git.karo-electronics.de Git - karo-tx-linux.git/log

USB: ti_usb_3410_5052: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:25 +0000 (09:21 +0100)]

USB: ssu100: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:24 +0000 (09:21 +0100)]

USB: spcp8x5: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:23 +0000 (09:21 +0100)]

USB: quatech2: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:22 +0000 (09:21 +0100)]

USB: pl2303: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:21 +0000 (09:21 +0100)]

USB: oti6858: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:20 +0000 (09:21 +0100)]

USB: mos7840: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:19 +0000 (09:21 +0100)]

USB: mos7840: fix broken TIOCMIWAIT

Make sure waiting processes are woken on modem-status changes.

Currently processes are only woken on termios changes regardless of
whether the modem status has changed.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:18 +0000 (09:21 +0100)]

USB: mct_u232: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:17 +0000 (09:21 +0100)]

USB: io_ti: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:16 +0000 (09:21 +0100)]

USB: io_edgeport: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:15 +0000 (09:21 +0100)]

USB: ftdi_sio: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

When switching to tty ports, some lifetime assumptions were changed.
Specifically, close can now be called before the final tty reference is
dropped as part of hangup at device disconnect. Even with the ftdi
private-data refcounting this means that the port private data can be
freed while a process is sleeping on modem-status changes and thus
cannot be relied on to detect disconnects when woken up.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:14 +0000 (09:21 +0100)]

USB: f81232: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:13 +0000 (09:21 +0100)]

USB: cypress_m8: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Also remove bogus test for private data pointer being NULL as it is
never assigned in the loop.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:12 +0000 (09:21 +0100)]

USB: ch341: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:11 +0000 (09:21 +0100)]

USB: ark3116: fix use-after-free in TIOCMIWAIT

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:10 +0000 (09:21 +0100)]

USB: serial: add modem-status-change wait queue

Add modem-status-change wait queue to struct usb_serial_port that
subdrivers can use to implement TIOCMIWAIT.

Currently subdrivers use a private wait queue which may have been
released when waking up after device disconnected.

Note that we're adding a new wait queue rather than reusing the tty-port
one as we do not want to get woken up at hangup (yet).

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:09 +0000 (09:21 +0100)]

USB: serial: fix interface refcounting

Make sure the interface is not released before our serial device.

Note that drivers are still not allowed to access the interface in
any way that may interfere with another driver that may have gotten
bound to the same interface after disconnect returns.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:08 +0000 (09:21 +0100)]

USB: io_ti: fix get_icount for two port adapters

Add missing get_icount field to two-port driver.

The two-port driver was not updated when switching to the new icount
interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the
new icount interface").

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit | commitdiff | tree

Johan Hovold [Tue, 19 Mar 2013 08:21:07 +0000 (09:21 +0100)]

USB: garmin_gps: fix memory leak on disconnect

Remove bogus disconnect test introduced by 95bef012e ("USB: more serial
drivers writing after disconnect") which prevented queued data from
being freed on disconnect.

The possible IO it was supposed to prevent is long gone.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux kernel for KaRo TX COM modules

RSS Atom