Arnd Bergmann [Tue, 25 Jan 2011 22:17:27 +0000 (23:17 +0100)]
appletalk: move to staging
For all I know, Appletalk is dead, the only reasonable
use right now would be nostalgia, and that can be served
well enough by old kernels. The code is largely not
in a bad shape, but it still uses the big kernel lock,
and nobody seems motivated to change that.
FWIW, the last release of MacOS that supported Appletalk
was MacOS X 10.5, made in 2007, and it has been abandoned
by Apple with 10.6. Using TCP/IP instead of Appletalk has
been supported since MacOS 7.6, which was released in
1997 and is able to run on most of the legacy hardware.
Arnd Bergmann [Tue, 25 Jan 2011 22:17:20 +0000 (23:17 +0100)]
staging: Remove autofs3
autofs3 was moved to staging in 2.6.37, so we can
remove it in the 2.6.39 merge window. If we have
a reason to bring it back after that, this patch
can get reverted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> About-fscking-timed-by: H. Peter Anvin <hpa@zytor.com> Cc: Ian Kent <raven@themaw.net> Cc: autofs@linux.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Mon, 31 Jan 2011 21:11:28 +0000 (13:11 -0800)]
staging: fix rts_pstor build errors
Fix multiple rts_pstor build errors.
When CONFIG_PCI is not enabled:
drivers/staging/rts_pstor/rtsx.c: In function 'rtsx_acquire_irq':
drivers/staging/rts_pstor/rtsx.c:324: error: implicit declaration of function 'pci_intx'
drivers/staging/rts_pstor/rtsx.c: In function 'rtsx_read_pci_cfg_byte':
drivers/staging/rts_pstor/rtsx.c:336: error: implicit declaration of function 'pci_get_domain_bus_and_slot'
drivers/staging/rts_pstor/rtsx.c:336: warning: assignment makes pointer from integer without a cast
drivers/staging/rts_pstor/rtsx.c: In function 'rtsx_shutdown':
drivers/staging/rts_pstor/rtsx.c:462: error: implicit declaration of function 'pci_disable_msi'
drivers/staging/rts_pstor/rtsx.c: In function 'rtsx_probe':
drivers/staging/rts_pstor/rtsx.c:981: error: implicit declaration of function 'pci_enable_msi'
When CONFIG_SCSI is not enabled:
In file included from drivers/staging/rts_pstor/rtsx.h:45,
from drivers/staging/rts_pstor/rtsx.c:28:
include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined
include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
In file included from drivers/staging/rts_pstor/rtsx.h:45,
from drivers/staging/rts_pstor/rtsx.c:28:
include/scsi/scsi_cmnd.h: In function 'scsi_bidi_cmnd':
include/scsi/scsi_cmnd.h:184: error: implicit declaration of function 'blk_bidi_rq'
include/scsi/scsi_cmnd.h:185: error: dereferencing pointer to incomplete type
include/scsi/scsi_cmnd.h: In function 'scsi_in':
include/scsi/scsi_cmnd.h:191: error: dereferencing pointer to incomplete type
include/scsi/scsi_cmnd.h: In function 'scsi_get_lba': CC drivers/gpu/drm/nouveau/nv04_tv.o
include/scsi/scsi_cmnd.h:269: error: implicit declaration of function 'blk_rq_pos'
In file included from drivers/staging/rts_pstor/rtsx.h:48,
from drivers/staging/rts_pstor/rtsx.c:28:
include/scsi/scsi_eh.h: At top level:
include/scsi/scsi_eh.h:84: error: 'BLK_MAX_CDB' undeclared here (not in a function)
drivers/staging/rts_pstor/rtsx.c: In function 'slave_configure':
drivers/staging/rts_pstor/rtsx.c:107: error: implicit declaration of function 'blk_queue_dma_alignment'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: wei_wang@realsil.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
This patch fixes errors reported by checkpatch.pl
in westbridge device controller driver in the staging tree.
File containing EXPORT_SYMBOL() macros for all the APIs exported
by the westbridge software has been removed. EXPORT_SYMBOL()
macros are added after the corresponding function definitions.
Arend van Spriel [Sun, 23 Jan 2011 07:30:38 +0000 (08:30 +0100)]
staging: brcm80211: assure common sources are truly common
Common code for brcm80211 drivers was resulting in different compiled
object files for the drivers due to compilation flags. This has been
aligned so that they are resulting in same object files. Kconfig now
allows both drivers to be build simultaneously.
Reviewed-by: Brett Rudley <brudley@broadcom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Mon, 24 Jan 2011 15:08:20 +0000 (17:08 +0200)]
staging/easycap: make OSS compilation optional instead of ALSA
OSS is deprecated yet currently it is reported to be more stable
therefore we keep it but make it optional
Revert the conditional compilation:
add CONFIG_EASYCAP_OSS and kill EASYCAP_NEEDS_ALSA
move oss-only code from easycap_sound.c to easycap_sound_oss.c
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Mon, 24 Jan 2011 11:27:00 +0000 (13:27 +0200)]
staging/easycap: fix missing backslash in ifdef statement
the backslash was removed by mistake in the patch
'staging:easycap: drop redundant backslashes from the code'
this breaks compilation only when EASYCAP_NEEDS_ALSA is not set
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Sat, 22 Jan 2011 23:13:53 +0000 (01:13 +0200)]
staging: easycap: fix sparse warnings :conversion of int to enum
easycap_settings.c:587:58: warning: conversion of
easycap_settings.c:587:58: unsigned int to
easycap_settings.c:587:58: int enum v4l2_field
easycap_settings.c:593:63: warning: conversion of
easycap_settings.c:593:63: unsigned int to
easycap_settings.c:593:63: int enum v4l2_colorspace
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Sat, 22 Jan 2011 23:13:52 +0000 (01:13 +0200)]
staging: easycap: fix sparse warnings 'Should it be static'
easycap_main.c:41:23: warning: symbol 'easycapdc60_dongle' was not declared. Should it be static?
easycap_main.c:49:22: warning: symbol 'easycap_usb_device_id_table' was not declared. Should it be static?
easycap_main.c:69:30: warning: symbol 'easycap_fops' was not declared. Should it be static?
easycap_main.c:82:29: warning: symbol 'easycap_vm_ops' was not declared. Should it be static?
easycap_main.c:87:25: warning: symbol 'easycap_class' was not declared. Should it be static?
easycap_main.c:95:35: warning: symbol 'v4l2_fops' was not declared. Should it be static?
easycap_main.c:5071:1: warning: symbol 'easycap_module_init' was not declared. Should it be static?
easycap_main.c:5101:1: warning: symbol 'easycap_module_exit' was not declared. Should it be static?
easycap_low.c:45:50: warning: symbol 'stk1160configPAL' was not declared. Should it be static?
easycap_low.c:87:28: warning: symbol 'stk1160configNTSC' was not declared. Should it be static?
easycap_low.c:129:50: warning: symbol 'saa7113configPAL' was not declared. Should it be static?
easycap_low.c:187:28: warning: symbol 'saa7113configNTSC' was not declared. Should it be static?
easycap_ioctl.c:915:5: warning: symbol 'adjust_mute' was not declared. Should it be static?
easycap_settings.c:42:31: warning: symbol 'easycap_standard' was not declared. Should it be static?
easycap_settings.c:312:23: warning: symbol 'easycap_format' was not declared. Should it be static?
easycap_settings.c:607:23: warning: symbol 'easycap_control' was not declared. Should it be static?
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ralph Loader [Fri, 21 Jan 2011 06:27:53 +0000 (19:27 +1300)]
staging: Fix some incorrect use of positive error codes.
Use -E... instead of just E... in a few places where negative error
codes are expected by a functions callers. These were found by grepping
with coccinelle & then inspecting by hand to determine which were bugs.
The staging/cxt1e1 driver appears to intentionally use positive E...
error codes in some places, and negative -E... error codes in others,
making it hard to know which is intended where - very likely I missed
some problems in that driver.
Signed-off-by: Ralph Loader <suckfish@ihug.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Tue, 18 Jan 2011 17:44:33 +0000 (17:44 +0000)]
staging: comedi: Make INSN_BITS behavior consistent across drivers
Most comedi hardware drivers that support the INSN_BITS instruction
ignore the base channel (specified by insn->chanspec) and assume it is
0. The base channel is supposed to affect how the mask (in data[0]) and
bits (in data[1]) are treated. Bit 0 applies to the base channel, bit 1
applies to base channel plus 1, etc.
For subdevices with no more than 32 channels, this patch modifies the
chanspec and data before presenting it to the hardware driver, and
modifies the data bits read back by the hardware driver (into data[1]).
This makes it appear to the hardware driver that the base channel was
set to 0.
For subdevices with more than 32 channels, the instruction is left
unmodified, as it is assumed that the hardware driver takes note of the
base channel in this case in order to provide access beyond channel 31.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the sparse warnings in me4000.c:
me4000.c:122:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:123:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:124:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:125:1: warning: obsolete struct initializer, use C99 syntax
by converting the struct to use C99 syntax
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Tue, 18 Jan 2011 12:03:23 +0000 (14:03 +0200)]
Staging: easycap: fix sparse warnings for module parameters
easycap_main.c:34:5: warning: symbol 'easycap_debug' was not declared. Should it be static?
easycap_main.c:36:5: warning: symbol 'easycap_gain' was not declared. Should it be static?
These two variables actually were declared in several places.
The variables are used in several files.
I've fixed "easycap_debug" so it gets declared in one place only and included properly.
For "easycap_gain" made it static and I created added a
->gain member to the easycap struct. This seems cleaner than using a
global variable and later on we may make this controlable via sysfs.
Cc:Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 14 Jan 2011 21:02:18 +0000 (15:02 -0600)]
staging: r8712u: Firmware changes for driver
* select FW_LOADER in Kconfig - From: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* declare MODULE_FIRMWARE for r8712u and change to correct directory
* delete 10K line farray.h containing internal firmware
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Thomas [Mon, 10 Jan 2011 18:34:41 +0000 (18:34 +0000)]
Staging: easycap: Make easycap_debug non-static
The parameter easycap_debug appears in macros JOT and JOM and therefore
needs to be visible from all source files. The easycap_ prefix should
be sufficient to avoid namespace clashes outside the module.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brice Dubost [Fri, 7 Jan 2011 17:49:18 +0000 (18:49 +0100)]
staging: comedi : Analog input trigerring modes for cb_pcidas
This patch allows the possibility to choose between edgre triggering
and level trigerring, for the analog input, on the Measurement
Computing PCI-DAS* boards
staging: keucr: Delete use kernel strcmp() & strcpy() from TODO file
staging: keucr: Delete use kernel strcmp() & strcpy() from TODO file
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Al Cho <acho@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: keucr: Delete StringCmp() and StringCopy custom functions
staging: keucr: Delete StringCmp() and StringCopy custom functions
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Al Cho <acho@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: keucr: Use memcpy() instead custom StringCopy() and some style cleanups
staging: keucr: Use memcpy() instead custom StringCopy() and some style cleanups
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Al Cho <acho@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: keucr: Use memcmp() instead custom StringCmp() and some style cleanups
staging: keucr: Use memcmp() instead custom StringCmp() and some style cleanups
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Al Cho <acho@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bitwise and logical or are the equivalent here, so this doesn't affect
runtime, but logical or was intended. The original code causes a
warning in Sparse: "warning: dubious: !x | !y"
Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-beck.git / log