Olof Johansson [Sat, 1 Jun 2013 07:38:04 +0000 (00:38 -0700)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre:
Big DT-centric update for AT91:
- Calao boards update, removal of one board C file and
associated defconfig, Kconfig Makefile lines
- several Acme boards updates
- addition of watchdog, uart and pinctrl descriptions for
several products
- modification of RTC compatible string for 9x5 family
* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits)
ARM: at91/dt: add pinctrl definition for at91 tc blocks
ARM: at91/dts: add the watchdog nodes for at91 boards
ARM: at91/dtsi: add the watchdog nodes for at91 SoC
ARM: at91: drop non DT: Calao USB-A96x
ARM: at91: dt: add Calao USB-A9G20 low power version
ARM: at91: dt: usb-a9263: add dataflash support
ARM: at91: dt: usb-a9263: update shutdown controller
ARM: at91: dt: usb-a9260: update shutdown controller
ARM: at91: dt: sam9260: add i2c gpio pinctrl
ARM: at91: switch Fox G20 board .dts to pre-processor defines
ARM: at91: add Acme Systems Fox G20 board
ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled
ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes
ARM: at91/at91-ariag25.dts: add RTC node
ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one
ARM: at91: udpate defconfigs
ARM: at91: dt: switch to standard IRQ flag defines
ARM: at91: dt: switch to pinctrl to pre-processor
ARM: at91: dt: add pinctrl pre-processor define
ARM: at91: dt: switch to standard GPIO flag defines.
...
Arnd Bergmann [Fri, 31 May 2013 15:49:28 +0000 (17:49 +0200)]
ARM: nomadik: fix clocksource warning
The clocksource API has changed slightly, which causes a harmless
warning:
/git/arm-soc/drivers/clocksource/nomadik-mtu.c:259:28: warning: 'nmdk_timer_match' defined but not used [-Wunused-variable]
static struct of_device_id nmdk_timer_match[] __initconst = {
^
Fortunately, the same API change also lets us simplify the code
while removing the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 1 Jun 2013 06:41:41 +0000 (23:41 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
ARM: vexpress: Select multi-cluster SMP operation if required
ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
ARM: vexpress: introduce DCSCB support
ARM: introduce common set_auxcr/get_auxcr functions
drivers/bus: arm-cci: function to enable CCI ports from early boot code
drivers: bus: add ARM CCI support
ARM: Enable selection of SMP operations at boot time
arm: introduce psci_smp_ops
ARM: ARMv7-M: implement read_cpuid_ext
ARM: ARMv7-M: Allow the building of new kernel port
ARM: ARMv7-M: Add support for exception handling
ARM: Add base support for ARMv7-M
Olof Johansson [Sat, 1 Jun 2013 06:39:35 +0000 (23:39 -0700)]
Merge branch 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux into next/soc
From Nicolas Pitre:
This is the first MCPM backend submission for VExpress running on RTSM
aka Fast Models implementing the big.LITTLE system architecture. This
enables SMP secondary boot as well as CPU hotplug on this platform.
A big prerequisite for this support is the CCI driver from Lorenzo
included in this pull request.
Also included is Rob Herring's set_auxcr/get_auxcr allowing nicer code.
Signed-off-by: Olof Johansson <olof@lixom.net>
* 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux:
ARM: vexpress: Select multi-cluster SMP operation if required
ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
ARM: vexpress: introduce DCSCB support
ARM: introduce common set_auxcr/get_auxcr functions
drivers/bus: arm-cci: function to enable CCI ports from early boot code
drivers: bus: add ARM CCI support
Olof Johansson [Sat, 1 Jun 2013 06:37:22 +0000 (23:37 -0700)]
Merge branch 'depends/rmk-devel-stable' into next/soc
Pulling in base dependencies from rmk's devel-stable branch needed by the
CCI patches for vexpress.
Signed-off-by: Olof Johansson <olof@lixom.net>
* depends/rmk-devel-stable:
ARM: Enable selection of SMP operations at boot time
arm: introduce psci_smp_ops
ARM: ARMv7-M: implement read_cpuid_ext
ARM: ARMv7-M: Allow the building of new kernel port
ARM: ARMv7-M: Add support for exception handling
ARM: Add base support for ARMv7-M
Olof Johansson [Sat, 1 Jun 2013 06:21:13 +0000 (23:21 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
pci: mvebu: fix the emulation of the status register
pci: mvebu: allow the enumeration of devices beyond physical bridges
pci: mvebu: no longer fake the slot location of downstream devices
Olof Johansson [Sat, 1 Jun 2013 06:20:52 +0000 (23:20 -0700)]
Merge tag 'pcie_bridge-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu pcie driver (bridge) for v3.11
- mvebu
- allow enumeration of devices beyond physical bridges
- remove faking the slot location
- fix status register emulation
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'pcie_bridge-3.11' of git://git.infradead.org/users/jcooper/linux:
pci: mvebu: fix the emulation of the status register
pci: mvebu: allow the enumeration of devices beyond physical bridges
pci: mvebu: no longer fake the slot location of downstream devices
Olof Johansson [Sat, 1 Jun 2013 06:19:45 +0000 (23:19 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree
arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface
arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface
arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface
arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface
arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces
arm: kirkwood: move PCIe window init to legacy driver
pci: mvebu: enable driver usage on Kirkwood
Olof Johansson [Sat, 1 Jun 2013 06:17:39 +0000 (23:17 -0700)]
Merge tag 'pcie_kw-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu pcie driver (kirkwood) for v3.11
- kirkwood
- enable pcie driver
- migrate boards over to pcie dt init
depends
- mvebu/pcie
- mvebu/of_pci
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'pcie_kw-3.11' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree
arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface
arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface
arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface
arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface
arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces
arm: kirkwood: move PCIe window init to legacy driver
pci: mvebu: enable driver usage on Kirkwood
Olof Johansson [Sat, 1 Jun 2013 06:14:21 +0000 (23:14 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
pci: mvebu: fix return value check in mvebu_pcie_probe()
arm: mvebu: PCIe support is now available on mvebu
pci: PCIe driver for Marvell Armada 370/XP systems
clk: mvebu: add more PCIe clocks for Armada XP
clk: mvebu: create parent-child relation for PCIe clocks on Armada 370
Olof Johansson [Sat, 1 Jun 2013 06:13:24 +0000 (23:13 -0700)]
Merge tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
PCI-e driver for mvebu.
* tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux:
pci: mvebu: fix return value check in mvebu_pcie_probe()
arm: mvebu: PCIe support is now available on mvebu
pci: PCIe driver for Marvell Armada 370/XP systems
clk: mvebu: add more PCIe clocks for Armada XP
clk: mvebu: create parent-child relation for PCIe clocks on Armada 370
of/pci: Add of_pci_parse_bus_range() function
of/pci: Add of_pci_get_devfn() function
of/pci: Provide support for parsing PCI DT ranges property
Olof Johansson [Sat, 1 Jun 2013 05:58:09 +0000 (22:58 -0700)]
Merge branch 'next/cleanup' into for-next
* next/cleanup:
of/pci: Add of_pci_parse_bus_range() function
of/pci: Add of_pci_get_devfn() function
of/pci: Provide support for parsing PCI DT ranges property
Olof Johansson [Sat, 1 Jun 2013 05:56:35 +0000 (22:56 -0700)]
Merge tag 'of_pci-3.11' of git://git.infradead.org/users/jcooper/linux into next/cleanup
From Jason Cooper, of/pci changes for v3.11.
The patches had Reviewed-by: from Rob Herring on the lists, but seems to
have been missed from the commit messages. These will be required as a base
for some of the other functionality in this merge window, so taking it through
arm-soc.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'of_pci-3.11' of git://git.infradead.org/users/jcooper/linux:
of/pci: Add of_pci_parse_bus_range() function
of/pci: Add of_pci_get_devfn() function
of/pci: Provide support for parsing PCI DT ranges property
Olof Johansson [Sat, 1 Jun 2013 05:48:27 +0000 (22:48 -0700)]
Merge branch 'next/dt' into for-next
* next/dt: (27 commits)
arm: kirkwood: openblocks-a6: add support for Init button
arm: kirkwood: openblocks-a6: group pinmux configurations
arm: kirkwood: ts219: move pinmux configs to the right devices
arm: kirkwood: topkick: move pinmux configs to the right devices
arm: kirkwood: openblocks_a6: move pinmux configs to the right devices
arm: kirkwood: nsa310: move pinmux configs to the right devices
arm: kirkwood: readynas: move pinmux configs to the right devices
arm: kirkwood: mplcec4: move pinmux configs to the right devices
arm: kirkwood: buffalo linkstation: move pinmux configs to the right devices
arm: kirkwood: keymile: move pinmux configs to the right devices
arm: kirkwood: ns2: move pinmux configs to the right devices
arm: kirkwood: iomega ix2-200: move pinmux configs to the right devices
arm: kirkwood: iconnect: move pinmux configs to the right devices
arm: kirkwood: iconnect: give meaningful names to pinmux configs
arm: kirkwood: ib62x0: move pinmux configs to the right devices
arm: kirkwood: guruplug: move pinmux configs to the right devices
arm: kirkwood: goflexnet: move pinmux configs to the right devices
arm: kirkwood: dreamplug: move pinmux configs to the right devices
arm: kirkwood: dockstar: move pinmux configs to the right devices
arm: kirkwood: dlink dns: move pinmux configs to the right devices
...
Olof Johansson [Sat, 1 Jun 2013 05:47:53 +0000 (22:47 -0700)]
Merge tag 'dt-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/dt
From jason Cooper, mvebu dt changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'dt-3.11-3' of git://git.infradead.org/users/jcooper/linux: (27 commits)
arm: kirkwood: openblocks-a6: add support for Init button
arm: kirkwood: openblocks-a6: group pinmux configurations
arm: kirkwood: ts219: move pinmux configs to the right devices
arm: kirkwood: topkick: move pinmux configs to the right devices
arm: kirkwood: openblocks_a6: move pinmux configs to the right devices
arm: kirkwood: nsa310: move pinmux configs to the right devices
arm: kirkwood: readynas: move pinmux configs to the right devices
arm: kirkwood: mplcec4: move pinmux configs to the right devices
arm: kirkwood: buffalo linkstation: move pinmux configs to the right devices
arm: kirkwood: keymile: move pinmux configs to the right devices
arm: kirkwood: ns2: move pinmux configs to the right devices
arm: kirkwood: iomega ix2-200: move pinmux configs to the right devices
arm: kirkwood: iconnect: move pinmux configs to the right devices
arm: kirkwood: iconnect: give meaningful names to pinmux configs
arm: kirkwood: ib62x0: move pinmux configs to the right devices
arm: kirkwood: guruplug: move pinmux configs to the right devices
arm: kirkwood: goflexnet: move pinmux configs to the right devices
arm: kirkwood: dreamplug: move pinmux configs to the right devices
arm: kirkwood: dockstar: move pinmux configs to the right devices
arm: kirkwood: dlink dns: move pinmux configs to the right devices
...
Olof Johansson [Sat, 1 Jun 2013 05:47:06 +0000 (22:47 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
arm: kirkwood: Enable cpufreq and ondemand on kirkwood_defconfig
arm: kirkwood: update defconfig with PCIe driver and board updates
arm: mvebu: update defconfig with PCI and USB support
ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig
ARM: kirkwood: enable Sheevaplug DT in defconfig
ARM: mvebu: Add support for USB storage class in mvebu_defconfig
Olof Johansson [Sat, 1 Jun 2013 05:46:02 +0000 (22:46 -0700)]
Merge tag 'defconfig-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper, mvebu defconfig changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'defconfig-3.11-3' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: Enable cpufreq and ondemand on kirkwood_defconfig
arm: kirkwood: update defconfig with PCIe driver and board updates
arm: mvebu: update defconfig with PCI and USB support
ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig
ARM: kirkwood: enable Sheevaplug DT in defconfig
ARM: mvebu: Add support for USB storage class in mvebu_defconfig
Olof Johansson [Sat, 1 Jun 2013 05:44:56 +0000 (22:44 -0700)]
Merge branch 'next/boards' into for-next
* next/boards:
ARM: Kirkwood: Convert LSXL to restart-poweroff driver.
ARM: Kirkwood: Make use of the QNAP Power off driver.
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA
Olof Johansson [Sat, 1 Jun 2013 05:44:13 +0000 (22:44 -0700)]
Merge tag 'boards-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/boards
From Jason Cooper, mvebu board changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'boards-3.11-2' of git://git.infradead.org/users/jcooper/linux:
ARM: Kirkwood: Convert LSXL to restart-poweroff driver.
ARM: Kirkwood: Make use of the QNAP Power off driver.
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA
Olof Johansson [Sat, 1 Jun 2013 05:39:49 +0000 (22:39 -0700)]
Merge tag 'soc-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper, mvebu soc changes for v3.11
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'soc-3.11-2' of git://git.infradead.org/users/jcooper/linux:
arm: kirkwood: Instantiate cpufreq driver
arm: kirkwood: use the default of match table
Olof Johansson [Sat, 1 Jun 2013 05:28:38 +0000 (22:28 -0700)]
Merge tag 'cleanup-3.11-3' of git://git.infradead.org/users/jcooper/linux into next/cleanup
From Jason Cooper, mvebu cleanup for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'cleanup-3.11-3' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: mark functions of armada-370-xp.c as static
ARM: mvebu: Remove init_irq declaration in machine description
ARM: Orion: Remove redundant init_dma_coherent_pool_size()
Olof Johansson [Sat, 1 Jun 2013 05:27:01 +0000 (22:27 -0700)]
Merge tag 'fixes-non-3.11-1' of git://git.infradead.org/users/jcooper/linux into next/fixes-non-critical
From Jason Cooper:
mvebu fixes non-critical for v3.11 (round 1)
- mvebu
- fix register area length in dtsi for ethernet and sata
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'fixes-non-3.11-1' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: fix length of Ethernet registers area in .dtsi
arm: mvebu: fix length of SATA registers area in .dtsi
Olof Johansson [Sat, 1 Jun 2013 05:08:11 +0000 (22:08 -0700)]
Merge tag 'arm-soc-cleanups-for-3.11' of git://github.com/mripard/linux into next/cleanup
From Maxime Ripard:
Cleanups in various machine definitions
- Patches to remove the .init_irq definition when using irqchip_init
- Make the ARM core code call debug_ll_io_init when no map_io callback is
declared
- Remove the .map_io definition in the various machines using it
(Some of these go through the platform maintainers, these are the ones who got
explicitly acked and not picked up by anyone else)
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'arm-soc-cleanups-for-3.11' of git://github.com/mripard/linux:
ARM: sunxi: Remove the .map_io function declaration
ARM: mxs: remove the .map_io declaration
ARM: highbank: remove the .map_io declaration
ARM: mmu: Call debug_ll_io_init if no map_io function is specified
ARM: vt8500: Remove init_irq declaration in machine description
ARM: virt: Remove init_irq declaration in machine description
ARM: vexpress: Remove init_irq declaration in machine description
ARM: sirf: Remove init_irq declaration in machine description
ARM: spear: Remove init_irq declaration in machine description
ARM: nomadik: Remove init_irq declaration in machine description
Boris BREZILLON [Fri, 24 May 2013 10:05:56 +0000 (10:05 +0000)]
ARM: at91/dt: add pinctrl definition for at91 tc blocks
This patch adds pinctrl configurations for at91 Timer Counter blocks.
These pin definitions can be referenced by "atmel,tcb-pwm" devices to
setup pins as PWM output for instance.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
[nicolas.ferre@atmel.com: switch to pinctrl pre-processor macros] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Wenyou Yang [Fri, 31 May 2013 03:10:02 +0000 (11:10 +0800)]
ARM: at91/dtsi: add the watchdog nodes for at91 SoC
at91sam9x5, at91sam9n12
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Douglas Gilbert [Thu, 18 Apr 2013 12:53:06 +0000 (14:53 +0200)]
ARM: at91: add Acme Systems Fox G20 board
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
[nicolas.ferre@atmel.com: re-arranging nodes, removing nodes and some comments] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Thu, 18 Apr 2013 08:13:21 +0000 (10:13 +0200)]
ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one
Due to a bug with RTC IMR, we cannot consider at91sam9x5 RTC compatible
with the previous one. Modify DT compatibility string, even if the driver
is not yet modified to take it into account.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Dave Martin [Tue, 17 Jul 2012 13:25:44 +0000 (14:25 +0100)]
ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
Add the required code to properly handle race free platform coherency exit
to the DCSCB power down method.
The power_up_setup callback is used to enable the CCI interface for
the cluster being brought up. This must be done in assembly before
the kernel environment is entered.
Thanks to Achin Gupta and Nicolas Pitre for their help and
contributions.
Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
Nicolas Pitre [Wed, 18 Jul 2012 20:41:16 +0000 (16:41 -0400)]
ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
If 4 CPUs are assumed, the A15x1-A7x1 model configuration would never
shut down the initial cluster as the 0xf reset bit mask will never be
observed. Let's construct this mask based on the provided information
in the DCSCB config register for the number of CPUs per cluster.
Nicolas Pitre [Tue, 17 Jul 2012 02:07:10 +0000 (22:07 -0400)]
ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
It is possible for a CPU to be told to power up before it managed
to power itself down. Solve this race with a usage count to deal
with this possibility as mandated by the MCPM API definition.
Nicolas Pitre [Thu, 3 May 2012 00:56:52 +0000 (20:56 -0400)]
ARM: vexpress: introduce DCSCB support
This adds basic CPU and cluster reset controls on RTSM for the
A15x4-A7x4 model configuration using the Dual Cluster System
Configuration Block (DCSCB).
The cache coherency interconnect (CCI) is not handled yet.
Rob Herring [Wed, 16 Jan 2013 23:57:33 +0000 (17:57 -0600)]
ARM: introduce common set_auxcr/get_auxcr functions
Move the private set_auxcr/get_auxcr functions from
drivers/cpuidle/cpuidle-calxeda.c so they can be used across platforms.
Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
Nicolas Pitre [Wed, 22 May 2013 03:34:41 +0000 (23:34 -0400)]
drivers/bus: arm-cci: function to enable CCI ports from early boot code
This provides cci_enable_port_for_self(). This is the counterpart to
cci_disable_port_by_cpu(self).
This is meant to be called from the MCPM machine specific power_up_setup
callback code when the appropriate affinity level needs to be initialized.
The code therefore has to be position independent as the MMU is still off
and it cannot rely on any stack space.
Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Dave Martin <dave.martin@linaro.org>
On ARM multi-cluster systems coherency between cores running on
different clusters is managed by the cache-coherent interconnect (CCI).
It allows broadcasting of TLB invalidates and memory barriers and it
guarantees cache coherency at system level through snooping of slave
interfaces connected to it.
This patch enables the basic infrastructure required in Linux to handle and
programme the CCI component.
Non-local variables used by the CCI management functions called by power
down function calls after disabling the cache must be flushed out to main
memory in advance, otherwise incoherency of those values may occur if they
are sitting in the cache of some other CPU when power down functions
execute. Driver code ensures that relevant data structures are flushed
from inner and outer caches after the driver probe is completed.
CCI slave port resources are linked to set of CPUs through bus masters
phandle properties that link the interface resources to masters node in
the device tree.
Documentation describing the CCI DT bindings is provided with the patch.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Switch from function-centric to soc-centric clock drivers now makes
a bunch of files obsolete. This deletes all files and Kconfig options
that are not required anymore.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
ARM: mvebu: move DT boards to SoC-centric clock init
SoC centric clock init for Armada 370/XP can be used by calling of_clk_init.
Use it and get rid of mvebu_clocks_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
ARM: kirkwood: move DT boards to SoC-centric clock init
SoC centric clock init for Kirkwood can be used by calling of_clk_init.
Use it and get rid of mvebu_clocks_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
ARM: dove: move DT boards to SoC-centric clock init
SoC centric clock init for Dove can be used by calling of_clk_init.
Use it and get rid of mvebu_clocks_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Armada XP to
its own file and adds a Kconfig option. Also init functions are added
and declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Armada 370 to
its own file and adds a Kconfig option. Also init functions are added
and declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Kirkwood to its
own file and adds a Kconfig option. Also init functions are added and
declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Dove to its own
file and adds a Kconfig option. Also init functions are added and
declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
clk: mvebu: add common clock functions for core clk and clk gating
Based on the current common functions for core clocks and clock
gating control, new common functions are joined in a single file.
Given the opportunity, names of functions and structs are unified,
and also a Kconfig entry is added.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Clock gates found on MVEBU SoCs get registered by a common function.
To allow specific SoCs to provide tweaks introduce flags to the clock
gate descriptor instead of filling up the common function SoC specific
tweaks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel
uart to uart 3 (which is only used to show the "uncompressing kernel"
message at boot, it seems).
Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Thomas Petazzoni [Tue, 21 May 2013 10:33:27 +0000 (12:33 +0200)]
arm: mvebu: fix length of Ethernet registers area in .dtsi
The length of the registers area for the Marvell 370/XP Ethernet
controller was incorrect in the .dtsi: 0x2400 while it should have
been 0x4000. Until now, this problem wasn't noticed because there was
a large static mapping for all I/Os set up by ->map_io(). But since
we're going to get rid of this static mapping, we need to ensure that
the register areas are properly sized.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Tue, 21 May 2013 10:33:26 +0000 (12:33 +0200)]
arm: mvebu: fix length of SATA registers area in .dtsi
The length of the registers area for the Marvell 370/XP SATA
controller was incorrect in the .dtsi: 0x2400 while it should have
been 0x5000. Until now, this problem wasn't noticed because there was
a large static mapping for all I/Os set up by ->map_io(). But since
we're going to get rid of this static mapping, we need to ensure that
the register areas are properly sized.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Olof Johansson [Tue, 28 May 2013 05:36:06 +0000 (22:36 -0700)]
Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup
From Nicolas Ferre:
Big update converting pinctrl to use macros and header files. Increases
readability and avoids typos.
Update of AT91 defconfigs and merge of defconfigs for the similar SoCs
sam9260/9g20 and sam9261/9g10.
* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
ARM: at91: udpate defconfigs
ARM: at91: dt: switch to standard IRQ flag defines
ARM: at91: dt: switch to pinctrl to pre-processor
ARM: at91: dt: add pinctrl pre-processor define
ARM: at91: dt: switch to standard GPIO flag defines.
ARM: at91: dt: use #include for all device trees
Olof Johansson [Tue, 28 May 2013 04:22:20 +0000 (21:22 -0700)]
Merge branch 'next/dt' into for-next
* next/dt:
ARM: nomadik: move the pin configuration to DT
ARM: nomadik: add led and key for S8815
ARM: nomadik: register clocksource from device tree
ARM: nomadik: convert all clocks except timer to dt
clocksource: nomadik-mtu: support of probe
Olof Johansson [Tue, 28 May 2013 04:20:17 +0000 (21:20 -0700)]
Merge tag 'nomadik-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
From Linus Walleij:
Device tree patches for the Nomadik machine:
- Move clock registration to the device tree
- Support probing the MTU timer from the device tree
- Register user LED and user key in the device tree
- Update defconfig to account for user LED and user key
- Move pin control mappings to the device tree
* tag 'nomadik-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: nomadik: move the pin configuration to DT
ARM: nomadik: add led and key for S8815
ARM: nomadik: register clocksource from device tree
ARM: nomadik: convert all clocks except timer to dt
clocksource: nomadik-mtu: support of probe
Olof Johansson [Tue, 28 May 2013 03:10:48 +0000 (20:10 -0700)]
Merge branch 'next/drivers' into for-next
* next/drivers: (36 commits)
ARM: ux500: Register Cryp and Hash platform drivers on Snowball
crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog
ARM: ux500: Stop passing Cryp DMA channel config information though pdata
crypto: ux500/cryp - Set DMA configuration though dma_slave_config()
crypto: ux500/cryp - Prepare clock before enabling it
ARM: ux500: Stop passing Hash DMA channel config information though pdata
crypto: ux500/hash - Set DMA configuration though dma_slave_config()
crypto: ux500/hash - Prepare clock before enabling it
ARM: ux500: Remove unnecessary attributes from DMA channel request pdata
dmaengine: ste_dma40: Correct copy/paste error
ARM: ux500: Remove DMA address look-up table
dmaengine: ste_dma40: Remove redundant address fetching function
dmaengine: ste_dma40: Only use addresses passed as configuration information
ARM: ux500: Stop passing UART's platform data for Device Tree boots
dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate
dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking
ARM: ux500: Pass remnant platform data though to DMA40 driver
dmaengine: ste_dma40: Supply full Device Tree parsing support
dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled
...
Olof Johansson [Tue, 28 May 2013 03:09:53 +0000 (20:09 -0700)]
Merge tag 'ux500-dma40-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers
From Linus Walleij:
This is a set of patches from Lee Jones to start converting
the ux500 to fetch DMA channels from the device tree:
- Full DT support and channel mapping in the DMA40 driver
- Dropping of platform data for migrated devices on the DT
boot path.
* tag 'ux500-dma40-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (36 commits)
ARM: ux500: Register Cryp and Hash platform drivers on Snowball
crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog
ARM: ux500: Stop passing Cryp DMA channel config information though pdata
crypto: ux500/cryp - Set DMA configuration though dma_slave_config()
crypto: ux500/cryp - Prepare clock before enabling it
ARM: ux500: Stop passing Hash DMA channel config information though pdata
crypto: ux500/hash - Set DMA configuration though dma_slave_config()
crypto: ux500/hash - Prepare clock before enabling it
ARM: ux500: Remove unnecessary attributes from DMA channel request pdata
dmaengine: ste_dma40: Correct copy/paste error
ARM: ux500: Remove DMA address look-up table
dmaengine: ste_dma40: Remove redundant address fetching function
dmaengine: ste_dma40: Only use addresses passed as configuration information
ARM: ux500: Stop passing UART's platform data for Device Tree boots
dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate
dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking
ARM: ux500: Pass remnant platform data though to DMA40 driver
dmaengine: ste_dma40: Supply full Device Tree parsing support
dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled
...
Olof Johansson [Tue, 28 May 2013 02:26:30 +0000 (19:26 -0700)]
Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim:
Fixes following for v3.10
- to get usb2 working on the Chromebook with adding the
usb phy node for usb2 on exynos5250
- supporting exynos4210 rev0 SoC
- exynos5440 restart applying only to powered-on domains
- drm-exynos probe failure with adding resource names to
fimd0 platform device
* tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: SAMSUNG: Add names to fimd0 IRQ resources
ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC
ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
ARM: dts: Enabling samsung-usb2phy driver for exynos5250
Thomas Petazzoni [Wed, 15 May 2013 13:37:01 +0000 (15:37 +0200)]
arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree
This commit converts the Marvell DB-88F6281/DB-88F6282 board to the
Device Tree. In fact, the code was supporting two different boards:
one with the 6281 SoC variant, and one with the 6282 SoC variant. The
difference between the two being that the 6281 has one PCIe interface,
and the 6282 has two PCIe interfaces.
In order to handle that with the Device Tree, we create a
'kirkwood-db.dtsi' file that contains the definitions common to both
boards, and 'kirkwood-db-88f6281.dts' and 'kirkwood-db-88f6282.dts'
for the definitions specific to each board. This is similar to what is
done for the QNAP TS219 Kirkwood platform.
We have kept one single Kconfig option, just like it was before.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Wed, 15 May 2013 13:37:00 +0000 (15:37 +0200)]
arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface
Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Wed, 15 May 2013 13:36:59 +0000 (15:36 +0200)]
arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface
Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.
Since it was the only device left that prevented this platform to use
the Device Tree only, we remove the board-nsa310.c file and the
related Kconfig/Makefile bits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Wed, 15 May 2013 13:36:58 +0000 (15:36 +0200)]
arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface
Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Wed, 15 May 2013 13:36:57 +0000 (15:36 +0200)]
arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface
Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
of the legacy PCIe code, since it allows to describe the PCIe
interfaces in the Device Tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Wed, 15 May 2013 13:36:56 +0000 (15:36 +0200)]
arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces
This commit adds Device Tree details to enable the PCIe interfaces on
Kirkwood. The 6281 has one PCIe interface, the 6282 has two PCIe
interfaces.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Wed, 15 May 2013 13:36:55 +0000 (15:36 +0200)]
arm: kirkwood: move PCIe window init to legacy driver
Since we are going to enable the usage of the mvebu PCIe driver on
Kirkwood, we don't want the PCIe windows to be unconditionally created
by kirkwood_setup_wins(). Therefore, we move the PCIe window
initialization into the legacy PCIe driver
(arch/arm/mach-kirkwood/pcie.c).
The platforms using the legacy driver will see their windows
statically allocated by
arch/arm/mach-kirkwood/pcie.c:kirkwood_pcie_init(). The platforms
using the new driver in drivers/pci/ will see their windows
dynamically allocated directly by the driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Wed, 15 May 2013 13:36:54 +0000 (15:36 +0200)]
pci: mvebu: enable driver usage on Kirkwood
We allow the pci-mvebu driver to be compiled on the Kirkwood platform,
and add the 'marvell,kirkwood-pcie' as a compatible string supported
by the driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Thu, 23 May 2013 14:32:53 +0000 (16:32 +0200)]
pci: mvebu: fix the emulation of the status register
The status register of the PCI configuration space of PCI-to-PCI
bridges contain some read-only bits, and so write-1-to-clear bits. So,
the Linux PCI core sometimes writes 0xffff to this status register,
and in the current PCI-to-PCI bridge emulation code of the Marvell
driver, we do take all those 1s being written. Even the read-only bits
are being overwritten.
For now, all the read-only bits should be emulated to have the zero
value.
The other bits, that are write-1-to-clear bits are used to report
various kind of errors, and are never set by the emulated bridge, so
there is no need to support this write-1-to-clear bits mechanism.
As a conclusion, the easiest solution is to simply emulate this status
register by returning zero when read, and ignore the writes to it.
This has two visible effects:
* The devsel is no longer 'unknown' in, i.e
Flags: bus master, 66MHz, user-definable features, ?? devsel, latency 0
becomes:
Flags: bus master, 66MHz, user-definable features, fast devsel, latency 0
in lspci -v.
This was caused by a value of 11b being read for devsel, which is
an invalid value. This 11b value being read was due to a previous
write of 0xffff into the status register.
* The capability list is no longer broken, because we indicate to the
Linux PCI core that we don't have a Capabilities Pointer in the PCI
configuration space of this bridge. The following message is
therefore no longer visible in lspci -v:
Capabilities: [fc] <chain broken>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Thu, 23 May 2013 14:32:52 +0000 (16:32 +0200)]
pci: mvebu: allow the enumeration of devices beyond physical bridges
Until now, the Marvell PCIe driver was only allowing the enumeration
of the devices in the secondary bus of the emulated PCI-to-PCI
bridge. This works fine when a PCIe device is directly connected into
a PCIe slot of the Marvell board.
However, when the device connected in the PCIe slot is a physical PCIe
bridge, beyond which a real PCIe device is connected, it no longer
worked, as the driver was preventing the Linux PCI core from seeing
such devices.
This commit fixes that by ensuring that configuration transactions on
subordinate busses are properly forwarded on the right PCIe interface.
Thanks to this patch, a PCIe card beyond a PCIe bridge, itself beyond
the emulated PCI-to-PCI bridge is properly detected, with the
following layout:
Where the PCIe interface that sits beyond the emulated PCI-to-PCI
bridge at 09.0 allows to access the secondary bus 02, on which there
is a PCIe bridge that allows to access the 3 to 7 busses, that are
subordinates to this bridge. And on one of this bus (bus 7), there is
one real PCIe device connected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Thu, 23 May 2013 14:32:51 +0000 (16:32 +0200)]
pci: mvebu: no longer fake the slot location of downstream devices
By default, the Marvell hardware, for each PCIe interface, exhibits
the following devices:
* On slot 0, a "Marvell Memory controller", identical on all PCIe
interfaces, and which isn't useful when the Marvell SoC is the PCIe
root complex (i.e, the normal case when we run Linux on the Marvell
SoC).
* On slot 1, the real PCIe card connected into the PCIe slot of the
board.
So, what the Marvell PCIe driver was doing in its PCI-to-PCI bridge
emulation is that when the Linux PCI core was trying to access the
device in slot 0, we were in fact forwarding the configuration
transaction to the device in slot 1. For all other slots, we were
telling the Linux PCI core that there was no device connected.
However, new versions of bootloaders from Marvell change the default
PCIe configuration, and make the real device appear in slot 0, and the
"Marvell Memory controller" in slot 1.
Therefore, this commit modifies the Marvell PCIe driver to adjust the
PCIe hardware configuration to make sure that this behavior (real
device in slot 0, "Marvell Memory controller" in slot 1) is the one
we'll see regardless of what the bootloader has done. It allows to
remove the little hack that was forwarding configuration transactions
on slot 0 to slot 1, which is nice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Wei Yongjun [Mon, 27 May 2013 03:38:41 +0000 (11:38 +0800)]
pci: mvebu: fix return value check in mvebu_pcie_probe()
In case of error, function of_clk_get_by_name() returns
ERR_PTR() never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:58 +0000 (11:44 +0200)]
arm: kirkwood: openblocks-a6: add support for Init button
The Kirkwood-based PlatHome OpenBlocks A6 board has an Init button
connected to MPP pin 38. This commit adds support for this button.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Atsushi Yamagata <yamagata@plathome.co.jp> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:57 +0000 (11:44 +0200)]
arm: kirkwood: openblocks-a6: group pinmux configurations
Instead of having one separate pinmux configuration for each LED, for
each GPIO of the GPIO header, for each DIP switch, this patch groups
them together in configurations that make sense together: LEDs on one
side, GPIOs of the GPIO header on another side, and DIP switches on
yet another side.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Atsushi Yamagata <yamagata@plathome.co.jp> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:56 +0000 (11:44 +0200)]
arm: kirkwood: ts219: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-By: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:55 +0000 (11:44 +0200)]
arm: kirkwood: topkick: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-By: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:54 +0000 (11:44 +0200)]
arm: kirkwood: openblocks_a6: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Atsushi Yamagata <yamagata@plathome.co.jp> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:53 +0000 (11:44 +0200)]
arm: kirkwood: nsa310: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:52 +0000 (11:44 +0200)]
arm: kirkwood: readynas: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:51 +0000 (11:44 +0200)]
arm: kirkwood: mplcec4: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:50 +0000 (11:44 +0200)]
arm: kirkwood: buffalo linkstation: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:49 +0000 (11:44 +0200)]
arm: kirkwood: keymile: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Fri, 24 May 2013 09:44:48 +0000 (11:44 +0200)]
arm: kirkwood: ns2: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.
Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.
This allows the pinctrl subsystem to show in debugfs to which device
is related which pins, for example:
pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41
pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42
pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
projects / karo-tx-linux.git / log