Felix Fietkau [Thu, 5 Dec 2013 14:20:53 +0000 (15:20 +0100)]
ath9k: fix duration calculation for non-aggregated packets
When not aggregating packets, fi->framelen should be passed in as length
to calculate the duration. Before the tx path rework, ath_tx_fill_desc
was called for either one aggregate, or one single frame, with the
length of the packet or the aggregate as a parameter.
After the rework, ath_tx_sched_aggr can pass a burst of single frames to
ath_tx_fill_desc and sets len=0.
Fix broken duration calculation by overriding the length in ath_tx_fill_desc
before passing it to ath_buf_set_rate.
Cc: stable@vger.kernel.org Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Linus Torvalds [Mon, 9 Dec 2013 17:43:07 +0000 (09:43 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is probably a bit big, but just because I fell behind last week
and didn't get to doing any pulls, so stuff backed up behind me, I
actually should have sent this for -rc3 but failed to even manage
that.
So this has radeon, intel, nouveau, vmware, exynos and tegra fixes in
it, and the line count isn't all the bad in the end"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (50 commits)
drm: fix the addition of the side-by-side (half) flag for extra 3D modes
drm/edid: fix length check when adding extra 3D modes
drm/radeon/atom: fix bus probes when hw_i2c is set (v2)
drm/radeon: fix null pointer dereference in dce6+ audio code
drm/radeon: fixup bad vram size on SI
udl: fix issue with imported prime buffers
drm/vmwgfx: Add our connectors to sysfs
drm/vmwgfx: Fix dma buffer memory size accounting
drm/vmwgfx: Fix up and comment the dumb buffer implementation
drm/vmwgfx: Correctly set the enabled state on crtcs
drm/nv50/disp: min/max are reversed in nv50_crtc_gamma_set()
drm/nouveau/sw: fix oops if gpu has its display block disabled
drm/nouveau: unreference fence after syncing
drm/nouveau/kms: send timestamp data for correct head in flip completion events
drm/nouveau/clk: Add support for NVAA/NVAC
drm/nouveau/fifo: Hook up pause and resume for NV50 and NV84+
drm/nv10/plane: some chipsets don't support NV12
drm/nv10/plane: add downscaling restrictions
drm/nv10/plane: fix format computation
drm/nv04-nv30/clk: provide an empty domain list
...
Linus Torvalds [Mon, 9 Dec 2013 17:30:21 +0000 (09:30 -0800)]
Merge tag 'mfd-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes
Pull mfd fixes from Samuel Ortiz:
"This is the first 3.13 pull request for MFD fixes. We have:
- A ti-ssp build failure fix
- An as3722 build failure fix
- An lpc_ich copy paste error fix"
* tag 'mfd-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
mfd: lpc_ich: Fix Wildcat Point info name field
mfd: ti-ssp: Fix build
mfd: Make MFD_AS3722 depend on I2C=y
Linus Torvalds [Mon, 9 Dec 2013 17:29:42 +0000 (09:29 -0800)]
Merge tag 'pm-3.13-rc3-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixup from Rafael Wysocki:
"This reverts two cpufreq commits that fixed issues for some people,
but broke things for others, so revert them and we'll need to fix the
original problems differently"
* tag 'pm-3.13-rc3-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "cpufreq: fix garbage kobjects on errors during suspend/resume"
Revert "cpufreq: suspend governors on system suspend/hibernate"
Linus Torvalds [Mon, 9 Dec 2013 17:28:31 +0000 (09:28 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"An update to ALPS to support devices on Dell XT2 (hopefully working
better this time around and although it is largish it should not
affect any other ALPS devices) and a tiny update to Elantech driver to
support newer devices as well.
Also a coupe of new input event codes have been defined"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ALPS - add support for DualPoint device on Dell XT2 model
Input: elantech - add support for newer (August 2013) devices
Input: add SW_MUTE_DEVICE switch definition
Input: usbtouchscreen - separate report and transmit buffer size handling
Input: sur40 - suppress false uninitialized variable warning
Input: add key code for ambient light sensor button
Input: keyboard - "keycode & KEY_MAX" changes some keycode values
Pull crypto fix from Herbert Xu:
"Unfortunately the last push that fixed a crash in the crypto
scatterwalk code introduced a new crash when SG debugging is enabled.
This fixes that"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: scatterwalk - Use sg_chain_ptr on chain entries
Tom Lendacky [Thu, 5 Dec 2013 19:09:53 +0000 (13:09 -0600)]
crypto: scatterwalk - Use sg_chain_ptr on chain entries
Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page
call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is
enabled. Use sg_chain_ptr instead of sg_page on a chain entry.
Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Mon, 9 Dec 2013 02:49:05 +0000 (18:49 -0800)]
Merge tag 'staging-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some bugfixes for the staging and IIO drivers for 3.13-rc3.
The resolve the vm memory issue in the tidspbridge driver, fix a
much-reported build failure in an ARM driver, and some other IIO
bugfixes that have been reported"
* tag 'staging-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: TIDSPBRIDGE: Use vm_iomap_memory for mmap-ing instead of remap_pfn_range
Fix build failure for gp2ap020a00f.c
iio: hid-sensors: Fix power and report state
HID: hid-sensor-hub: Add logical min and max
Linus Torvalds [Mon, 9 Dec 2013 02:47:25 +0000 (18:47 -0800)]
Merge tag 'char-misc-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Nothing huge, just a few small bugfixes for problems reported, and a
device id update"
* tag 'char-misc-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: add 9 series PCH mei device ids
drivers/char/i8k.c: add Dell XPLS L421X
MAINTAINERS: add HSI subsystem
misc: mic: Suppress memory space sparse warnings
misc: mic: Fix endianness issues.
misc: mic: Fix user space namespace pollution from mic_common.h.
misc: mic: Bug fix for sysfs poll usage.
misc: mic: Minor bug fix in 'retry' loops.
misc: mic: Change mic_notify(...) to return true.
extcon: remove freed groups caused the panic or warning in unregister flow
extcon: arizona: Get pdata from arizona structure not device
Linus Torvalds [Mon, 9 Dec 2013 02:46:32 +0000 (18:46 -0800)]
Merge tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of USB fixes for 3.13-rc3.
Nothing major, but we seem to have an argument about a XHCI fix, so
I'm not including a revert that Sarah requested, because that breaks a
USB network driver, and I can't revert the USB network driver fix
without reintroducing other bugs that it fixed. So as it is,
everything should now be working. Worse case, I can revert the XHCI
fix before 3.13-final is out, but it seems to work well here with my
testing, so all should be good.
Other than that, some driver updates based on reports"
* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
usb: ohci-pxa27x: include linux/dma-mapping.h
USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
usb: tools: fix a regression issue that gcc can't link to pthread
USB: switch maintainership of chipidea to Peter
USB: pl2303: fixed handling of CS5 setting
USB: ftdi_sio: fixed handling of unsupported CSIZE setting
USB: mos7840: correct handling of CS5 setting
USB: spcp8x5: correct handling of CS5 setting
usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
usb: wusbcore: do device lookup while holding the hc mutex
usb: wusbcore: send keepalives to unauthenticated devices
USB: option: support new huawei devices
USB: serial: option: blacklist interface 1 for Huawei E173s-6
usb: xhci: Link TRB must not occur within a USB payload burst
usb: gadget: f_mass_storage: call try_to_freeze only when its safe
usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
usb: gadget: ffs: fix sparse warning
usb: gadget: zero: module parameters can be static
usb: gadget: storage: fix sparse warning
...
Linus Torvalds [Mon, 9 Dec 2013 02:45:55 +0000 (18:45 -0800)]
Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 fixes from Catalin Marinas:
- Page table fixes (PROT_NONE, shareability attribute, TLB
invalidation)
- Secondary CPUs entry endianness fix
- Make NR_CPUS default to 8
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: mm: Fix PMD_SECT_PROT_NONE definition
arm64: Fix memory shareability attribute for ioremap_wc/cache
arm64: kernel: add code to set cpu boot mode to secondary_entry shim
arm64: make default NR_CPUS 8
arm64: ensure completion of TLB invalidatation
Tejun Heo [Wed, 4 Dec 2013 14:20:40 +0000 (09:20 -0500)]
sysfs: give different locking key to regular and bin files
027a485d12e0 ("sysfs: use a separate locking class for open files
depending on mmap") assigned different lockdep key to
sysfs_open_file->mutex depending on whether the file implements mmap
or not in an attempt to avoid spurious lockdep warning caused by
merging of regular and bin file paths.
While this restored some of the original behavior of using different
locks (at least lockdep is concerned) for the different clases of
files. The restoration wasn't full because now the lockdep key
assignment depends on whether the file has mmap or not instead of
whether it's a regular file or not.
This means that bin files which don't implement mmap will get assigned
the same lockdep class as regular files. This is problematic because
file_operations for bin files still implements the mmap file operation
and checking whether the sysfs file actually implements mmap happens
in the file operation after grabbing @sysfs_open_file->mutex. We
still end up adding locking dependency from mmap locking to
sysfs_open_file->mutex to the regular file mutex which triggers
spurious circular locking warning.
Fix it by restoring the original behavior fully by differentiating
lockdep key by whether the file is regular or bin, instead of the
existence of mmap.
Revert "cpufreq: fix garbage kobjects on errors during suspend/resume"
Commit 2167e2399dc5 (cpufreq: fix garbage kobjects on errors during
suspend/resume) breaks suspend/resume on Martin Ziegler's system
(hard lockup during resume), so revert it.
Fixes: 2167e2399dc5 (cpufreq: fix garbage kobjects on errors during suspend/resume)
References: https://bugzilla.kernel.org/show_bug.cgi?id=66751 Reported-by: Martin Ziegler <ziegler@uni-freiburg.de> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert "cpufreq: suspend governors on system suspend/hibernate"
Commit 5a87182aa21d (cpufreq: suspend governors on system
suspend/hibernate) causes hibernation problems to happen on
Bjørn Mork's and Paul Bolle's systems, so revert it.
Fixes: 5a87182aa21d (cpufreq: suspend governors on system suspend/hibernate) Reported-by: Bjørn Mork <bjorn@mork.no> Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Khalid Aziz [Wed, 27 Nov 2013 22:19:25 +0000 (15:19 -0700)]
PCI: Disable Bus Master only on kexec reboot
Add a flag to tell the PCI subsystem that kernel is shutting down in
preparation to kexec a kernel. Add code in PCI subsystem to use this flag
to clear Bus Master bit on PCI devices only in case of kexec reboot.
This fixes a power-off problem on Acer Aspire V5-573G and likely other
machines and avoids any other issues caused by clearing Bus Master bit on
PCI devices in normal shutdown path. The problem was introduced by b566a22c2332 ("PCI: disable Bus Master on PCI device shutdown").
This patch is based on discussion at
http://marc.info/?l=linux-pci&m=138425645204355&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63861 Reported-by: Chang Liu <cl91tp@gmail.com> Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: stable@vger.kernel.org # v3.5+
Michael Dalton [Thu, 5 Dec 2013 21:14:05 +0000 (13:14 -0800)]
virtio-net: free bufs correctly on invalid packet length
When a packet with invalid length arrives, ensure that the packet
is freed correctly if mergeable packet buffers and big packets
(GUEST_TSO4) are both enabled.
Signed-off-by: Michael Dalton <mwdalton@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ezequiel Garcia [Thu, 5 Dec 2013 16:35:37 +0000 (13:35 -0300)]
net: mvneta: Fix incorrect DMA unmapping size
The current code unmaps the DMA mapping created for rx skb_buff's by
using the data_size as the the mapping size. This is wrong since the
correct size to specify should match the size used to create the mapping.
This commit removes the following DMA_API_DEBUG warning:
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:887 check_unmap+0x3a8/0x860()
mvneta d0070000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eb80000] [map size=1600 bytes] [unmap size=66 bytes]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-01444-ga88ae13-dirty #92
[<c0013600>] (unwind_backtrace+0x0/0xf8) from [<c0010fb8>] (show_stack+0x10/0x14)
[<c0010fb8>] (show_stack+0x10/0x14) from [<c001afa0>] (warn_slowpath_common+0x48/0x68)
[<c001afa0>] (warn_slowpath_common+0x48/0x68) from [<c001b01c>] (warn_slowpath_fmt+0x30/0x40)
[<c001b01c>] (warn_slowpath_fmt+0x30/0x40) from [<c018d0fc>] (check_unmap+0x3a8/0x860)
[<c018d0fc>] (check_unmap+0x3a8/0x860) from [<c018d734>] (debug_dma_unmap_page+0x64/0x70)
[<c018d734>] (debug_dma_unmap_page+0x64/0x70) from [<c0233f78>] (mvneta_rx+0xec/0x468)
[<c0233f78>] (mvneta_rx+0xec/0x468) from [<c023436c>] (mvneta_poll+0x78/0x16c)
[<c023436c>] (mvneta_poll+0x78/0x16c) from [<c02db468>] (net_rx_action+0x94/0x160)
[<c02db468>] (net_rx_action+0x94/0x160) from [<c0021e68>] (__do_softirq+0xe8/0x1d0)
[<c0021e68>] (__do_softirq+0xe8/0x1d0) from [<c0021ff8>] (do_softirq+0x4c/0x58)
[<c0021ff8>] (do_softirq+0x4c/0x58) from [<c0022228>] (irq_exit+0x58/0x90)
[<c0022228>] (irq_exit+0x58/0x90) from [<c000e7c8>] (handle_IRQ+0x3c/0x94)
[<c000e7c8>] (handle_IRQ+0x3c/0x94) from [<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4)
[<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4) from [<c000dc20>] (__irq_svc+0x40/0x50)
Exception stack(0xc04f1f70 to 0xc04f1fb8)
1f60: c1fe46f80000000000001d9200001d92
1f80: c04f0000c04f0000c04f84a4c03e081cc05220e700000001c05220e7c04f0000
1fa0: 00000000c04f1fb8c000eaf8c004c04860000113ffffffff
[<c000dc20>] (__irq_svc+0x40/0x50) from [<c004c048>] (cpu_startup_entry+0x54/0x128)
[<c004c048>] (cpu_startup_entry+0x54/0x128) from [<c04c1a14>] (start_kernel+0x29c/0x2f0)
[<c04c1a14>] (start_kernel+0x29c/0x2f0) from [<00008074>] (0x8074)
---[ end trace d4955f6acd178110 ]---
Mapped at:
[<c018d600>] debug_dma_map_page+0x4c/0x11c
[<c0235d6c>] mvneta_setup_rxqs+0x398/0x598
[<c0236084>] mvneta_open+0x40/0x17c
[<c02dbbd4>] __dev_open+0x9c/0x100
[<c02dbe58>] __dev_change_flags+0x7c/0x134
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 5 Dec 2013 15:27:37 +0000 (16:27 +0100)]
br: fix use of ->rx_handler_data in code executed on non-rx_handler path
br_stp_rcv() is reached by non-rx_handler path. That means there is no
guarantee that dev is bridge port and therefore simple NULL check of
->rx_handler_data is not enough. There is need to check if dev is really
bridge port and since only rcu read lock is held here, do it by checking
->rx_handler pointer.
Note that synchronize_net() in netdev_rx_handler_unregister() ensures
this approach as valid.
Reported-by: Laine Stump <laine@redhat.com> Debugged-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Vagin [Thu, 5 Dec 2013 14:36:21 +0000 (18:36 +0400)]
virtio: delete napi structures from netdev before releasing memory
free_netdev calls netif_napi_del too, but it's too late, because napi
structures are placed on vi->rq. netif_napi_add() is called from
virtnet_alloc_queues.
Fixes: 986a4f4d452d (virtio_net: multiqueue support) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Vagin [Thu, 5 Dec 2013 14:36:20 +0000 (18:36 +0400)]
virtio-net: determine type of bufs correctly
free_unused_bufs must check vi->mergeable_rx_bufs before
vi->big_packets, because we use this sequence in other places.
Otherwise we allocate buffer of one type, then free it as another
type.
Fixes: 2613af0ed18a (virtio_net: migrate mergeable rx buffers to page frag allocators) Cc: Michael Dalton <mwdalton@google.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
There's an issue when showing the value of packets_per_slave due to
using signed integer. The value may be < 0 and thus not put through
reciprocal_value() before showing. This patch makes it use unsigned
integer when showing it.
CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath Kotur [Thu, 5 Dec 2013 06:38:16 +0000 (12:08 +0530)]
be2net: Free/delete pmacs (in be_clear()) only if they exist
During suspend-resume and lancer error recovery we will cleanup and
re-initialize the resources through be_clear() and be_setup() respectively.
During re-initialisation in be_setup(), if be_get_config() fails, we'll again
call be_clear() which will cause a NULL pointer dereference as adapter->pmac_id is
already freed.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath Kotur [Thu, 5 Dec 2013 06:37:55 +0000 (12:07 +0530)]
be2net: Fix Lancer error recovery to distinguish FW download
The Firmware update would be detected by looking at the sliport_error1/
sliport_error2 register values(0x02/0x00). If its not a FW reset the current
messaging would take place. If the error is due to FW reset, log a message to
user that "Firmware update in progress" and also do not log sliport_status and
sliport_error register values.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Catalin Marinas [Thu, 5 Dec 2013 16:56:50 +0000 (16:56 +0000)]
arm64: Fix memory shareability attribute for ioremap_wc/cache
Write-combine and cacheable mappings use Normal memory on arm64. On SMP
systems, the pte needs the shareability bit which is set in
pgprot_default. Use this for defining PROT_DEFAULT used by ioremap_wc
and ioremap_cache (Device memory is shareable by default, does not need
additional attributes).
arm64: kernel: add code to set cpu boot mode to secondary_entry shim
The refactoring of el2_setup split code setting up EL2 and detecting the
CPU boot mode in separate chunks. This allows the code that sets up EL2 to
run in an endian independent way - ie before the endianess is set up in
the respective sctlr registers.
This patch brings secondary_entry up-to-date so that CPUs entering the
kernel through this code path set-up EL2 and the cpu boot mode properly.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Mark Rutland <mark.rutand@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Mon, 2 Dec 2013 16:11:00 +0000 (16:11 +0000)]
arm64: ensure completion of TLB invalidatation
Currently there is no dsb between the tlbi in __cpu_setup and the write
to SCTLR_EL1 which enables the MMU in __turn_mmu_on. This means that the
TLB invalidation is not guaranteed to have completed at the point
address translation is enabled, leading to a number of possible issues
including incorrect translations and TLB conflict faults.
This patch moves the tlbi in __cpu_setup above an existing dsb used to
synchronise I-cache invalidation, ensuring that the TLBs have been
invalidated at the point the MMU is enabled.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 6 Dec 2013 16:34:16 +0000 (08:34 -0800)]
Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A regression showed up that there's a large delay when enabling all
events. This was prevalent when FTRACE_SELFTEST was enabled which
enables all events several times, and caused the system bootup to
pause for over a minute.
This was tracked down to an addition of a synchronize_sched()
performed when system call tracepoints are unregistered.
The synchronize_sched() is needed between the unregistering of the
system call tracepoint and a deletion of a tracing instance buffer.
But placing the synchronize_sched() in the unreg of *every* system
call tracepoint is a bit overboard. A single synchronize_sched()
before the deletion of the instance is sufficient"
* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Only run synchronize_sched() at instance deletion time
Linus Torvalds [Fri, 6 Dec 2013 16:30:18 +0000 (08:30 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of nine fixes (and one author update).
The libsas one should fix discovery in eSATA devices, the WRITE_SAME
one is the largest, but it should fix a lot of problems we've been
getting with the emulated RAID devices (they've been effectively lying
about support and then firmware has been choking on the commands).
The rest are various crash, hang or warn driver fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] bfa: Fix crash when symb name set for offline vport
[SCSI] enclosure: fix WARN_ON in dual path device removing
[SCSI] pm80xx: Tasklets synchronization fix.
[SCSI] pm80xx: Resetting the phy state.
[SCSI] pm80xx: Fix for direct attached device.
[SCSI] pm80xx: Module author addition
[SCSI] hpsa: return 0 from driver probe function on success, not 1
[SCSI] hpsa: do not discard scsi status on aborted commands
[SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
[SCSI] libsas: fix usage of ata_tf_to_fis
Linus Torvalds [Fri, 6 Dec 2013 16:28:35 +0000 (08:28 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull IMA fixes from James Morris:
"Here are two more fixes for IMA"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: properly free ima_template_entry structures
ima: Do not free 'entry' before it is initialized
Linus Torvalds [Fri, 6 Dec 2013 16:27:47 +0000 (08:27 -0800)]
Merge tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Various DT binding documentation updates
- Add Kumar Gala and remove Stephen Warren as DT binding maintainers
* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt: binding: reword PowerPC 8xxx GPIO documentation
ARM: tegra: delete nvidia,tegra20-spi.txt binding
hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)
of: add vendor prefix for GMT
clk: exynos: Fix typos in DT bindings documentation
of: Add vendor prefix for LG Corporation
Documentation: net: fsl-fec.txt: Add phy-supply entry
ARM: dts: doc: Document missing binding for omap5-mpu
dt-bindings: add ARMv8 PMU binding
MAINTAINERS: remove swarren from DT bindings
MAINTAINERS: Add Kumar to Device Tree Binding maintainers group
Gu Zheng [Wed, 4 Dec 2013 10:19:06 +0000 (18:19 +0800)]
aio: clean up aio ring in the fail path
Clean up the aio ring file in the fail path of aio_setup_ring
and ioctx_alloc. And maybe it can fix the GPF issue reported by
Dave Jones:
https://lkml.org/lkml/2013/11/25/898
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Russell King [Fri, 6 Dec 2013 12:30:42 +0000 (12:30 +0000)]
ARM: another fix for the DMA mapping checks
Peter reports that OMAP audio broke with the recent fix for these
checks, caused by OMAP audio using a 64-bit DMA mask. We should
allow 64-bit DMA masks even with 32-bit dma_addr_t if we can be sure
the amount of RAM we have won't allow the 32-bit dma_addr_t to
overflow. Unfortunately, the checks to detect overflow were not
correct.
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
I've tested the old Dell Vostro 131 with the latest generic parser
and it works just fine, and as a bonus we get better jack detection
features in userspace. Therefore this quirk can be removed.
Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
net: clear local_df when passing skb between namespaces
We must clear local_df when passing the skb between namespaces as the
packet is not local to the new namespace any more and thus may not get
fragmented by local rules. Fred Templin noticed that other namespaces
do fragment IPv6 packets while forwarding. Instead they should have send
back a PTB.
The same problem should be present when forwarding DF-IPv4 packets
between namespaces.
Reported-by: Templin, Fred L <Fred.L.Templin@boeing.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 6 Dec 2013 02:26:40 +0000 (18:26 -0800)]
Merge tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- cpufreq regression fix from Bjørn Mork restoring the pre-3.12
behavior of the framework during system suspend/hibernation to avoid
garbage sysfs files from being left behind in case of a suspend error
- PNP regression fix to restore the correct states of devices after
resume from hibernation broken in 3.12. From Dmitry Torokhov.
- cpuidle fix to prevent cpuidle device unregistration from crashing
due to a NULL pointer dereference if cpuidle has been disabled from
the kernel command line. From Konrad Rzeszutek Wilk.
- intel_idle fix for the C6 state definition on Intel Avoton/Rangeley
processors from Arne Bockholdt.
- Power capping framework fix to make the energy_uj sysfs attribute
work in accordance with the documentation. From Srinivas Pandruvada.
- epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has
been compiled with CONFIG_PM_SLEEP unset (in which case that flag
should not have any effect). From Amit Pundir.
- cpufreq fix to prevent governor sysfs files from being lost over
system suspend/resume in some (arguably unusual) situations. From
Viresh Kumar.
* tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PowerCap: Fix mode for energy counter
PNP: fix restoring devices after hibernation
cpuidle: Check for dev before deregistering it.
epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled
cpufreq: fix garbage kobjects on errors during suspend/resume
cpufreq: suspend governors on system suspend/hibernate
intel_idle: Fixed C6 state on Avoton/Rangeley processors
tcp_memcontrol: Cleanup/fix cg_proto->memory_pressure handling.
kill memcg_tcp_enter_memory_pressure. The only function of
memcg_tcp_enter_memory_pressure was to reduce deal with the
unnecessary abstraction that was tcp_memcontrol. Now that struct
tcp_memcontrol is gone remove this unnecessary function, the
unnecessary function pointer, and modify sk_enter_memory_pressure to
set this field directly, just as sk_leave_memory_pressure cleas this
field directly.
This fixes a small bug I intruduced when killing struct tcp_memcontrol
that caused memcg_tcp_enter_memory_pressure to never be called and
thus failed to ever set cg_proto->memory_pressure.
Remove the cg_proto enter_memory_pressure function as it now serves
no useful purpose.
Don't test cg_proto->memory_presser in sk_leave_memory_pressure before
clearing it. The test was originally there to ensure that the pointer
was non-NULL. Now that cg_proto is not a pointer the pointer does not
matter.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Wed, 4 Dec 2013 17:06:51 +0000 (18:06 +0100)]
forcedeth: run loopback test only on chipsets that support it
The driver incorrectly run loopback test on chips that don't support it.
Loopback test is only supported by chips that has DEV_HAS_TEST_EXTENDED
flag and returns 4 (NV_TEST_COUNT_EXTENDED) as test count.
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dingtianhong [Wed, 4 Dec 2013 10:59:31 +0000 (18:59 +0800)]
bonding: add arp_ip_target checks when install the module
When I install the bonding with the wrong arp_ip_target,
just like arp_ip_target=500.500.500.500, the arp_ip_target
was transfored to 245.245.245.244 and stored in the ip
target success, it is uncorrect, so I add checks to avoid
adding wrong address.
The in4_pton() will set wrong ip address to 0.0.0.0 and
return 0, also use the micro IS_IP_TARGET_UNUSABLE_ADDRESS
to simplify the code.
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Wed, 4 Dec 2013 10:04:54 +0000 (12:04 +0200)]
bnx2x: avoid null pointer dereference when enabling SR-IOV
Fixed NULL pointer dereference when dynamically activating SR-IOV after vf
database failed to be allocated in probe stage (for example due to no ARI
support in pci hub).
Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wangweidong [Wed, 4 Dec 2013 09:32:39 +0000 (17:32 +0800)]
sctp: disable max_burst when the max_burst is 0
As Michael pointed out that when max_burst is 0, it just disable
max_burst. It declared in rfc6458#section-8.1.24. so add the check
in sctp_transport_burst_limited, when it 0, just do nothing.
Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Suggested-by: Michael Tuexen <Michael.Tuexen@lurchi.franken.de> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lindgren [Tue, 3 Dec 2013 23:13:02 +0000 (15:13 -0800)]
net: davinci_emac: Fix platform data handling and make usable for am3517
When booted with device tree, we may still have platform data passed
as auxdata. For am3517 this is needed for passing the interrupt_enable
and interrupt_disable callbacks that access the omap system control module
registers. These callback functions will eventually go away when we have
a separate system control module driver.
Some of the things that are currently passed as platform data we don't need
to set up as device tree properties as they are always the same on am3517.
So let's use a new compatible flag for those so we can get those from
the device tree match data.
Also note that we need to fix setting of phy_dev to NULL instead of an empty
string as the code later on uses that to find the first phy on the mdio bus.
This seems to have been caused by 5d69e0076a72 (net: davinci_emac: switch to
new mdio).
Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Durrant [Tue, 3 Dec 2013 17:39:29 +0000 (17:39 +0000)]
xen-netback: fix fragment detection in checksum setup
The code to detect fragments in checksum_setup() was missing for IPv4 and
too eager for IPv6. (It transpires that Windows seems to send IPv6 packets
with a fragment header even if they are not a fragment - i.e. offset is zero,
and M bit is not set).
This patch also incorporates a fix to callers of maybe_pull_tail() where
skb->network_header was being erroneously added to the length argument.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com>
cc: David Miller <davem@davemloft.net> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 6 Dec 2013 00:29:26 +0000 (19:29 -0500)]
Merge branch 'net_sched_actions'
Jamal Hadi Salim says:
====================
net_sched: actions - Add default lookup and walker
This set of patches provide defaults for lookup and walkers for actions.
Users can override when needed.
It also enforces mandatory action methods to be passed.
Thanks to David Miller who paid attention and made this patch set
much better.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 5 Dec 2013 23:33:27 +0000 (15:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current series. It contains:
- A fix for a use-after-free of a request in blk-mq. From Ming Lei
- A fix for a blk-mq bug that could attempt to dereference a NULL rq
if allocation failed
- Two xen-blkfront small fixes
- Cleanup of submit_bio_wait() type uses in the kernel, unifying
that. From Kent
- A fix for 32-bit blkg_rwstat reading. I apologize for this one
looking mangled in the shortlog, it's entirely my fault for missing
an empty line between the description and body of the text"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: fix use-after-free of request
blk-mq: fix dereference of rq->mq_ctx if allocation fails
block: xen-blkfront: Fix possible NULL ptr dereference
xen-blkfront: Silence pfn maybe-uninitialized warning
block: submit_bio_wait() conversions
Update of blkg_stat and blkg_rwstat may happen in bh context
Linus Torvalds [Thu, 5 Dec 2013 21:05:48 +0000 (13:05 -0800)]
Merge tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Stable fix for a NFSv4.1 delegation and state recovery deadlock
- Stable fix for a loop on irrecoverable errors when returning
delegations
- Fix a 3-way deadlock between layoutreturn, open, and state recovery
- Update the MAINTAINERS file with contact information for Trond
Myklebust
- Close needs to handle NFS4ERR_ADMIN_REVOKED
- Enabling v4.2 should not recompile nfsd and lockd
- Fix a couple of compile warnings
* tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: fix do_div() warning by instead using sector_div()
MAINTAINERS: Update contact information for Trond Myklebust
NFSv4.1: Prevent a 3-way deadlock between layoutreturn, open and state recovery
SUNRPC: do not fail gss proc NULL calls with EACCES
NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED
NFSv4: Update list of irrecoverable errors on DELEGRETURN
NFSv4 wait on recovery for async session errors
NFS: Fix a warning in nfs_setsecurity
NFS: Enabling v4.2 should not recompile nfsd and lockd
David S. Miller [Thu, 5 Dec 2013 21:02:56 +0000 (16:02 -0500)]
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
Please pull this batch of fixes intende for the 3.13 stream!
For the mac80211 bits, Johannes says:
"For now I have various fixes all over, mostly for issues introduced in
relatively recent patches. There's no real pattern to it. Some of the
issues like go back longer, but still seemed 3.13 material."
And...
"These are just two patches disabling the broken CSA code. Once this
goes into your tree I'll merge it into mac80211-next and revert there
(since we fixed the bugs there)."
For the iwlwifi bits, Emmanuel says:
"I have here a few fixes for BT Coex. One of them is a NULL pointer
dereference. Another one avoids to enable a feature that can make the
firmware unhappy since the firmware isn't ready for it yet. WE also
avoid a WARNING that can be triggered upon association in not-so-bad
cases even if the association succeeded. We add support for new NICs
(not yet on the market) and bump the API so that 3.13 will be able to
work with the new firmware that will be out soon hopefully.
I also have a boundary check from Johannes."
In addition to those...
- Arend van Spriel fixes a brcmfmac problem that could use an
uninitialized variable in an error path.
- Borislav Petkov fixes a Kconfig-based build breakage problem for
brcmsmac.
- Michal Nazarewicz fixes a couple of NULL pointer dereference problems
in ath9k and wcn36xx.
- Sujith Manoharan fixes a couple of ath9k problems related to
incorrect interpretation of EEPROM configuration data.
- Ujjal Roy fixes a memory leak in mwifiex.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Thu, 5 Dec 2013 20:36:54 +0000 (15:36 -0500)]
ftrace: default to tilegx if ARCH=tile is specified
This matches the existing behavior in arch/tile/Makefile for defconfig.
Reported-by: fengguang.wu@intel.com Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Tony Lu <zlu@tilera.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Yunkang Tang [Mon, 2 Dec 2013 06:33:52 +0000 (22:33 -0800)]
Input: ALPS - add support for DualPoint device on Dell XT2 model
The device uses special MPU controller that necessitates the new
initialization sequence for the device. We also define a new protocol for
the trackpad that allows reporting better resolution than older V2
protocol.
Matt Walker [Thu, 5 Dec 2013 20:39:02 +0000 (12:39 -0800)]
Input: elantech - add support for newer (August 2013) devices
Added detection for newer Elantech touchpads, so that kernel doesn't
fall-back to default PS/2 driver. Supports touchpads released after
~August 2013. Fixes bug:
https://lists.launchpad.net/kernel-packages/msg18481.html
Tested on an Acer Aspire S7-392-6302.
Signed-off by: Matt Walker <matt.g.d.walker@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ping Cheng [Thu, 5 Dec 2013 20:42:09 +0000 (12:42 -0800)]
Input: add SW_MUTE_DEVICE switch definition
Some devices, such as new Intuos series tablets, have a hardware switch to
turn touch data on/off. To report the state, SW_MUTE_DEVICE is added
in include/uapi/linux/input.h.
Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix the following warning when optimizing for size with gcc-4.6.4:
sound/usb/mixer_quirks.c:1514:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
Steven Rostedt [Tue, 3 Dec 2013 17:41:20 +0000 (12:41 -0500)]
tracing: Only run synchronize_sched() at instance deletion time
It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.
This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.
The synchornize_sched() was added with d562aff93bfb53 "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).
The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.
Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.
Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home Reported-by: Petr Mladek <pmladek@suse.cz> Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Acked-by: Petr Mladek <pmladek@suse.cz> Tested-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Thu, 5 Dec 2013 17:55:20 +0000 (09:55 -0800)]
Merge tag 'fbdev-fixes-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull minor fbdev fixes from Tomi Valkeinen.
* tag 'fbdev-fixes-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: vt8500: fix error handling in probe()
atmel_lcdfb: fix module autoload
fbdev: sh_mobile_meram: Fix defined but not used compiler warnings
video: kyro: fix incorrect sizes when copying to userspace
ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance
Linus Torvalds [Thu, 5 Dec 2013 17:54:35 +0000 (09:54 -0800)]
Merge tag 'sound-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A usual pattern of half ASoC and half HD-audio fixes, although
HD-audio fixups have more volumes, in addition to a couple of trivial
fixes. Nothing to worry much is found here.
For ASoC side: a few fixes for PCM rate constraints calculations,
regmap byte-order fix, the rest driver specific fixes (atmel, fsl,
omap, kirkwood, wm codecs).
For HD-audio: Dell headset and mono out fix, ELD update in polling
mode, ALC283 Chromebook fixes, a few fixes for old AD codecs and
MBA2, one regression fix"
* tag 'sound-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda - Fix silent output on MacBook Air 2,1
ALSA: hda - Fix missing ELD info when using jackpoll_ms parameter
ALSA: hda/realtek - remove hp_automute_hook from alc283_fixup_chromebook
ASoC: wm8731: fix dsp mode configuration
ALSA: hda/realtek - Independent of model for HP
ALSA: hda - Fix headset mic input after muted internal mic (Dell/Realtek)
ALSA: hda - Use always amps for auto-mute on AD1986A codec
ALSA: hda/analog - Handle inverted EAPD properly in vmaster hook
ALSA: hda - Another fixup for ASUS laptop with ALC660 codec
ALSA: atmel: Fix possible array overflow
ALSA: hda - Fix complete_all() timing in deferred probes
ALSA: hda - Fix bad EAPD setup for HP machines with AD1984A
ASoC: core: fix devres parameter in devm_snd_soc_register_card()
ASoC: omap: n810: Convert to clk_prepare_enable/clk_disable_unprepare
ASoC: fsl: set correct platform drvdata in pcm030_fabric_probe()
ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation
ALSA: hda - Fix silent output on ASUS W7J laptop
ASoC: core: Use consistent byte ordering in snd_soc_bytes_get
ALSA: dice: fix array limits in dice_proc_read()
...
Linus Torvalds [Thu, 5 Dec 2013 05:45:21 +0000 (21:45 -0800)]
Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and EFI fixes from Peter Anvin:
"Half of these are EFI-related:
The by far biggest change is the change to hold off the deletion of a
sysfs entry while a backend scan is in progress. This is to avoid
calling kmemdup() while under a spinlock.
The other major change is for each entry in the EFI pstore backend to
get a unique identifier, as required by the pstore filesystem proper.
The other changes are:
A fix to the recent consolidation and optimization of using "asm goto"
with read-modify-write operation, which broke the bitops; specifically
in such a way that we could end up generating invalid code.
A build hack to make sure we compile with -mno-sse. icc, and most
likely future versions of gcc, can generate SSE instructions unless we
tell it not to.
A comment-only patch to a change the was due in part to an unpublished
erratum; now when the erratum is published we want to add a comment
explaining why"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic, doc: Justification for disabling IO APIC before Local APIC
x86, bitops: Correct the assembly constraints to testing bitops
x86-64, build: Always pass in -mno-sse
efi-pstore: Make efi-pstore return a unique id
x86/efi: Fix earlyprintk off-by-one bug
efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed
Fenghua Yu [Thu, 5 Dec 2013 00:07:49 +0000 (16:07 -0800)]
x86/apic, doc: Justification for disabling IO APIC before Local APIC
Since erratum AVR31 in "Intel Atom Processor C2000 Product Family
Specification Update" is now published, I added a justification
comment for disabling IO APIC before Local APIC, as changed in commit:
522e66464467 x86/apic: Disable I/O APIC before shutdown of the local APIC
Dave Airlie [Thu, 5 Dec 2013 02:18:35 +0000 (12:18 +1000)]
Merge branch 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Some additional fixes for 3.13. Regression fixes for audio and hw_i2c,
vram fix for some SI PX cards, race fix in the hwmon code, and a few other
odds and ends.
* 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/atom: fix bus probes when hw_i2c is set (v2)
drm/radeon: fix null pointer dereference in dce6+ audio code
drm/radeon: fixup bad vram size on SI
drm/radeon: fix VGT_GS_INSTANCE_CNT register
drm/radeon: Fix a typo in Cayman and Evergreen registers
drm/radeon/dpm: simplify state adjust logic for NI
drm/radeon: add radeon_vm_bo_update trace point
drm/radeon: add VMID allocation trace point
drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups
drm/radeon: program DCE2 audio dto just like DCE3
drm/radeon: fix typo in fetching mpll params
As per the documentation of powercap sysfs, energy_uj field is read only,
if it can't be reset. Currently it always allows write but will fail,
if there is no reset callback.
Changing mode field, to read only if there is no reset callback.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reported-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thomas Wood [Thu, 28 Nov 2013 15:35:04 +0000 (15:35 +0000)]
drm: fix the addition of the side-by-side (half) flag for extra 3D modes
Ensure the side-by-side (half) flag is added to any existing flags when
adding modes from 3D_Structure_ALL.
Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Wood [Fri, 29 Nov 2013 15:33:26 +0000 (15:33 +0000)]
drm/edid: fix length check when adding extra 3D modes
Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Julius Werner [Thu, 7 Nov 2013 18:59:14 +0000 (10:59 -0800)]
usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
This patch adds a check for USB_STATE_NOTATTACHED to the
hub_port_warm_reset_required() workaround for ports that end up in
Compliance Mode in hub_events() when trying to decide which reset
function to use. Trying to call usb_reset_device() with a NOTATTACHED
device will just fail and leave the port broken.
Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Mack [Fri, 15 Nov 2013 13:19:02 +0000 (14:19 +0100)]
usb: ohci-pxa27x: include linux/dma-mapping.h
Include linux/dma-mapping.h to make the new functions available that are
used since 22d9d8e83 ("DMA-API: usb: use dma_set_coherent_mask()").
drivers/usb/host/ohci-pxa27x.c: In function ‘ohci_pxa_of_init’:
drivers/usb/host/ohci-pxa27x.c:310:2: error: implicit declaration of function ‘dma_coerce_mask_and_coherent’ [-Werror=implicit-function-declaration]
drivers/usb/host/ohci-pxa27x.c:310:2: error: implicit declaration of function ‘DMA_BIT_MASK’ [-Werror=implicit-function-declaration]
Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / karo-tx-linux.git / log