net: ethernet: cisco: enic: enic_dev: Remove some unused functions
Removes some functions that are not used anywhere:
enic_dev_enable2_done() enic_dev_enable2() enic_dev_deinit_done()
enic_dev_init_prov2() enic_vnic_dev_deinit()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Wed, 31 Dec 2014 12:33:41 +0000 (13:33 +0100)]
net: skbuff: don't zero tc members when freeing skb
Not needed, only four cases:
- kfree_skb (or one of its aliases).
Don't need to zero, memory will be freed.
- kfree_skb_partial and head was stolen: memory will be freed.
- skb_morph: The skb header fields (including tc ones) will be
copied over from the 'to-be-morphed' skb right after
skb_release_head_state returns.
- skb_segment: Same as before, all the skb header
fields are copied over from the original skb right away.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Here's the first batch of bluetooth patches for 3.20.
- Cleanups & fixes to ieee802154 drivers
- Fix synchronization of mgmt commands with respective HCI commands
- Add self-tests for LE pairing crypto functionality
- Remove 'BlueFritz!' specific handling from core using a new quirk flag
- Public address configuration support for ath3012
- Refactor debugfs support into a dedicated file
- Initial support for LE Data Length Extension feature from Bluetooth 4.2
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Stringer [Wed, 31 Dec 2014 03:10:16 +0000 (19:10 -0800)]
geneve: Add Geneve GRO support
This results in an approximately 30% increase in throughput
when handling encapsulated bulk traffic.
Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the only tunnel protocol that supports GRO with encapsulated
Ethernet is VXLAN. This pulls out the Ethernet code into a proper layer
so that it can be used by other tunnel protocols such as GRE and Geneve.
Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roger Chen [Mon, 29 Dec 2014 09:43:36 +0000 (17:43 +0800)]
GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC
This driver is based on stmmac driver.
changes since v2:
- use tab instead of space for macros
- use HIWORD_UPDATE macro for GMAC_CLK_RX_DL_CFG and GMAC_CLK_TX_DL_CFG
- remove drive-strength setting in the driver and set it in the pinctrl settings
- use dev_err instead of pr_err
- remove clock names's macros, just use the real name of the clock
- use devm_clk_get() instead of clk_get()
- remove clk_set_parent(bsp_priv->clk_mac, bsp_priv->clk_mac_pll)
- remove gpio setting for LDO, just use regulator API
- remove phy reset using gpio in the glue layer, it has been handled in the stmmac driver
- remove handling phy interrupt (mii interrupt)
changes since v1:
- use BIT() to set register
- combine two remap_write() operations into one for the same register
- use macros for register value setting
- remove grf fail check in rk_gmac_setup() and save all the check in set_rgmii_speed()
- remove .tx_coe=1 in rk_gmac_data
Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Dec 2014 23:26:02 +0000 (18:26 -0500)]
Merge branch 'fib_trie-next'
Alexander Duyck says:
====================
fib_trie: Reduce time spent in fib_table_lookup by 35 to 75%
These patches are meant to address several performance issues I have seen
in the fib_trie implementation, and fib_table_lookup specifically. With
these changes in place I have seen a reduction of up to 35 to 75% for the
total time spent in fib_table_lookup depending on the type of search being
performed.
On a VM running in my Corei7-4930K system with a trie of maximum depth of 7
this resulted in a reduction of over 370ns per packet in the total time to
process packets received from an ixgbe interface and route them to a dummy
interface. This represents a failed lookup in the local trie followed by
a successful search in the main trie.
In the simple case of receiving a frame and dropping it before it can reach
the socket layer I saw a reduction of 40ns per packet. This represents a
trip through the local trie with the correct leaf found with no need for
any backtracing.
These changes have resulted in several functions being inlined such as
check_leaf and fib_find_node, but due to the code simplification the
overall size of the code has been reduced.
text data bss dec hex filename
16932 376 16 17324 43ac net/ipv4/fib_trie.o - before
15259 376 8 15643 3d1b net/ipv4/fib_trie.o - after
Changes since RFC:
Replaced this_cpu_ptr with correct call to this_cpu_inc in patch 1
Changed test for leaf_info mismatch to (key ^ n->key) & li->mask_plen in patch 10
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:57:08 +0000 (10:57 -0800)]
fib_trie: Add tracking value for suffix length
This change adds a tracking value for the maximum suffix length of all
prefixes stored in any given tnode. With this value we can determine if we
need to backtrace or not based on if the suffix is greater than the pos
value.
By doing this we can reduce the CPU overhead for lookups in the local table
as many of the prefixes there are 32b long and have a suffix length of 0
meaning we can immediately backtrace to the root node without needing to
test any of the nodes between it and where we ended up.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:57:02 +0000 (10:57 -0800)]
fib_trie: Remove checks for index >= tnode_child_length from tnode_get_child
For some reason the compiler doesn't seem to understand that when we are in
a loop that runs from tnode_child_length - 1 to 0 we don't expect the value
of tn->bits to change. As such every call to tnode_get_child was rerunning
tnode_chile_length which ended up consuming quite a bit of space in the
resultant assembly code.
I have gone though and verified that in all cases where tnode_get_child
is used we are either winding though a fixed loop from tnode_child_length -
1 to 0, or are in a fastpath case where we are verifying the value by
either checking for any remaining bits after shifting index by bits and
testing for leaf, or by using tnode_child_length.
size net/ipv4/fib_trie.o
Before:
text data bss dec hex filename
15506 376 8 15890 3e12 net/ipv4/fib_trie.o
After:
text data bss dec hex filename
14827 376 8 15211 3b6b net/ipv4/fib_trie.o
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:55 +0000 (10:56 -0800)]
fib_trie: inflate/halve nodes in a more RCU friendly way
This change pulls the node_set_parent functionality out of put_child_reorg
and instead leaves that to the function to take care of as well. By doing
this we can fully construct the new cluster of tnodes and all of the
pointers out of it before we start routing pointers into it.
I am suspecting this will likely fix some concurency issues though I don't
have a good test to show as such.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:49 +0000 (10:56 -0800)]
fib_trie: Push tnode flushing down to inflate/halve
This change pushes the tnode freeing down into the inflate and halve
functions. It makes more sense here as we have a better grasp of what is
going on and when a given cluster of nodes is ready to be freed.
I believe this may address a bug in the freeing logic as well. For some
reason if the freelist got to a certain size we would call
synchronize_rcu(). I'm assuming that what they meant to do is call
synchronize_rcu() after they had handed off that much memory via
call_rcu(). As such that is what I have updated the behavior to be.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:43 +0000 (10:56 -0800)]
fib_trie: Push assignment of child to parent down into inflate/halve
This change makes it so that the assignment of the tnode to the parent is
handled directly within whatever function is currently handling the node be
it inflate, halve, or resize. By doing this we can avoid some of the need
to set NULL pointers in the tree while we are resizing the subnodes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:37 +0000 (10:56 -0800)]
fib_trie: Add functions should_inflate and should_halve
This change pulls the logic for if we should inflate/halve the nodes out
into separate functions. It also addresses what I believe is a bug where 1
full node is all that is needed to keep a node from ever being halved.
Simple script to reproduce the issue:
modprobe dummy; ifconfig dummy0 up
for i in `seq 0 255`; do ifconfig dummy0:$i 10.0.${i}.1/24 up; done
ifconfig dummy0:256 10.0.255.33/16 up
for i in `seq 0 254`; do ifconfig dummy0:$i down; done
Results from /proc/net/fib_triestat
Before:
Local:
Aver depth: 3.00
Max depth: 4
Leaves: 17
Prefixes: 18
Internal nodes: 11
1: 8 2: 2 10: 1
Pointers: 1048
Null ptrs: 1021
Total size: 11 kB
After:
Local:
Aver depth: 3.41
Max depth: 5
Leaves: 17
Prefixes: 18
Internal nodes: 12
1: 8 2: 3 3: 1
Pointers: 36
Null ptrs: 8
Total size: 3 kB
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:24 +0000 (10:56 -0800)]
fib_trie: Push rcu_read_lock/unlock to callers
This change is to start cleaning up some of the rcu_read_lock/unlock
handling. I realized while reviewing the code there are several spots that
I don't believe are being handled correctly or are masking warnings by
locally calling rcu_read_lock/unlock instead of calling them at the correct
level.
A common example is a call to fib_get_table followed by fib_table_lookup.
The rcu_read_lock/unlock ought to wrap both but there are several spots where
they were not wrapped.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:18 +0000 (10:56 -0800)]
fib_trie: Use unsigned long for anything dealing with a shift by bits
This change makes it so that anything that can be shifted by, or compared
to a value shifted by bits is updated to be an unsigned long. This is
mostly a precaution against an insanely huge address space that somehow
starts coming close to the 2^32 root node size which would require
something like 1.5 billion addresses.
I chose unsigned long instead of unsigned long long since I do not believe
it is possible to allocate a 32 bit tnode on a 32 bit system as the memory
consumed would be 16GB + 28B which exceeds the addressible space for any
one process.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:12 +0000 (10:56 -0800)]
fib_trie: Update meaning of pos to represent unchecked bits
This change moves the pos value to the other side of the "bits" field. By
doing this it actually simplifies a significant amount of code in the trie.
For example when halving a tree we know that the bit lost exists at
oldnode->pos, and if we inflate the tree the new bit being add is at
tn->pos. Previously to find those bits you would have to subtract pos and
bits from the keylength or start with a value of (1 << 31) and then shift
that.
There are a number of spots throughout the code that benefit from this. In
the case of the hot-path searches the main advantage is that we can drop 2
or more operations from the search path as we no longer need to compute the
value for the index to be shifted by and can instead just use the raw pos
value.
In addition the tkey_extract_bits is now defunct and can be replaced by
get_index since the two operations were doing the same thing, but now
get_index does it much more quickly as it is only an xor and shift versus a
pair of shifts and a subtraction.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:06 +0000 (10:56 -0800)]
fib_trie: Optimize fib_table_insert
This patch updates the fib_table_insert function to take advantage of the
changes made to improve the performance of fib_table_lookup. As a result
the code should be smaller and run faster then the original.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:56:00 +0000 (10:56 -0800)]
fib_trie: Optimize fib_find_node
This patch makes use of the same features I made use of for
fib_table_lookup to streamline fib_find_node. The resultant code should be
smaller and run faster than the original.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:55:54 +0000 (10:55 -0800)]
fib_trie: Optimize fib_table_lookup to avoid wasting time on loops/variables
This patch is meant to reduce the complexity of fib_table_lookup by reducing
the number of variables to the bare minimum while still keeping the same if
not improved functionality versus the original.
Most of this change was started off by the desire to rid the function of
chopped_off and current_prefix_length as they actually added very little to
the function since they only applied when computing the cindex. I was able
to replace them mostly with just a check for the prefix match. As long as
the prefix between the key and the node being tested was the same we know
we can search the tnode fully versus just testing cindex 0.
The second portion of the change ended up being a massive reordering.
Originally the calls to check_leaf were up near the start of the loop, and
the backtracing and descending into lower levels of tnodes was later. This
didn't make much sense as the structure of the tree means the leaves are
always the last thing to be tested. As such I reordered things so that we
instead have a loop that will delve into the tree and only exit when we
have either found a leaf or we have exhausted the tree. The advantage of
rearranging things like this is that we can fully inline check_leaf since
there is now only one reference to it in the function.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:55:47 +0000 (10:55 -0800)]
fib_trie: Merge leaf into tnode
This change makes it so that leaf and tnode are the same struct. As a
result there is no need for rt_trie_node anymore since everyting can be
merged into tnode.
On 32b systems this results in the leaf being 4 bytes larger, however I
don't know if that is really an issue as this and an eariler patch that
added bits & pos have increased the size from 20 to 28. If I am not
mistaken slub/slab allocate on power of 2 sizes so 20 was likely being
rounded up to 32 anyway.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:55:41 +0000 (10:55 -0800)]
fib_trie: Merge tnode_free and leaf_free into node_free
Both the leaf and the tnode had an rcu_head in them, but they had them in
slightly different places. Since we now have them in the same spot and
know that any node with bits == 0 is a leaf and the rest are either vmalloc
or kmalloc tnodes depending on the value of bits it makes it easy to combine
the functions and reduce overhead.
In addition I have taken advantage of the rcu_head pointer to go ahead and
put together a simple linked list instead of using the tnode pointer as
this way we can merge either type of structure for freeing.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:55:35 +0000 (10:55 -0800)]
fib_trie: Make leaf and tnode more uniform
This change makes some fundamental changes to the way leaves and tnodes are
constructed. The big differences are:
1. Leaves now populate pos and bits indicating their full key size.
2. Trie nodes now mask out their lower bits to be consistent with the leaf
3. Both structures have been reordered so that rt_trie_node now consisists
of a much larger region including the pos, bits, and rcu portions of
the tnode structure.
On 32b systems this will result in the leaf being 4B larger as the pos and
bits values were added to a hole created by the key as it was only 4B in
length.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 31 Dec 2014 18:55:29 +0000 (10:55 -0800)]
fib_trie: Update usage stats to be percpu instead of global variables
The trie usage stats were currently being shared by all threads that were
calling fib_table_lookup. As a result when multiple threads were
performing lookups simultaneously the trie would begin to cache bounce
between those threads.
In order to prevent this I have updated the usage stats to use a set of
percpu variables. By doing this we should be able to avoid the cache
bouncing and still make use of these stats.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The GRE tap device supports Ethernet over GRE, but doesn't
care about the source address of the tunnel, therefore it
can be changed without bring device down.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Bill Hong [Sat, 27 Dec 2014 18:12:39 +0000 (10:12 -0800)]
l2tp : multicast notification to the registered listeners
Previously l2tp module did not provide any means for the user space to
get notified when tunnels/sessions are added/modified/deleted.
This change contains the following
- create a multicast group for the listeners to register.
- notify the registered listeners when the tunnels/sessions are
created/modified/deleted.
Signed-off-by: Bill Hong <bhong@brocade.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Sven-Thorsten Dietrich <sven@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds generic statistics for enic. As of now dma_map_error is the only
member. dma_map_erro is incremented every time dma maping error happens.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch checks for pci_dma_mapping_error() after dma mapping the data.
If the dma mapping fails we remove the previously queued frags and return
NETDEV_TX_OK.
Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes vnic_wq_buf doubly liked list. This is needed for dma_mapping
error check, in case some frag's dma map fails, we need to move back and remove
previously queued buffers.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Dec 2014 18:06:57 +0000 (13:06 -0500)]
Merge branch 'fec-next'
Fugang Duan says:
====================
net: fec: add Wake-on-LAN support
The patch series enable FEC Wake-on-LAN feature for i.MX6q/dl and i.MX6SX SOCs.
FEC HW support sleep mode, when system in suspend status with FEC all clock gate
off, magic packet can wake up system. For different SOCs, there have special SOC
GPR register to let FEC enter sleep mode or exit sleep mode, add these to platform
callback for driver' call.
Patch#1: add WOL interface supports.
Patch#2: add SOC special sleep of/off operations for driver's sleep callback.
Patch#3: add magic pattern support for devicetree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nimrod Andy [Wed, 24 Dec 2014 09:30:40 +0000 (17:30 +0800)]
ARM: imx: add FEC sleep mode callback function
i.MX6q/dl, i.MX6SX SOCs enet support sleep mode that magic packet can
wake up system in suspend status. For different SOCs, there have some
SOC specifical GPR register to set sleep on/off mode. So add these to
callback function for driver.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nimrod Andy [Wed, 24 Dec 2014 09:30:39 +0000 (17:30 +0800)]
net: fec: add Wake-on-LAN support
Support for Wake-on-LAN using Magic Packet. ENET IP supports sleep mode
in low power status, when system enter suspend status, Magic packet can
wake up system even if all SOC clocks are gate. The patch doing below things:
- flagging the device as a wakeup source for the system, as well as
its Wake-on-LAN interrupt
- prepare the hardware for entering WoL mode
- add standard ethtool WOL interface
- enable the ENET interrupt to wake us
Tested on i.MX6q/dl sabresd, sabreauto boards, i.MX6SX arm2 boards.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Hao [Wed, 24 Dec 2014 06:05:45 +0000 (14:05 +0800)]
net: gianfar: add missing __iomem annotation
Fix the following spare warning:
drivers/net/ethernet/freescale/gianfar.c:3521:60: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:3521:60: expected unsigned int [noderef] <asn:2>*addr
drivers/net/ethernet/freescale/gianfar.c:3521:60: got unsigned int [usertype] *rfbptr
drivers/net/ethernet/freescale/gianfar.c:205:16: warning: incorrect type in assignment (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:205:16: expected unsigned int [usertype] *rfbptr
drivers/net/ethernet/freescale/gianfar.c:205:16: got unsigned int [noderef] <asn:2>*<noident>
drivers/net/ethernet/freescale/gianfar.c:2918:44: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:2918:44: expected unsigned int [noderef] <asn:2>*addr
drivers/net/ethernet/freescale/gianfar.c:2918:44: got unsigned int [usertype] *rfbptr
Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 24 Dec 2014 03:03:52 +0000 (11:03 +0800)]
virtio-net: don't do header check for dodgy gso packets
There's no need to do header check for virtio-net since:
- Host sets dodgy for all gso packets from guest and check the header.
- Host should be prepared for all kinds of evil packets from guest, since
malicious guest can send any kinds of packet.
So this patch sets NETIF_F_GSO_ROBUST for virtio-net to skip the check.
Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
arm: sa1100: move irda header to linux/platform_data
In the end asm/mach/irda.h header is not used by anybody except sa1100.
Move the header to the platform data includes dir and rename it to
irda-sa11x0.h.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Dec 2014 23:30:00 +0000 (18:30 -0500)]
Merge branch 'timecounter'
Richard Cochran says:
====================
Time Counter fixes and improvements
Several PTP Hardware Clock (PHC) drivers implement the clock in
software using the timecounter/cyclecounter code. This series adds one
simple improvement and one more subtle fix to the shared timecounter
facility. Credit for this series goes to Janusz Użycki, who pointed
the issues out to me off list.
Patch #1 simply move the timecounter code into its own file. When
working on this series, it was really annoying to see half the kernel
recompile after every tweak to the timecounter stuff. There is no
reason to keep this together with the clocksource code.
Patch #2 implements an improved adjtime() method, and patches 3-10
convert all of the drivers over to the new method.
Patch #11 fixes a subtle but important issue with the timecounter WRT
frequency adjustment. As it stands now, a timecounter based PHC will
exhibit a variable frequency resolution (and variable time error)
depending on how often the clock is read.
In timecounter_read_delta(), the expression
(delta * cc->mult) >> cc->shift;
can lose resolution from the adjusted value of 'mult'. If the value
of 'delta' is too small, then small changes in 'mult' have no effect.
However, if the delta value is large enough, then small changes in
'mult' will have an effect.
Reading the clock too often means smaller 'delta' values which in turn
will spoil the fine adjustments made to 'mult'. Up until now, this
effect did not show up in my testing. The following example explains
why.
The CPTS has an input clock of 250 MHz, and the clock source uses
mult=0x80000000 and shift=29, making the ticks to nanoseconds
conversion like this:
ticks * 2^31
------------
2^29
Imagine what happens if the clock is read every 10 milliseconds. Ten
milliseconds are about 2500000 ticks, which corresponds to about 21
bits. The product in the numerator has then 52 bits. After the shift
operation, 23 bits are preserved. This results in a frequency
adjustment resolution of about 0.1 ppm (not _too_ bad.)
A frequency resolution of 1 ppm requires 20 bits.
A frequency resolution of 1 ppb requires 30 bits.
For the 250 MHz CPTS clock, reading every 4 seconds yields a 1 ppb
resolution (which is the finest that our API allows).
However, the error can be much higher if the clock is read too often
or if time stamps occur close in time to read operations. In general
it is really not acceptable to allow the rate of clock readings to
influence the clock accuracy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:06 +0000 (19:47 +0100)]
timecounter: keep track of accumulated fractional nanoseconds
The current timecounter implementation will drop a variable amount
of resolution, depending on the magnitude of the time delta. In
other words, reading the clock too often or too close to a time
stamp conversion will introduce errors into the time values. This
patch fixes the issue by introducing a fractional nanosecond field
that accumulates the low order bits.
Reported-by: Janusz Użycki <j.uzycki@elproma.com.pl> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:03 +0000 (19:47 +0100)]
net: ixgbe: convert to timecounter adjtime.
This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:02 +0000 (19:47 +0100)]
net: igb: convert to timecounter adjtime.
This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:01 +0000 (19:47 +0100)]
net: e1000e: convert to timecounter adjtime.
This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:46:57 +0000 (19:46 +0100)]
timecounter: provide a helper function to shift the time.
Some PTP Hardware Clock drivers use a struct timecounter to represent
their clock. To adjust the time by a given offset, these drivers all
perform a two step read/write of their timecounter. However, it is
better and simpler just to adjust the offset in one step. This patch
introduces a little routine to help drivers implement the adjtime
method.
Suggested-by: Janusz Użycki <j.uzycki@elproma.com.pl> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:46:56 +0000 (19:46 +0100)]
time: move the timecounter/cyclecounter code into its own file.
The timecounter code has almost nothing to do with the clocksource
code. Let it live in its own file. This will help isolate the
timecounter users from the clocksource users in the source tree.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix double SKB free in bluetooth 6lowpan layer, from Jukka Rissanen.
2) Fix receive checksum handling in enic driver, from Govindarajulu
Varadarajan.
3) Fix NAPI poll list corruption in virtio_net and caif_virtio, from
Herbert Xu. Also, add code to detect drivers that have this mistake
in the future.
4) Fix doorbell endianness handling in mlx4 driver, from Amir Vadai.
5) Don't clobber IP6CB() before xfrm6_policy_check() is called in TCP
input path,f rom Nicolas Dichtel.
6) Fix MPLS action validation in openvswitch, from Pravin B Shelar.
7) Fix double SKB free in vxlan driver, also from Pravin.
8) When we scrub a packet, which happens when we are switching the
context of the packet (namespace, etc.), we should reset the
secmark. From Thomas Graf.
9) ->ndo_gso_check() needs to do more than return true/false, it also
has to allow the driver to clear netdev feature bits in order for
the caller to be able to proceed properly. From Jesse Gross.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
genetlink: A genl_bind() to an out-of-range multicast group should not WARN().
netlink/genetlink: pass network namespace to bind/unbind
ne2k-pci: Add pci_disable_device in error handling
bonding: change error message to debug message in __bond_release_one()
genetlink: pass multicast bind/unbind to families
netlink: call unbind when releasing socket
netlink: update listeners directly when removing socket
genetlink: pass only network namespace to genl_has_listeners()
netlink: rename netlink_unbind() to netlink_undo_bind()
net: Generalize ndo_gso_check to ndo_features_check
net: incorrect use of init_completion fixup
neigh: remove next ptr from struct neigh_table
net: xilinx: Remove unnecessary temac_property in the driver
net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding
openvswitch: fix odd_ptr_err.cocci warnings
Bluetooth: Fix accepting connections when not using mgmt
Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR
brcmfmac: Do not crash if platform data is not populated
ipw2200: select CFG80211_WEXT
...
Marcel Holtmann [Tue, 30 Dec 2014 04:48:35 +0000 (20:48 -0800)]
Bluetooth: Add support for self testing framework
This add support for the Bluetooth self testing framework that allows
running certain test cases of sample data to ensure correctness of its
basic functionality.
With this patch only the basic framework will be added. It contains
the build magic that allows running this at module loading time or
at late_initcall stage when built into the kernel image.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg [Mon, 29 Dec 2014 10:04:10 +0000 (12:04 +0200)]
Bluetooth: Fix const declarations for smp_f5 and smp_f6
These SMP crypto functions should have all their input parameters
declared as const. This patch fixes the parameters that were missing the
const declaration.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Linus Torvalds [Tue, 30 Dec 2014 05:09:57 +0000 (21:09 -0800)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"A set of three minor cifs fixes"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make new inode cache when file type is different
Fix signed/unsigned pointer warning
Convert MessageID in smb2_hdr to LE
Linus Torvalds [Tue, 30 Dec 2014 04:43:10 +0000 (20:43 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF & isofs fixes from Jan Kara:
"A couple of UDF fixes of handling of corrupted media and one iso9660
fix of the same"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Reduce repeated dereferences
udf: Check component length before reading it
udf: Check path length when reading symlink
udf: Verify symlink size before loading it
udf: Verify i_size when loading inode
isofs: Fix unchecked printing of ER records
Linus Torvalds [Tue, 30 Dec 2014 02:50:02 +0000 (18:50 -0800)]
Merge tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI material from Rafael J Wysocki:
"These are fixes (operating performance points library, cpufreq-dt
driver, cpufreq core, ACPI backlight, cpupower tool), cleanups
(cpuidle), new processor IDs for the RAPL (Running Average Power
Limit) power capping driver, and a modification of the generic power
domains framework allowing modular drivers to call one of its helper
functions.
Specifics:
- Fix for a potential NULL pointer dereference in the cpufreq core
due to an initialization race condition (Ethan Zhao).
- Fixes for abuse of the OPP (Operating Performance Points) API
related to RCU and other minor issues in the OPP library and the
cpufreq-dt driver (Dmitry Torokhov).
- cpuidle governors cleanup making them measure idle duration in a
better way without using the CPUIDLE_FLAG_TIME_INVALID flag which
allows that flag to be dropped from the ACPI cpuidle driver and
from the core too (Len Brown).
- New ACPI backlight blacklist entries for Samsung machines without a
working native backlight interface that need to use the ACPI
backlight instead (Aaron Lu).
- New CPU IDs of future Intel Xeon CPUs for the Intel RAPL power
capping driver (Jacob Pan).
- Generic power domains framework modification to export the
of_genpd_get_from_provider() function to modular drivers that will
allow future driver modifications to be based on the mainline (Amit
Daniel Kachhap).
- Two fixes for the cpupower tool (Michal Privoznik, Prarit
Bhargava)"
* tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Add some Samsung models to disable_native_backlight list
tools / cpupower: Fix no idle state information return value
tools / cpupower: Correctly detect if running as root
cpufreq: fix a NULL pointer dereference in __cpufreq_governor()
cpufreq-dt: defer probing if OPP table is not ready
PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
PM / OPP: fix warning in of_free_opp_table()
PM / OPP: add some lockdep annotations
powercap / RAPL: add IDs for future Xeon CPUs
PM / Domains: Export of_genpd_get_from_provider function
cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID
cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
Linus Torvalds [Mon, 29 Dec 2014 21:30:50 +0000 (13:30 -0800)]
Merge tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, the DMA burst size increase in the
spfi driver is a fix to make the hardware happier in some situations"
* tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: img-spfi: Increase DMA burst size
spi: img-spfi: Enable controller before starting TX DMA
spi: sh-msiof: Add runtime PM lock in initializing
Linus Torvalds [Mon, 29 Dec 2014 21:24:38 +0000 (13:24 -0800)]
Merge tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull one regulator fix from Mark Brown:
"One fix here, a fix for the voltage mapping on one of the s2mps11
regulators which broke systems using it including apparently the
Gear 2 smartwatches"
* tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mps11: Fix dw_mmc failure on Gear 2
Linus Torvalds [Mon, 29 Dec 2014 21:13:41 +0000 (13:13 -0800)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
"First of all, the most important change is the thermal cpu cooling
fixes. The major fix here is to have proper sequencing between
cpufreq layer and thermal cpu cooling registration. A take away of
this fix is an improvement in the thermal drivers code. Thermal
drivers that require cpu cooling do not need to check for cpufreq
layer. The requirement now is to propagate the error code, if any,
while registering cpu cooling device. Thanks to Viresh for
implementing the required CPUfreq changes.
Second, a new driver is introduced for int340x processor thermal
device. Given that int340x thermal is disabled by default, and this
processor thermal device is only available on limited platforms, plus
the driver does nothing but exposes some thermal limitation
information for user space to use, thus I think it is safe to include
it in this pull request after missing 3.19-rc2.
- several small fixes and cleanups for int340x thermal drivers"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (43 commits)
Thermal/int340x/int3403: Free acpi notification handler
Thermal/int340x/processor_thermal: Fix memory leak
Thermal/int340x/int3403: Fix memory leak
thermal: int340x: Introduce processor reporting device
thermal: int340x_thermal: drop owner assignment from platform_drivers
thermal: drop owner assignment from platform_drivers
thermal: cpu_cooling: document node in struct cpufreq_cooling_device
thermal/powerclamp: add ids for future xeon cpus
Thermal/int340x: Handle properly the case when _trt or _art acpi entry is missing
thermal: cpu_cooling: return ERR_PTR() for !CPU_THERMAL or !THERMAL_OF
thermal: cpu_cooling: small memory leak on error
thermal: ti-soc-thermal: Do not print error message in the EPROBE_DEFER case
thermal: db8500: Do not print error message in the EPROBE_DEFER case
thermal: imx: Do not print error message in the EPROBE_DEFER case
thermal: Fix cdev registration with THERMAL_NO_LIMIT on 64bit
drivers: thermal: Remove ARCH_HAS_BANDGAP dependency for samsung
thermal:core:fix: Check return code of the ->get_max_state() callback
thermal: cpu_cooling: update copyright tags
thermal: cpu_cooling: Use cpufreq_dev->freq_table for finding level/freq
thermal: cpu_cooling: Store frequencies in descending order
...
Michal Hocko [Mon, 29 Dec 2014 19:30:35 +0000 (20:30 +0100)]
mm: get rid of radix tree gfp mask for pagecache_get_page
Commit 2457aec63745 ("mm: non-atomically mark page accessed during page
cache allocation where possible") has added a separate parameter for
specifying gfp mask for radix tree allocations.
Not only this is less than optimal from the API point of view because it
is error prone, it is also buggy currently because
grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if
fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by
AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then
the radix tree allocation wouldn't obey the restriction and might
recurse into filesystem and cause deadlocks. This is the case for most
filesystems unfortunately because only ext4 and gfs2 are using
AOP_FLAG_NOFS.
Let's simply remove radix_gfp_mask parameter because the allocation
context is same for both page cache and for the radix tree. Just make
sure that the radix tree gets only the sane subset of the mask (e.g. do
not pass __GFP_WRITE).
Long term it is more preferable to convert remaining users of
AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this
interface even further.
Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmc: core: stop trying to switch width when only one bit is supported
mmc_select_bus_width() will try to switch to MMC_BUS_WIDTH_4 even if
MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA are not set in host->caps.
Return as soon as possible when those flags are not set
projects / linux-beck.git / log