f78 ("mm: pagevec: defer deciding which LRU
to add a page to until pagevec drain time"), pages on unevictable lists
can have both of PageActive and PageUnevictable set. This is not only
confusing, but also corrupts page migration and shrink_[in]active_list.
This patch fixes the problem by adding ClearPageActive before adding pages
into unevictable list. It also cleans up VM_BUG_ONs.
Andrew Morton [Thu, 18 Jul 2013 23:56:25 +0000 (09:56 +1000)]
arch/x86/platform/ce4100/ce4100.c: include reboot.h
arch/x86/platform/ce4100/ce4100.c: In function 'x86_ce4100_early_setup':
arch/x86/platform/ce4100/ce4100.c:165:2: error: 'reboot_type' undeclared (first use in this function)
Reported-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Kleikamp [Thu, 18 Jul 2013 23:56:25 +0000 (09:56 +1000)]
mm: sched: numa: fix NUMA balancing when !SCHED_DEBUG
3105b86a ("mm: sched: numa: Control enabling and disabling of NUMA
balancing if !SCHED_DEBUG") defined numabalancing_enabled to control the
enabling and disabling of automatic NUMA balancing, but it is never used.
I believe the intention was to use this in place of sched_feat_numa(NUMA).
Currently, if SCHED_DEBUG is not defined, sched_feat_numa(NUMA) will never
be changed from the initial "false".
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Thu, 18 Jul 2013 23:56:25 +0000 (09:56 +1000)]
rapidio: fix use after free in rio_unregister_scan()
We're freeing the list iterator so we can't move to the next entry. Since
there is only one matching mport_id, we can just break after finding it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that lz4 kernel compression is available, add *.lz4 to .gitignore.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ben Hutchings [Thu, 18 Jul 2013 23:56:24 +0000 (09:56 +1000)]
dmi_scan: add comments on dmi_present() and the loop in dmi_scan_machine()
My previous refactoring in 79bae42d51a5 ("dmi_scan: refactor
dmi_scan_machine(), {smbios,dmi}_present()") resulted in slightly tricky
code (though I think it's more elegant). Explain what it's doing.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Thu, 18 Jul 2013 23:56:22 +0000 (09:56 +1000)]
include/linux/smp.h:on_each_cpu(): switch back to a C function
Revert c846ef7deba2d4f751 ("include/linux/smp.h:on_each_cpu(): switch back
to a macro"). It turns out that the problematic linux/irqflags.h include
was fixed within ia64 and mn10300.
Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg KH:
"Here are some driver core patches for 3.11-rc2. They aren't really
bugfixes, but a bunch of new helper macros for drivers to properly
create attribute groups, which drivers and subsystems need to fix up a
ton of race issues with incorrectly creating sysfs files (binary and
normal) after userspace has been told that the device is present.
Also here is the ability to create binary files as attribute groups,
to solve that race condition, which was impossible to do before this,
so that's my fault the drivers were broken.
The majority of the .c changes is indenting and moving code around a
bit. It affects no existing code, but allows the large backlog of 70+
patches that I already have created to start flowing into the
different subtrees, instead of having to live in my driver-core tree,
causing merge nightmares in linux-next for the next few months.
These were finalized too late for the -rc1 merge window, which is why
they were didn't make that pull request, testing and review from
others didn't happen until a few weeks ago, and then there's the whole
distraction of the past few days, which prevented these from getting
to you sooner, sorry about that.
Oh, and there's a bugfix for the documentation build warning in here
as well. All of these have been in linux-next this week, with no
reported problems"
* tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver-core: fix new kernel-doc warning in base/platform.c
sysfs: use file mode defines from stat.h
sysfs: add more helper macro's for (bin_)attribute(_groups)
driver core: add default groups to struct class
driver core: Introduce device_create_groups
sysfs: prevent warning when only using binary attributes
sysfs: add support for binary attributes in groups
driver core: device.h: add RW and RO attribute macros
sysfs.h: add BIN_ATTR macro
sysfs.h: add ATTRIBUTE_GROUPS() macro
sysfs.h: add __ATTR_RW() macro
Merge branch 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull phase two of __cpuinit removal from Paul Gortmaker:
"With the __cpuinit infrastructure removed earlier, this group of
commits only removes the function/data tagging that was done with the
various (now no-op) __cpuinit related prefixes.
Now that the dust has settled with yesterday's v3.11-rc1, there
hopefully shouldn't be any new users leaking back in tree, but I think
we can leave the harmless no-op stubs there for a release as a
courtesy to those who still have out of tree stuff and weren't paying
attention.
Although the commits are against the recent tag to allow for minor
context refreshes for things like yesterday's v3.11-rc1~ slab content,
the patches have been largely unchanged for weeks, aside from such
trivial updates.
For detail junkies, the largely boring and mostly irrelevant history
of the patches can be viewed at:
If nothing else, I guess it does at least demonstrate the level of
involvement required to shepherd such a treewide change to completion.
This is the same repository of patches that has been applied to the
end of the daily linux-next branches for the past several weeks"
* 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits)
block: delete __cpuinit usage from all block files
drivers: delete __cpuinit usage from all remaining drivers files
kernel: delete __cpuinit usage from all core kernel files
rcu: delete __cpuinit usage from all rcu files
net: delete __cpuinit usage from all net files
acpi: delete __cpuinit usage from all acpi files
hwmon: delete __cpuinit usage from all hwmon files
cpufreq: delete __cpuinit usage from all cpufreq files
clocksource+irqchip: delete __cpuinit usage from all related files
x86: delete __cpuinit usage from all x86 files
score: delete __cpuinit usage from all score files
xtensa: delete __cpuinit usage from all xtensa files
openrisc: delete __cpuinit usage from all openrisc files
m32r: delete __cpuinit usage from all m32r files
hexagon: delete __cpuinit usage from all hexagon files
frv: delete __cpuinit usage from all frv files
cris: delete __cpuinit usage from all cris files
metag: delete __cpuinit usage from all metag files
tile: delete __cpuinit usage from all tile files
sh: delete __cpuinit usage from all sh files
...
Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Except for a slightly big OMAP changes, all rest are small, mostly
boring changes; all either 3.11 regression fixes or stable materials.
- ASoC OMAP fixes due to non-DT OMAP4 removals
- Other ASoC driver changes (sglt5000, wm8978, wm8948, samsung)
- Fix missing locking for snd_pcm_stop() calls in many drivers
- Fix the blocking request_module() in OSS sequencer
- Fix old OSS vwsnd driver builds
- Add a new HD-audio HDMI codec ID"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: seq-oss: Initialize MIDI clients asynchronously
ALSA: hda - Add new GPU codec ID to snd-hda
staging: line6: Fix unlocked snd_pcm_stop() call
[media] saa7134: Fix unlocked snd_pcm_stop() call
ASoC: s6000: Fix unlocked snd_pcm_stop() call
ASoC: atmel: Fix unlocked snd_pcm_stop() call
ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call
ALSA: usx2y: Fix unlocked snd_pcm_stop() call
ALSA: ua101: Fix unlocked snd_pcm_stop() call
ALSA: 6fire: Fix unlocked snd_pcm_stop() call
ALSA: atiixp: Fix unlocked snd_pcm_stop() call
ALSA: asihpi: Fix unlocked snd_pcm_stop() call
sound: oss/vwsnd: Always define vwsnd_mutex
sound: oss/vwsnd: Add missing inclusion of linux/delay.h
ASoC: wm8978: enable symmetric rates
ASoC: omap-mcbsp: Use different method for DMA request when booted with DT
ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMA
ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMA
ASoC: omap-pcm: Request the DMA channel differently when DT is involved
ASoC: Samsung: Set RFS and BFS in slave mode
...
projects / karo-tx-linux.git / log