where the thaw ioctl deadlocked at thaw_super() when called while chcp was
waiting at nilfs_transaction_begin() called from
nilfs_ioctl_change_cpmode(). This deadlock is 100% reproducible.
This is because nilfs_ioctl_change_cpmode() first locks sb->s_umount in
read mode and then waits for unfreezing in nilfs_transaction_begin(),
whereas thaw_super() locks sb->s_umount in write mode. The locking of
sb->s_umount here was intended to make snapshot mounts and the downgrade
of snapshots to checkpoints exclusive.
This fixes the deadlock issue by replacing the sb->s_umount usage in
nilfs_ioctl_change_cpmode() with a dedicated mutex which protects snapshot
mounts.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: fix timing issue between rmcp and chcp ioctls
The checkpoint deletion ioctl (rmcp ioctl) has potential for breaking
snapshot because it is not fully exclusive with checkpoint mode change
ioctl (chcp ioctl).
The rmcp ioctl first tests if the specified checkpoint is a snapshot or
not within nilfs_cpfile_delete_checkpoint function, and then calls
nilfs_cpfile_delete_checkpoints function to actually invalidate the
checkpoint only if it's not a snapshot. However, the checkpoint can be
changed into a snapshot by the chcp ioctl between these two operations.
In that case, calling nilfs_cpfile_delete_checkpoints() wrongly
invalidates the snapshot, which leads to snapshot list corruption and
snapshot count mismatch.
This fixes the issue by changing nilfs_cpfile_delete_checkpoints() so
that it reconfirms the target checkpoints are snapshot or not.
This second check is exclusive with the chcp operation since it is
protected by an existing semaphore.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nilfs2: remove references to long gone super operations
->delete_inode(), ->write_super_lockfs(), ->unlockfs() are gone so remove
references to them in the NTFS code. Noticed while cleaning up the
fsfreeze mess.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On minix2 and minix3 usually max_size is 7fffffff and the check in
question prohibits creation of last block spanning right before 7fffffff,
due to downward rounding during the division. Fix it by using
multiplication instead.
[akpm@linux-foundation.org: fix up code layout, use local `sb'] Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Bowler [Mon, 30 Jul 2012 21:41:57 +0000 (14:41 -0700)]
drivers/rtc/rtc-pcf8563.c: set owner field in driver struct
The owner member is supposed to be set to the module implementing the
device driver, i.e., THIS_MODULE. This enables the appropriate module
link in sysfs.
Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Mon, 30 Jul 2012 21:41:47 +0000 (14:41 -0700)]
drivers/rtc/rtc-r9701.c: check that r9701_set_datetime() succeeded
When the driver detects that the clock time is invalid, it attempts to
write a sane time into the hardware. We curently assume that everything
is OK if those writes succeeded. But it is better to re-read the time
from the hardware to ensure that the new settings got there OK.
drivers/rtc/rtc-r9701.c: avoid second call to rtc_valid_tm()
r9701_get_datetime() calls rtc_valid_tm() and returns the value returned
by rtc_valid_tm(), which can be used in the `if', so calling
rtc_valid_tm() a second time is not required.
The pl031 interrupt is shared between the timer part and the clockwatch
part of the same HW block on the ux500, so mark it IRQF_SHARED on this
variant.
This patch also adds the IRQF_NO_SUSPEND flag to the rtc irq on all
variants as we don't want this pretty important IRQ to be disabled in
suspend.
rtc: pl031: use per-vendor variables for special init
Instead of hard-checking for certain vendor codes, follow the pattern of
other AMBA (PrimeCell) drivers and use variables in the vendor data.
Get rid of the locally cached vendor and hardware revision since we
already have the nice vendor data variable in the state.
firmware_map: make firmware_map_add_early() argument consistent with firmware_map_add_hotplug()
There are two ways to create /sys/firmware/memmap/X sysfs:
- firmware_map_add_early
When the system starts, it is calledd from e820_reserve_resources()
- firmware_map_add_hotplug
When the memory is hot plugged, it is called from add_memory()
But these functions are called without unifying value of end argument as
below:
- end argument of firmware_map_add_early() : start + size - 1
- end argument of firmware_map_add_hogplug() : start + size
The patch unifies them to "start + size". Even if applying the patch,
/sys/firmware/memmap/X/end file content does not change.
[akpm@linux-foundation.org: clarify comments] Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Boyd [Mon, 30 Jul 2012 21:41:11 +0000 (14:41 -0700)]
spinlock_debug: print offset in addition to symbol name
If there are two spinlocks embedded in a structure that kallsyms knows
about and one of the spinlocks locks up we will print the name of the
containing structure instead of the address of the lock. This is quite
bad, so let's use %pS instead of %ps so we get an offset in addition to
the symbol so we can determine which particular lock is having problems.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Mon, 30 Jul 2012 21:41:08 +0000 (14:41 -0700)]
ext4: use memweight()
Convert ext4_count_free() to use memweight() instead of table lookup
based counting clear bits implementation. This change only affects the
code segments enabled by EXT4FS_DEBUG.
Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary. Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.
This also includes the following change.
- Remove unnecessary map == NULL check in ext4_count_free() which
always takes non-null pointer as the memory area.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Mon, 30 Jul 2012 21:41:06 +0000 (14:41 -0700)]
ext3: use memweight()
Convert ext3_count_free() to use memweight() instead of table lookup
based counting clear bits implementation. This change only affects the
code segments enabled by EXT3FS_DEBUG.
Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary. Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.
This also includes the following changes.
- Remove unnecessary map == NULL check in ext3_count_free() which
always takes non-null pointer as the memory area.
- Fix printk format warning that only reveals with EXT3FS_DEBUG.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Mon, 30 Jul 2012 21:41:05 +0000 (14:41 -0700)]
ext2: use memweight()
Convert ext2_count_free() to use memweight() instead of table lookup
based counting clear bits implementation. This change only affects the
code segments enabled by EXT2FS_DEBUG.
Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary. Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.
This also includes the following changes.
- Remove unnecessary map == NULL check in ext2_count_free() which
always takes non-null pointer as the memory area.
- Fix printk format warning that only reveals with EXT2FS_DEBUG.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Mon, 30 Jul 2012 21:41:03 +0000 (14:41 -0700)]
ocfs2: use memweight()
Use memweight to count the total number of bits set in memory area.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Mon, 30 Jul 2012 21:40:57 +0000 (14:40 -0700)]
qnx4fs: use memweight()
Use memweight() to count the total number of bits clear in memory area.
Note that this memweight() call can't be replaced with a single
bitmap_weight() call, although the pointer to the memory area is aligned
to long-word boundary. Because the size of the memory area may not be a
multiple of BITS_PER_LONG, then it returns wrong value on big-endian
architecture.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Anders Larsen <al@alarsen.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Mon, 30 Jul 2012 21:40:55 +0000 (14:40 -0700)]
string: introduce memweight()
memweight() is the function that counts the total number of bits set in
memory area. Unlike bitmap_weight(), memweight() takes pointer and size
in bytes to specify a memory area which does not need to be aligned to
long-word boundary.
[akpm@linux-foundation.org: rename `w' to `ret'] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Anders Larsen <al@alarsen.net> Cc: Alasdair Kergon <agk@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Tony Luck <tony.luck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 30 Jul 2012 21:40:47 +0000 (14:40 -0700)]
backlight: l4f00242t03: export and use devm_gpio_request_one()
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_gpio_request_one() for these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Alberto Panizzo <alberto@amarulasolutions.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 30 Jul 2012 21:40:45 +0000 (14:40 -0700)]
backlight: corgi_lcd: use devm_gpio_request()
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_gpio_request() for these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 30 Jul 2012 21:40:43 +0000 (14:40 -0700)]
backlight: lms283gf05: use devm_gpio_request()
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_gpio_request() for these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 30 Jul 2012 21:40:37 +0000 (14:40 -0700)]
backlight: ot200_bl: use devm_gpio_request()
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_gpio_request() for these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 30 Jul 2012 21:40:34 +0000 (14:40 -0700)]
drivers/video/backlight/lm3533_bl.c: use devm_ functions
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_kzalloc of these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jingoo Han [Mon, 30 Jul 2012 21:40:33 +0000 (14:40 -0700)]
drivers/video/backlight/ot200_bl.c: use devm_ functions
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_kzalloc of these functions
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Mon, 30 Jul 2012 21:40:27 +0000 (14:40 -0700)]
vsprintf: add support of '%*ph[CDN]'
There are many places in the kernel where the drivers print small buffers
as a hex string. This patch adds a support of the variable width buffer
to print it as a hex string with a delimiter. The idea came from Pavel
Roskin here: http://www.digipedia.pl/usenet/thread/18835/17449/
Sample output of
pr_info("buf[%d:%d] %*phC\n", from, len, len, &buf[from]);
could be look like this:
[ 0.726130] buf[51:8] e8:16:b6:ef:e3:74:45:6e
[ 0.750736] buf[59:15] 31:81:b8:3f:35:49:06:ae:df:32:06:05:4a:af:55
[ 0.757602] buf[17:5] ac:16:d5:2c:ef
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The intent behind this behavior was to return "pK-error" in cases where
the %pK format specifier was used in interrupt context, because the
CAP_SYSLOG check wouldn't be meaningful. Clearly this should only apply
when kptr_restrict is actually enabled though.
Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com> Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 30 Jul 2012 21:40:21 +0000 (14:40 -0700)]
printk: remove the now unnecessary "C" annotation for KERN_CONT
Now that all KERN_<LEVEL> uses are prefixed with ASCII SOH, there is no
need for a KERN_CONT. Keep it backward compatible by adding #define
KERN_CONT ""
Reduces kernel image size a thousand bytes.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 30 Jul 2012 21:40:13 +0000 (14:40 -0700)]
btrfs: use printk_get_level and printk_skip_level, add __printf, fix fallout
Use the generic printk_get_level() to search a message for a kern_level.
Add __printf to verify format and arguments. Fix a few messages that
had mismatches in format and arguments. Add #ifdef CONFIG_PRINTK blocks
to shrink the object size a bit when not using printk.
[akpm@linux-foundation.org: whitespace tweak] Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 30 Jul 2012 21:40:12 +0000 (14:40 -0700)]
arch: remove direct definitions of KERN_<LEVEL> uses
Add #include <linux/kern_levels.h> so that the #define KERN_<LEVEL> macros
don't have to be duplicated.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kay Sievers <kay@vrfy.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 30 Jul 2012 21:40:09 +0000 (14:40 -0700)]
printk: add generic functions to find KERN_<LEVEL> headers
The current form of a KERN_<LEVEL> is "<.>".
Add printk_get_level and printk_skip_level functions to handle these
formats.
These functions centralize tests of KERN_<LEVEL> so a future modification
can change the KERN_<LEVEL> style and shorten the number of bytes consumed
by these headers.
[akpm@linux-foundation.org: fix build error and warning] Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NMI watchdog: fix for lockup detector breakage on resume
On the suspend/resume path the boot CPU does not go though an
offline->online transition. This breaks the NMI detector post-resume
since it depends on PMU state that is lost when the system gets
suspended.
Fix this by forcing a CPU offline->online transition for the lockup
detector on the boot CPU during resume.
To provide more context, we enable NMI watchdog on Chrome OS. We have
seen several reports of systems freezing up completely which indicated
that the NMI watchdog was not firing for some reason.
Debugging further, we found a simple way of repro'ing system freezes --
issuing the command 'tasket 1 sh -c "echo nmilockup > /proc/breakme"'
after the system has been suspended/resumed one or more times.
With this patch in place, the system freeze result in panics, as
expected.
These panics provide a nice stack trace for us to debug the actual issue
causing the freeze.
[akpm@linux-foundation.org: fiddle with code comment]
[akpm@linux-foundation.org: make lockup_detector_bootcpu_resume() conditional on CONFIG_SUSPEND]
[akpm@linux-foundation.org: fix section errors] Signed-off-by: Sameer Nanda <snanda@chromium.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Don Zickus <dzickus@redhat.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
panic_lock is meant to ensure that panic processing takes place only on
one cpu; if any of the other cpus encounter a panic, they will spin
waiting to be shut down.
However, this causes a regression in this scenario:
1. Cpu 0 encounters a panic and acquires the panic_lock
and proceeds with the panic processing.
2. There is an interrupt on cpu 0 that also encounters
an error condition and invokes panic.
3. This second invocation fails to acquire the panic_lock
and enters the infinite while loop in panic_smp_self_stop.
Thus all panic processing is stopped, and the cpu is stuck for eternity
in the while(1) inside panic_smp_self_stop.
To address this, disable local interrupts with local_irq_disable before
acquiring the panic_lock. This will prevent interrupt handlers from
executing during the panic processing, thus avoiding this particular
problem.
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clk_get() returns -ENOENT on error and some careless caller might
dereference it without error checking:
In mxc_rnga_remove():
struct clk *clk = clk_get(&pdev->dev, "rng");
// ...
clk_disable(clk);
Since it's insane to audit the lots of existing and future clk users,
let's add a check in the callee to avoid kernel panic and warn about
any buggy user.
Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
usb/host/r8a66597: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gadget/r8a66597: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gadget/m66592: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
net/stmmac: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
This also fixes error paths of probe(), as a goto is required in this
patch.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
net/c_can: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ata/pata_arasan: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
usb/musb: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
musb also has these dummy macros defined locally. Remove them as they
aren't required anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
usb/marvell: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
Marvell usb also has these dummy macros defined locally. Remove them as
they aren't required anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
i2c/i2c-pxa: remove conditional compilation of clk code
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.
pxa i2c also has these dummy macros defined locally. Remove them as they
aren't required anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many drivers are shared between architectures that may or may not have
HAVE_CLK selected for them. To remove compilation errors for them we
enclose clk_*() calls in these drivers within #ifdef CONFIG_HAVE_CLK,
#endif.
This patch removes the need of these CONFIG_HAVE_CLK statements, by
introducing dummy routines when HAVE_CLK is not selected by platforms.
So, definition of these routines will always be available. These calls
will return error for platforms that don't select HAVE_CLK.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Garzik <jgarzik@redhat.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kautuk Consul [Mon, 30 Jul 2012 21:39:25 +0000 (14:39 -0700)]
avr32/mm/fault.c: port OOM changes to do_page_fault
Commits d065bd810b6d ("mm: retry page fault when blocking on disk
transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.
These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.
Port these changes to AVR32.
[akpm@linux-foundation.org: fix comment layout] Signed-off-by: Mohd. Faris <mohdfarisq2010@gmail.com> Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Bolle [Mon, 30 Jul 2012 21:39:24 +0000 (14:39 -0700)]
alpha: remove mysterious if zero-ed out includes
There's a small group of odd looking includes in smc37c669.c. These
includes appear to be if zero-ed out ever since they were added to the
tree (in v2.1.89). Their purpose is unclear to me. Perhaps they were
used in someones build system. Whatever their purpose was, nothing else
uses something comparable. This entire if zero-ed out block might as well
be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kautuk Consul [Mon, 30 Jul 2012 21:39:21 +0000 (14:39 -0700)]
xtensa/mm/fault.c: port OOM changes to do_page_fault
Commits d065bd810b6d ("mm: retry page fault when blocking on disk
transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.
These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.
Port these changes to xtensa.
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Acked-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the suid_dumpable sysctl is set to "2", and there is no core dump
pipe defined in the core_pattern sysctl, a local user can cause core files
to be written to root-writable directories, potentially with
user-controlled content.
This means an admin can unknowningly reintroduce a variation of
CVE-2006-2451, allowing local users to gain root privileges.
While cron has been fixed to abort reading a file when there is any
parse error, there are still other sensitive directories that will read
any file present and skip unparsable lines.
Instead of introducing a suid_dumpable=3 mode and breaking all users of
mode 2, this only disables the unsafe portion of mode 2 (writing to disk
via relative path). Most users of mode 2 (e.g. Chrome OS) already use
a core dump pipe handler, so this change will not break them. For the
situations where a pipe handler is not defined but mode 2 is still
active, crash dumps will only be written to fully qualified paths. If a
relative path is defined (e.g. the default "core" pattern), dump
attempts will trigger a printk yelling about the lack of a fully
qualified path.
Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@linux.intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: James Morris <james.l.morris@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ntfs: remove references to long gone super operations and unimplemented methods
->delete_inode(), ->write_super_lockfs(), ->unlockfs() are gone so remove
refereces to them in the NTFS code. Remove unnecessary comments about
unimplemented methods while at it (suggested by Christoph Hellwig).
Noticed while cleaning up the fsfreeze mess.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
prctl: remove redunant assignment of "error" to zero
Just setting the "error" to error number is enough on failure and It
doesn't require to set "error" variable to zero in each switch case,
since it was already initialized with zero. And also removed return 0
in switch case with break statement
pcdp: use early_ioremap/early_iounmap to access pcdp table
efi_setup_pcdp_console() is called during boot to parse the HCDP/PCDP
EFI system table and setup an early console for printk output. The
routine uses ioremap/iounmap to setup access to the HCDP/PCDP table
information.
The call to ioremap is happening early in the boot process which leads
to a panic on x86_64 systems:
This replaces the calls to ioremap/iounmap in efi_setup_pcdp_console()
with calls to early_ioremap/early_iounmap which can be called during
early boot.
This patch was tested on an x86_64 prototype system which uses the
HCDP/PCDP table for early console setup.
Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Khalid Aziz <khalid.aziz@hp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Mon, 30 Jul 2012 21:39:04 +0000 (14:39 -0700)]
mm: fix wrong argument of migrate_huge_pages() in soft_offline_huge_page()
Commit a6bc32b89922 ("mm: compaction: introduce sync-light migration for
use by compaction") changed the declaration of migrate_pages() and
migrate_huge_pages().
But it missed changing the argument of migrate_huge_pages() in
soft_offline_huge_page(). In this case, we should call
migrate_huge_pages() with MIGRATE_SYNC.
Additionally, there is a mismatch between type the of argument and the
function declaration for migrate_pages().
Signed-off-by: Joonsoo Kim <js1304@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull embedded i2c changes from Wolfram Sang:
"Changes for the "embedded" part of the I2C subsystem:
- lots of devicetree conversions of drivers (and preparations for
that)
- big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin
- Rafael's struct dev_pm_ops conversion patches for I2C
- usual driver cleanups and fixes
All patches have been in linux-next for an apropriate time and all
patches touching files outside of i2c-folders should have proper acks
from the maintainers."
* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits)
Revert "i2c: tegra: convert normal suspend/resume to *_noirq"
I2C: MV64XYZ: Add Device Tree support
i2c: stu300: use devm managed resources
i2c: i2c-ocores: support for 16bit and 32bit IO
V4L/DVB: mfd: use reg_shift instead of regstep
i2c: i2c-ocores: Use reg-shift property
i2c: i2c-ocores: DT bindings and minor fixes.
i2c: mv64xxxx: remove EXPERIMENTAL tag
i2c-s3c2410: Use plain pm_runtime_put()
i2c: s3c2410: Fix pointer type passed to of_match_node()
i2c: mxs: Set I2C timing registers for mxs-i2c
i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file.
i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data.
i2c:i2c-bfin-twi: include twi head file
i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load.
i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly.
i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves.
i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios".
i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios.
i2c-mv64xxxx: allow more than one driver instance
...
Pull networking fixes from David Miller:
"Several bug fixes, some to new features appearing in this merge
window, some that have been around for a while.
I have a short list of known problems that need to be sorted out, but
all of them can be solved easily during the run up to 3.6-final.
I'll be offline until Sunday afternoon, but nothing need hold up
3.6-rc1 and the close of the merge window, networking wise, at this
point.
1) Fix interface check in ipv4 TCP early demux, from Eric Dumazet.
2) Fix a long standing bug in TCP DMA to userspace offload that can
hang applications using MSG_TRUNC, from Jiri Kosina.
3) Don't allow TCP_USER_TIMEOUT to be negative, from Hangbin Liu.
4) Don't use GFP_KERNEL under spinlock in kaweth driver, from Dan
Carpenter"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
tcp: perform DMA to userspace only if there is a task waiting for it
Revert "openvswitch: potential NULL deref in sample()"
ipv4: fix TCP early demux
net: fix rtnetlink IFF_PROMISC and IFF_ALLMULTI handling
USB: kaweth.c: use GFP_ATOMIC under spin_lock
tcp: Add TCP_USER_TIMEOUT negative value check
bcma: add missing iounmap on error path
bcma: fix regression in interrupt assignment on mips
mac80211_hwsim: fix possible race condition in usage of info->control.sta & control.vif
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The usual collection of bug fixes and optimizations. Perhaps of
greatest note is a speed up for parallel, non-allocating DIO writes,
since we no longer take the i_mutex lock in that case.
For bug fixes, we fix an incorrect overhead calculation which caused
slightly incorrect results for df(1) and statfs(2). We also fixed
bugs in the metadata checksum feature."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: undo ext4_calc_metadata_amount if we fail to claim space
ext4: don't let i_reserved_meta_blocks go negative
ext4: fix hole punch failure when depth is greater than 0
ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()
ext4: weed out ext4_write_super
ext4: remove unnecessary superblock dirtying
ext4: convert last user of ext4_mark_super_dirty() to ext4_handle_dirty_super()
ext4: remove useless marking of superblock dirty
ext4: fix ext4 mismerge back in January
ext4: remove dynamic array size in ext4_chksum()
ext4: remove unused variable in ext4_update_super()
ext4: make quota as first class supported feature
ext4: don't take the i_mutex lock when doing DIO overwrites
ext4: add a new nolock flag in ext4_map_blocks
ext4: split ext4_file_write into buffered IO and direct IO
ext4: remove an unused statement in ext4_mb_get_buddy_page_lock()
ext4: fix out-of-date comments in extents.c
ext4: use s_csum_seed instead of i_csum_seed for xattr block
ext4: use proper csum calculation in ext4_rename
ext4: fix overhead calculation used by ext4_statfs()
...
projects / karo-tx-linux.git / log