cciss: cleanup bitops usage

- Remove unnecessary correction of bit and address
- Use BITS_TO_LONGS macro to calculate bitmap size
- Use bitmap_zero()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/scsi/atp870u.c: fix bad use of udelay

The ACARD driver calls udelay() with a value > 2000, which leads to
to the following compilation error on ARM:
  ERROR: "__bad_udelay" [drivers/scsi/atp870u.ko] undefined!
  make[1]: *** [__modpost] Error 1

This is because udelay is defined on ARM, roughly speaking, as

#define udelay(n) ((n) > 2000 ? __bad_udelay() : \
__const_udelay((n) * ((2199023U*HZ)>>11)))

The argument to __const_udelay is the number of jiffies to wait divided by
4, but this does not work unless the multiplication does not overflow, and
that is what the build error is designed to prevent.  The intended
behavior can be achieved by using mdelay to call udelay multiple times in
a loop.

[jn: adding context]
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

readahead: fault retry breaks mmap file read random detection

.fault now can retry.  The retry can break state machine of .fault.  In
filemap_fault, if page is miss, ra->mmap_miss is increased.  In the second
try, since the page is in page cache now, ra->mmap_miss is decreased.  And
these are done in one fault, so we can't detect random mmap file access.

Add a new flag to indicate .fault is tried once.  In the second try, skip
ra->mmap_miss decreasing.  The filemap_fault state machine is ok with it.

I only tested x86, didn't test other archs, but looks the change for other
archs is obvious, but who knows :)

Signed-off-by: Shaohua Li <shaohua.li@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

unicore32: select generic atomic64_t support

It's required for the core fs/namespace.c and many other basic features.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

h8300: select generic atomic64_t support

Rationales from Eric:

So I just looked a little deeper and it appears architectures that do
not support atomic64_t are broken.

The generic atomic64 support came in 2009 to support the perf subsystem
with the expectation that all architectures would implement atomic64
support.

Furthermore upon inspection of the kernel atomic64_t is used in a fair
number of places beyond the performance counters:

block/blk-cgroup.c
drivers/acpi/apei/
drivers/block/rbd.c
drivers/crypto/nx/nx.h
drivers/gpu/drm/radeon/radeon.h
drivers/infiniband/hw/ipath/
drivers/infiniband/hw/qib/
drivers/staging/octeon/
fs/xfs/
include/linux/perf_event.h
include/net/netfilter/nf_conntrack_acct.h
kernel/events/
kernel/trace/
net/mac80211/key.h
net/rds/

The block control group, infiniband, xfs, crypto, 802.11, netfilter.
Nothing quite so fundamental as fs/namespace.c but definitely in
multiplatform-code that should work, and is already broken on those
architecutres.

Looking at the implementation of atomic64_add_return in lib/atomic64.c the
code looks as efficient as these kinds of things get.

Which leads me to the conclusion that we need atomic64 support on all
architectures.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kbuild: make: fix if_changed when command contains backslashes

The call if_changed mechanism does not work when the command
contains backslashes. This basically is an issue with lzo
and bzip2 compressed kernels. The compressed binaries do not
contain the uncompressed image size, so these use size_append
to append the size. This results in backslashes in the executed
command. With this if_changed always detects a change in the
command and rebuilds the compressed image even if nothing
has changed.

Fix this by escaping backslashes in make-cmd

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

checksyscalls: fix "here document" handling

"echo" doesn't read from stdin, therefore the checksyscalls script didn't
warn about not implemented system calls anymore since 29dc54c6
"checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source".

Use "cat" instead of "echo" which handles this correctly.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

time: don't inline EXPORT_SYMBOL functions

How is the compiler even handling exported functions that are marked
inline?  Anyway, these shouldn't be inline because of that, so remove that
marking.

Based on a larger patch by Mark Charlebois to get LLVM to build the
kernel.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Charlebois <mcharleb@qualcomm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: hank <pyu@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

timeconst.pl: remove deprecated defined(@array)

The use of defined() on arrays and hashes has been deprecated since perl
5.6, but until 5.17.6 it only warned on lexicals, not package globals.

Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drm/i915: optimize DIV_ROUND_CLOSEST() call

DIV_ROUND_CLOSEST is faster if the compiler knows it will only be dealing
with unsigned dividends.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pcmcia: move unbind/rebind into dev_pm_ops.complete

Move the device rebind procedures for cardbus devices from the pm.resume
into the pm.complete callback.

The reason for moving the code is: "[...] The PM code needs to send
suspend and resume messages to every device in the right order, and it
can't do that if new devices are being added at the same time.  [...]"

However the situation really isn't quite that rigid.  In particular,
adding new children during a resume callback shouldn't cause much of
problem because the children don't need to be resumed anyway (since they
were never suspended).  On the other hand, if you do it you will get a
dev_warn() from the PM core, something like 'parent should not be
sleeping'.

Still, it is considered bad form and should be avoided if possible."

(Alan Stern's full comment about the topic can
be found here: <https://lkml.org/lkml/2012/7/10/254>)

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/dma/dmaengine.c: lower the priority of 'failed to get' dma channel message

Do the same as commit a03a202e9 ("dmaengine: failure to get a specific DMA
channel is not critical") to get rid of the following messages during
kernel boot:

dmaengine_get: failed to get dma1chan0: (-22)
dmaengine_get: failed to get dma1chan1: (-22)
dmaengine_get: failed to get dma1chan2: (-22)
dmaengine_get: failed to get dma1chan3: (-22)
dmaengine_get: failed to get dma1chan4: (-22)
dmaengine_get: failed to get dma1chan5: (-22)
dmaengine_get: failed to get dma1chan6: (-22)
dmaengine_get: failed to get dma1chan7: (-22)
dmaengine_get: failed to get dma1chan8: (-22)
dmaengine_get: failed to get dma1chan9: (-22)
dmaengine_get: failed to get dma1chan10: (-22)
dmaengine_get: failed to get dma1chan11: (-22)
dmaengine_get: failed to get dma1chan12: (-22)
dmaengine_get: failed to get dma1chan13: (-22)
dmaengine_get: failed to get dma1chan14: (-22)
dmaengine_get: failed to get dma1chan15: (-22)
dmaengine_get: failed to get dma1chan16: (-22)
dmaengine_get: failed to get dma1chan17: (-22)
dmaengine_get: failed to get dma1chan18: (-22)
dmaengine_get: failed to get dma1chan19: (-22)
dmaengine_get: failed to get dma1chan20: (-22)
dmaengine_get: failed to get dma1chan21: (-22)
dmaengine_get: failed to get dma1chan22: (-22)
dmaengine_get: failed to get dma1chan23: (-22)
dmaengine_get: failed to get dma1chan24: (-22)
dmaengine_get: failed to get dma1chan25: (-22)
dmaengine_get: failed to get dma1chan26: (-22)
dmaengine_get: failed to get dma1chan27: (-22)
dmaengine_get: failed to get dma1chan28: (-22)
dmaengine_get: failed to get dma1chan29: (-22)

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mn10300: only add -mmem-funcs to KBUILD_CFLAGS if gcc supports it

It seems the current (gcc 4.6.3) no longer provides this so make it
conditional.

As reported by Tony before, the mn10300 architecture cross-compiles with
gcc-4.6.3 if -mmem-funcs is not added to KBUILD_CFLAGS.

Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

audit.h: replace defines with C stubs

Replace the #defines used when CONFIG_AUDIT or CONFIG_AUDIT_SYSCALLS are
disabled so we get type checking during those builds.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86 numa: don't check if node is NUMA_NO_NODE

If we aren't debugging per_cpu maps, the cpu's node is stored in per_cpu
variable numa_node.  If `node' is NUMA_NO_NODE, it means the caller wants
to clear the cpu's node.  So we should also call set_cpu_numa_node() in
this case.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arch/x86/platform/iris/iris.c: register a platform device and a platform driver

This makes the iris driver use the platform API, so it is properly exposed
in /sys.

[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout]
Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: auto bind the memory device which is hotplugged before the driver is loaded

If the memory device is hotplugged before the driver is loaded, the user
cannot see this device under the directory /sys/bus/acpi/devices/, and the
user cannot bind it by hand after the driver is loaded.  This patch
introduces a new feature to bind such device when the driver is being
loaded.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: bind the memory device when the driver is being loaded

We had introduced acpi_hotmem_initialized to avoid strange add_memory fail
message.  But the memory device may not be used by the kernel, and the
device should be bound when the driver is being loaded.  Remove
acpi_hotmem_initialized to allow that the device can be bound when the
driver is being loaded.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: don't allow to eject the memory device if it is being used

We eject the memory device even if it is in use.  It is very dangerous,
and it will cause the kernel to panic.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: remove memory info from list before freeing it

We free info, but we forget to remove it from the list.  It will cause
unexpected problems when we access the list next time.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: free memory device if acpi_memory_enable_device() failed

If acpi_memory_enable_device() fails, acpi_memory_enable_device() will
return a non-zero value, which means we fail to bind the memory device to
this driver.  So we should free memory device before
acpi_memory_device_add() returns.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: fix memory leak when memory device is unbound from the module acpi_memhotplug

We allocate memory to store acpi_memory_info, so we should free it before
freeing mem_device.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86 cpu_hotplug: unmap cpu2node when the cpu is hotremoved

When a cpu is hotplugged, we call acpi_map_cpu2node() in
_acpi_map_lsapic() to store the cpu's node.  But we don't clear the cpu's
node in acpi_unmap_lsapic() when this cpu is hotremoved.  If the node is
also hotremoved, We will get the following messages:

[ 1646.771485] kernel BUG at include/linux/gfp.h:329!
[ 1646.828729] invalid opcode: 0000 [#1] SMP
[ 1646.877872] Modules linked in: ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel microcode pcspkr i2c_i801 i2c_core lpc_ich mfd_core ioatdma e1000e i7core_edac edac_core sg acpi_memhotplug igb dca sd_mod crc_t10dif megaraid_sas mptsas mptscsih mptbase scsi_transport_sas scsi_mod
[ 1647.588773] Pid: 3126, comm: init Not tainted 3.6.0-rc3-tangchen-hostbridge+ #13 FUJITSU-SV PRIMEQUEST 1800E/SB
[ 1647.711545] RIP: 0010:[<ffffffff811bc3fd>]  [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300
[ 1647.810492] RSP: 0018:ffff88078a049cf8  EFLAGS: 00010246
[ 1647.874028] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 1647.959339] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000246
[ 1648.044659] RBP: ffff88078a049d38 R08: 00000000000040d0 R09: 0000000000000001
[ 1648.129953] R10: 0000000000000000 R11: 0000000000000b5f R12: 00000000000052d0
[ 1648.215259] R13: ffff8807c1417300 R14: 0000000000030038 R15: 0000000000000003
[ 1648.300572] FS:  00007fa9b1b44700(0000) GS:ffff8807c3800000(0000) knlGS:0000000000000000
[ 1648.397272] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1648.465985] CR2: 00007fa9b09acca0 CR3: 000000078b855000 CR4: 00000000000007e0
[ 1648.551265] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1648.636565] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1648.721838] Process init (pid: 3126, threadinfo ffff88078a048000, task ffff8807bb6f2650)
[ 1648.818534] Stack:
[ 1648.842548]  ffff8807c39d7fa0 ffffffff000040d0 00000000000000bb 00000000000080d0
[ 1648.931469]  ffff8807c1417300 ffff8807c39d7fa0 ffff8807c1417300 0000000000000001
[ 1649.020410]  ffff88078a049d88 ffffffff811bc4a0 ffff8807c1410c80 0000000000000000
[ 1649.109464] Call Trace:
[ 1649.138713]  [<ffffffff811bc4a0>] new_slab+0x30/0x1b0
[ 1649.199075]  [<ffffffff811bc978>] __slab_alloc+0x358/0x4c0
[ 1649.264683]  [<ffffffff810b71c0>] ? alloc_fair_sched_group+0xd0/0x1b0
[ 1649.341695]  [<ffffffff811be7d4>] kmem_cache_alloc_node_trace+0xb4/0x1e0
[ 1649.421824]  [<ffffffff8109d188>] ? hrtimer_init+0x48/0x100
[ 1649.488414]  [<ffffffff810b71c0>] ? alloc_fair_sched_group+0xd0/0x1b0
[ 1649.565402]  [<ffffffff810b71c0>] alloc_fair_sched_group+0xd0/0x1b0
[ 1649.640297]  [<ffffffff810a8bce>] sched_create_group+0x3e/0x110
[ 1649.711040]  [<ffffffff810bdbcd>] sched_autogroup_create_attach+0x4d/0x180
[ 1649.793260]  [<ffffffff81089614>] sys_setsid+0xd4/0xf0
[ 1649.854694]  [<ffffffff8167a029>] system_call_fastpath+0x16/0x1b
[ 1649.926483] Code: 89 c4 e9 73 fe ff ff 31 c0 89 de 48 c7 c7 45 de 9e 81 44 89 45 c8 e8 22 05 4b 00 85 db 44 8b 45 c8 0f 89 4f ff ff ff 0f 0b eb fe <0f> 0b 90 eb fd 0f 0b eb fe 89 de 48 c7 c7 45 de 9e 81 31 c0 44
[ 1650.161454] RIP  [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300
[ 1650.232348]  RSP <ffff88078a049cf8>
[ 1650.274029] ---[ end trace adf84c90f3fea3e5 ]---

The reason is that: the cpu's node is not NUMA_NO_NODE, we will call
alloc_pages_exact_node() to alloc memory on the node, but the node is
offlined.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

vfs: d_obtain_alias() needs to use "/" as default name.

NFS appears to use d_obtain_alias() to create the root dentry rather than
d_make_root.  This can cause 'prepend_path()' to complain that the root
has a weird name if an NFS filesystem is lazily unmounted.  e.g.  if
"/mnt" is an NFS mount then

 { cd /mnt; umount -l /mnt ; ls -l /proc/self/cwd; }

will cause a WARN message like
   WARNING: at /home/git/linux/fs/dcache.c:2624 prepend_path+0x1d7/0x1e0()
   ...
   Root dentry has weird name <>

to appear in kernel logs.

So change d_obtain_alias() to use "/" rather than "" as the anonymous
name.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selinux: fix sel_netnode_insert() suspicious rcu dereference

===============================
[ INFO: suspicious RCU usage. ]
3.5.0-rc1+ #63 Not tainted
-------------------------------
security/selinux/netnode.c:178 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by trinity-child1/8750:
 #0:  (sel_netnode_lock){+.....}, at: [<ffffffff812d8f8a>] sel_netnode_sid+0x16a/0x3e0

stack backtrace:
Pid: 8750, comm: trinity-child1 Not tainted 3.5.0-rc1+ #63
Call Trace:
 [<ffffffff810cec2d>] lockdep_rcu_suspicious+0xfd/0x130
 [<ffffffff812d91d1>] sel_netnode_sid+0x3b1/0x3e0
 [<ffffffff812d8e20>] ? sel_netnode_find+0x1a0/0x1a0
 [<ffffffff812d24a6>] selinux_socket_bind+0xf6/0x2c0
 [<ffffffff810cd1dd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff810cdb55>] ? lock_release_holdtime.part.9+0x15/0x1a0
 [<ffffffff81093841>] ? lock_hrtimer_base+0x31/0x60
 [<ffffffff812c9536>] security_socket_bind+0x16/0x20
 [<ffffffff815550ca>] sys_bind+0x7a/0x100
 [<ffffffff816c03d5>] ? sysret_check+0x22/0x5d
 [<ffffffff810d392d>] ? trace_hardirqs_on_caller+0x10d/0x1a0
 [<ffffffff8133b09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff816c03a9>] system_call_fastpath+0x16/0x1b

This patch below does what Paul McKenney suggested in the previous thread.

Signed-off-by: Dave Jones <davej@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

CRIS: Fix I/O macros

The inb/outb macros for CRIS are broken from a number of points of view,
missing () around parameters and they have an unprotected if statement in
them.  This was breaking the compile of IPMI on CRIS and thus I was being
annoyed by build regressions, so I fixed them.

Plus I don't think they would have worked at all, since the data values
were missing "&" and the outsl had a "3" instead of a "4" for the size.
From what I can tell, this stuff is not used at all, so this can't be any
more broken than it was before, anyway.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

idr-rename-max_level-to-max_idr_level-fix-3

Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

idr-rename-max_level-to-max_idr_level-fix-fix-2

ho hum

Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: walter harms <wharms@bfs.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

idr-rename-max_level-to-max_idr_level-fix

repair fallout

Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: walter harms <wharms@bfs.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

idr: rename MAX_LEVEL to MAX_IDR_LEVEL

To avoid name conflicts:

drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined

While at it, also make the other names more consistent and add
parentheses.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: walter harms <wharms@bfs.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge remote-tracking branch 'signal/for-next'

Conflicts:
arch/cris/include/asm/Kbuild
arch/h8300/include/asm/Kbuild
arch/m32r/include/asm/Kbuild
arch/x86/kernel/signal.c

Merge remote-tracking branch 'userns/for-next'

Merge remote-tracking branch 'pwm/for-next'

Merge remote-tracking branch 'dma-mapping/dma-mapping-next'

Conflicts:
Documentation/devicetree/bindings/ata/ahci-platform.txt
arch/arm/boot/dts/highbank.dts

Merge remote-tracking branch 'kvmtool/master'

Merge remote-tracking branch 'tegra/for-next'

Conflicts:
arch/arm/mach-tegra/devices.c

Merge remote-tracking branch 'samsung/for-next'

Conflicts:
drivers/pinctrl/Makefile

Merge remote-tracking branch 'renesas/next'

Merge remote-tracking branch 'msm/for-next'

Conflicts:
arch/arm/mach-vt8500/include/mach/restart.h

Merge remote-tracking branch 'ixp4xx/next'

Merge remote-tracking branch 'ep93xx/ep93xx-for-next'

Merge remote-tracking branch 'arm-soc/for-next'

Conflicts:
arch/arm/mach-imx/clk-imx51-imx53.c
arch/arm/mach-ux500/cpu-db8500.c
drivers/i2c/busses/i2c-omap.c
drivers/input/keyboard/omap-keypad.c
drivers/mmc/host/omap.c
drivers/mtd/nand/Kconfig
drivers/staging/tidspbridge/core/wdt.c
drivers/usb/host/Kconfig
drivers/video/omap2/dss/dispc.c
drivers/w1/masters/omap_hdq.c

Merge remote-tracking branch 'gpio-lw/for-next'

Merge remote-tracking branch 'remoteproc/for-next'

Merge remote-tracking branch 'vhost/linux-next'

Conflicts:
drivers/net/tun.c

Merge remote-tracking branch 'pinctrl/for-next'

Merge remote-tracking branch 'writeback/writeback-for-next'

Merge remote-tracking branch 'tmem/linux-next'

Merge remote-tracking branch 'char-misc/char-misc-next'

Merge remote-tracking branch 'staging/staging-next'

Conflicts:
drivers/staging/ipack/devices/ipoctal.c
drivers/staging/omap-thermal/omap-thermal-common.c

Merge remote-tracking branch 'usb/usb-next'

Conflicts:
drivers/usb/serial/digi_acceleport.c
drivers/usb/serial/io_ti.c
drivers/usb/serial/kl5kusb105.c
drivers/usb/serial/mos7720.c
drivers/usb/serial/mos7840.c

Merge remote-tracking branch 'tty/tty-next'

Merge remote-tracking branch 'driver-core/driver-core-next'

Merge remote-tracking branch 'leds/for-next'

Merge remote-tracking branch 'regmap/for-next'

Merge remote-tracking branch 'drivers-x86/linux-next'

Merge remote-tracking branch 'workqueues/for-next'

Conflicts:
drivers/hid/hid-picolcd.c
drivers/isdn/mISDN/hwchannel.c
drivers/video/omap2/displays/panel-taal.c

Merge remote-tracking branch 'xen-two/linux-next'

Merge remote-tracking branch 'kvm-ppc/kvm-ppc-next'

Merge remote-tracking branch 'kvm/linux-next'

Conflicts:
arch/s390/include/asm/processor.h
arch/x86/kvm/i8259.c

Merge remote-tracking branch 'kmemleak/kmemleak'

Merge remote-tracking branch 'rcu/rcu/next'

Conflicts:
arch/Kconfig
arch/x86/Kconfig
kernel/rcutree.h
kernel/rcutree_plugin.h
kernel/sched/core.c

Merge remote-tracking branch 'tip/auto-latest'

Conflicts:
arch/Kconfig
arch/s390/Kconfig

Merge remote-tracking branch 'spi-mb/spi-next'

Conflicts:
drivers/mmc/host/mxs-mmc.c

Merge remote-tracking branch 'dt-rh/for-next'

Merge remote-tracking branch 'edac-amd/for-next'

Conflicts:
Documentation/edac.txt
drivers/edac/amd64_edac.c

Merge remote-tracking branch 'edac/linux_next'

Merge remote-tracking branch 'fsnotify/for-next'

Conflicts:
kernel/audit_tree.c

Merge remote-tracking branch 'apm/for-next'

Merge remote-tracking branch 'pm/linux-next'

Merge remote-tracking branch 'trivial/for-next'

Conflicts:
drivers/scsi/ipr.c
drivers/video/backlight/88pm860x_bl.c

Merge remote-tracking branch 'osd/linux-next'

Merge remote-tracking branch 'iommu/next'

Merge remote-tracking branch 'watchdog/master'

Merge remote-tracking branch 'selinux/master'

Merge remote-tracking branch 'security/next'

Merge remote-tracking branch 'regulator/for-next'

Conflicts:
Documentation/devicetree/bindings/regulator/tps6586x.txt

Merge remote-tracking branch 'omap_dss2/for-next'

Merge remote-tracking branch 'fbdev/fbdev-next'

Merge remote-tracking branch 'battery/master'

Merge remote-tracking branch 'mfd/for-next'

Conflicts:
Documentation/devicetree/bindings/regulator/tps6586x.txt
drivers/mfd/88pm860x-core.c
drivers/mfd/tc3589x.c
drivers/regulator/anatop-regulator.c

Merge remote-tracking branch 'md/for-next'

Merge remote-tracking branch 'slab/for-next'

Merge remote-tracking branch 'kgdb/kgdb-next'

Merge remote-tracking branch 'mmc/mmc-next'

Merge branch 'quilt/device-mapper'

Merge remote-tracking branch 'block/for-next'

Merge remote-tracking branch 'cgroup/for-next'

Merge remote-tracking branch 'input-mt/for-next'

Merge remote-tracking branch 'input/next'

Merge branch 'quilt/rr'

Conflicts:
arch/alpha/Kconfig
arch/mips/kernel/module.c
arch/s390/Kconfig
arch/xtensa/Kconfig

Merge remote-tracking branch 'sound-asoc/for-next'

Conflicts:
arch/arm/mach-imx/mach-imx27_visstrim_m10.c

Merge remote-tracking branch 'sound/for-next'

Merge remote-tracking branch 'drm/drm-next'

Conflicts:
drivers/gpu/drm/i915/i915_dma.c

Merge remote-tracking branch 'crypto/master'

Conflicts:
crypto/Kconfig

Merge remote-tracking branch 'l2-mtd/master'

Merge remote-tracking branch 'mtd/master'

Merge remote-tracking branch 'bluetooth/master'

Merge remote-tracking branch 'net-next/master'

Conflicts:
net/socket.c

Merge remote-tracking branch 'slave-dma/next'