It was observed that calling bpf_get_stackid() from a kprobe inside
slub or from spin_unlock causes similar deadlock as with hashmap,
therefore convert stackmap to use pre-allocated memory.
The call_rcu is no longer feasible mechanism, since delayed freeing
causes bpf_get_stackid() to fail unpredictably when number of actual
stacks is significantly less than user requested max_entries.
Since elements are no longer freed into slub, we can push elements into
freelist immediately and let them be recycled.
However the very unlikley race between user space map_lookup() and
program-side recycling is possible:
cpu0 cpu1
---- ----
user does lookup(stackidX)
starts copying ips into buffer
delete(stackidX)
calls bpf_get_stackid()
which recyles the element and
overwrites with new stack trace
To avoid user space seeing a partial stack trace consisting of two
merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket);
to preserve consistent stack trace delivery to user space.
Now we can move memset(,0) of left-over element value from critical
path of bpf_get_stackid() into slow-path of user space lookup.
Also disallow lookup() from bpf program, since it's useless and
program shouldn't be messing with collected stack trace.
Note that similar race between user space lookup and kernel side updates
is also present in hashmap, but it's not a new race. bpf programs were
always allowed to modify hash and array map elements while user space
is copying them.
Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
bpf: check for reserved flag bits in array and stack maps
Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
If kprobe is placed on spin_unlock then calling kmalloc/kfree from
bpf programs is not safe, since the following dead lock is possible:
kfree->spin_lock(kmem_cache_node->lock)...spin_unlock->kprobe->
bpf_prog->map_update->kmalloc->spin_lock(of the same kmem_cache_node->lock)
and deadlocks.
The following solutions were considered and some implemented, but
eventually discarded
- kmem_cache_create for every map
- add recursion check to slow-path of slub
- use reserved memory in bpf_map_update for in_irq or in preempt_disabled
- kmalloc via irq_work
At the end pre-allocation of all map elements turned out to be the simplest
solution and since the user is charged upfront for all the memory, such
pre-allocation doesn't affect the user space visible behavior.
Since it's impossible to tell whether kprobe is triggered in a safe
location from kmalloc point of view, use pre-allocation by default
and introduce new BPF_F_NO_PREALLOC flag.
While testing of per-cpu hash maps it was discovered
that alloc_percpu(GFP_ATOMIC) has odd corner cases and often
fails to allocate memory even when 90% of it is free.
The pre-allocation of per-cpu hash elements solves this problem as well.
Turned out that bpf_map_update() quickly followed by
bpf_map_lookup()+bpf_map_delete() is very common pattern used
in many of iovisor/bcc/tools, so there is additional benefit of
pre-allocation, since such use cases are must faster.
Since all hash map elements are now pre-allocated we can remove
atomic increment of htab->count and save few more cycles.
Also add bpf_map_precharge_memlock() to check rlimit_memlock early to avoid
large malloc/free done by users who don't have sufficient limits.
Pre-allocation is done with vmalloc and alloc/free is done
via percpu_freelist. Here are performance numbers for different
pre-allocation algorithms that were implemented, but discarded
in favor of percpu_freelist:
pcpu_ida nolock is a modified percpu_ida algorithm without
percpu_ida_cpu locks and without cross-cpu tag stealing.
It's faster than existing percpu_ida, but not as fast as pcpu_freelist.
bt is a variant of block/blk-mq-tag.c simlified and customized
for bpf use case. bt w/smp_align is using cache line for every 'long'
(similar to blk-mq-tag). bt no/smp_align allocates 'long'
bitmasks continuously to save memory. It's comparable to percpu_ida
and in some cases faster, but slower than percpu_freelist
hlist+spinlock is the simplest free list with single spinlock.
As expeceted it has very bad scaling in SMP.
kmalloc is existing implementation which is still available via
BPF_F_NO_PREALLOC flag. It's significantly slower in single cpu and
in 8 cpu setup it's 3 times slower than pre-allocation with pcpu_freelist,
but saves memory, so in cases where map->max_entries can be large
and number of map update/delete per second is low, it may make
sense to use it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce simple percpu_freelist to keep single list of elements
spread across per-cpu singly linked lists.
/* push element into the list */
void pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *);
/* pop element from the list */
struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *);
The object is pushed to the current cpu list.
Pop first trying to get the object from the current cpu list,
if it's empty goes to the neigbour cpu list.
For bpf program usage pattern the collision rate is very low,
since programs push and pop the objects typically on the same cpu.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
if kprobe is placed within update or delete hash map helpers
that hold bucket spin lock and triggered bpf program is trying to
grab the spinlock for the same bucket on the same cpu, it will
deadlock.
Fix it by extending existing recursion prevention mechanism.
Note, map_lookup and other tracing helpers don't have this problem,
since they don't hold any locks and don't modify global data.
bpf_trace_printk has its own recursive check and ok as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 Mar 2016 20:16:51 +0000 (15:16 -0500)]
Merge branch 'ipv6-per-netns-gc'
Michal Kubecek says:
====================
ipv6: per netns FIB6 walkers and garbage collector
Commit 2ac3ac8f86f2 ("ipv6: prevent fib6_run_gc() contention") reduced
the risk of contention on FIB6 garbage collector lock on systems with
many CPUs. However, one of our customers can still observe heavy
contention on fib6_gc_lock which can even trigger the soft lockup
detector.
This is caused by garbage collector running in forced mode from a timer.
While there is one timer per network namespace, the instances of
fib6_run_gc() running from them are protected by one global spinlock so
that only one garbage collector can run at any moment and other
namespaces have to wait. As most relevant data structures are separated
per netns, there is little reason for garbage collectors blocking each
other.
Similar problem exists for walkers: changes in one tree do not need to
adjust (and block) walkers traversing FIB trees in other namespaces.
This series separates both the walkers infrastructure and garbage
collector so that they work independently in network namespaces.
v2: get rid of ifdef in ipv6_route_seq_setup_walk(), pass net from
callers instead
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Tue, 8 Mar 2016 13:44:45 +0000 (14:44 +0100)]
ipv6: per netns FIB garbage collection
One of our customers observed issues with FIB6 garbage collectors
running in different network namespaces blocking each other, resulting
in soft lockups (fib6_run_gc() initiated from timer runs always in
forced mode).
Now that FIB6 walkers are separated per namespace, there is no more need
for instances of fib6_run_gc() in different namespaces blocking each
other. There is still a call to icmp6_dst_gc() which operates on shared
data but this function is protected by its own shared lock.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Tue, 8 Mar 2016 13:44:35 +0000 (14:44 +0100)]
ipv6: per netns fib6 walkers
The IPv6 FIB data structures are separated per network namespace but
there is still only one global walkers list and one global walker list
lock. This means changes in one namespace unnecessarily interfere with
walkers in other namespaces.
Replace the global list with per-netns lists (and give each its own
lock).
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Tue, 8 Mar 2016 13:44:25 +0000 (14:44 +0100)]
ipv6: replace global gc_args with local variable
Global variable gc_args is only used in fib6_run_gc() and functions
called from it. As fib6_run_gc() makes sure there is at most one
instance of fib6_clean_all() running at any moment, we can replace
gc_args with a local variable which will be needed once multiple
instances (per netns) of garbage collector are allowed.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add pci_error_handler callbacks to support for pcie advanced error
recovery.
Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 7 Mar 2016 20:38:45 +0000 (15:38 -0500)]
bnxt_en: Add port statistics support.
Gather periodic port statistics if the device is PF and link is up. This
is triggered in bnxt_timer() every one second to request firmware to DMA
the counters.
Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 7 Mar 2016 20:38:43 +0000 (15:38 -0500)]
bnxt_en: Use common function to get ethtool supported flags.
The supported bits and advertising bits in ethtool have the same
definitions. The same is true for the firmware bits. So use the
common function to handle the conversion for both supported and
advertising bits.
v2: Don't use parentheses on function return.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Include the conversion of pause bits and add one extra call layer so
that the same refactored function can be reused to get the link partner
advertisement bits.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kyeong Yoo [Mon, 7 Mar 2016 04:07:57 +0000 (17:07 +1300)]
net_sched: dsmark: use qdisc_dequeue_peeked()
This fix is for dsmark similar to commit 3557619f0f6f7496ed453d4825e249
("net_sched: prio: use qdisc_dequeue_peeked")
and makes use of qdisc_dequeue_peeked() instead of direct dequeue() call.
First time, wrr peeks dsmark, which will then peek into sfq.
sfq dequeues an skb and it's stored in sch->gso_skb.
Next time, wrr tries to dequeue from dsmark, which will call sfq dequeue
directly. This results skipping the previously peeked skb.
So changed dsmark dequeue to call qdisc_dequeue_peeked() instead to use
peeked skb if exists.
Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for your net-next tree,
they are:
1) Remove useless debug message when deleting IPVS service, from
Yannick Brosseau.
2) Get rid of compilation warning when CONFIG_PROC_FS is unset in
several spots of the IPVS code, from Arnd Bergmann.
3) Add prandom_u32 support to nft_meta, from Florian Westphal.
4) Remove unused variable in xt_osf, from Sudip Mukherjee.
5) Don't calculate IP checksum twice from netfilter ipv4 defrag hook
since fixing af_packet defragmentation issues, from Joe Stringer.
6) On-demand hook registration for iptables from netns. Instead of
registering the hooks for every available netns whenever we need
one of the support tables, we register this on the specific netns
that needs it, patchset from Florian Westphal.
7) Add missing port range selection to nf_tables masquerading support.
BTW, just for the record, there is a typo in the description of 5f6c253ebe93b0 ("netfilter: bridge: register hooks only when bridge
interface is added") that refers to the cluster match as deprecated, but
it is actually the CLUSTERIP target (which registers hooks
inconditionally) the one that is scheduled for removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 8 Mar 2016 18:58:52 +0000 (13:58 -0500)]
Merge branch 'bpf-next'
Daniel Borkmann says:
====================
BPF updates
Couple of misc updates to BPF, besides others this series adds
bpf_csum_diff() to be used with L3 csums, allows for managing
tunnel options for collect meta data mode, and enabling ipv6
traffic class for collect meta data in vxlan specifically (geneve
already supports it). For more details, please see individual
patches.
The series requires net to be merged into net-next first to
avoid any further pending merge conflicts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 4 Mar 2016 14:15:07 +0000 (15:15 +0100)]
bpf, vxlan, geneve, gre: fix usage of dst_cache on xmit
The assumptions from commit 0c1d70af924b ("net: use dst_cache for vxlan
device"), 468dfffcd762 ("geneve: add dst caching support") and 3c1cb4d2604c
("net/ipv4: add dst cache support for gre lwtunnels") on dst_cache usage
when ip_tunnel_info is used is unfortunately not always valid as assumed.
While it seems correct for ip_tunnel_info front-ends such as OVS, eBPF
however can fill in ip_tunnel_info for consumers like vxlan, geneve or gre
with different remote dsts, tos, etc, therefore they cannot be assumed as
packet independent.
Right now vxlan, geneve, gre would cache the dst for eBPF and every packet
would reuse the same entry that was first created on the initial route
lookup. eBPF doesn't store/cache the ip_tunnel_info, so each skb may have
a different one.
Fix it by adding a flag that checks the ip_tunnel_info. Also the !tos test
in vxlan needs to be handeled differently in this context as it is currently
inferred from ip_tunnel_info as well if present. ip_tunnel_dst_cache_usable()
helper is added for the three tunnel cases, which checks if we can use dst
cache.
Fixes: 0c1d70af924b ("net: use dst_cache for vxlan device") Fixes: 468dfffcd762 ("geneve: add dst caching support") Fixes: 3c1cb4d2604c ("net/ipv4: add dst cache support for gre lwtunnels") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 4 Mar 2016 14:15:06 +0000 (15:15 +0100)]
bpf: support for access to tunnel options
After eBPF being able to programmatically access/manage tunnel key meta
data via commit d3aa45ce6b94 ("bpf: add helpers to access tunnel metadata")
and more recently also for IPv6 through c6c33454072f ("bpf: support ipv6
for bpf_skb_{set,get}_tunnel_key"), this work adds two complementary
helpers to generically access their auxiliary tunnel options.
Geneve and vxlan support this facility. For geneve, TLVs can be pushed,
and for the vxlan case its GBP extension. I.e. setting tunnel key for geneve
case only makes sense, if we can also read/write TLVs into it. In the GBP
case, it provides the flexibility to easily map the group policy ID in
combination with other helpers or maps.
I chose to model this as two separate helpers, bpf_skb_{set,get}_tunnel_opt(),
for a couple of reasons. bpf_skb_{set,get}_tunnel_key() is already rather
complex by itself, and there may be cases for tunnel key backends where
tunnel options are not always needed. If we would have integrated this
into bpf_skb_{set,get}_tunnel_key() nevertheless, we are very limited with
remaining helper arguments, so keeping compatibility on structs in case of
passing in a flat buffer gets more cumbersome. Separating both also allows
for more flexibility and future extensibility, f.e. options could be fed
directly from a map, etc.
Moreover, change geneve's xmit path to test only for info->options_len
instead of TUNNEL_GENEVE_OPT flag. This makes it more consistent with vxlan's
xmit path and allows for avoiding to specify a protocol flag in the API on
xmit, so it can be protocol agnostic. Having info->options_len is enough
information that is needed. Tested with vxlan and geneve.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 4 Mar 2016 14:15:05 +0000 (15:15 +0100)]
bpf: allow to propagate df in bpf_skb_set_tunnel_key
Added by 9a628224a61b ("ip_tunnel: Add dont fragment flag."), allow to
feed df flag into tunneling facilities (currently supported on TX by
vxlan, geneve and gre) as a hint from eBPF's bpf_skb_set_tunnel_key()
helper.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 4 Mar 2016 14:15:04 +0000 (15:15 +0100)]
bpf: make helper function protos static
They are only used here, so there's no reason they should not be static.
Only the vlan push/pop protos are used in the test_bpf suite.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 4 Mar 2016 14:15:03 +0000 (15:15 +0100)]
bpf: add flags to bpf_skb_store_bytes for clearing hash
When overwriting parts of the packet with bpf_skb_store_bytes() that
were fed previously into skb->hash calculation, we should clear the
current hash with skb_clear_hash(), so that a next skb_get_hash() call
can determine the correct hash related to this skb.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 4 Mar 2016 14:15:02 +0000 (15:15 +0100)]
bpf: allow bpf_csum_diff to feed bpf_l3_csum_replace as well
Commit 7d672345ed29 ("bpf: add generic bpf_csum_diff helper") added a
generic checksum diff helper that can feed bpf_l4_csum_replace() with
a target __wsum diff that is to be applied to the L4 checksum. This
facility is very flexible, can be cascaded, allows for adding, removing,
or diffing data, or for calculating the pseudo header checksum from
scratch, but it can also be reused for working with the IPv4 header
checksum.
Thus, analogous to bpf_l4_csum_replace(), add a case for header field
value of 0 to change the checksum at a given offset through a new helper
csum_replace_by_diff(). Also, in addition to that, this provides an
easy to use interface for feeding precalculated diffs f.e. coming from
a map. It nicely complements bpf_l3_csum_replace() that currently allows
only for csum updates of 2 and 4 byte diffs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix ordering of WEXT netlink messages so we don't see a newlink
after a dellink, from Johannes Berg.
2) Out of bounds access in minstrel_ht_set_best_prob_rage, from
Konstantin Khlebnikov.
3) Paging buffer memory leak in iwlwifi, from Matti Gottlieb.
4) Wrong units used to set initial TCP rto from cached metrics, also
from Konstantin Khlebnikov.
5) Fix stale IP options data in the SKB control block from leaking
through layers of encapsulation, from Bernie Harris.
6) Zero padding len miscalculated in bnxt_en, from Michael Chan.
7) Only CHECKSUM_PARTIAL packets should be passed down through GSO, fix
from Hannes Frederic Sowa.
8) Fix suspend/resume with JME networking devices, from Diego Violat
and Guo-Fu Tseng.
9) Checksums not validated properly in bridge multicast support due to
the placement of the SKB header pointers at the time of the check,
fix from Álvaro Fernández Rojas.
10) Fix hang/tiemout with r8169 if a stats fetch is done while the
device is runtime suspended. From Chun-Hao Lin.
11) The forwarding database netlink dump facilities don't track the
state of the dump properly, resulting in skipped/missed entries.
From Minoura Makoto.
12) Fix regression from a recent 3c59x bug fix, from Neil Horman.
13) Fix list corruption in bna driver, from Ivan Vecera.
14) Big endian machines crash on vlan add in bnx2x, fix from Michal
Schmidt.
15) Ethtool RSS configuration not propagated properly in mlx5 driver,
from Tariq Toukan.
16) Fix regression in PHY probing in stmmac driver, from Gabriel
Fernandez.
17) Fix SKB tailroom calculation in igmp/mld code, from Benjamin
Poirier.
18) A past change to skip empty routing headers in ipv6 extention header
parsing accidently caused fragment headers to not be matched any
longer. Fix from Florian Westphal.
19) eTSEC-106 erratum needs to be applied to more gianfar chips, from
Atsushi Nemoto.
20) Fix netdev reference after free via workqueues in usb networking
drivers, from Oliver Neukum and Bjørn Mork.
21) mdio->irq is now an array rather than a pointer to dynamic memory,
but several drivers were still trying to free it :-/ Fixes from
Colin Ian King.
22) act_ipt iptables action forgets to set the family field, thus LOG
netfilter targets don't work with it. Fix from Phil Sutter.
23) SKB leak in ibmveth when skb_linearize() fails, from Thomas Falcon.
24) pskb_may_pull() cannot be called with interrupts disabled, fix code
that tries to do this in vmxnet3 driver, from Neil Horman.
25) be2net driver leaks iomap'd memory on removal, fix from Douglas
Miller.
26) Forgotton RTNL mutex unlock in ppp_create_interface() error paths,
from Guillaume Nault.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (97 commits)
ppp: release rtnl mutex when interface creation fails
cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
tcp: fix tcpi_segs_in after connection establishment
net: hns: fix the bug about loopback
jme: Fix device PM wakeup API usage
jme: Do not enable NIC WoL functions on S0
udp6: fix UDP/IPv6 encap resubmit path
be2net: Don't leak iomapped memory on removal.
vmxnet3: avoid calling pskb_may_pull with interrupts disabled
net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
ibmveth: check return of skb_linearize in ibmveth_start_xmit
cdc_ncm: toggle altsetting to force reset before setup
usbnet: cleanup after bind() in probe()
mlxsw: pci: Correctly determine if descriptor queue is full
mlxsw: spectrum: Always decrement bridge's ref count
tipc: fix nullptr crash during subscription cancel
net: eth: altera: do not free array priv->mdio->irq
net/ethoc: do not free array priv->mdio->irq
net: sched: fix act_ipt for LOG target
asix: do not free array priv->mdio->irq
...
Linus Torvalds [Mon, 7 Mar 2016 23:23:25 +0000 (15:23 -0800)]
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Overlayfs bug fixes. All marked as -stable material"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: copy new uid/gid into overlayfs runtime inode
ovl: ignore lower entries when checking purity of non-directory entries
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: fix working on distributed fs as lower layer
It turns out that commit can cause problems for systems with multiple
GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid
graphics.
This got noticed originally in 4.4.4, where this patch had already
gotten back-ported, but 4.5-rc7 was verified to have the same problem.
Alexander Deucher says:
"It looks like you have a muxed system so I suspect what's happening is
that one of the display is being reported as connected for both the
IGP and the dGPU and then the desktop environment gets confused or
there some sort problem in the detect functions since the mux is not
switched to the dGPU. I don't see an easy fix unless Dave has any
ideas. I'd say just revert for now"
Guillaume Nault [Mon, 7 Mar 2016 18:36:44 +0000 (19:36 +0100)]
ppp: release rtnl mutex when interface creation fails
Add missing rtnl_unlock() in the error path of ppp_create_interface().
Fixes: 58a89ecaca53 ("ppp: fix lockdep splat in ppp_dev_uninit()") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Mon, 7 Mar 2016 20:15:36 +0000 (21:15 +0100)]
cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
usbnet_link_change will call schedule_work and should be
avoided if bind is failing. Otherwise we will end up with
scheduled work referring to a netdev which has gone away.
Instead of making the call conditional, we can just defer
it to usbnet_probe, using the driver_info flag made for
this purpose.
Fixes: 8a34b0ae8778 ("usbnet: cdc_ncm: apply usbnet_link_change") Reported-by: Andrey Konovalov <andreyknvl@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 2efd055c53c06 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guo-Fu Tseng [Sat, 5 Mar 2016 00:11:56 +0000 (08:11 +0800)]
jme: Fix device PM wakeup API usage
According to Documentation/power/devices.txt
The driver should not use device_set_wakeup_enable() which is the policy
for user to decide.
Using device_init_wakeup() to initialize dev->power.should_wakeup and
dev->power.can_wakeup on driver initialization.
And use device_may_wakeup() on suspend to decide if WoL function should
be enabled on NIC.
Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Guo-Fu Tseng [Sat, 5 Mar 2016 00:11:55 +0000 (08:11 +0800)]
jme: Do not enable NIC WoL functions on S0
Otherwise it might be back on resume right after going to suspend in
some hardware.
Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Fri, 4 Mar 2016 23:07:43 +0000 (15:07 -0800)]
hv_netvsc: Move subchannel waiting to rndis_filter_device_remove()
During hot add, vmbus_device_register() is called from vmbus_onoffer(), on
the same workqueue as the subchannel offer message work-queue, so
subchannel offer won't be processed until the vmbus_device_register()/...
/netvsc_probe() is done.
Also, vmbus_device_register() is called with channel_mutex locked, which
prevents subchannel processing too. So the "waiting for sub-channel
processing" will not success in hot add case. But, in usual module loading,
the netvsc_probe() is called from different code path, and doesn't fail.
This patch resolves the deadlock during NIC hot-add, and speeds up NIC
loading time.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bill Sommerfeld [Fri, 4 Mar 2016 22:47:21 +0000 (14:47 -0800)]
udp6: fix UDP/IPv6 encap resubmit path
IPv4 interprets a negative return value from a protocol handler as a
request to redispatch to a new protocol. In contrast, IPv6 interprets a
negative value as an error, and interprets a positive value as a request
for redispatch.
UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to
return a positive value for redispatch. Note that the socket's
encap_rcv hook still needs to return a negative value to request
dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to
identify the byte containing the next protocol.
Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Douglas Miller [Fri, 4 Mar 2016 21:36:56 +0000 (15:36 -0600)]
be2net: Don't leak iomapped memory on removal.
The adapter->pcicfg resource is either mapped via pci_iomap() or
derived from adapter->db. During be_remove() this resource was ignored
and so could remain mapped after remove.
Add a flag to track whether adapter->pcicfg was mapped or not, then
use that flag in be_unmap_pci_bars() to unmap if required.
Fixes: 25848c901 ("use PCI MMIO read instead of config read for errors") Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 4 Mar 2016 18:40:48 +0000 (13:40 -0500)]
vmxnet3: avoid calling pskb_may_pull with interrupts disabled
vmxnet3 has a function vmxnet3_parse_and_copy_hdr which, among other operations,
uses pskb_may_pull to linearize the header portion of an skb. That operation
eventually uses local_bh_disable/enable to ensure that it doesn't race with the
drivers bottom half handler. Unfortunately, vmxnet3 preforms this
parse_and_copy operation with a spinlock held and interrupts disabled. This
causes us to run afoul of the WARN_ON_ONCE(irqs_disabled()) warning in
local_bh_enable, resulting in this:
Fix it by splitting vmxnet3_parse_and_copy_hdr into two functions:
vmxnet3_parse_hdr, which sets up the internal/on stack ctx datastructure, and
pulls the skb (both of which can be done without holding the spinlock with irqs
disabled
and
vmxnet3_copy_header, which just copies the skb to the tx ring under the lock
safely.
tested and shown to correct the described problem. Applies cleanly to the head
of the net tree
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 7 Mar 2016 20:01:40 +0000 (15:01 -0500)]
Merge branch 'qed_hw_gro'
Manish Chopra says:
====================
qed/qede: Add hardware GRO support
This patch series enables hardware GRO and add support for handling
HW aggregated TCP packets in driver receive flow by skipping
software GRO handling in stack.
Please consider applying this series to net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Fri, 4 Mar 2016 17:35:06 +0000 (12:35 -0500)]
qede: Add slowpath/fastpath support and enable hardware GRO
This patch configures hardware to use GRO and adds support
for fastpath APIs to handle HW aggregated packets.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Fri, 4 Mar 2016 17:35:05 +0000 (12:35 -0500)]
qed/qede: Add infrastructure support for hardware GRO
This patch adds mainly structures and APIs prototype changes
in order to give support for qede slowpath/fastpath support
for the same.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Alpe [Fri, 4 Mar 2016 16:04:42 +0000 (17:04 +0100)]
tipc: move netlink policies to netlink.c
Make the c files less cluttered and enable netlink attributes to be
shared between files.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Fri, 4 Mar 2016 14:07:54 +0000 (14:07 +0000)]
arp: correct return value of arp_rcv
Currently, arp_rcv() always return zero on a packet delivery upcall.
To make its behavior more compliant with the way this API should be
used, this patch changes this to let it return NET_RX_SUCCESS when the
packet is proper handled, and NET_RX_DROP otherwise.
v1->v2:
If sanity check is failed, call kfree_skb() instead of consume_skb(), then
return the correct return value.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Thu, 3 Mar 2016 21:20:53 +0000 (22:20 +0100)]
cdc_ncm: toggle altsetting to force reset before setup
Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time. Briefly toggling the altsetting forces a function
reset regardless of the initial state.
This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Mon, 7 Mar 2016 10:31:10 +0000 (11:31 +0100)]
usbnet: cleanup after bind() in probe()
In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.
Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 7 Mar 2016 14:15:30 +0000 (15:15 +0100)]
mlxsw: pci: Correctly determine if descriptor queue is full
The descriptor queues for sending (SDQs) and receiving (RDQs) packets
are managed by two counters - producer and consumer - which are both
16-bit in size. A queue is considered full when the difference between
the two equals the queue's maximum number of descriptors.
However, if the producer counter overflows, then it's possible for the
full queue check to fail, as it doesn't take the overflow into account.
In such a case, descriptors already passed to the device - but for which
a completion has yet to be posted - will be overwritten, thereby causing
undefined behavior. The above can be achieved under heavy load (~30
netperf instances).
Fix that by casting the subtraction result to u16, preventing it from
being treated as a signed integer.
Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since we only support one VLAN filtering bridge we need to associate a
reference count with it, so that when the last port netdev leaves it, we
would know that a different bridge can be offloaded to hardware.
When a LAG device is memeber in a bridge and port netdevs are leaving
the LAG, we should always decrement the bridge's reference count, as it's
incremented for any port in the LAG.
Fixes: 4dc236c31733 ("mlxsw: spectrum: Handle port leaving LAG while bridged") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 3 Mar 2016 19:23:21 +0000 (14:23 -0500)]
tipc: remove pre-allocated message header in link struct
Until now, we have kept a pre-allocated protocol message header
aggregated into struct tipc_link. Apart from adding unnecessary
footprint to the link instances, this requires extra code both to
initialize and re-initialize it.
We now remove this sub-optimization. This change also makes it
possible to clean up the function tipc_build_proto_msg() and remove
a couple of small functions that were accessing the mentioned header.
In particular, we can replace all occurrences of the local function
call link_own_addr(link) with the generic tipc_own_addr(net).
Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: fix nullptr crash during subscription cancel
commit 4d5cfcba2f6e ('tipc: fix connection abort during subscription
cancel'), removes the check for a valid subscription before calling
tipc_nametbl_subscribe().
This will lead to a nullptr exception when we process a
subscription cancel request. For a cancel request, a null
subscription is passed to tipc_nametbl_subscribe() resulting
in exception.
In this commit, we call tipc_nametbl_subscribe() only for
a valid subscription.
Fixes: 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel') Reported-by: Anders Widell <anders.widell@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 3 Mar 2016 13:47:18 +0000 (13:47 +0000)]
net: eth: altera: do not free array priv->mdio->irq
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.
Issue detected using static analysis with CoverityScan
Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 3 Mar 2016 13:43:34 +0000 (13:43 +0000)]
net/ethoc: do not free array priv->mdio->irq
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.
Issue detected using static analysis with CoverityScan
Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter [Thu, 3 Mar 2016 13:34:14 +0000 (14:34 +0100)]
net: sched: fix act_ipt for LOG target
Before calling the destroy() or target() callbacks, the family parameter
field has to be initialized. Otherwise at least the LOG target will
refuse to work and upon removal oops the kernel.
Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 3 Mar 2016 13:27:56 +0000 (13:27 +0000)]
asix: do not free array priv->mdio->irq
Used to be allocated and required freeing, but now
priv->mdio->irq is now a fixed sized array and should no longer be
free'd.
Issue detected using static analysis with CoverityScan
Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Alpe [Thu, 3 Mar 2016 13:20:43 +0000 (14:20 +0100)]
tipc: make sure required IPv6 addresses are scoped
Make sure the user has provided a scope for multicast and link local
addresses used locally by a UDP bearer.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Alpe [Thu, 3 Mar 2016 13:20:42 +0000 (14:20 +0100)]
tipc: safely copy UDP netlink data from user
The netlink policy for TIPC_NLA_UDP_LOCAL and TIPC_NLA_UDP_REMOTE
is of type binary with a defined length. This causes the policy
framework to threat the defined length as maximum length.
There is however no protection against a user sending a smaller
amount of data. Prior to this patch this wasn't handled which could
result in a partially incomplete sockaddr_storage struct containing
uninitialized data.
In this patch we use nla_memcpy() when copying the user data. This
ensures a potential gap at the end is cleared out properly.
This was found by Julia with Coccinelle tool.
Reported-by: Daniel Borkmann <daniel@iogearbox.net> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Alpe [Thu, 3 Mar 2016 13:20:41 +0000 (14:20 +0100)]
tipc: don't check link reset on non existing link
Make sure we have a link before checking if it has been reset or not.
Prior to this patch tipc_link_is_reset() could be called with a non
existing link, resulting in a null pointer dereference.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Alpe [Thu, 3 Mar 2016 13:20:40 +0000 (14:20 +0100)]
tipc: add net device to skb before UDP xmit
Prior to this patch enabling a IPv4 UDP bearer caused a null pointer
dereference in iptunnel_xmit_stats(), when it tried to dereference the
net device from the skb. To resolve this we now point the skb device
to the net device resolved from the routing table.
Fixes: 039f50629b7f (ip_tunnel: Move stats update to iptunnel_xmit()) Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Atsushi Nemoto [Thu, 3 Mar 2016 00:07:51 +0000 (09:07 +0900)]
gianfar: Enable eTSEC-106 erratum w/a for MPC8548E Rev2
Enable workaround for MPC8548E erratum eTSEC 106,
"Excess delays when transmitting TOE=1 large frames".
(see commit 53fad77375ce "gianfar: Enable eTSEC-20 erratum w/a
for P2020 Rev1")
This erratum was fixed in Rev 3.1.x.
Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Wed, 2 Mar 2016 19:20:36 +0000 (11:20 -0800)]
act_ife: fix a typo in kmemdup() parameters
Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 6 Mar 2016 22:14:54 +0000 (14:14 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
"Tiny fixes branch this week, in fact only one patch.
Turns out the USB support for a Renesas board was developed on a
pre-release board that ended up being changed before shipping. To
avoid breakage on those boards, and avoid confusion, it's a reasonable
idea to patch now instead of later. There are no known users of the
pre-release variant any more"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: porter: remove enable prop from HS-USB device node
Linus Torvalds [Sun, 6 Mar 2016 21:51:27 +0000 (13:51 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Just two ARM fixes this time: one to fix the hyp-stub for older ARM
CPUs, and another to fix the set_memory_xx() permission functions to
deal with zero sizes correctly"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8544/1: set_memory_xx fixes
ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
Linus Torvalds [Sun, 6 Mar 2016 19:19:28 +0000 (11:19 -0800)]
Merge branch 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
"This contains three bug/build fixes"
* 'for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: use %lx format specifiers for unsigned longs
um: Export pm_power_off
Revert "um: Fix get_signal() usage"
Linus Torvalds [Sun, 6 Mar 2016 19:14:16 +0000 (11:14 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Another round of fixes for 4.5:
- Fix the use of an undocumented syntactial variant of the .type
pseudo op which is not supported by the LLVM assembler.
- Fix invalid initialization on S-cache-less systems.
- Fix possible information leak from the kernel stack for SIGFPE.
- Fix handling of copy_{from,to}_user() return value in KVM
- Fix the last instance of irq_to_gpio() which now was causing build
errors"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
MIPS: kvm: Fix ioctl error handling.
MIPS: scache: Fix scache init with invalid line size.
MIPS: Avoid variant of .type unsupported by LLVM Assembler
MIPS: jz4740: Fix surviving instance of irq_to_gpio()
Linus Torvalds [Sun, 6 Mar 2016 19:08:06 +0000 (11:08 -0800)]
Merge tag 'powerpc-4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- cxl: Fix PSL timebase synchronization detection from Frederic Barrat
- Fix oops when destroying hw_breakpoint event from Ravi Bangoria
- Avoid lbarx on e5500 from Scott Wood
* tag 'powerpc-4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/fsl-book3e: Avoid lbarx on e5500
powerpc/hw_breakpoint: Fix oops when destroying hw_breakpoint event
cxl: Fix PSL timebase synchronization detection
Linus Torvalds [Sun, 6 Mar 2016 18:50:00 +0000 (10:50 -0800)]
Merge tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver ids for 4.5-rc7, and the removal of a driver
we merged in 4.5-rc1 but it turns out it's not needed as the hardware
is the same as a driver we already have in the tree.
This was only figured out after doing a lot of cleanup on it, gotta
love vendor-provided drivers... The new device ids for the devices
for this driver will be added later on when testing is completed, but
for now, we will remove the driver to keep people from accidentally
cleaning it up.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: qcserial: add Sierra Wireless EM74xx device ID
Revert "USB: serial: add Moxa UPORT 11x0 driver"
USB: serial: option: add support for Quectel UC20
USB: serial: option: add support for Telit LE922 PID 0x1045
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
usb: chipidea: otg: change workqueue ci_otg as freezable
Commit db2f24dc240856fb1d78005307f1523b7b3c121b
was plain wrong. I did not realize the we are
allowed to loop here.
In fact we have to loop and must not return to userspace
before all SIGSEGVs have been delivered.
Other archs do this directly in their entry code, UML
does it here.
Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
Linus Torvalds [Sat, 5 Mar 2016 20:35:48 +0000 (12:35 -0800)]
Merge tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It's our tradition to get a high volume of fixes late at rc7: this
time, X32 ABI breakage was found and this resulted in a high number
LOCs. The necessary changes to ALSA core codes were fairly
straightforward, and more importantly, they are specific to X32, thus
should be safe to apply.
Other than that, rather a collection of small fixes:
- Removal of the code that blocks too long at closing the OSS
sequencer client (which was spotted by syzkaller, unsurprisingly)
- Fixes races at HD-audio HDMI i915 audio binding
- a few HDSP/HDPM zero-division fixes
- Quirks for HD-audio and USB-audio as usual"
* tag 'sound-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - hdmi defer to register acomp eld notifier
ALSA: hda - hdmi add wmb barrier for audio component
ALSA: hda - Fix mic issues on Acer Aspire E1-472
ALSA: seq: oss: Don't drain at closing a client
ALSA: usb-audio: Add a quirk for Plantronics DA45
ALSA: hdsp: Fix wrong boolean ctl value accesses
ALSA: hdspm: Fix zero-division
ALSA: hdspm: Fix wrong boolean ctl value accesses
ALSA: timer: Fix ioctls for X32 ABI
ALSA: timer: Fix broken compat timer user status ioctl
ALSA: rawmidi: Fix ioctls X32 ABI
ALSA: rawmidi: Use comapt_put_timespec()
ALSA: pcm: Fix ioctls for X32 ABI
ALSA: ctl: Fix ioctls for X32 ABI
Linus Torvalds [Sat, 5 Mar 2016 20:32:34 +0000 (12:32 -0800)]
Merge tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some last time changes before we stablize the new entity function
integer numbers at uAPI
- probe: fix erroneous return value on i2c/adp1653 driver
- fix tx 5v detect regression on adv7604 driver
- fix missing unlock on error in vpfe_prepare_pipeline() on
davinci_vpfe driver
* tag 'media/v4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] media: Sanitise the reserved fields of the G_TOPOLOGY IOCTL arguments
[media] media.h: postpone connectors entities
[media] media.h: use hex values for range offsets, move connectors base up.
[media] adv7604: fix tx 5v detect regression
[media] media.h: get rid of MEDIA_ENT_F_CONN_TEST
[media] [for,v4.5] media.h: increase the spacing between function ranges
[media] media: i2c/adp1653: probe: fix erroneous return value
[media] media: davinci_vpfe: fix missing unlock on error in vpfe_prepare_pipeline()
Zhang Shengju [Thu, 3 Mar 2016 01:16:57 +0000 (01:16 +0000)]
wireless: use reset to set mac header
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add
operation in set function.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Thu, 3 Mar 2016 01:16:56 +0000 (01:16 +0000)]
mac80211: use reset to set header pointer
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add
operation in set function.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Thu, 3 Mar 2016 01:16:55 +0000 (01:16 +0000)]
mac80211_hwsim: use reset to set mac header
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add
operation in set function.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Thu, 3 Mar 2016 01:16:54 +0000 (01:16 +0000)]
vxlan: use reset to set header pointers
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add operation
in set function.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 5 Mar 2016 02:47:18 +0000 (18:47 -0800)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvcimm fix from Dan Williams:
"One straggling fix for NVDIMM support.
The KVM/QEMU enabling for NVDIMMs has recently reached the point where
it is able to accept some ACPI _DSM requests from a guest VM. However
they immediately found that the 4.5-rc kernel is unusable because the
kernel's 'nfit' driver fails to load upon seeing a valid "not
supported" response from the virtual BIOS for an address range scrub
command.
It is not mandatory that a platform implement address range scrubbing,
so this fix from Vishal properly treats the 'not supported' response
as 'skip scrubbing and continue loading the driver'"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: Continue init even if ARS commands are unimplemented
Linus Torvalds [Sat, 5 Mar 2016 02:41:40 +0000 (18:41 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fairly simple fixes.
One is a regression with ipr firmware loading caused by one of the
trivial patches in the last merge window which failed to strip the \n
from the file name string, so now the firmware loader no longer works
leading to a lot of unhappy ipr users; fix by stripping the \n.
The second is a memory leak within SCSI: the BLK_PREP_INVALID state
was introduced a recent fix but we forgot to account for it correctly
when freeing state, resulting in memory leakage. Add the correct
state freeing in scsi_prep_return()"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ipr: Fix regression when loading firmware
SCSI: Free resources when we return BLKPREP_INVALID
Linus Torvalds [Sat, 5 Mar 2016 02:31:36 +0000 (18:31 -0800)]
Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Assorted fixes for libata drivers.
- Turns out HDIO_GET_32BIT ioctl was subtly broken all along.
- Recent update to ahci external port handling was incorrectly
marking hotpluggable ports as external making userland handle
devices connected to those ports incorrectly.
- ahci_xgene needs its own irq handler to work around a hardware
erratum. libahci updated to allow irq handler override.
- Misc driver specific updates"
* 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: ahci: don't mark HotPlugCapable Ports as external/removable
ahci: Workaround for ThunderX Errata#22536
libata: Align ata_device's id on a cacheline
Adding Intel Lewisburg device IDs for SATA
pata-rb532-cf: get rid of the irq_to_gpio() call
libata: fix HDIO_GET_32BIT ioctl
ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT.
ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
libahci: Implement the capability to override the generic ahci interrupt handler.
Linus Torvalds [Sat, 5 Mar 2016 02:17:17 +0000 (18:17 -0800)]
Merge branch 'for-linus2' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Round 2 of this. I cut back to the bare necessities, the patch is
still larger than it usually would be at this time, due to the number
of NVMe fixes in there. This pull request contains:
- The 4 core fixes from Ming, that fix both problems with exceeding
the virtual boundary limit in case of merging, and the gap checking
for cloned bio's.
- NVMe fixes from Keith and Christoph:
- Regression on larger user commands, causing problems with
reading log pages (for instance). This touches both NVMe,
and the block core since that is now generally utilized also
for these types of commands.
- Hot removal fixes.
- User exploitable issue with passthrough IO commands, if !length
is given, causing us to fault on writing to the zero
page.
- Fix for a hang under error conditions
- And finally, the current series regression for umount with cgroup
writeback, where the final flush would happen async and hence open
up window after umount where the device wasn't consistent. fsck
right after umount would show this. From Tejun"
* 'for-linus2' of git://git.kernel.dk/linux-block:
block: support large requests in blk_rq_map_user_iov
block: fix blk_rq_get_max_sectors for driver private requests
nvme: fix max_segments integer truncation
nvme: set queue limits for the admin queue
writeback: flush inode cgroup wb switches instead of pinning super_block
NVMe: Fix 0-length integrity payload
NVMe: Don't allow unsupported flags
NVMe: Move error handling to failed reset handler
NVMe: Simplify device reset failure
NVMe: Fix namespace removal deadlock
NVMe: Use IDA for namespace disk naming
NVMe: Don't unmap controller registers on reset
block: merge: get the 1st and last bvec via helpers
block: get the 1st and last bvec via helpers
block: check virt boundary in bio_will_gap()
block: bio: introduce helpers to get the 1st and last bvec
Linus Torvalds [Sat, 5 Mar 2016 02:06:49 +0000 (18:06 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Additional 4.5-rc6 fixes.
I have four patches today. I had previously thought I had submitted
two of them last week, but they were accidentally skipped :-(.
- One fix to an error path in the core
- One fix for RoCE in the core
- Two related fixes for the core/mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/core: Use GRH when the path hop-limit > 0
IB/{core, mlx5}: Fix input len in vendor part of create_qp/srq
IB/mlx5: Avoid using user-index for SRQs
IB/core: Fix missed clean call in registration path