]> git.karo-electronics.de Git - linux-beck.git/log
linux-beck.git
8 years agostaging/lustre/llite: correct request handling after ll_lookup_it()
John L. Hammond [Mon, 20 Jun 2016 20:55:25 +0000 (16:55 -0400)]
staging/lustre/llite: correct request handling after ll_lookup_it()

In the FIFO cases of ll_atomic_open() and ll_lookup_nd() remove
spurious calls to ptlrpc_req_finished(). Explain that these cases are
unreachable in practice anyway.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/17068
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7402
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/lustre/llite: allocate and free client cache asynchronously
Emoly Liu [Mon, 20 Jun 2016 20:55:24 +0000 (16:55 -0400)]
staging/lustre/llite: allocate and free client cache asynchronously

Since the inflight request holds import refcount as well as export,
sometimes obd_disconnect() in client_common_put_super() can't put
the last refcount of OSC import (e.g. due to network disconnection),
this will cause cl_cache being accessed after free.

To fix this issue, ccc_users is used as cl_cache refcount, and
lov/llite/osc all hold one cl_cache refcount respectively, to avoid
the race that a new OST is being added into the system when the client
is mounted.
The following cl_cache functions are added:
- cl_cache_init(): allocate and initialize cl_cache
- cl_cache_incref(): increase cl_cache refcount
- cl_cache_decref(): decrease cl_cache refcount and free the cache
  if refcount=0.

Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-on: http://review.whamcloud.com/13746
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6173
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: lustre: remove remote client support
Fan Yong [Mon, 20 Jun 2016 02:53:53 +0000 (22:53 -0400)]
staging: lustre: remove remote client support

There are several obsolete sub commands for lfs to work with
remote client. We do not support that anymore, and should be
deleted along with any kernel code related to remote client.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6971
Reviewed-on: http://review.whamcloud.com/19789
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoMerge 4.7-rc4 into staging-next
Greg Kroah-Hartman [Mon, 20 Jun 2016 15:25:44 +0000 (08:25 -0700)]
Merge 4.7-rc4 into staging-next

We want the fixes in here, and we can resolve a merge issue in
drivers/iio/industrialio-trigger.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoLinux 4.7-rc4
Linus Torvalds [Mon, 20 Jun 2016 04:30:02 +0000 (21:30 -0700)]
Linux 4.7-rc4

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Linus Torvalds [Sun, 19 Jun 2016 17:05:14 +0000 (07:05 -1000)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull UDF fixes and a reiserfs fix from Jan Kara:
 "A couple of udf fixes (most notably a bug in parsing UDF partitions
  which led to inability to mount recent Windows installation media) and
  a reiserfs fix for handling kstrdup failure"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: check kstrdup failure
  udf: Use correct partition reference number for metadata
  udf: Use IS_ERR when loading metadata mirror file entry
  udf: Don't BUG on missing metadata partition descriptor

8 years agoMerge tag 'dmaengine-fix-4.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Sun, 19 Jun 2016 16:52:20 +0000 (06:52 -1000)]
Merge tag 'dmaengine-fix-4.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
 "Some fixes has piled up, so time to send them upstream.

  These fixes include:
   - at_xdmac fixes for residue and other stuff
   - update MAINTAINERS for dma dt bindings
   - mv_xor fix for incorrect offset"

* tag 'dmaengine-fix-4.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mv_xor: Fix incorrect offset in dma_map_page()
  dmaengine: at_xdmac: double FIFO flush needed to compute residue
  dmaengine: at_xdmac: fix residue corruption
  dmaengine: at_xdmac: align descriptors on 64 bits
  MAINTAINERS: Add file patterns for dma device tree bindings

8 years agoMerge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Sun, 19 Jun 2016 06:36:17 +0000 (20:36 -1000)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Another batch of fixes for ARM SoC platforms.  Most are smaller fixes.

  Two areas that are worth pointing out are:

   - OMAP had a handful of changes to voltage specs that caused a bit of
     churn, most of volume of change in this branch is due to this.

   - There are a couple of _rcuidle fixes from Paul that touch common
     code and came in through the OMAP tree since they were the ones who
     saw the problems.

 The rest is smaller changes across a handful of platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
  ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  ARM: OMAP2+: timer: add probe for clocksources
  ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  arm: Use _rcuidle for smp_cross_call() tracepoints
  MAINTAINERS: Add myself as reviewer of ARM FSL/NXP
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
  ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
  ARM: imx6ul: Fix Micrel PHY mask
  ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  ARM: dts: DRA74x: fix DSS PLL2 addresses
  ARM: OMAP2: Enable Errata 430973 for OMAP3
  ARM: dts: socfpga: Add missing PHY phandle
  ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
  ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board
  ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator
  ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator
  ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile
  ...

8 years agoMerge tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux into fixes
Olof Johansson [Sun, 19 Jun 2016 05:59:07 +0000 (22:59 -0700)]
Merge tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux into fixes

OMAP-GPMC: Fixes for for v4.7-rc cycle:

- Fix omap gpmc EXTRADELAY timing. The DT provided timings
were wrongly used causing devices requiring extra delay timing
to fail.

* tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  + Linux 4.7-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>
8 years agoMerge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux...
Olof Johansson [Sun, 19 Jun 2016 05:57:48 +0000 (22:57 -0700)]
Merge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.7-rc cycle:

- Fix dra7 for hardware issues limiting L4Per and L3init power domains
  to on state. Without this the devices may not work correctly after
  some time of use because of asymmetric aging. And related to this,
  let's also remove the unusable states.

- Always select omap interconnect for am43x as otherwise the am43x
  only configurations will not boot properly. This can happen easily
  for any product kernels that leave out other SoCs to save memory.

- Fix DSS PLL2 addresses that have gone unused for now

- Select erratum 430973 for omap3, this is now safe to do and can
  save quite a bit of debugging time for people who may have left
  it out.

* tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
  ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
  ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  ARM: dts: DRA74x: fix DSS PLL2 addresses
  ARM: OMAP2: Enable Errata 430973 for OMAP3
  + Linux 4.7-rc2

Signed-off-by: Olof Johansson <olof@lixom.net>
8 years agoMerge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Sun, 19 Jun 2016 05:21:52 +0000 (22:21 -0700)]
Merge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.7-rc cycle:

- Two boot warning fixes from the RCU tree that should have gotten
  merged several weeks ago already but did not because of issues
  with who merges them. Paul has now split the RCU warning fixes into
  sets for various maintainers.

- Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes

- Fix PM for omap3 boards using timer12 and gptimer, like the
  original beagleboard

- Fix hangs on am437x-sk-evm by lowering the I2C bus speed

* tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  ARM: OMAP2+: timer: add probe for clocksources
  ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
  arm: Use _rcuidle for smp_cross_call() tracepoints
  arm: Use _rcuidle tracepoint to allow use from idle

Signed-off-by: Olof Johansson <olof@lixom.net>
8 years agoARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
Lee Jones [Fri, 17 Jun 2016 11:44:18 +0000 (13:44 +0200)]
ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes

This patch fixes a non-booting issue in Mainline.

When booting with a compressed kernel, we need to be careful how we
populate memory close to DDR start.  AUTO_ZRELADDR is enabled by default
in multi-arch enabled configurations, which place some restrictions on
where the kernel is placed and where it will be uncompressed to on boot.

AUTO_ZRELADDR takes the decompressor code's start address and masks out
the bottom 28 bits to obtain an address to uncompress the kernel to
(thus a load address of 0x42000000 means that the kernel will be
uncompressed to 0x40000000 i.e. DDR START on this platform).

Even changing the load address to after the co-processor's shared memory
won't render a booting platform, since the AUTO_ZRELADDR algorithm still
ensures the kernel is uncompressed into memory shared with the first
co-processor (0x40000000).

Another option would be to move loading to 0x4A000000, since this will
mean the decompressor will decompress the kernel to 0x48000000. However,
this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of
memory would essentially be wasted for no good reason.

Until we can work with ST to find a suitable memory location to
relocate co-processor shared memory, let's disable the shared memory
nodes.  This will ensure a working platform in the mean time.

NB: The more observant of you will notice that we're leaving the DMU
shared memory node enabled; this is because a) it is the only one in
active use at the time of this writing and b) it is not affected by
the current default behaviour which is causing issues.

Fixes: fe135c6 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
8 years agoMerge tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo...
Olof Johansson [Sun, 19 Jun 2016 05:18:45 +0000 (22:18 -0700)]
Merge tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

The i.MX fixes for 4.7:
 - Correct Micrel PHY mask to fix the issue that i.MX6UL ethernet works
   in U-Boot but not in kernel.

* tag 'imx-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx6ul: Fix Micrel PHY mask

Signed-off-by: Olof Johansson <olof@lixom.net>
8 years agostaging/lustre: Update FID documentation link.
Oleg Drokin [Sun, 19 Jun 2016 03:53:13 +0000 (23:53 -0400)]
staging/lustre: Update FID documentation link.

When OpenSFS took over lustre.org, there was some reshuffling.
FIDs on ZFS document is now at
http://wiki.old.lustre.org/index.php/Architecture_-_Interoperability_fids_zfs
instead of the old location, so update comments accordingly.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/lustre: Remove unnecessary space after a cast
Oleg Drokin [Sun, 19 Jun 2016 03:53:12 +0000 (23:53 -0400)]
staging/lustre: Remove unnecessary space after a cast

This patch fixes all checkpatch occurences of
"CHECK: No space is necessary after a cast"
in Lustre code.

Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/lustre: Keep logical continuations on the previous line
Emoly Liu [Sun, 19 Jun 2016 03:53:11 +0000 (23:53 -0400)]
staging/lustre: Keep logical continuations on the previous line

This patch fixes all checkpatch occurences of
"CHECK: Logical continuations should be on the previous line"
in Lustre code.

Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/lustre: Fix blank line before EXPORT_SYMBOL()
Emoly Liu [Sun, 19 Jun 2016 03:53:10 +0000 (23:53 -0400)]
staging/lustre: Fix blank line before EXPORT_SYMBOL()

This patch fixes one checkpatch warning in lustre:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable

Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agortl8192u: Remove unused semaphore rf_sem
Binoy Jayan [Thu, 2 Jun 2016 10:53:02 +0000 (16:23 +0530)]
rtl8192u: Remove unused semaphore rf_sem

The semaphore 'rf_sem' in rtl8192u has no users, hence removing it.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agortl8192u: Replace semaphore scan_sem with mutex
Binoy Jayan [Thu, 2 Jun 2016 10:53:01 +0000 (16:23 +0530)]
rtl8192u: Replace semaphore scan_sem with mutex

The semaphore 'scan_sem' in rtl8192u is a simple mutex, so it should
be written as one. Semaphores are going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agortl8192u: ieee80211_device: Replace semaphore wx_sem with mutex
Binoy Jayan [Thu, 2 Jun 2016 10:53:00 +0000 (16:23 +0530)]
rtl8192u: ieee80211_device: Replace semaphore wx_sem with mutex

The semaphore 'wx_sem' in ieee80211_device is a simple mutex,
so it should be written as one. Semaphores are going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agortl8192u: r8192_priv: Replace semaphore wx_sem with mutex
Binoy Jayan [Thu, 2 Jun 2016 10:52:59 +0000 (16:22 +0530)]
rtl8192u: r8192_priv: Replace semaphore wx_sem with mutex

The semaphore 'wx_sem' in r8192_priv is a simple mutex, so
it should be written as one. Semaphores are going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: propagate errors in write_nic_dword
Salah Triki [Wed, 4 May 2016 03:42:48 +0000 (04:42 +0100)]
staging: rtl8192u: propagate errors in write_nic_dword

Propagate errors from kzalloc and usb_control_msg and change the
return type of write_nic_dword from void to int.

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: propagate errors in write_nic_word
Salah Triki [Wed, 4 May 2016 03:42:47 +0000 (04:42 +0100)]
staging: rtl8192u: propagate errors in write_nic_word

Propagate errors from kzalloc and usb_control_msg and change the
return type of write_nic_word from void to int.

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: propagate errors in write_nic_byte_E
Salah Triki [Wed, 4 May 2016 03:42:46 +0000 (04:42 +0100)]
staging: rtl8192u: propagate errors in write_nic_byte_E

Propagate errors from  kzalloc and usb_control_msg and change the
return type of write_nic_byte_E from void to int.

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: propagate errors in write_nic_byte
Salah Triki [Wed, 4 May 2016 03:42:45 +0000 (04:42 +0100)]
staging: rtl8192u: propagate errors in write_nic_byte

Propagate errors from  kzalloc and usb_control_msg and change the
return type of write_nic_byte from void to int.

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: check return value of rtl8192_read_eeprom_info
Salah Triki [Wed, 4 May 2016 03:42:44 +0000 (04:42 +0100)]
staging: rtl8192u: check return value of rtl8192_read_eeprom_info

The call of rtl8192_read_eeprom_info may fail, therefore its return
value must be checked and propagated in the case of error

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: propagate errors in rtl8192_read_eeprom_info
Salah Triki [Wed, 4 May 2016 03:42:43 +0000 (04:42 +0100)]
staging: rtl8192u: propagate errors in rtl8192_read_eeprom_info

Propagate error from eprom_read and change the return type of
rtl8192_read_eeprom_info from void to int.

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: check return value eprom_read
Salah Triki [Wed, 4 May 2016 03:42:42 +0000 (04:42 +0100)]
staging: rtl8192u: check return value eprom_read

The call of eprom_read may fail, therefore its return value must be
checked

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: propagate errors in eprom_read
Salah Triki [Wed, 4 May 2016 03:42:41 +0000 (04:42 +0100)]
staging: rtl8192u: propagate errors in eprom_read

Propagate error from eprom_r and change the return type of eprom_read
from u32 to int.

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: rtl8192u: check return value of read_nic_word_E
Salah Triki [Wed, 4 May 2016 03:42:40 +0000 (04:42 +0100)]
staging: rtl8192u: check return value of read_nic_word_E

The call of read_nic_word_E may fail, therefore its return value must be
checked and propagated in the case of error.

Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: remove bogus NULL checks
Dan Carpenter [Tue, 14 Jun 2016 11:17:02 +0000 (14:17 +0300)]
staging: ks7010: remove bogus NULL checks

enc->rx_seq[] and enc->key[] are arrays, not pointers and they can't be
NULL.  Let's remove these NULL checks.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: drop private handler for driver version
Wolfram Sang [Fri, 17 Jun 2016 08:47:00 +0000 (10:47 +0200)]
staging: ks7010: drop private handler for driver version

We are upstream now, we don't need seperate driver versioning.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: report interface as wlan not eth
Wolfram Sang [Fri, 17 Jun 2016 08:46:59 +0000 (10:46 +0200)]
staging: ks7010: report interface as wlan not eth

Until we switch to cfg80211 (if ever), we must do this manually.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: bail out when registering netdevice fails
Wolfram Sang [Fri, 17 Jun 2016 08:46:58 +0000 (10:46 +0200)]
staging: ks7010: bail out when registering netdevice fails

There is no need to continue then. Also, this enables us to remove an
ugly static variable.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: sdio: remove forward declarations
Wolfram Sang [Fri, 17 Jun 2016 08:46:57 +0000 (10:46 +0200)]
staging: ks7010: sdio: remove forward declarations

Move read/write functions to the top and driver struct to the end, so we
can remove all forward declarations.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: unify naming to ks7010
Wolfram Sang [Fri, 17 Jun 2016 08:46:56 +0000 (10:46 +0200)]
staging: ks7010: unify naming to ks7010

No 79xx anymore, this is confusing. Add a comment saying that old
versions were probably named 7910/79xx.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: export sdio ids
Wolfram Sang [Fri, 17 Jun 2016 08:46:55 +0000 (10:46 +0200)]
staging: ks7010: export sdio ids

So the module will be loaded automatically on card insertion. Rename the
array while here.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: collect all includes and sort them
Wolfram Sang [Fri, 17 Jun 2016 08:46:54 +0000 (10:46 +0200)]
staging: ks7010: collect all includes and sort them

Includes probably need a driver-wide clean up, but for now let's at
least group all includes from the sdio file together.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: function declaration should be in a header file
Wolfram Sang [Fri, 17 Jun 2016 08:46:53 +0000 (10:46 +0200)]
staging: ks7010: function declaration should be in a header file

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: ks7010: remove cfg file handling
Wolfram Sang [Fri, 17 Jun 2016 08:46:52 +0000 (10:46 +0200)]
staging: ks7010: remove cfg file handling

I verified that all but two settings from the config file can be set up
also via 'iwconfig' or 'iwpriv'. The two missing are ROM_FILE and
PhyInformationTimer. ROM_FILE can be easily dropped. There is only one
known firmware floating on the net, so, the name is fix and we can make
this constant. Frankly, I don't know when PhyInformationTimer needs to
be set to non-zero. But if we need it somewhen, there is already
(currently commented out) code to add this as another private method, so
we could use that. Summa summarum: We can remove the config file
handling and the example config file. The only useful action,
initialization of the configuration struct, is now moved to the sdio
main file.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoMerge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Linus Torvalds [Sun, 19 Jun 2016 01:20:15 +0000 (15:20 -1000)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A couple of fixes for pmd_mknotpresent()/pmd_present() for LPAE
  systems"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8579/1: mm: Fix definition of pmd_mknotpresent
  ARM: 8578/1: mm: ensure pmd_present only checks the valid bit

8 years agoMerge tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sat, 18 Jun 2016 16:06:49 +0000 (06:06 -1000)]
Merge tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch (65) of USB fixes for 4.7-rc4.  Sorry about the
  quantity, I've been slow in getting these out.

  The majority are the "normal" gadget, musb, and xhci fixes, that we
  all are used to.  There are also a few other tiny fixes resolving a
  number of reported issues that showed up in 4.7-rc1.

  All of these have been in linux-next"

* tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
  usbip: rate limit get_frame_number message
  usb: musb: sunxi: Remove bogus "Frees glue" comment
  usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb
  usb: echi-hcd: Add ehci_setup check before echi_shutdown
  usb: host: ehci-msm: Conditionally call ehci suspend/resume
  MAINTAINERS: Add file patterns for usb device tree bindings
  usb: host: ehci-tegra: Avoid getting the same reset twice
  usb: host: ehci-tegra: Grab the correct UTMI pads reset
  USB: mos7720: delete parport
  USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails
  phy: ti-pipe3: Program the DPLL even if it was already locked
  usb: musb: Stop bulk endpoint while queue is rotated
  usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
  usb: musb: host: correct cppi dma channel for isoch transfer
  usb: musb: only restore devctl when session was set in backup
  usb: phy: Check initial state for twl6030
  usb: musb: Use normal module_init for 2430 glue
  usb: musb: Remove pm_runtime_set_irq_safe
  usb: musb: Remove extra PM runtime calls from 2430 glue layer
  usb: musb: Return error value from musb_mailbox
  ...

8 years agoMerge tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 18 Jun 2016 16:05:28 +0000 (06:05 -1000)]
Merge tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull IIO and staging fixes from Greg KH:
 "Here are a number of IIO and staging bugfixes for 4.7-rc4.

  Nothing huge, the normal amount of iio driver fixes, and some small
  staging driver bugfixes for some reported problems (2 are reverts of
  patches that went into 4.7-rc1).  All have been in linux-next with no
  reported issues"

* tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits)
  Revert "Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type."
  Revert "Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)"
  staging: lustre: lnet: Don't access NULL NI on failure path
  iio: hudmidity: hdc100x: fix incorrect shifting and scaling
  iio: light apds9960: Add the missing dev.parent
  iio: Fix error handling in iio_trigger_attach_poll_func
  iio: st_sensors: Disable DRDY at init time
  iio: st_sensors: Init trigger before irq request
  iio: st_sensors: switch to a threaded interrupt
  iio: light: bh1780: assign a static name
  iio: bh1780: dereference the client properly
  iio: humidity: hdc100x: fix IIO_TEMP channel reporting
  iio:st_pressure: fix sampling gains (bring inline with ABI)
  iio: proximity: as3935: fix buffer stack trashing
  iio: proximity: as3935: remove triggered buffer processing
  iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output
  max44000: Remove scale from proximity
  iio: humidity: am2315: Remove a stray unlock
  iio: humidity: hdc100x: correct humidity integration time mask
  iio: pressure: bmp280: fix error message for wrong chip id
  ...

8 years agoMerge tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 18 Jun 2016 16:04:01 +0000 (06:04 -1000)]
Merge tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are a small number of debugfs, ISA, and one driver core fix for
  4.7-rc4.

  All of these resolve reported issues.  The ISA ones have spent the
  least amount of time in linux-next, sorry about that, I didn't realize
  they were regressions that needed to get in now (thanks to Thorsten
  for the prodding!) but they do all pass the 0-day bot tests.  The
  others have been in linux-next for a while now.

  Full details about them are in the shortlog below"

* tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  isa: Dummy isa_register_driver should return error code
  isa: Call isa_bus_init before dependent ISA bus drivers register
  watchdog: ebc-c384_wdt: Allow build for X86_64
  iio: stx104: Allow build for X86_64
  gpio: Allow PC/104 devices on X86_64
  isa: Allow ISA-style drivers on modern systems
  base: make module_create_drivers_dir race-free
  debugfs: open_proxy_open(): avoid double fops release
  debugfs: full_proxy_open(): free proxy on ->open() failure
  kernel/kcov: unproxify debugfs file's fops

8 years agoMerge tag 'char-misc-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 18 Jun 2016 16:02:37 +0000 (06:02 -1000)]
Merge tag 'char-misc-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a small number of char and misc driver fixes for 4.7-rc4.

  They resolve some minor issues that have been reported, and have all
  been in linux-next"

* tag 'char-misc-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: Handle build path error
  coresight: Fix erroneous memset in tmc_read_unprepare_etr
  coresight: Fix tmc_read_unprepare_etr
  coresight: Fix NULL pointer dereference in _coresight_build_path
  extcon: palmas: Fix boot up state of VBUS when using GPIO detection
  mcb: Acquire reference to carrier module in core
  mcb: Acquire reference to device in probe
  mei: don't use wake_up_interruptible for wr_ctrl

8 years agoMerge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason...
Linus Torvalds [Sat, 18 Jun 2016 15:57:59 +0000 (05:57 -1000)]
Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "The most user visible change here is a fix for our recent superblock
  validation checks that were causing problems on non-4k pagesized
  systems"

* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: btrfs_check_super_valid: Allow 4096 as stripesize
  btrfs: remove build fixup for qgroup_account_snapshot
  btrfs: use new error message helper in qgroup_account_snapshot
  btrfs: avoid blocking open_ctree from cleaner_kthread
  Btrfs: don't BUG_ON() in btrfs_orphan_add
  btrfs: account for non-CoW'd blocks in btrfs_abort_transaction
  Btrfs: check if extent buffer is aligned to sectorsize
  btrfs: Use correct format specifier

8 years agoMerge tag 'acpi-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Sat, 18 Jun 2016 06:22:37 +0000 (20:22 -1000)]
Merge tag 'acpi-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Revert a recent ACPICA commit that introduced a suspend-to-RAM
  regression on one system due to incorrect information in its ACPI
  tables that had not been taken into consideration at all before (and
  everything worked), but the commit in question started to use it"

* tag 'acpi-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()"

8 years agoMerge tag 'pm-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Sat, 18 Jun 2016 06:08:00 +0000 (20:08 -1000)]
Merge tag 'pm-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "Fixes for two recent regressions that may lead to degraded performance
  (operating performance points framework, intel_pstate).

  Specifics:

   - Fix a recent regression in the intel_pstate driver that may lead to
     degraded performance on some systems due to missing turbo state
     entry in the table returned by the ACPI _PSS object (Srinivas
     Pandruvada).

   - Fix a recent regression in the OPP (operating performance points)
     framework that may lead to degraded performance on some systems
     where the OPP table is created too early (Viresh Kumar)"

* tag 'pm-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_table
  cpufreq: intel_pstate: Adjust _PSS[0] freqeuency if needed

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Sat, 18 Jun 2016 05:27:12 +0000 (19:27 -1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID subsystem fixes from Jiri Kosina:

 - kernel panic fix in hid-elo from Oliver Neukum

 - Surface Pro 3 device quirk from Benjamin Tissoires

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: multitouch: Add MT_QUIRK_NOT_SEEN_MEANS_UP to Surface Pro 3
  HID: elo: kill not flush the work

8 years agostaging/android: sync_debug: unproxify debugfs files' fops
Nicolai Stange [Fri, 27 May 2016 18:03:54 +0000 (20:03 +0200)]
staging/android: sync_debug: unproxify debugfs files' fops

Since commit 49d200deaa68 ("debugfs: prevent access to removed files'
private data"), a debugfs file's file_operations methods get proxied
through lifetime aware wrappers.

However, only a certain subset of the file_operations members is supported
by debugfs and ->compat_ioctl isn't among them -- it appears to be NULL
from the VFS layer's perspective.

This behaviour breaks the /sys/kernel/debug/sync/sw_sync file introduced
concurrently with commit a44eb74cd413 ("staging/android: move SW_SYNC_USER
to a debugfs file").

Since that file never gets removed, there is no file removal race and thus,
a lifetime checking proxy isn't needed.

Avoid the proxying for /sys/kernel/debug/sync/sw_sync by creating it via
debugfs_create_file_unsafe() rather than debugfs_create_file().
For consistency, do the same for /sys/kernel/debug/sync/info.

Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data")
Fixes: a44eb74cd413 ("staging/android: move SW_SYNC_USER to a debugfs file")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: add DEBUG_FS dependence on Kconfig
Gustavo Padovan [Tue, 31 May 2016 19:59:13 +0000 (16:59 -0300)]
staging/android: add DEBUG_FS dependence on Kconfig

SW_SYNC only works with DEBUG_FS so state it in the Kconfig file.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: rename sync.h to sync_debug.h
Gustavo Padovan [Tue, 31 May 2016 19:59:12 +0000 (16:59 -0300)]
staging/android: rename sync.h to sync_debug.h

This header file only contains information for debugging and SW_SYNC, so
rename it to sync_debug.h instead of having a more generic name.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove drv_name from sync_timeline
Gustavo Padovan [Tue, 31 May 2016 19:59:11 +0000 (16:59 -0300)]
staging/android: remove drv_name from sync_timeline

As it is internal to sw_sync now this value will always be "sw_sync".

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove sync_timeline_destroy()
Gustavo Padovan [Tue, 31 May 2016 19:59:10 +0000 (16:59 -0300)]
staging/android: remove sync_timeline_destroy()

This function was just used by the file release function, so we just fold
its content there and remove sync_timeline_destroy().

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove 'destroyed' member from struct sync_timeline
Gustavo Padovan [Tue, 31 May 2016 19:59:09 +0000 (16:59 -0300)]
staging/android: remove 'destroyed' member from struct sync_timeline

'destroyed' was set but not used ny anyone.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: make sw_ioctl info internal to sw_sync.c
Gustavo Padovan [Tue, 31 May 2016 19:59:08 +0000 (16:59 -0300)]
staging/android: make sw_ioctl info internal to sw_sync.c

We don't want to export this from the kernel. This is interface is only
for testing and debug. So testers shall copy the ioctl info in their own
projects.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: make sync_timeline internal to sw_sync
Gustavo Padovan [Tue, 31 May 2016 19:59:07 +0000 (16:59 -0300)]
staging/android: make sync_timeline internal to sw_sync

The only use sync_timeline will have in upstream kernel is for debugging
through the SW_SYNC interface. So make it internal to SW_SYNC to avoid
people use it in the future.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: clean up #includes in the sync framework
Gustavo Padovan [Tue, 31 May 2016 19:59:06 +0000 (16:59 -0300)]
staging/android: clean up #includes in the sync framework

Most of the includes there are not necessary anymore.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: move sw_sync related code to sw_sync.c
Gustavo Padovan [Tue, 31 May 2016 19:59:05 +0000 (16:59 -0300)]
staging/android: move sw_sync related code to sw_sync.c

Split sync_debug and sw_sync in two different files.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: bring struct sync_pt back
Gustavo Padovan [Tue, 31 May 2016 19:59:04 +0000 (16:59 -0300)]
staging/android: bring struct sync_pt back

Move the list_head members from sync_pt to struct fence was a mistake,
they will not be used by struct fence as planned before, so here we create
sync_pt again to bring the list heads back.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove size arg of sync_timeline_create()
Gustavo Padovan [Tue, 31 May 2016 19:59:03 +0000 (16:59 -0300)]
staging/android: remove size arg of sync_timeline_create()

After we removed sw_sync_timeline this arg has not been really used by
anyone, all its users pass the size of struct sync_timeline there.

So simplify this function but not requiring the size anymore.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove unnecessary check for fence
Gustavo Padovan [Tue, 31 May 2016 19:59:02 +0000 (16:59 -0300)]
staging/android: remove unnecessary check for fence

When we call sync_print_fence() fence is always valid.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: rename android_fence to timeline_fence
Gustavo Padovan [Tue, 31 May 2016 19:59:01 +0000 (16:59 -0300)]
staging/android: rename android_fence to timeline_fence

We are moving out of staging/android so rename it to a name that is not
related to android anymore.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove sw_sync.[ch] files
Gustavo Padovan [Tue, 31 May 2016 19:59:00 +0000 (16:59 -0300)]
staging/android: remove sw_sync.[ch] files

We can glue the sw_sync file operations directly on the sync framework
without the need to pass through sw_sync wrappers.

It only builds sw_sync debugfs file support if CONFIG_SW_SYNC is enabled.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove sw_sync_timeline and sw_sync_pt
Gustavo Padovan [Tue, 31 May 2016 19:58:59 +0000 (16:58 -0300)]
staging/android: remove sw_sync_timeline and sw_sync_pt

As we moved value storage to sync_timeline and fence those two structs
became useless and can be removed now.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove struct sync_timeline_ops
Gustavo Padovan [Tue, 31 May 2016 19:58:58 +0000 (16:58 -0300)]
staging/android: remove struct sync_timeline_ops

Move drv_name, the last field of sync_timeline_ops, to sync_timeline
and remove sync_timeline_ops.

struct sync_timeline_ops was just an extra abstraction on top of
fence_ops, and in the last few commits we removed all it ops in favor
of cleaner fence_ops.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: remove .{fence, timeline}_value_str() from timeline_ops
Gustavo Padovan [Tue, 31 May 2016 19:58:57 +0000 (16:58 -0300)]
staging/android: remove .{fence, timeline}_value_str() from timeline_ops

Now that the value of fence and the timeline are not stored by sw_sync
anymore we can remove this extra abstraction to retrieve this data.

This patch changes both fence_ops (.fence_value_str and
.timeline_value_str) to return the str directly.

It also clean up struct sync_timeline_ops by removing both ops from there.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging/android: store last signaled value on sync timeline
Gustavo Padovan [Tue, 31 May 2016 19:58:56 +0000 (16:58 -0300)]
staging/android: store last signaled value on sync timeline

Now fence timeline is aware of the last signaled fence, as it
receives the increment to the current value in sync_timeline_signal().

That allow us to remove .has_signaled() from timeline_ops as we can
directly compare using timeline->value and fence->seqno in sync.c

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: avoid using timeval
Arnd Bergmann [Fri, 17 Jun 2016 19:56:15 +0000 (21:56 +0200)]
staging: comedi: avoid using timeval

Comedi uses 32-bit seconds for its timestamps, on both 32-bit and
64-bit machines. For all I can tell, this was originally meant as
a 'timespec', which would overflow in 2038 because of the use of
a signed 'long' on 32-bit machines, but it is now used as an
array of two unsigned 'lsampl_t' values in comedilib, which will
only overflow in 2106, on both 32-bit and 64-bit machines.

In an effort to get rid of all uses of 'struct timeval' in the kernel,
this replaces the internal code with a call to ktime_get_real_ts64()
and a comment at the location of the conversion.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: dt2817: Coding style issue fixed.
Ravishankar Karkala Mallikarjunayya [Fri, 17 Jun 2016 11:26:20 +0000 (16:56 +0530)]
Staging: comedi: dt2817: Coding style issue fixed.

This fixes up a WARNING: 'Block comments use a trailing */ on a
separate line' found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: dt2815: Comment issue fixed
Ravishankar Karkala Mallikarjunayya [Fri, 17 Jun 2016 11:26:18 +0000 (16:56 +0530)]
Staging: comedi: dt2815: Comment issue fixed

This fixes up a WARNING: 'Block comments use a trailing */ on a
separate line' found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: dt2814: Block comment issue fixed
Ravishankar Karkala Mallikarjunayya [Fri, 17 Jun 2016 11:26:17 +0000 (16:56 +0530)]
Staging: comedi: dt2814: Block comment issue fixed

This fixes up a WARNING: 'Block comments use a trailing */ on a
separate line' found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: serial2002: Fix unnecessary cast styling issue
Chris Cesare [Thu, 9 Jun 2016 19:39:03 +0000 (15:39 -0400)]
staging: comedi: serial2002: Fix unnecessary cast styling issue

checkpatch.pl warns that a cast of 1 to (long long) is unnecessary.
Remove the cast and also add code to check and make sure that
maxdata_list[chan] is not shifted too far, as suggested by Ian
Abbott.

Signed-off-by Chris Cesare <chris.cesare@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: serial2002: Fix bare unsigned styling issue
Chris Cesare [Thu, 9 Jun 2016 19:39:02 +0000 (15:39 -0400)]
staging: comedi: serial2002: Fix bare unsigned styling issue

checkpatch.pl warns about a bare unsigned. Add type int to make
explicit and suit the coding style.

Signed-off-by Chris Cesare <chris.cesare@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: fix comment issue fixed for das800.c
Ravishankar Karkala Mallikarjunayya [Tue, 7 Jun 2016 08:36:18 +0000 (14:06 +0530)]
Staging: comedi: fix comment issue fixed for das800.c

This is a patch to the das800.c file that fixes up a
WARNING: 'Block comments use a trailing */ on a separate line'
found by the checkpatch.pl tool

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: Block comment issue fixed for das16.c
Ravishankar Karkala Mallikarjunayya [Tue, 7 Jun 2016 08:36:17 +0000 (14:06 +0530)]
Staging: comedi: Block comment issue fixed for das16.c

This is a patch to the das16.c file that fixes up a
WARNING: 'Block comments use a trailing */ on a separate line'
found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: fix blank line issue in das16.c
Ravishankar Karkala Mallikarjunayya [Tue, 7 Jun 2016 08:36:16 +0000 (14:06 +0530)]
Staging: comedi: fix blank line issue in das16.c

This is a patch to the das16.c file that fixes up a blank line after
function/struct/union/enum  check found by the checkpatch.pl tool

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: dmm32at: fix BIT macro issue.
Ravishankar Karkala Mallikarjunayya [Tue, 14 Jun 2016 05:53:22 +0000 (11:23 +0530)]
Staging: comedi: dmm32at: fix BIT macro issue.

This Replace all occurences of (1<<x) by BIT(x) and DMM32AT_CTRL_PAGE(x),
DMM32AT_AI_CFG_SCINT(x) macros to get rid of checkpatch.pl
"CHECK" output "Prefer using the BIT macro"

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: Used unsigned int instead of unsigned issue in jr3_pci.c
Ravishankar Karkala Mallikarjunayya [Mon, 6 Jun 2016 11:01:23 +0000 (16:31 +0530)]
Staging: comedi: Used unsigned int instead of unsigned issue in jr3_pci.c

This is a patch to the jr3_pci.c file that fixes up a
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: fix BIT macro issue in das6402.c
Ravishankar Karkala Mallikarjunayya [Mon, 6 Jun 2016 11:01:20 +0000 (16:31 +0530)]
Staging: comedi: fix BIT macro issue in das6402.c

This patch Replace all occurences of (1<<x) by BIT(x) and DAS6402_CTRL_TRIG(x),
DAS6402_MODE_RANGE(x), DAS6402_MODE_DMA(x) macros in the file das6402.c
to get rid of checkpatch.pl "CHECK" output "Prefer using the BIT macro"

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: Prefer using the BIT macro issue in das16.c
Ravishankar Karkala Mallikarjunayya [Mon, 6 Jun 2016 11:01:18 +0000 (16:31 +0530)]
Staging: comedi: Prefer using the BIT macro issue in das16.c

This patch Replace all occurences of (1<<x) by BIT(x) in the file das16.c
to get rid of checkpatch.pl "CHECK" output "Prefer using the BIT macro"

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: Fix comment issues in jr3_pci.c
Ravishankar Karkala Mallikarjunayya [Mon, 6 Jun 2016 11:01:17 +0000 (16:31 +0530)]
Staging: comedi: Fix comment issues in jr3_pci.c

This is a patch to the jr3_pci.c file that fixes up a
WARNING: 'Block comments use a trailing */ on a separate line'
found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi:Fix a warning issues in me_daq.c
Ravishankar Karkala Mallikarjunayya [Mon, 6 Jun 2016 11:01:16 +0000 (16:31 +0530)]
Staging: comedi:Fix a warning issues in me_daq.c

This is a patch to the me_daq.c file that fixes up a
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agoStaging: comedi: Indentation issue in mpc624.c
Ravishankar Karkala Mallikarjunayya [Mon, 6 Jun 2016 11:01:15 +0000 (16:31 +0530)]
Staging: comedi: Indentation issue in mpc624.c

This is a patch to the mpc624.c file that fixes up a
WARNING: 'Statements should start on a tabstop' found by
the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: adl_pci9118: fix spelling mistake "acqusition" -> "acquisition"
Colin Ian King [Sat, 4 Jun 2016 05:35:20 +0000 (06:35 +0100)]
staging: comedi: adl_pci9118: fix spelling mistake "acqusition" -> "acquisition"

trivial fix to spelling mistake

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: addi_apci_1564: remove unnecessary wdog register defines
H Hartley Sweeten [Wed, 8 Jun 2016 18:26:43 +0000 (11:26 -0700)]
staging: comedi: addi_apci_1564: remove unnecessary wdog register defines

The watchdog subdevice is supported using the addi_watchdog module and
it uses the register defines from addi_tcw.h. The only register define
needed it the iobase offset to the register block.

Remove the unnecessary defines and rename the iobase define.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: addi_apci_1564: rewrite the counter subdevice support
H Hartley Sweeten [Wed, 8 Jun 2016 18:26:42 +0000 (11:26 -0700)]
staging: comedi: addi_apci_1564: rewrite the counter subdevice support

Like the timer, the support functions for the counter subdevice are broken.

Rewrite the code to follow the comedi API.

The new implementation is based on the (minimal) datasheet I have from
ADDI-DATA.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: addi_apci_1564: rewrite the timer subdevice support
H Hartley Sweeten [Wed, 8 Jun 2016 18:26:41 +0000 (11:26 -0700)]
staging: comedi: addi_apci_1564: rewrite the timer subdevice support

The support functions for the timer subdevice are broken.

1) The (*insn_write) assumes that insn->n is always 2 (data[1] is used)
2) The (*insn_read) assumes that insn->n is always 2 (data can be returned in
   data[0] and data[1]).
3) The (*insn_config) does not follow the API. It assumes insn->n is always 4
   (data[1], data[2] and data[3] are used). It also doesn't use data[0] to
   determine what the config "instruction" is.

Rewrite the code to follow the comedi API and add the missing comedi driver
comment block.

The new implementation is based on the (minimal) datasheet I have from
ADDI-DATA.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: addi_apci_1564: use comedi_handle_event() for counters
H Hartley Sweeten [Wed, 8 Jun 2016 18:26:40 +0000 (11:26 -0700)]
staging: comedi: addi_apci_1564: use comedi_handle_event() for counters

The counter subdevice can generate an interrupt. Currently send_sig() is used
to let the task know when the interrupt occurs. Use the dev->read_subdev and
comedi_handle_events() instead.

Remove the, now unused, 'tsk_current' member from the private data and the
unnecessary include of <linux/sched.h>.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: addi_apci_1564: use comedi_handle_event() for timer
H Hartley Sweeten [Wed, 8 Jun 2016 18:26:39 +0000 (11:26 -0700)]
staging: comedi: addi_apci_1564: use comedi_handle_event() for timer

The timer subdevice can generate an interrupt. Currently send_sig() is used
to let the task know when the interrupt occurs. Use the dev->read_subdev
and comedi_handle_events() instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: addi_apci_1564: clarify change-of-state interrupt support
H Hartley Sweeten [Wed, 8 Jun 2016 18:26:38 +0000 (11:26 -0700)]
staging: comedi: addi_apci_1564: clarify change-of-state interrupt support

This board supports change-of-state interrupts on digital inputs 4 to 19
not 0 to 15.

The current code "works" but it could set inappropriate bits in the mode1
and mode2 registers that setup which channels are enabled. It also doesn't
return the status of the upper 4 channels (19 to 16).

Fix the comment and mask the mode1/mode2 values so that only the interrupt
capable channels can be enabled.

Add the SDF_LSAMPL flag to the subdevice so that 32-bit samples are used
instead of 16-bit ones. This allows returning the upper 4 channels. Use
the remaining bits in the sample to return "event" flags to the user.

The timer and counter subdevices can also generate interrupts and are a bit
hacked. They don't currently follow the comedi API and they use send_sig()
to let the task that know that the interrupt occured. The "event" flags will
be used instead when these subdevices are fixed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: plx9080.h: include headers for declarations
Ian Abbott [Fri, 20 May 2016 13:49:22 +0000 (14:49 +0100)]
staging: comedi: plx9080.h: include headers for declarations

Add `#include` lines to declare stuff used by "plx9080.h" itself.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: plx9080.h: Add kerneldoc comments
Ian Abbott [Fri, 20 May 2016 13:49:21 +0000 (14:49 +0100)]
staging: comedi: plx9080.h: Add kerneldoc comments

Document the DMA descriptor `struct plx_dma_desc`, and the DMA abort
function `plx9080_abort_dma()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: plx9080.h: tidy up some comments
Ian Abbott [Fri, 20 May 2016 13:49:20 +0000 (14:49 +0100)]
staging: comedi: plx9080.h: tidy up some comments

Use the usual block comment style and remove some excess spaces from
single-line comments.  Remove some obvious stuff about register offsets
being zero relative.  Remove some text about the original history of the
file, as it bears hardly any resemblance to it now.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: drivers: add PLX PCI 9080 DMATHR register values
Ian Abbott [Fri, 20 May 2016 13:49:19 +0000 (14:49 +0100)]
staging: comedi: drivers: add PLX PCI 9080 DMATHR register values

Add macros in "plx9080.h" that define values for the DMATHR register
values.  Use the prefix `PLX_DMATHR_` for the macros.  Make use of the
`BIT(x)` and `GENMASK(h,l)` macros to define the values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: drivers: re-do PLX PCI 9080 DMACSRx register values
Ian Abbott [Fri, 20 May 2016 13:49:18 +0000 (14:49 +0100)]
staging: comedi: drivers: re-do PLX PCI 9080 DMACSRx register values

Replace the existing macros in "plx9080.h" that define values for the
DMACSR0 and DMACSR0 registers.  Use the prefix `PLX_DMACSR_` for the
macros.  Make use of the `BIT(x)` macro to define the values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: drivers: re-do PLX PCI 9080 DMADPRx register values
Ian Abbott [Fri, 20 May 2016 13:49:17 +0000 (14:49 +0100)]
staging: comedi: drivers: re-do PLX PCI 9080 DMADPRx register values

Replace the existing macros in "plx9080.h" that define values for the
DMADPR0 and DMADPR1 registers.  (A little-endian version of the register
value is also placed in the `next` member of `struct plx_dma_desc`.)
Use the prefix `PLX_DMADPR_` for the macros.  Make use of the `BIT(x)`
and `GENMASK(h,l)` macros to define the values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: drivers: re-do PLX PCI 9080 DMAMODEx register values
Ian Abbott [Fri, 20 May 2016 13:49:16 +0000 (14:49 +0100)]
staging: comedi: drivers: re-do PLX PCI 9080 DMAMODEx register values

Replace the existing macros in "plx9080.h" that define values for the
DMAMODE0 and DMAMODE1 registers.  Use the prefix `PLX_DMAMODE_` for the
macros.  Make use of the `BIT(x)` and `GENMASK(h,l)` macros to define
the values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: plx9080.h: add hard-coded PCIHIDR register value
Ian Abbott [Fri, 20 May 2016 13:49:15 +0000 (14:49 +0100)]
staging: comedi: plx9080.h: add hard-coded PCIHIDR register value

For the PLX PCI 9080, the read-only PCIHIDR register is hard-coded with
the value `0x908010b5`.  Add a macro `PLX_PCIHIDR_9080` that expands to
this value.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8 years agostaging: comedi: drivers: re-do PLX PCI 9080 CNTRL register values
Ian Abbott [Fri, 20 May 2016 13:49:14 +0000 (14:49 +0100)]
staging: comedi: drivers: re-do PLX PCI 9080 CNTRL register values

Replace the existing macros in "plx9080.h" that define values for the
CNTRL register.  Use the prefix `PLX_CNTRL_` for the macros.  Make use
of the `BIT(x)` and `GENMASK(h,l)` macros to define the values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>