Trond Myklebust [Mon, 28 May 2012 14:01:34 +0000 (10:01 -0400)]
NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE
We're already invalidating the data cache, and setting the new change
attribute. Since directories don't care about the i_size field, there
is no need to be forcing any extra revalidation of the page cache.
We do keep the NFS_INO_INVALID_ATTR flag, in order to force an
attribute cache revalidation on stat() calls since we do not
update the mtime and ctime fields.
Trond Myklebust [Sun, 27 May 2012 18:46:46 +0000 (14:46 -0400)]
NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error
The results from a call to nfs4_proc_create_session() should always
be fed into nfs4_handle_reclaim_lease_error, so that we can
handle errors such as NFS4ERR_SEQ_MISORDERED correctly.
Trond Myklebust [Sat, 26 May 2012 17:41:04 +0000 (13:41 -0400)]
NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid
If the EXCHGID4_FLAG_CONFIRMED_R flag is set, the client is in theory
supposed to already know the correct value of the seqid, in which case
RFC5661 states that it should ignore the value returned.
Also ensure that if the sanity check in nfs4_check_cl_exchange_flags
fails, then we must not change the nfs_client fields.
Finally, clean up the code: we don't need to retest the value of
'status' unless it can change.
Trond Myklebust [Fri, 25 May 2012 19:00:06 +0000 (15:00 -0400)]
NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease
Apparently the patch "NFS: Always use the same SETCLIENTID boot verifier"
is tickling a Linux nfs server bug, and causing a regression: the server
can get into a situation where it keeps replying NFS4ERR_SEQ_MISORDERED
to our CREATE_SESSION request even when we are sending the correct
sequence ID.
This patch adds the BIND_CONN_TO_SESSION operation which is needed for
upcoming SP4_MACH_CRED work and useful for recovering from broken connections
without destroying the session.
Trond Myklebust [Wed, 23 May 2012 17:24:36 +0000 (13:24 -0400)]
NFSv4: Fix a race in the net namespace mount notification
Since the struct nfs_client gets added to the global nfs_client_list
before it is initialised, it is possible that rpc_pipefs_event can
end up trying to create idmapper entries on such a thing.
The solution is to have the mount notification wait for the
initialisation of each nfs_client to complete, and then to
skip any entries for which the it failed.
Reported-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Trond Myklebust [Wed, 23 May 2012 17:23:31 +0000 (13:23 -0400)]
NFSv4.1: Fix session initialisation races
Session initialisation is not complete until the lease manager
has run. We need to ensure that both nfs4_init_session and
nfs4_init_ds_session do so, and that they check for any resulting
errors in clp->cl_cons_state.
Only after this is done, can nfs4_ds_connect check the contents
of clp->cl_exchange_flags.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com>
Chuck Lever [Tue, 22 May 2012 02:46:07 +0000 (22:46 -0400)]
NFS: Add nfs_client behavior flags
"noresvport" and "discrtry" can be passed to nfs_create_rpc_client()
by setting flags in the passed-in nfs_client. This change makes it
easy to add new flags.
Note that these settings are now "sticky" over the lifetime of a
struct nfs_client, and may even be copied when an nfs_client is
cloned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Continue to rationalize the locking in nfs_get_client() by
moving the logic that handles the case where a matching server IP
address is not found.
When we support server trunking detection, client initialization may
return a different nfs_client struct than was passed to it. Change
the synopsis of the init_client methods to return an nfs_client.
The client initialization logic in nfs_get_client() is not much more
than a wrapper around ->init_client. It's simpler to keep the little
bits of error handling in the version-specific init_client methods.
No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Code that takes and releases nfs_client_lock remains in
nfs_get_client(). Logic that handles a pre-existing nfs_client is
moved to a separate function.
No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 22 May 2012 02:45:41 +0000 (22:45 -0400)]
NFS: Always use the same SETCLIENTID boot verifier
Currently our NFS client assigns a unique SETCLIENTID boot verifier
for each server IP address it knows about. It's set to CURRENT_TIME
when the struct nfs_client for that server IP is created.
During the SETCLIENTID operation, our client also presents an
nfs_client_id4 string to servers, as an identifier on which the server
can hang all of this client's NFSv4 state. Our client's
nfs_client_id4 string is unique for each server IP address.
An NFSv4 server is obligated to wipe all NFSv4 state associated with
an nfs_client_id4 string when the client presents the same
nfs_client_id4 string along with a changed SETCLIENTID boot verifier.
When our client unmounts the last of a server's shares, it destroys
that server's struct nfs_client. The next time the client mounts that
NFS server, it creates a fresh struct nfs_client with a fresh boot
verifier. On seeing the fresh verifer, the server wipes any previous
NFSv4 state associated with that nfs_client_id4.
However, NFSv4.1 clients are supposed to present the same
nfs_client_id4 string to all servers. And, to support Transparent
State Migration, the same nfs_client_id4 string should be presented
to all NFSv4.0 servers so they recognize that migrated state for this
client belongs with state a server may already have for this client.
(This is known as the Uniform Client String model).
If the nfs_client_id4 string is the same but the boot verifier changes
for each server IP address, SETCLIENTID and EXCHANGE_ID operations
from such a client could unintentionally result in a server wiping a
client's previously obtained lease.
Thus, if our NFS client is going to use a fixed nfs_client_id4 string,
either for NFSv4.0 or NFSv4.1 mounts, our NFS client should use a
boot verifier that does not change depending on server IP address.
Replace our current per-nfs_client boot verifier with a per-nfs_net
boot verifier.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 22 May 2012 02:45:33 +0000 (22:45 -0400)]
NFS: Force server to drop NFSv4 state
nfs4_reset_all_state() refreshes the boot verifier a server sees to
trigger that server to wipe this client's state. This function is
invoked when an NFSv4.1 server reports that it has revoked some or
all of a client's NFSv4 state.
To facilitate server trunking discovery, we will eventually want to
move the cl_boot_time field to a more global structure. The Uniform
Client String model (and specifically, server trunking detection)
requires that all servers see the same boot verifier until the client
actually does reboot, and not a fresh verifier every time the client
unmounts and remounts the server.
Without the cl_boot_time field, however, nfs4_reset_all_state() will
have to find some other way to force the server to purge the client's
NFSv4 state.
Because these verifiers are opaque (ie, the server doesn't know or
care that they happen to be timestamps), we can force the server
to wipe NFSv4 state by updating the boot verifier as we do now, then
immediately afterwards establish a fresh client ID using the old boot
verifier again.
Hopefully there are no extra paranoid server implementations that keep
track of the client's boot verifiers and prevent clients from reusing
a previous one.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 22 May 2012 02:44:41 +0000 (22:44 -0400)]
NFS: Use proper naming conventions for nfs_client.impl_id field
Clean up: When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.
Additionally, for consistency, move the impl_id field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.
Introduced by commit 7d2ed9ac "NFSv4: parse and display server
implementation ids," Fri Feb 17, 2012.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 22 May 2012 02:44:31 +0000 (22:44 -0400)]
NFS: Use proper naming conventions for NFSv4.1 server scope fields
Clean up: When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.
Additionally, for consistency, move the scope field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.
Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April
1 2009.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 22 May 2012 02:45:16 +0000 (22:45 -0400)]
NFS: Don't swap bytes in nfs4_construct_boot_verifier()
The SETCLIENTID boot verifier is opaque to NFSv4 servers, thus there
is no requirement for byte swapping before the client puts the
verifier on the wire.
This treatment is similar to other timestamp-based verifiers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bryan Schumaker [Tue, 22 May 2012 14:10:03 +0000 (10:10 -0400)]
NFS: Fix compiler warnings
The "struct inode *inode" was only used in a dprintk, so compiling with
CONFIG_SUNRPC_DEBUG off triggers a warning. To get around this, I
remove the "struct inode *inode" variable and instead change the
dprintk()s to use hdr->inode instead.
Andy Adamson [Tue, 22 May 2012 12:09:27 +0000 (08:09 -0400)]
NFSv4.1 skip rpc_call_done only on disconnected DS slot_table_waitq tasks
We reset all I/O on a disconnected data server through the pgio layer indicated
by the NFS_IOHDR_REDO flag.
Differentiate between on-the-wire tasks returning with an error which must
call rpc_call_done and tasks woken from the data server slot_table_waitq
waiting for a session slot with a status of zero which call rpc_exit in
rpc_prepare and need to skip rpc_call_done.
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Andy Adamson [Fri, 27 Apr 2012 21:53:53 +0000 (17:53 -0400)]
NFSv4.1 resend LAYOUTGET on data server invalid layout errors
The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server. Currently, the layout must be
destroyed before a new layout can be obtained.
This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.
Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Andy Adamson [Fri, 27 Apr 2012 21:53:48 +0000 (17:53 -0400)]
NFSv4.1 Check invalid deviceid upon slot table waitq wakeup
Tasks sleeping on the slot table waitq wake to the rpc_prepare_task state.
Reset the task for io through the MDS if the deviceid is invalid.
The reset functions put the io pages through the pageio layer which has the
advantage of re-coalescing which allows for the MDS and DS having different
r/wsizes. Exit the awakened task without executing the rpc_call_done routine.
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the invalid deviceid test into nfs4_fl_prepare_ds, called by the
filelayout read, write, and commit routines. NFS4_DEVICE_ID_NEG_ENTRY
is no longer needed.
Remove redundant printk's - filelayout_mark_devid_invalid prints a KERN_WARNING.
An invalid device prevents pNFS io.
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Sat, 19 May 2012 16:12:53 +0000 (12:12 -0400)]
sunrpc: fix loss of task->tk_status after rpc_delay call in xprt_alloc_slot
xprt_alloc_slot will call rpc_delay() to make the task wait a bit before
retrying when it gets back an -ENOMEM error from xprt_dynamic_alloc_slot.
The problem is that rpc_delay will clear the task->tk_status, causing
call_reserveresult to abort the task.
The solution is simply to let call_reserveresult handle the ENOMEM error
directly.
Benny Halevy [Wed, 16 May 2012 08:35:36 +0000 (11:35 +0300)]
NFS: fix unsigned comparison in nfs4_create_sec_client
fs/nfs/nfs4namespace.c: In function ‘nfs4_create_sec_client’:
fs/nfs/nfs4namespace.c:171:2: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
Randy Dunlap [Sun, 13 May 2012 17:35:40 +0000 (10:35 -0700)]
sunrpc: fix kernel-doc warnings
Fix kernel-doc warnings in sunrpc/rpc_pipe.c and
sunrpc/rpcb_clnt.c:
Warning(net/sunrpc/rpcb_clnt.c:428): No description found for parameter 'net'
Warning(net/sunrpc/rpcb_clnt.c:567): No description found for parameter 'net'
Warning(net/sunrpc/rpc_pipe.c:133): No description found for parameter 'pipe'
Warning(net/sunrpc/rpc_pipe.c:133): Excess function parameter 'inode' description in 'rpc_queue_upcall'
Warning(net/sunrpc/rpc_pipe.c:839): No description found for parameter 'pipe'
Warning(net/sunrpc/rpc_pipe.c:839): Excess function parameter 'ops' description in 'rpc_mkpipe_dentry'
Warning(net/sunrpc/rpc_pipe.c:839): Excess function parameter 'flags' description in 'rpc_mkpipe_dentry'
Warning(net/sunrpc/rpc_pipe.c:949): No description found for parameter 'dentry'
Warning(net/sunrpc/rpc_pipe.c:949): Excess function parameter 'clnt' description in 'rpc_remove_client_dir'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bryan Schumaker [Thu, 10 May 2012 20:47:18 +0000 (16:47 -0400)]
NFS: Create an NFS v3 stat_to_errno()
In theory, NFS v3 can have different error versions than NFS v2. v4 is
already using its own nfs4_stat_to_errno() to map error codes, so
rather than create something in the generic client for v2 and v3 to
share I instead give v3 its own function.
Bryan Schumaker [Thu, 10 May 2012 19:07:43 +0000 (15:07 -0400)]
NFS: Pass mntfh as part of the nfs_mount_info structure
This allows me to use the filehandle allocated in nfs_fs_mount() for nfs
v4 mounts instead of allocating a new one. Rather than change
nfs4_mount() to look almost exactly like nfs_fs_mount(), I instead
remove the function.
Bryan Schumaker [Thu, 10 May 2012 19:07:36 +0000 (15:07 -0400)]
NFS: Use nfs_fs_mount_common() for xdev mounts
At this point, there are only a few small differences between these two
functions. I can set a few function pointers in the nfs_mount_info
struct to get around these differences.
Bryan Schumaker [Thu, 10 May 2012 19:07:35 +0000 (15:07 -0400)]
NFS: Create a common xdev_mount() function
The only difference between nfs_xdev_mount() and nfs4_xdev_mount() is the
clone_super() function called to clone the super block. I can combine
these two functions by using the fill_super field in the mount_info
structure.
Bryan Schumaker [Thu, 10 May 2012 19:07:34 +0000 (15:07 -0400)]
NFS: Create a common fs_mount() function
The nfs4_remote_mount() function was only slightly different from the
nfs_fs_mount() function used by the generic client. I created a new
nfs_mount_info structure to set different parameters to help combine
these functions.
Bryan Schumaker [Thu, 10 May 2012 19:07:32 +0000 (15:07 -0400)]
NFS: Don't pass mount data to nfs_fscache_get_super_cookie()
I intend on creating a single nfs_fs_mount() function used by all our
mount paths. To avoid checking between new mounts and clone mounts, I
instead pass both structures to a new function in super.c that finds the
cache key and then looks up the super cookie.
Bryan Schumaker [Thu, 10 May 2012 19:07:31 +0000 (15:07 -0400)]
NFS: Create a single nfs_get_root()
This patch splits out the NFS v4 specific functionality of
nfs4_get_root() into its own rpc_op called by the generic client, and
leaves nfs4_proc_get_rootfh() as its own stand alone function. This
also allows me to change nfs4_remote_mount(), nfs4_xdev_mount() and
nfs4_remote_referral_mount() to use the generic client's nfs_get_root()
function. Later patches in this series will collapse these functions
into one common function, so using the same get_root() function
everywhere simplifies future changes.
Bryan Schumaker [Thu, 10 May 2012 19:07:30 +0000 (15:07 -0400)]
NFS: Rename nfs4_proc_get_root()
This function is really getting the root filehandle and not the root
dentry of the filesystem. I also removed the rpc_ops lookup from
nfs4_get_rootfh() under the assumption that if we reach this function
then we already know we are using NFS v4.
Linus Torvalds [Sun, 13 May 2012 00:27:41 +0000 (17:27 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM: SoC fixes from Olof Johansson:
"I was hoping to be done with fixes for 3.4 but we got two branches
from subarch maintainers the last couple of days. So here is one
last(?) pull request for arm-soc containing 7 patches:
- Five of them are for shmobile dealing with SMP setup and compile
failures
- The remaining two are for regressions on the Samsung platforms"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
ARM: EXYNOS: use s5p-timer for UniversalC210 board
ARM / mach-shmobile: Invalidate caches when booting secondary cores
ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
Linus Torvalds [Sun, 13 May 2012 00:24:29 +0000 (17:24 -0700)]
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull a few more GPIO bug fixes from Grant Likely:
"Oops, missed a couple. Here's an updated pull req for GPIO"
A set of PCH bug fixes, and one patch to fix up compile warnings
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
gpio/exynos: Fix compiler warnings when non-exynos machines are selected
gpio: pch9: Use proper flow type handlers
Olof Johansson [Sat, 12 May 2012 22:41:22 +0000 (15:41 -0700)]
Merge branch 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
* 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
ARM: EXYNOS: use s5p-timer for UniversalC210 board
Marek Szyprowski [Fri, 11 May 2012 21:17:59 +0000 (06:17 +0900)]
ARM: EXYNOS: use s5p-timer for UniversalC210 board
Commit 069d4e743 ("ARM: EXYNOS4: Remove clock event timers using
ARM private timers") removed support for local timers and forced
to use MCT as event source. However MCT is not operating properly
on early revision of EXYNOS4 SoCs. All UniversalC210 boards are
based on it, so that commit broke support for it. This patch
provides a workaround that enables UniversalC210 boards to boot
again. s5p-timer is used as an event source, it works only for
non-SMP builds.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Olof Johansson [Sat, 12 May 2012 22:40:56 +0000 (15:40 -0700)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes
By Guennadi Liakhovetski (2) and others via Rafael J. Wysocki:
"[...] urgent fixes for Renesas ARM-based platforms. Four of these
commits are fixes of regressions new in 3.4-rc and the last one is
necessary for SMP to work on those systems in general."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
ARM / mach-shmobile: Invalidate caches when booting secondary cores
ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
Magnus Damm [Wed, 9 May 2012 07:24:59 +0000 (16:24 +0900)]
ARM / mach-shmobile: Invalidate caches when booting secondary cores
Make sure L1 caches are invalidated when booting secondary
cores. Needed to boot all mach-shmobile SMP systems that
are using Cortex-A9 including sh73a0, r8a7779 and EMEV2.
Thanks to imx and tegra guys for actual code.
Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
Fix SMP TWD boot regression on sh73a0 based platforms caused by:
4200b16 ARM: shmobile: convert to twd_local_timer_register() interface
After the merge of the above commit it has been impossible to boot
sh73a0 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The
kernel crashes at smp_init_cpus() timing which is before the console
has been initialized, so to the user this looks like a kernel lock up
without any particular error message.
This patch fixes the regression on sh73a0 by moving the TWD
registration code from smp_init_cpus() to sys_timer->init() time.
This patch removed shmobile_twd_init() which is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Magnus Damm [Thu, 10 May 2012 05:57:22 +0000 (14:57 +0900)]
ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
Fix SMP TWD boot regression on r8a7779 based platforms caused by:
4200b16 ARM: shmobile: convert to twd_local_timer_register() interface
After the merge of the above commit it has been impossible to boot
r8a7779 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The
kernel crashes at smp_init_cpus() timing which is before the console
has been initialized, so to the user this looks like a kernel lock up
without any particular error message.
This patch fixes the regression on r8a7779 by moving the TWD
registration code from smp_init_cpus() to sys_timer->init() time.
Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
This also fixes the following modular mmc build failure:
arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd':
pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change'
on this platform by eliminating the use of an inline function, which
calls into the mmc core.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
This also fixes the following modular mmc build failure:
arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd':
pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change'
on this platform by eliminating the use of an inline function, which
calls into the mmc core.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Linus Torvalds [Sat, 12 May 2012 20:02:31 +0000 (13:02 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of minor qla and virto fixes plus one major regression
fix (oops in all legacy host drivers)."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] virtio_scsi: fix TMF use-after-free
[SCSI] fix oops in all legacy host adapters caused by 6f381fa
[SCSI] qla2xxx: Update version number to 8.04.00.03-k.
[SCSI] qla2xxx: Properly check for current state after the fabric-login request.
[SCSI] qla2xxx: Proper completion to scsi-ml for scsi status task_set_full and busy.
[SCSI] qla2xxx: Block flash access from application when device is initialized for ISP82xx.
[SCSI] qla2xxx: Fix reset time out as qla2xxx not ack to reset request.
1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the
entry is dead before returning it to our caller.
2) openvswitch locking and packet validation fixes from Ansis Atteka,
Jesse Gross, and Pravin B Shelar.
3) Fix PM resume locking in IGB driver, from Benjamin Poirier.
4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor.
5) Revert a bogus network namespace isolation change that was causing
regressions on S390 networking devices.
6) If bonding decides to process and handle a LACPDU frame, we
shouldn't bump the rx_dropped counter. From Jiri Bohac.
7) Fix mis-calculation of available TX space in r8169 driver when doing
TSO, which can lead to crashes and/or hung device. From Julien
Ducourthial.
8) SCTP does not validate cached routes properly in all cases, from
Nicolas Dichtel.
9) Link status interrupt needs to be handled in ks8851 driver, from
Stephen Boyd.
10) Use capable(), not cap_raised(), in connector/userns netlink code.
From Eric W. Biederman via Andrew Morton.
11) Fix pktgen OOPS on module unload, from Eric Dumazet.
12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet.
13) Cure division by zero in SFC driver, from Ben Hutchings.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
ks8851: Update link status during link change interrupt
macvtap: restore vlan header on user read
vhost-net: fix handle_rx buffer size
bonding: don't increase rx_dropped after processing LACPDUs
connector/userns: replace netlink uses of cap_raised() with capable()
sctp: check cached dst before using it
pktgen: fix crash at module unload
Revert "net: maintain namespace isolation between vlan and real device"
ehea: fix losing of NEQ events when one event occurred early
igb: fix rtnl race in PM resume path
ipv4: Do not use dead fib_info entries.
r8169: fix unsigned int wraparound with TSO
sfc: Fix division by zero when using one RX channel and no SR-IOV
openvswitch: Validation of IPv6 set port action uses IPv4 header
net: compare_ether_addr[_64bits]() has no ordering
cdc_ether: Ignore bogus union descriptor for RNDIS devices
bnx2x: bug fix when loading after SAN boot
e1000: Silence sparse warnings by correcting type
igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path
openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed.
...
Linus Torvalds [Sat, 12 May 2012 19:56:08 +0000 (12:56 -0700)]
Merge tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Pull device-mapper fixes from Alasdair G Kergon:
"Fix a couple of serious memory leaks in device-mapper thin
provisioning and tidy its MODULE_DESCRIPTION.
Mitigate occasional reported hangs associated with multipath scsi_dh
module loading."
* tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm mpath: check if scsi_dh module already loaded before trying to load
dm thin: correct module description
dm thin: fix unprotected use of prepared_discards list
dm thin: reinstate missing mempool_free in cell_release_singleton
Since cpufreq has no official maintainer at the moment, I'm willing
to maintain it along some other power management core code I've been
maintaining already.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Snitzer [Sat, 12 May 2012 00:43:21 +0000 (01:43 +0100)]
dm mpath: check if scsi_dh module already loaded before trying to load
If the requested scsi_dh module is already loaded then skip
request_module().
Multipath table loads can hang in an unnecessary __request_module.
Reported-by: Ben Marzinski <bmarzins@redhat.com> Cc: stable@kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Sat, 12 May 2012 00:43:16 +0000 (01:43 +0100)]
dm thin: fix unprotected use of prepared_discards list
Fix two places in commit 104655fd4dce ("dm thin: support discards") that
didn't use pool->lock to protect against concurrent changes to the
prepared_discards list.
Without this fix, thin_endio() can race with process_discard(), leading
to concurrent list_add()s that result in the processes locking up with
an error like the following:
projects / linux-beck.git / log