Marc Dietrich [Tue, 20 Jan 2015 22:01:28 +0000 (23:01 +0100)]
staging: nvec: specify a platform-device base id
commit 6e3f62f079 (mfd: core: Fix platform-device id generation) modified
the computation of the mfd cell id. Negative numbers forbit the specification
of cell ids as we do. Fix this for now by specifying a base of 0 instead. In
the long run, this may be changed to automatic cell ids (base -2).
Reported-by: Misha Komarovskiy <zombah@gmail.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Merge tag 'iio-for-3.20a_take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
Jonathan writes:
First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2
Updated pull request with Daniel's fix on top for the power management
Kconfig changes that had snuck in since last update of the IIO tree
worked it's way through from mainline.
Original pull message
New device support
* jsa1212 proxmity / ambient light sensor
* SM08500 supported added to the kxcjk-1013 accelerometer driver
* KMX61 Accelerometer/Magnetometer. This took a somewhat rocky path
being first merged, then reverted for a rewrite after a discussion of
how to support additional functionality and finally being merged prior
to some last reviews coming in, with resultant follow up patches.
* Freescale mma9551l driver (minor follow up warning supression patch).
* Semtech SX9500 proximity device driver.
* ak8975 gains support for ak09911 and ak09912 and drop the standalone driver
for the ak09911.
New functionality
* Dummy driver gains some virtual registers making it more flexible.
* IIO_ACTIVITY channel types, with modifiers running, walking etc. This is
to support on chip motion clasifiers. As such it is in the form of a
confidence percentage. The only devices so far only do binary decisions
but this gives us room when other devices give more nuanced clasification.
* IIO_EV_DIR_NONE type for events where there is no obvious direction.
First case is step detection.
* IIO_STEPS channel type for pedometers.
* ENABLE mask element used to control turning on counting types such as
the pedometer that need a 'start point'.
* INSTANCE event type to support things that happen once.
* info element for height calibration (used in various motion estimation
algorithms). Note heigh tof use
* dummy driver demonstration of the use of all the new bits above.
* event monitor support for the new events.
* inv_mpu6050 gains an i2c mux to allow bypassing the device to access
additional devices connected on the other side of it. Note that in
Windows these are handled by firmware on the device and not exposed
directly.
* inv_mpu6050 gains ACPI enumeration.
* inkern interface gains iio_write_channel_raw to allow in kernel users
of DAC functionality via a simple wrapper.
* Document input current readings in the ABI docs.
* Add an error message when we get an out of range error in device tree
processing for the in kernel interfaces. Basically a device tree debugging
aid.
* Add a sanity check that a scan index for a channel is unique during
registration. There to help catch bugs as this should never happen
in a bug free driver.
Cleanups and fixlets
A rework of buffer registration from Lars - a precursor to some other
upcoming new stuff (a few patches from others rolled in here as well).
* Ensure all drivers register the same channels for the device and buffer.
* Move buffer registration into the core rather than using the old
two step approach. Now we have simple ways of using a unified set channels
for both without requiring channels be exposed by both interface, this
removes a fair bit of boilerplate.
* Stop sca3000 and ad5933 (both in staging) enabling buffer channels by
default. It has long be convention in IIO to startup with no channels
enabled and leave it up to userspace to say what goes in the buffer.
Getting rid of these allows us to drop export of iio_scan_mask_set.
* Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used
for a while.
* Allocate standard buffer attributes in the core rather than in every
driver with a buffer.
* Make the length attribute read only when a driver is not able to set
the length.
* Drop the get_length callback for buffers as it is already available in
struct iio_buffer.
* Drop an unused arguement form iio_kfifo_allocate and add devm allocator
for it.
* some kconfig entries gain anotation with the resulting module name.
* Fix a resulting compile issue in dummy driver due to a stub taking
wrong parameters as a result of the above rework.
* Fix an off by 2 error in copying the core assigned buffer attributes.
Other cleanups,
* Trivial space before comma fixups.
* ak8975 fixlets - none critical. Rework to allow more device support.
* Drop unnecessary sizeof(u8) calls.
* bmp280 - refactor the compensation code to reduce copy operations and
code length. A second patch futher optimized this and performed some
other minor cleanups.
* kxcjk-1013 - various power control cleanups to avoid unnecessary enable
/ disable of device. Make sure it is only controlled at all if CONFIG_PM
is enabled. Also som cleanups of error paths.
* Small cleanups in adf4530 driver - pointless message and unnecessary braces.
* Clarifiy the proximity ABI docs to make it clear it should get bigger
as we move futher away.
* Drop a misleading comment form industrialio-core.c
* Trivial white space cleanups.
* sca3000 looses an unused debug function.
* Fix char unsigned ordering in ad8366
* Increase the sleep time in ad9523 to make it predictable (value didn't
really matter so make it more than 20 msecs)
* mxs-lradc touchscreen property cleanups in device tree are fixed to ensure
the meet all the 'interesting' documentation.
* A couple of cleanups for the staging ad5933 driver to avoid unnecessary
conversion to a processed temperature vlaue in kernel and remove
platform data form the state structure as not needed after probe.
* Fix a wrong scale factor in the docs.
Misc
* Add IIO include files to the maintainers entry.
Daniel Baluta [Fri, 9 Jan 2015 09:39:30 +0000 (11:39 +0200)]
iio kmx61 / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/iio/imu/kmx61.c
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Torvalds [Sun, 18 Jan 2015 06:00:40 +0000 (18:00 +1200)]
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We've been sitting on our fixes branch for a while, so this batch is
unfortunately on the large side.
A lot of these are tweaks and fixes to device trees, fixing various
bugs around clocks, reg ranges, etc. There's also a few defconfig
updates (which are on the late side, no more of those).
All in all the diffstat is bigger than ideal at this time, but nothing
in here seems particularly risky"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
reset: sunxi: fix spinlock initialization
ARM: dts: disable CCI on exynos5420 based arndale-octa
drivers: bus: check cci device tree node status
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
ARM: nomadik: fix up leftover device tree pins
ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
ARM: at91/dt: sam9263: Add missing clocks to lcdc node
ARM: at91: sama5d3: dt: correct the sound route
ARM: at91/dt: sama5d4: fix the timer reg length
ARM: exynos_defconfig: Enable LM90 driver
ARM: exynos_defconfig: Enable options for display panel support
arm: dts: Use pmu_system_controller phandle for dp phy
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: dts: berlin: correct BG2Q's SM GPIO location.
ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
...
Linus Torvalds [Sun, 18 Jan 2015 03:29:11 +0000 (15:29 +1200)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clock driver fixes from Mike Turquette:
"Small number of fixes for clock drivers and a single null pointer
dereference fix in the framework core code.
The driver fixes vary from fixing section mismatch warnings to
preventing machines from hanging (and preventing developers from
crying)"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
clk: fix possible null pointer dereference
Revert "clk: ppc-corenet: Fix Section mismatch warning"
clk: rockchip: fix deadlock possibility in cpuclk
clk: berlin: bg2q: remove non-exist "smemc" gate clock
clk: at91: keep slow clk enabled to prevent system hang
clk: rockchip: fix rk3288 cpuclk core dividers
clk: rockchip: fix rk3066 pll lock bit location
clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
Linus Torvalds [Sun, 18 Jan 2015 03:26:52 +0000 (15:26 +1200)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is one fix for a Multiqueue sleeping in invalid context problem
and a MAINTAINER file update for Qlogic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ->queue_rq can't sleep
MAINTAINERS: Update maintainer list for qla4xxx
Fabian Holler [Wed, 7 Jan 2015 09:39:54 +0000 (10:39 +0100)]
staging: android: remove space after casts
This patch fixes the following checkpatch.pl warnings:
ashmem.c:753: CHECK:SPACING: No space is necessary after a cast
ashmem.c:756: CHECK:SPACING: No space is necessary after a cast
ashmem.c:777: CHECK:SPACING: No space is necessary after a cast
Fabian Holler [Wed, 7 Jan 2015 09:39:53 +0000 (10:39 +0100)]
staging: android: remove blank lines after open braces
This patch fixes the following checkpatch.pl warnings:
ashmem.c:552: CHECK:BRACES: Blank lines aren't necessary after an open brace '{'
ashmem.c:801: CHECK:BRACES: Blank lines aren't necessary after an open brace
Steve Pennington [Wed, 24 Dec 2014 15:33:02 +0000 (09:33 -0600)]
Staging: android: fix line length coding style issue in sync_debug.c
This is a patch to sync_debug.c that fixes an over 80 character warning found by the checkpatch.pl tool Signed-off-by: Steve Pennington <sgpenn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tsung-Han Lin [Wed, 17 Dec 2014 18:33:24 +0000 (02:33 +0800)]
staging:board: remove unnecessary function
Remove the unnecessary 'of_can_translate_address',
which is already removed in commit d9c6866be8a145e32da616d8dcbae806032d75b5 ("of: kill off
of_can_translate_address").
Signed-off-by: Tsung-Han Lin <tsunghan.tw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The virtpci bus driver still uses the legacy suspend/resume callbacks. In
their current implementation these callbacks only contain a macro that
always expands to 'do { } while(0)'. So instead of converting them to dev PM
ops just remove them.
staging: ion: always initialize the free list parameters
Currently we initialize the heap free_lock and free list size in
ion_heap_init_deferred_free, which is only called when the
ION_HEAP_FLAG_DEFER_FREE heap flag is given. However, the lock and size
are used in the shrinker path as well as the deferred free path, and we
can register a shrinker *without* enabling deferred freeing. So, if a
heap provides a shrinker but *doesn't* set the DEFER_FREE flag we will
use these parameters uninitialized (resulting in a spinlock bug and
broken shrinker accounting).
Fix these problems by initializing the free list parameters directly in
ion_device_add_heap, which is always called no matter which heap
features are being used.
Eduardo Barretto [Sat, 20 Dec 2014 01:34:33 +0000 (23:34 -0200)]
Staging: wlan-ng: hfa384x_usb: fixed an 'else' statement coding style issue
Removed useless 'else' statement that followed an 'if' statement that
had a return 1 and moved all the content from the 'else' to outside of
the switch case, this way if any case is sufficient it returns '1',
otherwise it will return 0.
Robert Kmiec [Sun, 4 Jan 2015 00:32:07 +0000 (01:32 +0100)]
staging: rts5208/ms.c: Code style fix (space before comma)
This commit fixes the following errors reported by checkpatch.pl -f:
./rts5208/ms.c:1294: ERROR: space prohibited before that ',' (ctx:WxW)
./rts5208/ms.c:1345: ERROR: space prohibited before that ',' (ctx:WxW)
./rts5208/ms.c:1622: ERROR: space prohibited before that ',' (ctx:WxW)
./rts5208/ms.c:1991: ERROR: space prohibited before that ',' (ctx:WxW)
This patch also adds missing spaces before and after '+' sign in two places.
This file has some other style issues and they will be fixed with latter
patches.
Signed-off-by: Robert Kmiec <robert.r.kmiec@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Soren Brinkmann [Mon, 5 Jan 2015 17:21:29 +0000 (09:21 -0800)]
staging: clocking-wizard: Handle invalid clk in notifier
Even though it should never happen, handle the case that the clock
notifier is called with an unexpected clock handle. This avoids the
compiler warning:
drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c: In function 'clk_wzrd_clk_notifier':
>> drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c:99:6: warning: 'max' may be used uninitialized in this function [-Wmaybe-uninitialized]
if (ndata->new_rate > max)
^
Dan Carpenter [Tue, 6 Jan 2015 09:57:08 +0000 (12:57 +0300)]
staging: lustre: potential underflow in mdc_iocontrol()
Smatch complains that "data->ioc_plen2" is a user controlled value and,
since we cast to signed int, the limit check can underflow. It's not
very serious because probably the copy_to_user() would return -EFAULT
on every arch that matters instead of creating an info leak. Also I
haven't followed it through to see if the value is really user
controlled.
But definitely it would be safer to cast to unsigned so let's do that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: libcfs: fix sparse warnings about static declaration
Fixes the following sparse warnings:
drivers/staging/lustre/lustre/libcfs/linux/linux-prim.c:198:1: warning:
symbol 'libcfs_arch_init' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/linux/linux-prim.c:204:1: warning:
symbol 'libcfs_arch_cleanup' was not declared. Should it be static?
Fix the sparse warning about a context imbalance in the
srpc_service_recycle_buffer function by telling sparse that it
should expect the lock to be held on entry and held on exit.
drivers/staging/lustre/lnet/selftest/rpc.c:725:20: warning: context imbalance in 'srpc_service_recycle_buffer' - unexpected unlock
Fix the sparse warning about a context imbalance in the
srpc_service_post_buffer function by telling sparse that it
should expect the lock to be held on entry and held on exit.
drivers/staging/lustre/lnet/selftest/rpc.c:508:17: warning: context imbalance in 'srpc_service_post_buffer' - unexpected unlock
Fix the sparse warning about a context imbalance in the
sfw_deactivate_session function by telling sparse that it
should expect the lock to be held on entry and held on exit.
drivers/staging/lustre/lnet/selftest/framework.c:210:9: warning: context imbalance in 'sfw_deactivate_session' - unexpected unlock
This fixes sparse warnings:
staging/lustre/lustre/libcfs/nidstrings.c:200:11: warning: symbol 'libcfs_nnetstrfns' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:203:1: warning: symbol 'libcfs_lo_str2addr' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:210:1: warning: symbol 'libcfs_ip_addr2str' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:227:1: warning: symbol 'libcfs_ip_str2addr' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:248:1: warning: symbol 'libcfs_decnum_addr2str' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:254:1: warning: symbol 'libcfs_hexnum_addr2str' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:260:1: warning: symbol 'libcfs_num_str2addr' was not declared. Should it be static?
staging/lustre/lustre/libcfs/nidstrings.c:279:18: warning: symbol 'libcfs_lnd2netstrfns' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:292:18: warning: symbol 'libcfs_namenum2netstrfns' was not declared. Should it be static?
drivers/staging/lustre/lustre/libcfs/nidstrings.c:307:18: warning: symbol 'libcfs_name2netstrfns' was not declared. Should it be static?
Some functions had static forward declarations followed by non-static
implementations. Those forward declarations are removed and the
implementations are declared static and moved into a location that
doesn't require forward declarations.
Jeremiah Mahler [Fri, 26 Dec 2014 00:04:44 +0000 (16:04 -0800)]
staging: lustre: replace MIN with min, cast (__kernel_size_t)
Switch from MIN to min and fix the new type warning. The
warning is produced because a comparison between iov_len,
which is a __kernel_size_t, is made to kiov_len, which is an
unsigned int (include/linux/lnet/types.h). Fix the warning
by casting kiov_len to __kernel_size_t.
Jeremiah Mahler [Fri, 26 Dec 2014 00:04:43 +0000 (16:04 -0800)]
staging: lustre: replace MIN/MAX with min_t/max_t
Switch from MIN/MAX to min_t/max_t with a size_t type. The size_t type
was chosen because one operand is a size_t and all the others are
immediate integer values.
Jeremiah Mahler [Fri, 26 Dec 2014 00:04:41 +0000 (16:04 -0800)]
staging: lustre: use min/max instead of MIN/MAX, simple cases
Custom MIN/MAX operations are being used which are not as robust
as the built in min/max operations which will warn about potentially
problematic type comparisons.
For the simple cases, where no type warning is produced, simply
replace MIN/MAX with min/max.
Dan Carpenter [Mon, 22 Dec 2014 07:52:39 +0000 (10:52 +0300)]
Staging: lustre: error handling tweaks in obd_ioctl_getdata()
1) The places which called copy_from_user() were returning the number
of bytes not copied instead of -EFAULT.
2) The user could trigger a memory leak if the condition
"(hdr.ioc_len != data->ioc_len)" was true. Instead of adding a new call
to OBD_FREE_LARGE(), I created a free_buf label and changed everything
to use that label.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer Baugh [Sat, 20 Dec 2014 20:48:13 +0000 (15:48 -0500)]
lustre: ptlrpc: add "ptlrpc_internal.h" to sec_gc.c
ptlrpc_internal.h contains the prototypes for sptlrpc_gc_init() and
sptlrpc_gc_fini(), which are defined in sec_gc.c.
This removes the following sparse warnings:
drivers/staging/lustre/lustre/ptlrpc/sec_gc.c:217:5: warning: symbol 'sptlrpc_gc_init' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/sec_gc.c:241:6: warning: symbol 'sptlrpc_gc_fini' was not declared. Should it be static?
Chris Rorvick [Wed, 17 Dec 2014 04:24:02 +0000 (22:24 -0600)]
drivers: staging: lustre: Track sign separately
The `mult' parameter is negated if the user data begins with a '-' so
that the final value has the appropriate sign. But `mult' is only used
if the user data does not include a "units" suffix. In this case,
`mult' is overridden with the numeric scale conveyed by the units suffix,
but retains the sign of the original value.
Having `mult' serving double-duty works but is confusing. Use a new
local variable to store the sign of the user data instead. This also
fixes a pitfall of passing 0 to `mult', expecting it to be ignored when
a units suffix is specified, but having the effect of taking the
absolute value of the user-provided data.
Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Rorvick [Wed, 17 Dec 2014 04:24:01 +0000 (22:24 -0600)]
drivers: staging: lustre: Use mult if units not specified
Units can be passed to lprocfs_write_frac_u64_helper() via a suffix
(e.g., "...K", "...M", etc.) tacked onto the value. A comment states
that "specified units override the multiplier," though the multiplier is
overridden regardless. Update the conditional logic so that it only
applies when units are specified.
Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tristan Lelong [Sun, 7 Dec 2014 00:00:30 +0000 (16:00 -0800)]
staging: lustre: replace static value with define
This patch replace the value '80' used in several files in the lustre source code
with a define LUSTRE_MDT_MAXNAMELEN.
This value is used in 4 different structures as the maximum len for a service name.
According to the comments, these names follow a convention which make it possible
to use the same define for LCS, LSS, LCF, and LSF.
Tristan Lelong [Sat, 6 Dec 2014 06:43:20 +0000 (22:43 -0800)]
staging: lustre: fix sparse warning on LPROC_SEQ_FOPS macros
This patch fix a sparse warning in lustre sources
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:1>*to
got char *<noident>
This is done by adding the missing __user attribute on userland pointers inside the LPROC_SEQ_FOPS like macros:
- LPROC_SEQ_FOPS
- LPROC_SEQ_FOPS_RW_TYPE
- LPROC_SEQ_FOPS_WR_ONLY
- LDLM_POOL_PROC_WRITER
The patch also updates all the functions that are used by this macro:
- lprocfs_wr_*
- *_seq_write
as well as some helpers used by the previously modified functions (otherwise fixing the sparse warning add some new ones):
- lprocfs_write_frac_helper
- lprocfs_write_helper
- lprocfs_write_u64_helper
The patch also fixes one __user pointer direct dereference by strncmp in function fld_proc_hash_seq_write.
projects / linux-beck.git / log