Fugang Duan [Wed, 8 Feb 2012 03:26:58 +0000 (11:26 +0800)]
ENGR00172274-01 - [MX6]: rework IEEE-1588 ts_clk in MX6Q ARIK CPU board.
- Fix GPIO_16 IOMUX config.
- Config GPIO_16 pad to ENET_ANATOP_ETHERNET_REF_OUT.
- IEEE-1588 ts_clk, S/PDIF in and i2c3 are mutually exclusive,
because all of them use GPIO_16, so it only for one function
work at a moment.
- Test result:
Enet work fine at 100/1000Mbps in TO1.1.
IEEE 1588 timestamp is convergent.
Jason Liu [Tue, 7 Feb 2012 06:00:21 +0000 (14:00 +0800)]
ENGR00173869-3: i.mx6: add the cpu_is_mx6dl() support
In order to support one image for i.mx6q and i.mx6dl, we introduce
the below functions by diff the value reading from ANATOP ID register.
cpu_is_mx6q() and cpu_is_mx6dl()
The layout for the register defines:
Major Minor
i.MX6Q1.1: 6300 01
i.MX6Q1.0: 6300 00
i.MX6DL1.0: 6100 00
For the common bits shared across all i.mx6 ports, we can use:
cpu_is_mx6() for it.
Huang Shijie [Wed, 18 Jan 2012 02:51:40 +0000 (10:51 +0800)]
ENGR00173731-3 mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()
[1] Background :
The GPMI does ECC read page operation with a DMA chain consist of three DMA
Command Structures. The middle one of the chain is used to enable the BCH,
and read out the NAND page.
The WAIT4END(wait for command end) is a comunication signal between
the GPMI and MXS-DMA.
[2] The current DMA code sets the WAIT4END bit at the last one, such as:
[3] But in the new GPMI version (used in MX50/MX60), the WAIT4END bit should
be set not only at the last DMA Command Structure,
but also at the middle one, such as:
+-----+ +-----+ +-----+
| cmd | ------------> | cmd | ------------------> | cmd |
+-----+ +-----+ +-----+
^ ^
| |
| |
set WAIT4END here too set WAIT4END here
If we do not set WAIT4END, the BCH maybe stalls in "ECC reading page" state.
In the next ECC write page operation, a DMA-timeout occurs.
This has been catched in the MX6Q board.
[4] In order to fix the bug, rewrite the last parameter of
mxs_dma_prep_slave_sg(), and use the dma_ctrl_flags:
---------------------------------------------------------
DMA_PREP_INTERRUPT : append a new DMA Command Structrue.
DMA_CTRL_ACK : set the WAIT4END bit for this DMA Command Structure.
---------------------------------------------------------
[5] changes to the relative drivers:
For gpmi-nand driver: use the new flags.
Huang Shijie [Mon, 6 Feb 2012 02:47:02 +0000 (10:47 +0800)]
ENGR00173731-1 mxs-dma : rename the dma.h for mxs-dma
Move the header to a more common place.
The mxs dma engine is not only used in mx23/mx28, but also used
in mx50/mx6q. It will also be used in the future chips.
Ryan QIAN [Tue, 31 Jan 2012 03:01:52 +0000 (11:01 +0800)]
ENGR00173288-02 merge "[MX6Q]add SDHC3.0 support on uSDHC controller"
ENGR152547-03 [MX6Q]add SDHC3.0 support on uSDHC controller
add voltage switch function due to SDHC3.0 spec requirement
add tuning function due to SDHC3.0 spec requirement
extend some functions to support SDR50 & SDR104 speed mode
- adjust the sequence of current_limit and bus_speed_mode
- add FSL specific tuning procedure
Ryan QIAN [Tue, 31 Jan 2012 02:58:38 +0000 (10:58 +0800)]
ENGR00173288-01 merge "[MX6Q]add SDHC3.0 support on uSDHC controller"
ENGR152547-03 [MX6Q]add SDHC3.0 support on uSDHC controller
add voltage switch function due to SDHC3.0 spec requirement
add tuning function due to SDHC3.0 spec requirement
extend some functions to support SDR50 & SDR104 speed mode
- add support for SD3.0.
- add workaround for accessing non-exist registers on FSL SDHC.
Peter Chen [Fri, 3 Feb 2012 06:31:35 +0000 (14:31 +0800)]
ENGR00173639 mx6q: clock: PLL3's power can be off at runtime at TO1.1
It is the fix for Design PDM TKT064178, IC has already verified it,
and no more power consumption for setting/clear this bit.
With this bit, the power of pll3 can be off even the power bit for pll3
is on. In order to support USB wakeup, the power bit for pll3 should
be always on, and the power of pll3 is controller by USB hardware and
this new added bit at runtime.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
ENGR00173586-2 [MX6] Add support to source GPT from 24MHz
On MX6Q TO1.1, MX6DL/S and MX6Solo, GPT can be sourced
from a constant source (better for frequency scaling).
Currently we set the GPT clock to 3MHz (24MHz div by 8).
ENGR00173586-1 [MX6] Add support to source GPT from 24MHz
On MX6Q TO1.1, MX6DL/S and MX6Solo, GPT can be sourced
from a constant source (better for frequency scaling).
Currently we set the GPT clock to 3MHz (24MHz div by 8).
Alan Tull [Thu, 26 Jan 2012 10:37:10 +0000 (04:37 -0600)]
ENGR00171536 HDMI handle mmapped audio buffers
The ALSA userspace requires mmapped buffer access to support sample
rate conversion.
Our hardware requires the driver to add frame information to the pcm
data. For non-mmap access, the snd_pcm_ops' copy routine will do it.
For mmap access, we have to do it in the isr. This is not ideal, but
it will work.
Anson Huang [Thu, 2 Feb 2012 10:05:40 +0000 (18:05 +0800)]
ENGR00173645 [MX6]Implement low power actions into DSM
1. Need to follow right programming model for wb_per_at_lpm
,zeroed wb_count each time exit from DSM and set it before
entering DSM;
2. For TO1.1, need to set fet_odrive for better power gate.
Anson Huang [Thu, 19 Jan 2012 09:07:02 +0000 (17:07 +0800)]
ENGR00172391 [MX6]Remove unnecessary workaround of wdog for TO1.1
On TO1.1, there is no such issue now, so remove the workaround,
as this is a very very low possibility to reproduce this issue, and the
workaround has very complicated logic, it is hard and non-necessary
to add SOC version check, so just remove it.
ENGR00173585: MX6: Added WAIT mode workaround for MX6Q TO1.1
There is small window where an interrupt can occur when the SOC is
in the process of entering WAIT mode. The ARM core responds to this
interrupt and can access the internal memories when their clocks are
disabled.
To avoid crashes generated due to this, WFI code should be executed
from non-cacheable IRAM and enough delay should added after the
WFI so that accesses to memories are prevented.
This workaround assumes that all interrupts are routed to CPU0 only.
This workaround is applicable to iMX6DL/Solo also.
Peter Chen [Tue, 31 Jan 2012 05:34:20 +0000 (13:34 +0800)]
ENGR00173378-1 usb: device: Change judgement condition for resume occurrence
At former code, it uses portsc.fpr to indicate if the host sends
resume signal to device, but it has some limitations that if the code
can't be executed before the resume signal finishes, the portsc.fpr
will be cleared automatically.
Now, it uses usbsts.pci to judge host resume signal, this bit
will not be cleared before the non-wakeup interrupt handler is called,
and the wakeup code is executed before non-wakeup interrupt handler.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Encapsulate last MTD partition parser argument into a separate
structure. Currently it holds only 'origin' field for RedBoot parser,
but will be extended in future to contain at least device_node for OF
devices.
Lots (nearly all) mtd drivers contain nearly the similar code that
calls parse_mtd_partitions, provides some platform-default values, if
parsing fails, and registers mtd device.
This is an aim to provide single implementation of this scenario:
mtd_device_parse_register() which will handle all this parsing and
defaults.
Richard Zhao [Tue, 15 Nov 2011 06:47:56 +0000 (14:47 +0800)]
clk: add helper functions clk_prepare_enable and clk_disable_unprepare
It's for migrating to generic clk framework API.
The helper functions help cases clk_enable/clk_disable is used
in non-atomic context.
For example, Call clk_enable in probe and clk_disable in remove.
Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Marek Vasut <marek.vasut@gmail.com>
Russell King [Thu, 22 Sep 2011 10:30:50 +0000 (11:30 +0100)]
clk: provide prepare/unprepare functions
As discussed previously, there's the need on some platforms to run some
parts of clk_enable() in contexts which can schedule. The solution
which was agreed upon was to provide clk_prepare() and clk_unprepare()
to contain this parts, while clk_enable() and clk_disable() perform
the atomic part.
This patch provides a common definition for clk_prepare() and
clk_unprepare() in linux/clk.h, and provides an upgrade path for
existing implementation and drivers: drivers can start using
clk_prepare() and clk_unprepare() once this patch is merged without
having to wait for platform support. Platforms can then start to
provide these additional functions.
Eventually, HAVE_CLK_PREPARE will be removed from the kernel, and
everyone will have to provide these new APIs.
Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Lothar Waßmann [Thu, 8 Dec 2011 08:15:44 +0000 (09:15 +0100)]
dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
This is how the original Freescale code (unintentionally) worked,
because the code path which would have asserted the CLKGATE bit was
never actually reached in their code.
This fixes the nefarious "DMA timout" bug when multiple DMA channels
(e.g. GPMI NAND and MMC) are used at the same time.
If a better fix for this problem should be found, the clkgate handling
could be reinstated.
See http://lists.infradead.org/pipermail/linux-arm-kernel/2011-September/065228.html
Also reverse the order of mxs_dma_disable_chan() and
mxs_dma_reset_chan() in mxs_dma_control() because mxs_dma_reset_chan()
can only work when the DMA channel is enabled.
Lothar Waßmann [Thu, 8 Dec 2011 08:15:42 +0000 (09:15 +0100)]
dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
There is no need to have the clock enabled all the time the driver is
loaded.
It will be enabled anyway in mxs_dma_alloc_chan_resources() when a
channel is actually going to be used.
Other files using dma.h may fail to compile as follows:
In file included from sound/soc/mxs/mxs-pcm.h:22,
from sound/soc/mxs/mxs-saif.h:112,
from sound/soc/mxs/mxs-sgtl5000.c:34:
arch/arm/mach-mxs/include/mach/dma.h:16: warning: 'struct dma_chan' declared inside parameter list
arch/arm/mach-mxs/include/mach/dma.h:16: warning: its scope is only this definition or declaration, which is probably not what you want
arch/arm/mach-mxs/include/mach/dma.h: In function 'mxs_dma_is_apbh':
arch/arm/mach-mxs/include/mach/dma.h:18: error: dereferencing pointer to incomplete type
arch/arm/mach-mxs/include/mach/dma.h: At top level:
arch/arm/mach-mxs/include/mach/dma.h:21: warning: 'struct dma_chan' declared inside parameter list
arch/arm/mach-mxs/include/mach/dma.h: In function 'mxs_dma_is_apbx':
arch/arm/mach-mxs/include/mach/dma.h:23: error: dereferencing pointer to incomplete type
make[3]: *** [sound/soc/mxs/mxs-sgtl5000.o] Error 1
make[2]: *** [sound/soc/mxs] Error 2
make[1]: *** [sound/soc] Error 2
make: *** [sound] Error 2
It seems it's better for dma.h to include dmaengine.h himself.
Shawn Guo [Tue, 13 Dec 2011 15:48:03 +0000 (23:48 +0800)]
dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
Before dma_transfer_direction was introduced to replace
dma_data_direction, some dmaengine device uses DMA_NONE of
dma_data_direction for some talk with its client drivers.
The mxs-dma and its clients mxs-mmc and gpmi-nand are such case.
This patch adds DMA_TRANS_NONE to dma_transfer_direction and
migrate the DMA_NONE use in mxs-dma to it.
It also fixes the compile warning below.
CC drivers/dma/mxs-dma.o
drivers/dma/mxs-dma.c: In function ‘mxs_dma_prep_slave_sg’:
drivers/dma/mxs-dma.c:420:16: warning: comparison between ‘enum dma_transfer_direction’ and ‘enum dma_data_direction’
Paul Gortmaker [Fri, 29 Jul 2011 06:55:11 +0000 (16:55 +1000)]
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
The implicit presence of module.h and all its sub-includes was
masking these implicit header usages:
include/linux/dmaengine.h:684: warning: 'struct page' declared inside parameter list
include/linux/dmaengine.h:684: warning: its scope is only this definition or declaration, which is probably not what you want
include/linux/dmaengine.h:687: warning: 'struct page' declared inside parameter list
include/linux/dmaengine.h:736:2: error: implicit declaration of function 'bitmap_zero'
With input from Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Vinod Koul [Thu, 13 Oct 2011 09:45:27 +0000 (15:15 +0530)]
dmaengine: add new enum dma_transfer_direction
This new enum removes usage of dma_data_direction for dma direction. The new
enum cleans tells the DMA direction and mode
This further paves way for merging the dmaengine _prep operations and also for
interleaved dma
Suggested-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
For clients which require a single slave transfer and dont want to be bothered
about the scatterlist api, this helper gives simple API for this transfer and
creates single scatterlist for DMA API
To prevent mm.h inclusion via other channels also extract "enum dma_data_direction"
definition into separate header. This tiny piece is what gluing netdevice.h with mm.h
via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h".
Removal of mm.h from scatterlist.h was tried and was found not feasible
on most archs, so the link was cutoff earlier.
Hope people are OK with tiny include file.
Note, that mm_types.h is still dragged in, but it is a separate story.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huang Shijie [Wed, 4 Jan 2012 03:18:46 +0000 (11:18 +0800)]
mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23
In MX28, if we do not reset the BCH module. The BCH module may
becomes unstable when the board reboots for several thousands times.
This bug has been catched in customer's production.
The patch adds some comments(some from Wolfram Sang), and fixes it now.
Wolfram Sang [Wed, 23 Nov 2011 14:57:06 +0000 (15:57 +0100)]
mtd: gpmi: add missing include 'module.h'
Fixes:
drivers/mtd/nand/gpmi-nand/gpmi-nand.c: In function 'gpmi_nfc_init':
drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1475:16: error: 'THIS_MODULE' undeclared (first use in this function)
drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1475:16: note: each undeclared identifier is reported only once for each function it appears in
drivers/mtd/nand/gpmi-nand/gpmi-nand.c: At top level:
drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:15: error: expected declaration specifiers or '...' before string constant
drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:1: warning: data definition has no type or storage class
drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
and some more...
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Read esd_csd info each time when cat boot_info
becasue user may change config affect esd_csd
value.
boot_info:0x07;
ALT_BOOT_MODE:1 - Supports alternate boot method
DDR_BOOT_MODE:1 - Supports alternate dual data rate during boot
HS_BOOTMODE:1 - Supports high speed timing during boot
boot_size:0512KB
boot_partition:0x48;
BOOT_ACK:1 - Boot acknowledge sent during boot operation
BOOT_PARTITION-ENABLE: 1 - Boot partition 1 enabled
PARTITION_ACCESS:0 - No access to boot partition
boot_bus:0x01
BOOT_MODE:0 - Use single data rate + backward compatible timings
in boot operation
RESET_BOOT_BUS_WIDTH:0 - Reset bus width to x1, single data rate
and backward compatible timings after boot operation
BOOT_BUS_WIDTH:1 - x4 (sdr/ddr) bus width in boot operation mode
Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Ryan QIAN <b32804@freescale.com>
Enable the configurations of the boot enable on the eMMC cards.
Add the interface that used to configure the boot_bus_width
In order to make sure that the re-read the ext-csd of card
can be completed successfully, add the method to wait for
the finish of the busy state.
NOTE:
The following are the valid inputs when configure the boot
bus width of the eMMC cards.
+--------------------------------------------------------------------+
| Bit7 Bit6 Bit5 | Bit4 Bit3 | Bit2 | Bit1 Bit0 |
|----------------|----------------------------------|----------------|
| X | BOOT_MODE | RESET_BOOT_BUS_WIDTH | BOOT_BUS_WIDTH |
+--------------------------------------------------------------------+
Bit [4:3] : BOOT_MODE (non-volatile)
0x0 : Use single data rate + backward compatible timings in boot
operation (default)
0x1 : Use single data rate + high speed timings in boot operation mode
0x2 : Use dual data rate in boot operation
0x3 : Reserved
Bit [2]: RESET_BOOT_BUS_WIDTH (non-volatile)
0x0 : Reset bus width to x1, single data rate and backward compatible
timings after boot operation (default)
0x1 : Retain boot bus width and boot mode after boot operation
Bit[1:0] : BOOT_BUS_WIDTH (non-volatile)
0x0 : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
0x1 : x4 (sdr/ddr) bus width in boot operation mode
0x2 : x8 (sdr/ddr) bus width in boot operation mode
0x3 : Reserved
The following are the valid inputs when configure the boot
partitions of the eMMC cards.
+------------------------------------------------------------+
| Bit7 | Bit6 | Bit5 Bit4 Bit3 | Bit2 Bit1 Bit0 |
|------|----------|-----------------------|------------------|
| X | BOOT_ACK | BOOT_PARTITION_ENABLE | PARTITION_ACCESS |
+------------------------------------------------------------+
Bit7: Reserved
Bit6: always set to vaule '1' when boot_part is enabled
Bit[5:3]:
0x0 : Device not boot enabled (default)
0x1 : Boot partition 1 enabled for boot
0x2 : Boot partition 2 enabled for boot
0x7 : User area enabled for boot
Bit[2:0]:
0x0 : No access to boot partition (default)
0x1 : R/W boot partition 1
0x2 : R/W boot partition 2
So only the '0, 1, 2; 8, 9, 10; 16, 17, 18; 56, 57, 58' are
valid parameters when configure the boot_partiton.
Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Ryan QIAN <b32804@freescale.com>
Ryan QIAN [Sat, 7 Jan 2012 04:20:28 +0000 (12:20 +0800)]
ENGR00173283 merge "eMMC: Boot Partition switch func used in MFG tool"
ENGR125411 eMMC: Boot Partition switch func used in MFG tool
User can get eMMC partitions info from user space layer in
linux OS enviroment.
User can do switch operations between the eMMC boot partitions
and the user partition.
User can access the eMMC boot partitions from user space layer
in linux OS enviroment.
NOTE:This func had been verified on TOSHIBA eMMC44 card only.
Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Rob Herring <r.herring@freescale.com> Signed-off-by: Ryan QIAN <b32804@freescale.com>
Huang Shijie [Tue, 13 Dec 2011 15:48:05 +0000 (23:48 +0800)]
mtd: fix compile error for gpmi-nand
The driver gpmi-nand should compile at least. This patch adds the
missing gpmi-nand.h to fix the compile error below.
CC drivers/mtd/nand/gpmi-nand/gpmi-nand.o
CC drivers/mtd/nand/gpmi-nand/gpmi-lib.o
drivers/mtd/nand/gpmi-nand/gpmi-nand.c:25:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory
drivers/mtd/nand/gpmi-nand/gpmi-lib.c:21:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory
This header is grabbed from patch below, which has not been postponed
for merging.
[PATCH v8 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28
http://permalink.gmane.org/gmane.linux.drivers.mtd/37338
Adrian Alonso [Wed, 18 Jan 2012 20:56:32 +0000 (14:56 -0600)]
ENGR00172362 mx6q-ard cleanup i2c board settings
* Clean i2c board settings for sabreauto platform
* Remove and unregister i2c0 device not used in this board
* Move i2c3 pads to general mx6q_sabreauto_pads[]
* [v2] add camera module ov3640 module to i2c2 bus
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Danny Nold [Thu, 19 Jan 2012 20:56:33 +0000 (14:56 -0600)]
ENGR00172360-2 - MXC HDMI: New TO1.1 PLL5/PLL4 dividers not set up in clock code
Due to the use of some higher frequencies for HDMI video modes, the
IPU clock set/get/round functions need to use 64-bit variables
for clock calculations instead of 32-bit variables.
Signed-off-by: Danny Nold <dannynold@freescale.com>
Danny Nold [Thu, 19 Jan 2012 20:53:51 +0000 (14:53 -0600)]
ENGR00172360-1 - MXC HDMI: New TO1.1 PLL5/PLL4 dividers not set up in clock co
Update get_rate, set_rate, and round_rate for audio_video PLLs
to account for new dividers added for MX6Q TO1.1. Since default value
for one of these dividers is 4, this is important for function of clocks
derived from PLL4 and PLL5.
Signed-off-by: Danny Nold <dannynold@freescale.com>
For cards that have two or more DAIs, snd_soc_resume's loop over all
DAIs ends up calling schedule_work(deferred_resume_work) once per DAI.
Since this is the same work item each time, the 2nd and subsequent
calls return 0 (work item already queued), and trigger the dev_err
message below stating that a work item may have been lost.
Solve this by adjusting the loop to simply calculate whether to run the
resume work immediately or defer it, and then call schedule work (or not)
one time based on that.
Note: This has not been tested in mainline, but only in chromeos-2.6.38;
mainline doesn't support suspend/resume on Tegra, nor does the mainline
Tegra ASoC driver contain multiple DAIs. It has been compile-checked in
mainline.
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
changed the defaut behaviour for non-ac97 class which cause deferred_resume_work
was scheduled not by desire when card->num_rdt is zero.
Jason Liu [Mon, 9 Jan 2012 07:58:11 +0000 (15:58 +0800)]
ENGR00172374-6: fix the mlb modules build errors
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c: In function 'mlb_tx_isr':
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c:1351: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function)
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c:1351: error: (Each undeclared identifier is reported only once
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c:1351: error: for each function it appears in.)
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c: In function 'mlb_rx_isr':
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c:1400: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function)
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c: In function 'mxc_mlb150_read':
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c:1828: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function)
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c:1828: error: implicit declaration of function 'signal_pending'
/home/r64343/work_space/linux-2.6/drivers/mxc/mlb/mxc_mlb150.c:1828: error: implicit declaration of function 'schedule'
missing one header file: sched.h, add it to fix it.
Currently, the gic uses handle_level_irq for handling SPIs (Shared
Peripheral Interrupts), requiring active interrupts to be masked at
the distributor level during IRQ handling.
On a virtualised system, only the CPU interfaces are virtualised in
hardware. Accesses to the distributor must be trapped by the
hypervisor, adding latency to the critical interrupt path in Linux.
This patch modifies the GIC code to use handle_fasteoi_irq for handling
interrupts, which only requires us to signal EOI to the CPU interface
when handling is complete. Cascaded IRQ handling is also updated to use
the chained IRQ enter/exit functions to honour the flow control of the
parent chip.
Note that commit 846afbd1 ("GIC: Dont disable INT in ack callback")
broke cascading interrupts by forgetting to add IRQ masking. This is
no longer an issue because the unmask call is now unnecessary.
Tested on Versatile Express and Realview EB (1176 w/ cascaded GICs).
Tested-and-reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Tested-and-acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
the above commit has removed the irq_ack from gic chip tus the following call:
desc->irq_data.chip->irq_ack(&desc->irq_data);
will trow the kernel oops, to fix it, just involve the pair to fix it.
Jason Liu [Mon, 9 Jan 2012 05:11:57 +0000 (13:11 +0800)]
ENGR00172374-4: remove platform _adjust_dma_zone function
fix the compiling warnings when upgrade to v3.0
arch/arm/mm/init.c:215: warning: 'arm_adjust_dma_zone' defined but not used
The commit: be20902 ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizes by
Russell has make the _adjust_dma_zone function the common help function, thus
we can remove platform _adjust_dma_zone function by just define:ARM_DMA_ZONE_SIZE
ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizes
Rather than each platform providing its own function to adjust the
zone sizes, use the new ARM_DMA_ZONE_SIZE definition to perform this
adjustment. This ensures that the actual DMA zone size and the
ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS definitions are consistent with
each other, and moves this complexity out of the platform code.
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jason Liu <r64343@freescale.com>
Jason Liu [Thu, 19 Jan 2012 06:04:43 +0000 (14:04 +0800)]
ENGR00172374-3: flexcan: use irq_set_irq_wake
fix the building errors when upgrade to v3.0
The following commit change the function name:
commit a0cd9ca2b907d7ee26575e7b63ac92dad768a75e
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Thu Feb 10 11:36:33 2011 +0100
genirq: Namespace cleanup
The irq namespace has become quite convoluted. My bad. Clean it up
and deprecate the old functions. All new functions follow the scheme:
irq number based:
irq_set/get/xxx/_xxx(unsigned int irq, ...)
Now that we have a way to pass MFD cells down to the sub drivers,
we can gradually get rid of mfd_data by putting the platform pointer
back in place.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
But the above commit also change the name from data_size to pdata_size,
This patch just give one fix for the pfuze driver to use pdata_size field.
Jason Liu [Tue, 17 Jan 2012 11:00:30 +0000 (19:00 +0800)]
ENGR00172222:imx6_defconfig: enable ARM errata software workaround 764369
We need enable the following ARM errata software workaround:
CONFIG_ARM_ERRATA_764369=y
This errata is TKT078684 in i.MX6Q errata list.
In order to enable this errata, we need cherry-pick the following commit:
ARM: 7091/1: errata: D-cache line maintenance operation by MVA may not succeed: f64f6df4241093ea928b0a263ec53b93b65efc08
In order to apply the above patch successfully and keep the git history, we also
need cherry-pick the following commit:
projects / karo-tx-linux.git / log