Shaohua Li [Tue, 29 Apr 2014 11:13:58 +0000 (19:13 +0800)]
raid5: add an option to avoid copy data from bio to stripe cache
The stripe cache has two goals:
1. cache data, so next time if data can be found in stripe cache, disk access
can be avoided.
2. stable data. data is copied from bio to stripe cache and calculated parity.
data written to disk is from stripe cache, so if upper layer changes bio data,
data written to disk isn't impacted.
In my environment, I can guarantee 2 will not happen. And BDI_CAP_STABLE_WRITES
can guarantee 2 too. For 1, it's not common too. block plug mechanism will
dispatch a bunch of sequentail small requests together. And since I'm using
SSD, I'm using small chunk size. It's rare case stripe cache is really useful.
So I'd like to avoid the copy from bio to stripe cache and it's very helpful
for performance. In my 1M randwrite tests, avoid the copy can increase the
performance more than 30%.
Of course, this shouldn't be enabled by default. It's reported enabling
BDI_CAP_STABLE_WRITES can harm some workloads before, so I added an option to
control it.
Neilb:
changed BUG_ON to WARN_ON
Removed some assignments from raid5_build_block which are now not needed.
Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Mon, 5 May 2014 23:36:08 +0000 (09:36 +1000)]
md: avoid possible spinning md thread at shutdown.
If an md array with externally managed metadata (e.g. DDF or IMSM)
is in use, then we should not set safemode==2 at shutdown because:
1/ this is ineffective: user-space need to be involved in any 'safemode' handling,
2/ The safemode management code doesn't cope with safemode==2 on external metadata
and md_check_recover enters an infinite loop.
Even at shutdown, an infinite-looping process can be problematic, so this
could cause shutdown to hang.
NeilBrown [Mon, 5 May 2014 03:34:37 +0000 (13:34 +1000)]
md/raid10: call wait_barrier() for each request submitted.
wait_barrier() includes a counter, so we must call it precisely once
(unless balanced by allow_barrier()) for each request submitted.
Since
commit 20d0189b1012a37d2533a87fb451f7852f2418d1
block: Introduce new bio_split()
in 3.14-rc1, we don't call it for the extra requests generated when
we need to split a bio.
When this happens the counter goes negative, any resync/recovery will
never start, and "mdadm --stop" will hang.
Reported-by: Chris Murphy <lists@colorremedies.com> Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1 Cc: stable@vger.kernel.org (3.14+) Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: NeilBrown <neilb@suse.de>
* pm-cpufreq-next:
cpufreq: Kconfig: Fix spelling errors
cpufreq: Make linux-pm@vger.kernel.org official mailing list
cpufreq: exynos: Use dev_err/info function instead of pr_err/info
* acpica-next: (28 commits)
ACPICA: Update version to 20140325.
ACPICA: acpidump: Update man page.
ACPICA: acpidump: Remove old acpidump source.
ACPICA: acpidump: Update Makefile to build acpidump from ACPICA.
ACPICA: acpidump: Update new structures and add missing file.
ACPICA: acpidump: Add support to generate acpidump release.
ACPICA: Table Manager: Split tbinstal.c into two files.
ACPICA: Table Manager: Misc cleanup and renames, no functional change.
ACPICA: Tables: Add acpi_install_table() API for early table installation.
ACPICA: Tables: Avoid SSDT installation with acpi_gbl_disable_ssdt_table_load.
ACPICA: Tables: Cleanup ACPI_TABLE_ORIGIN_xxx flags.
ACPICA: Tables: Fix table checksums verification before installation.
ACPICA: Tables: Fix unbalanced table validations.
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics.
ACPICA: Tables: Fix multiple ACPI_FREE()s around acpi_tb_add_table().
ACPICA: Tables: Fix the issues in handling virtual addressed tables.
ACPICA: Remove indent divergences to reduce maintenance overhead.
ACPICA: Add a missing field for debug dump of mutex objects.
ACPICA: Linux-specific header: Add support for PPC64 compilation.
ACPICA: Clean up comment divergences in aclinux.h
...
ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().
Linux XSDT validation mechanism backport has introduced a regreession:
Commit: 671cc68dc61f029d44b43a681356078e02d8dab8
Subject: ACPICA: Back port and refine validation of the XSDT root table.
There is a pointer still accessed after unmapping.
This patch fixes this issue. Lv Zheng.
Fixes: 671cc68dc61f (ACPICA: Back port and refine validation of the XSDT root table.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73911
References: https://bugs.archlinux.org/task/39811 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reported-and-tested-by: Bruce Chiarelli <mano155@gmail.com> Reported-and-tested-by: Spyros Stathopoulos <spystath@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* cpufreq-macros:
sh: clk: Use cpufreq_for_each_valid_entry macro for iteration
irda: sh_sir: Use cpufreq_for_each_valid_entry macro for iteration
thermal: cpu_cooling: Use cpufreq_for_each_valid_entry macro for iteration
mips: lemote 2f: Use cpufreq_for_each_entry macro for iteration
mfd: db8500-prcmu: Use cpufreq_for_each_entry macro for iteration
ARM: davinci: da850: Use cpufreq_for_each_entry macro for iteration
cpufreq: Use cpufreq_for_each_* macros for frequency table iteration
cpufreq: Introduce macros for cpufreq_frequency_table iteration
2) ns_capable() check in sock_diag netlink code, from Andrew
Lutomirski.
3) Fix invalid queue pairs handling in virtio_net, from Amos Kong.
4) Checksum offloading busted in sxgbe driver due to incorrect
descriptor layout, fix from Byungho An.
5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen
Lim.
6) Fix uninitialized A and X registers in BPF interpreter, from Alexei
Starovoitov.
7) Fix arch dependencies of candence driver.
8) Fix netlink capabilities checking tree-wide, from Eric W Biederman.
9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in
IFLA_EXT_MASK, from David Gibson.
10) IPV6 FIB dump restart doesn't handle table changes that happen
meanwhile, causing the code to loop forever or emit dups, fix from
Kumar Sandararajan.
11) Memory leak on VF removal in bnx2x, from Yuval Mintz.
12) Bug fixes for new Altera TSE driver from Vince Bridgers.
13) Fix route lookup key in SCTP, from Xugeng Zhang.
14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN
driver. From Oliver Hartkopp.
15) TCP doesn't bump retransmit counters in some code paths, fix from
Eric Dumazet.
16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by
zero. Fix from Liu Yu.
17) Fix locking imbalance in error paths of HHF packet scheduler, from
John Fastabend.
18) Properly reference the transport module when vsock_core_init() runs,
from Andy King.
19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork.
20) IP_ECN_decapsulate() doesn't see a correct SKB network header in
ip_tunnel_rcv(), fix from Ying Cai.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
net: macb: Fix race between HW and driver
net: macb: Remove 'unlikely' optimization
net: macb: Re-enable RX interrupt only when RX is done
net: macb: Clear interrupt flags
net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP
ip_tunnel: Set network header properly for IP_ECN_decapsulate()
e1000e: Restrict MDIO Slow Mode workaround to relevant parts
e1000e: Fix issue with link flap on 82579
e1000e: Expand workaround for 10Mb HD throughput bug
e1000e: Workaround for dropped packets in Gig/100 speeds on 82579
net/mlx4_core: Don't issue PCIe speed/width checks for VFs
net/mlx4_core: Load the Eth driver first
net/mlx4_core: Fix slave id computation for single port VF
net/mlx4_core: Adjust port number in qp_attach wrapper when detaching
net: cdc_ncm: fix buffer overflow
Altera TSE: ALTERA_TSE should depend on HAS_DMA
vsock: Make transport the proto owner
net: sched: lock imbalance in hhf qdisc
net: mvmdio: Check for a valid interrupt instead of an error
net phy: Check for aneg completion before setting state to PHY_RUNNING
...
Daniel Palmer [Sat, 5 Apr 2014 08:05:45 +0000 (17:05 +0900)]
m68k: fix a compiler warning when building for DragonBall
In file included from arch/m68k/kernel/setup.c:4:0:
arch/m68k/kernel/setup_no.c:70:0: warning: "CPU_NAME" redefined [enabled by default]
#define CPU_NAME "MC68VZ328"
^
arch/m68k/kernel/setup_no.c:61:0: note: this is the location of the previous definition
#define CPU_NAME "MC68000"
^
Signed-off-by: Daniel Palmer <danieruru@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Linus Torvalds [Mon, 5 May 2014 22:51:17 +0000 (15:51 -0700)]
Merge tag 'usb-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes and device ids for 3.15-rc4.
All have been in linux-next just fine"
* tag 'usb-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Nokia 5300 should be treated as unusual dev
USB: Nokia 305 should be treated as unusual dev
fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6
usb: storage: shuttle_usbat: fix discs being detected twice
usb: qcserial: add a number of Dell devices
USB: OHCI: fix problem with global suspend on ATI controllers
usb: gadget: at91-udc: fix irq and iomem resource retrieval
usb: phy: fsm: change "|" to "||" for condition OTG_STATE_A_WAIT_BCON at statemachine
usb: phy: fsm: update OTG HNP state transition
Linus Torvalds [Mon, 5 May 2014 22:50:16 +0000 (15:50 -0700)]
Merge tag 'tty-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for things reported
recently"
* tag 'tty-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix lockless tty buffer race
Revert "tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc"
drivers/tty/hvc: don't free hvc_console_setup after init
n_tty: Fix n_tty_write crash when echoing in raw mode
tty: serial: 8250_core.c Bug fix for Exar chips.
Linus Torvalds [Mon, 5 May 2014 22:49:38 +0000 (15:49 -0700)]
Merge tag 'staging-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / iio fixes from Greg KH:
"Here are some small IIO driver fixes for 3.15-rc4 that resolve some
reported issues"
* tag 'staging-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: Nothing in ADC should be a bool CONFIG
iio: exynos_adc: use indio_dev->dev structure to handle child nodes
iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereference
staging:iio:ad2s1200 fix missing parenthesis in a for statment.
Linus Torvalds [Mon, 5 May 2014 22:17:02 +0000 (15:17 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"First, there is a critical fix for the new primary-affinity function
that went into -rc1.
The second batch of patches from Zheng fix a range of problems with
directory fragmentation, readdir, and a few odds and ends for cephfs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: reserve caps for file layout/lock MDS requests
ceph: avoid releasing caps that are being used
ceph: clear directory's completeness when creating file
libceph: fix non-default values check in apply_primary_affinity()
ceph: use fpos_cmp() to compare dentry positions
ceph: check directory's completeness before emitting directory entry
Thomas Petazzoni [Mon, 14 Apr 2014 14:41:18 +0000 (16:41 +0200)]
ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the multi_v7_defconfig
The Marvell Armada 38x platform has a SDHCI interface managed by the
sdhci-pxav3 MMC host driver. It therefore makes sense to enable this
driver in multi_v7_defconfig, which supports the Armada 38x platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
projects / karo-tx-linux.git / log