Leo Kim [Fri, 1 Apr 2016 08:44:19 +0000 (17:44 +0900)]
staging: wilc1000: adds a check routine when performed del_key()
This patch is adds a check routine when performed del_key().
We was find this situation while test the 'rmmod sdio'.
That is received inform a .del_key cmd from cfg80211.
If is not exist wep keys, must be ignore a wilc_remove_wep_key() function.
Thus, adds a check routine that key length of wep.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Fri, 1 Apr 2016 08:44:18 +0000 (17:44 +0900)]
staging: wilc1000: adds a cfg80211_disconnected() function
This patch is adds a cfg80211_disconnected() when connection is lost already.
We was find this situation while test the 'rmmod sdio'.
SDIO remove function are include both remove mac_close and unregister net_device.
That is received one more a disconnect cmd from cfg80211.
Driver was already performed disconnect.
If wilc->close value was set to true, adds a call to cfg80211_disconnected().
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Fri, 1 Apr 2016 08:44:15 +0000 (17:44 +0900)]
staging: wilc1000: txq_thread_started: replaces a semaphore with a completion
This patch replaces a semaphore(txq_thread_started) with a completion.
Struct semaphore txq_thread_started is used to signal completion of txq thread.
It is better to use completion than semaphore for this case.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Fri, 1 Apr 2016 08:44:13 +0000 (17:44 +0900)]
staging: wilc1000: changes logic when happened mq_send fail
This patch changes logic when happened mq_send fail.
The check as a result value that mq_send fail.
But, regardless of the result value then perform a semaphore up.
That is an occur that semaphore locking.
Add to 'else' routine and move to 'else' position a semaphore up.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Thu, 28 Apr 2016 16:07:38 +0000 (12:07 -0400)]
staging: lustre: llite: quiet overly verbose info message
The client doesn't need to print a message for every client mount that
the layout lock feature is enabled. This can be found at runtime via
the "import" proc file.
I also noticed that deleting OST objects logs into the debug log with
D_HA status, which is enabled by default. Move this over to D_INODE
so it doesn't fill the OST debug logs.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1095
Reviewed-on: http://review.whamcloud.com/7918 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Emoly Liu <emoly.liu@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emoly Liu [Thu, 28 Apr 2016 16:07:37 +0000 (12:07 -0400)]
staging: lustre: debugfs: improve osc/mdc "imports" connect data
Improve /sys/debug/fs/lustre/{osc,mdc}/*/import files to print
the struct obd_connect_data data fields as "connect_data:"
in addition to the "connect_flags:" field.
Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3386
Reviewed-on: http://review.whamcloud.com/6588 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emoly Liu [Thu, 28 Apr 2016 16:07:36 +0000 (12:07 -0400)]
staging: lustre: obd: add case LCFG_PARAM to osd_process_config
Some proc parameters were moved from ofd to osd module and only
their symlinks were kept in ofd for interoperability/compatibility.
To process this kind of config params passed by ofd, this patch is
to do the following fixes:
- since these parameters are not included by the static lprocfs var
list, a pre-check is added for them to avoid "unknown param" error
message confuses the uses. If they are matched in this check, they
will be passed to the osd directly.
- improve the error messages in class_process_proc_param() and
class_process_proc_seq_param() a little.
Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4221
Reviewed-on: http://review.whamcloud.com/8238 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 28 Apr 2016 16:07:34 +0000 (12:07 -0400)]
staging: lustre: fld: add local fldb to each target
Add local FLDB to each MDT, so OSD/OUT can check whether
FID is remote by looking up local FLDB, i.e. no need send RPC
to MDT0. This is just the client part of the work.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4076
Reviewed-on: http://review.whamcloud.com/7884 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Thu, 28 Apr 2016 01:37:17 +0000 (21:37 -0400)]
staging: lustre: llite: debugging for ll_file_open LASSERT
Add debugging for LASSERTF(it_disposition(it, DISP_ENQ_OPEN_REF)
in ll_file_open(), since this is a rarely hit failure under racer,
and it would be useful to get more information if this is hit
again. Print the full intent disposition, as well as the status,
in case Oleg's earlier comment about bailing out on any error is
actually the case here.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1993
Reviewed-on: http://review.whamcloud.com/6250 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Thu, 28 Apr 2016 01:37:15 +0000 (21:37 -0400)]
staging: lustre: fid: add a connect flag for open by FID
Add OBD_CONNECT_OPEN_BY_FID for open by FID, if MDS supports this,
for open by FID, it won't retry with name if object with the FID
doesn't exist; while if client supports this, client won't pack
name in open request if FID is known.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3544
Reviewed-on: http://review.whamcloud.com/8093 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: obd: cleanup client import if client_obd_setup fails
client_obd_setup() allocates an obd_import which should be cleaned up
if there is any failure afterwards in callers of client_obd_setup().
This patch fixes the bug in osc_setup(), mgc_setup(), mdc_setup() and
lwp_setup(). The fix is to call obd_cleanup_client_import() before
calling client_obd_cleanup() in case of an error.
Signed-off-by: Swapnil Pimpale <spimpale@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3810
Reviewed-on: http://review.whamcloud.com/7561 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Thu, 28 Apr 2016 01:37:11 +0000 (21:37 -0400)]
staging: lustre: obd: add newline for dumped config record
The function class_config_parse_rec() parses the llog record
and places it into a buffer to be returned. That buffer needs
to end with a newline which is currently missing.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2149
Reviewed-on: http://review.whamcloud.com/4254 Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Wed, 27 Apr 2016 22:21:07 +0000 (18:21 -0400)]
staging: lustre: ptlrpc: quiet warning for 2.1/2.5 connections
The Lustre 2.5.4 client will print a warning about connections with
2.1.3 servers, yet they are still supposed to be interoperable.
Increase the window of warning to be up to Lustre 2.5.50, since we
do not intend to allow interoperability between 2.1 and 2.6 systems.
This was from the time when major releases like Lustre 1.4 and 1.8
were many years apart would have no chance for interoperation.
Only print this message once per client, to avoid flooding the console
for connections to many servers or frequent network reconnections.
Server versions should all be nearly the same in any case.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2528
Reviewed-on: http://review.whamcloud.com/7916 Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Jian Yu <jian.yu@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: osc: Use SOFT_SYNC to urge server commit
This change adds a BRW page flag, OBD_BRW_SOFT_SYNC. This flag is
intended to urge a server to commit a client's unstable pages to
stable storage. A client will add this flag to any BRW requests while
it is in a state where it has "many" unstable pages pinned in its cache.
The server, upon receiving a page with this flag set, *should* begin
an async commit. The idea being that, with the proactive async commit,
the client's pinned unstable pages will transition into a stable state
faster than they would have otherwise. Although, the server side portion
of this agreement is still unimplemented, so the OBD_BRW_SOFT_SYNC flag
will currently fall on deaf ears.
staging: lustre: osc: Track number of "unstable" pages per osc
This change adds simple accounting hooks for "unstable" pages on a per
OSC basis. Now, in addition to the per filesystem tracking, each OSC
will maintain a running total of its unstable pages. These counters are
exported through the proc interface, and can be read using the lctl
command.
For example:
# Read number of unstable pages contained by each OSC
lctl get_param osc.*.unstable_stats
The motivation for this change is in anticipation of implementing a
"soft sync" functionality, urging servers to commit these unstable
pages to stable storage. The per OSC accounting allows a client to
limit the soft sync request to only the OSCs which have outstanding
unstable pages.
staging: lustre: osc: Track and limit "unstable" pages
This change adds a global counter to track the number of "unstable"
pages held by a given client, along with per file system counters. An
"unstable" page is defined as a page which has been sent to the server
as part of a bulk request, but is uncommitted to stable storage.
In addition to simply tracking the unstable pages, they now also count
towards the maximum number of "pinned" pages on the system at any given
time. Thus, a client will now be bound on the number of dirty and
unstable pages it can pin in memory. Previously only dirty pages were
accounted for in this limit.
In addition to tracking the number of unstable pages in Lustre, the
NR_UNSTABLE_NFS memory zone is also incremented and decremented for
easy monitoring using the "NFS_Unstable:" field in /proc/meminfo.
This field is also used internally by the kernel to limit the total
amount of unstable pages on the system.
The motivation for this change is twofold. First, the client must not
allow itself to disconnect from an OST while still holding unstable
pages. Otherwise, these unstable pages can get lost due to an OST
failure, and replay is not possible due to the disconnect via unmount.
Secondly, the client needs a mechanism to prevent it from allocating too
much of its available RAM to unreclaimable pages pinned by the ptlrpc
layer. If this case occurs, out of memory events can trigger as a side
effect, which we need to avoid.
The current number of unstable pages accounted for on a per file system
granularity is exported by the unstable_stats proc file, contained under
each file system's llite namespace. An example of retrieving this
information is below:
Fix 'error handling' issues found by Coverity version 6.6.1:
Unchecked return value (CHECKED_RETURN)
Calling function without checking return value.
Argument cannot be negative (NEGATIVE_RETURNS)
Negative value used as argument to a function expecting a
positive value.
James Nunez [Wed, 27 Apr 2016 22:21:01 +0000 (18:21 -0400)]
staging: lustre: llite: Replace printing of i_ino with ll_inode2fid()
The printing of i_ino/i_generation in llite messages is not nearly so
useful as printing the full inode FID, since i_ino is a "compressed"
version of the FID and there may be duplicate values for i_ino in some
cases (especially if running on a 32-bit client).
All instances of printing i_ino/i_generation are replaced with
the FID using ll_inode2fid(). All instances, except for one, of
printing just i_ino was replaced by printing the FID. In all
CERROR lines touched by the i_ino replacements, the device name
or fsname was added at the beginning of the message if it did not
already exist.
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3491
Reviewed-on: http://review.whamcloud.com/6848 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wireshark output moved to userland file "lustre_dlm_flags_wshark.c"
and only bits that can actually appear "on the wire" are emitted.
The user land "packet-lustre.c" code that references these bits
now gets emitted into that file. e.g. the "local_only" bit is
never put on the wire, so references to it in wireshark are gone.
Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906 Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963 Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruce Korb [Wed, 27 Apr 2016 22:20:58 +0000 (18:20 -0400)]
staging: lustre: ldlm: clean up l_flags
Remove the now obsolete LDLM_AST_FLAGS and LDLM_INHERIT_FLAGS defines.
Remove the obsolete LDLM_FL_HIDE_LOCK_MASK define.
Rename "local_only" mask to "off_wire" since it is confusingly similar
to a flag that (I think) means, "do not copy this lock over the wire."
Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906 Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963 Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruce Korb [Wed, 27 Apr 2016 22:20:57 +0000 (18:20 -0400)]
staging: lustre: ldlm: use accessor macros for l_flags
Convert most of the ldlm lock's l_flags references from direct
bit twiddling to using bit specific macros. A few multi-bit
operations are left as an exercise for the reader.
The changes are mostly in ldlm, but also in llite, osc and quota.
Also add a multi-bit (mask) test.
Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906 Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963 Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: lmv: kernel crash due to misconfigured MDT
There are few places with access to lmv->tgts[] without check for NULL.
Usually it may happens when MDT configured starting from index 1
instead of 0. For example:
mkfs.lustre --reformat --mgs --mdt --index=1 /dev/sdd1
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4098
Reviewed-on: http://review.whamcloud.com/7941 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Di [Wed, 27 Apr 2016 22:20:55 +0000 (18:20 -0400)]
staging: lustre: obdclass: add LCT_SERVER_SESSION for server session
Add LCT_SERVER_SESSION for server session, and separate the
server session flag from LCT_SESSION, so to avoid allocating
session info for client stack for each server request, if
client and server are on the same node.
Signed-off-by: Wang Di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3806
Reviewed-on: http://review.whamcloud.com/7412 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: llite: reset writeback index in ll_writepages
Otherwise after one round the writeback index will become beyond
the file size and ->writepages() turns into an empty operation.
Also, a safety guard is added to limit the wait time for grant to
10 minutes(take recovery into consideration) at maximum in the
osc_enter_cache() function. Otherwise, EDQUOT will be returned to
the applications to start sync write.
staging: lustre: lov: Don't wait for active target with OBD_STATFS_NODELAY
Patch for LU-631 which was landed before the upstream merge broke
OBD_STATFS_NODELAY behaviour. It adds unnecessary delay while
running df command with inactive OSTs. We shouldn't try to recover
connection to OST in this case.
Bruno Faccini [Tue, 12 Apr 2016 20:14:13 +0000 (16:14 -0400)]
staging: lustre: lov: return minimal FIEMAP for released files
Since st_blocks = NULL is returned for released files, FIEMAP
should at least return a minimal mapping to make users aware
that file contains data but it is not immediately available.
This will make coreutils and tools such tar happy and have
them presume file is sparse.
Also, add a new test_228 in sanity-hsm to verify it works
for "[cp,tar] --sparse" commands.
Also fix a LBUG ("lov_fiemap()) ASSERTION( fm_local ) failed")
likely to occur when no-object/ENOMEM conditions and also now
when released.
Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3864
Reviewed-on: http://review.whamcloud.com/7584 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copy optimization for truncate down - only copy the part under
truncate length. If a file is truncated to zero usually it'll be
followed by write so I choose to restore the file and set correct
stripe information.
staging: lustre: ptlrpc: return a meaningful status from ptlrpcd_init()
This patch has the following:
1) Fix for the return value from ptlrpcd_init(). It will now return a
correct status instead of returning zero always.
2) ptlrpcd_addref() should not increment ptlrpcd_users on error.
3) Added code in a mdc_setup() and mgc_setup() to test the return
value of ptlrpcd_addref() and return on error.
Signed-off-by: Swapnil Pimpale <spimpale@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3808
Reviewed-on: http://review.whamcloud.com/7522 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Tue, 12 Apr 2016 20:14:08 +0000 (16:14 -0400)]
staging: lustre: obd: MDT mount fails on MDS w/o MGS on it
If we specify multiple --mgsnode for a MDT, when we start MDS upon
it while MGS is no the other node, the MGC import connection will
always select the local nid (which is one of the candidate mgsnode)
since it think its the closest connection.
This patch treats further --mgsnode nids as failover nids, so that
multiple import connections are added for the MGC import.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3829
Reviewed-on: http://review.whamcloud.com/7509 Reviewed-by: Liang Zhen <liang.zhen@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: llite: error setting max_cache_mb at mount time
The root cause is that when max_cache_mb conf parameter is applied,
the client isn't connected to the OST yet so that sbi->ll_dt_exp is
NULL. However, it's not necessary to shrink the cache memory in this
case so success should be returned.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3676
Reviewed-on: http://review.whamcloud.com/7194 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Bobi Jam <bobijam@gmail.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruno Faccini [Tue, 12 Apr 2016 20:14:04 +0000 (16:14 -0400)]
staging: lustre: ldlm: refine LU-2665 patch for POSIX compliance
Follow-on to patch introduced to fix LU-2665 ticket (Gerrit
Change at http://review.whamcloud.com/6415 with Change-Id:
I8faa331712abeadee46eabe111ee1c23a05840d5).
Original patch introduced regressions against POSIX test suite
(fcntl.18/fcntl.35 tests in LSB-VSX POSIX test suite at
http://www.opengroup.org/testing/linux-test/lsb-vsx.html),
so the idea is to only resend F_UNLCKs to have both LU-2665 bug
and POSIX test suite happy.
Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3701
Reviewed-on: http://review.whamcloud.com/7453 Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruno Faccini [Tue, 12 Apr 2016 20:14:03 +0000 (16:14 -0400)]
staging: lustre: ldlm: Fix a race during FLock handling
Protect against race where lock could have been just destroyed
due to overlap, in ldlm_process_flock_lock().
Easy reproducer is BULL's NFS Locktests in pthread mode.
(http://nfsv4.bullopensource.org/tools/tests/locktest.php)
Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1126
Reviewed-on: http://review.whamcloud.com/7134 Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging/lustre: Fix blank line after/before {/} style
This patch fixes all checkpatch occurences of
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Blank lines aren't necessary before a close brace '}'
in Lustre code.
Merge tag 'iio-for-4.7b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
Jonathan writes:
2nd set of new device support, features and cleanup for IIO in the 4.7 cycle.
Bit of a bumper set for new drivers but plenty of other stuff here as well!
New device support
* ad5592R ADC/DAC
- new driver supporting ad5592r and ad5593r combined ADC/DAC and gpio chips.
* Aosong am2315 relative humidity
- new driver with triggered buffer support in follow up patch.
* bmi160 imu
- new driver
* bmp280
- bmp180 support - note there is support in the misc/bmp085 driver. Intent
is to remove that driver long term.
* invensense mpu6050
- cleanup leading to explicit support of mpu9150 with a good few cleanups
along the way.
* Hope RF hp03 pressure and temperature sensor.
- new driver
* maxim DS1803 potentiometer
- new driver
* maxim max44000 light and proximity sensor
- new driver built in a series of steps to support pretty much everything.
* ROHM BH1780 light sensor
- new driver. There is an existing driver in misc that this is pretty much
intended to replace. The discussion on whether to support the non standard
interface of that driver is some way is continuing.
* st-gyro
- lsm9ds0-gyro. The accel/magn side of this will take a while longer as
extensions to the st library are needed for cases where two types of sensor
share a single i2c address.
* ti-adc081c
- support the adc101c and adc121c
* Vishay VEML6070 UV sensor
- new driver.
New features
* core
- devm_ APIs for channel_get and channel_get_all. The first user of these
is the generic ADC based thermal driver. As it is going through the
thermal tree these will be picked up as a patch to that next cycle as that
is how the author preferred to do it.
- mounting matrix support. This new core support allows devices to provide
to userspace (typically from the device tree) allowing compensation for how
the sensor is mounted on the device. First examples are on UAVs but it
has a more mundane use on typical phone where the chip may be on the front
or the back of the circuit board and soldered at any angle. Includes
support for this ABI in ak8975 (which has an older interface, now
deprecated) and mpu6050.
* tools
- add a -a option to enable all available channels in generic_buffer sample.
Makes it somewhat easier to use.
* adis library and drivers
- support manual self test flag clearing. This has technically been broken
for a very long time - result is an offset on readings as the applied field
is on all the time.
* ak8975
- triggered buffer support
* bmc150
- spi support (including splitting the driver into core and i2c parts)
* bmp280
- oversampling support.
* dht11
- improved logging - useful to debug timing issues on this quirky device.
* st-sensors
- read each channel invidivually as not all support the optimization of
reading in bulk. This is technically a fix, but will need to be backported
if desired.
- support open drain and shared interrupts.
* ti-adc081c
- triggered buffer support.
Cleanups
* inkern
- white space fix.
* ad7606
- use the iio_device_claim_direct_mode call rather than open coding equiv.
* ad799x
- white space fix.
* ad9523
- unsigned -> unsigned int
* apds9660
- brace location tidying up.
- silence an uninitialized variable warning.
* ak8975
- else and brace on same line fix.
* at91_adc
- white space fixes.
* bmc150
- use regmap stored copy of the device pointer rather than having an
additional copy.
* bmg160
- use regmap stored copy of the device pointer rather than having an
additional copy.
* hid-sensors
- white space fixes.
* mcp3422
- white space fix.
* mma7455
- use regmap to retrieve the device struct rather than carrying another copy
in the private data.
* ms_sensors
- white space fix.
* mxs-lradc
- move current bindings out of staging - some will be shortly deprecated but
the reality is that we have device trees out there using them so they will
need to be supported for some time. They accidentally got left behind
when the driver graduated from staging.
- white space cleanup.
- set INPUT_PROP_DIRECT.
- move ts config into a better function.
- move the STMP reset out of the ADC init.
* vf610_adc
- case label indenting fix.
iio: inv_mpu6050: Add explicit support for MPU9150
This device is a package containing a MPU6050-like sensor and an AK8975
magnetometer. The magnetometer component is supported by the existing
ak8975 driver.
This patch also rephrases the Kconfig descriptions.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Acked-by: Ge Gao <ggao@invensense.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: inv_mpu6050: Add spi_device_id for INV_MPU6500
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Acked-by: Ge Gao <ggao@invensense.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: inv_mpu6050: Check WHO_AM_I register on probe
This can be used to distinguish mpu6500. This is a warning rather than
an error because the differences are mostly irrelevant and it's nice to
avoid breaking users with slightly incorrect ACPI/DT.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Acked-by: Ge Gao <ggao@invensense.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The hw_info array was indexed by enum inv_devices chip_type despite the
fact that the enumeration had more members than the array and was
ordered differently.
The patch cleans this up and adds explicit chip_types to i2c/spi/acpi
IDs. It also adds some stricter checks inside the driver core.
This happened to work so far because the differences between the
supported models are very minor.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Acked-by: Ge Gao <ggao@invensense.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Akinobu Mita [Sun, 24 Apr 2016 13:52:10 +0000 (22:52 +0900)]
iio: pressure: bmp280: add support for BMP180
This adds support for the BMP180 to the bmp280 iio driver.
The BMP180 has already been supported by misc/bmp085 driver but it
doesn't use iio framework. This change adds the kconfig dependency
not to be selected both of them in order to avoid any issues.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Vlad Dogaru <vlad.dogaru@intel.com> Cc: Christoph Mair <christoph.mair@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch exposes ALSTIM as illuminance_integration_time and ALSPGA as
illuminance_scale.
Changing ALSTIM also changes the number of bits available in the data
register. This is handled inside raw value reading because:
* It's very easy to shift a few bits
* It allows SCALE and INT_TIME to be completely independent controls
* Buffer support requires constant scan_type.realbits per-channel
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is exposed as an output channel with "led" as an extend_name.
Other sensors also have support for controlling an external LED. It's
not clear that simply exposing an undecorated output channel is the
correct approach.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The proximity sensor relies on sending pulses to an external IR led and
it is disabled by default on powerup. The driver will enable it with a
default power setting.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Marek Vasut [Mon, 18 Apr 2016 14:05:24 +0000 (16:05 +0200)]
iio: pressure: hp03: Add Hope RF HP03 sensor support
Add support for HopeRF pressure and temperature sensor.
This device uses two fixed I2C addresses, one for storing
calibration coefficients and another for accessing the ADC.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Matt Ranostay <mranostay@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Wed, 20 Apr 2016 17:23:45 +0000 (19:23 +0200)]
iio:imu:mpu6050: enhance mounting matrix support
Add a new rotation matrix sysfs attribute compliant with IIO core
mounting matrix API.
Matrix is retrieved from "in_anglvel_mount_matrix" and
"in_accel_mount_matrix" sysfs attributes. It is declared into mpu6050 DTS
entry as a "mount-matrix" property.
Old interface is kept for backward userspace compatibility and may be
retrieved from legacy platform_data mechanism only.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Wed, 20 Apr 2016 17:23:44 +0000 (19:23 +0200)]
iio:ak8975: add mounting matrix support
Expose a rotation matrix to indicate userspace the chip orientation with
respect to the overall hardware system.
Matrix is retrieved from "in_mount_matrix". It is declared into ak8975 DTS
entry as a "mount-matrix" property.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Wed, 20 Apr 2016 17:23:43 +0000 (19:23 +0200)]
iio:core: mounting matrix support
Expose a rotation matrix to indicate userspace the chip placement with
respect to the overall hardware system. This is needed to adjust
coordinates sampled from a sensor chip when its position deviates from the
main hardware system.
Final coordinates computation is delegated to userspace since:
* computation may involve floating point arithmetics ;
* it allows an application to combine adjustments with arbitrary
transformations.
This 3 dimentional space rotation matrix is expressed as 3x3 array of
strings to support floating point numbers. It may be retrieved from a
"[<dir>_][<type>_]mount_matrix" sysfs attribute file. It is declared into a
device / driver specific DTS property or platform data.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: Add resource managed APIs devm_iio_channel_{get,release) in devres
Add following APIs in the list of managed resources of IIO:
devm_iio_channel_get()
devm_iio_channel_get_all()
devm_iio_channel_release()
devm_iio_channel_release_all()
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: core: Add devm_ APIs for iio_channel_{get,release}_all
Some of kernel driver uses the IIO framework to get the sensor
value via ADC or IIO HW driver. The client driver get iio channel
by iio_channel_get_all() and release it by calling
iio_channel_release_all().
Add resource managed version (devm_*) of these APIs so that if client
calls the devm_iio_channel_get_all() then it need not to release it
explicitly, it can be done by managed device framework when driver
get un-binded.
This reduces the code in error path and also need of .remove callback in
some cases.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: core: Add devm_ APIs for iio_channel_{get,release}
Some of kernel driver uses the IIO framework to get the sensor
value via ADC or IIO HW driver. The client driver get iio channel
by iio_channel_get() and release it by calling iio_channel_release().
Add resource managed version (devm_*) of these APIs so that if client
calls the devm_iio_channel_get() then it need not to release it explicitly,
it can be done by managed device framework when driver get un-binded.
This reduces the code in error path and also need of .remove callback in
some cases.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
projects / linux-beck.git / log