Wolfram Sang [Tue, 19 Jul 2016 03:54:56 +0000 (05:54 +0200)]
Revert "i2c: core: Add function for finding the bus speed from ACPI"
This reverts commit 55d38d060e999ca1a3ea6eb132105a0301e4cd04. There were
too heavy merge conflicts and the driver code making use of this was not
ready yet anyhow. So, we wait one cycle.
Jean Delvare [Mon, 18 Jul 2016 10:39:43 +0000 (12:39 +0200)]
i2c: Update the description of I2C_SMBUS
We support the SMBus Host Notify protocol now.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The parameter description is from a previous implementation, update
it to describe the actual implementation.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
eeprom: at24: tweak the loop_until_timeout() macro
loop_until_timeout() replaced a do {} while loop in the at24 driver
with a for loop which, under certain circumstances (such as heavy load
or low value of the write_timeout argument), can lead to the code in
the loop never being executed.
Make sure that at least one iteration of the code enclosed within
loop_until_timeout() is always executed.
Suggested-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add a new read function to the at24 driver allowing to retrieve the
factory-programmed mac address embedded in chips from the at24mac
family.
These chips can be instantiated similarily to the at24cs family,
except that there's no way of having access to both the serial number
and the mac address at the same time - the user must instantiate
either an at24cs or at24mac device as both special memory areas are
accessible on the same slave address.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
eeprom: at24: support reading the serial number for 24csxx
The chips from the at24cs family have two memory areas - a regular
read-write block and a read-only area containing the serial number.
The latter is visible on a different slave address (the address of the
rw memory block + 0x08). In order to access both blocks the user needs
to instantiate a regular at24c device for the rw block address and a
corresponding at24cs device on the serial number block address.
Add a function that allows to access the serial number and assign it
to at24->read_func if the chip allows serial number read operations
and the driver was passed the relevant flag for this device.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
eeprom: at24: split at24_eeprom_write() into specialized functions
Split at24_eeprom_write() into three smaller functions - one for the
i2c operations and two for the smbus extensions (separate routines for
block and byte transfers). Assign them in at24_probe() depending on
the bus capabilities.
Also: in order to avoid duplications move code adjusting the count
argument into a separate function and use it for i2c and smbus block
writes (no need for a roll-over for byte writes as we're always
writing one byte).
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
eeprom: at24: split at24_eeprom_read() into specialized functions
Split at24_eeprom_read() into two smaller functions - one for the
i2c operations and one for the smbus extensions. Assign them in
at24_probe() depending on the bus capabilities.
Also: in order to avoid duplications move the comments related to
offset calculations above the at24_translate_offset() routine.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
eeprom: at24: call read/write functions via function pointers
The first step in simplifying the read and write functions is to call
them via function pointers stored in at24_data. When we eventually
split the routines into smaller ones (depending on whether they use
smbus or i2c operations) we'll simply assign them to said pointers
instead of checking the flags at runtime every time we read/write.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Align the arguments in broken lines with the arguments list's opening
brackets and make checkpatch.pl happy by converting 'unsigned' into
'unsigned int'.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In preparation for splitting at24_eeprom_write() & at24_eeprom_read()
into smaller, specialized routines move at24_read() below, so that it
won't be intertwined with the low-level EEPROM accessors.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Abhishek Sahu [Mon, 9 May 2016 12:44:31 +0000 (18:14 +0530)]
i2c: qup: Fixed the DMA segments length
1. The current QCOM I2C driver code is failing for transfer length
greater than 255. This is happening due to improper segments length
as the I2C DMA segments can be maximum of 256 bytes.
2. The transfer length tlen was being initialized with 0 for 256
bytes, which is being passed for DMA mappings resulting in improper
DMA mapping length.
This patch fixes the above said problems by initializing the block
count with the values calculated in qup_i2c_set_blk_data and calculating
the remaining length for last DMA segment. Also, the block data length
need to be decremented after each transfer. Additionally, this patch
corrects the tlen assignment for DMA mapping.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Abhishek Sahu [Mon, 9 May 2016 12:44:30 +0000 (18:14 +0530)]
i2c: qup: Cleared the error bits in ISR
1. Current QCOM I2C driver hangs when sending data to address 0x03-0x07
in some scenarios. The QUP controller generates invalid write in this
case, since these addresses are reserved for different bus formats.
2. Also, the error handling is done by I2C QUP ISR in the case of DMA
mode. The state need to be RESET in case of any error for clearing the
available data in FIFO, which otherwise leaves the BAM DMA controller
in hang state.
This patch fixes the above two issues by clearing the error bits from
I2C and QUP status in ISR in case of I2C error, QUP error and resets
the QUP state to clear the FIFO data.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The driver transfer to a message with NOACK always in any size.
If client (eg. EDID segment point message) needs NOACK condition, it can
use I2C_M_IGNORE_NAK flag.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Acked-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jarkko Nikula [Mon, 6 Jun 2016 11:26:22 +0000 (14:26 +0300)]
i2c: core: Add function for finding the bus speed from ACPI
ACPI 5 specification doesn't have property for the I2C bus speed but
I2cSerialBus resource descriptors which define each controller-slave
connection define the maximum speed supported by that connection.
Thus finding the maximum safe speed for the bus is to walk all
I2cSerialBus resources that are associated to I2C controller and use
the speed of slowest connection.
Add function i2c_acpi_find_bus_speed() to the i2c-core that adapter
drivers can call prior registering itself to core.
This implies two-step walk through the I2cSerialBus resources: call to
i2c_acpi_find_bus_speed() does the first scan and finds the safe bus
speed that adapter drivers can set up. Adapter driver registration does
the second scan when i2c-core creates the I2C slaves by calling the
i2c_acpi_register_devices(). In that way the bus speed is set in case
slave device probe gets called during registration and does
communication.
Implement this by reusing the existing ACPI I2C walk routines in the
i2c-core. Extend them so that slowest connection speed is saved during
the walk and I2C slaves are registered only when calling through the
i2c_acpi_register_devices() with the i2c_adapter pointer.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jarkko Nikula [Mon, 6 Jun 2016 11:26:21 +0000 (14:26 +0300)]
i2c: core: Cleanup I2C ACPI namespace
I2C ACPI enumeration was originally implemented in another module under
drivers/acpi/ but was later moved into i2c-core with added support for
I2C ACPI operation region.
Rename these acpi_i2c_ prefixed functions, structures and defines in
i2c-core to i2c_acpi_ in order to have more consistent name space.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Sat, 9 Jul 2016 04:35:03 +0000 (13:35 +0900)]
i2c: print more info when acpi_i2c_space_handler() fails
Use a warning loglevel instead of info and switch to dev_* for device
info. Also print which client was accessed.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Sat, 9 Jul 2016 04:35:00 +0000 (13:35 +0900)]
i2c: improve error messages in i2c_register_adapter()
Switch to WARN if no adapter name is given, otherwise we won't know who
missed to do that. Add error message if device registration fails.
Update error message for missing algo to match style of the others.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Sat, 9 Jul 2016 04:34:59 +0000 (13:34 +0900)]
i2c: cleanup i2c_register_adapter() by refactoring recovery init
Move recovery init to a seperate function to let have
i2c_register_adapter() less lines and to avoid goto and a label.
Refactor string handling there for consistency and to save some bytes.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Sat, 9 Jul 2016 04:34:58 +0000 (13:34 +0900)]
i2c: free idr when sanity checks in i2c_register_adapter() fail
On error, we should give idr back to the pool in any case.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Tanmay Jagdale [Mon, 20 Jun 2016 09:26:18 +0000 (14:56 +0530)]
i2c: xlp9xx: add ACPI support for Broadcom Vulcan
Added ACPI support for the I2C controller present on Broadcom's
Vulcan ARM64 processor. ACPI ID used by the controller is BRCM9007.
Changed the xlp9xx_i2c_get_frequency() function to use
device_property_read_u32() API so that the "clock-frequency" value
can be read from _DSD in ACPI mode.
Signed-off-by: Tanmay Jagdale <tanmay.jagdale@broadcom.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There is no code protecting i2c_dev to be freed after it is returned
from i2c_dev_get_by_minor() and using it to access the value which we
already have (minor) isn't safe really.
Avoid using it and get the adapter directly from 'minor'.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Mon, 20 Jun 2016 08:58:09 +0000 (11:58 +0300)]
i2c: designware-pci: clarify a comment for Merrifield
There are more than 7 busses, but only 7 are user visible. Update comment
accordingly.
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The i801 chip can handle the Host Notify feature since ICH 3 as mentioned
in http://www.intel.com/content/dam/doc/datasheet/82801ca-io-controller-hub-3-datasheet.pdf
Enable the functionality unconditionally and propagate the alert
on each notification.
With a T440s and a Synaptics touchpad that implements Host Notify, the
payload data is always 0x0000, so I am not sure if the device actually
sends the payload or if there is a problem regarding the implementation.
Tested-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Ellen Wang [Fri, 1 Jul 2016 20:42:15 +0000 (22:42 +0200)]
i2c: i801: recover from hardware PEC errors
On a CRC error while using hardware-supported PEC, an additional
error bit is set in the auxiliary status register. If this bit
isn't cleared, all subsequent operations will fail, essentially
hanging the controller.
The fix is simple: check, report, and clear the bit in
i801_check_post(). Also, in case the driver starts with the
hardware in that state, clear it in i801_check_pre() as well.
Signed-off-by: Ellen Wang <ellen@cumulusnetworks.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
[wsa: remove two empty lines while here] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
While here fix an indentation in one place and update a copyright line for
Intel.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Wed, 15 Jun 2016 15:05:06 +0000 (18:05 +0300)]
i2c: designware-pci: Introduce Merrifield support
This patch enables I2C controllers found on Intel Edison board.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Wed, 15 Jun 2016 15:05:05 +0000 (18:05 +0300)]
i2c: designware-pci: Make bus number allocation robust
On some platforms, such as Intel Medfield, the I2C slave devices are enumerated
through SFI tables where bus numbering is expected to be defined in the OS.
Make the bus number allocation robust for such platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jarkko Nikula [Thu, 10 Dec 2015 11:48:44 +0000 (13:48 +0200)]
i2c: designware: Allow build Baytrail semaphore support when IOSF_MBI=m
I believe i2c-designware-baytrail.c doesn't have strict dependency that
Intel SoC IOSF Sideband support must be always built-in in order to be
able to compile support for Intel Baytrail I2C bus sharing HW semaphore.
Redefine build dependencies so that CONFIG_IOSF_MBI=y is required only
when CONFIG_I2C_DESIGNWARE_PLATFORM is built-in.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: David Box <david.e.box@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Naveen Kaje [Thu, 5 May 2016 18:33:17 +0000 (12:33 -0600)]
i2c: qup: use address helper function in read transfer
qup_i2c_issue_read() derives the address from i2c_msg.
This called in the read path when I2C_M_RD flag is set.
Therefore, use the 8 bit address helper function.
Signed-off-by: Naveen Kaje <nkaje@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Sricharan R [Fri, 10 Jun 2016 18:08:21 +0000 (23:38 +0530)]
i2c: qup: Fix error handling
Among the bus errors reported from the QUP_MASTER_STATUS register
only NACK is considered and transfer gets suspended, while
other errors are ignored. Correct this and suspend the transfer
for other errors as well. This avoids unnecessary 'timeouts' which
happens when waiting for events that would never happen when there
is already an error condition on the bus. Also the error handling
procedure should be the same for both NACK and other bus errors in
case of dma mode. So correct that as well.
Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020)
Stack: (0xffffffc0368735c0 to 0xffffffc036874000)
sg_set_bug expects that the buf parameter passed in should be from
lowmem and a valid pageframe. This is not true for pages from
dma_alloc_coherent which can be carveouts, hence the check fails.
Change allocation of sg buffers from dma_coherent memory to kzalloc
to fix the issue. Note that now dma_map/unmap is used to make the
kzalloc'ed buffers coherent before passing it to the dmaengine.
Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 14:06:29 +0000 (22:06 +0800)]
i2c: rk3x: support fast-mode plus for rk3399
Implement fast mode plus that allows bus speeds of up to 1MHz.
Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 14:05:03 +0000 (22:05 +0800)]
i2c: rk3x: add i2c support for rk3399 soc
- new method to caculate i2c timings for rk3399:
There was an timing issue about "repeated start" time at the I2C
controller of version0, controller appears to drop SDA at .875x (7/8)
programmed clk high. On version 1 of the controller, the rule(.875x)
isn't enough to meet tSU;STA
requirements on 100k's Standard-mode. To resolve this issue,
sda_update_config, start_setup_config and stop_setup_config for I2C
timing information are added, new rules are designed to calculate
the timing information at new v1.
- pclk and function clk are separated at rk3399
Signed-off-by: David Wu <david.wu@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Douglas Anderson <dianders@chromium.org>
[wsa: fixed whitespace issue] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 14:04:12 +0000 (22:04 +0800)]
dt-bindings: i2c: rk3x: add support for rk3399
The bus clock and function clock are separated at rk3399,
and others use one clock as the bus clock and function clock.
Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 14:03:24 +0000 (22:03 +0800)]
i2c: rk3x: Move spec timing data to "static const" structs
The i2c timing specs are really just constant data. There's no reason
to write code to init them, so move them out to structures. This not
only is a cleaner solution but it will reduce code duplication when we
introduce a new variant of rk3x_i2c_calc_divs() in a future patch.
Signed-off-by: David Wu <david.wu@rock-chips.com> Suggested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 13:57:39 +0000 (21:57 +0800)]
i2c: rk3x: Change SoC data to not use array
Specifying the i2c SoC data in an array provides very little benefit and
gets unwieldly / confusing as the array grows since the next bit of code
needs to refer to elements in the array by their raw integral index.
Let's just create a single 'static const' structure for each SoC so that
we can refer to these structures by ID.
Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Suggested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 13:57:38 +0000 (21:57 +0800)]
i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
rk3x_i2c_setup() gets called directly before rk3x_i2c_start(),
and the last thing in setup was to clean the IPD, so no reason
to do it at the beginning of start.
Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 13:57:37 +0000 (21:57 +0800)]
i2c: rk3x: use struct "rk3x_i2c_calced_timings"
The "div_high" and "div_low" values are always used together.
Group them into a structure to make it easier to pass them
both around. This structure also provides a place for future
calculated timings.
Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
David Wu [Mon, 16 May 2016 13:57:36 +0000 (21:57 +0800)]
i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
Add kernel-doc documentation for the elements of the previously
undocumented struct rk3x_i2c.
Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
SMBus Host Notify allows a slave device to act as a master on a bus to
notify the host of an interrupt. On Intel chipsets, the functionality
is directly implemented in the firmware. We just need to export a
function to call .alert() on the proper device driver.
i2c_handle_smbus_host_notify() behaves like i2c_handle_smbus_alert().
When called, it schedules a task that will be able to sleep to go through
the list of devices attached to the adapter.
The current implementation allows one Host Notification to be scheduled
while an other is running.
Tested-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c: add a protocol parameter to the alert callback
.alert() is meant to be generic, but there is currently no way
for the device driver to know which protocol generated the alert.
Add a parameter in .alert() to help the device driver to understand
what is given in data.
This patch is required to have the support of SMBus Host Notify protocol
through .alert().
Tested-by: Andrew Duggan <aduggan@synaptics.com>
For hwmon: Acked-by: Guenter Roeck <linux@roeck-us.net>
For IPMI: Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Sun, 5 Jun 2016 09:41:42 +0000 (11:41 +0200)]
i2c: jz4780: drop superfluous init
David reported that the length for memset was incorrect (element sizes
were not taken into account). Then I saw that we are clearing kzalloced
memory, so we can simply drop this code.
Reported-by: David Binderman <dcb314@hotmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jean Delvare [Wed, 25 May 2016 07:37:02 +0000 (09:37 +0200)]
i2c: i801: Drop needless bit-wise OR
The interrupt handling code makes it look like several status values
may be merged together before being processed, while this will never
happen. Change from bit-wise OR to simple assignment to make it more
obvious and avoid misunderstanding.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c: Add generic support passing secondary devices addresses
Some I2C devices have multiple addresses assigned, for example each address
corresponding to a different internal register map page of the device.
So far drivers which need support for this have handled this with a driver
specific and non-generic implementation, e.g. passing the additional address
via platform data.
This patch provides a new helper function called i2c_new_secondary_device()
which is intended to provide a generic way to get the secondary address
as well as instantiate a struct i2c_client for the secondary address.
The function expects a pointer to the primary i2c_client, a name
for the secondary address and an optional default address. The name is used
as a handle to specify which secondary address to get.
The default address is used as a fallback in case no secondary address
was explicitly specified. In case no secondary address and no default
address were specified the function returns NULL.
For now the function only supports look-up of the secondary address
from devicetree, but it can be extended in the future
to for example support board files and/or ACPI.
Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Linus Torvalds [Sun, 12 Jun 2016 13:30:39 +0000 (06:30 -0700)]
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- fix an ordering issue in cpu cooling that cooling device is
registered before it's ready (freq_table being populated).
(Lukasz Luba)
- fix a missing comment update (Caesar Wang)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: add the note for set_trip_temp
thermal: cpu_cooling: fix improper order during initialization
Linus Torvalds [Sun, 12 Jun 2016 01:42:59 +0000 (18:42 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current series. This contains:
- Two fixes for xen-blkfront, from Bob Liu.
- A bug fix for NVMe, releasing only the specific resources we
requested.
- Fix for a debugfs flags entry for nbd, from Josef.
- Plug fix from Omar, fixing up a case of code being switched between
two functions.
- A missing bio_put() for the new discard callers of
submit_bio_wait(), fixing a regression causing a leak of the bio.
From Shaun.
- Improve dirty limit calculation precision in the writeback code,
fixing a case where setting a limit lower than 1% of memory would
end up being zero. From Tejun"
* 'for-linus' of git://git.kernel.dk/linux-block:
NVMe: Only release requested regions
xen-blkfront: fix resume issues after a migration
xen-blkfront: don't call talk_to_blkback when already connected to blkback
nbd: pass the nbd pointer for flags debugfs
block: missing bio_put following submit_bio_wait
blk-mq: really fix plug list flushing for nomerge queues
writeback: use higher precision calculation in domain_dirty_limits()
Linus Torvalds [Sun, 12 Jun 2016 01:03:39 +0000 (18:03 -0700)]
Merge tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A new bunch of GPIO fixes for v4.7.
This time I am very grateful that Ricardo Ribalda Delgado went in and
fixed my stupid refcounting mistakes in the removal path for GPIO
chips. I had a feeling something was wrong here and so it was. It
exploded on OMAP and it fixes their problem. Now it should be (more)
solid.
The rest i compilation, Kconfig and driver fixes. Some tagged for
stable.
Summary:
- Fix a NULL pointer dereference when we are searching the GPIO
device list but one of the devices have been removed (struct
gpio_chip pointer is NULL).
- Fix unaligned reference counters: we were ending on +3 after all
said and done. It should be 0. Remove an extraneous get_device(),
and call cdev_del() followed by device_del() in gpiochip_remove()
instead and the count goes to zero and calls the release() function
properly.
- Fix a compile warning due to a missing #include in the OF/device
tree portions.
- Select ANON_INODES for GPIOLIB, we're using that for our character
device. Some randconfig tests disclosed the problem.
- Make sure the Zynq driver clock runs also without CONFIG_PM enabled
- Fix an off-by-one error in the 104-DIO-48E driver
- Fix warnings in bcm_kona_gpio_reset()"
* tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
gpio: select ANON_INODES
gpio: include <linux/io-mapping.h> in gpiolib-of
gpiolib: Fix unaligned used of reference counters
gpiolib: Fix NULL pointer deference
gpio: zynq: initialize clock even without CONFIG_PM
gpio: 104-dio-48e: Fix control port offset computation off-by-one error
Linus Torvalds [Sat, 11 Jun 2016 18:42:08 +0000 (11:42 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two current fixes:
- one affects Qemu CD ROM emulation, which stopped working after the
updates in SCSI to require VPD pages from all conformant devices.
Fix temporarily by blacklisting Qemu (we can relax later when they
come into compliance).
- The other is a fix to the optimal transfer size. We set up a
minefield for ourselves by being confused about whether the limits
are in bytes or sectors (SCSI optimal is in blocks and the queue
parameter is in bytes).
This tries to fix the problem (wrong setting for queue limits
max_sectors) and make the problem more obvious by introducing a
wrapper function"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
sd: Fix rw_max for devices that report an optimal xfer size
scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
Linus Torvalds [Sat, 11 Jun 2016 18:24:54 +0000 (11:24 -0700)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- a bigger fix for i801 to finally be able to be loaded on some
machines again
- smaller driver fixes
- documentation update because of a renamed file
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: reg: Provide of_match_table
i2c: mux: refer to i2c-mux.txt
i2c: octeon: Avoid printk after too long SMBUS message
i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
Linus Torvalds [Sat, 11 Jun 2016 17:55:30 +0000 (10:55 -0700)]
Merge tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux
Pull uvc compat XU ioctl fixes from Andy Lutomirski:
"uvc's compat XU ioctls go through tons of potentially buggy
indirection. The first patch removes the indirection. The second one
cleans up the code.
Compile-tested only. I have the hardware, but I have absolutely no
idea what XU does, how to use it, what software to recompile as
32-bit, or what to test in that software"
* tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
uvc_v4l2: Simplify compat ioctl implementation
uvc: Forward compat ioctls to their handlers directly
Linus Torvalds [Fri, 10 Jun 2016 21:13:27 +0000 (14:13 -0700)]
Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Has some fixes and some new self tests for btrfs. The self tests are
usually disabled in the .config file (unless you're doing btrfs dev
work), and this bunch is meant to find problems with the 64K page size
patches.
Jeff has a patch to help people see if they are using the hardware
assist crc32c module, which really helps us nail down problems when
people ask why crcs are using so much CPU.
Otherwise, it's small fixes"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system
Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize
Btrfs: self-tests: Use macros instead of constants and add missing newline
Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes
Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE
btrfs: advertise which crc32c implementation is being used at module load
Btrfs: add validadtion checks for chunk loading
Btrfs: add more validation checks for superblock
Btrfs: clear uptodate flags of pages in sys_array eb
Btrfs: self-tests: Support non-4k page size
Btrfs: Fix integer overflow when calculating bytes_per_bitmap
Btrfs: test_check_exists: Fix infinite loop when searching for free space entries
Btrfs: end transaction if we abort when creating uuid root
btrfs: Use __u64 in exported linux/btrfs.h.
Linus Torvalds [Fri, 10 Jun 2016 19:23:49 +0000 (12:23 -0700)]
Merge tag 'powerpc-4.7-3Michael Ellerman:' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from
- ptrace: Fix out of bounds array access warning from Khem Raj
- pseries: Fix PCI config address for DDW from Gavin Shan
- pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
from Michael Ellerman
- of: fix autoloading due to broken modalias with no 'compatible' from
Wolfram Sang
- radix: Fix always false comparison against MMU_NO_CONTEXT from Aneesh
Kumar K.V
- hash: Compute the segment size correctly for ISA 3.0 from Aneesh
Kumar K.V
- nohash: Fix build break with 64K pages from Michael Ellerman
* tag 'powerpc-4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/nohash: Fix build break with 64K pages
powerpc/mm/hash: Compute the segment size correctly for ISA 3.0
powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT
of: fix autoloading due to broken modalias with no 'compatible'
powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
powerpc/pseries: Fix PCI config address for DDW
powerpc/ptrace: Fix out of bounds array access warning
Linus Torvalds [Fri, 10 Jun 2016 19:18:34 +0000 (12:18 -0700)]
Merge tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- fix regression in fam15h_power driver
- minor variable type fix in lm90 driver
- document compatible statement for ina2xx driver
* tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) use proper type for update_interval
hwmon: (ina2xx) Document compatible for INA231
hwmon: (fam15h_power) Disable preemption when reading registers
Linus Torvalds [Fri, 10 Jun 2016 19:10:02 +0000 (12:10 -0700)]
Merge branch 'stacking-fixes' (vfs stacking fixes from Jann)
Merge filesystem stacking fixes from Jann Horn.
* emailed patches from Jann Horn <jannh@google.com>:
sched: panic on corrupted stack end
ecryptfs: forbid opening files without mmap handler
proc: prevent stacking filesystems on top
Jann Horn [Wed, 1 Jun 2016 09:55:07 +0000 (11:55 +0200)]
sched: panic on corrupted stack end
Until now, hitting this BUG_ON caused a recursive oops (because oops
handling involves do_exit(), which calls into the scheduler, which in
turn raises an oops), which caused stuff below the stack to be
overwritten until a panic happened (e.g. via an oops in interrupt
context, caused by the overwritten CPU index in the thread_info).
Jann Horn [Wed, 1 Jun 2016 09:55:06 +0000 (11:55 +0200)]
ecryptfs: forbid opening files without mmap handler
This prevents users from triggering a stack overflow through a recursive
invocation of pagefault handling that involves mapping procfs files into
virtual memory.
Jann Horn [Wed, 1 Jun 2016 09:55:05 +0000 (11:55 +0200)]
proc: prevent stacking filesystems on top
This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem. There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.
(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)
Linus Torvalds [Fri, 10 Jun 2016 18:57:17 +0000 (11:57 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"A fix for an issue that Alex saw whilst swapping with hardware
access/dirty bit support enabled in the kernel: Fix a failure to fault
in old pages on a write when CONFIG_ARM64_HW_AFDBM is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: always take dirty state from new pte in ptep_set_access_flags
Linus Torvalds [Fri, 10 Jun 2016 18:36:04 +0000 (11:36 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes from all around the map, plus a commit that introduces a
new header of Intel model name symbols (unused) that will make the
next merge window easier"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer models
x86/cpu/intel: Introduce macros for Intel family numbers
x86, build: copy ldlinux.c32 to image.iso
x86/msr: Use the proper trace point conditional for writes
Linus Torvalds [Fri, 10 Jun 2016 18:15:41 +0000 (11:15 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A handful of tooling fixes, two PMU driver fixes and a cleanup of
redundant code that addresses a security analyzer false positive"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove a redundant check
perf/x86/intel/uncore: Remove SBOX support for Broadwell server
perf ctf: Convert invalid chars in a string before set value
perf record: Fix crash when kptr is restricted
perf symbols: Check kptr_restrict for root
perf/x86/intel/rapl: Fix pmus free during cleanup
Linus Torvalds [Fri, 10 Jun 2016 17:53:46 +0000 (10:53 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes:
- a file-based futex fix
- one more spin_unlock_wait() fix
- a ww-mutex deadlock detection improvement/fix
- and a raw_read_seqcount_latch() barrier fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Calculate the futex key based on a tail page for file-based futexes
locking/qspinlock: Fix spin_unlock_wait() some more
locking/ww_mutex: Report recursive ww_mutex locking early
locking/seqcount: Re-fix raw_read_seqcount_latch()
Linus Torvalds [Fri, 10 Jun 2016 17:47:22 +0000 (10:47 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two fixes: a regression/crash fix, and a message output fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Fix the format of EFI debug messages
efi: Fix for_each_efi_memory_desc_in_map() for empty memmaps
1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal.
2) Revert some msleep conversions in rtlwifi as these spots are in
atomic context, from Larry Finger.
3) Validate that NFTA_SET_TABLE attribute is actually specified when we
call nf_tables_getset(). From Phil Turnbull.
4) Don't do mdio_reset in stmmac driver with spinlock held as that can
sleep, from Vincent Palatin.
5) sk_filter() does things other than run a BPF filter, so we should
not elide it's call just because sk->sk_filter is NULL. Fix from
Eric Dumazet.
6) Fix missing backlog updates in several packet schedulers, from Cong
Wang.
7) bnx2x driver should allow VLAN add/remove while the interface is
down, from Michal Schmidt.
8) Several RDS/TCP race fixes from Sowmini Varadhan.
9) fq_codel scheduler doesn't return correct queue length in dumps,
from Eric Dumazet.
10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from
Yuchung Cheng.
11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(),
from Guillaume Nault.
12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian
Westphal.
13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling,
from Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
vmxnet3: segCnt can be 1 for LRO packets
packet: compat support for sock_fprog
stmmac: fix parameter to dwmac4_set_umac_addr()
net/mlx5e: Fix blue flame quota logic
net/mlx5e: Use ndo_stop explicitly at shutdown flow
net/mlx5: E-Switch, always set mc_promisc for allmulti vports
net/mlx5: E-Switch, Modify node guid on vf set MAC
net/mlx5: E-Switch, Fix vport enable flow
net/mlx5: E-Switch, Use the correct error check on returned pointers
net/mlx5: E-Switch, Use the correct free() function
net/mlx5: Fix E-Switch flow steering capabilities check
net/mlx5: Fix flow steering NIC capabilities check
net/mlx5: Fix root flow table update
net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
net/mlx5: Fix masking of reserved bits in XRCD number
net/mlx5: Fix the size of modify QP mailbox
mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
mlxsw: spectrum: Make split flow match firmware requirements
wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
cfg80211: remove get/set antenna and tx power warnings
...
Linus Torvalds [Fri, 10 Jun 2016 15:27:30 +0000 (08:27 -0700)]
Merge tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We have only few, mainly HD-audio device-specific fixes. Realtek
codec driver got a slightly more LOC, but they are all for the new
codec chip, and won't affect others at all"
* tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add PCI ID for Kabylake
ALSA: hda/realtek: Add T560 docking unit fixup
ALSA: hda - Fix headset mic detection problem for Dell machine
ALSA: uapi: Add three missing header files to Kbuild file
ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
ALSA: hda/realtek - ALC256 speaker noise issue
Linus Torvalds [Fri, 10 Jun 2016 15:21:06 +0000 (08:21 -0700)]
Merge tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This weeks instalment of fixes:
amdgpu:
Lots of memory leak and firmware leak fixes
nouveau:
Collection of display fixes, KASAN fixes
vc4:
vblank/pageflipping fixes
fsl-dcu:
Regmap cache fix
omap:
Unused variable warning fix.
Nothing too surprising so far"
* tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits)
drm/amdgpu: fix warning with powerplay disabled.
drm/amd/powerplay: delete useless code as pptable changed in vbios.
drm/amd/powerplay: fix bug visit array out of bounds
drm/amdgpu: fix smu ucode memleak (v2)
drm/amdgpu: add release firmware for cgs
drm/amdgpu: fix tonga smu_fini mem leak
drm/amdgpu: fix fiji smu fini mem leak
drm/amdgpu: fix cik sdma ucode memleak
drm/amdgpu: fix sdma24 ucode mem leak
drm/amdgpu: fix sdma3 ucode mem leak
drm/amdgpu: fix uvd fini mem leak
drm/amdgpu: fix gfx 7 ucode mem leak
drm/amdgpu: fix gfx8 ucode mem leak
drm/amdgpu: fix missing free wb for cond_exec
drm/amdgpu: fix memleak in pptable_init
drm/amdgpu: fix mem leak in atombios
drm/amdgpu: fix mem leak in pplib/hwmgr
drm/amdgpu: fix mem leak in smumgr
drm/amdgpu: add pipeline sync while vmid switch in same ctx
drm/amdgpu: vBIOS post only call when mem_size zero
...
Linus Torvalds [Fri, 10 Jun 2016 15:15:37 +0000 (08:15 -0700)]
Merge tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"A recently introduced boot regression related to the ACPI EC
initialization is addressed by restoring the previous behavior (Lv
Zheng)"
* tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
Linus Torvalds [Fri, 10 Jun 2016 15:09:12 +0000 (08:09 -0700)]
Merge tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Stable-candidate fixes for the intel_pstate driver and the cpuidle
core.
Specifics:
- Fix two intel_pstate initialization issues, one of which was
introduced during the 4.4 cycle (Srinivas Pandruvada)
- Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset
(Catalin Marinas)"
* tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
Linus Torvalds [Fri, 10 Jun 2016 15:00:47 +0000 (08:00 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/fadvise.c: do not discard partial pages with POSIX_FADV_DONTNEED
mm: introduce dedicated WQ_MEM_RECLAIM workqueue to do lru_add_drain_all
kernel/relay.c: fix potential memory leak
mm: thp: broken page count after commit aa88b68c3b1d
revert "mm: memcontrol: fix possible css ref leak on oom"
kasan: change memory hot-add error messages to info messages
mm/hugetlb: fix huge page reserve accounting for private mappings
Rui Wang [Wed, 8 Jun 2016 06:59:52 +0000 (14:59 +0800)]
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
On a 4-socket Brickland system, hot-removing one ioapic is fine.
Hot-removing the 2nd one causes panic in mp_unregister_ioapic()
while calling release_resource().
It is because the iomem_res pointer has already been released
when removing the first ioapic.
To explain the use of &res[num] here: res is assigned to ioapic_resources,
and later in ioapic_insert_resources() we do:
Here 'r' is treated as an arry of 'struct resource', and the r++ ensures
that each element of the array is inserted separately. Thus we should call
release_resouce() on each element at &res[num].
Fix it by assigning the correct pointers to ioapics[i].iomem_res in
ioapic_setup_resources().
Andy Lutomirski [Tue, 24 May 2016 22:54:04 +0000 (15:54 -0700)]
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
Forcing in_interrupt() to return true if we're not in a bona fide
interrupt confuses the softirq code. This fixes warnings like:
NOHZ: local_softirq_pending 282
... which can happen when running things like selftests/x86.
This will change perf's static percpu buffer usage in IST context.
I think this is okay, and it's changing the behavior to match
historical (pre-4.0) behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 959274753857 ("x86, traps: Track entry into and exit from IST context") Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Socket option PACKET_FANOUT_DATA takes a struct sock_fprog as argument
if PACKET_FANOUT has mode PACKET_FANOUT_CBPF. This structure contains
a pointer into user memory. If userland is 32-bit and kernel is 64-bit
the two disagree about the layout of struct sock_fprog.
Add compat setsockopt support to convert a 32-bit compat_sock_fprog to
a 64-bit sock_fprog. This is analogous to compat_sock_fprog support for
SO_REUSEPORT added in commit 1957598840f4 ("soreuseport: add compat
case for setsockopt SO_ATTACH_REUSEPORT_CBPF").
Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Wed, 8 Jun 2016 18:21:17 +0000 (19:21 +0100)]
stmmac: fix parameter to dwmac4_set_umac_addr()
The dwmac4_set_umac_addr() takes a struct mac_device_info as
the first parameter, but is being passed a ioaddr instead from
dwmac4_set_filter(). Fix the warning/bug by changing the first
parameter.
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] <asn:2>*ioaddr
Note, only compile tested this as do not have any
hardware with it in.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 10 Jun 2016 05:06:27 +0000 (22:06 -0700)]
Merge branch 'mlx5-fixes'
Saeed Mahameed says:
====================
Mellanox 100G mlx5 fixes for 4.7-rc
The following series provides some small fixes for mlx5 driver.
Two small fixes for the mlx5e netdev, the 1st is for the blue flame
quota accounting and the 2nd is a small refactoring in shutdown flow.
Five trivial fixes for mlx5 E-Switch.
- Allmulti mc_promisc flag was not set in a specific flow.
- Modify VF node guid when admin mac is changed.
- Race in vport enable flow.
- Misc code fixes (kvfree when needed and error pointers checking).
Three in mlx5 steering area. Correct capabilities checking and root flow table update.
Three misc fixes in mlx5 commands enum and layouts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Thu, 9 Jun 2016 21:07:40 +0000 (00:07 +0300)]
net/mlx5e: Fix blue flame quota logic
Blue flame is a latency enhancement feature that allows the driver to
write the packet data directly to the NIC's registers thus making the
read of the packet data from host memory redundant.
We maintain a quota for the blue flame which is reloaded whenever we
identify that the hardware is processing send requests and processes
them fast enough so by the time we post the next send request it was
able to process all the pending ones. This indicates that the hardware
is capable of processing more blue flame requests efficiently. The blue
flame quota is decremented whenever we send using blue flame.
The current code erroneously clears the budget if we did not use blue
flame for the current post send operation and we fix it here.
Fixes: 88a85f99e51f ('net/mlx5e: TX latency optimization to save DMA reads') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 9 Jun 2016 21:07:39 +0000 (00:07 +0300)]
net/mlx5e: Use ndo_stop explicitly at shutdown flow
The current implementation copies the flow of ndo_stop instead of
calling it explicitly, Fixed it.
Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Noa Osherovich [Thu, 9 Jun 2016 21:07:37 +0000 (00:07 +0300)]
net/mlx5: E-Switch, Modify node guid on vf set MAC
In RoCE, the RDMA-CM needs the node guid to establish connection
between nodes.
Today, the node guid exposed to mlx5 Ethernet VFs is zero, therefore
RDMA-CM on the VF is broken.
Whenever the administrator sets a MAC for a VF, derive the node guid
from it and set it as well in the following way:
MAC: e4:1d:2d:b3:f4:01 -> node_guid: e4:1d:2d:ff:fe:b3:f4:01
Fixes: 77256579c6b43 ('net/mlx5: E-Switch, Introduce Vport...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder vport enable flow to mark the vport as enabled before calling
the vport change handler which was modified to handle the case for
when vport is not enabled.
This fixes the case for when the PF netdev is open before sriov is
enabled, once sriov is enabled at esw_enable_vport,
esw_vport_change_handle_locked didn't read the PF context since it
thought the PF vport was not enabled.
When we enable the vport, arming for events is not required anymore,
since it's done on the vport change handle
Fixes: 586cfa7f1d58 ('net/mlx5: E-Switch, Use vport event handler for vport cleanup') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log