Mike Isely [Sat, 2 May 2009 03:04:35 +0000 (00:04 -0300)]
V4L/DVB (11747): pvrusb2: Bump up version advertised through v4l interface
Kick up the pvrusb2 version number advertised through the v4l
interface. This value really has almost no meaning because I don't
make a serious attempt to version the driver in this manner (otherwise
this one line becomes a nasty hotspot of changes and merge
conflicts). The value that is here is really a historical thing.
However Hans Verkuil thought it might be a good idea to bump up the
number anyway right now since the driver's mechanism for communicating
with the v4l core has pretty much completely changed. Sending out a
Mike Isely [Sat, 2 May 2009 01:33:16 +0000 (22:33 -0300)]
V4L/DVB (11746): pvrusb2: Set ir_video autoloading to default disabled
This sets the disable_autoload_ir_video module option to being set,
which disables any attempt by the driver to autoload IR support. This
changes preserves previous behavior, for now. This change can be set
back concurrent with other changes that finally update i2c-kbd-i2c to
use the new i2c binding model.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 2 May 2009 01:23:39 +0000 (22:23 -0300)]
V4L/DVB (11745): pvrusb2: Update to work with upcoming ir_video changes in v4l-dvb core
The ir-kbd-i2c module is about to be updated to match the new style
i2c binding model. These pvrusb2 changes maintain compatibility with
that change. Note that this does not actually break anything even
without the expected ir-kbd-i2c changes yet because previously the
pvrusb2 didn't autoload ir-kbd-i2c anyway.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Mon, 6 Apr 2009 04:51:38 +0000 (01:51 -0300)]
V4L/DVB (11744): pvrusb2: Select, track, and report IR scheme in use with the device
This change defines all possible "IR schemes" related to the pvrusb2
driver, on a per-device basis. That information is then set according
to the hardware in use. The idea here is to make possible a more
intelligent future decision on which, if any, IR receiver driver might
be loaded during initialization.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Chaithrika U S [Thu, 7 May 2009 12:30:01 +0000 (09:30 -0300)]
V4L/DVB (11743): Analog Devices ADV7343 video encoder driver
Add ADV7343 I2C based video encoder driver. This follows the
v4l2-subdev framework. This driver has been tested on TI DM646x EVM. It
has been tested for Composite and Component outputs.
Updates as per review by Mauro Chehab, added support for more standards
supported by the encoder. Also adding the missed out signed-offs.Tested
only NTSC and PAL standards.
[hverkuil@xs4all.nl: s_routing API changed, updated driver to use new API] Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Chaithrika U S [Thu, 7 May 2009 12:29:25 +0000 (09:29 -0300)]
V4L/DVB (11742): TI THS7303 video amplifier driver code
This patch adds driver for TI THS7303 video amplifier. This driver is
implemented as a v4l2 sub device. Tested on TI DM646x EVM.
This version has updates based on review comments by Mauro Chehab.
Signed-off-by: Chaithrika U S <chaithrika@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (11739): remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Németh Márton [Wed, 29 Apr 2009 18:57:24 +0000 (15:57 -0300)]
V4L/DVB (11736): videobuf: modify return value of VIDIOC_REQBUFS ioctl
The V4L2 ioctls usually return 0 when the operation was successful
and -1 in case of error. Currently VIDIOC_REQBUFS returns the
number of buffers which is redundant because this information is
available in count field of struct v4l2_requestbuffers. The
V4L2 API specification, revision 0.24 [1] explicitly specifies for
VIDIOC_REQBUFS that the return value shall be 0 on success.
The patch was tested with v4l-test 0.13 [2] with vivi driver.
References:
[1] V4L2 API specification, revision 0.24
http://v4l2spec.bytesex.org/spec/r13696.htm
[2] v4l-test: Test environment for Video For Linux Two API
http://v4l-test.sourceforge.net/
Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (11735): Enables the Winfast TV2000 XP Global TV IR
Adds support to the remote control of the Winfast TV2000 XP Global TV
capture card. A case statement was added in order to initialize the
GPIO data structures as well as a case statement for handling the keys
correctly when pressed.
Thanks to Hermann and Mauro for all the help
Signed-off-by: Pieter C van Schaik <vansterpc@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Tue, 28 Apr 2009 09:46:15 +0000 (06:46 -0300)]
V4L/DVB (11734): remove hw reset of MPEG encoder when lost/found seq.
When we capture signal from composite input offen lost and found syncro
sequence. In this case the MPEG coder hardware reset after each
lost/found event. The image has a lot of artefactes. This patch remove
hardware reset of MPEG encoder.
Remove the videobuf-dma-contig sync operation. Sync is only needed
for noncoherent buffers, and since videobuf-dma-contig is built on
coherent memory allocators the memory is by definition always in sync.
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Sun, 26 Apr 2009 08:43:59 +0000 (05:43 -0300)]
V4L/DVB (11723): Link firmware to physical device
Use the physical device rather than the i2c adapter as the reference
device when loading firmwares. This will prevent the sysfs name
collision with i2c-dev that has been reported many times.
I may have missed other drivers which need the same fix.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (11711): gspca - main: Fix a crash when no bandwidth available
When the bandwidth is not wide enough, the transfer endpoint may be set to
the one of the alternate setting 0. This one may be null and this causes a
divide by 0 oops.
Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (11705): soc-camera: prepare for the platform driver conversion
Add a platform driver to soc_camera.c. This way we preserve backwards
compatibility with existing platforms and can start converting them one by one
to the new platform-device soc-camera interface.
Andy Walls [Sun, 3 May 2009 21:01:57 +0000 (18:01 -0300)]
V4L/DVB (11703): cx18: Have audio decoder drive SIF gain control, and rework AFE config
Ensure the variable gain amplifier gain for SIF is driven by the audio deocder
and not the video decoder. This forced rework of the analog front end (AFE)
configuration to not rely on autoconfiguration, but instead set up the AFE mux,
AFE parameters, and ADC1 & ADC2 configurations explicitly.
Reported-by: Helen Buus <mythtv@hbuus.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support for tuners with i2c addresses >= 0x65 is dropped since no tuners
with addresses in the range 0x65-0x6f have been found.
This patch removes addresses 0x65-0x6f from the list of tuner probe addresses,
it removes the kernel warning that warned if addresses in this range appeared,
and it removed a hack for the cx88 that is no longer needed now that the
tuner address range is reduced.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
/home/v4l/master/v4l/radio-si470x.c: In function 'si470x_fops_release':
/home/v4l/master/v4l/radio-si470x.c:1218: warning: label 'unlock' defined but not used
Erik Andrén [Thu, 22 Jan 2009 06:32:32 +0000 (03:32 -0300)]
V4L/DVB (11639): gspca - m5602-mt9m111: Correct the hflip/vflip semantics
mt9m111: Hflip and vflip shall always be 0 at start and the image shall be correctly aligned.
The mt9m111 is hflipped and vflipped by default. Correct the semantics to make this happen.
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 26 Apr 2009 21:46:14 +0000 (18:46 -0300)]
V4L/DVB (11624): cx18: Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register
Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register. It's hard to
reliably tell when we have written to this register successfully unless we
change some bits we know we can read back. The AI mux bits always read back
what we wrote to them, so force them to toggle whenever we have to write to
the register, so we can tell we wrote to the register successfully.
This change was prompted by users experiencing broadcast audio decoding
problems after the cx18 module loads for the first time.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add code to verify the cx18-av-core digitizer firmware loads correctly. The
verification function reads back and compares the firmware bytes loaded
into the A/V core. The result of the verification is only used to log a
message in the system log.
This change was prompted by users with multiple card setups that have problems
with broadcast audio decoding the first time the cx18 module is loaded.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sun, 26 Apr 2009 19:34:36 +0000 (16:34 -0300)]
V4L/DVB (11622): cx18: Allow IVTV format VBI insertion in MPEG-2 SVCD and DVD streams
Both the MPEG-2 SVCD stream format and the MPEG-2 DVD stream format should
use an MPEG-2 PS container. This makes it safe to stuff IVTV Private Stream 1
VBI packets in these stream types using the existing cx18 driver routines.
Reported-by: Helen Buus <mythtv@hbuus.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Wed, 15 Apr 2009 23:45:10 +0000 (20:45 -0300)]
V4L/DVB (11619): cx18: Simplify the work handler for outgoing mailbox commands
Simplify the way outgoing work handler gets scheduled to send empty buffers
back to the firmware for use. Also reduced the memory required for scheduling
this outgoing work, by using a single, per stream work object.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 14 Apr 2009 02:08:00 +0000 (23:08 -0300)]
V4L/DVB (11618): cx18: Convert per stream mutex locks to per queue spin locks
To avoid sleeps in providing buffers to user space and in handling incoming
buffers from the capture unit, converted the per stream mutex for locking
queues to 3 spin locks. There is now a spin lock per queue
to increase concurrency when moving buffers around.
Also simplified queue manipulations and buffer handling of incoming buffers
of data from the capture unit.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 14 Apr 2009 01:53:09 +0000 (22:53 -0300)]
V4L/DVB (11617): cx18: Set up to wait for a one-shot response before sending a firmware cmd
When sending an outgoing firmware command, prepare to wait before we raise the
interrupt, so we don't miss the wake_up() on the acknowledgment. When waiting
for the acknowledgement, there is no need to loop around schedule(), as there
will only be one interrupt, and hence one wake_up(), issued.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 14 Apr 2009 01:42:43 +0000 (22:42 -0300)]
V4L/DVB (11616): cx18: Add a work queue for deferring empty buffer handoffs to the firmware
This change defers sending all CX18_CPU_DE_SET_MDL commands, for a stream with
an ongoing capture, by adding a work queue to handle sending such commands when
needed. This prevents any sleeps, caused by notifying the firmware of new
usable buffers, when a V4L2 application read() is being satisfied or when
an incoming buffer is processed by the cx18-NN-in work queue thread.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Tue, 14 Apr 2009 01:22:40 +0000 (22:22 -0300)]
V4L/DVB (11615): cx18: Rename the work queue to "in_work_queue"
Rename the work queue to "in_work_queue" to indicate it is handling
incoming mailbox commands. This is preparation for adding a work queue
for handling deferrable outgoing mailbox commands.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
V4L/DVB (11611): soc-camera: link host drivers after clients
With the transition of soc-camera to become a platform driver and to the
v4l2-subdev framework the initialisation order becomes important. In case
of a static build clients (i2c) drivers have to be available when host
drivers are probed. Moving host drivers down in the Makefile achieves the
desired order.
Embed struct soc_camera_host in platform-specific per host instance objects
instead of allocating them statically in drivers, use platform_[gs]et_drvdata
consistently, use resource_size().
V4L/DVB (11607): soc-camera: add a free_bus method to struct soc_camera_link
Currently pcm990 camera bus-width management functions request a GPIO and never
free it again. With this approach the GPIO extender driver cannot be unloaded
once camera drivers have been loaded, also unloading theb i2c-pxa bus driver
produces errors, because the GPIO extender driver cannot unregister properly.
Another problem is, that if camera drivers are once loaded before the GPIO
extender driver, the platform code marks the GPIO unavailable and only a reboot
helps to recover. Adding an explicit free_bus method and using it in mt9m001
and mt9v022 drivers fixes these problems.
V4L/DVB (11567): saa7134: Added support for AVerMedia Cardbus Plus
Here comes the full support for AVerMedia Cardbus Plus (E501R) - including
remote control. TV, Composite and FM radio tested, I don't have S-Video to
test. I've figured out that the radio works only with xtal frequency 13MHz.
projects / karo-tx-linux.git / log