staging: lustre: plain interger was used as NULL pointer
This patch fixes the following warnings found when running sparse:
.../lproc_echo.c:43:11: warning: Using plain integer as NULL pointer
.../lproc_echo.c:49:11: warning: Using plain integer as NULL pointer
Benjamin Romer [Thu, 17 Jul 2014 16:39:58 +0000 (12:39 -0400)]
staging: unisys: detect controlvm channel on module load
The controlvm channel is not removable from a guest after the guest starts,
so it makes no sense to constantly check for it. Move the channel address
discovery to visorchipset_init(), and remove all of the checks for the channel
address from the rest of the module, as the module will not load if the
channel pointer is not valid.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Thu, 17 Jul 2014 16:39:57 +0000 (12:39 -0400)]
staging: unisys: simplify controlvm channel address function
There is no reason to have controlvm_get_channel_address() defined in a
separate file. Move it to visorchipset_main.c, remove the no-op functions
controlvm_init() and controlvm_deinit() from visorchipset_main.c, and remove
the controlvm.h and controlvm_direct.c files from the module.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Thu, 17 Jul 2014 03:03:09 +0000 (22:03 -0500)]
staging: rtl8192ee: Fix setting highest n rate
Commit 4fb6a37c3f94c1cb4b828bfcc4347771e1628f88 by Andrey Utkin
<andrey.krieger.utkin@gmail.com> and entitled "staging: rtl8192ee:
"Correct bitmask in comparsion" fixed what appeared to be a typo. After
consultation with the Realtek engineers, merely testing for a 2T2R device
is sufficient to ensure that the TX MCS map will equal 0x0c, thus the second
test can be ignored.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a number of pr_{level} messages in this file that are used
to print kernel messages when the device pointer is not available for
a dev_{level} message.
Use pr_fmt() to ensure all of these messages have the module prefix.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc: tidy up labpc_ai_scan_mode()
This function checks the cmd->chanlist to determine the scan mode
used to sample the analog inputs. All possible modes are checked
so the final pr_err() and return 0 can never be reached.
Tidy up the function a bit and remove the unreachable code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character.
All of the users of this function have been converted to use dev_err()
directly. Remove the now unused function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci1500: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci1564: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci3120: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3501: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci9118: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adv_pci1724: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adv_pci_dio: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_dio_common: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_pci230: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: comedi_test: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das08: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16m1: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dmm32at: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt2814: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: icp_multi: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas64: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_660x: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_at_a2150: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_mio_common: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_pcidio: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl711: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl816: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: s626: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value saved in RegBcnCtrlVal was never used. In addition the code
was highly endian broken, declaring it as a u32, then accessing it via
a u8 * later.
According to Documentation/CodingStyle, when one branch of an if-else
statement has multiple statements, both branches should be enclosed in curly
brackets.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: remove 'volatile' from private data
As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / karo-tx-linux.git / log