Mark Einon [Tue, 23 Sep 2014 19:41:11 +0000 (20:41 +0100)]
staging: et131x: zero allocation of fbr to prevent random address access
If et131x_rx_dma_memory_alloc() allocates rx_ring->fbr[0] but fails to
allocate rx_ring->fbr[1], this leaves fbr[0]->ring_virtaddr with the
possibility of being accessed in et131x_rx_dma_memory_free() as it
contains a random value, potentially causing an oops.
Fix this by zeroing the fbr memory on allocation. Subsequent frees of
this fbr memory explicitly zeros the ring_virtaddr value.
imx-drm: imx-drm-core: add basic suspend/resume support
HDMI currently stops working after a system suspend/resume cycle. The
cause is that the mode setting states in hardware gets lost and isn't
restored across the suspend/resume cycle.
The patch adds a very basic suspend/resume support to imx-drm driver,
and calls drm_helper_resume_force_mode() in .resume hook to restore the
mode setting states, so that HDMI can continue working after a system
suspend/resume cycle.
Since the suspend/resume hook can be called with drm_device pointer
being NULL from driver data, we need a check on the pointer in the
hooks. And to avoid using a stale pointer from driver data, it also
clears driver data in .unload hook.
imx-drm: ipuv3-plane: remove function ipu_plane_dpms()
All those ipu_*_put() calls in ipu_plane_dpms() are unnecessary,
because the only occurrence of ipu_plane_dpms() with 'mode' not being
DRM_MODE_DPMS_ON is in function ipu_disable_plane(), which already
has a ipu_plane_put_resources() call to put those ipu resources right
after ipu_plane_dpms().
So with those redundant ipu_*_put() calls removed from ipu_plane_dpms(),
the only left code in the function is ipu_plane_enable|disable(). Thus,
we can just call ipu_plane_enable|disable() as needed directly and
remove the ipu_plane_dpms() function completely.
Staging: rtl8192e: rtl8192e: Merge two lines and remove unused variable
This patch merges an assignment with an immediately following return of
the assigned variable. It also removes variables that became unused due to this transformation.
The following Coccinelle semantic patch was used to make this transformation:
@r@
identifier ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
@@
identifier r.ret;
expression e1;
type t;
@@
(
-t ret = e1;
|
-t ret;
)
... when != ret
when strict
Staging: media: lirc: Merge two lines and remove unused variable
This patch merges an assignment with an immediately following return of
the assigned variable. It also removes a variable that becomes unused due to this transformation.
The following Coccinelle semantic patch was used to make this transformation:
@r@
identifier ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
@@
identifier r.ret;
expression e1;
type t;
@@
(
-t ret = e1;
|
-t ret;
)
... when != ret
when strict
staging: ft1000-pcmcia: replace DEBUG macro with netdev_dbg
This fixes the following checkpatch.pl warning:
WARNING: Prefer [subsystem eg: netdev]_dbg([subsystem]dev, ... then
dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ...
Removing the macro also fixes:
WARNING: macros should not use a trailing semicolon
Staging: vme: devices: Merges two lines of code and removes unused variable
This patch merges an assignment with an immediately following return of
the assigned variable. The following Coccinelle semantic patch was used
to make this transformation:
Staging: rtl8192e: rtl8192e: Merges two lines of code and removes unused variable
This patch merges an assignment with an immediately following return of
the assigned variable. It also removes a variable that becomes unused due to this transformation.
The following Coccinelle semantic patch was used to make this transformation:
This patch merges an assignment with an immediately following return of
the assigned variable. The following Coccinelle semantic patch was used
to make this transformation:
@@
expression ret;
identifier f;
@@
-ret=
+return
f(...);
-return ret;
A variable that became unused due to this transformation was also
removed.
Staging: vt6656: Merges two lines of code and also removes unused variable
This patch merges an assignment with an immediately following return of
the assigned variable. The following Coccinelle semantic patch was used
to make this transformation:
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
A variable that became unused due to this transformation was also removed.
Staging: vt6656: Merges two lines of code and removes unused variable
This patch merges an assignment with an immediately following return of
the assigned variable.The following Coccinelle semantic patch was used to make this transformation:
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
A variable that became unused due to this transformation was also removed.
Benjamin Romer [Mon, 22 Sep 2014 17:45:03 +0000 (13:45 -0400)]
staging: unisys: fix IO memory copy in channel.h
The function ULTRA_check_channel_client() was recently patched to use
ioread8_rep(). Unfortunately the parameters were incorrectly ordered, and this
causes the function to fail and the guest to not boot.
This patch switches the parameters around and uses memcpy_fromio() instead,
which is clearer since a structure is being copied, not an array, and it
fixes the error message printout later in the function that was using the UUID
value in the channel, rather than the value copied from the channel, which
causes a misleading error to be reported.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: speakup: remove jiffies comparison using time_after_eq()
This patch fixes checkpatch.pl warning in files of speakup
WARNING : Comparing jiffies is almost always wrong; prefer time_after,
time_before and friends
Tina Johnson [Sat, 20 Sep 2014 18:38:05 +0000 (00:08 +0530)]
Staging: lustre: Replace GOTO macro with necessary code
The GOTO macro is neither standard in Linux nor does its definiton
contain much useful code. Hence GOTO can be replaced with useful
parts of its definition. In a statement like GOTO(label, rc), the
replacing code will be goto label if rc is a constant or a variable.
But in cases like GOTO(label, e) where e is an assignment statement,
both assignment and goto statements are kept.
This patch was done using Coccinelle and the following semantic
patch was used:
staging: rtl8712: merge lines and remove unused variable for immediate return
This patch merge two lines in a single line if immediate return is found.
Unused variables in each case were removed manually as they are no longer
needed.
This is done using Coccinelle. Semantic patch used for this is as
follows :
@@
expression ret;
identifier f;
@@
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Fixes for ARM, the most notable being the fix from Nathan Lynch to fix
the state of various registers during execve, to ensure that data
can't be leaked between two executables.
Fixes from Victor Kamensky for get_user() on big endian platforms,
since the addition of 8-byte get_user() support broke these fairly
badly.
A fix from Sudeep Holla for affinity setting when hotplugging CPU 0.
A fix from Stephen Boyd for a perf-induced sleep attempt while atomic.
Lastly, a correctness fix for emulation of the SWP instruction on
ARMv7+, and a fix for wrong carry handling when updating the
translation table base address on LPAE platforms"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8149/1: perf: Don't sleep while atomic when enabling per-cpu interrupts
ARM: 8148/1: flush TLS and thumbee register state during exec
ARM: 8151/1: add missing exports for asm functions required by get_user macro
ARM: 8137/1: fix get_user BE behavior for target variable with size of 8 bytes
ARM: 8135/1: Fix in-correct barrier usage in SWP{B} emulation
ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs
ARM: 8132/1: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSET
Merge tag 'media-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"some media bug fixes:
- a Kconfig dependency issue
- some fixes for af9033/it913x demod to be more reliable and address
a performance regression
- cx18: fix an oops on devices with tda8290 tuner
- two new USB IDs for af9035
- a couple fixes on smapp driver"
* tag 'media-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] af9035: new IDs: add support for PCTV 78e and PCTV 79e
[media] af9033: feed clock to RF tuner
[media] it913x: init tuner on attach
[media] af9033: update IT9135 tuner inittabs
[media] Kconfig: do not select SPI bus on sub-driver auto-select
[media] cx18: fix kernel oops with tda8290 tuner
[media] smiapp: Set sub-device owner
[media] smiapp: Fix power count handling
Merge tag 'staging-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO fixes from Greg KH:
"Here are some IIO and Staging driver fixes for 3.17-rc6. They are all
pretty simple, and resolve reported issues"
* tag 'staging-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt6655: buffer overflow in ioctl
iio:magnetometer: bugfix magnetometers gain values
iio: adc: at91: don't use the last converted data register
iio: adc: xilinx-xadc: assign auxiliary channels address correctly
iio: meter: ade7758: Fix indio_dev->trig assignment
iio: inv_mpu6050: Fix indio_dev->trig assignment
iio: gyro: itg3200: Fix indio_dev->trig assignment
iio: st_sensors: Fix indio_dev->trig assignment
iio: hid_sensor_hub: Fix indio_dev->trig assignment
iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment
iio: accel: bma180: Fix indio_dev->trig assignment
iio:trigger: modify return value for iio_trigger_get
iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name
Merge tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes / quirks from Greg KH:
"Here are some USB and PHY fixes and quirks for 3.17-rc6. Nothing
major, just a few things that have been reported"
* tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
USB: EHCI: unlink QHs even after the controller has stopped
phy: spear1340-miphy: fix driver dependencies
phy: spear1310-miphy: fix driver dependencies
phy: miphy365x: Fix off-by-one error
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target pending fixes for v3.17-rc6.
Included are Sagi's long overdue fixes related to iser-target
shutdown, along with a couple of fixes from Sebastian related to ALUA
Referrals changes that when in during the v3.14 time-frame.
Also included are a few iscsi-target fixes, most recently of which
where found during Joern's Coverity scanning of target code"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid
target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE
target: Fix user data segment multiplier in spc_emulate_evpd_b3()
iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup
Target/iser: Fix initiator_depth and responder_resources
Target/iser: Avoid calling rdma_disconnect twice
Target/iser: Don't put isert_conn inside disconnected handler
Target/iser: Get isert_conn reference once got to connected_handler
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of radeon fixes for oops on module unload, and problems with
resetting the dma engine, one nouveau fix for black boxes in rendering
on my mbp retina, one sti fix, and a couple of intel fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
drm/bochs: add missing drm_connector_register call
drm/cirrus: add missing drm_connector_register call
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
drm/nouveau/runpm: fix module unload
drm/radeon/px: fix module unload
vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
drm/radeon: don't reset dma on r6xx-evergreen init
drm/radeon: don't reset sdma on CIK init
drm/radeon: don't reset dma on NI/SI init
drm/radeon/dpm: fix resume on mullins
drm/radeon: Disable HDP flush before every CS again for < r600
drm/radeon: delete unused PTE_* defines
drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv
drm: sti: do not iterate over the info frame array
drm/i915: Fix SRC_COPY width on 830/845g
Ben Skeggs [Sat, 20 Sep 2014 07:39:00 +0000 (17:39 +1000)]
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
A mismatch between FB and LTC's idea of how big a large page is causes
issues such as black "holes" in rendering to occur on some boards
(those where LTC is configured for 64KiB large pages) when compression
is used.
Confirmed to fix at least the GK107 MBP.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sat, 20 Sep 2014 07:23:37 +0000 (17:23 +1000)]
Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
single fix for regression on rs4xx/rs690/rs740
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
projects / linux-beck.git / log