ufs: Fix queue depth handling for best effort cases
Some UFS devices may expose bLUQueueDepth field as zero indicating
that the queue depth depends on the number of resources available
for LUN at a particular instant to handle the outstanding transfer
requests. Currently, when response for SCSI command is TASK_FULL
the LLD decrements the queue depth but fails to increment when the
resources are available. The scsi mid-layer handles the change in
queue depth heuristically and offers simple interface with
->change_queue_depth.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Acked-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Dolev Raviv [Sun, 29 Jun 2014 06:40:19 +0000 (09:40 +0300)]
ufs: Logical Unit (LU) command queue depth
Some of the UFS devices may support different number of commands
that can be queued per LU. At the current implementation,
SW configure each of the UFS devices LU's according to the
controller capability.
In this patch the queue depth available per LU is read and updated in
the LU's SW structure.
Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Raviv Shvili <rshvili@codeaurora.org> Acked-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Dolev Raviv [Sun, 29 Jun 2014 06:40:17 +0000 (09:40 +0300)]
ufs: query descriptor API
Introduces the API for sending queries with descriptors.
A descriptor is a block or page of parameters that describe the device.
The descriptors are classified into types and can range in size
from 2 bytes through 255 bytes.
All descriptors have a length value as their first element, and a type
identification element as their second byte.
All descriptors are readable and some may be write once.
They are accessed using their type, index and selector.
Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Raviv Shvili <rshvili@codeaurora.org> Acked-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
virtio-scsi: Implement change_queue_depth for virtscsi targets
change_queue_depth allows changing per-target queue depth via sysfs.
It also allows the SCSI midlayer to ramp down the number of concurrent
inflight requests in response to a SCSI BUSY status response and allows
the midlayer to ramp the count back up to the device maximum when the
BUSY condition has resolved.
Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Ming Lei [Sun, 6 Jul 2014 14:39:26 +0000 (16:39 +0200)]
virtio-scsi: replace target spinlock with seqcount
The spinlock of tgt_lock is only for serializing read and write
req_vq, one lockless seqcount is enough for the purpose.
On one 16core VM with vhost-scsi backend, the patch can improve
IOPS with 3% on random read test.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
[Add initialization in virtscsi_target_alloc. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
hpsa: fix bad -ENOMEM return value in hpsa_big_passthru_ioctl
When copy_from_user fails, return -EFAULT, not -ENOMEM
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by: Robert Elliott <elliott@hp.com> Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com> Reviewed-by: Scott Teel <scott.teel@hp.com>
Reviewed by: Mike MIller <michael.miller@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
hpsa: remove online devices from offline device list
When devices come on line, they should be removed from the list of
offline devices that are monitored.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Scott Teel <scott.teel@hp.com> Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com>
Reviewed by: Mike MIller <michael.miller@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Arnd Bergmann [Thu, 26 Jun 2014 13:44:52 +0000 (15:44 +0200)]
hpsa: fix non-x86 builds
commit 28e134464734 "[SCSI] hpsa: enable unit attention reporting"
turns on unit attention notifications, but got the change wrong for
all architectures other than x86, which now store an uninitialized
value into the device register.
Gcc helpfully warns about this:
../drivers/scsi/hpsa.c: In function 'hpsa_set_driver_support_bits':
../drivers/scsi/hpsa.c:6373:17: warning: 'driver_support' is used uninitialized in this function [-Wuninitialized]
driver_support |= ENABLE_UNIT_ATTN;
^
This moves the #ifdef so only the prefetch-enable is conditional
on x86, not also reading the initial register contents.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 28e134464734 "[SCSI] hpsa: enable unit attention reporting" Cc: stable@vger.kernel.org # v3.14+ Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Robert Elliott [Thu, 3 Jul 2014 15:18:19 +0000 (10:18 -0500)]
hpsa: do not unconditionally copy sense data
Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
hpsa: fix 6-byte READ/WRITE with 0 length data xfer
a 6-byte READ/WRITE CDB with a 0 block data transfer really
means a 256 block data transfer. The RAID mapping code failed
to handle this case. For 10/12/16 byte READ/WRITEs, 0 just means
no data should be transferred, and should not trigger BUG_ON.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
hpsa: make hpsa_init_one return -ENOMEM if allocation of h->lockup_detected fails
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
On systems with a non power-of-two CPU count the existing MSI-X grouping
code failed to distribute interrupts correctly. Rework the code to
handle arbitrary processor counts.
Also remove the hardcoded upper limit on the number of processors so we
can boot on large systems.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Sreekanth Reddy <Sreekanth.reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
On systems with a non power-of-two CPU count the existing MSI-X grouping
code failed to distribute interrupts correctly. Rework the code to
handle arbitrary processor counts.
Also remove the hardcoded upper limit on the number of processors so we
can boot on large systems.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Sreekanth Reddy <Sreekanth.reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:06:54 +0000 (17:06 -0400)]
mptfusion: tweak null pointer checks
Fixes the following smatch warnings:
drivers/message/fusion/mptbase.c:652 mptbase_reply() warn: variable
dereferenced before check 'reply' (see line 639)
[JL: No-brainer, the enclosing switch statement dereferences
reply, so we can't get here unless reply is valid.]
drivers/message/fusion/mptsas.c:1255 mptsas_taskmgmt_complete() error:
we previously assumed 'pScsiTmReply' could be null (see line 1227)
[HCH: Reading the code in mptsas_taskmgmt_complete it's pretty
obvious that it can't do anything useful if mr/pScsiTmReply are
NULL, so I suspect it would be best to just return at the
beginning of the function.
I'd love to understand if it actually could ever be zero, which I
doubt. Maybe the LSI people can shed some light on that?]
drivers/message/fusion/mptsas.c:3888 mptsas_not_responding_devices()
error: we previously assumed 'port_info->phy_info' could be null
(see line 3875)
[HCH: It's pretty obvious from reading mptsas_sas_io_unit_pg0 that
we never register a port_info with a NULL phy_info in the lists,
so all NULL checks on it could be deleted.]
drivers/message/fusion/mptscsih.c:1284 mptscsih_info() error:
we previously assumed 'h' could be null (see line 1274)
[HCH: shost_priv can't return NULL, so the if (h) should be
removed.]
drivers/message/fusion/mptscsih.c:1388 mptscsih_qcmd() error: we
previously assumed 'vdevice' could be null (see line 1373)
[HCH: vdevice can't ever be NULL here, it's allocated in
->slave_alloc and thus guaranteed to be around when
->queuecommand is called.]
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:06:42 +0000 (17:06 -0400)]
mptfusion: combine fw_event_work and its event_data
Tack the firmware reply event_data payload to the end of its
corresponding struct fw_event_work allocation. Rework fw_event_work
allocation calculations to include the event_data size where
appropriate.
This clarifies the code a bit and avoids the following smatch warnings:
drivers/message/fusion/mptsas.c:1003 mptsas_queue_device_delete()
error: memcpy() 'fw_event->event_data' too small (29 vs 36)
drivers/message/fusion/mptsas.c:1017 mptsas_queue_rescan() error: not
allocating enough data 168 vs 160
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:06:28 +0000 (17:06 -0400)]
mptfusion: make adapter prod_name[] a pointer
The struct _MPT_ADAPTER doesn't need a full copy of the product string,
so prod_name can point to the string literal storage that the driver
already provides.
Avoids the following smatch warning:
drivers/message/fusion/mptbase.c:2858 MptDisplayIocCapabilities()
warn: this array is probably non-NULL. 'ioc->prod_name'
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:06:12 +0000 (17:06 -0400)]
mptfusion: use memdup_user
Let memdup_user handle the kmalloc, copy_from_user and error checking
kfree code.
Spotted by the following smatch (false positive) warning:
drivers/message/fusion/mptctl.c:1369 mptctl_getiocinfo() warn:
possible info leak 'karg'
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:06:02 +0000 (17:06 -0400)]
mptfusion: remove redundant kfree checks
Fixes the following smatch warnings:
drivers/message/fusion/mptfc.c:529 mptfc_target_destroy() info:
redundant null check on starget->hostdata calling kfree()
drivers/message/fusion/mptspi.c:465 mptspi_target_destroy() info:
redundant null check on starget->hostdata calling kfree()
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:05:49 +0000 (17:05 -0400)]
mptfusion: mark file-private functions as static
Fixes the following sparse warnings:
drivers/message/fusion/mptbase.c:7011:1: warning: symbol
'mpt_SoftResetHandler' was not declared. Should it be static?
drivers/message/fusion/mptsas.c:1578:23: warning: symbol
'mptsas_refreshing_device_handles' was not declared. Should it be
static?
drivers/message/fusion/mptsas.c:3653:24: warning: symbol
'mptsas_expander_add' was not declared. Should it be static?
drivers/message/fusion/mptsas.c:5327:1: warning: symbol
'mptsas_shutdown' was not declared. Should it be static?
drivers/message/fusion/mptspi.c:624:1: warning: symbol
'mptscsih_quiesce_raid' was not declared. Should it be static?
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:05:34 +0000 (17:05 -0400)]
mpt3sas: combine fw_event_work and its event_data
Tack the firmware reply event_data payload to the end of its
corresponding struct fw_event_work allocation. This matches the
convention in the mptfusion driver and simplifies the code.
This avoids the following smatch warning:
drivers/scsi/mpt3sas/mpt3sas_scsih.c:2519
mpt3sas_send_trigger_data_event() warn: possible memory leak of
'fw_event'
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
In _scsih_{slave,target}_alloc, an incorrect structure type is passed
to sizeof() when allocating storage for hostdata. Luckily larger
structure types were used, so at least the wrong sizes were safe:
drivers/scsi/mpt3sas/mpt3sas_scsih.c:1166 _scsih_target_alloc()
warn: struct type mismatch 'MPT3SAS_TARGET vs scsi_target'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:1280 _scsih_slave_alloc()
warn: struct type mismatch 'MPT3SAS_DEVICE vs scsi_device'
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:04:06 +0000 (17:04 -0400)]
mpt2sas: annotate ioc->reply_post_host_index as __iomem
The MPT2SAS_ADAPTER reply_post_host_index[] holds calculated addresses
in memory mapped register space. Add an "__iomem" annotation to silence
the following sparse warnings:
drivers/scsi/mpt2sas/mpt2sas_base.c:1006:43:
warning: incorrect type in argument 2 (different address spaces)
expected void volatile [noderef] <asn:2>*addr
got unsigned long long [usertype] *<noident>
drivers/scsi/mpt2sas/mpt2sas_base.c:4299:22:
warning: cast removes address space of expression
drivers/scsi/mpt2sas/mpt2sas_base.c:4303:27:
warning: cast removes address space of expression
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Joe Lawrence [Wed, 25 Jun 2014 21:03:33 +0000 (17:03 -0400)]
mpt2sas: combine fw_event_work and its event_data
Tack the firmware reply event_data payload to the end of its
corresponding struct fw_event_work allocation. This matches the
convention in the mptfusion driver and simplifies the code.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
In _scsih_{slave,target}_alloc, an incorrect structure type is passed
to sizeof() when allocating storage for hostdata. Luckily larger
structure types were used, so at least the wrong sizes were safe:
drivers/scsi/mpt2sas/mpt2sas_scsih.c:1295 _scsih_target_alloc()
warn: struct type mismatch 'MPT2SAS_TARGET vs scsi_target'
drivers/scsi/mpt2sas/mpt2sas_scsih.c:1409 _scsih_slave_alloc()
warn: struct type mismatch 'MPT2SAS_DEVICE vs scsi_device'
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Arnd Bergmann [Thu, 26 Jun 2014 12:58:29 +0000 (14:58 +0200)]
3w-xxxx: fix mis-aligned struct accesses
Building an allmodconfig ARM kernel, I get multiple such
warnings because of a spinlock contained in packed structure
in the 3w-xxxx driver:
../drivers/scsi/3w-xxxx.c: In function 'tw_chrdev_ioctl':
../drivers/scsi/3w-xxxx.c:1001:68: warning: mis-aligned access used for structure member [-fstrict-volatile-bitfields]
timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
^
../drivers/scsi/3w-xxxx.c:1001:68: note: when a volatile object spans multiple type-sized locations, the compiler must choose between using a single mis-aligned access to preserve the volatility, or using multiple aligned accesses to avoid runtime faults; this code may fail at runtime if the hardware does not allow this access
The same bug apparently was present in 3w-sas and 3w-9xxx, but has been
fixed in the past. This patch uses the same fix by moving the pragma
in front of the TW_Device_Extension definition, so it only covers
hardware structures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Adam Radford <aradford@gmail.com> Cc: Adam Radford <linuxraid@lsi.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Arnd Bergmann [Thu, 5 Jun 2014 21:29:49 +0000 (23:29 +0200)]
NCR53c406a: don't call free_dma() by default
The NCR53c406a scsi driver normally does not use DMA, unless
the USE_PIO macro is disabled by modifying the source code.
The call to free_dma() for some reason uses #ifdef USE_DMA,
which does not do the right thing, since USE_DMA is defined
as a boolean that is either 0 or 1, but always present.
One case where it gets in the way is randconfig builds on ARM,
which depending on the configuration does not provide a free_dma()
function, causing this build error:
drivers/scsi/NCR53c406a.c: In function 'NCR53c406a_release':
drivers/scsi/NCR53c406a.c:600:3: error: implicit declaration of function 'free_dma' [-Werror=implicit-function-declaration]
free_dma(shost->dma_channel);
^
This changes the code to use #if USE_DMA, to match the
rest of the file, which seems to be what the author intended.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
Arnd Bergmann [Thu, 5 Jun 2014 21:29:48 +0000 (23:29 +0200)]
qlogicfas: don't call free_dma()
The qlogicfas scsi driver does not use DMA, and the call to free_dma()
in its exit function seems to have been copied incorrectly from
another driver but never caused trouble.
One case where it gets in the way is randconfig builds on ARM,
which depending on the configuration does not provide a free_dma()
function, causing this build error:
drivers/scsi/qlogicfas.c: In function 'qlogicfas_release':
drivers/scsi/qlogicfas.c:175:3: error: implicit declaration of function 'free_dma' [-Werror=implicit-function-declaration]
free_dma(shost->dma_channel);
^
Removing the incorrect function calls should be the obvious
fix for this, with no downsides.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
Arnd Bergmann [Thu, 5 Jun 2014 21:29:47 +0000 (23:29 +0200)]
pas16: don't call free_dma()
The pas16 scsi driver does not use DMA, and the call to free_dma()
in its exit function seems to have been copied incorrectly from
another driver but never caused trouble.
One case where it gets in the way is randconfig builds on ARM,
which depending on the configuration does not provide a free_dma()
function, causing this build error:
drivers/scsi/pas16.c: In function 'pas16_release':
drivers/scsi/pas16.c:611:3: error: implicit declaration of function 'free_dma' [-Werror=implicit-function-declaration]
free_dma(shost->dma_channel);
Removing the incorrect function calls should be the obvious
fix for this, with no downsides.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
Arnd Bergmann [Thu, 5 Jun 2014 21:29:46 +0000 (23:29 +0200)]
advansys: don't build ARM
The advansys SCSI driver uses the dma_cache_sync function, which is
not available on the ARM architecture, and cannot be implemented
correctly, so we always get this build error:
drivers/scsi/advansys.c: In function 'advansys_get_sense_buffer_dma':
drivers/scsi/advansys.c:7882:2: error: implicit declaration of function 'dma_cache_sync' [-Werror=implicit-function-declaration]
dma_cache_sync(board->dev, scp->sense_buffer,
^
It seems nobody has missed this driver so far, so let's just
disable it for ARM to help randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
Tyrel Datwyler [Fri, 27 Jun 2014 00:03:55 +0000 (19:03 -0500)]
ibmvfc: fix little endian issues
Added big endian annotations to relevant data structure fields, and necessary
byte swappings to support little endian builds.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.
Verified by compilation only.
The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
when strict
return
- ret
+ C
;
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Ben Hutchings [Sun, 8 Jun 2014 22:33:25 +0000 (23:33 +0100)]
bfa: Fix undefined bit shift on big-endian architectures with 32-bit DMA address
bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits
each way. In two places the argument type is dma_addr_t, which may be
32-bit, in which case the effect of the bit shift is undefined:
drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq':
drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default]
addr = bfa_sgaddr_le(sg_dma_address(sg));
^
drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default]
drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default]
addr = bfa_sgaddr_le(sg_dma_address(sg));
^
drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default]
Avoid this by adding casts to u64 in bfa_swap_words().
Compile-tested only.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: stable@vger.kernel.org Fixes: f16a17507b09 ('[SCSI] bfa: remove all OS wrappers') Signed-off-by: Christoph Hellwig <hch@lst.de>
Mike Christie [Tue, 1 Jul 2014 16:24:38 +0000 (11:24 -0500)]
bnx2i, be2iscsi: fix custom stats length
The custom stats is an array with custom_length indicating the length
of the array. This patch fixes bnx2i and be2iscsi's setting of the
custom stats length. They both just have the one, eh_abort_cnt, so that should
be in the first entry of the custom array and custom_length should then
be one.
Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
K. Y. Srinivasan [Fri, 18 Jul 2014 15:11:27 +0000 (17:11 +0200)]
sd: fix a bug in deriving the FLUSH_TIMEOUT from the basic I/O timeout
Commit ID: 7e660100d85af860e7ad763202fff717adcdaacd added code to derive the
FLUSH_TIMEOUT from the basic I/O timeout. However, this patch did not use the
basic I/O timeout of the device. Fix this bug.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
scsi: add a blacklist flag which enables VPD page inquiries
Despite supporting modern SCSI features some storage devices continue to
claim conformance to an older version of the SPC spec. This is done for
compatibility with legacy operating systems.
Linux by default will not attempt to read VPD pages on devices that
claim SPC-2 or older. Introduce a blacklist flag that can be used to
trigger VPD page inquiries on devices that are known to support them.
Reported-by: KY Srinivasan <kys@microsoft.com> Tested-by: KY Srinivasan <kys@microsoft.com> Reviewed-by: KY Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> CC: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
scsi: move the writeable field from struct scsi_device to struct scsi_cd
We currently set the field in common code based on the device type,
but then only use it in the cdrom driver which also overrides the
value previously set in the generic code.
Just leave this entirely to the CDROM driver to make everyones life
simpler.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
fnic: reject device resets without assigned tags for the blk-mq case
Current the midlayer fakes up a struct request for the explicit reset
ioctls, and those don't have a tag allocated to them. The fnic driver pokes
into midlayer structures to paper over this design issue, but that won't
work for the blk-mq case.
Either someone who can actually test the hardware will have to come up with
a similar hack for the blk-mq case, or we'll have to bite the bullet and fix
the way the EH ioctls work for real, but until that happens we fail these
explicit requests here.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com> Cc: Hiral Patel <hiralpat@cisco.com> Cc: Suma Ramars <sramars@cisco.com> Cc: Brian Uchino <buchino@cisco.com>
This patch adds support for an alternate I/O path in the scsi midlayer
which uses the blk-mq infrastructure instead of the legacy request code.
Use of blk-mq is fully transparent to drivers, although for now a host
template field is provided to opt out of blk-mq usage in case any unforseen
incompatibilities arise.
In general replacing the legacy request code with blk-mq is a simple and
mostly mechanical transformation. The biggest exception is the new code
that deals with the fact the I/O submissions in blk-mq must happen from
process context, which slightly complicates the I/O completion handler.
The second biggest differences is that blk-mq is build around the concept
of preallocated requests that also include driver specific data, which
in SCSI context means the scsi_cmnd structure. This completely avoids
dynamic memory allocations for the fast path through I/O submission.
Due the preallocated requests the MQ code path exclusively uses the
host-wide shared tag allocator instead of a per-LUN one. This only
affects drivers actually using the block layer provided tag allocator
instead of their own. Unlike the old path blk-mq always provides a tag,
although drivers don't have to use it.
For now the blk-mq path is disable by defauly and must be enabled using
the "use_blk_mq" module parameter. Once the remaining work in the block
layer to make blk-mq more suitable for slow devices is complete I hope
to make it the default and eventually even remove the old code path.
Based on the earlier scsi-mq prototype by Nicholas Bellinger.
Thanks to Bart Van Assche and Robert Elliot for testing, benchmarking and
various sugestions and code contributions.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
scatterlist: allow chaining to preallocated chunks
Blk-mq drivers usually preallocate their S/G list as part of the request,
but if we want to support the very large S/G lists currently supported by
the SCSI code that would tie up a lot of memory in the preallocated request
pool. Add support to the scatterlist code so that it can initialize a
S/G list that uses a preallocated first chunks and dynamically allocated
additional chunks. That way the scsi-mq code can preallocate a first
page worth of S/G entries as part of the request, and dynamically extend
the S/G list when needed.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
scsi: unwind blk_end_request_all and blk_end_request_err calls
Replace the calls to the various blk_end_request variants with opencode
equivalents. Blk-mq is using a model that gives the driver control
between the bio updates and the actual completion, and making the old
code follow that same model allows us to keep the code more similar for
both paths.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
scsi: only maintain target_blocked if the driver has a target queue limit
This saves us an atomic operation for each I/O submission and completion
for the usual case where the driver doesn't set a per-target can_queue
value. Only a few iscsi hardware offload drivers set the per-target
can_queue value at the moment.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
scsi: fix the {host,target,device}_blocked counter mess
Seems like these counters are missing any sort of synchronization for
updates, as a over 10 year old comment from me noted. Fix this by
using atomic counters, and while we're at it also make sure they are
in the same cacheline as the _busy counters and not needlessly stored
to in every I/O completion.
With the new model the _busy counters can temporarily go negative,
so all the readers are updated to check for > 0 values. Longer
term every successful I/O completion will reset the counters to zero,
so the temporarily negative values will not cause any harm.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
Avoid taking the queue_lock to check the per-device queue limit. Instead
we do an atomic_inc_return early on to grab our slot in the queue,
and if necessary decrement it after finishing all checks.
Unlike the host and target busy counters this doesn't allow us to avoid the
queue_lock in the request_fn due to the way the interface works, but it'll
allow us to prepare for using the blk-mq code, which doesn't use the
queue_lock at all, and it at least avoids a queue_lock round trip in
scsi_device_unbusy, which is still important given how busy the queue_lock
is.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
Avoid taking the host-wide host_lock to check the per-host queue limit.
Instead we do an atomic_inc_return early on to grab our slot in the queue,
and if necessary decrement it after finishing all checks.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
Avoid taking the host-wide host_lock to check the per-target queue limit.
Instead we do an atomic_inc_return early on to grab our slot in the queue,
and if necessary decrement it after finishing all checks.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
scsi: push host_lock down into scsi_{host,target}_queue_ready
Prepare for not taking a host-wide lock in the dispatch path by pushing
the lock down into the places that actually need it. Note that this
patch is just a preparation step, as it will actually increase lock
roundtrips and thus decrease performance on its own.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
scsi: set ->scsi_done before calling scsi_dispatch_cmd
The blk-mq code path will set this to a different function, so make the
code simpler by setting it up in a legacy-request specific place.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
scsi: centralize command re-queueing in scsi_dispatch_fn
Make sure we only have the logic for requeing commands in one place.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
Factor out a helper to set the _blocked values, which we'll reuse for the
blk-mq code path.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
Currently cmd->allowed is initialized from rq->retries for discard
commands, but retries is always 0 for non-BLOCK_PC requests. Set it
to the standard number of retries instead.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
Currently cmd->allowed is initialized from rq->retries for write same
commands, but retries is always 0 for non-BLOCK_PC requests. Set it
to the standard number of retries instead.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
sd: don't use scsi_setup_blk_pc_cmnd for discard requests
Simplify handling of discard requests by setting up the command directly
instead of initializing request fields and then calling
scsi_setup_blk_pc_cmnd to propagate the information into the command.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
sd: don't use scsi_setup_blk_pc_cmnd for write same requests
Simplify handling of write same requests by setting up the command directly
instead of initializing request fields and then calling
scsi_setup_blk_pc_cmnd to propagate the information into the command.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Webb Scales <webbnh@hp.com>
sd: don't use scsi_setup_blk_pc_cmnd for flush requests
Simplify handling of flush requests by setting up the command directly
instead of initializing request fields and then calling
scsi_setup_blk_pc_cmnd to propagate the information into the command.
Also rename scsi_setup_flush_cmnd to sd_setup_flush_cmnd for consistency.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
The data direction fiel in the SCSI command is derived only from the block
request structure. Move setting it up into common code instead of
duplicating it in the ULDs.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
This comes from scsi_io_completion (in scsi_lib.c) while handling error
codes other than DID_RESET or not deferred sense keys i.e. this is
actually handled by the SCSI mid layer. But what gets displayed here is
"Unhandled error code" which is quite misleading as it indicates
something that is not addressed by the mid layer.
The description string is based on the sense key and sometimes on the
additional sense code;
since the ACTION_FAIL case always prints the sense key and the
additional sense code, this patch removes the description string
completely because it does not add useful information.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Because of the removal of the scsi_tgt kernel module, the kbuild variables
CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS
are obsolete. This patch removes these variables. This patch is the result
of the following command:
find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
Now that the ibmvstgt driver as the only user of scsi_tgt is gone, the
scsi_tgt kernel module, the CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and
CONFIG_SCSI_FC_TGT_ATTRS kbuild variable, the scsi_host_template
transfer_response method are no longer needed.
[hch: minor updates to the current tree, changelog update]
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
Hannes Reinecke [Wed, 25 Jun 2014 14:39:59 +0000 (16:39 +0200)]
scsi: use dev_printk variants where possible
Using dev_printk variants prefixes the logging message with
the originating device, which makes debugging easier.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Wed, 25 Jun 2014 14:39:58 +0000 (16:39 +0200)]
scsi: use dev_printk() variants for ioctl
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Wed, 25 Jun 2014 14:39:57 +0000 (16:39 +0200)]
scsi: Implement st_printk()
Update the st driver to use dev_printk() variants instead of
plain printk(); this will prefix logging messages with the
appropriate device.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Wed, 25 Jun 2014 14:39:56 +0000 (16:39 +0200)]
scsi: Implement ch_printk()
Update the ch driver to use dev_printk() variants instead of
plain printk(); this will prefix logging messages with the
appropriate device.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Wed, 25 Jun 2014 14:39:55 +0000 (16:39 +0200)]
scsi: Implement sg_printk()
Update the sg driver to use dev_printk() variants instead of
plain printk(); this will prefix logging messages with the
appropriate device.
Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Doug Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Wed, 25 Jun 2014 14:39:54 +0000 (16:39 +0200)]
scsi: Implement sr_printk()
Update the sr driver to use dev_printk() variants instead of
plain printk(); this will prefix logging messages with the
appropriate device.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Wed, 25 Jun 2014 13:27:39 +0000 (15:27 +0200)]
scsi_scan: Fixup scsilun_to_int()
scsilun_to_int() has an error which prevents it from generating
correct LUN numbers for 64bit values.
Also we should remove the misleading comment about portions of
the LUN being ignored; the initiator should treat the LUN as
an opaque value.
And, finally, the example given should use the correct
prefix (here: extended flat space addressing scheme).
This patch includes the modifications suggested by
Bart van Assche.
Cc: Bart van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Wed, 25 Jun 2014 13:27:37 +0000 (15:27 +0200)]
Add module param type 'ullong'
Some driver might want to pass in an 64-bit value, so introduce
a module param type 'ullong'.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Tue, 3 Jun 2014 08:58:53 +0000 (10:58 +0200)]
scsi_scan: Restrict sequential scan to 256 LUNs
Sequential scan for more than 256 LUNs is very fragile as
LUNs might not be numbered sequentially after that point.
SAM revisions later than SCSI-3 impose a structure on
LUNs larger than 256, making LUN numbers between 256
and 16384 illegal.
SCSI-3, however allows for plain 64-bit numbers with
no internal structure.
So restrict sequential LUN scan to 256 LUNs and add a
new blacklist flag 'BLIST_SCSI3LUN' to scan up to
max_lun devices.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Tue, 3 Jun 2014 08:58:52 +0000 (10:58 +0200)]
scsi: Remove CONFIG_SCSI_MULTI_LUN
Obsolete; either use 'max_lun' if the host supports only a
limited number of LUNs or BLIST_NOLUN if the target has
problems addressing more than one LUN.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Douglas Gilbert [Wed, 25 Jun 2014 12:08:03 +0000 (14:08 +0200)]
sg: O_EXCL and other lock handling
This addresses a problem reported by Vaughan Cao concerning
the correctness of the O_EXCL logic in the sg driver. POSIX
doesn't defined O_EXCL semantics on devices but "allow only
one open file descriptor at a time per sg device" is a rough
definition. The sg driver's semantics have been to wait
on an open() when O_NONBLOCK is not given and there are
O_EXCL headwinds. Nasty things can happen during that wait
such as the device being detached (removed). So multiple
locks are reworked in this patch making it large and hard
to break down into digestible bits.
This patch is against Linus's current git repository which
doesn't include any sg patches sent in the last few weeks.
Hence this patch touches as little as possible that it
doesn't need to and strips out most SCSI_LOG_TIMEOUT()
changes in v3 because Hannes said he was going to rework all
that stuff.
The sg3_utils package has several test programs written to
test this patch. See examples/sg_tst_excl*.cpp .
Not all the locks and flags in sg have been re-worked in
this patch, notably sg_request::done . That can wait for
a follow-up patch if this one meets with approval.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
Douglas Gilbert [Wed, 4 Jun 2014 14:58:30 +0000 (10:58 -0400)]
sg: add SG_FLAG_Q_AT_TAIL flag
When the SG_IO ioctl was copied into the block layer and
later into the bsg driver, subtle differences emerged.
One difference is the way injected commands are queued through
the block layer (i.e. this is not SCSI device queueing nor SATA
NCQ). Summarizing:
- SG_IO in the block layer: blk_exec*(at_head=false)
- sg SG_IO: at_head=true
- bsg SG_IO: at_head=true
Some time ago Boaz Harrosh introduced a sg v4 flag called
BSG_FLAG_Q_AT_TAIL to override the bsg driver default.
This patch does the equivalent for the sg driver.
ChangeLog:
Introduce SG_FLAG_Q_AT_TAIL flag to cause commands
to be injected into the block layer with
at_head=false.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Douglas Gilbert [Tue, 3 Jun 2014 17:18:18 +0000 (13:18 -0400)]
sg: relax 16 byte cdb restriction
- remove the 16 byte CDB (SCSI command) length limit from the sg driver
by handling longer CDBs the same way as the bsg driver. Remove comment
from sg.h public interface about the cmd_len field being limited to 16
bytes.
- remove some dead code caused by this change
- cleanup comment block at the top of sg.h, fix urls
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Until now the per-command transfer length has exclusively been gated by
the max_sectors parameter in the scsi_host template. Given that the size
of this parameter has been bumped to an unsigned int we have to be
careful not to exceed the target device's capabilities.
If the if the device specifies a Maximum Transfer Length in the Block
Limits VPD we'll use that value. Otherwise we'll use 0xffffffff for
devices that have use_16_for_rw set and 0xffff for the rest. We then
combine the chosen disk limit with max_sectors in the host template. The
smaller of the two will be used to set the max_hw_sectors queue limit.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Clément Calmels [Tue, 3 Jun 2014 21:34:25 +0000 (23:34 +0200)]
sd: bad return code of init_sd
In init_sd function, if kmem_cache_create or mempool_create_slab_pools
calls fail, the error will not be correclty reported because
class_register previously set the value of err to 0.
Signed-off-by: Clément Calmels <clement.calmels@free.fr> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
We must notify the block layer via q->flush_flags after a temporary change
of the cache_type to write through. Without this, a SYNCHRONIZE CACHE
command will still be generated. This patch factors out a helper that
can be called from sd_revalidate_disk and cache_type_store.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
projects / linux-beck.git / log