This patch introduces a work around for cdc-acm devices which are
low speed contrary to the specification, which requires bulk endpoints
which are banned in low speed and converted by usbcore to virtual
interrupt endpoints if they are used nevertheless.
David Brownell [Wed, 1 Jul 2009 10:36:16 +0000 (03:36 -0700)]
USB: musb: silence "suspend as a_wait_vrise is_active" msgs
Get rid of some obnoxious and inappropriate messaging, mostly on
DaVinci, when usbcore tries to autosuspend a root hub if just a
mini/micro-A connector is connected. Symptom: endless stream of
messages reading like:
musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1
Improve that musb bus suspend primitive a bit. Take advantage of
this call to update the OTG state machine if appropriate, moving
the device out of the A_WAIT_VRISE state. There's basically no
timer for that state transition just now, except with tusb6010;
that can make trouble.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Wed, 1 Jul 2009 10:43:58 +0000 (03:43 -0700)]
USB: gadget: pxa25x compiler warning fix
Fix config-dependent compiler warning:
CC drivers/usb/gadget/pxa25x_udc.o
drivers/usb/gadget/pxa25x_udc.c: In function 'pxa25x_udc_irq':
drivers/usb/gadget/pxa25x_udc.c:1806: warning: array subscript is above array bounds
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin Hilman [Wed, 1 Jul 2009 10:33:46 +0000 (03:33 -0700)]
USB: musb: davinci dm6446evm GPIO renumbering
Numbering for GPIOs on the pcf857x chips on the dm644x EVM board
changed when DaVinci chips with more GPIOs were supported. Update
the GPIO number used for nVBUS_DRV.
Longer term, we need a better abstraction of board-specific setup in
this code so we're not hard-coding board specific GPIOs into the
driver, but for now this at least gets it back to working with
mainline davinci core code.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[ dbrownell@users.sourceforge.net: remove OID_802_3_MAXIMUM_LIST_SIZE
setting ... it was bogus, this code only handles one entry, not 32.
And we don't know what would break if we lied about that... ]
Signed-off-by: Helen Chen <helen.chen@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arnd Bergmann [Fri, 19 Jun 2009 12:35:34 +0000 (05:35 -0700)]
USB: buildfix ppc randconfig
We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.
[ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
commit 1a1fab513734b3a4fca1bee8229e5ff7e1cb873c accidentally added the
device id to both tables in the driver, which causes problems as this is
only a single port device, not a multiple port device.
Alan Stern [Thu, 11 Jun 2009 18:56:22 +0000 (14:56 -0400)]
USB: EHCI: update toggle state for linked QHs
This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs"
patch. Since an HCD's endpoint_reset method can be called in
interrupt context, it mustn't assume that interrupts are enabled or
that it can sleep.
So we revert to the original way of refreshing QHs' toggle bits. Now
the endpoint_reset method merely clears the toggle flag in the device
structure (as was done before) and starts an async QH unlink. When the
QH is linked again, after the unlink finishes and an URB is queued,
the qh_refresh() routine will update the QH's toggle bit.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: David <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: pl2303: New vendor and product id for the prolific driver
I recently bought a PC interface for the Cressi Edy dive computer
(www.cressi.it) and discovered that it uses the pl2303 chip, albeit
with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in
the process of writing a linux software for such device (cressi only
provides a windows software), I patched the pl2303 linux driver to
have the interface recognized. I am submitting you the patch (very
basic) for inclusion in next kernel version.
Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
The current s626 comedi driver in staging conflicts with philips SAA7146
media/dvb based cards, because it claims the same vendor:device pci id
for all subdevice/subvendor ids. What happens is that for people that have a
philips SAA7146 media/dvb based card, s626 if available gets loaded by udev
and makes system freeze (https://qa.mandriva.com/show_bug.cgi?id=51445).
The s626 driver shouldn't claim all 1131:7146 devices. Fix this by
specifying specific known subvendor:subdevice ids in its pci id table
list.
Also s626_attach is modified to use now pci_get_subsys instead of
pci_get_device as reported by Ian Abbott, and now we loop over pci id
table entries in case more ids are added in the future.
Reference: http://lkml.org/lkml/2009/6/16/552
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Aloni [Wed, 24 Jun 2009 19:34:39 +0000 (22:34 +0300)]
Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
(adapted from the rtl8187se patch)
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
Dan Aloni [Sat, 20 Jun 2009 13:32:22 +0000 (16:32 +0300)]
Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
I repeatedly get __stack_chk_fail panic()s with this driver before
applying the attached fix.
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
Loosely based on Alexander's patch for rtl8187se, untested.
Cc: Alexander Beregalov <a.beregalov@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this build errors:
jr3_pci.c:739: error: 'jiffies' undeclared
jr3_pci.c:748: error: implicit declaration of function 'msecs_to_jiffies'
jr3_pci.c:763: error: implicit declaration of function 'add_timer'
jr3_pci.c:790: error: implicit declaration of function 'init_timer'
jr3_pci.c:951: error: implicit declaration of function 'del_timer_sync'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
You cannot take a DMA address, cast it to a _pointer to_ a DMA address,
and then regard it as a virtual address of the transfer buffer.
However, finding the right virtual address was too hard for me,
so I just stubbed it with NULL. At least usbmon won't oops then
(it will not show any data but it's better than crashing).
Also, too big a buffer was allocated elsewhere.
And since we're at it, drop clearly unnecessary usb_buffer_alloc too,
leaving it where it may be useful.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
dev_set/get_drvdata() should be used instead, as driver_data is going
away.
Cc: Imre Deak <imre.deak@nokia.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Trilok Soni <soni.trilok@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Contreras <felipe.contreras@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Heiko Carstens [Thu, 11 Jun 2009 13:14:40 +0000 (15:14 +0200)]
partitions: fix broken uevent_suppress conversion
git commit f67f129e "Driver core: implement uevent suppress in kobject"
contains this chunk for fs/partitions/check.c:
/* suppress uevent if the disk supresses it */
- if (!ddev->uevent_suppress)
+ if (!dev_get_uevent_suppress(pdev))
kobject_uevent(&pdev->kobj, KOBJ_ADD);
However that should have been
- if (!ddev->uevent_suppress)
+ if (!dev_get_uevent_suppress(ddev))
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ming Lei <tom.leiming@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
devres: WARN() and return, don't crash on device_del() of uninitialized device
I just debugged an obscure crash caused by a device_del() of a all NULL'd
out struct device (in usb-serial) and found that a patch like this one would
have saved me time (in addition to improved chances of a bug report from
users hitting similar driver bugs).
[akpm@linux-foundation.org: cleanup] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6
* 'kmemleak' of git://linux-arm.org/linux-2.6:
kmemleak: Remove alloc_bootmem annotations introduced in the past
kmemleak: Add callbacks to the bootmem allocator
kmemleak: Allow partial freeing of memory blocks
kmemleak: Trace the kmalloc_large* functions in slub
kmemleak: Scan objects allocated during a scanning episode
kmemleak: Do not acquire scan_mutex in kmemleak_open()
kmemleak: Remove the reported leaks number limitation
kmemleak: Add more cond_resched() calls in the scanning thread
kmemleak: Renice the scanning thread to +10
fs/afs/dir.c: In function 'afs_d_revalidate':
fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function
fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function
by marking the 'fid' variable as an uninitialized_var. The problem is
that gcc doesn't always manage to work out that fid is always set on the
path through the function that uses it.
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Julien Tinnes [Fri, 26 Jun 2009 18:27:40 +0000 (20:27 +0200)]
personality: fix PER_CLEAR_ON_SETID
We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't
include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO.
The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE.
We believe it is important to add MMAP_PAGE_ZERO, because by using this
personality it is possible to have the first page mapped inside a
process running as setuid root. This could be used in those scenarios:
- Exploiting a NULL pointer dereference issue in a setuid root binary
- Bypassing the mmap_min_addr restrictions of the Linux kernel: by
running a setuid binary that would drop privileges before giving us
control back (for instance by loading a user-supplied library), we
could get the first page mapped in a process we control. By further
using mremap and mprotect on this mapping, we can then completely
bypass the mmap_min_addr restrictions.
Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added
since on x86 32bits it will in practice disable most of the address
space layout randomization (only the stack will remain randomized).
Signed-off-by: Julien Tinnes <jt@cr0.org> Signed-off-by: Tavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Acked-by: Christoph Hellwig <hch@infradead.org> Acked-by: Kees Cook <kees@ubuntu.com> Acked-by: Eugene Teo <eugene@redhat.com>
[ Shortened lines and fixed whitespace as per Christophs' suggestion ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x
This causes kernel images that don't run init to completion with certain
broken gcc versions.
This fixes kernel bugzilla entry:
http://bugzilla.kernel.org/show_bug.cgi?id=13012
I suspect the gcc problem is this:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230
Fix the problem by using the -fno-strict-overflow flag instead, which
not only does not exist in the known-to-be-broken versions of gcc (it
was introduced later than fwrapv), but seems to be much less disturbing
to gcc too: the difference in the generated code by -fno-strict-overflow
are smaller (compared to using neither flag) than when using -fwrapv.
Reported-by: Barry K. Nathan <barryn@pobox.com> Pushed-by: Frans Pop <elendil@planet.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sit: fix regression: do not release skb->dst before xmit
The sit module makes use of skb->dst in it's xmit function, so since 93f154b594fe47 ("net: release dst entry in dev_hard_start_xmit()") sit
tunnels are broken, because the flag IFF_XMIT_DST_RELEASE is not
unset.
This patch unsets that flag for sit devices to fix this
regression.
Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 8 Jul 2009 14:20:42 +0000 (14:20 +0000)]
net: ip_push_pending_frames() fix
After commit 2b85a34e911bf483c27cfdd124aeb1605145dc80
(net: No more expensive sock_hold()/sock_put() on each tx)
we do not take any more references on sk->sk_refcnt on outgoing packets.
I forgot to delete two __sock_put() from ip_push_pending_frames()
and ip6_push_pending_frames().
Reported-by: Emil S Tantilov <emils.tantilov@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Emil S Tantilov <emils.tantilov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 8 Jul 2009 19:36:05 +0000 (19:36 +0000)]
net: sk_prot_alloc() should not blindly overwrite memory
Some sockets use SLAB_DESTROY_BY_RCU, and our RCU code correctness
depends on sk->sk_nulls_node.next being always valid. A NULL
value is not allowed as it might fault a lockless reader.
Current sk_prot_alloc() implementation doesnt respect this hypothesis,
calling kmem_cache_alloc() with __GFP_ZERO. Just call memset() around
the forbidden field.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT
Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port
probing to the preferred DMI probe method.
Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: dan <dan@deeog.com> Tested-by: Nygel Lyndley <nygel.lyndley@gmail.com> Tested-by: Dmitriy Fedchenko <dmitriy-fedc@yandex.ru> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
futexes: Fix infinite loop in get_futex_key() on huge page
get_futex_key() can infinitely loop if it is called on a
virtual address that is within a huge page but not aligned to
the beginning of that page. The call to get_user_pages_fast
will return the struct page for a sub-page within the huge page
and the check for page->mapping will always fail.
The fix is to call compound_head on the page before checking
that it's mapped.
Paul Turner [Sat, 11 Jul 2009 00:05:16 +0000 (17:05 -0700)]
sched: Fix bug in SCHED_IDLE interaction with group scheduling
One of the isolation modifications for SCHED_IDLE is the
unitization of sleeper credit. However the check for this
assumes that the sched_entity we're placing always belongs to a
task.
This is potentially not true with group scheduling and leaves
us rummaging randomly when we try to pull the policy.
with the extra "<6>" being KERN_INFO. This happens because the
printk in show_signal_msg() started with KERN_CONT and then
used "%s" to pass in the real level; and KERN_CONT is no longer
an empty string, and printk only pays attention to the level at
the very beginning of the format string.
Therefore, remove the KERN_CONT from this printk, since it is
now actively causing problems (and never really made any
sense).
commit 5404ac8e4418ab3d254950ee4f9bcafc1da20b4a ("isofs: cleanup mount
option processing") missed conversion of joliet option flag resulting
in non-working Joliet support.
CC: walt <w41ter@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Thu, 9 Jul 2009 12:36:22 +0000 (13:36 +0100)]
tty: Fix USB kref leak
The sysrq code acquired a kref leak. Fix it by passing the tty separately
from the caller (thus effectively using the callers kref which all the
callers hold anyway)
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: fix corruption dump
UBIFS: clean up free space checking
UBIFS: small amendments in the LEB scanning code
UBIFS: dump a little more in case of corruptions
MAINTAINERS: update ahunter's e-mail address
UBIFS: allow more than one volume to be mounted
UBIFS: fix assertion warning
UBIFS: minor spelling and grammar fixes
UBIFS: fix 64-bit divisions in debug print
UBIFS: few spelling fixes
UBIFS: set write-buffer timout to 3-5 seconds
UBIFS: slightly optimize write-buffer timer usage
UBIFS: improve debugging messaged
UBIFS: fix integer overflow warning
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
osdblk: Adjust queue limits to lower device's limits
osdblk: a Linux block device for OSD objects
MAINTAINERS: Add osd maintained files (F:)
exofs: Avoid using file_fsync()
exofs: Remove IBM copyrights
exofs: Fix bio leak in error handling path (sync read)
Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
drm/i915: Fix for LVDS VBT change on IGDNG
drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
drm/i915: Refactor calls to unmap_mapping_range
drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
drm: Disable the unused connectors explicitly when resuming with KMS.
drm/i915: Restore the KMS modeset for every activated CRTC
drm/i915: Fix harmless warning from patch merged after i2c rework.
drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
drm/i915: Check the LID device to decide whether the LVDS should be initialized
drm/i915: Move lock to more reasonable location
drm/i915: Add gtt_offset to gem object list debugfs output
drm/i915: Remove gtt_bound from drm_i915_gem_object
drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.
drm/i915: crt fetch EDID by DVI-I converter on G4x platform
drm/i915: Don't update display FIFO watermark on IGDNG
drm/i915: Adjust DisplayPort clocks to use 96MHz reference
drm/i915: Make driver less chatty
drm/i915: fix up a raw 64bit divide
drm/i915: enable sdvo lvds scaling function.
drm/i915: Set SSC frequency for 8xx chips correctly
...
Larry Finger [Sat, 11 Jul 2009 01:06:42 +0000 (20:06 -0500)]
fuse: Fix build error
When building v2.6.31-rc2-344-g69ca06c, the following build errors are
found due to missing includes:
CC [M] fs/fuse/dev.o
fs/fuse/dev.c: In function ‘request_end’:
fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function)
...
fs/nfs/write.c: In function ‘nfs_set_page_writeback’:
fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function)
Signed-off-by: Larry Finger@lwfinger.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix disorder in cp count on error during deleting checkpoints
nilfs2: fix lockdep warning between regular file and inode file
nilfs2: fix incorrect KERN_CRIT messages in case of write failures
nilfs2: fix hang problem of log writer which occurs after write failures
nilfs2: remove unlikely directive causing mis-conversion of error code
Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
dma-debug: Fix the overlap() function to be correct and readable
oprofile: reset bt_lost_no_mapping with other stats
x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon
signals: declare sys_rt_tgsigqueueinfo in syscalls.h
rcu: Mark Hierarchical RCU no longer experimental
dma-debug: Put all hash-chain locks into the same lock class
dma-debug: fix off-by-one error in overlap function
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
perf report: Add "Fractal" mode output - support callchains with relative overhead rate
perf_counter tools: callchains: Manage the cumul hits on the fly
perf report: Change default callchain parameters
perf report: Use a modifiable string for default callchain options
perf report: Warn on callchain output request from non-callchain file
x86: atomic64: Inline atomic64_read() again
x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative()
x86: atomic64: Improve atomic64_xchg()
x86: atomic64: Export APIs to modules
x86: atomic64: Improve atomic64_read()
x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP
x86: atomic64: Fix unclean type use in atomic64_xchg()
x86: atomic64: Make atomic_read() type-safe
x86: atomic64: Reduce size of functions
x86: atomic64: Improve atomic64_add_return()
x86: atomic64: Improve cmpxchg8b()
x86: atomic64: Improve atomic64_read()
x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file
x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too
perf report: Annotate variable initialization
...
Peter Zijlstra [Fri, 10 Jul 2009 12:57:56 +0000 (14:57 +0200)]
sched: INIT_PREEMPT_COUNT
Pull the initial preempt_count value into a single
definition site.
Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.
The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.
Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhenyu Wang [Fri, 10 Jul 2009 06:39:59 +0000 (14:39 +0800)]
drm/i915: Fix for LVDS VBT change on IGDNG
IGDNG mobile chip's LVDS data block removes panel fitting
register definition. So this fixes offset for LVDS timing
block parsing. Thanks for Michael Fu to catch this.
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Fri, 10 Jul 2009 20:02:26 +0000 (13:02 -0700)]
drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
As of 52dc7d32b88156248167864f77a9026abe27b432, we could leave an old
linear GTT mapping in place, so that apps trying to GTT-mapped write in
tiled data wouldn't get the fence added, and garbage would get displayed.
dma-debug: Fix the overlap() function to be correct and readable
Linus noticed how unclean and buggy the overlap() function is:
- It uses convoluted (and bug-causing) positive checks for
range overlap - instead of using a more natural negative
check.
- Even the positive checks are buggy: a positive intersection
check has four natural cases while we checked only for three,
missing the (addr < start && addr2 == end) case for example.
- The variables are mis-named, making it non-obvious how the
check was done.
- It needlessly uses u64 instead of unsigned long. Since these
are kernel memory pointers and we explicitly exclude highmem
ranges anyway we cannot ever overflow 32 bits, even if we
could. (and on 64-bit it doesnt matter anyway)
All in one, this function needs a total revamp. I used Linus's
suggestions minus the paranoid checks (we cannot overflow really
because if we get totally bad DMA ranges passed far more things
break in the systems than just DMA debugging). I also fixed a
few other small details i noticed.
x86: multi pci root bus with different io resource range, on
64-bit
It turns out that:
1. that AMD-based systems have two HT chains.
2. BIOS doesn't allocate resources for BAR 6 of devices under 8132 etc
3. that multi-peer-root patch will try to split root resources to peer
root resources according to PCI conf of NB
4. PCI core assigns unassigned resources, but they overlap with BARs
that are used by ioapic addr of io4 and 8132.
The reason: at that point ioapic address are not inserted yet. Solution
is to insert ioapic resources into the tree a bit earlier.
Reported-by: Stephen Frost <sfrost@snowman.net> Reported-and-Tested-by: dann frazier <dannf@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@jbarnes-g45.(none)>
drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
In KMS mode we now use the normal mode-setting paths to set the modes
back to the current configuration, so we don't need to also run the more
limited non-KMS implementation of modesetting for resume.
drm/i915: Restore the KMS modeset for every activated CRTC
Restore the modeset for every activated CRTC in course of resume.
This is realized by calling the function of drm_helper_resume_force_mode.
Note: it is meaningful only for the KMS mode.
Eric Anholt [Thu, 2 Jul 2009 16:30:50 +0000 (09:30 -0700)]
drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
This is seen on some G41 systems, where the BIOS will consume all but
a few KB of the aperture. This should be bad for all operating systems, as
it means that the OS can't dynamically manage memory between graphics and
the rest of the system, and OSes that did static memory management
statically add memory in addition to the BIOS allocation anyway. So, instead
of working around it, just fail out verbosely.
fd.o bug #21574
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix trace_print_seq()
kprobes: No need to unlock kprobe_insn_mutex
tracing/fastboot: Document the need of initcall_debug
trace_export: Repair missed fields
tracing: Fix stack tracer sysctl handling
In case memory is scarce, we now default to oom_cfqq. Once memory is
available again, we should allocate a new cfqq and stop using oom_cfqq for
a particular io context.
Once a new request comes in, check if we are using oom_cfqq, and if yes,
try to allocate a new cfqq.
Tested the patch by forcing the use of oom_cfqq and upon next request thread
realized that it was using oom_cfqq and it allocated a new cfqq.
=
The semantics of SG_DXFER_TO_FROM_DEV were:
- copy user space buffer to kernel (LLD) buffer
- do SCSI command which is assumed to be of the DATA_IN
(data from device) variety. This would overwrite
some or all of the kernel buffer
- copy kernel (LLD) buffer back to the user space.
The idea was to detect short reads by filling the original
user space buffer with some marker bytes ("0xec" it would
seem in this report). The "resid" value is a better way
of detecting short reads but that was only added this century
and requires co-operation from the LLD.
=
This patch changes the block layer mapping API to support this
semantics. This simply adds another field to struct rq_map_data and
enables __bio_copy_iov() to copy data from user space even with READ
requests.
It's better to add the flags field and kills null_mapped and the new
from_user fields in struct rq_map_data but that approach makes it
difficult to send this patch to stable trees because st and osst
drivers use struct rq_map_data (they were converted to use the block
layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer
mapping API.
zhou sf reported this regiression and tested this patch:
Currently, blk_scsi_ioctl_init() is not called since it lacks
an initcall marking. This causes the command table to be
unitialized, hence somce commands are block when they should
not have been.
Fix congestion_wait() sync/async vs read/write confusion
Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.
git commit 507e1231 "timer stats: Optimize by adding quick check to
avoid function calls" added one wrong check so that one unnecessary
function call isn't elimated.
time_stats_account_hrtimer() checks if timer->start_pid isn't
initialized in order to find out if timer_stats_update_stats() should
be called. However start_pid is initialized with -1 instead of 0, so
that the function call always happens.
Check timer->start_site like in timer_stats_account_timer() to fix
this.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 10 Jul 2009 12:57:05 +0000 (14:57 +0200)]
hrtimer: Fix migration expiry check
The timer migration expiry check should prevent the migration of a
timer to another CPU when the timer expires before the next event is
scheduled on the other CPU. Migrating the timer might delay it because
we can not reprogram the clock event device on the other CPU. But the
code implementing that check has two flaws:
- for !HIGHRES the check compares the expiry value with the clock
events device expiry value which is wrong for CLOCK_REALTIME based
timers.
- the check is racy. It holds the hrtimer base lock of the target CPU,
but the clock event device expiry value can be modified
nevertheless, e.g. by an timer interrupt firing.
The !HIGHRES case is easy to fix as we can enqueue the timer on the
cpu which was selected by the load balancer. It runs the idle
balancing code once per jiffy anyway. So the maximum delay for the
timer is the same as when we keep the tick on the current cpu going.
In the HIGHRES case we can get the next expiry value from the hrtimer
cpu_base of the target CPU and serialize the update with the cpu_base
lock. This moves the lock section in hrtimer_interrupt() so we can set
next_event to KTIME_MAX while we are handling the expired timers and
set it to the next expiry value after we handled the timers under the
base lock. While the expired timers are processed timer migration is
blocked because the expiry time of the timer is always <= KTIME_MAX.
Also remove the now useless clockevents_get_next_event() function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 9 Jul 2009 11:52:32 +0000 (13:52 +0200)]
hrtimer: migration: do not check expiry time on current CPU
The timer migration code needs to check whether the expiry time of the
timer is before the programmed clock event expiry time when the timer
is enqueued on another CPU because we can not reprogram the timer
device on the other CPU. The current logic checks the expiry time even
if we enqueue on the current CPU when nohz_get_load_balancer() returns
current CPU. This might lead to an endless loop in the expiry check
code when the expiry time of the timer is before the current
programmed next event.
Check whether nohz_get_load_balancer() returns current CPU and skip
the expiry check if this is the case.
The bug was triggered from the networking code. The patch fixes the
regression http://bugzilla.kernel.org/show_bug.cgi?id=13738
(Soft-Lockup/Race in networking in 2.6.31-rc1+195)
Cc: Arun Bharadwaj <arun@linux.vnet.ibm.com Tested-by: Joao Correia <joaomiguelcorreia@gmail.com> Tested-by: Andres Freund <andres@anarazel.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jaroslav Kysela [Fri, 10 Jul 2009 10:27:31 +0000 (12:27 +0200)]
ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checking
On some IbexPeak systems with ALC889A errors like "azx_get_response
timeout, switching to polling mode: last cmd=0xaf9f000b" are produced,
because non-existent codec #10 is wrongly accessed.
The problem is that snd_hda_get_connections() returns out-of-range result
for NID 0x1c (something like 0xf8f9 or 0xffff).
This patch adds a check to alc880_parse_auto_config() to avoid using
of this out-of-range NIDs. A better fix maybe to improve
snd_hda_get_connections() routine to check for valid NID ranges if
NIDs are expected as result.
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>